AuthenticationRequiredException %1 at %2 %1，%2 Proxy requires authentication. 代理需要进行身份验证。 BinaryContent Cannot seek to %1 to read the operation data. 无法寻求 %1 读取操作数据。 Cannot seek to %1 to read the resource collection block. 无法寻求 %1 读取资源收集块。 Cannot open meta resource %1. 无法打开元资源%1。 BinaryLayout Cannot seek to %1 to read the embedded meta data count. 无法寻求 %1 读取嵌入式元数据计数。 Cannot seek to %1 to read the resource collection segment. 无法寻求 %1 读取资源收集段。 Unexpected mismatch of meta resources. Read %1, expected: %2. 元资源意外不匹配。 读取 %1，预期：%2。 Dialog Http authentication required 需要进行 Http 身份验证 You need to supply a Username and Password to access this site. 您需要提供用户名和密码来访问此站点。 Username: 用户名： Password: 密码： %1 at %2 %1，%2 DirectoryGuard Path "%1" exists but is not a directory. 路径“%1”存在，但不是目录。 Cannot create directory "%1". 无法创建目录“%1”。 ExtractCallbackImpl Cannot retrieve path of archive item %1. 无法检索存档项 %1 的路径。 Cannot remove already existing symlink %1. 无法移除已存在的符号链接 %1。 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Cannot create symlink at "%1". Another one is already existing. 无法在“%1”处创建符号链接。 已存在另一个符号链接。 Cannot read symlink target from file "%1". 无法从文件“%1”中读取符号链接目标。 Cannot create symlink at %1: %2 无法在 %1 创建符号链接：%2 InstallerBase Unable to start installer 无法启动安装程序 InstallerCalculator Components added as automatic dependencies: 组件作为自动依赖项添加： Components added as dependency for "%1": 添加为“%1”依赖项的组件： Components that have resolved dependencies: 包含已解决依赖项的组件： Selected components without dependencies: 无依赖项的所选组件： Recursion detected, component "%1" already added with reason: "%2" 检测到递归，组件“%1”已添加，原因为：“%2” Cannot find missing dependency "%1" for "%2". 找不到“%2”的缺失依赖项“%1”。 Impossible dependency resolution detected. Forced install component "%1" would be uninstalled because its dependency "%2" is marked for uninstallation with reason: "%3". 检测到无法解决的依赖关系。强制安装组件：“%1”将会被移除，因为它的依赖“%2”被标记为移除，原因：“%3”。 Components selected by alias "%1": 通过别名“%1”选中的组件： Recursion detected, component alias "%1" already added. 检测到递归，组件别名“%1”已添加。 Job Canceled 已取消 KDUpdater::AppendFileOperation Cannot backup file "%1": %2 无法备份文件“%1”：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Cannot find backup file for "%1". 找不到“%1”的备份文件。 Cannot restore backup file for "%1". 无法还原“%1”的备份文件。 Cannot restore backup file for "%1": %2 无法还原“%1”的备份文件：%2 KDUpdater::CopyOperation Cannot backup file "%1". 无法备份文件“%1”。 Cannot copy a non-existent file: %1 无法复制不存在的文件：%1 Cannot remove file "%1": %2 无法移除文件“%1”：%2 Cannot copy file "%1" to "%2": %3 无法将文件“%1”复制到“%2”：%3 Cannot delete file "%1": %2 无法删除文件“%1”：%2 Cannot restore backup file into "%1": %2 无法将备份文件还原为“%1”：%2 KDUpdater::DeleteOperation Cannot create backup of file "%1": %2 无法创建文件“%1”的备份：%2 Cannot restore backup file for "%1": %2 无法还原“%1”的备份文件：%2 KDUpdater::FileDownloader Download finished. 下载完成。 Cryptographic hashes do not match. 加密哈希不匹配。 Download canceled. 下载已取消。 %1 of %2 %1/%2 %1 downloaded. %1 已下载。 (%1/sec) (%1/秒) %n day(s), %n 天， %n hour(s), %n 小时， %n minute(s) %n 分钟， %n second(s) %n 秒， - %1%2%3%4 remaining. - 剩余 %1%2%3%4。 - unknown time remaining. - 剩余时间未知。 KDUpdater::HttpDownloader Cannot download %1. Writing to file "%2" failed: %3 无法下载 %1。 写入文件“%2”失败：%3 Cannot download %1. Cannot create file "%2": %3 无法下载 %1。 无法创建文件“%2”：%3 %1 at %2 %1，%2 Authentication request canceled. 身份验证请求已取消。 Secure Connection Failed 安全连接失败 There was an error during connection to: %1. 连接到该内容时出现错误：%1。 This could be a problem with the server's configuration, or it could be someone trying to impersonate the server. 此问题可能与服务器的配置相关，或者有人正在尝试模拟服务器。 If you have connected to this server successfully in the past or trust this server, the error may be temporary and you can try again. 如果您之前已成功连接到此服务器或信任此服务器，则此错误可能为暂时错误，可重试。 Try again 重试 Cannot download %1. Cannot create directory for "%2" 无法下载%1。无法为“%2”创建目录。 KDUpdater::LocalFileDownloader Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Writing to file "%1" failed: %2 写入文件“%1”失败：%2 KDUpdater::MkdirOperation Cannot create directory "%1": %2 无法创建目录“%1”：%2 Unknown error. 未知错误。 Cannot remove directory "%1": %2 无法移除目录“%1”：%2 KDUpdater::MoveOperation Cannot backup file "%1". 无法备份文件“%1”。 Cannot remove file "%1": %2 无法移除文件“%1”：%2 Cannot copy file "%1" to "%2": %3 无法将文件“%1”复制到“%2”：%3 Cannot remove file "%1". 无法移除文件“%1”。 Cannot restore backup file for "%1": %2 无法还原“%1”的备份文件：%2 KDUpdater::PrependFileOperation Cannot backup file "%1": %2 无法备份文件“%1”：%2 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Cannot find backup file for "%1". 找不到“%1”的备份文件。 Cannot restore backup file for "%1". 无法还原“%1”的备份文件。 Cannot restore backup file for "%1": %2 无法还原“%1”的备份文件：%2 KDUpdater::ResourceFileDownloader Cannot read resource file "%1": %2 无法读取资源文件“%1”：%2 KDUpdater::RmdirOperation Cannot remove directory "%1": %2 无法移除目录“%1”：%2 The directory does not exist. 目录不存在。 