From b11f689b79d9a238f99b8bb111e9412c74bfbdae Mon Sep 17 00:00:00 2001 From: Kai Koehne Date: Fri, 19 Dec 2014 16:12:33 +0100 Subject: Remove country from most translations If we provide an en_us translation only this won't be picked up by users having configured 'en', or 'en_uk'. This also mirrors the naming of the qt translations. The exception is zh_CN though, because the difference between simplified and traditional characters is big. I'm not sure whether taiwanese people would rather prefer traditional characters or english. For Qt we have both zh_CN and zh_TW, maybe we will get a zh_TW in the future too... Change-Id: I73490337aef8f54da14b6feca3a035e1e405d65b Reviewed-by: Niels Weber --- src/sdk/translations/en_us.ts | 3307 ----------------------------------------- 1 file changed, 3307 deletions(-) delete mode 100644 src/sdk/translations/en_us.ts (limited to 'src/sdk/translations/en_us.ts') diff --git a/src/sdk/translations/en_us.ts b/src/sdk/translations/en_us.ts deleted file mode 100644 index a5d636a2c..000000000 --- a/src/sdk/translations/en_us.ts +++ /dev/null @@ -1,3307 +0,0 @@ - - - - - Component - - - Could not open archive %1: %2 - - - - - Dialog - - - Http authentication required - - - - - You need to supply a Username and Password to access this site. - - - - - Username: - - - - - Password: - - - - - %1 at %2 - - - - - IntroductionPageImpl - - - Package manager - - - - - Update components - - - - - Remove all components - - - - - Retrieving information from remote installation sources... - - - - - At least one valid and enabled repository required for this action to succeed. - - - - - No updates available. - - - - - Only local package management available. - - - - - Quit - - - - - KDJob - - - Canceled - - - - - KDSaveFile - - - Append mode not supported. - - - - - Read-only access not supported. - - - - - Could not backup existing file %1: %2 - - - - - - - TODO - - - - - KDUpdater::AppendFileOperation - - - Cannot backup file %1: %2 - - - - - Invalid arguments: %1 arguments given, 2 expected. - - - - - Could not open file %1 for writing: %2 - - - - - Cannot find backup file for %1. - - - - - Could not restore backup file for %1. - - - - - Could not restore backup file for %1: %2 - - - - - KDUpdater::CopyOperation - - - Could not backup file %1. - - - - - Invalid arguments: %1 arguments given, 2 expected. - - - - - Could not remove destination file %1: %2 - - - - - Could not copy %1 to %2: %3 - - - - - Could not delete file %1: %2 - - - - - Could not restore backup file into %1: %2 - - - - - KDUpdater::DeleteOperation - - - Cannot create backup of %1: %2 - - - - - Invalid arguments: %1 arguments given, 1 expected. - - - - - Cannot restore backup file for %1: %2 - - - - - KDUpdater::FileDownloader - - - Download canceled. - - - - - Cryptographic hashes do not match. - - - - - Download finished. - - - - - of - - - - - downloaded. - - - - - /sec - - - - - day - - - - - days - - - - - hour - - - - - hours - - - - - minute - - - - - minutes - - - - - second - - - - - seconds - - - - - - - - - - - remaining. - - - - - - unknown time remaining. - - - - - KDUpdater::HttpDownloader - - - Cannot download %1: Writing to file '%2' failed: %3 - - - - - Cannot download %1: Could not create %2: %3 - - - - - %1 at %2 - - - - - Authentication request canceled. - - - - - KDUpdater::LocalFileDownloader - - - Cannot open source file '%1' for reading. - - - - - Cannot open destination file '%1' for writing. - - - - - Writing to %1 failed: %2 - - - - - KDUpdater::MkdirOperation - - - Invalid arguments: %1 arguments given, 1 expected. - - - - - Could not create folder %1: Unknown error. - - - - - Cannot remove directory %1: %2 - - - - - KDUpdater::MoveOperation - - - Could not backup file %1. - - - - - Invalid arguments: %1 arguments given, 2 expected. - - - - - Could not remove destination file %1: %2 - - - - - Could not copy %1 to %2: %3 - - - - - Cannot copy %1 to %2: %3 - - - - - Cannot remove file %1. - - - - - Cannot restore backup file for %1: %2 - - - - - KDUpdater::PackagesInfo - - - %1 contains invalid content: %2 - - - - - The file %1 does not exist. - - - - - Could not open %1. - - - - - Parse error in %1 at %2, %3: %4 - - - - - Root element %1 unexpected, should be 'Packages'. - - - - - KDUpdater::PrependFileOperation - - - Cannot backup file %1: %2 - - - - - Invalid arguments: %1 arguments given, 2 expected. - - - - - Could not open file %1 for reading: %2 - - - - - Could not open file %1 for writing: %2 - - - - - Cannot find backup file for %1. - - - - - Cannot restore backup file for %1. - - - - - Cannot restore backup file for %1: %2 - - - - - KDUpdater::ResourceFileDownloader - - - Could not read resource file "%1". Reason: - - - - - KDUpdater::RmdirOperation - - - Invalid arguments: %1 arguments given, 1 expected. - - - - - Could not remove folder %1: The folder does not exist. - - - - - Could not remove folder %1: %2 - - - - - Cannot recreate directory %1: %2 - - - - - KDUpdater::Task - - - %1 started - - - - - %1 cannot be stopped - - - - - Cannot stop task %1 - - - - - %1 cannot be paused - - - - - Cannot pause task %1 - - - - - Cannot resume task %1 - - - - - %1 done - - - - - KDUpdater::UpdateFinder - - - Could not access the package information of this application. - - - - - Could not access the update sources information of this application. - - - - - %1 updates found. - - - - - - Downloading Updates.xml from update sources. - - - - - Could not download updates from %1 ('%2') - - - - - Updates.xml file(s) downloaded from update sources. - - - - - Computing applicable updates. - - - - - Application updates computed. - - - - - KDUpdater::UpdateSourcesInfo - - - %1 contains invalid content: %2 - - - - - Could not read "%1" - - - - - XML Parse error in %1 at %2, %3: %4 - - - - - Root element %1 unexpected, should be "UpdateSources" - - - - - - Could not save changes to "%1": %2 - - - - - KDUpdater::UpdatesInfoData - - - Could not read "%1" - - - - - Parse error in %1 at %2, %3: %4 - - - - - Updates.xml contains invalid content: %1 - - - - - Root element %1 unexpected, should be "Updates". - - - - - ApplicationName element is missing. - - - - - ApplicationVersion element is missing. - - - - - PackageUpdate element without Name - - - - - PackageUpdate element without Version - - - - - PackageUpdate element without ReleaseDate - - - - - Lib7z::ExtractItemJob - - - Could not list archive: QIODevice not set or already destroyed. - - - - - Lib7z::ListArchiveJob - - - Could not list archive: QIODevice already destroyed. - - - - - QInstaller::AddQtCreatorArrayValueOperation - - - exactly 4 - - - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - (group, arrayname, key, value) - - - - - - Needed installer object in %1 operation is empty. - - - - - There is no value set for %1 on the installer object. - - - - - QInstaller::Component - - - Could not open the requested translation file '%1'. - - - - - Could not open the requested UI file '%1'. Error: %2 - - - - - Could not load the requested UI file '%1'. Error: %2 - - - - - An error has occurred while reading the UI file. - - - - - Could not open the requested license file '%1'. Error: %2 - - - - - Error - - - - - Error: Operation %1 does not exist - - - - - Can't resolve isAutoDependOn in %1 - - - - - Can't resolve isDefault in %1 - - - - - Update Info: - - - - - QInstaller::ComponentModel - - - Component Name - - - - - Installed Version - - - - - New Version - - - - - Size - - - - - QInstaller::ComponentSelectionPage - - - Alt+A - select default components - - - - - Def&ault - - - - - Alt+R - reset to already installed components - - - - - &Reset - - - - - Alt+S - select all components - - - - - &Select All - - - - - Alt+D - deselect all components - - - - - &Deselect All - - - - - This component will occupy approximately %1 on your hard disk drive. - - - - - Select Components - - - - - Please select the components you want to update. - - - - - Please select the components you want to install. - - - - - Please select the components you want to uninstall. - - - - - Select the components to install. Deselect installed components to uninstall them. - - - - - QInstaller::ConsumeOutputOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - at least 2 - - - - - Needed installer object in %1 operation is empty. - - - - - Can not save the output of %1 to an empty installer key value. - - - - - File '%1' does not exist or is not an executable binary. - - - - - Running '%1' resulted in a crash. - - - - - QInstaller::CopyDirectoryOperation - - - 2 or 3 - - - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - (<source> <target> [forceOverwrite]) - - - - - Invalid argument in %0: Third argument needs to be forceOverwrite, if specified - - - - - Invalid arguments in %0: Directories are invalid: %1 %2 - - - - - Could not create %0 - - - - - Failed to overwrite %1 - - - - - Could not copy %0 to %1, error was: %3 - - - - - Could not remove %0 - - - - - QInstaller::CreateDesktopEntryOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - Failed to overwrite %1 - - - - - Could not write Desktop Entry at %1 - - - - - QInstaller::CreateLinkOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - QInstaller::CreateLocalRepositoryOperation - - - Could not set file permissions %1! - - - - - Could not move file %1 to %2. Error: %3 - - - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - Installer needs to be an offline version: %1. - - - - - Could not open file: %1 - - - - - Could not read: %1. Error: %2 - - - - - Could not open file: %1. Error: %2 - - - - - Could not create target dir: %1. - - - - - Unknown exception caught: %1. - - - - - Removing file: %0 - - - - - Could not remove %0. - - - - - - Cannot remove directory %1: %2 - - - - - QInstaller::CreateShortcutOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - 2 or 3 - - - - - (optional: 'workingDirectory=...') - - - - - - Could not create folder %1: %2. - - - - - Could not create link %1: %2 - - - - - QInstaller::DownloadArchivesJob - - - - Canceled - - - - - Downloading hash signature failed. - - - - - - Download Error - - - - - Hash verification while downloading failed. This is a temporary error, please retry. - - - - - Could not verify Hash - - - - - Could not download archive: %1 : %2 - - - - - Could not fetch archives: %1 -Error while loading %2 - - - - - Downloading archive hash for component: %1 - - - - - Downloading archive for component: %1 - - - - - Scheme not supported: %1 (%2) - - - - - Could not find component for: %1. - - - - - QInstaller::ElevatedExecuteOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - at least 1 - - - - - Execution failed: Could not start detached: "%1" - - - - - Execution failed: Could not start: "%1"(%2) - - - - - Execution failed(Crash): "%1" - - - - - Execution failed(Unexpected exit code: %1): "%2" - - - - - QInstaller::EnvironmentVariableOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - 2 or 3 - - - - - QInstaller::ExtractArchiveOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - QInstaller::ExtractArchiveOperation::Runnable - - - Could not open %1 for reading: %2. - - - - - Error while extracting '%1': %2 - - - - - Unknown exception caught while extracting %1. - - - - - QInstaller::FinishedPage - - - Completing the %1 Wizard - - - - - Click Done to exit the %1 Wizard. - - - - - Click Finish to exit the %1 Wizard. - - - - - Restart - - - - - Run %1 now. - - - - - The %1 Wizard failed. - - - - - QInstaller::GetRepositoryMetaInfoJob - - - Empty repository URL. - - - - - Retrieving component meta information... - - - - - Invalid repository URL: %1 - - - - - URL scheme not supported: %1 (%2) - - - - - Could not move Updates.xml to target location. Error: %1 - - - - - Could not open Updates.xml for reading. Error: %1 - - - - - Could not fetch a valid version of Updates.xml from repository: %1. Error: %2 - - - - - - - Download Error - - - - - Parsing component meta information... - - - - - - Repository updates received. - - - - - Finished updating component meta information. - - - - - Could not fetch Updates.xml from repository: %1. Error: %2 - - - - - Retrieving component information from remote repository... - - - - - Could not open meta info archive: %1. Error: %2 - - - - - The hash of one component does not match the expected one. - - - - - Bad hash. - - - - - Could not download meta information for component: %1. Error: %2 - - - - - QInstaller::GetRepositoryMetaInfoJob::ZipRunnable - - - Error while extracting '%1': %2 - - - - - Unknown exception caught while extracting %1. - - - - - Could not open %1 for reading. Error: %2 - - - - - QInstaller::GlobalSettingsOperation - - - Settings are not writable - - - - - Failed to write settings - - - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - 3 or 4 - - - - - QInstaller::InstallIconsOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - 1 or 2 - - - - - (Sourcepath, [Vendorprefix]) - - - - - QInstaller::IntroductionPage - - - Setup - %1 - - - - - Welcome to the %1 Setup Wizard. - - - - - QInstaller::LicenseAgreementPage - - - License Agreement - - - - - Alt+A - agree license - - - - - Please read the following license agreement. You must accept the terms contained in this agreement before continuing with the installation. - - - - - I accept the license. - - - - - I do not accept the license. - - - - - Please read the following license agreements. You must accept the terms contained in these agreements before continuing with the installation. - - - - - I accept the licenses. - - - - - I do not accept the licenses. - - - - - Alt+D - do not agree license - - - - - QInstaller::LicenseOperation - - - No license files found to copy. - - - - - Needed installer object in %1 operation is