AuthenticationRequiredException
%1 at %2
Proxy requires authentication.
BinaryContent
Could not seek to %1 to read the operation data.
Could not seek to %1 to read the resource collection block.
Could not open meta resource. Error: %1
BinaryLayout
Could not seek to %1 to read the embedded meta data count.
Could not seek to %1 to read the resource collection segment.
Unexpected mismatch of meta resources. Read %1, expected: %2.
Dialog
Http authentication required
You need to supply a Username and Password to access this site.
Username:
Password:
%1 at %2
DirectoryGuard
Path exists but is not a folder: %1
Could not create folder: %1
ExtractCallbackImpl
Could not retrieve path of archive item %1
Could not remove already existing symlink. %1
Could not open file: %1 (%2)
Could not create symlink at '%1'. Another one is already existing.
Could not read symlink target from file '%1'.
Could not create symlink at %1. %2
InstallerCalculator
Components added as automatic dependencies:
Components added as dependency for '%1':
Components that have resolved dependencies:
Selected components without dependencies:
Recursion detected, component '%1' already added with reason: '%2'
Cannot find missing dependency '%1' for '%2'.
KDJob
Canceled
KDLockFile
Could not create lock file '%1': %2
Could not write PID to lock file '%1': %2
Could not obtain the lock for file '%1': %2
Could not release the lock for file '%1': %2
KDUpdater::AppendFileOperation
Cannot backup file %1: %2
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 2
Could not open file '%1' for writing: %2
Cannot find backup file for %1.
Could not restore backup file for %1.
Could not restore backup file for %1: %2
KDUpdater::CopyOperation
Could not backup file %1.
Invalid arguments: %1 arguments given, 2 expected.
Could not copy a non-existent file: %1
Could not remove destination file %1: %2
Could not copy %1 to %2: %3
Could not delete file %1: %2
Could not restore backup file into %1: %2
KDUpdater::DeleteOperation
Cannot create backup of %1: %2
Invalid arguments: %1 arguments given, 1 expected.
Cannot restore backup file for %1: %2
KDUpdater::FileDownloader
Download finished.
Cryptographic hashes do not match.
Download canceled.
%1 of %2
%1 downloaded.
(%1/sec)
%n day(s),
%n hour(s),
%n minute(s)
%n second(s)
- %1%2%3%4 remaining.
- unknown time remaining.
KDUpdater::HttpDownloader
Cannot download %1: Writing to file '%2' failed: %3
Cannot download %1: Could not create %2: %3
%1 at %2
Authentication request canceled.
Secure Connection Failed
There was an error during connection to: %1.
This could be a problem with the server's configuration, or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past or trust this server, the error may be temporary and you can try again.
Try again
KDUpdater::LocalFileDownloader
Cannot open source file '%1' for reading.
Cannot open destination file '%1' for writing.
Writing to %1 failed: %2
KDUpdater::MkdirOperation
Invalid arguments: %1 arguments given, 1 expected.
Could not create folder %1: Unknown error.
Cannot remove directory %1: %2
KDUpdater::MoveOperation
Could not backup file %1.
Invalid arguments: %1 arguments given, 2 expected.
Could not remove destination file %1: %2
Could not copy %1 to %2: %3
Cannot copy %1 to %2: %3
Cannot remove file %1.
Cannot restore backup file for %1: %2
KDUpdater::PackagesInfo
%1 contains invalid content: %2
The file %1 does not exist.
Could not open %1.
Parse error in %1 at %2, %3: %4
Root element %1 unexpected, should be 'Packages'.
KDUpdater::PrependFileOperation
Cannot backup file %1: %2
Invalid arguments: %1 arguments given, 2 expected.
Could not open file %1 for reading: %2
Could not open file %1 for writing: %2
Cannot find backup file for %1.
Cannot restore backup file for %1.
Cannot restore backup file for %1: %2
KDUpdater::ResourceFileDownloader
Could not read resource file "%1". Reason:
KDUpdater::RmdirOperation
Invalid arguments: %1 arguments given, 1 expected.
Could not remove folder %1: The folder does not exist.
Could not remove folder %1: %2
Cannot recreate directory %1: %2
KDUpdater::Task
%1 started
%1 cannot be stopped
Cannot stop task %1
%1 cannot be paused
Cannot pause task %1
Cannot resume task %1
%1 done
KDUpdater::UpdateFinder
Could not access the package information of this application.
Could not access the update sources information of this application.
%n update(s) found.
Downloading Updates.xml from update sources.
Could not download update source %1 from ('%2')
Updates.xml file(s) downloaded from update sources.
Computing applicable updates.
Application updates computed.
KDUpdater::UpdateSourcesInfo
%1 contains invalid content: %2
Could not read "%1"
XML Parse error in %1 at %2, %3: %4
Root element %1 unexpected, should be "UpdateSources"
Could not save changes to "%1": %2
KDUpdater::UpdatesInfoData
Updates.xml contains invalid content: %1
Could not read "%1"
Parse error in %1 at %2, %3: %4
Root element %1 unexpected, should be "Updates".
ApplicationName element is missing.
ApplicationVersion element is missing.
