From b0baed0655b7e32b3a1845af0f0494af258f371f Mon Sep 17 00:00:00 2001 From: Arttu Tarkiainen Date: Fri, 5 Nov 2021 12:53:54 +0000 Subject: Revert "Add Korean translation" This reverts commit 1e053058bbee09c21a132909901446694ed4d95e. Reason for revert: Remove .ts file for now, until the quality of translation is verified. Change-Id: I729b6c237ebe1b6638b27a072a2abcd11fe1394e Reviewed-by: Katja Marttila --- src/sdk/translations/ifw_ko.ts | 2771 ---------------------------------------- 1 file changed, 2771 deletions(-) delete mode 100644 src/sdk/translations/ifw_ko.ts diff --git a/src/sdk/translations/ifw_ko.ts b/src/sdk/translations/ifw_ko.ts deleted file mode 100644 index a2db492de..000000000 --- a/src/sdk/translations/ifw_ko.ts +++ /dev/null @@ -1,2771 +0,0 @@ - - - - - QInstaller::ProxyCredentialsDialog - - Dialog - 다이얼로그 - - - The proxy %1 requires a username and password. - 프록시 1%에 사용자 이름과 비밀번호가 필요합니다. - - - Username: - 사용자 이름: - - - Username - 사용자 이름 - - - Password: - 비밀번호: - - - Password - 비밀번호 - - - Proxy Credentials - 프록시 자격 증명 - - - - QInstaller::ServerAuthenticationDialog - - Server Requires Authentication - 서버 인증이 필요함 - - - You need to supply a username and password to access this site. - 이 사이트에 접근하려면 사용자 이름과 비밀번호가 필요합니다. - - - Username: - 사용자 이름: - - - Password: - 비밀번호: - - - %1 at %2 - %2의 %1 - - - - Dialog - - Http authentication required - HTTP 인증 필요 - - - You need to supply a Username and Password to access this site. - 이 사이트에 접근하려면 사용자 이름과 비밀번호가 필요합니다. - - - Username: - 사용자 이름: - - - Password: - 비밀번호: - - - %1 at %2 - %2의 %1 - - - - SettingsDialog - - Settings - 설정 - - - Network - 네트워크 - - - No proxy - 프록시 없음 - - - System proxy settings - 시스템 프록시 설정 - - - Manual proxy configuration - 수동 프록시 구성 - - - HTTP proxy: - HTTP 프록시: - - - Port: - 포트: - - - FTP proxy: - FTP 프록시: - - - Repositories - 리포지토리 - - - Add Username and Password for authentication if needed. - 필요하면 인증을 위한 사용자 이름과 비밀번호를 추가하십시오. - - - Use temporary repositories only - 임시 리포지토리만 사용 - - - Add - 추가 - - - Remove - 제거 - - - Test - 테스트 - - - Select All - 모두 선택 - - - Deselect All - 모두 선택 해제 - - - Show Passwords - 비밀번호 표시 - - - Check this to use repository during fetch. - 가져오는 중에 리포지토리를 사용하려면 확인하십시오. - - - Add the username to authenticate on the server. - 서버를 인증하려면 사용자 이름을 추가하십시오. - - - Add the password to authenticate on the server. - 서버를 인증하려면 비밀번호를 추가하십시오. - - - The server's URL that contains a valid repository. - 유효한 리포지토리가 포함되어 있는 서버 URL입니다. - - - An error occurred while testing this repository. - 이 리포지토리를 테스트하는 중에 오류가 발생했습니다. - - - The repository was tested successfully. - 리포지토리를 성공적으로 테스트했습니다. - - - Do you want to disable the repository? - 이 리포지토리를 비활성화하시겠습니까? - - - Do you want to enable the repository? - 이 리포지토리를 활성화하시겠습니까? - - - Hide Passwords - 비밀번호 숨기기 - - - Use - 사용 - - - Username - 사용자 이름 - - - Password - 비밀번호 - - - Repository - 리포지토리 - - - Default repositories - 기본 리포지토리 - - - Temporary repositories - 임시 리포지토리 - - - User defined repositories - 사용자 정의 리포지토리 - - - - QInstaller - - Invalid content in "%1". - "%1"에 올바르지 않은 내용이 있음 - - - No marker found, stopped after %1. - 마커를 찾을 수 없습니다. %1 이후에 중지되었습니다. - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Read failed after %1 bytes: %2 - %1바이트 이후 읽을 수 없음: %2 - - - Copy failed: %1 - 복사할 수 없음: %1 - - - Write failed after %1 bytes: %2 - %1바이트 이후 쓸 수 없음: %2 - - - bytes - 바이트 - - - KB - KB - - - MB - MB - - - GB - GB - - - TB - TB - - - PB - PB - - - EB - EB - - - ZB - ZB - - - YB - YB - - - Cannot remove file "%1": %2 - "1%" 파일을 제거할 수 없음: %2 - - - Cannot remove directory "%1": %2 - "1%" 디렉토리를 제거할 수 없음: %2 - - - Cannot create directory "%1". - "1%" 디렉토리를 생성할 수 없습니다. - - - Cannot copy file from "%1" to "%2": %3 - "%1"에서 "%2"에 파일을 복사할 수 없음: %3 - - - Cannot move file from "%1" to "%2": %3 - "%1"에서 "%2"에 파일을 이동할 수 없음: %3 - - - Cannot create directory "%1": %2 - "%1" 디렉토리를 생성할 수 없음: %2 - - - Cannot open temporary file: %1 - 임시 파일을 열 수 없음: %1 - - - Cannot open temporary file for template %1: %2 - %1 템플릿에 대한 임시 파일을 열 수 없음: %2 - - - Cannot copy file "%1" to "%2": %3 - "%1"에서 "%2"에 파일을 복사할 수 없음: %3 - - - Cannot copy file "%1" to "%2". - "%1"에서 "%2"에 파일을 복사할 수 없음: - - - The specified module could not be found. - 지정된 모듈을 찾을 수 없습니다. - - - - QObject - - Error acquiring admin rights - 관리자 권한 획득 중에 오류 발생 - - - Another %1 instance is already running. Wait until it finishes, close it, or restart your system. - 다른 %1 인스턴스가 이미 실행 중입니다. 완료될 때까지 기다린 다음 닫거나 시스템을 다시 시작하십시오. - - - Cannot start installer binary as updater. - 설치 관리자 바이너리를 업데이터로서 시작할 수 없습니다. - - - Cannot start installer binary as package manager. - 설치 관리자 바이너리를 패키지 관리자로서 시작할 수 없습니다. - - - Cannot start installer binary as uninstaller. - 설치 관리자 바이너리를 설치 제거 관리자로서 시작할 수 없습니다. - - - Empty repository list for option 'addRepository'. - 옵션 'addRepository'에 대한 리포지토리 목록이 비어있습니다. - - - Empty repository list for option 'addTempRepository'. - 옵션 'addTempRepository'에 대한 리포지토리 목록이 비어있습니다. - - - Empty repository list for option 'setTempRepository'. - 옵션 'setTempRepository'에 대한 리포지토리 목록이 비어있습니다. - - - Empty repository list for option 'installCompressedRepository'. - 옵션 'installCompressedRepository'에 대한 리포지토리 목록이 비어있습니다. - - - The file %1 does not exist. - %1 파일이 없습니다. - - - Arguments missing for option %1 - 옵션 %1에 대한 인수가 누락되었습니다. - - - Invalid button value %1 - 올바르지 않은 버튼 값 %1 - - - Incorrect arguments for %1 - %1에 대해 올바르지 않은 인수 - - - Please make sure that the current user has read access to file "%1" or try running %2 as an administrator. - 현재 사용자가 &quot;%1&quot; 파일에 대한 접근 권한이 있는지 확인하거나 관리자 권한으로 %2 파일을 실행해 보십시오. - - - - BinaryLayout - - Cannot seek to %1 to read the embedded meta data count. - %1을(를) 찾아서 내장된 메타데이터 개수를 읽을 수 없습니다. - - - Cannot seek to %1 to read the resource collection segment. - %1을(를) 찾아서 리소스 컬렉션 세그먼트를 읽을 수 없습니다. - - - Unexpected mismatch of meta resources. Read %1, expected: %2. - 메타 리소스에 예상과 다르게 일치하지 않는 사항이 있습니다. 읽음: %1, 예상: %2. - - - - BinaryContent - - Cannot seek to %1 to read the operation data. - %1을(를) 찾아서 작업 데이터를 읽을 수 없습니다. - - - Cannot seek to %1 to read the resource collection block. - %1을(를) 찾아서 리소스 컬렉션 블록을 읽을 수 없습니다. - - - Cannot open meta resource %1. - 메타 소스(%1)를 열 수 없습니다. - - - - QInstaller::Resource - - Cannot open resource %1 for reading. - 리소스(%1)를 읽기 위해 열 수 없습니다. - - - Read failed after %1 bytes: %2 - %1바이트 이후 읽을 수 없음: %2 - - - Write failed after %1 bytes: %2 - %1바이트 이후 쓸 수 없음: %2 - - - - ResourceCollectionManager - - Cannot open resource %1: %2 - 리소스(%1)를 열 수 없음: %2 - - - - QInstaller::Component - - Components cannot have children in updater mode. - 업데이터 모드에서는 구성요소에 하위 요소가 있으면 안 됩니다. - - - Cannot open the requested UI file "%1": %2 - 요청된 UI 파일("%1")을 열 수 없음: %2 - - - Cannot load the requested UI file "%1": %2 - 요청된 UI 파일("%1")을 로드할 수 없음: %2 - - - Cannot open the requested license file "%1": %2 - 요청된 라이선스 파일("%1")을 열 수 없음: %2 - - - Error - 오류 - - - Error: Operation %1 does not exist. - 오류: %1 작업이 없습니다. - - - Cannot resolve isDefault in %1 - %1의 isDefault를 해결할 수 없습니다. - - - Update Info: - 업데이트 정보: - - - There was an error loading the selected component. This component cannot be installed. - 선택한 구성요소를 로드하는 중에 오류가 발생했습니다. 이 구성요소를 설치할 수 없습니다. - - - - QInstaller::ComponentModel - - Component is marked for installation. - 구성요소가 설치를 위해 표시되었습니다. - - - Component is marked for uninstallation. - 구성요소가 설치 제거를 위해 표시되었습니다. - - - Component is installed. - 구성요소가 설치되었습니다. - - - Component is not installed. - 구성요소가 설치되지 않았습니다. - - - Component Name - 구성요소 이름 - - - Action - 조치 - - - Installed Version - 설치된 버전 - - - New Version - 새 버전 - - - Release Date - 출시일 - - - Size - 크기 - - - - QInstaller::ComponentSelectionPage - - Alt+A - Select default components - Alt+A - - - Def&ault - 기본(&A): - - - Select default components in the tree view. - 트리 보기에서 기본 구성요소를 선택합니다. - - - Alt+R - Reset to already installed components - Alt+R - - - &Reset - 재설정(&R) - - - Reset all components to their original selection state in the tree view. - 트리 보기에서 모든 구성요소를 원래 선택된 상태로 재설정합니다. - - - Alt+S - Select all components - Alt+S - - - &Select All - 모두 선택(&S) - - - Select all components in the tree view. - 트리 보기에서 모든 구성요소를 선택합니다. - - - Alt+D - Deselect all components - Alt+D - - - &Deselect All - 모두 선택 해제(&D) - - - Deselect all components in the tree view. - 트리 보기에서 모든 구성요소를 선택 해제합니다. - - - &Browse QBSP files - QBSP 파일 탐색(&B) - - - Select a Qt Board Support Package file to install additional content that is not directly available from the online repositories. - QBSP(Qt Board Support Package) 파일을 선택하여 온라인 리포지토리에서 직접 사용할 수 없는 추가 콘텐츠를 설치합니다. - - - Filter the enabled repository categories - 활성화된 리포지토리 범주를 필터링합니다. - - - This component will occupy approximately %1 on your hard disk drive. - 이 구성요소는 하드디스크 드라이브의 약 %1 정도를 차지합니다. - - - Open File - 파일 열기 - - - Select Components - 구성요소 선택 - - - Please select the components you want to update. - 업데이트하려는 구성요소를 선택하십시오. - - - Please select the components you want to install. - 설치하려는 구성요소를 선택하십시오. - - - Please select the components you want to uninstall. - 설치 제거하려는 구성요소를 선택하십시오. - - - Select the components to install. Deselect installed components to uninstall them. Any components already installed will not be updated. - 설치할 구성요소를 선택하십시오. 설치 제거할 설치된 구성요소를 선택 해제하십시오. 이미 설치된 모든 구성요소는 업데이트되지 않습니다. - - - Mandatory components need to be updated first before you can select other components to update. - 필수 구성요소를 먼저 업데이트해야 다른 구성요소를 업데이트하기 위해 선택할 수 있습니다. - - - - QInstaller::ComponentSelectionPagePrivate - - Filter - 필터 - - - Component Information - 구성요소 정보 - - - Error - 오류 - - - - QInstaller::ConsumeOutputOperation - - <to be saved installer key name> <executable> [argument1] [argument2] [...] - <저장할 설치 관리자 키 이름> <실행 가능> [argument1] [argument2] [...] - - - Needed installer object in %1 operation is empty. - "%1" 작업에 필요한 설치 개체가 비어 있습니다. - - - Cannot save the output of "%1" to an empty installer key value. - 빈 설치 관리자 키 값에 "%1"의 출력을 저장할 수 없습니다. - - - File "%1" does not exist or is not an executable binary. - "%1" 파일이 없거나 실행 가능한 바이너리가 아닙니다. - - - Running "%1" resulted in a crash. - "%1" 실행 중에 충돌이 발생했습니다. - - - - QInstaller::CopyDirectoryOperation - - <source> <target> ["forceOverwrite"] - <소스> <대상> ["forceOverwrite"] - - - Invalid argument in %1: Third argument needs to be forceOverwrite, if specified. - %1에 유효하지 않은 인수: 지정될 경우 세 번째 인수는 forceOverwrite해야 합니다. - - - Invalid argument in %1: Directory "%2" is invalid. - %1에 유효하지 않은 인수: "%2" 디렉토리가 유효하지 않습니다. - - - Cannot create directory "%1". - "1%" 디렉토리를 생성할 수 없습니다. - - - Failed to overwrite "%1". - "%1"을(를) 덮어쓸 수 없습니다. - - - Cannot copy file "%1" to "%2": %3 - "%1"에서 "%2"에 파일을 복사할 수 없음: %3 - - - Cannot remove file "%1". - "1%" 파일을 제거할 수 없음: - - - - QInstaller::CopyFileTask - - Invalid task item count. - 작업 아이템 개수가 유효하지 않습니다. - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Writing to file "%1" failed: %2 - "%1" 파일에 쓰기 실패: %2 - - - - QInstaller::CreateDesktopEntryOperation - - Cannot backup file "%1": %2 - "%1" 파일을 백업할 수 없음: %2 - - - Failed to overwrite file "%1". - "%1"을(를) 덮어쓸 수 없습니다. - - - Cannot write desktop entry to "%1". - "%1"에 데스크톱 항목을 쓸 수 없습니다. - - - - QInstaller::CreateLinkOperation - - Cannot create link from "%1" to "%2". - "%1"에서 "%2"에 