Cannot recreate directory "%1": %2 无法重新创建目录“%1”：%2 KDUpdater::Task %1 started %1 已开始 %1 cannot be stopped %1 无法停止 Cannot stop task %1 无法停止任务 %1 %1 cannot be paused %1 无法暂停 Cannot pause task %1 无法暂停任务 %1 Cannot resume task %1 无法恢复任务 %1 %1 done %1 已完成 KDUpdater::UpdateFinder Cannot access the package information of this application. 无法访问此应用程序的包信息。 No package sources set for this application. 没有为此应用程序设置包源。 %n update(s) found. 找到 %n 个更新。 Downloading Updates.xml from update sources. 正在从更新源下载 Updates.xml。 Cannot download package source %1 from "%2". 无法从“%2”下载包源 %1。 Updates.xml file(s) downloaded from update sources. 已从更新源下载 Updates.xml 文件。 Computing applicable updates. 正在计算适用的更新。 Application updates computed. 已计算应用程序更新。 KDUpdater::UpdatesInfoData Updates.xml contains invalid content: %1 Updates.xml 包含无效内容：%1 Cannot read "%1" 无法读取“%1” Root element %1 unexpected, should be "Updates". 意外的根元素 %1，应为“Updates”。 ApplicationName element is missing. 缺少 ApplicationName 元素。 ApplicationVersion element is missing. 缺少 ApplicationVersion 元素。 PackageUpdate element without Name PackageUpdate 元素无 Name PackageUpdate element without Version PackageUpdate 元素无 Version PackageUpdate element without ReleaseDate PackageUpdate 元素无 ReleaseDate Lib7z Internal code: %1 内部代码：%1 Not enough memory 内存不足 Error: %1 错误：%1 Cannot retrieve property %1 for item %2. 无法检索项目 %2 的属性 %1。 Property %1 for item %2 not of type VT_FILETIME but %3. 项目 %2 的属性 %1 不是 VT_FILETIME 类型，而是 %3。 Cannot convert UTC file time to system time. 无法将 UTC 文件时间转换为系统时间。 Cannot load codecs. 无法加载编解码器。 Cannot open archive "%1". 无法打开存档“%1”。 Cannot retrieve number of items in archive. 无法检索存档中的项目数。 Cannot retrieve path of archive item "%1". 无法检索存档项“%1”的路径。 Unknown exception caught (%1). 捕获到未知异常(%1)。 Cannot create temporary file: %1 无法创建临时文件：%1 Unsupported archive type. 不支持的存档类型。 Cannot create archive "%1" 无法创建存档“%1” Cannot create archive "%1": %2 无法创建存档“%1”：%2 Cannot remove old archive "%1": %2 无法移除旧存档“%1”：%2 Cannot rename temporary archive "%1" to "%2": %3 无法将临时存档“%1”重命名为“%2”：%3 Unknown exception caught (%1) 捕获到未知异常(%1) LocalPackageHub %1 contains invalid content: %2 %1 包含无效内容：%2 The file %1 does not exist. 文件 %1 不存在。 Cannot open %1. 无法打开 %1。 Parse error in %1 at %2, %3: %4 %1 中 %2、%3 的解析错误：%4 Root element %1 unexpected, should be 'Packages'. 意外的根元素 %1，应为“包”。 LockFile Cannot create lock file "%1": %2 无法创建锁定文件“%1”：%2 Cannot write PID to lock file "%1": %2 无法写入 PID 来锁定文件“%1”：%2 Cannot obtain the lock for file "%1": %2 无法获取文件“%1”的锁定：%2 Cannot release the lock for file "%1": %2 无法释放文件“%1”的锁定：%2 QInstaller No marker found, stopped after %1. 未找到任何标记，%1 后停止。 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Read failed after %1 bytes: %2 %1 字节后读取失败：%2 Copy failed: %1 复制失败：%1 Write failed after %1 bytes: %2 %1 字节后编写失败：%2 bytes 字节 KB KB MB MB GB GB TB TB PB PB EB EB ZB ZB YB YB Cannot remove file "%1": %2 无法移除文件“%1”：%2 Cannot remove directory "%1": %2 无法移除目录“%1”：%2 Cannot create directory "%1". 无法创建目录“%1”。 Cannot copy file from "%1" to "%2": %3 无法将文件从“%1”复制到“%2”：%3 Cannot move file from "%1" to "%2": %3 无法将文件从“%1”移动到“%2”：%3 Cannot create directory "%1": %2 无法创建目录“%1”：%2 Cannot open temporary file: %1 无法打开临时文件：%1 Cannot open temporary file for template %1: %2 无法打开模板 %1 的临时文件：%2 Cannot copy file "%1" to "%2": %3 无法将文件“%1”复制到“%2”：%3 Cannot copy file "%1" to "%2". 无法将文件“%1”复制到“%2”。 The specified module could not be found. 找不到指定的模块。 Invalid content in "%1". “%1”中的内容无效。 This may be solved by restarting the application after clearing the cache from: 清空此处缓存之后重启应用程序也许可以解决问题： QInstaller::Component Components cannot have children in updater mode. 更新程序模式下组件不得包含子项。 Error 错误 Error: Operation %1 does not exist. 错误：操作 %1 不存在。 Cannot resolve isDefault in %1 无法解决 %1 中的 isDefault Update Info: 更新信息： There was an error loading the selected component. This component cannot be installed. 加载选中组件的过程中出现错误。这个组件不会被安装。 Cannot open the requested UI file "%1": %2. %3 "%4" 无法打开请求的 UI 文件“%1”：%2. %3 "%4" Cannot load the requested UI file "%1": %2. %3 "%4" 无法加载请求的 UI 文件“%1”：%2. %3 "%4" Cannot open the requested license file "%1": %2. %3 "%4" 无法打开请求的许可文件“%1”：%2. %3 "%4" QInstaller::ComponentModel Component is marked for installation. 组件标记为安装。 Component is marked for uninstallation. 组件标记为卸载。 Component is installed. 组件已安装。 Component is not installed. 组件未安装。 Component Name 组件名称 Action 操作 Installed Version 安装的版本 New Version 新建版本 Release Date 发布日期 Size 大小 QInstaller::ComponentSelectionPage Default 默认 Select default components in the tree view. 在树视图中选择默认组件。 Reset 重置 Reset all components to their original selection state in the tree view. 在树视图中将所有组件重置为其原始选择状态。 Select All 全选 Select all components in the tree view. 在树视图中选择所有组件。 Deselect All 取消全选 Deselect all components in the tree view. 在树视图中删除所有组件。 Select a Qt Board Support Package file to install additional content that is not directly available from the online repositories. 选择 Qt Board Support Package 文件以安装无法直接从在线存储库中获得的附加内容。 Filter the enabled repository categories 过滤已启用的存储库类别 This component will occupy approximately %1 on your hard disk drive. 此组件大约占用您硬盘驱动器 %1 的空间。 Open File 打开文件 Select Components 选择组件 Please select the components you want to update. 请选择要更新的组件。 Please select the components you want to install. 请选择要安装的组件。 Please select the components you want to uninstall. 请选择要卸载的组件。 Select the components to install. Deselect installed components to uninstall them.<br>Any components already installed will not be updated. 选择要安装的组件。 取消选择已安装组件以卸载它们。 所有已安装的组件均不会更新。 Mandatory components need to be updated first before you can select other components to update. 必须先更新必备组件，然后才能选择其他组件进行更新。 Search 搜索 Browse &QBSP files 浏览&QBSP文件 Select 选择 Error 错误 Create Offline Installer 创建离线安装程序 Create offline installer from selected components, instead of installing now. 根据选中组件创建离线安装程序，而不是现在就安装。 QInstaller::ConsumeOutputOperation <to be saved installer key name> <executable> [argument1] [argument2] [...] <待保存为安装程序密匙名称> <可执行> [argument1] [argument2] [...] Needed installer object in %1 operation is empty. %1 操作中的所需安装程序对象为空。 Cannot save the output of "%1" to an empty installer key value. 无法将“%1”的输出保存为空安装程序密钥值。 Failed to run command: "%1": %2 运行命令“%1”失败：%2 QInstaller::CopyDirectoryOperation <source> <target> ["forceOverwrite"] <源> <目标> ["forceOverwrite"] Invalid argument in %1: Third argument needs to be forceOverwrite, if specified. %1 中的参数无效：如果指定，则第三个参数需要为 forceOverwrite。 Invalid argument in %1: Directory "%2" is invalid. %1 中的参数无效：目录“%2”无效。 Cannot create directory "%1". 无法创建目录“%1”。 Failed to overwrite "%1". 覆盖“%1”失败。 Cannot copy file "%1" to "%2": %3 无法将文件“%1”复制到“%2”：%3 Cannot remove file "%1". 无法移除文件“%1”。 QInstaller::CopyFileTask Invalid task item count. 任务项目计数无效。 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Writing to file "%1" failed: %2 写入文件“%1”失败：%2 QInstaller::CreateDesktopEntryOperation Cannot backup file "%1": %2 无法备份文件“%1”：%2 Failed to overwrite file "%1". 覆盖文件“%1”失败。 Cannot write desktop entry to "%1". 无法将桌面条目写入“%1”。 QInstaller::CreateLinkOperation Cannot create link from "%1" to "%2". 无法创建从“%1”到“%2”的链接。 Cannot remove link from "%1" to "%2". 无法移除“%1”到“%2”的链接。 QInstaller::CreateLocalRepositoryOperation Cannot set permissions for file "%1". 无法设置文件“%1”的权限。 Cannot remove file "%1": %2 无法移除文件“%1”：%2 Cannot move file "%1" to "%2": %3 无法将文件“%1”移动到“%2”：%3 Installer at "%1" needs to be an offline one. “%1”的安装程序需要是脱机安装程序。 Cannot create path "%1". 无法创建路径“%1”。 Cannot remove directory "%1". 无法删除目录“%1”。 Cannot open file "%1" for reading. 无法打开文件“%1”进行读取。 Cannot read file "%1": %2 无法读取文件“%1”：%2 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot create target directory: "%1". 无法创建目标目录：“%1”。 Unknown exception caught: %1. 捕获到未知异常：%1。 Removing file "%1". 正在移除文件“%1”。 Cannot remove file "%1". 无法移除文件“%1”。 Cannot remove directory "%1": %2 无法移除目录“%1”：%2 Cannot create archive "%1": %2 无法创建存档“%1”：%2 Unsupported archive "%1": no handler registered for file suffix "%2". 不支持的存档“%1”：没有处理程序注册在文件后缀“%2”名下。 QInstaller::CreateShortcutOperation <target> <link location> [target arguments] ["workingDirectory=..."] ["iconPath=..."] ["iconId=..."] ["description=..."] <目标> <链接位置> [target arguments] ["workingDirectory=..."] ["iconPath=..."] ["iconId=..."] ["description=..."] Cannot create directory "%1": %2 无法创建目录“%1”：%2 Failed to overwrite "%1": %2 覆盖“%1”失败：%2 Cannot create link "%1": %2 无法创建链接“%1”：%2 QInstaller::DownloadArchivesJob Canceled 已取消 Downloading hash signature failed. 哈希签名下载失败。 Download Error 下载错误 Cannot download archive %1: %2 无法下载存档 %1：%2 Cannot fetch archives: %1 Error while loading %2 无法获取存档：%1 加载 %2 时出现错误 Downloading archive "%1" for component %2. 正在下载组件 %2 的存档“%1”。 Scheme %1 not supported (URL: %2). 不支持方案 %1 (URL：%2)。 Cannot find component for %1. 无法找到 %1 的组件。 %1 of %2 %1/%2 %1 downloaded. %1 已下载。 %n day(s), %n 天， %n hour(s), %n 小时， %n minute(s) %n 分钟， %n second(s) %n 秒， - %1%2%3%4 remaining. - 剩余 %1%2%3%4。 - unknown time remaining. - 剩余时间未知。 Archive: 存档： Total: 总计： Retry count (%1) exceeded 超过重试次数(%1) Hash verification while downloading failed. This is a temporary error, please retry. Expected: %1 Downloaded: %2 下载时的哈希验证失败。 此错误为临时错误，请重试。 预期的：%1 已下载：%2 Cannot verify Hash Expected: %1 Downloaded: %2 无法验证哈希 预期的：%1 已下载：%2 QInstaller::Downloader Target file "%1" already exists but is not a file. 目标文件“%1”已存在，但不是文件。 Cannot open file "%1" for writing: %2 %2 is a sentence describing the error %2 is a sentence describing the error 无法打开文件“%1”进行写入：%2 File "%1" not open for writing: %2 %2 is a sentence describing the error. %2 is a sentence describing the error. 未打开文件“%1”进行写入：%2 Writing to file "%1" failed: %2 %2 is a sentence describing the error. %2 is a sentence describing the error. 写入文件“%1”失败：%2 Redirect loop detected for "%1". 检测到“%1”的重定向循环。 Network error while downloading '%1': %2. 下载“%1”时出现网络错误：%2。 Unknown network error while downloading "%1". %1 is a sentence describing the error %1 is a sentence describing the error 下载“%1”时出现未知的网络错误。 Network transfers canceled. 网络转移已取消。 Pause and resume not supported by network transfers. 网络传输不支持中止和恢复。 Invalid source URL "%1": %2 %2 is a sentence describing the error %2 is a sentence describing the error 无效的源 URL“%1”：%2 QInstaller::ElevatedExecuteOperation Cannot start detached: "%1" 无法启动分离：“%1” Cannot start: "%1": %2 无法启动：“%1”：%2 Program crashed: "%1" 崩溃程序：“%1” Execution failed (Unexpected exit code: %1): "%2" 执行失败(意外退出代码：%1)：“%2” QInstaller::FakeStopProcessForUpdateOperation Cannot get package manager core. 无法获取包管理器核心内容。 This process should be stopped before continuing: %1 应先停止此过程后再继续：%1 These processes should be stopped before continuing: %1 应先停止这些过程后再继续：%1 QInstaller::FileTaskObserver %1 of %2 %1/%2 %1 received. %1 已接收。 (%1/sec) (%1/秒) %n day(s), %n 天， %n hour(s), %n 小时， %n minute(s) %n 分钟， %n second(s) %n 秒， - %1%2%3%4 remaining. - 剩余 %1%2%3%4。 - unknown time remaining. - 剩余时间未知。 QInstaller::FinishedPage Finished the %1 Setup 正在完成 %1 向导 Finished 已完成 Click %1 to exit the %2 Setup. 单击 %1 退出 %2 向导。 Restart 重新启动 Run %1 now. 立即运行 %1。 The %1 Setup failed. %1 向导失败。 QInstaller::GlobalSettingsOperation Settings are not writable. 设置不可写入。 Failed to write settings. 写入设置失败。 QInstaller::InstallIconsOperation <source path> [vendor prefix] <源路径> [vendor prefix] Invalid Argument: source directory must not be empty. 参数无效：源目录不得为空。 Cannot backup file "%1": %2 无法备份文件“%1”：%2 Failed to overwrite "%1": %2 覆盖“%1”失败：%2 Failed to copy file "%1": %2 复制文件“%1”失败：%2 Cannot create directory "%1": %2 无法创建目录“%1”：%2 Cannot prepare to backup file "%1": %2 无法为备份文件“%1”准备：%2 QInstaller::IntroductionPage Welcome 欢迎 Welcome to the %1 Setup. 欢迎使用 %1 安装向导。 &Add or remove components 添加或移除组件 &Update components 更新组件 &Remove all components 移除所有组件 Retrieving information from remote installation sources... 正在从远程安装源检索信息… At least one valid and enabled repository required for this action to succeed. 此操作至少需要一个处于启用状态的有效资料档案库。 No updates available. 无可用更新。 &Quit 退出 There is an important update available. Please select '%1' first 有重要的更新可供使用，请先选择“%1” QInstaller::LicenseAgreementPage License Agreement 许可协议 Alt+A Agree license Alt+A Please read the following license agreement. You must accept the terms contained in this agreement before continuing with the installation. 请阅读以下许可协议。 您必须接受此协议中的条款才能继续安装。 I accept the license. 我接受此许可。 Please read the following license agreements. You must accept the terms contained in these agreements before continuing with the installation. 请阅读以下许可协议。 您必须接受这些协议中的条款才能继续安装。 I accept the licenses. 我接受这些许可。 QInstaller::LicenseOperation No license files found to copy. 未找到要复制的许可文件。 Needed installer object in %1 operation is empty. %1 操作中的所需安装程序对象为空。 Can not write license file "%1". 无法写入许可文件“%1”。 QInstaller::LineReplaceOperation Invalid argument in %1: Empty search argument is not supported. %1 中的无效参数：不支持空搜索参数。 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 QInstaller::MetadataJob Missing package manager core engine. 缺少包管理器核心引擎。 Unpacking compressed repositories. This may take a while... 解压压缩资料档案库。 这可能需要一些时间... Metadata download canceled. 元数据下载已取消。 Unknown exception during extracting. 提取过程中出现未知异常。 Missing proxy credentials. 缺少代理凭据。 Authentication failed. 身份验证失败。 Unknown exception during download. 下载过程中出现未知异常。 Failure to fetch repositories. 无法获取资料档案库。 Extracting meta information... 正在提取元信息... Checksum mismatch detected for "%1". 检测到“%1”的校验和不匹配。 Error while extracting archive "%1": %2 提取存档“%1”时出错：%2 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Unsupported archive "%1": no handler registered for file suffix "%2". 不支持的存档“%1”：没有处理程序注册在文件后缀“%2”名下。 Fetching latest update information... 正在获取最新更新信息…… Updating local cache with %n new items... 正在更新本地缓存中的%n个新项目…… Clearing the cache directory and restarting the application may solve this. 正在清空缓存目录并且重启应用程序也许可以解决这个问题。 Unknown exception during updating cache. 更新缓存过程中的未知异常。 Cannot open extracted file "%1" for reading: %2 无法为了读取%2打开已经提取的文件”%1“ Cannot open file "%1" for writing: %2 无法为了写入%2打开文件“%1” Retrieving information from remote repositories... 正在从远程存储库检索信息... Retrieving meta information from remote repository... 正在从远程资料档案库中检索元信息... QInstaller::PackageManagerCore Error writing Maintenance Tool 编写维护工具时出错 Downloading packages... 正在下载包... Installation canceled by user. 用户已取消安装。 All downloads finished. 所有下载均已完成。 Canceling the Installer 正在取消安装程序 Authentication Error 身份验证错误 Some components could not be removed completely because administrative rights could not be acquired: %1. 无法完全移除某些组件，因为无法获取管理权限：%1。 Unknown error. 未知错误。 Some components could not be removed completely because an unknown error happened. 由于出现未知错误，无法彻底移除某些组件。 The directory you selected already exists and contains an installation. Choose a different target for installation. 您选择的目录已存在且包含安装程序。 选择其他目标进行安装。 Warning 警告 You have selected an existing, non-empty directory for installation. Note that it will be completely wiped on uninstallation of this application. It is not advisable to install into this directory as installation might fail. Do you want to continue? 您已选择现有非空目录进行安装。 请注意，在卸载此应用程序时将完全删除该目录。 不建议安装到此目录中，因为安装可能会失败。 是否要继续? You have selected an existing file or symlink, please choose a different target for installation. 您选择的是现有文件或符号连接，请选择其他目标进行安装。 The installation path cannot be empty, please specify a valid directory. 安装路径不得为空，请指定有效目录。 The installation path cannot be relative, please specify an absolute path. 安装路径不得为相对路径，请指定一个绝对路径。 The path or installation directory contains non ASCII characters. This is currently not supported! Please choose a different path or installation directory. 路径或安装目录包含非 ASCII 字符。 目前尚不支持此内容! 请选择不同的路径或安装目录。 As the install directory is completely deleted, installing in %1 is forbidden. 由于安装路径已被完全删除，因此无法在 %1 中安装。 The path you have entered is too long, please make sure to specify a valid path. 输入的路径过长，请确保指定的路径有效。 The path you have entered is not valid, please make sure to specify a valid target. 输入的路径无效，请确保指定的目标有效。 The path you have entered is not valid, please make sure to specify a valid drive. 输入的路径无效，请确保指定的驱动器有效。 The installation path must not end with '.', please specify a valid directory. 安装路径不得以“.”结尾，请指定一个有效的目录。 The installation path must not contain "%1", please specify a valid directory. 安装路径不得包含“%1”，请指定一个有效的目录。 Application not running in Package Manager mode. 应用程序未在包管理器模式下运行。 No installed packages found. 未找到任何已安装的软件包。 Application running in Uninstaller mode. 应用程序在卸载程序模式下运行。 There is an important update available, please run the updater first. 有重要的更新可供使用，请先运行更新程序。 Cannot resolve all dependencies. 无法解析所有依赖项。 Cannot install component %1. Component is installed only as automatic dependency to %2. 无法安装组件 %1。组件仅作为 %2 的自动依赖时安装。 Cannot install component %1. Component is not checkable, meaning you have to select one of the subcomponents. 无法安装组件 %1。组件不可选择，这意味着您必须选择其中一个子组件。 Component %1 already installed 组件 %1 已安装 Cannot install %1. Component is virtual. 无法安装 %1。组件是虚拟的。 Cannot install %1. Component not found. 无法安装 %1。未找到组件。 Cannot elevate access rights while running from command line. Please restart the application as administrator. 请以管理员身份重新启动应用程序。 Error while elevating access rights. 提升访问权限时发生错误。 Error 错误 Not enough disk space to store temporary files and the installation. %1 are available, while the minimum required is %2. 没有足够的磁盘空间来存储临时文件和安装。%1 可用，但至少需要 %2。 Not enough disk space to store all selected components! %1 are available, while the minimum required is %2. 没有足够的磁盘空间来存储所有选定的组件! %1 可用，但至少需要 %2。 The volume you selected for installation seems to have sufficient space for installation, but there will be less than 1% of the volume's space available afterwards. 您选择安装的容量似乎有足够的安装空间，但之后的可用空间将不到该容量的 1%。 The volume you selected for installation seems to have sufficient space for installation, but there will be less than 100 MB available afterwards. 您选择安装的容量似乎有足够的安装空间，但之后的可用空间将不到 100 MB。 Installation will use %1 of disk space. 安装程序将使用 %1 的磁盘空间。 Invalid 无效 User input is required but the output device is not associated with a terminal. 需要用户输入，但输出设备并未与任何终端裝置建立关联。 Cannot install %1. Component is a descendant of a virtual component %2. 无法安装 %1。组件是虚拟组件 %2 的后代。 The estimated installer size %1 would exceed the supported executable size limit of %2. The application may not be able to run. 预估的安装程序大小 %1 可能超过被支持的可执行程序大小限制 %2。应用程序可能无法运行。 Components about to be removed: 即将要移除的组件： Cannot install component %1. There was a problem loading this component, so it is marked unstable and cannot be selected. 无法安装组件 %1。加载这个组件时发生错误，所以它被标记为不稳定并且不能被选择。 Not enough disk space to store temporary files! %1 are available, while the minimum required is %2. You may select another location for the temporary files by modifying the local cache path from the installer settings. 没有足够的硬盘空间存储临时文件！有%1可用，但是最少需要%2。您可以通过修改安装程序设置中的本地缓存路径来为这些临时文件指定另外一个存储位置。 Cannot resolve components to uninstall. 无法解析要移除的组件。 Cannot select alias %1. There was a problem loading this alias, so it is marked unstable and cannot be selected. 无法选择别名%1。加载这一别名时发生问题，所以它被标识为不稳定，并且无法被选中。 Cannot select %1. Alias is marked virtual, meaning it cannot be selected manually. 无法选择%1。别名被标记为虚拟，意味着它不能被手动选中。 Created installer will use %1 of disk space. 创建的安装程序将使用%1的磁盘空间。 QInstaller::PackageManagerCorePrivate Unresolved dependencies 未解析依赖项 Error 错误 Access error 访问错误 Format error 格式错误 Cannot write installer configuration to %1: %2 无法将安装程序配置写入 %1：%2 Stop Processes 停止过程 These processes should be stopped to continue: %1 应停止这些过程以继续： %1 Installation canceled by user 用户已取消安装 Retry count exceeded 超过重试次数 Writing maintenance tool. 编写维护工具。 