PackageUpdate element without Name
PackageUpdate element without Version
PackageUpdate element without ReleaseDate
Lib7z
Could not retrieve number of items in archive
Could not retrieve path of archive item %1
Unknown exception caught (%1)
internal code: %1
not enough memory
Error: %1
Could not load codecs
Could not retrieve default format
Could not create archive %1. %2
CArc index %1 out of bounds [0, %2]
Item index %1 out of bounds [0, %2]
Could not create output file for writing: %1
Lib7z::ExtractItemJob
Could not list archive: QIODevice not set or already destroyed.
Error while extracting '%1': %2
Unknown exception caught (%1)
Failed
Lib7z::ListArchiveJob
Could not list archive: QIODevice already destroyed.
Unknown exception caught (%1)
Failed
OpenArchiveInfo
Could not load codecs
Could not retrieve default format
Could not open archive
No CArc found
QIODeviceSequentialOutStream
No device set for output stream
QInstaller
No marker found, stopped after %1.
Cannot open file %1 for reading: %2
Cannot open file %1 for writing: %2
Read failed after %1 bytes: %2
Copy failed. Error: %1
Write failed after %1 bytes: %2
bytes
KiB
MiB
GiB
TiB
PiB
EiB
ZiB
YiB
Could not remove file %1: %2
Could not remove folder %1: %2
Could not create folder %1
Could not copy file from %1 to %2: %3
Could not move file from %1 to %2: %3
Could not create folder %1: %2
Could not open temporary file: %1
Could not open temporary file for template %1: %2
Could not create temporary file
Could not retrieve property %1 for item %2
Property %1 for item %2 not of type VT_FILETIME but %3
Could not convert file time to local time
Could not convert local file time to system time
Corrupt installation
Your installation seems to be corrupted. Please consider re-installing from scratch.
The specified module could not be found.
QInstaller::Component
Components cannot have children in updater mode.
Could not open the requested translation file '%1'.
Could not open the requested UI file '%1'. Error: %2
Could not load the requested UI file '%1'. Error: %2
Could not open the requested license file '%1'. Error: %2
Error
Error: Operation %1 does not exist
Cannot resolve isDefault in %1
Update Info:
QInstaller::ComponentModel
Component is marked for installation.
Component is marked for uninstallation.
Component is installed.
Component is not installed.
Component Name
Action
Installed Version
New Version
Release Date
Size
QInstaller::ComponentSelectionPage
Alt+A
select default components
Def&ault
Alt+R
reset to already installed components
&Reset
Alt+S
select all components
&Select All
Alt+D
deselect all components
&Deselect All
This component will occupy approximately %1 on your hard disk drive.
Select Components
Please select the components you want to update.
Please select the components you want to install.
Please select the components you want to uninstall.
Select the components to install. Deselect installed components to uninstall them.
QInstaller::ConsumeOutputOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
at least 2
Needed installer object in %1 operation is empty.
Can not save the output of %1 to an empty installer key value.
File '%1' does not exist or is not an executable binary.
Running '%1' resulted in a crash.
QInstaller::CopyDirectoryOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
2 or 3
(<source> <target> [forceOverwrite])
Invalid argument in %0: Third argument needs to be forceOverwrite, if specified
Invalid arguments in %0: Directories are invalid: %1 %2
Could not create %0
Failed to overwrite %1
Could not copy %0 to %1, error was: %3
Could not remove %0
QInstaller::CopyFileTask
Invalid task item count.
Could not open source '%1' for read. Error: %2.
Could not open target '%1' for write. Error: %2.
Writing to target '%1' failed. Error: %2.
QInstaller::CreateDesktopEntryOperation
Could not backup file %1: %2
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 2
Failed to overwrite %1
Could not write Desktop Entry at %1
QInstaller::CreateLinkOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 2
Could not create link from %1 to %2.
Could not remove link from %1 to %2.
QInstaller::CreateLocalRepositoryOperation
Could not set file permissions %1!
Could not remove file %1: %2
Could not move file %1 to %2. Error: %3
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 2
Installer needs to be an offline version: %1.
Could not open file: %1
Could not read: %1. Error: %2
Could not open file: %1. Error: %2
Could not create target dir: %1.
Unknown exception caught: %1.
Removing file: %0
Could not remove %0.
Cannot remove directory %1: %2
QInstaller::CreateShortcutOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
2 or 3
(optional: 'workingDirectory=...', 'iconPath=...', 'iconId=...')
Could not create folder %1: %2.
Failed to overwrite %1: %2
Could not create link %1: %2
QInstaller::DownloadArchivesJob
Canceled
Downloading hash signature failed.
Download Error
Hash verification while downloading failed. This is a temporary error, please retry.
Could not verify Hash
Could not download archive: %1 : %2
Could not fetch archives: %1
Error while loading %2
Downloading archive '%1' for component: %2
Scheme not supported: %1 (%2)
Could not find component for: %1.
QInstaller::Downloader
Target '%1' not open for write. Error: %2.
%2 is a sentence describing the error.
Writing to target '%1' failed. Error: %2.
%2 is a sentence describing the error.
Redirect loop detected '%1'.
Checksum mismatch detected '%1'.
Network error while downloading '%1': %2.
%2 is a sentence describing the error
Unknown network error while downloading: %1.
%1 is a sentence describing the error
Pause and resume not supported by network transfers.
Invalid source '%1'. