ComponentCould not open archive %1: %2アーカイブ %1 を開けませんでした: %2DialogHttp authentication requiredHTTP ユーザ認証が必要ですYou need to supply a Username and Password to access this site.このサイトにアクセスするにはユーザ名とパスワードが必要です。Username:ユーザ名:Password:パスワード:%1 at %2%2 の %1KDJobCanceledキャンセルしましたKDSaveFileAppend mode not supported.追記モードに対応していません。Read-only access not supported.読み込み専用でアクセスできませんでした。Could not backup existing file %1: %2既存のファイル %1 へバックアップできませんでした: %2TODOTODOKDUpdater::AppendFileOperationCannot backup file %1: %2ファイル %1 をバックアップできません: %2Invalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 22個Could not open file '%1' for writing: %2書き込み用にファイル '%1' を開けませんでした: %2Cannot find backup file for %1.%1 用のバックアップファイルが見つかりません。Could not restore backup file for %1.%1 用のバックアップファイルを復元できませんでした。Could not restore backup file for %1: %2%1 用のバックアップファイルを復元できませんでした: %2KDUpdater::CopyOperationCould not backup file %1.ファイル %1 をバックアップできませんでした。Invalid arguments: %1 arguments given, 2 expected.無効な引数: %1個の引数が渡されましたが、必要なのは2個です。Could not copy a non-existent file: %1存在しないファイルはコピーできません: %1Could not remove destination file %1: %2対象ファイル %1 を削除できませんでした: %2Could not copy %1 to %2: %3%1 を %2 にコピーできませんでした: %3Could not delete file %1: %2ファイル %1 を削除できませんでした: %2Could not restore backup file into %1: %2バックアップファイルを %1 へ復元できませんでした: %2KDUpdater::DeleteOperationCannot create backup of %1: %2%1 のバックアップを作成できません: %2Invalid arguments: %1 arguments given, 1 expected.無効な引数: %1個の引数が渡されましたが、必要なのは1個です。Cannot restore backup file for %1: %2%1 用のバックアップファイルを復元できません: %2KDUpdater::FileDownloaderDownload canceled.ダウンロードをキャンセルしました。Cryptographic hashes do not match.暗号学的ハッシュの値が合致しません。Download finished.ダウンロードが完了しました。 - unknown time remaining. - 残り時間: 不明。%1 of %2%1 / %2%1 downloaded.%1 ダウンロードしました。(%1/sec)(%1/秒)%n day(s), %n 日 %n hour(s), %n 時間 %n minute(s)%n 分 %n second(s)%n 秒 - %1%2%3%4 remaining.- 残り時間 %1%2%3%4。KDUpdater::HttpDownloaderCannot download %1: Writing to file '%2' failed: %3%1 をダウンロードできません: ファイル '%2' への書き込みに失敗しました: %3Cannot download %1: Could not create %2: %3%1 をダウンロードできません: %2 を作成できませんでした: %3%1 at %2%2 の %1Authentication request canceled.認証要求がキャンセルされました。Secure Connection Failed安全な接続ができませんでしたThere was an error during connection to: %1.%1 への接続中にエラーが発生しました。This could be a problem with the server's configuration, or it could be someone trying to impersonate the server.サーバーの設定に問題があるか、あるいはサーバーに成りすまそうとしているものがいるかもしれません。If you have connected to this server successfully in the past or trust this server, the error may be temporary and you can try again.以前にこのサーバーへの接続に成功しているかこのサーバが信頼できるのであれば、エラーは一時的なものである可能性があります。その場合、再試行してください。Try again再試行KDUpdater::LocalFileDownloaderCannot open source file '%1' for reading.読み込み用にソースファイル '%1' を開けません。Cannot open destination file '%1' for writing.書き込み用に対象ファイル '%1' を開けません。Writing to %1 failed: %2%1 への書き込みに失敗しました: %2KDUpdater::MkdirOperationInvalid arguments: %1 arguments given, 1 expected.無効な引数: %1個の引数が渡されましたが、必要なのは1個です。Could not create folder %1: Unknown error.フォルダー %1 を作成できませんでした: 未知のエラーです。Cannot remove directory %1: %2ディレクトリ %1 を削除できません: %2KDUpdater::MoveOperationCould not backup file %1.ファイル %1 をバックアップできませんでした。Invalid arguments: %1 arguments given, 2 expected.無効な引数: %1個の引数が渡されましたが、必要なのは2個です。Could not remove destination file %1: %2対象ファイル %1 を削除できませんでした: %2Could not copy %1 to %2: %3%1 を %2 にコピーできませんでした: %3Cannot copy %1 to %2: %3%1 を %2 にコピーできません: %3Cannot remove file %1.ファイル %1 を削除できません。Cannot restore backup file for %1: %2%1 用のバックアップファイルを復元できません: %2KDUpdater::PackagesInfo%1 contains invalid content: %2%1 に無効なコンテンツが含まれています: %2The file %1 does not exist.ファイル %1 が存在しません。Could not open %1.%1 を開けませんでした。Parse error in %1 at %2, %3: %4パースエラー %1 の%2行%3列: %4Root element %1 unexpected, should be 'Packages'.ルートエレメントに %1 は使用できません。'Packages'を使用してください。KDUpdater::PrependFileOperationCannot backup file %1: %2ファイル %1 をバックアップできません: %2Invalid arguments: %1 arguments given, 2 expected.無効な引数: %1個の引数が渡されましたが、必要なのは2個です。Could not open file %1 for reading: %2読み込み用にファイル %1 を開けませんでした: %2Could not open file %1 for writing: %2書き込み用にファイル %1 を開けませんでした: %2Cannot find backup file for %1.%1 用のバックアップファイルが見つかりません。Cannot restore backup file for %1.%1 用のバックアップファイルを復元できません。Cannot restore backup file for %1: %2%1 用のバックアップファイルを復元できません: %2KDUpdater::ResourceFileDownloaderCould not read resource file "%1". Reason:リソースファイル "%1" を読み込みできませんでした。理由:KDUpdater::RmdirOperationInvalid arguments: %1 arguments given, 1 expected.無効な引数: %1個の引数が渡されましたが、必要なのは1個です。Could not remove folder %1: The folder does not exist.