empty. - - - - - Can not write license file: %1. - - - - - No license files found to delete. - - - - - QInstaller::LineReplaceOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 3 - - - - - QInstaller::MacReplaceInstallNamesOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - at least 3 - - - - - One of the given arguments is empty. Argument1=%1; Argument2=%2, Argument3=%3 - - - - - Can't invoke otool. Is Xcode installed? - - - - - Can't start process %0. - - - - - QInstaller::PackageManagerCore - - - Error writing Uninstaller - - - - - -Downloading packages... - - - - - Installation canceled by user - - - - - All downloads finished. - - - - - Error - - - - - Cancelling the Installer - - - - - Authentication Error - - - - - Some components could not be removed completely because admin rights could not be acquired: %1. - - - - - Unknown error. - - - - - Some components could not be removed completely because an unknown error happened. - - - - - Application not running in Package Manager mode! - - - - - No installed packages found. - - - - - Application running in Uninstaller mode! - - - - - invalid - - - - - QInstaller::PackageManagerCorePrivate - - - - - - - Error - - - - - Component(s) added as automatic dependencies - - - - - Added as dependency for %1. - - - - - Component(s) that have resolved Dependencies - - - - - Selected Component(s) without Dependencies - - - - - Access error - - - - - Format error - - - - - Could not write installer configuration to %1: %2 - - - - - Stop Processes - - - - - These processes should be stopped to continue: - -%1 - - - - - - - Installation canceled by user - - - - - Writing uninstaller. - - - - - Uninstaller is not a bundle - - - - - Could not write uninstaller data to %1: %2 - - - - - Could not write uninstaller to %1: %2 - - - - - Found a binary data file, but we are the installer and we should read the binary resource from our very own binary! - - - - - Could not write uninstaller binary data to %1: %2 - - - - - ProductName should be set - - - - - Variable 'TargetDir' not set. - - - - - - Preparing the installation... - - - - - It is not possible to install from network location - - - - - - Creating local repository - - - - - - Creating Uninstaller - - - - - -Installation finished! - - - - - -Installation aborted! - - - - - It is not possible to run that operation from a network location - - - - - Removing deselected components... - - - - - -Update finished! - - - - - -Update aborted! - - - - - -Uninstallation completed successfully! - - - - - -Uninstallation aborted! - - - - - -Installing component %1 - - - - - - Installer Error - - - - - Error during installation process (%1): -%2 - - - - - Cannot prepare uninstall - - - - - Cannot start uninstall - - - - - Error during uninstallation process: -%1 - - - - - Unknown error - - - - - Could not retrieve remote tree: %1. - - - - - Failure to read packages from: %1. - - - - - Could not retrieve meta information: %1 - - - - - - Could not add temporary update source information. - - - - - Could not find any update source information. - - - - - QInstaller::PackageManagerGui - - - %1 Setup - - - - - Maintain %1 - - - - - - Question - - - - - Do you want to abort the %1 process? - - - - - uninstallation - - - - - installation - - - - - installer - - - - - uninstaller - - - - - maintenance - - - - - Do you want to quit the %1 application? - - - - - Settings - - - - - Error - - - - - It is not possible to install from network location. -Please copy the installer to a local drive - - - - - QInstaller::PerformInstallationForm - - - - - &Show Details - - - - - &Hide Details - - - - - QInstaller::PerformInstallationPage - - - U&ninstall - - - - - Uninstalling %1 - - - - - &Update - - - - - Updating components of %1 - - - - - &Install - - - - - Installing %1 - - - - - QInstaller::QtPatchOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 3 - - - - - Needed installer object in "%1" operation is empty. - - - - - First argument should be 'linux', 'mac' or 'windows'. No other type is supported at this time. - - - - - Could not find the needed QmakeOutputInstallerKey(%1) value on the installer object. The ConsumeOutput operation on the valid qmake needs to be called first. - - - - - QMake from the current Qt version -(%1)is not existing. Please file a bugreport with this dialog at https://bugreports.qt-project.org. - - - - - The output of -%1 -query -is not parseable. Please file a bugreport with this dialog https://bugreports.qt-project.org. -output: "%2" - - - - - Qt patch error: new Qt dir(%1) -needs to be less than 255 characters. - - - - - - Qt patch error: Can not open %1.