대한 링크를 생성할 수 없습니다. - - - Cannot remove link from "%1" to "%2". - "%1"에서 "%2"에 대한 링크를 제거할 수 없습니다. - - - - QInstaller::CreateLocalRepositoryOperation - - Cannot set permissions for file "%1". - 파일 "%1"에 대한 권한을 설정할 수 없습니다. - - - Cannot remove file "%1": %2 - "1%" 파일을 제거할 수 없음: %2 - - - Cannot move file "%1" to "%2": %3 - 파일 "%1"을(를) "%2"(으)로 옮길 수 없습니다. %3 - - - Installer at "%1" needs to be an offline one. - "%1"의 설치 관리자는 오프라인용이어야 합니다. - - - Cannot create path "%1". - "%1" 경로를 생성할 수 없습니다. - - - Cannot remove directory "%1". - "1%" 디렉토리를 제거할 수 없습니다. - - - Cannot open file "%1" for reading. - "%1" 파일을 읽기 위해 열 수 없습니다. - - - Cannot read file "%1": %2 - "%1" 파일을 열 수 없음: %2 - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot create target directory: "%1". - 대상 디렉토리를 생성할 수 없음: "%1". - - - Unknown exception caught: %1. - 알 수 없는 예외 발생: %1. - - - Removing file "%1". - "%1" 파일을 제거합니다. - - - Cannot remove file "%1". - "1%" 파일을 제거할 수 없음: - - - Cannot remove directory "%1": %2 - "1%" 디렉토리를 제거할 수 없음: %2 - - - Cannot create archive "%1": %2 - "%1" 아카이브를 생성할 수 없음: %2 - - - - QInstaller::CreateShortcutOperation - - <target> <link location> [target arguments] ["workingDirectory=..."] ["iconPath=..."] ["iconId=..."] ["description=..."] - <대상> <링크 위치> [대상 인수] ["workingDirectory=..."] ["iconPath=..."] ["iconId=..."] ["description=..."] - - - Cannot create directory "%1": %2 - "%1" 디렉토리를 생성할 수 없음: %2 - - - Failed to overwrite "%1": %2 - "%1"을(를) 덮어쓸 수 없음: %2 - - - Cannot create link "%1": %2 - "%1" 링크를 생성할 수 없음: %2 - - - - QInstaller::DownloadArchivesJob - - Canceled - 취소됨 - - - Downloading hash signature failed. - 해시 서명을 다운로드하지 못했습니다. - - - Download Error - 다운로드 오류 - - - Hash verification while downloading failed. This is a temporary error, please retry. - 다운로드 중에 해시를 검증하지 못했습니다. 일시적인 오류이니 다시 시도하십시오. - - - Cannot verify Hash - 해시를 검증할 수 없음 - - - Cannot download archive %1: %2 - %1 아카이브를 다운로드할 수 없음: %2 - - - Cannot fetch archives: %1 -Error while loading %2 - 아카이브를 가져올 수 없음: %1 -%2 로드 중 오류 발생 - - - Downloading archive "%1" for component %2. - 구성요소 %2용 아카이브 "%1" 다운로드 중입니다. - - - Scheme %1 not supported (URL: %2). - %1 스킴을 지원하지 않습니다(URL: %2). - - - Cannot find component for %1. - %1용 구성요소를 찾을 수 없습니다. - - - %1 of %2 - %1/%2 - - - %1 downloaded. - %1 다운로드가 완료되었습니다. - - - %n day(s), - - %n일, - - - - %n hour(s), - - %n시간, - - - - %n minute(s) - - %n분 - - - - %n second(s) - - %n초 - - - - - %1%2%3%4 remaining. - - 남은 시간: %1%2%3%4 - - - - unknown time remaining. - - 남은 시간: 알 수 없음 - - - Archive: - - - - Total: - - - - - QInstaller::Downloader - - Target file "%1" already exists but is not a file. - 대상 파일("%1")이 이미 있지만 파일이 아닙니다. - - - Cannot open file "%1" for writing: %2 - %2 is a sentence describing the error - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - File "%1" not open for writing: %2 - %2 is a sentence describing the error. - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Writing to file "%1" failed: %2 - %2 is a sentence describing the error. - "%1" 파일에 쓰기 실패: %2 - - - Redirect loop detected for "%1". - "%1"에 대한 리디렉션 루프가 감지되었습니다. - - - Network error while downloading '%1': %2. - "%1" 다운로드 중에 네트워크 오류 발생: %2. - - - Unknown network error while downloading "%1". - %1 is a sentence describing the error - "%1" 다운로드 중에 네트워크 오류 발생: - - - Network transfers canceled. - 네트워크 전송이 취소되었습니다. - - - Pause and resume not supported by network transfers. - 네트워크 전송은 일시 중지하거나 다시 시작할 수 없습니다. - - - Invalid source URL "%1": %2 - %2 is a sentence describing the error - 유효하지 않은 소스 URL "%1": %2 - - - - AuthenticationRequiredException - - %1 at %2 - %2의 %1 - - - Proxy requires authentication. - 프록시는 인증이 필요합니다. - - - - QInstaller::ElevatedExecuteOperation - - Cannot start detached: "%1" - 분리된 항목을 시작할 수 없음: "%1" - - - Cannot start: "%1": %2 - 시작할 수 없음: "%1": %2 - - - Program crashed: "%1" - 프로그램이 충돌함: "%1" - - - Execution failed (Unexpected exit code: %1): "%2" - 실행하지 못함(예상치 못한 종료 코드: %1): "%2" - - - - UpdateOperation - - Cannot write to registry path %1. - 레지스트리 경로(%1)를 쓸 수 없습니다. - - - Registry path %1 is not writable. - 레지스트리 경로(%1)를 쓸 수 없습니다. - - - exactly %1 - 정확히 %1 - - - at least %1 - 최소 %1 - - - not more than %1 - %1 이하 - - - %1 or %2 - %1 또는 %2 - - - %1 to %2 - %1~%2 - - - Invalid arguments in %1: %n arguments given, %2 arguments expected. - - %1에 유효하지 않은 인수: %n개의 인수 입력, %2개의 인수 필요. - - - - Invalid arguments in %1: %n arguments given, %2 arguments expected in the form: %3. - - %1에 유효하지 않은 인수: %n개의 인수 입력, 양식에 %2개의 인수 필요: %3. - - - - Renaming file "%1" to "%2" failed: %3 - 파일 명을 "%1"에서 "%2"(으)로 변경하늦 중에 오류 발생: %3 - - - - QInstaller::ExtractArchiveOperation - - Extracting "%1" - "%1" 추출 중 - - - - QInstaller::FakeStopProcessForUpdateOperation - - Cannot get package manager core. - 패키지 관리자 코어를 가져올 수 없습니다. - - - This process should be stopped before continuing: %1 - 계속하기 전에 중지해야 하는 프로세스: %1 - - - These processes should be stopped before continuing: %1 - 계속하기 전에 중지해야 하는 프로세스: %1 - - - - QInstaller::GlobalSettingsOperation - - Settings are not writable. - 설정을 쓸 수 없습니다. - - - Failed to write settings. - 설정을 쓰지 못했습니다. - - - - InstallerCalculator - - Components added as automatic dependencies: - 구성요소가 자동 종속성으로 추가됨: - - - Components added as dependency for "%1": - 구성요소가 "%1"용 자동 종속성으로 추가됨: - - - Components that have resolved dependencies: - 종속성을 해결한 구성요소: - - - Selected components without dependencies: - 종속성 없이 선택된 구성요소: - - - Recursion detected, component "%1" already added with reason: "%2" - 회귀가 감지됨. 구성요소("%1")가 다음 사유로 이미 추가됨: "%2" - - - Cannot find missing dependency "%1" for "%2". - "%2"에 대한 누락된 종속성 "%1"을(를) 찾을 수 없습니다. - - - - QInstaller::InstallIconsOperation - - <source path> [vendor prefix] - <소스 경로> [벤더 접두사] - - - Invalid Argument: source directory must not be empty. - 유효하지 않은 인수: 소스 디렉토리를 입력해야 합니다. - - - Cannot backup file "%1": %2 - "%1" 파일을 백업할 수 없음: %2 - - - Failed to overwrite "%1": %2 - "%1"을(를) 덮어쓸 수 없음: %2 - - - Failed to copy file "%1": %2 - "%1" 파일을 복사할 수 없음: %2 - - - Cannot create directory "%1": %2 - "%1" 디렉토리를 생성할 수 없음: %2 - - - - Lib7z - - Internal code: %1 - 내부 코드: %1 - - - Not enough memory - 메모리 부족 - - - Error: %1 - 오류: %1 - - - Cannot retrieve property %1 for item %2. - 항목 %2에 대한 %1 속성을 검색할 수 없습니다. - - - Property %1 for item %2 not of type VT_FILETIME but %3. - 항목 %2에 대한 %1 속성은 VT_FILETIME 유형이 아니라 %3입니다. - - - Cannot convert UTC file time to system time. - UTC 파일 시간을 시스템 시간으로 변환할 수 없습니다. - - - Cannot load codecs. - 코덱을 로드할 수 없습니다. - - - Cannot open archive "%1". - "%1" 아카이브를 열 수 없습니다. - - - Cannot retrieve number of items in archive. - 아카이브의 항목 개수를 검색할 수 없습니다. - - - Cannot retrieve path of archive item "%1". - 아카이브 항목 "%1"의 경로를 검색할 수 없습니다. - - - Unknown exception caught (%1). - 알 수 없는 예외가 발생했습니다(%1). - - - Cannot create temporary file: %1 - 임시 파일을 생성할 수 없음: %1 - - - Unsupported archive type. - 아카이브 유형이 지원되지 않습니다. - - - Cannot create archive "%1" - "%1" 아카이브를 생성할 수 없음 - - - Cannot create archive "%1": %2 - "%1" 아카이브를 생성할 수 없음: %2 - - - Cannot remove old archive "%1": %2 - 이전 아카이브 "%1" 제거 불가: %2 - - - Cannot rename temporary archive "%1" to "%2": %3 - 임시 아카이브 "%1"의 이름을 "%2"(으)로 변경할 수 없음: %3 - - - Unknown exception caught (%1) - 알 수 없는 예외 발생(%1) - - - - DirectoryGuard - - Path "%1" exists but is not a directory. - "%1" 경로가 존재하지만 디렉토리가 아닙니다. - - - Cannot create directory "%1". - "1%" 디렉토리를 생성할 수 없습니다. - - - - ExtractCallbackImpl - - Cannot retrieve path of archive item %1. - 아카이브 항목 "%1"의 경로를 검색할 수 없습니다. - - - Cannot remove already existing symlink %1. - 이미 존재하는 symlink %1을(를) 제거할 수 없습니다. - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Cannot create symlink at "%1". Another one is already existing. - "%1"에서 symlink를 생성할 수 없습니다. 다른 symlink가 이미 있습니다. - - - Cannot read symlink target from file "%1". - 파일 "%1"에서 symlink 대상을 읽을 수 없습니다. - - - Cannot create symlink at %1: %2 - "%1"에서 symlink를 생성할 수 없음: %2 - - - - QInstaller::LicenseOperation - - No license files found to copy. - 복사할 라이선스 파일을 찾을 수 없습니다. - - - Needed installer object in %1 operation is empty. - "%1" 작업에 필요한 설치 개체가 비어 있습니다. - - - Can not write license file "%1". - "%1" 라이선스 파일을 쓸 수 없습니다. - - - No license files found to delete. - 삭제할 라이선스 파일을 찾을 수 없습니다. - - - - QInstaller::LineReplaceOperation - - Invalid argument in %1: Empty search argument is not supported. - %1에 유효하지 않은 인수: 빈 인수는 지원되지 않습니다. - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - - QInstaller::MetadataJob - - Missing package manager core engine. - 패키지 관리자 코어 엔진이 누락되었습니다. - - - Preparing meta information download... - 메타 정보 다운로드 준비 중... - - - Unpacking compressed repositories. This may take a while... - 압축된 리포지토리의 압축을 해제합니다. 약간의 시간이 걸릴 수 있습니다... - - - Metadata download canceled. - 메타데이터 다운로드가 취소되었습니다. - - - Unknown exception during extracting. - 추출 중에 알 수 없는 예외가 발생했습니다. - - - Missing proxy credentials. - 프록시 자격 증명이 누락되었습니다. - - - Authentication failed. - 인증하지 못했습니다. - - - Unknown exception during download. - 다운로드 중에 알 수 없는 예외가 발생했습니다. - - - Failure to fetch repositories. - 리포지토리를 가져올 수 없습니다. - - - Extracting meta information... - 메타 정보 추출 중... - - - Checksum mismatch detected for "%1". - "%1"에 대한 체크섬 불일치가 감지되었습니다. - - - Retrieving meta information from remote repository... %1/%2 - 원격 리포지토리에서 메타 정보 검색 중... %1/%2 - - - Retrieving meta information from remote repository... - 원격 리포지토리에서 메타 정보 검색 중... - - - Error while extracting archive "%1": %2 - 아카이브 "%1" 추출 중에 오류 발생: %2 - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - - QInstaller::FileTaskObserver - - %1 of %2 - %1/%2 - - - %1 received. - %1을(를) 받았습니다. - - - (%1/sec) - (%1/초) - - - %n day(s), - - %n일, - - - - %n hour(s), - - %n시간, - - - - %n minute(s) - - %n분 - - - - %n second(s) - - %n초 - - - - - %1%2%3%4 remaining. - - 남은 시간: %1%2%3%4 - - - - unknown time remaining. - - 남은 시간: 알 수 없음 - - - - QInstaller::PackageManagerCore - - Error writing Maintenance Tool - 유지 보수 도구를 쓰는 중에 오류 발생 - - - -Downloading packages... - -패키지 다운로드 중... - - - Installation canceled by user. - 사용자가 설치를 취소했습니다. - - - All downloads finished. - 모든 다운로드가 완료되었습니다. - - - Canceling the Installer - 설치 관리자 취소 중 - - - Authentication Error - 인증 오류 - - - Some components could not be removed completely because administrative rights could not be acquired: %1. - 관리 권한을 획득하지 못해 일부 구성요소를 완전히 제거하지 못했습니다. %1. - - - Unknown error. - 알 수 없는 오류입니다. - - - Some components could not be removed completely because an unknown error happened. - 알 수 없는 오류가 발생해 일부 구성요소를 완전히 제거하지 못했습니다. - - - User input is required but the output device is not associated with a terminal. - 사용자 입력이 필요하지만 출력 기기가 터미널과 연결되지 않았습니다. - - - Error - 오류 - - - The directory you selected already exists and contains an installation. Choose a different target for installation. - 선택한 디렉토리가 이미 존재하며 설치 항목도 포함되어 있습니다. 설치하려면 다른 디렉토리를 선택하십시오. - - - Warning - 경고 - - - You have selected an existing, non-empty directory for installation. -Note that it will be completely wiped on uninstallation of this application. -It is not advisable to install into this directory as installation might fail. -Do you want to continue? - 파일이 이미 있는 기존 디렉토리를 설치 디렉토리로 선택하셨습니다. -이 애플리케이션을 제거할 때 디렉토리가 완전히 삭제되오니 유의하십시오. -설치가 실패할 수 있으므로 이 디렉토리에 설치하는 것은 권장하지 않습니다. -계속하시겠습니까? - - - You have selected an existing file or symlink, please choose a different target for installation. - 기존 파일 또는 symlink를 선택하셨습니다. 설치할 다른 대상을 선택하십시오. - - - The installation path cannot be empty, please specify a valid directory. - 설치 경로가 비어 있으면 안 됩니다. 유효한 디렉토리를 선택하십시오. - - - The installation path cannot be relative, please specify an absolute path. - 상대적인 경로를 설치 경로로 지정하면 안 됩니다. 절대 경로를 지정하십시오. - - - The path or installation directory contains non ASCII characters. This is currently not supported! Please choose a different path or installation directory. - 설치 경로 또는 디렉토리에 ASCII 문자가 아닌 문자가 포함되어 있습니다. 현재 이는 지원되지 않습니다! 다른 설치 경로나 디렉토리를 선택하십시오. - - - As the install directory is completely deleted, installing in %1 is forbidden. - 설치 경로가 완전히 삭제되었으므로 %1에 설치할 수 없습니다. - - - The path you have entered is too long, please make sure to specify a valid path. - 입력하신 경로가 너무 깁니다. 유효한 경로를 지정하십시오. - - - The path you have entered is not valid, please make sure to specify a valid target. - 입력하신 경로가 유효하지 않습니다. 유효한 경로를 지정하십시오. - - - The path you have entered is not valid, please make sure to specify a valid drive. - 입력하신 경로가 유효하지 않습니다. 유효한 드라이브를 지정하십시오. - - - The installation path must not end with '.', please specify a valid directory. - 설치 경로가 '.' 문자로 끝나면 안 됩니다. 유효한 디렉토리를 지정하십시오. - - - The installation path must not contain "%1", please specify a valid directory. - 설치 경로에 "%1" 문자가 포함되면 안 됩니다. 유효한 디렉토리를 지정하십시오. - - - Application not running in Package Manager mode. - 패키지 관리자 모드에서 애플리케이션이 실행되지 않고 있습니다. - - - No installed packages found. - 설치된 패키지를 찾을 수 없습니다. - - - Cannot register component! Component with identifier %1 already exists. - 구성요소를 등록할 수 없습니다! %1 식별자가 있는 구성 요소가 이미 존재합니다. - - - Application running in Uninstaller mode. - 애플리케이션이 설치 제거 관리자 모드로 실행 중입니다. - - - There is an important update available, please run the updater first. - 중요한 업데이트가 있습니다. 업데이터를 먼저 실행하십시오. - - - Cannot resolve all dependencies. - 모든 종속성을 해결할 수 없습니다. - - - Components about to be removed. - 구성요소가 제거됩니다. - - - Cannot install %1. Component not found. - - %1을(를) 설치할 수 없습니다. 구성요소를 찾을 수 없습니다. - - - - Cannot install component %1. Component is installed only as automatic dependency to %2. - - %1 구성요소를 설치할 수 없습니다. %2에 대한 자동 종속성으로만 구성요소가 설치됩니다. - - - - Cannot install component %1. Component is not checkable, meaning you have to select one of the subcomponents. - - %1 구성요소를 설치할 수 없습니다. 구성요소를 확인할 수 없어 하위 구성요소 중 하나를 설치해야 합니다. - - - - Component %1 already installed - - %1 구성요소가 이미 설치됨 - - - - Cannot install %1. Component is a descendant of a virtual component %2. - - %1을(를) 설치할 수 없습니다. 구성요소가 가상 구성요소 %2의 하위 항목입니다. - - - - Cannot install %1. Component is virtual. - - %1을(를) 설치할 수 없습니다. 가상 구성요소입니다. - - - - Running processes found. - 실행 중인 프로세스를 찾았습니다. - - - Cannot elevate access rights while running from command line. Please restart the application as administrator. - 명령줄에서 실행할 때 접근 원한을 상승시킬 수 없습니다. 관리자로서 애플리케이션을 재시작하십시오. - - - Error while elevating access rights. - 접근 권한을 상승시키는 중에 오류가 발생했습니다. - - - Not enough disk space to store temporary files and the installation. %1 are available, while the minimum required is %2. - 디스크 공간이 부족하여 임시 파일과 설치 파일을 저장할 수 없습니다. %1은(는) 사용 가능하지만 최소한 %2이(가) 필요합니다. - - - Not enough disk space to store all selected components! %1 are available, while the minimum required is %2. - 디스크 공간이 부족하여 선택한 구성요소를 모두 저장할 수 없습니다! %1은(는) 사용 가능하지만 최소한 %2이(가) 필요합니다. - - - Not enough disk space to store temporary files! %1 are available, while the minimum required is %2. - 디스크 공간이 부족하여 임시 파일을 저장할 수 없습니다! %1은(는) 사용 가능하지만 최소한 %2이(가) 필요합니다. - - - The volume you selected for installation seems to have sufficient space for installation, but there will be less than 1% of the volume's space available afterwards. - 설치를 위해 선택한 볼륨은 설치 공간이 충분한 것으로 보이지만, 설치 후에 남은 공간이 볼륨 공간의 %1 미만일 것으로 예상됩니다. - - - The volume you selected for installation seems to have sufficient space for installation, but there will be less than 100 MB available afterwards. - 설치를 위해 선택한 볼륨은 설치 공간이 충분한 것으로 보이지만, 설치 후에 남은 공간이 100MB 미만일 것으로 예상됩니다. - - - The estimated installer size %1 would exceed the supported executable size limit of %2. The application may not be able to run. - 예상 설치 크기(%1)가 지원되는 실행 가능한 크기 제한(%2)을 초과할 것으로 예상됩니다. 애플리케이션 실행이 불가능할 수 있습니다. - - - Installation will use %1 of disk space. - 설치 관리자가 디스크 공간의 %1을(를) 사용할 것입니다. - - - Invalid - 유효하지 않음 - - - - QInstaller::PackageManagerCorePrivate - - Unresolved dependencies - 해결되지 않은 종속성 - - - Error - 오류 - - - Access error - 접근 오류 - - - Format error - 형식 오류 - - - Cannot write installer configuration to %1: %2 - 설치 관리자 구성을 %1에 쓸 수 없음: %2 - - - Stop Processes - 프로세스 중지 - - - These processes should be stopped to continue: - -%1 - 계속하기 전에 중지해야 하는 프로세스: - -%1 - - - Installation canceled by user - 사용자가 설치를 취소함 - - - Retry count exceeded - 재시도 횟수 초과 - - - Writing maintenance tool. - 유지 보수 도구를 쓰는 중입니다. - - - Failed to seek in file %1: %2 - %1 파일에서 찾지 못함: %2 - - - Maintenance tool is not a bundle - 유지 보수 도구가 번들이 아님 - - - Cannot remove data file "%1": %2 - "1%" 데이터 파일을 제거할 수 없음 %2 - - - Cannot write maintenance tool data to %1: %2 - %1에 유지 보수 도구 데이터를 쓸 수 없음: %2 - - - Cannot write maintenance tool to "%1": %2 - %1에 유지 보수 도구를 쓸 수 없음: %2 - - - Cannot remove temporary data file "%1": %2 - 임시 디렉토리 "%1" 제거가 불가능합니다. %2 - - - Cannot write maintenance tool binary data to %1: %2 - %1에 유지 보수 도구 바이너리 데이터를 쓸 수 없음: %2 - - - Writing offline base binary. - 오프라인 기본 바이너리를 쓰는 중입니다. - - - Cannot remove file "%1": %2 - "1%" 파일을 제거할 수 없음: %2 - - - Cannot create directory "%1". - "1%" 디렉토리를 생성할 수 없습니다. - - - Cannot write offline binary to "%1": %2 - "%1"에 오프라인 바이너리를 쓸 수 없습니다. %2 - - - Cannot remove temporary file "%1": %2 - 임시 디렉토리 "%1" 제거가 불가능합니다. %2 - - - Variable 'TargetDir' not set. - 변수 'TargetDir'이 설정되지 않았습니다. - - - Preparing the installation... - 설치 준비 중... - - - It is not possible to install from network location - 네트워크 위치에서 설치할 수 없습니다. - - - Creating local repository - 로컬 리포지토리 생성 중 - - - Creating Maintenance Tool - 유지 보수 도구 생성 중 - - - -Installation finished! - -설치가 완료되었습니다! - - - -Installation aborted! - -설치가 중단되었습니다! - - - It is not possible to run that operation from a network location - 네트워크 위치에서 이 작업을 실행할 수 없습니다. - - - Removing deselected components... - 선택 취소한 구성요소 제거 중... - - - -Update finished! - -업데이트가 완료되었습니다! - - - -Update aborted! - -업데이트가 중단되었습니다! - - - Removal completed successfully. - 성공적으로 설치 제거했습니다. - - - Removal aborted. - 설치 제거가 중단되었습니다. - - - Cannot create target directory for installer. - 설치 관리자에 사용할 대상 디렉토리를 생성할 수 없습니다. - - - Preparing offline generation... - 오프라인 생성 준비 중... - - - Preparing installer configuration... - 설치 관리자 구성 요소 준비 중... - - - Creating the installer... - 설치 관리자 생성 중... - - - Failed to create offline installer. %1 - 오프라인 설치 관리자를 생성할 수 없습니다. %1 - - - Cannot remove temporary directory "%1". - 임시 디렉토리 "%1" 제거에 실패했습니다. - - - Offline generation completed successfully. - 성공적으로 오프라인 생성을 완료했습니다. - - - Offline generation aborted! - 오프라인 생성이 중단되었습니다! - - - -Installing component %1 - -구성요소 %1 설치 중 - - - Installer Error - 설치 관리자 오류 - - - Error during installation process (%1): -%2 - 설치 프로세스 중 오류 발생(%1): -%2 - - - Done - 완료 - - - Cannot prepare removal - 설치 제거를 준비할 수 없음 - - - Cannot start removal - 설치 제거를 시작할 수 없음 - - - Error during removal process: -%1 - 설치 해제 프로세스 중에 오류 발생: -%1 - - - Unknown error - 알 수 없는 오류 - - - Cannot retrieve remote tree %1. - 원격 트리 %1을(를) 검색할 수 없습니다. - - - Failure to read packages from %1. - %1에서 패키지를 읽을 수 없습니다. - - - Cannot retrieve meta information: %1 - 메타 정보를 검색할 수 없음: %1 - - - Cannot add temporary update source information. - 임시 업데이트 소스 정보를 추가할 수 없습니다. - - - Cannot find any update source information. - 어떠한 업데이트 소스 정보도 추가할 수 없습니다. - - - Dependency cycle between components "%1" and "%2" detected. - 구성요소 "%1" 및 "%2" 간의 종속성 사이클이 감지되었습니다. - - - - QInstaller::PackageManagerGui - - %1 Setup - %1 설정 - - - Maintain %1 - %1 유지 - - - Do you want to cancel the installation process? - 설치 프로세스를 취소하시겠습니까? - - - Do you want to cancel the removal process? - 설치 제거 프로세스를 취소하시겠습니까? - - - Do you want to quit the installer application? - 설치 관리자 애플리케이션을 종료하시겠습니까? - - - Do you want to quit the uninstaller application? - 설치 제거 관리자 애플리케이션을 종료하시겠습니까? - - - Do you want to quit the maintenance application? - 유지 보수 애플리케이션을 종료하시겠습니까? - - - %1 Question - %1 질문 - - - Settings - 설정 - - - Specify proxy settings and configure repositories for add-on components. - 애드온 구성요소를 위한 프록시 설정과 구성 리포지토리를 지정하십시오. - - - Error - 오류 - - - It is not possible to install from network location. -Please copy the installer to a local drive - 네트워크 위치에서 설치할 수 없습니다. -설치 관리자를 로컬 드라이브에 복사하십시오. - - - - QInstaller::IntroductionPage - - Setup - %1 - 설정 - %1 - - - Welcome to the %1 Setup Wizard. - %1 설정 마법사에 오신 것을 환영합니다. - - - &Add or remove components - 구성요소 추가 또는 제거(&A) - - - &Update components - 구성요소 업데이트(&U) - - - &Remove all components - 모든 구성요소 제거(&R) - - - Retrieving information from remote installation sources... - 원격 설치 소스에서 정보 검색 중... - - - At least one valid and enabled repository required for this action to succeed. - 이 작업을 성공적으로 수행하려면 최소 1개의 유효하고 활성화된 리포지토리가 필요합니다. - - - No updates available. - 사용 가능한 업데이트가 없습니다. - - - Only local package management available. - 로컬 패키지 관리만 가능합니다. - - - &Quit - 종료(&Q) - - - There is an important update available. Please select '%1' first - - - - - QInstaller::LicenseAgreementPage - - License Agreement - 라이선스 계약 - - - Alt+A - Agree license - Alt+A - - - Please read the following license agreement. You must accept the terms contained in this agreement before continuing with the installation. - 다음 라이선스 계약을 읽으십시오. 설치를 계속하려면 이 계약 조항에 동의하셔야 합니다. - - - I accept the license. - 라이선스 조항에 동의합니다. - - - Please read the following license agreements. You must accept the terms contained in these agreements before continuing with the installation. - 다음 라이선스 계약을 읽으십시오. 설치를 계속하려면 이 계약 조항에 동의하셔야 합니다. - - - I accept the licenses. - 이 라이선스에 동의합니다. - - - - QInstaller::TargetDirectoryPage - - Installation Folder - 설치 폴더 - - - Please specify the directory where %1 will be installed. - %1이(가) 설치될 디렉토리를 지정하십시오. - - - Alt+R - Browse file system to choose a file - Alt+R - - - B&rowse... - 탐색(&R)... - - - Browse file system to choose the installation directory. - 파일 시스템을 탐색하여 설치 디렉토리를 선택합니다. - - - Select Installation Folder - 설치 폴더 선택 - - - - QInstaller::StartMenuDirectoryPage - - Start Menu shortcuts - 메뉴 바로 가기 시작 - - - Select the Start Menu in which you would like to create the program's shortcuts. You can also enter a name to create a new directory. - 프로그램 바로 가기를 생성하려는 시작 메뉴를 선택합니다. 이름을 직접 입력하여 새 디렉토리를 생성할 수도 있습니다. - - - - QInstaller::ReadyForInstallationPage - - U&ninstall - 설치 제거(&N) - - - Ready to Uninstall - 설치 제거 준비 완료 - - - Setup is now ready to begin removing %1 from your computer.<br><font color="red">The program directory %2 will be deleted completely</font>, including all content in that directory! - 컴퓨터에 %1 제거를 시작할 준비가 되었습니다.<br><font color="red">%2 프로그램 디렉토리는 모두 삭제되며</font>, 해당 디렉토리에 포함된 모든 콘텐츠도 삭제됩니다! - - - U&pdate - 업데이트(&P) - - - Ready to Update Packages - 패키지 업데이트 준비 완료 - - - Setup is now ready to begin updating your installation. - 이제 설치 업데이트를 시작할 준비가 되었습니다. - - - &Install - 설치(&I) - - - Ready to Install - 설치 준비 완료 - - - Setup is now ready to begin installing %1 on your computer. - 컴퓨터에 %1 설치를 시작할 준비가 되었습니다. - - - Ready to Update - 업데이트 준비 완료 - - - - QInstaller::PerformInstallationPage - - U&ninstall - 설치 제거(&N) - - - Uninstalling %1 - %1 설치 제거 - - - &Update - 업데이트(&U) - - - Updating components of %1 - %1의 구성요소 업데이트 중 - - - &Install - 설치(&I) - - - Installing %1 - %1 설치 중 - - - Installing - 설치 중 - - - Updating - 업데이트 중 - - - Uninstalling - 설치 제거 중 - - - - QInstaller::FinishedPage - - Completing the %1 Wizard - %1 마법사 완료 중 - - - Finished - 완료됨 - - - Click %1 to exit the %2 Wizard. - %2 마법사를 종료하려면 %1을(를) 클릭하십시오. - - - Restart - 다시 시작 - - - Run %1 now. - 지금 %1을(를) 실행하십시오. - - - The %1 Wizard failed. - %1 마법사가 실패했습니다. - - - - QInstaller::RestartPage - - Completing the %1 Setup Wizard - %1 설정 마법사 완료 중 - - - - QInstaller::PerformInstallationForm - - &Show Details - 상세 정보 표시(&S) - - - &Hide Details - 상세 정보 숨기기(&H) - - - - QInstaller::RegisterFileTypeOperation - - Registering file types is only supported on Windows. - 등록하려는 파일 유형이 Windows에서만 지원됩니다. - - - Register File Type: Invalid arguments - 등록 파일 유형: 유효하지 않은 인수 - - - - RemoteClient - - Cannot get authorization. - 권한 부여를 받을 수 없습니다. - - - Cannot get authorization that is needed for continuing the installation. - Either abort the installation or use the fallback solution by running - -%1 - -as a user with the appropriate rights and then clicking OK. - 설치를 계속하기 위해 필요한 권한 부여를 받을 수 없습니다. - 설치를 중단하거나 임시 해결책으로 적절한 권한이 있는 사용자로 - -%1을(를) - -실행한 다음 ‘확인’을 클릭하십시오. - - - Cannot get authorization that is needed for continuing the installation. - -Please start the setup program as a user with the appropriate rights, -or accept the elevation of access rights if being asked. - 설치를 계속하기 위해 필요한 권한 부여를 받을 수 없습니다. - -적절한 권한이 있는 사용자로서 설정 프로그램을 시작하십시오. -또는 요청 시 접근 권한 상승을 수락하십시오. - - - - QInstaller::RemoteObject - - Cannot read all data after sending command: %1. Bytes expected: %2, Bytes received: %3. Error: %4 - 다음 명령 전송 후 모든 데이터를 읽을 수 없음: %1. 예상된 바이트: %2, 수신한 바이트: %3. 오류: %4 - - - - QInstaller::ReplaceOperation - - Current search argument calling "%1" with empty search argument is not supported. - 빈 검색 인수로 "%1"을(를) 호출하는 검색 인수는 지원되지 않습니다. - - - Current mode argument calling "%1" with arguments "%2" is not supported. Please use string or regex. - "%2" 인수로 "%1"을(를) 호출하는 현재 모드는 지원되지 않습니다. 문자열이나 regex를 사용하십시오. - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - - QInstaller::QFileDialogProxy - - User input is required but the output device is not associated with a terminal. - 사용자 입력이 필요하지만 출력 기기가 터미널과 연결되지 않았습니다. - - - - QInstaller::ScriptEngine - - Cannot open script file at %1: %2 - %1에서 스크립트 파일을 열 수 없음: %2 - - - Exception while loading the component script "%1": %2 - 구성요소 스크립트 "%1" 로드 중에 예외 발생: %2 - - - Unknown error. - 알 수 없는 오류입니다. - - - on line number: - 온라인 번호: - - - - QInstaller::SelfRestartOperation - - Installer object needed in operation %1 is empty. - "%1" 작업에 필요한 설치 개체가 비어 있습니다. - - - Self Restart: Only valid within updater or package manager mode. - 자가 재시작: 업데이터 또는 패키지 관리자 모드에서만 사용 가능합니다. - - - Self Restart: Invalid arguments - 자가 재시작: 유효하지 않은 인수 - - - - Settings - - Cannot open settings file %1 for reading: %2 - 설정 파일 "%1"을(를) 읽기 위해 열 수 없음: %2 - - - Select Categories - 범주 선택 - - - - QInstaller::SettingsOperation - - Missing argument(s) "%1" calling %2 with arguments "%3". - "%3" 인수가 있는 %2를 호출하는 "%1" 인수가 누락되었습니다. - - - Current method argument calling "%1" with arguments "%2" is not supported. Please use set, remove, add_array_value, or remove_array_value. - "%2" 인수로 "%1"을(를) 호출하는 현재 모드는 지원되지 않습니다. set, remove, add_array_value or remove_array_value를 사용하십시오. - - - - QInstaller::SimpleMoveFileOperation - - None of the arguments can be empty: source "%1", target "%2". - 인수는 모두 입력해야 합니다: 소스 "%1", 대상 "%2". - - - Cannot move file from "%1" to "%2", because the target path exists and is not removable. - 대상 파일이 존재하며 제거할 수 없으므로 "%1"에서 "%2"에 파일을 옮길 수 없습니다. - - - Cannot move file "%1" to "%2": %3 - 파일 "%1"을(를) "%2"(으)로 옮길 수 없습니다. %3 - - - Moving file "%1" to "%2". - 파일 "%1"을(를) "%2"으(로) 옮깁니다. - - - - QInstaller::TestRepository - - Missing package manager core engine. - 패키지 관리자 코어 엔진이 누락되었습니다. - - - Empty repository URL. - 리포지토리 URL이 비었습니다. - - - Download canceled. - 다운로드가 취소되었습니다. - - - Timeout while testing repository "%1". - "%1" 리포지토리를 테스트하는 중에 시간이 초과되었습니다. - - - Cannot parse Updates.xml: %1 - Updates.xml을 파싱할 수 없습니다. %1 - - - Cannot open Updates.xml for reading: %1 - Updates.xml 파일을 읽기 위해 열 수 없습니다. %1 - - - Authentication failed. - 인증하지 못했습니다. - - - Unknown error while testing repository "%1". - "%1" 리포지토리를 테스트하는 중에 알 수 없는 오류가 발생했습니다. - - - - KDUpdater::FileDownloader - - Download finished. - 다운로드가 완료되었습니다. - - - Cryptographic hashes do not match. - 암호화된 해시가 일치하지 않습니다. - - - Download canceled. - 다운로드가 취소되었습니다. - - - %1 of %2 - %1/%2 - - - %1 downloaded. - %1 다운로드가 완료되었습니다. - - - (%1/sec) - (%1/초) - - - %n day(s), - - %n일, - - - - %n hour(s), - - %n시간, - - - - %n minute(s) - - %n분 - - - - %n second(s) - - %n초 - - - - - %1%2%3%4 remaining. - - 남은 시간: %1%2%3%4 - - - - unknown time remaining. - - 남은 시간: 알 수 없음 - - - - KDUpdater::LocalFileDownloader - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Writing to file "%1" failed: %2 - "%1" 파일에 쓰기 실패: %2 - - - - KDUpdater::ResourceFileDownloader - - Cannot read resource file "%1": %2 - "%1" 리소스 파일을 읽을 수 없음: %2 - - - - KDUpdater::HttpDownloader - - Cannot download %1. Writing to file "%2" failed: %3 - %1을(를) 다운로드할 수 없습니다. "%2" 파일에 쓰기 실패: %3 - - - Cannot download %1. Cannot create file "%2": %3 - %1을(를) 다운로드할 수 없습니다. "%2" 파일을 생성할 수 없음: %3 - - - %1 at %2 - %2의 %1 - - - Authentication request canceled. - 인증 요청이 취소되었습니다. - - - Secure Connection Failed - 보안 연결 실패 - - - There was an error during connection to: %1. - 다음에 연결 중 오류 발생: %1. - - - This could be a problem with the server's configuration, or it could be someone trying to impersonate the server. - 서버 구성에 문제가 있거나 타인이 서버를 가장하는 것으로 보입니다. - - - If you have connected to this server successfully in the past or trust this server, the error may be temporary and you can try again. - 이전에 이 서버에 성공적으로 연결한 적이 있거나 이 서버를 신뢰하는 경우에는 일시적인 오류일 수 있으며, 다시 시도할 수 있습니다. - - - Try again - 다시 시도하기 - - - - Job - - Canceled - 취소됨 - - - - LocalPackageHub - - %1 contains invalid content: %2 - %1에 올바르지 않은 콘텐츠가 포함됨: %2 - - - The file %1 does not exist. - %1 파일이 없습니다. - - - Cannot open %1. - %1을(를) 열 수 없습니다. - - - Parse error in %1 at %2, %3: %4 - %2의 %1에서 파싱 오류 발생, %3: %4 - - - Root element %1 unexpected, should be 'Packages'. - %1 루트 요소는 예상하지 못했습니다. 'Packages'여야 합니다. - - - - LockFile - - Cannot create lock file "%1": %2 - "%1" 파일 잠금을 생성할 수 없음: %2 - - - Cannot write PID to lock file "%1": %2 - "%1" 파일을 잠그기 위해 PID를 쓸 수 없음: %2 - - - Cannot obtain the lock for file "%1": %2 - "%1" 파일을 위한 잠금을 수행할 수 없음: %2 - - - Cannot release the lock for file "%1": %2 - "%1" 파일을 위한 잠금을 해제할 수 없음: %2 - - - - KDUpdater::Task - - %1 started - %1 시작됨 - - - %1 cannot be stopped - %1을(를) 중지할 수 없음 - - - Cannot stop task %1 - %1 작업을 중지할 수 없음 - - - %1 cannot be paused - %1을(를) 일시 중지할 수 없음 - - - Cannot pause task %1 - %1 작업을 일시 중지할 수 없음 - - - Cannot resume task %1 - %1 작업을 다시 시작할 수 없음 - - - %1 done - %1 완료 - - - - KDUpdater::UpdateFinder - - Cannot access the package information of this application. - 이 애플리케이션의 패키지 정보에 액세스할 수 없습니다. - - - No package sources set for this application. - 이 애플리케이션에 설정된 패키지 소스가 없습니다. - - - %n update(s) found. - - %n개의 업데이트를 찾았습니다. - - - - Downloading Updates.xml from update sources. - 업데이트 소스에서 Updates.xml을 다운로드합니다. - - - Cannot download package source %1 from "%2". - "%2"에서 패키지 소스(%1)를 다운로드할 수 없습니다. - - - Updates.xml file(s) downloaded from update sources. - 업데이트 소스에서 Updates.xml 파일이 다운로드되었습니다. - - - Computing applicable updates. - 적용 가능한 업데이트를 계산합니다. - - - Application updates computed. - 적용 가능한 업데이트를 계산했습니다. - - - - KDUpdater::CopyOperation - - Cannot backup file "%1". - "%1" 파일을 백업할 수 없습니다. - - - Cannot copy a non-existent file: %1 - 존재하지 않는 파일을 복사할 수 없음: %1 - - - Cannot remove file "%1": %2 - "1%" 파일을 제거할 수 없음: %2 - - - Cannot copy file "%1" to "%2": %3 - "%1"에서 "%2"에 파일을 복사할 수 없음: %3 - - - Cannot delete file "%1": %2 - "%1" 파일을 삭제할 수 없음: %2 - - - Cannot restore backup file into "%1": %2 - "%1"의 백업 파일을 복원할 수 없음: %2 - - - - KDUpdater::MoveOperation - - Cannot backup file "%1". - "%1" 파일을 백업할 수 없습니다. - - - Cannot remove file "%1": %2 - "1%" 파일을 제거할 수 없음: %2 - - - Cannot copy file "%1" to "%2": %3 - "%1"에서 "%2"에 파일을 복사할 수 없음: %3 - - - Cannot remove file "%1". - "1%" 파일을 제거할 수 없음: - - - Cannot restore backup file for "%1": %2 - "%1"의 백업 파일을 복원할 수 없음: %2 - - - - KDUpdater::DeleteOperation - - Cannot create backup of file "%1": %2 - "%1" 파일의 백업을 생성할 수 없음: %2 - - - Cannot restore backup file for "%1": %2 - "%1"의 백업 파일을 복원할 수 없음: %2 - - - - KDUpdater::MkdirOperation - - Cannot create directory "%1": %2 - "%1" 디렉토리를 생성할 수 없음: %2 - - - Unknown error. - 알 수 없는 오류입니다. - - - Cannot remove directory "%1": %2 - "1%" 디렉토리를 제거할 수 없음: %2 - - - - KDUpdater::RmdirOperation - - Cannot remove directory "%1": %2 - "1%" 디렉토리를 제거할 수 없음: %2 - - - The directory does not exist. - 이 디렉토리가 존재하지 않습니다. - - - Cannot recreate directory "%1": %2 - "1%" 디렉토리를 다시 생성할 수 없습니다. %2 - - - - KDUpdater::AppendFileOperation - - Cannot backup file "%1": %2 - "%1" 파일을 백업할 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Cannot find backup file for "%1". - "%1"의 백업 파일을 찾을 수 없음: - - - Cannot restore backup file for "%1". - "%1"의 백업 파일을 복원할 수 없음: - - - Cannot restore backup file for "%1": %2 - "%1"의 백업 파일을 복원할 수 없음: %2 - - - - KDUpdater::PrependFileOperation - - Cannot backup file "%1": %2 - "%1" 파일을 백업할 수 없음: %2 - - - Cannot open file "%1" for reading: %2 - "%1" 파일을 읽기 위해 열 수 없음: %2 - - - Cannot open file "%1" for writing: %2 - "%1" 파일을 쓰기 위해 열 수 없음: %2 - - - Cannot find backup file for "%1". - "%1"의 백업 파일을 찾을 수 없음: - - - Cannot restore backup file for "%1". - "%1"의 백업 파일을 복원할 수 없음: - - - Cannot restore backup file for "%1": %2 - "%1"의 백업 파일을 복원할 수 없음: %2 - - - - KDUpdater::UpdatesInfoData - - Updates.xml contains invalid content: %1 - Updates.xml 파일에 올바르지 않은 콘텐츠가 포함됨: %1 - - - Cannot read "%1" - "%1"을(를) 읽을 수 없음 - - - Parse error in %1 at %2, %3: %4 - %2의 %1에서 파싱 오류 발생, %3: %4 - - - Root element %1 unexpected, should be "Updates". - %1 루트 요소는 예상하지 못했습니다. 'Updates'여야 합니다. - - - ApplicationName element is missing. - ApplicationName 요소가 누락되었습니다. - - - ApplicationVersion element is missing. - ApplicationVersion 요소가 누락되었습니다. - - - PackageUpdate element without Name - PackageUpdate 요소에 Name이 없음 - - - PackageUpdate element without Version - PackageUpdate 요소에 Version이 없음 - - - PackageUpdate element without ReleaseDate - PackageUpdate 요소에 ReleaseDate가 없음 - - - - InstallerBase - - Unable to start installer - 설치 관리자를 시작할 수 없음 - - - - QInstaller::ExtractArchiveOperation::Worker - - Could not create handler object for archive "%1": "%2". - - - - Cannot open archive "%1" for reading: %2 - "%1" 아카이브를 읽기 위해 열 수 없음: %2 - - - Error while reading contents of archive "%1": %2 - - - - Cannot prepare for file "%1" - - - - Extract for archive "%1" canceled. - - - - Error while extracting archive "%1": %2 - 아카이브 "%1" 추출 중에 오류 발생: %2 - - - -- cgit v1.2.3