Failed to seek in file %1: %2 无法在文件 %1 中搜索：%2 Maintenance tool is not a bundle 维护工具不是捆绑包 Cannot remove data file "%1": %2 无法移除数据文件“%1”：%2 Cannot write maintenance tool data to %1: %2 无法将维护工具数据写入 %1：%2 Cannot write maintenance tool to "%1": %2 无法将维护工具写入“%1”：%2 Cannot remove temporary data file "%1": %2 无法删除临时数据文件 "%1": %2 Cannot write maintenance tool binary data to %1: %2 无法将维护工具二进制数据写入 %1：%2 Writing offline base binary. 正在编写离线基本二进制文件。 Cannot remove file "%1": %2 无法移除文件“%1”：%2 Cannot create directory "%1". 无法创建目录“%1”。 Cannot write offline binary to "%1": %2 无法将离线二进制文件写入 "%1": %2 Cannot remove temporary file "%1": %2 无法删除临时文件 "%1": %2 Variable 'TargetDir' not set. 未设置变量“TargetDir”。 Preparing the installation... 正在准备安装… It is not possible to install from network location 无法从网络位置进行安装 Creating local repository 正在创建本地资料档案库 Creating Maintenance Tool 正在创建维护工具 Installation finished! 安装已完成! Installation aborted! 安装已中止! It is not possible to run that operation from a network location 无法从网络位置运行该操作 Removing deselected components... 正在移除未选中的组件... Update finished! 更新已完成! Update aborted! 更新已中止! Removal completed successfully. 成功卸载。 Removal aborted. 卸载已中止。 Cannot create target directory for installer. 无法为安装程序创建目标目录。 Preparing offline generation... 正在准备离线生成...... Preparing installer configuration... 正在准备安装程序配置...... Creating the installer... 正在创建安装程序...... Failed to create offline installer. %1 无法创建离线安装程序。%1 Cannot remove temporary directory "%1". 无法删除临时目录“%1”。 Offline generation completed successfully. 离线生成已顺利完成。 Offline generation aborted! 已放弃离线生成！ Installing component %1 正在安装组件 %1 Installer Error 安装程序错误 Error during installation process (%1): %2 安装过程中出现错误(%1) %2 Done 已完成 Cannot prepare removal 无法准备卸载 Cannot start removal 无法开始卸载 Error during removal process: %1 卸载过程中出现错误： %1 Unknown error 未知错误 Cannot retrieve remote tree %1. 无法检索远程树 %1。 Failure to read packages from %1. 无法从 %1 读取包。 Cannot retrieve meta information: %1 无法检索元信息：%1 Cannot find any update source information. 找不到任何更新源信息。 Dependency cycle between components "%1" and "%2" detected. 检测到组件“%1”和“%2”之间的依赖项循环。 Preparing to unpack components... 正在准备解压组件...... %1 of %2 operations completed. %2 个操作中的 %1 个已经完成。 Unpacking components... 正在解压组件...... %1 of %2 operations rolled back. %2 个操作中的 %1 个已经回滚。 Rollbacks complete. 回滚完成。 %1 of %2 components installed. %2 个组件中的 %1 个已经安装。 All components installed. 所有组件已安装。 Loading component scripts... 正在加载组件脚本…… Alias declares name that conflicts with an existing component "%1" 别名声明的名称与已经存在的组件“%1”冲突。 Unresolved component aliases 无法解析的组件别名 Cyclic dependency between aliases "%1" and "%2" detected. 检测到别名“%1”和“%2”之间的依赖项循环。 QInstaller::PackageManagerGui %1 Setup %1 安装程序 Maintain %1 维护 %1 Do you want to cancel the installation process? 是否要取消安装过程? Do you want to cancel the removal process? 是否要取消卸载过程? Do you want to quit the installer application? 是否要退出安装程序应用程序? Do you want to quit the uninstaller application? 是否要退出卸载程序应用程序? Do you want to quit the maintenance application? 是否要退出维护应用程序? %1 Question %1 问题 &Settings 设置 Specify proxy settings and configure repositories for add-on components. 指定代理设置，并为附加组件配置存储库。 Error 错误 It is not possible to install from network location. Please copy the installer to a local drive 无法从网络位置进行安装。 请将安装程序复制到本地驱动器 QInstaller::PerformInstallationForm &Show Details 显示详细信息(&S) &Hide Details 隐藏详细信息(&H) QInstaller::PerformInstallationPage U&ninstall 卸载(&N) Uninstalling %1 正在卸载 %1 &Update 更新(&U) Updating components of %1 正在更新 %1 的组件 &Install 安装(&I) Installing %1 正在安装 %1 Installing 正在安装 Updating 正在更新 Uninstalling 正在卸载 &Create Offline Installer 创建离线安装程序(&C) Creating Offline Installer for %1 正在为%1创建离线安装程序 Creating Offline Installer 正在创建离线安装程序 QInstaller::ProxyCredentialsDialog Dialog 对话框 The proxy %1 requires a username and password. 代理 %1 需要输入用户名和密码。 Username: 用户名： Username 用户名 Password: 密码： Password 密码 Proxy Credentials 代理凭据 QInstaller::ReadyForInstallationPage U&ninstall 卸载(&N) Ready to Uninstall 准备卸载 All required information is now available to begin removing %1 from your computer.<br><font color="red">The program directory %2 will be deleted completely</font>, including all content in that directory! 安装程序现已准备好从您的计算机中移除 %1。<br><font color="red">将彻底删除程序目录 %2</font>，目录内所有内容也将被删除! U&pdate 更新(&P) Ready to Update Packages 准备更新包 All required information is now available to begin updating your installation. 安装程序现已准备好安装您的更新。 &Install 安装(&I) Ready to Install 准备安装 All required information is now available to begin installing %1 on your computer. 安装程序现已准备好在您的计算器中安装 %1。 Ready to Update 准备更新 Create Offline Installer 创建离线安装程序 Ready to Create Offline Installer 准备创建离线安装程序 All required information is now available to create an offline installer for selected components. 为所选组件创建离线安装程序的所需信息都已经准备好。 QInstaller::RegisterFileTypeOperation Registering file types is only supported on Windows. Windows 不支持注册文件类型。 