フォルダー %1 を削除できませんでした: フォルダーが存在しません。Could not remove folder %1: %2フォルダー %1 を削除できませんでした: %2Cannot recreate directory %1: %2ディレクトリ %1 が再作成できません: %2KDUpdater::Task%1 started%1 を開始しました%1 cannot be stopped%1 は中止できませんCannot stop task %1タスク %1 は中止できません%1 cannot be paused%1 は一時停止できませんCannot pause task %1タスク %1 は一時停止できませんCannot resume task %1タスク %1 は再開できません%1 done%1 が終了しましたKDUpdater::UpdateFinderCould not access the package information of this application.このアプリケーションのパッケージ情報にアクセスできませんでした。Could not access the update sources information of this application.このアプリケーションの更新元情報にアクセスできませんでした。Downloading Updates.xml from update sources.更新元から Updates.xml をダウンロードしています。Could not download updates from %1 ('%2')%1('%2)から更新をダウンロードできませんでしたUpdates.xml file(s) downloaded from update sources.更新元から Updates.xml ファイルをダウンロードしました。Computing applicable updates.更新を適用しています。Application updates computed.アプリケーションに更新を適用しました。%n update(s) found.%n個の更新が見つかりました。KDUpdater::UpdateSourcesInfo%1 contains invalid content: %2%1 に無効なコンテンツが含まれています: %2Could not read "%1""%1" を読み込めませんでしたXML Parse error in %1 at %2, %3: %4XMLパースエラー %1 の%2行%3列: %4Root element %1 unexpected, should be "UpdateSources"ルートエレメントに %1 は使用できません。"UpdateSources"を使用してくださいCould not save changes to "%1": %2"%1" への変更を保存できませんでした: %2KDUpdater::UpdatesInfoDataCould not read "%1""%1" を読み込めませんでしたParse error in %1 at %2, %3: %4パースエラー %1 の%2行%3列: %4Updates.xml contains invalid content: %1Updates.xml に無効なコンテンツが含まれています: %1Root element %1 unexpected, should be "Updates".ルートエレメントに %1 は使用できません。"Updates"を使用してください。ApplicationName element is missing.ApplicationName エレメントがありません。ApplicationVersion element is missing.ApplicationVersion エレメントがありません。PackageUpdate element without NamePackageUpdate エレメントに Name がありませんPackageUpdate element without VersionPackageUpdate エレメントに Version がありませんPackageUpdate element without ReleaseDatePackageUpdate エレメントに ReleaseDate がありませんLib7z::ExtractItemJobCould not list archive: QIODevice not set or already destroyed.アーカイブからリストを取得できませんでした: QIODevice が設定されていないか、既に破棄されています。Lib7z::ListArchiveJobCould not list archive: QIODevice already destroyed.アーカイブからリストを取得できませんでした: QIODevice が既に破棄されています。QInstallerbytesバイトKiBKBMiBMBGiBGBTiBTBPiBPBEiBEBZiBZBYiBYBQInstaller::AddQtCreatorArrayValueOperationexactly 44個Invalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。 (group, arrayname, key, value)(グループ, 配列名, キー, 値)Needed installer object in %1 operation is empty.%1 のインストーラ作成に必要な操作が見つかりません。There is no value set for %1 on the installer object.インストーラの %1 用に値が設定されていません。QInstaller::ComponentCould not open the requested translation file '%1'.要求された翻訳ファイル '%1' を開けませんでした。Could not open the requested UI file '%1'. Error: %2要求された UI ファイル '%1' を開けませんでした。エラー: %2Could not load the requested UI file '%1'. Error: %2要求された UI ファイル '%1' をロードできませんでした。エラー: %2An error has occurred while reading the UI file.UI ファイルの読み込み中にエラーが発生しました。Could not open the requested license file '%1'. Error: %2要求されたライセンスファイル '%1' を開けませんでした。エラー: %2ErrorエラーError: Operation %1 does not existエラー: 操作 %1 は存在しませんUpdate Info: 更新情報: Cannot resolve isAutoDependOn in %1%1 の isAutoDependOn を解決できませんCannot resolve isDefault in %1%1 の isDefault を解決できませんQInstaller::ComponentModelComponent Nameコンポーネント名Installed Versionインストール済みバージョンNew Version新規バージョンSizeサイズRelease Dateリリース日QInstaller::ComponentSelectionPageAlt+Aselect default componentsAlt+ADef&aultデフォルト(&A)Alt+Rreset to already installed componentsAlt+R&Resetリセット(&R)Alt+Sselect all componentsAlt+S&Select Allすべてを選択(&S)Alt+Ddeselect all componentsAlt+D&Deselect Allすべての選択を解除(&D)This component will occupy approximately %1 on your hard disk drive.このコンポーネントはハードディスク上におよそ %1 必要とします。Select Componentsコンポーネントの選択Please select the components you want to update.更新したいコンポーネントを選択してください。Please select the components you want to install.インストールしたいコンポーネントを選択してください。Please select the components you want to uninstall.アンインストールしたいコンポーネントを選択してください。Select the components to install. Deselect installed components to uninstall them.インストールするコンポーネントを選択してください。インストール済みのコンポーネントをアンインストールする場合は選択を解除してください。QInstaller::ConsumeOutputOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。at least 2少なくとも2個Needed installer object in %1 operation is empty.%1 のインストーラ作成に必要な操作が見つかりません。Can not save the output of %1 to an empty installer key value.インストーラのキーの値が空のため、%1 の出力を保存できません。File '%1' does not exist or is not an executable binary.ファイル '%1' が存在しないか、実行可能なバイナリではありません。Running '%1' resulted in a crash.'%1' の実行中にクラッシュしました。QInstaller::CopyDirectoryOperation2 or 32あるいは3個Invalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。 (<source> <target> [forceOverwrite]) (<ソース> <ターゲット> [forceOverwrite])Invalid argument in %0: Third argument needs to be forceOverwrite, if specified%0 に無効な引数: 3番目の引数を指定する場合は "forceOverwrite" である必要がありますInvalid arguments in %0: Directories are invalid: %1 %2%0 に無効な引数: ディレクトリが無効です: %1 %2Could not create %0%0 を作成できませんでしたFailed to overwrite %1%1 に上書きできませんCould not copy %0 to %1, error was: %3%0 を %1 にコピーできませんでした。エラー: %3Could not remove %0%0 を削除できませんでしたQInstaller::CreateDesktopEntryOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 22個Failed to overwrite %1%1 に上書きできませんCould not write Desktop Entry at %1%1 へデスクトップエントリーを書き込むことができませんでしたQInstaller::CreateLinkOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 22個QInstaller::CreateLocalRepositoryOperationCould not set file permissions %1!ファイル %1 にアクセス権限を設定できませんでした!Could not move file %1 to %2. Error: %3ファイル %1 を %2 へ移動できませんでした。エラー: %3Invalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 22個Installer needs to be an offline version: %1.インストーラはオフラインバージョンである必要があります: %1Could not open file: %1ファイルを開けませんでした: %1Could not read: %1. Error: %2%1 を読み込みできませんでした。エラー: %2Could not open file: %1. Error: %2ファイル %1 を開けませんでした。エラー: %2Could not create target dir: %1.ターゲットディレクトリを作成できませんでした: %1Unknown exception caught: %1.未知の例外が発生しました: %1Removing file: %0ファイルを削除しています: %0Could not remove %0.%0 を削除できませんでした。Cannot remove directory %1: %2ディレクトリ %1 を削除できません: %2QInstaller::CreateShortcutOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。2 or 32あるいは3個 (optional: 'workingDirectory=...', 'iconPath=...', 'iconId=...') (オプション: 'workingDirectory=...', 'iconPath=...', 'iconId=...') Could not create folder %1: %2.フォルダー %1 を作成できませんでした: %2Could not create link %1: %2リンク %1 を作成できませんでした: %2QInstaller::DownloadArchivesJobCanceledキャンセルしましたDownloading hash signature failed.ハッシュ値のダウンロードに失敗しました。Download ErrorダウンロードエラーHash verification while downloading failed. This is a temporary error, please retry.ダウンロード中のハッシュ値の照合に失敗しました。これは一時的なエラーですので、再試行してください。Could not verify Hashハッシュ値の照合ができませんでしたCould not download archive: %1 : %2アーカイブ %1 をダウンロードできませんでした: %2Could not fetch archives: %1
Error while loading %2アーカイブを取得できませんでした: %1
%2 の読み込み中にエラーが発生しましたDownloading archive hash for component: %1コンポーネントのアーカイブハッシュのダウンロード中: %1Downloading archive for component: %1コンポーネントのアーカイブのダウンロード中: %1Scheme not supported: %1 (%2)このスキームはサポートしてません: %1 (%2)Could not find component for: %1.コンポーネント %1 を見つけることができませんでした。QInstaller::ElevatedExecuteOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。at least 1少なくとも1個Execution failed: Could not start detached: "%1"実行に失敗しました: "%1" をデタッチして起動できませんでしたExecution failed: Could not start: "%1"(%2)実行に失敗しました: "%1" を起動できませんでした (%2)Execution failed(Crash): "%1"実行に失敗しました(クラッシュ): "%1"Execution failed(Unexpected exit code: %1): "%2"実行に失敗しました(想定外の終了コード: %1): "%2"QInstaller::EnvironmentVariableOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。2 to 42から4個QInstaller::ExtractArchiveOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 22個QInstaller::ExtractArchiveOperation::RunnableCould not open %1 for reading: %2.読み込み用に %1 を開けませんでした: %2Error while extracting '%1': %2'%1' の展開中にエラーが発生しました: %2Unknown exception caught while extracting %1.%1 の展開中に未知の例外が発生しました。QInstaller::FinishedPageCompleting the %1 Wizard%1 のウィザードの完了Click Done to exit the %1 Wizard.%1 のウィザードを終了するには「完了」をクリックしてください。Click Finish to exit the %1 Wizard.%1 のウィザードを終了するには「完了」をクリックしてください。Restart再起動Run %1 now.%1 を実行中。The %1 Wizard failed.%1 のウィザードに失敗しました。QInstaller::GetRepositoryMetaInfoJobEmpty repository URL.リポジトリの URL が空です。Retrieving component meta information...コンポーネントのメタ情報を取得中...Invalid repository URL: %1無効なリポジトリ URL: %1URL scheme not supported: %1 (%2)この URL スキームはサポートしてません: %1 (%2)Could not move Updates.xml to target location. Error: %1Updates.xml をターゲットパスへ移動できませんでした。エラー: %1Could not open Updates.xml for reading. Error: %1読み込み用に Updates.xml を開けませんでした。エラー: %1Could not fetch a valid version of Updates.xml from repository: %1. Error: %2リポジトリ %1 から有効なバージョンの Updates.xml を取得することができませんでした。エラー: %2Download ErrorダウンロードエラーParsing component meta information...コンポーネントのメタ情報をパース中...Repository updates received.リポジトリの更新を取得しました。Finished updating component meta information.コンポーネントのメタ情報の更新が完了しました。Could not fetch Updates.xml from repository: %1. Error: %2リポジトリ %1 から Updates.xml を取得することができませんでした。エラー: %2Retrieving component information from remote repository...リモートのリポジトリからコンポーネントの情報を取得中...Could not open meta info archive: %1. Error: %2メタ情報アーカイブ %1 を開けませんでした。エラー: %2The hash of one component does not match the expected one.あるコンポーネントのハッシュ値が既定の値と合致しません。Bad hash.ハッシュ値が一致しません。Could not download meta information for component: %1. Error: %2コンポーネント %1 用のメタ情報をダウンロードできませんでした。エラー: %2QInstaller::GetRepositoryMetaInfoJob::ZipRunnableError while extracting '%1': %2'%1' の展開中にエラーが発生しました: %2Unknown exception caught while extracting %1.%1 の展開中に未知の例外が発生しました。Could not open %1 for reading. Error: %2読み込み用に %1 を開けませんでした。エラー: %2QInstaller::GlobalSettingsOperationSettings are not writable設定が書き込み可能ではありませんFailed to write settings設定の書き込みに失敗しましたInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。3 or 43あるいは4個QInstaller::InstallIconsOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。1 or 21あるいは2個 (Sourcepath, [Vendorprefix]) (ソースパス, [ベンダープレフィックス])QInstaller::IntroductionPageSetup - %1セットアップ - %1Welcome to the %1 Setup Wizard.%1 のセットアップウィザードへようこそ。QInstaller::LicenseAgreementPageLicense Agreementライセンス条項の同意Alt+Aagree licenseAlt+APlease read the following license agreement. You must accept the terms contained in this agreement before continuing with the installation.下記のライセンス条項をお読みください。本ライセンス条項に同意されない場合、インストールを継続することはできません。I accept the license.ライセンスに同意する。I do not accept the license.ライセンスに同意しない。Please read the following license agreements. You must accept the terms contained in these agreements before continuing with the installation.下記のライセンス条項をお読みください。これらのライセンス条項に同意されない場合、インストールを継続することはできません。I accept the licenses.ライセンスに同意する。I do not accept the licenses.ライセンスに同意しない。Alt+Ddo not agree licenseAlt+DQInstaller::LicenseOperationNo license files found to copy.コピーするライセンスファイルが見つかりませんでした。Needed installer object in %1 operation is empty.%1 のインストーラ作成に必要な操作が見つかりません。Can not write license file: %1.ライセンスファイルに書き込みできません: %1No license files found to delete.削除するライセンスファイルが見つかりませんでした。QInstaller::LineReplaceOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 33個QInstaller::MacReplaceInstallNamesOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。at least 3少なくとも3個One of the given arguments is empty. Argument1=%1; Argument2=%2, Argument3=%3与えられた引数のうち、少なくとも一つが空です。引数1=%1, 引数2=%2, 引数3=%3Cannot invoke otool. Is Xcode installed?otool を起動できません。Xcode はインストールされていますか?Cannot start process %0.プロセス %0 を起動できません。QInstaller::PackageManagerCoreError writing Uninstallerアンインストーラ書き込み中のエラー
Downloading packages...
パッケージのダウンロード中...Installation canceled by userユーザによってインストールがキャンセルされましたAll downloads finished.すべてのダウンロードが完了しました。ErrorエラーCancelling the InstallerインストーラのキャンセルAuthentication Error認証エラーSome components could not be removed completely because admin rights could not be acquired: %1.管理者権限が取得できなかったため、いくつかのコンポーネントを完全に削除することができませんでした: %1Unknown error.未知のエラー。Some components could not be removed completely because an unknown error happened.未知のエラーが発生したため、いくつかのコンポーネントを完全に削除することができませんでした。Application not running in Package Manager mode!アプリケーションがパッケージマネージャモードで動作していません!No installed packages found.インストールされたパッケージが見つかりません。Application running in Uninstaller mode!アプリケーションはアンインストーラモードで実行中です!invalid無効There is an important update available, please run the updater first.重要な更新が利用可能です。先にアップデータを実行してください。QInstaller::PackageManagerCorePrivateErrorエラーComponent(s) added as automatic dependencies自動的な依存関係の解決により追加されたコンポーネントAdded as dependency for %1.%1 が依存しているために追加されました。Component(s) that have resolved Dependencies依存関係を解決したコンポーネントSelected Component(s) without Dependencies選択されたコンポーネントは依存関係がありませんAccess errorアクセスエラーFormat errorフォーマットエラーCould not write installer configuration to %1: %2インストーラの設定を %1 に書き込めませんでした: %2Stop Processesプロセスの停止These processes should be stopped to continue:
%1続行するには次のアプリケーションを終了してください:
%1Installation canceled by userユーザによってインストールがキャンセルされましたWriting uninstaller.アンインストーラを書き込んでいます。Uninstaller is not a bundleアンインストーラがバンドル構造ではありませんCould not write uninstaller data to %1: %2アンインストーラのデータを %1 に書き込めませんでした: %2Could not write uninstaller to %1: %2アンインストーラを %1 に書き込めませんでした: %2Found a binary data file, but we are the installer and we should read the binary resource from our very own binary!バイナリデータファイルを発見しました。しかし、インストーラはその内部データからバイナリリソースを読み込むべきです!Could not write uninstaller binary data to %1: %2アンインストーラのバイナリデータを %1 に書き込めませんでした: %2ProductName should be setProductName を設定してくださいVariable 'TargetDir' not set.'TargetDir' 変数がセットされていません。Preparing the installation...インストールの準備中...It is not possible to install from network locationネットワークからインストールできませんCreating local repositoryローカルのリポジトリを作成していますCreating Uninstallerアンインストーラを作成しています
Installation finished!
インストールが完了しました!
Installation aborted!
インストールが中断されました!It is not possible to run that operation from a network locationネットーワーク上からこの操作を実行することはできませんRemoving deselected components...選択解除したコンポーネントを削除中...
Update finished!
アップデートが完了しました!
Update aborted!
アップデートが中断されました!
Uninstallation completed successfully!
アンインストールに成功しました!
Uninstallation aborted!
アンインストールが中断されました!
Installing component %1
コンポーネントのインストール中: %1Installer ErrorインストーラエラーError during installation process (%1):
%2インストール(%1)中にエラーが発生しました: (%2)Cannot prepare uninstallアンインストールの準備ができませんCannot start uninstallアンインストールを開始できませんError during uninstallation process:
%1アンインストール中にエラーが発生しました: %1Unknown error未知のエラーCould not retrieve remote tree: %1.リモートのツリーを取得できませんでした: %1Failure to read packages from: %1.右記からのパッケージの読み込みに失敗しました: %1Could not retrieve meta information: %1メタ情報を取得できませんでした: %1Could not add temporary update source information.一時的な更新元情報を追加できませんでした。Could not find any update source information.更新元情報が見つかりませんでした。QInstaller::PackageManagerGui%1 Setup%1のセットアップMaintain %1%1のメンテナンスQuestion確認Do you want to abort the %1 process?プロセス %1 を中断しますか?uninstallationアンインストールinstallationインストールinstallerインストーラuninstallerアンインストーラmaintenanceメンテナンスDo you want to quit the %1 application?アプリケーション %1 を終了しますか?Settings設定ErrorエラーIt is not possible to install from network location.
Please copy the installer to a local driveネットワーク上からのインストールができません。
インストーラをローカルドライブにコピーしてくださいQInstaller::PerformInstallationForm&Show Details詳細を表示する(&S)&Hide Details詳細を隠す(&H)QInstaller::PerformInstallationPageUninstalling %1%1のアンインストール&Update更新(&U)Updating components of %1%1のコンポーネントの更新&Installインストール(&I)Installing %1%1のインストールU&ninstallアンインストール(&N)QInstaller::QtPatchOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。3 or 43あるいは4個Needed installer object in "%1" operation is empty."%1" のインストーラ作成に必要な操作が見つかりません。First argument should be 'linux', 'mac' or 'windows'. No other type is supported at this time.最初の引数は 'linux', 'mac', 'windows' のいずれかを指定してください。それ以外はサポートしていません。Could not find the needed QmakeOutputInstallerKey(%1) value on the installer object. The ConsumeOutput operation on the valid qmake needs to be called first.インストーラに必要な QmakeOutputInstallerKey(%1) の値を見つけることができませんでした。適切な qmake で ConsumeOutput 操作を最初に実行する必要があります。QMake from the current Qt version
(%1)is not existing. Please file a bugreport with this dialog at https://bugreports.qt-project.org.現在の Qt のバージョン(%1)の QMake が見つかりません。このダイアログから https://bugreports.qt-project.org へバグ報告をしてください。The output of
%1 -query
is not parseable. Please file a bugreport with this dialog https://bugreports.qt-project.org.
output: "%2"以下の出力がパースできません。
%1 -query
このダイアログから https://bugreports.qt-project.org へバグ報告をしてください。
出力: "%2"Qt patch error: new Qt dir(%1)
needs to be less than 255 characters.Qt パッチエラー: 新しい Qt のパス(%1)
は255文字以下である必要があります。Qt patch error: Can not open %1.(%2)Qt パッチエラー: %1 を開けません。(%2)The installer was not able to get the unpatched path from
%1.(maybe it is broken or removed)
It tried to patch the Qt binaries, but all other files in Qt are unpatched.
This could result in a broken Qt version.
Sometimes it helps to restart the installer with a switched off antivirus software.インストーラはパッチ未適用時のパスを %1 から取得できませんでした。
(おそらくファイルが壊れているか削除されています)
Qt のバイナリにパッチを適用しようとしましたが、Qt の他のすべてのファイルに対してパッチは適用されていません。
このため、この Qt は正常な状態に無い可能性があります。
アンチウィルスソフトウェアをオフにしてインストーラを再起動することによって改善されるかもしれません。QInstaller::ReadyForInstallationPage&Show Details詳細を表示する(&S)U&ninstallアンインストール(&N)Ready to Uninstallアンインストールの準備完了Setup is now ready to begin removing %1 from your computer.<br><font color="red">The program directory %2 will be deleted completely</font>, including all content in that directory!このコンピュータから %1 を削除する準備ができました。<br><font color="red">このプログラムがインストールされていたディレクトリ %2 は完全に削除されます</font>。ディレクトリの内容すべてが削除の対象です!U&pdate更新(&P)Ready to Update Packagesパッケージ更新の準備完了Setup is now ready to begin updating your installation.インストール済みパッケージを更新する準備ができました。&Installインストール(&I)Ready to Installインストールの準備完了Setup is now ready to begin installing %1 on your computer.このコンピュータに %1 をインストールする準備ができました。Not enough disk space to store temporary files and the installation! Available space: %1, at least required %2.ディスクの空き容量が不足しているため、一時ファイルの作成およびインストールができません! 必要な容量 %2 に対して、空き容量は %1 です。Not enough disk space to store all selected components! Available space: %1, at least required: %2.ディスクの空き容量が不足しているため、選択されたすべてのコンポーネントをインストールできません! 必要な容量 %2 に対して、空き容量は %1 です。Not enough disk space to store temporary files! Available space: %1, at least required: %2.ディスクの空き容量が不足しているため、一時ファイルが作成できません! 必要な容量 %2 に対して、空き容量は %1 です。The volume you selected for installation seems to have sufficient space for installation, but there will be less than 1% of the volume's space available afterwards. %1指定されたディスクの空き容量はインストール可能なレベルだと思われますが、インストール後の空き容量は 1% 以下となる見込みです:。 %1The volume you selected for installation seems to have sufficient space for installation, but there will be less than 100 MB available afterwards. %1指定されたディスクの空き容量はインストール可能なレベルだと思われますが、インストール後の空き容量は 100 MB 以下となる見込みです:。 %1Can not resolve all dependencies!すべての依存関係を解決できません!Components about to be removed.削除されるコンポーネント。&Hide Details詳細を隠す(&H)QInstaller::RegisterFileTypeOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。2 to 52から5個Register File Type: Invalid argumentsファイル形式の登録: 無効な引数QInstaller::ReplaceOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 33個QInstaller::RestartPageCompleting the %1 Setup Wizard%1 のセットアップウィザードを完了しましたQInstaller::ScriptEngineCould not open the requested script file at %1: %2.要求されたスクリプトファイル %1 を開けませんでした: %2Exception while loading the component script: '%1'コンポーネントスクリプトのロード中に例外が発生しました: '%1'Could not load the component script inside a script context: '%1'コンポーネントスクリプトのコンテキストが正しくロードできませんでした: '%1'Fatal error while evaluating a script.スクリプトの評価中に致命的なエラーが発生しました。QInstaller::SelfRestartOperationInstaller object needed in '%1' operation is empty.'%1' のインストーラ作成に必要な操作が見つかりません。Self Restart: Only valid within updater or packagemanager mode.自己再起動: アップデータあるいはパッケージマネージャモードでのみ有効です。Self Restart: Invalid arguments自己再起動: 無効な引数QInstaller::SetQtCreatorValueOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 44個 (rootInstallPath, group, key, value) (ルートインストールパス, グループ, キー, 値)Needed installer object in "%1" operation is empty."%1" のインストーラ作成に必要な操作が見つかりません。There is no value set for '%1' on the installer object.インストーラの %1 用に値が設定されていません。Needed installer object in '%1' operation is empty.'%1' のインストーラ作成に必要な操作が見つかりません。QInstaller::SettingsOperationMissing argument(s) '%1' calling '%2' with arguments '%3'.'%2' を引数 '%3' で呼び出しましたが、'%1' の引数が不足しています。Current method argument calling '%1' with arguments '%2' is not supported. Please use set, remove, add_array_value or remove_array_value.'%1' の呼び出し時に method 引数の値として '%2' はサポートされていません。set, remove, add_array_value, remove_array_value を使用してください。QInstaller::SimpleMoveFileOperationInvalid arguments in %0: %1 arguments given, %2 expected%3.%0 に無効な引数: %1個の引数が渡されましたが、必要なのは%2です%3。exactly 22個None of the arguments can be empty: source '%1', target '%2'.どちらの引数も空にはできません: ソース '%1', ターゲット: '%2'Can not move source '%1' to target '%2', because target exists and is not removable.ソース '%1' をターゲット '%2' に移動できません。ターゲットが存在しており、かつ削除できません。Can not move source '%1' to target '%2': %3ソース '%1' をターゲット '%2' に移動できません: %3Move '%1' to '%2'.'%1' を '%2' へ移動。QInstaller::StartMenuDirectoryPageStart Menu shortcutsスタートメニューのショートカットSelect the Start Menu in which you would like to create the program's shortcuts. You can also enter a name to create a new folder.プログラムへのショートカットを作成したいスタートメニューを選択してください。新規作成するフォルダ名を入力することもできます。QInstaller::TargetDirectoryPageInstallation Folderインストール先フォルダPlease specify the folder where %1 will be installed.%1 をインストールするフォルダを指定してください。Alt+Rbrowse file system to choose a fileAlt+RB&rowse...参照(&B)...ErrorエラーThe install directory cannot be empty, please specify a valid folder.インストールディレクトリが殻にできません。有効なフォルダを指定してください。As the install directory is completely deleted on uninstall, installing in %1 is forbidden.インストールディレクトリはアンインストール時に完全に削除されるため、%1 へのインストールは許可できません。Warning警告You have selected an existing, non-empty folder for installation. Note that it will be completely wiped on uninstallation of this application. It is not advisable to install into this folder as installation might fail. Do you want to continue?インストール先に既存の空ではないフォルダが選択されています。このフォルダはアプリケーションのアンインストール時に完全に消去されることに注意してください。インストールに失敗する可能性もあるため、このフォルダへのインストールは推奨されません。インストールを継続しますか?Select Installation Folderインストール先フォルダの選択QInstaller::TestRepositoryEmpty repository URL.リポジトリの URL が空です。URL scheme not supported: %1 (%2).この URL スキームはサポートしてません: %1 (%2)Got a timeout while testing: '%1'テスト中にタイムアウトが発生しました: '%1'Could not parse Updates.xml! Error: %1.Updates.xml を解析できませんでした! エラー: %1Updates.xml could not be opened for reading!読み込み用に Updates.xml を開けませんでした!Updates.xml could not be found on server!サーバ上に Updates.xml が見つかりませんでした!QInstallerCreator::ArchiveCould not create %1: %2%1 を作成できませんでした: %2Could not open archive file %1 for reading.読み込み用にアーカイブファイル %1 を開けませんでした。Could not create archive from %1: Not a file.%1 からアーカイブを作成できませんでした: ファイルではありません。Error while packing directory at %1%1 でディレクトリのパック中にエラーが発生しましたQObjectNo marker found, stopped after %1.マーカーが見つからなかったため、%1 で停止しました。Cannot create zipped file for path %1: %2%1 に ZIP ファイルを作成できませんでした: %2Could not seek to in-binary resource. (offset: %1, length: %2)バイナリリソースをシークできませんでした。 (オフセット: %1, 長さ: %2)Could not register in-binary resource.バイナリリソースに登録できませんでした。Could not open binary %1: %2バイナリ %1 を開けませんでした: %2Could not seek to binary layout section.バイナリレイアウトセクションへシークできませんでした。Could not seek to metadata index.メタデータインデックスへシークできませんでした。Could not seek to operation list.オペレーションリストへシークできませんでした。Could not seek to component index information.コンポーネントインデックス情報へシークできませんでした。Could not seek to component index.コンポーネントインデックスへシークできませんでした。Cannot open file %1 for reading: %2読み込み用にファイル %1 を開けませんでした: %2Cannot open file %1 for writing: %2書き込み用にファイル %1 を開けませんでした: %2Write failed after %1 bytes: %2%1 バイトの書き込み後にエラーが発生しました: %2Read failed after %1 bytes: %2%1 バイトの読み込み後にエラーが発生しました: %2Could not remove file %1: %2ファイル %1 を削除できませんでした: %2Could not remove folder %1: %2フォルダー %1 を削除できませんでした: %2Could not create folder %1フォルダー %1 を作成できませんでしたCould not copy file from %1 to %2: %3ファイル %1 を %2 にコピーできませんでした。エラー: %3Could not move file from %1 to %2: %3ファイル %1 を %2 へ移動できませんでした: %3Could not create folder %1: %2フォルダー %1 を作成できませんでした: %2Could not open temporary file: %1一時ファイル %1 を開けませんでしたCould not open temporary file for template %1: %2テンプレート %1 用の一時ファイルを開けませんでした: %2Could not create lock file %1: %2ロックファイル %1 を作成できませんでした: %2Could not write PID to lock file %1: %2ロックファイル %1 に PID を書き込めませんでした: %2Could not lock lock file %1: %2ロックファイル %1 をロックできませんでした: %2Could not unlock lock file %1: %2ロックファイル %1 をアンロックできませんでした: %2Path exists but is not a folder: %1パスが存在していますが、フォルダーではありません: %1Could not create folder: %1フォルダーを作成できませんでした: %1Could not create temporary file一時ファイルを作成できませんでしたCould not retrieve property %1 for item %2アイテム %2 からプロパティ %1 を取得できませんでしたProperty %1 for item %2 not of type VT_FILETIME but %3アイテム %2 のプロパティ %1 の型が VT_FILETIME ではなく %3 になっていますCould not convert file time to local timeファイルの時刻をローカルタイムに変換できませんでしたCould not convert local file time to system timeローカルファイルの時刻をシステムの時刻へ変換できませんでしたNo device set for output streamストリームを出力するデバイスが指定されていませんCould not load codecsコーデックをロードできませんでしたCould not retrieve default formatデフォルトフォーマットを取得できませんでしたCould not open archiveアーカイブを開けませんでしたNo CArc foundCArc が見つかりませんCould not retrieve number of items in archiveアーカイブ内のアイテム数が取得できませんでしたCould not retrieve path of archive item %1アーカイブアイテム %1 のパスが取得できませんでしたUnknown exception caught (%1)未知の例外が発生しました (%1)Failed失敗Could not remove already existing symlink. %1すでに存在するシンボリックリンクは削除できません: %1Could not open file: %1 (%2)ファイルが開けません: %1 (%2)Could not create symlink at '%1'. Another one is already existing.'%1' にシンボリックリンクを作成できませんでした。他のリンクがすでに存在します。Could not read symlink target from file '%1'.シンボリックリンクの参照先のファイル '%1' を読み込み用に開けませんでした。Could not create symlink at %1. %2%1 にシンボリックリンクを作成できませんでした: %2internal code: %1内部コード: %1not enough memoryメモリが不足していますError: %1エラー: %1Could not create archive %1. %2アーカイブ %1 が作成できませんでした: %2Error while extracting '%1': %2'%1' の展開中にエラーが発生しました: %2CArc index %1 out of bounds [0, %2]CArc のインデックス %1 が範囲外です [0, %2]Item index %1 out of bounds [0, %2]アイテムのインデックス %1 が範囲外です [0, %2]Could not create output file for writing: %1書き込み用に出力ファイルを作成できませんでした: %1Authorization required認証要求Enter your password to authorize for sudo:sudo の認証用にパスワードを入力してください:Error acquiring admin rights管理者権限の取得中にエラーが発生しましたCould not backup file %1ファイル %1 をバックアップできませんでしたCould not delete file %1ファイル %1 を削除できませんでしたCould not restore backup file into %1バックアップファイルを %1 へ復元できませんでしたFailed to overwrite %1: %2%1 に上書きできません: %2Registry path %1 is not writableレジストリのパス %1 に書き込みできませんCould not write to registry path %1レジストリパス %1 へ書き込めませんでしたInvalid Argument: source folder must not be empty.無効な引数: ソースフォルダが空ではいけません。Could not backup file %1: %2ファイル %1 をバックアップできませんでした: %2Failed to copy file %1: %2ファイル %1 へのコピーに失敗しました: %2Could not create folder at %1: %2%1 にフォルダーを作成できませんでした: %2Invalid arguments: %1 arguments given, %2 to %3 expected.無効な引数: %1個の引数が渡されましたが、必要なのは%2から%3個以内です。Invalid arguments: %1 arguments given, %2 expected.無効な引数: %1個の引数が渡されましたが、必要なのは%2個です。Error while elevating access rights.アクセス権限の昇格中にエラーが発生しました。Failed to seek in file %1: %2ファイル %1 のシークに失敗しました: %2Failed to open %1 for reading読み込み用に %1 を開くのに失敗しましたFailed to open %1 for writing書き込み用に %1 を開くのに失敗しましたCould not create link from %1 to %2.%1 から %2 へのリンクを作成できませんでした。Could not remove link from %1 to %2.%1 から %2 へのリンクを削除できませんでした。Authorization Error認証エラーRegistering file types is only supported on Windows.ファイル形式の登録は Windows でのみサポートしています。Failed to open '%1' for reading.読み込み用に '%1' を開くのに失敗しました。Failed to open '%1' for writing.書き込み用に '%1' を開くのに失敗しました。Number of arguments does not match: one is required引数の数が一致しません: 一つのみ指定してくださいCould not get package manager core.パッケージマネージャのコアを取得できません。This process should be stopped before continuing: %1続行するにはこのプロセスを終了してください: %1These processes should be stopped before continuing: %1続行するにはこれらのプロセスを終了してください: %1Could not create temporary directory at %1: %2テンプレート用の一時ディレクトリを %1 に作成できませんでした: %2Could not create temporary directory at %1: unknown errorテンプレート用の一時フォルダを %1 に作成できませんでした: 未知のエラーCould not get authorization.認証することができませんでした。Could not get authorization that is needed for continuing the installation.
Either abort the installation or use the fallback solution by running
%1
as root and then clicking ok.インストールの継続に必要な認証を行うことができませんでした。
インストールを「中止」するか、別の手段として root で
%1
を実行した後に「OK」をクリックしてください。Failed to seek in file %1. Reason: %2.ファイル %1 のシークに失敗しました: %2SettingsCould not open settings file %1 for reading: %2読み込み用に設定ファイル %1 を開けませんでした: %2SettingsDialogSettings設定NetworkネットワークNo proxyプロキシを使用しないSystem proxy settingsシステムのプロキシ設定を使用するManual proxy configuration手動でプロキシを設定するHTTP proxy:HTTP プロキシ:Port:ポート:HTTP proxy requires authenticationHTTP プロキシで認証が必要Username:ユーザ名:Password:パスワード:FTP proxy:FTP プロキシ:FTP proxy requires authenticationFTP プロキシで認証が必要RepositoriesリポジトリAdd Username and Password for authentication if needed.認証が必要な場合はユーザ名とパスワードを記述してください。Use temporary repositories only一時リポジトリのみを使用するAdd追加Remove削除TestテストShow Passwordsパスワードを表示するCheck this to use repository during fetch.このリポジトリの内容を取得する場合はチェックしてください。Add the username to authenticate on the server.サーバでの認証用ユーザ名を追加してください。Add the password to authenticate on the server.サーバでの認証用パスワードを追加してください。The servers URL that contains a valid repository.有効なリポジトリを含むサーバのURLです。There was an error testing this repository.このリポジトリのテスト中にエラーが発生しました。Do you want to disable the tested repository?このテスト済みリポジトリを無効にしますか?Hide Passwordsパスワードを隠すUse利用Usernameユーザ名PasswordパスワードRepositoryリポジトリDefault repositoriesデフォルトリポジトリTemporary repositories一時リポジトリUser defined repositoriesユーザ定義リポジトリIntroductionPageImplPackage managerパッケージマネージャUpdate componentsコンポーネントの更新Remove all componentsすべてのコンポーネントの削除Retrieving information from remote installation sources...リモートのインストール元から情報を取得しています...At least one valid and enabled repository required for this action to succeed.このアクションの実行にはひとつ以上の有効なリポジトリが必要です。No updates available.新しい更新はありません。 Only local package management available. ローカルのパッケージ管理のみ利用できます。Quit終了TargetDirectoryPageImplThe installation path cannot be empty, please specify a valid folder.インストール先のパスは空にできません。有効なフォルダを指定してください。The installation path cannot be relative, please specify an absolute path.インストール先のパスに相対パスは使用できません。絶対パスで指定してください。The path you have entered is too long, please make sure to specify a valid path.入力したパスが長すぎます。有効なパスかどうか確認してください。The path you have entered is not valid, please make sure to specify a valid drive.入力したパスは無効です。有効なドライブかどうか確認してください。The installation path must not contain %1, please specify a valid folder.インストール先のパスに %1 は使用できません。有効なフォルダを指定してください。The path or installation directory contains non ASCII characters. This is currently not supported! Please choose a different path or installation directory.インストール先のディレクトリあるいはそれまでのパスに非 ASCII 文字が含まれています。そのようなパスへのインストールはサポートされていません。別のディレクトリあるいはパスを選択してください。Warning警告ErrorエラーAs the install directory is completely deleted installing in %1 is forbidden.インストールしたディレクトリはアンインストール時に完全に削除されるため、%1 へのインストールは許可できません。The folder you selected already exists and contains an installation. Choose a different target for installation.選択されたフォルダは既に存在し、インストール済みです。他のインストール先を選択してください。You have selected an existing, non-empty folder for installation.
Note that it will be completely wiped on uninstallation of this application.
It is not advisable to install into this folder as installation might fail.
Do you want to continue?既存の空ではないフォルダをインストール先に選択しました。
このアプリケーションをアンインストールする時にはこのフォルダすべてが消去されることに注意してください。
このフォルダへのインストールは失敗する可能性もあり推奨されません。
インストールを継続しますか?You have selected an existing file or symlink, please choose a different target for installation.既存のファイルあるいはシンボリックリンクを選択しました。他のインストール先を選択してください。