/****************************************************************************
**
** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the Qt Installer Framework.
**
** $QT_BEGIN_LICENSE:FDL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia.  For licensing terms and
** conditions see http://qt.digia.com/licensing.  For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file.  Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: http://www.gnu.org/copyleft/fdl.html.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
    \contentspage {index.html}{Qt Installer Framework}
    \previouspage ifw-getting-started.html
    \page ifw-use-cases.html
    \nextpage ifw-use-cases-install.html

    \title End User Workflows

    The end user experience is similar for both offline and online installers.
    The installers consist of a package manager and an updater that enable end
    users to add, update, and remove components.

    You can support the following end user workflows:

    \list

        \o  \l{Initial Installation}

        \o  \l{Adding Components}

        \o  \l{Removing Components}

        \o  \l{Updating Components}

        \o  \l{Specifying Settings}

    \endlist
*/

/*!
    \contentspage index.html
    \previouspage ifw-use-cases.html
    \page ifw-use-cases-install.html
    \nextpage ifw-use-cases-add.html

    \title Initial Installation

    The following image illustrates the default workflow for installing
    applications:

    \image ifw-user-flow-installing.png "Installation workflow"

    This section uses the \e {Your Application Installer} example run on Windows
    to illustrate the default workflow for end users. The installers have the
    native look and feel on each supported desktop platform, and therefore they
    look and feel different when run on Linux and Mac OS X.

    The example files are stored in the \c{examples\tutorial} directory
    in the Qt Installer Framework repository. You can use the \c binarycreator
    tool to create \e {Your Application Installer}.

    \section1 Starting Installer

    When end users start the installer, the introduction page opens:

    \image ifw-introduction-page.png "Introduction page"

    You specify the name of the installer and the product to install in the
    \c config.xml configuration file.

    When end users select \gui Next, the target directory selection page opens.

    \section1 Selecting Target Directory

    End users must specify the target directory for the installation. You can
    specify a default value in the \c config.xml configuration file.

    \image ifw-target-directory-page.png "Target directory selection page"

    When end users select \gui Next, the component selection page opens.

    If the directory already contains files, a warning page opens:

    \image ifw-warning-existing-installation.png "Warning page"

    \section1 Selecting Components

    The component selection page lists the components available for installation
    and a short description of each component. End users select the components
    to install. They can select \gui {Select All} to select all components,
    \gui {Deselect All} to deselect them, or \gui Default to revert to the
    default selection.

    \image ifw-select-components.png "Component selection page"

    You add the installable components to the \c data directory in the package
    directory. You specify information about the components in the
    \c package.xml file in the \c meta directory.

    You can use a boolean operator or a script to specify whether a component is
    selected by default.

    When end users select \gui Next, the license check page opens.

    \section1 Accepting License Agreements

    On the license check page, end users must accept the terms of the license
    agreement for the installation to continue.

    \image ifw-license-check-page.png "License check page"

    The license check page is displayed, if you specify a license file in the
    \c package.xml file and copy the file to the \c meta directory.

    \section1 Selecting Windows Program Group

    On Windows, the Start menu directory selection page enables end users to
    select the program group for the product in the Windows \gui Start menu.

    \image ifw-win-program-group.png "Start menu directory selection page"

    You specify a default value for the program group in the \c config.xml
    configuration file.

    When end users select \gui Next, the ready for installation page opens.

    \section1 Installing Components

    The ready for installation page informs end users that the installation can
    begin when users select \gui Install.

    \image ifw-ready-for-installation.png "Ready for installation page"

    During the installation, the perform installation page displays information
    about how the installation is progressing. End users can select
    \gui {Show Details} to view more information.

    \image ifw-perform-installation.png "Perform installation page"

    When the installation is complete, the installation finished page opens.

    \image ifw-installation-finished.png "Installation finished page"

    To this page, you can add the option to start the installed product upon
    closing the installer. You specify the product to start and the text to
    display in the \c config.xml configuration file.
*/

/*!
    \contentspage index.html
    \previouspage ifw-use-cases-install.html
    \page ifw-use-cases-add.html
    \nextpage ifw-use-cases-remove.html

    \title Adding Components

    The following image illustrates the default workflow for installing
    additional components:

    \image ifw-user-flow-adding.png "Add components workflow"

    This section uses the Qt SDK Maintenance Tool run on Windows to illustrate
    how end users add components after the initial installation.

    \section1 Starting Package Manager

    When end users start the Maintenance Tool, the introduction page opens:

    \image ifw-add-components-introduction.png "Introduction page"

    When end users select \gui {Package manager}, and then \gui Next, the
    component selection page opens.