Register File Type: Invalid arguments 注册文件类型：无效的参数 QInstaller::RemoteObject Cannot read all data after sending command: %1. Bytes expected: %2, Bytes received: %3. Error: %4 发送命令后无法读取所有数据：%1 预期字节：%2，收到的字节：%3。 错误: %4 QInstaller::ReplaceOperation Current search argument calling "%1" with empty search argument is not supported. 不支持当前的搜索参数使用空搜索参数调用“%1”。 Current mode argument calling "%1" with arguments "%2" is not supported. Please use string or regex. 当前使用参数“%2”的模式参数调用“%1”不被支持。请使用字符串或正则表达式。 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 QInstaller::Resource Cannot open resource %1 for reading. 无法打开资源 %1 进行读取。 Read failed after %1 bytes: %2 %1 字节后读取失败：%2 Write failed after %1 bytes: %2 %1 字节后编写失败：%2 QInstaller::RestartPage Finished the %1 Setup 正在完成 %1 安装向导 QInstaller::ScriptEngine Cannot open script file at %1: %2 无法在 %1 处打开脚本文件：%2 Exception while loading the component script "%1": %2 加载组件脚本“%1”时出现异常：%2 Unknown error. 未知错误。 on line number: 在线号码： QInstaller::SelfRestartOperation Installer object needed in operation %1 is empty. 操作 %1 中所需的安装程序对象为空。 Self Restart: Only valid within updater or package manager mode. 自动重启：仅在更新程序或包管理器模式下有效。 Self Restart: Invalid arguments 自动重启：无效的参数 QInstaller::ServerAuthenticationDialog Server Requires Authentication 服务器需要进行身份验证 You need to supply a username and password to access this site. 您需要提供用户名和密码来访问此站点。 Username: 用户名： Password: 密码： %1 at %2 %1，%2 QInstaller::SettingsOperation Missing argument(s) "%1" calling %2 with arguments "%3". 使用参数“%3”调用 %2 时缺少参数“%1”。 Current method argument calling "%1" with arguments "%2" is not supported. Please use set, remove, add_array_value, or remove_array_value. 使用参数“%2”调用“%1”的当前方法参数不受支持。 请使用 set、remove、add_array_value 或 remove_array_value。 QInstaller::SimpleMoveFileOperation None of the arguments can be empty: source "%1", target "%2". 所有参数均不得为空：源“%1”，目标“%2”。 Cannot move file from "%1" to "%2", because the target path exists and is not removable. 无法将文件从“%1”移动到“%2”，因为目标路径存在且无法移除。 Cannot move file "%1" to "%2": %3 无法将文件“%1”移动到“%2”：%3 Moving file "%1" to "%2". 正在将文件“%1”移动到“%2”。 QInstaller::StartMenuDirectoryPage Start Menu shortcuts 开始菜单快捷方式 Select the Start Menu in which you would like to create the program's shortcuts. You can also enter a name to create a new directory. 选择您要在其中创建程序快捷方式的“开始”菜单。 您还可以输入名称以创建新目录。 QInstaller::TargetDirectoryPage Installation Folder 安装文件夹 Please specify the directory where %1 will be installed. 请指定将安装 %1 的目录。 Alt+R Browse file system to choose a file Alt+R B&rowse... 浏览(&R)... Browse file system to choose the installation directory. 浏览文件系统以选择安装目录。 Select Installation Folder 选择安装文件夹 QInstaller::TestRepository Missing package manager core engine. 缺少包管理器核心引擎。 Empty repository URL. 空资料档案库 URL。 Download canceled. 下载已取消。 Timeout while testing repository "%1". 测试资料档案库“%1”时超时。 Cannot parse Updates.xml: %1 无法解析 Updates.xml：%1 Cannot open Updates.xml for reading: %1 无法打开 Updates.xml 进行读取：%1 Authentication failed. 验证失败。 Unknown error while testing repository "%1". 测试资料档案库“%1”时出现未知错误。 QObject Error acquiring admin rights 获取管理员权限时出错 Another %1 instance is already running. Wait until it finishes, close it, or restart your system. 另一个 %1 实例已运行。 请等待至完成、关闭或重新启动系统。 Cannot start installer binary as updater. 无法将安装程序二进制文件作为更新程序启动。 Cannot start installer binary as package manager. 无法将安装程序二进制文件作为包管理器启动。 Cannot start installer binary as uninstaller. 无法将安装程序二进制文件作为卸载程序启动。 Empty repository list for option 'addRepository'. “addRepository”选项的空存储库列表。 Empty repository list for option 'addTempRepository'. “addTempRepository”选项的空存储库列表。 Empty repository list for option 'setTempRepository'. ‘setTempRepository'选项的空存储库列表。 Empty repository list for option 'installCompressedRepository'. ‘installCompressedRepository'选项的空存储库列表。 The file %1 does not exist. 文件 %1 不存在。 Arguments missing for option %1 选项 %1 缺少参数 Invalid button value %1 无效的按钮值 %1 Incorrect arguments for %1 %1 的参数不正确 Please make sure that the current user has read access to file "%1" or try running %2 as an administrator. 请确保当前用户拥有文件“%1”的读取权限，或尝试以管理员身份运行 %2。 Invalid value for 'max-concurrent-operations'. “max-concurrent-operations”的值无效。 Empty value for option 'cache-path'. “cache-path”选项的值为空。 RemoteClient Cannot get authorization. 无法获取授权。 Cannot get authorization that is needed for continuing the installation. Either abort the installation or use the fallback solution by running %1 as a user with the appropriate rights and then clicking OK. 无法获得继续安装所需的授权。 请中止安装或通过运行 %1 以具有适当权限的用户身份使用回退解决方案，然后按“确定”。 Cannot get authorization that is needed for continuing the installation. Please start the setup program as a user with the appropriate rights, or accept the elevation of access rights if being asked. 无法获得继续安装所需的授权。 请以具有适当权限的用户身份启动安装程序。 或者在被询问时接受访问权限的提升。 