(%2) - - - - - The installer was not able to get the unpatched path from -%1.(maybe it is broken or removed) -It tried to patch the Qt binaries, but all other files in Qt are unpatched. -This could result in a broken Qt version. -Sometimes it helps to restart the installer with a switched off antivirus software. - - - - - QInstaller::ReadyForInstallationPage - - - - &Show Details - - - - - U&ninstall - - - - - Ready to Uninstall - - - - - Setup is now ready to begin removing %1 from your computer.<br><font color="red">The program directory %2 will be deleted completely</font>, including all content in that directory! - - - - - U&pdate - - - - - Ready to Update Packages - - - - - Setup is now ready to begin updating your installation. - - - - - &Install - - - - - Ready to Install - - - - - Setup is now ready to begin installing %1 on your computer. - - - - - Not enough disk space to store temporary files and the installation! Available space: %1, at least required %2. - - - - - Not enough disk space to store all selected components! Available space: %1, at least required: %2. - - - - - Not enough disk space to store temporary files! Available space: %1, at least required: %2. - - - - - The volume you selected for installation seems to have sufficient space for installation, but there will be less than 1% of the volume's space available afterwards. %1 - - - - - The volume you selected for installation seems to have sufficient space for installation, but there will be less than 100 MB available afterwards. %1 - - - - - Can not resolve all dependencies! - - - - - Components about to be removed. - - - - - &Hide Details - - - - - QInstaller::RegisterDefaultDebuggerOperation - - - Invalid arguments in %0: %1 arguments given, 2 expected. - - - - - - Needed installer object in "%1" operation is empty. - - - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - There is no value set for %1 on the installer object. - - - - - Can't read from tool chains xml file(%1) correctly. - - - - - QInstaller::RegisterFileTypeOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - 2 to 5 - - - - - Register File Type: Invalid arguments - - - - - QInstaller::RegisterQtInCreatorQNXOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - at least 5 - - - - - - Needed installer object in "%1" operation is empty. - - - - - There is no value set for %1 on the installer object. - - - - - Invalid arguments in %0: %1 arguments given, minimum 4 expected. - - - - - QInstaller::RegisterToolChainOperation - - - at least 4 - - - - - Needed installer object in '%1' operation is empty. - - - - - There is no value set for '%1' on the installer object. - - - - - Invalid arguments in %0: %1 arguments given, minimum 4 expected. - - - - - Needed installer object in "%1" operation is empty. - - - - - - Can't read from tool chains xml file(%1) correctly. - - - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - - Some arguments are not right in %1 operation. - - - - - QInstaller::ReplaceOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 3 - - - - - QInstaller::RestartPage - - - Completing the %1 Setup Wizard - - - - - QInstaller::ScriptEngine - - - Could not open the requested script file at %1: %2. - - - - - Exception while loading the component script: '%1' - - - - - Could not load the component script inside a script context: '%1' - - - - - Fatal error while evaluating a script. - - - - - QInstaller::SelfRestartOperation - - - Installer object needed in '%1' operation is empty. - - - - - Self Restart: Only valid within updater or packagemanager mode. - - - - - Self Restart: Invalid arguments - - - - - QInstaller::SetDemosPathOnQtOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - The output of -'%1 -query' -is not parseable. Please file a bugreport with this dialog at https://bugreports.qt-project.org. -output: %2 - - - - - Qt patch error: new Qt demo path '%1' -needs to be less than 255 characters. - - - - - QInstaller::SetExamplesPathOnQtOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - The output of -'%1 -query' -is not parseable. Please file a bugreport with this dialog at https://bugreports.qt-project.org. -output: %2 - - - - - Qt patch error: new Qt example path '%1' -needs to be less than 255 characters. - - - - - QInstaller::SetImportsPathOnQtCoreOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - Qt patch error: new Qt imports path '%1' -needs to be less than 255 characters. - - - - - QInstaller::SetPathOnQtCoreOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 3 - - - - - The second type/value needs to be one of: %1 - - - - - QInstaller::SetPluginPathOnQtCoreOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - Qt patch error: new Qt plugin path '%1' -needs to be less than 255 characters. - - - - - QInstaller::SetQtCreatorValueOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 4 - - - - - (rootInstallPath, group, key, value) - - - - - Needed installer object in "%1" operation is empty. - - - - - There is no value set for '%1' on the installer object. - - - - - Needed installer object in '%1' operation is empty. - - - - - QInstaller::SimpleMoveFileOperation - - - Invalid arguments in %0: %1 arguments given, %2 expected%3. - - - - - exactly 2 - - - - - None of the arguments can be empty: source '%1', target '%2'. - - - - - Can not move source '%1' to target '%2', because target exists and is not removable. - - - - - Can not move source '%1' to target '%2': %3 - - - - - - Move '%1' to '%2'. - - - - - QInstaller::StartMenuDirectoryPage - - - Start Menu shortcuts - - - - - Select the Start Menu in which you would like to create the program's shortcuts. You can also enter a name to create a new folder. - - - - - QInstaller::TargetDirectoryPage - - - Installation Folder - - - - - Please specify the folder where %1 will be installed. - - - - - Alt+R - browse file system to choose a file - - - - - B&rowse... - - - - - - Error - - - - - The install directory cannot be empty, please specify a valid folder. - - - - - As the install directory is completely deleted on uninstall, installing in %1 is forbidden. - - - - - Warning - - - - - You have selected an existing, non-empty folder for installation. Note that it will be completely wiped on uninstallation of this application. It is not advisable to install into this folder as installation might fail. Do you want to continue? - - - - - Select Installation Folder - - - - - QInstallerCreator::Archive - - - - Could not create %1: %2 - - - - - Could not open archive file %1 for reading. - - - - - Could not create archive from %1: Not a file. - - - - - Error while packing directory at %1 - - - - - QObject - - - Searched whole file, no marker found - - - - - Could not seek to %1 in file %2: %3 - - - - - No marker found, stopped after %1. - - - - - No marker found, unknown exception caught. - - - - - Cannot create zipped file for path %1: %2 - - - - - Could not seek to in-binary resource. (offset: %1, length: %2) - - - - - Could not register in-binary resource. - - - - - - Could not open binary %1: %2 - - - - - Could not seek to binary layout section. - - - - - Could not seek to metadata index. - - - - - Could not seek to operation list. - - - - - Could not seek to component index information. - - - - - Could not seek to component index. - - - - - Cannot open file %1 for reading: %2 - - - - - - Cannot open file %1 for writing: %2 - - - - - Write failed after %1 bytes: %2 - - - - - Read failed after %1 bytes: %2 - - - - - - Could not remove file %1: %2 - - - - - Could not remove folder %1: %2 - - - - - - Could not create folder %1 - - - - - Could not copy file from %1 to %2: %3 - - - - - Could not move file from %1 to %2: %3 - - - - - - Could not create folder %1: %2 - - - - - Could not open temporary file: %1 - - - - - Could not open temporary file for template %1: %2 - - - - - Could not create temporary folder for template %1: %2 - - - - - Could not create lock file %1: %2 - - - - - Could not write PID to lock file %1: %2 - - - - - Could not lock lock file %1: %2 - - - - - Could not unlock lock file %1: %2 - - - - - Path exists but is not a folder: %1 - - - - - Could not create folder: %1 - - - - - Could not create temporary file - - - - - Could not retrieve property %1 for item %2 - - - - - Property %1 for item %2 not of type VT_FILETIME but %3 - - - - - Could not convert file time to local time - - - - - Could not convert local file time to system time - - - - - No device set for output stream - - - - - - - Could not load codecs - - - - - - - Could not retrieve default format - - - - - Could not open archive - - - - - No CArc found - - - - - - Could not retrieve number of items in archive - - - - - - - - Could not retrieve path of archive item %1 - - - - - - - - - - Unknown exception caught (%1) - - - - - - Failed - - - - - Could not remove already existing symlink. %1 - - - - - Could not open file: %1 (%2) - - - - - Could not create symlink at '%1'. Another one is already existing. - - - - - Could not read symlink target from file '%1'. - - - - - Could not create symlink at %1. %2 - - - - - internal code: %1 - - - - - not enough memory - - - - - Error: %1 - - - - - Could not create archive %1. %2 - - - - - Error while extracting '%1': %2 - - - - - CArc index %1 out of bounds [0, %2] - - - - - Item index %1 out of bounds [0, %2] - - - - - Could not create output file for writing: %1 - - - - - - Authorization required - - - - - - Enter your password to authorize for sudo: - - - - - Error acquiring admin rights - - - - - Could not backup file %1 - - - - - Could not delete file %1 - - - - - Could not restore backup file into %1 - - - - - - Failed to overwrite %1: %2 - - - - - Registry path %1 is not writable - - - - - Could not write to registry path %1 - - - - - Invalid Argument: source folder must not be empty. - - - - - Could not backup file %1: %2 - - - - - Failed to copy file %1: %2 - - - - - Could not create folder at %1: %2 - - - - - Invalid arguments: %1 arguments given, %2 to %3 expected. - - - - - Invalid arguments: %1 arguments given, %2 expected. - - - - - Error while elevating access rights. - - - - - Failed to seek in file %1: %2 - - - - - Failed to open %1 for reading - - - - - Failed to open %1 for writing - - - - - Failed to seek in file %1. Reason: %2. - - - - - Could not create link from %1 to %2. - - - - - Could not remove link from %1 to %2. - - - - - Authorization Error - - - - - Couldn't get authorization. - - - - - Couldn't get authorization that is needed for continuing the installation. -Either abort the installation or use the fallback solution by running -%1 -as root and then clicking ok. - - - - - - Registering file types is only supported on Windows. - - - - - Failed to open '%1' for reading. - - - - - Failed to open '%1' for writing. - - - - - Number of arguments does not match: one is required - - - - - Could not get package manager core. - - - - - This process should be stopped before continuing: %1 - - - - - These processes should be stopped before continuing: %1 - - - - - Settings - - - Could not open settings file %1 for reading: %2 - - - - - SettingsDialog - - - Settings - - - - - Network - - - - - No proxy - - - - - System proxy settings - - - - - Manual proxy configuration - - - - - HTTP proxy: - - - - - - Port: - - - - - HTTP proxy requires authentication - - - - - - Username: - - - - - - Password: - - - - - FTP proxy: - - - - - FTP proxy requires authentication - - - - - Repositories - - - - - Add Username and Password for authentication if needed. - - - - - Use temporary repositories only - - - - - Add - - - - - Remove - - - - - Test - - - - - - Show Passwords - - - - - Check this to use repository during fetch. - - - - - Add the username to authenticate on the server. - - - - - Add the password to authenticate on the server. - - - - - The servers URL that contains a valid repository. - - - - - There was an error testing this repository. - - - - - Do you want to disable the tested repository? - - - - - Hide Passwords - - - - - Use - - - - - Username - - - - - Password - - - - - Repository - - - - - Default repositories - - - - - Temporary repositories - - - - - User defined repositories - - - - - TargetDirectoryPageImpl - - - The installation path cannot be empty, please specify a valid folder. - - - - - The installation path cannot be relative, please specify an absolute path. - - - - - Warning - - - - - Error - - - - - The path or installation directory contains non ASCII characters. This is currently not supported! Please choose a different path or installation directory. - - - - - The path you have entered is too long, please make sure to specify a valid path. - - - - - The path you have entered is not valid, please make sure to specify a valid drive. - - - - - The installation path must not contain %1, please specify a valid folder. - - - - - As the install directory is completely deleted installing in %1 is forbidden. - - - - - The folder you selected exists already and contains an installation. -Do you want to overwrite it? - - - - - You have selected an existing, non-empty folder for installation. -Note that it will be completely wiped on uninstallation of this application. -It is not advisable to install into this folder as installation might fail. -Do you want to continue? - - - - - You have selected an existing file or symlink, please choose a different target for installation. - - - - - TestRepository - - - Empty repository URL. - - - - - URL scheme not supported: %1 (%2). - - - - - Could not parse Updates.xml! Error: %1. - - - - - Updates.xml could not be opened for reading! - - - - - Updates.xml could not be found on server! - - - - -- cgit v1.2.3