    \section1 Selecting Additional Components

    The component selection page lists the components available for installation
    and a short description of each component. Installed components are
    displayed selected in the list. End users select additional components to
    install. They can select \gui Reset to display the currently installed
    components again.

    \image ifw-add-components-selection.png "Component selection page"

    When end users select \gui Next, the ready to update page opens.

    \section1 Installing Selected Components

    The ready to update page informs end users that the components are installed
    when users select \gui Update.

    \image ifw-ready-to-update.png "Ready to update page"

    The update page displays information about how installation is progressing.
    End users can select \gui {Show Details} to view more information.

    \image ifw-perform-update.png "Update page"

    When the installation is complete, the update finished page opens.

    \image ifw-update-finished.png "Update finished page"

*/

/*!
    \contentspage index.html
    \previouspage ifw-use-cases-add.html
    \page ifw-use-cases-remove.html
    \nextpage ifw-use-cases-update.html

    \title Removing Components

    The following image illustrates the default workflow for removing either
    all or some installed components:

    \image ifw-user-flow-removing.png "Remove components workflow"

    This section uses the Qt SDK Maintenance Tool run on Windows to illustrate
    how end users remove components.

    \section1 Removing All Components

    When end users start the Maintenance Tool, the introduction page opens:

    \image ifw-add-components-introduction.png "Introduction page"

    End users can select \gui {Remove all components}, and then \gui Next, to
    remove all installed components.

    The ready to uninstall page informs end users that the uninstallation can
    begin when users select \gui Uninstall.

    \image ifw-ready-to-uninstall.png "Ready to uninstall page"

    \section1 Removing Selected Components

    End users can select \gui {Package manager}, and then \gui Next, to select
    components to remove on the component selection page:

    \image ifw-add-components-selection.png "Component selection page"

    When end users deselect the components to remove, and then select \gui Next,
    the ready to update page opens. It informs end users that the components are
    removed when users select \gui Update.

    \image ifw-ready-to-update.png "Ready to update page"

    The update page displays information about how removal is progressing.
    End users can select \gui {Show Details} to view more information.

    \image ifw-removing-components.png "Update page"

    When the removal is complete, the update finished page opens.

    \image ifw-update-finished.png "Update finished page"
*/

/*!
    \contentspage index.html
    \previouspage ifw-use-cases-remove.html
    \page ifw-use-cases-update.html
    \nextpage ifw-use-cases-settings.html

    \title Updating Components

    The following image illustrates the default workflow for installing
    additional components:

    \image ifw-user-flow-updating.png "Updating workflow"

    This section uses the Qt SDK Maintenance Tool run on Windows to illustrate
    how end users remove components.

    \section1 Starting Updater

    When end users start the Maintenance Tool, the introduction page opens:

    \image ifw-updating-introduction.png "Introduction page"

    When end users select \gui {Update components}, and then \gui Next, the
    component selection page opens.

    \section1 Selecting Components to Update

    The updater displays a list of available updates that end users can select
    from.

    \image ifw-updating-components.png "Component selection page"

    When end users select \gui Next, the ready to update page opens.

    \section1 Updating Selected Components

    The ready to update page informs end users that the components are updated
    when users select \gui Update.

    \image ifw-ready-to-update.png "Ready to update page"

    The update page displays information about how updating is progressing.
    End users can select \gui {Show Details} to view more information.

    \image ifw-perform-update.png "Update page"

    When update is complete, the update finished page opens.

    \image ifw-update-finished.png "Update finished page"
*/

/*!
    \contentspage index.html
    \previouspage ifw-use-cases-update.html
    \page ifw-use-cases-settings.html
    \nextpage ifw-tutorial.html

    \title Specifying Settings

    Settings pages enable end users to specify proxy settings or install add-on
    components. End users select \gui Settings on the introduction page to
    specify the settings.

    \section1 Specifying Proxy Settings

    By default, the installer does not use any proxy settings. End users can
    select to use the system proxy settings or specify the proxy settings
    manually.

    \image ifw-settings-network.png "Network tab on Settings page"

    \section1 Installing Add-on Components

    To install add-on components, end users select the \gui Repositories tab.

    \image ifw-settings-repositories.png "Repositories tab on Settings page"

    If the web server requires authentication, end users can add their username
    and password. To display passwords, end users select \gui {Show Passwords}.

    To add their own repositories to the installer, end users can select
    \gui Add and specify the URL that points to the repository.

    Temporary repositories can be used only once, for initial installation.
    After the installation, only default and user-defined repositories will be
    available.

*/