ResourceCollectionManager Cannot open resource %1: %2 无法打开资源 %1：%2 Settings Cannot open settings file %1 for reading: %2 无法打开设置文件 %1 进行读取：%2 Categories 类别 SettingsDialog Settings 设置 Network 网络 No proxy 无代理 System proxy settings 系统代理设置 Manual proxy configuration 手动代理配置 HTTP proxy: HTTP 代理： Port: 端口： FTP proxy: FTP 代理： Repositories 资料档案库 Add Username and Password for authentication if needed. 如有必要，请添加用户名和密码进行身份验证。 Use temporary repositories only 仅使用临时资料档案库 Add 添加 Remove 移除 Test 条件测试 Show Passwords 显示密码 Check this to use repository during fetch. 验证此内容以在获取期间使用资料档案库。 Add the username to authenticate on the server. 添加用户名以在服务器端进行身份验证。 Add the password to authenticate on the server. 添加密码以在服务器端进行身份验证。 The server's URL that contains a valid repository. 服务器 URL 包含有效的资料档案库。 An error occurred while testing this repository. 测试此资料档案库时出错。 The repository was tested successfully. 资料档案库测试成功。 Do you want to disable the repository? 是否要禁用资料档案库? Do you want to enable the repository? 是否要启用资料档案库? Hide Passwords 隐藏密码 Use 使用 Username 用户名 Password 密码 Repository 资料档案库 Default repositories 默认资料档案库 Temporary repositories 临时资料档案库 User defined repositories 用户定义的资料档案库 Select All 全选 Deselect All 取消全选 Local cache 本地缓存 The meta information from remote repositories is cached to disk to improve loading times. You may select another directory to store the cache or clear the contents of the current cache. 为了缩短加载时间，远程仓库的元信息被缓存到硬盘。您可以选择另外一个目录来存储缓存，或者清空当前缓存的内容。 Path for cache: 缓存的路径： Deletes the contents of the cache directory 删除缓存目录中的内容 Clear cache 清空缓存 Clearing cache... 正在清空缓存... UpdateOperation Cannot write to registry path %1. 无法写入注册表路径 %1。 Registry path %1 is not writable. 注册表路径 %1 不可写入。 exactly %1 正好 %1 at least %1 至少 %1 not more than %1 不超过 %1 %1 or %2 %1 或 %2 %1 to %2 %1 至 %2 Invalid arguments in %1: %n arguments given, %2 arguments expected. %1 中的参数无效：给定 %n 个参数，期望 %2 个参数。 Invalid arguments in %1: %n arguments given, %2 arguments expected in the form: %3. %1 中的参数无效：给定 %n 个参数，表格中预期的 %2 个参数：%3。 Renaming file "%1" to "%2" failed: %3 将文件“%1”重命名为“%2”失败：%3 QInstaller::ComponentSelectionPagePrivate Filter 筛选 Error 错误 Information 组件信息 QInstaller::ExtractArchiveOperation Extracting "%1" 正在提取“%1” Unsupported archive "%1": no handler registered for file suffix "%2". 不支持的存档“%1”：没有处理程序注册在文件后缀名“%2”下。 Cannot open archive "%1" for reading: %2 无法打开存档“%1”进行读取：%2 Error while reading contents of archive "%1": %2 读取存档“%1”内容时发生错误：%2 Removing files extracted from "%1" 正在移除从“%1”中提取的文件 QInstaller::QFileDialogProxy User input is required but the output device is not associated with a terminal. 需要用户输入，但输出设备并未与任何终端裝置建立关联。 QInstaller::ExtractArchiveOperation::Worker Could not create handler object for archive "%1": "%2". 无法为存档“%1”创建处理程序对象：“%2”。 Cannot open archive "%1" for reading: %2 无法打开存档“%1”进行读取：%2 Error while extracting archive "%1": %2 提取存档“%1”时出错：%2 AboutApplicationDialog About %1 installer 关于 %1 安装程序 About %1 Maintenance Tool 关于 %1 维护工具 QInstaller::ExtractWorker Cannot open archive for reading: %1 无法打开存档进行读取：%1 Cannot read entry header: %1 无法读取条目头部：%1 Cannot write entry "%1" to disk: %2 无法将条目“%1”写入磁盘：%2 QInstaller::LibArchiveArchive Cannot open archive for reading: %1 无法打开存档进行读取：%1 Cannot read entry header: %1 无法读取条目头部：%1 Cannot write entry "%1" to disk: %2 无法将条目“%1”写入磁盘：%2 Cannot open file "%1" for writing: %2 无法打开文件“%1”进行写入：%2 Cannot open file "%1" for reading: %2 无法打开文件“%1”进行读取：%2 Cannot write entry header for "%1": %2 无法为“%1”写入条目头部：%2 UninstallerCalculator Deselected Components: 取消组件选择： Components replaced by "%1": 组件被替换为“%1”： Removing virtual components without existing dependencies: 正在移除没有现存依赖的虚拟组件： Components dependency "%1" removed: 组件依赖“%1”已移除： Components autodependency "%1" removed: 组件自动依赖“%1”已移除： GenericDataCache Cannot initialize cache with empty path. 无法使用空白路径初始化缓存。 Cannot create directory "%1" for cache. 无法为缓存创建“%1”目录。 Cannot initialize cache: %1 无法初始化缓存：%1 Cannot clear invalidated cache. 无法清空失效的缓存。 Cannot remove manifest file: %1 无法移除清单(manifest)文件：%1 Error while clearing cache: %1 清空缓存时发生错误：%1 Cannot retrieve items from invalidated cache. 无法从失效的缓存中获取项目。 Cannot retrieve item from invalidated cache. 无法从失效的缓存中获取项目。 Cannot register item to invalidated cache. 无法向失效的缓存中注册项目。 Cannot register null item. 无法注册空项目。 Cannot register invalid item with checksum %1 无法注册校验和为%1的无效项目 Cannot register item with checksum %1. An item with the same checksum already exists in cache. 无法注册校验和为%1的项目。缓存中已经存在一个相同校验和的项目。 Error while copying item to path "%1": %2 复制项目到“%1”路径时发生错误：%2 Cannot remove item from invalidated cache. 无法从失效缓存中移除项目。 Cannot remove item specified by checksum %1: no such item exists. 无法移除通过校验和%1指定的项目：查无此项。 Error while removing directory "%1": %2 移除“%1”目录时发生错误：%2 Error while invalidating cache: %1 使缓存失效时发生错误：%1 Cannot open manifest file: %1 无法打开清单(manifest)文件：%1 Cannot write contents for manifest file: %1 无法写入清单(manifest)文件的内容：%1 Cannot synchronize invalidated cache. 无法同步失效的缓存。 Unknown register mode selected! 未知的注册模式被选中！ TabController Cache cleared successfully! 缓存清空成功！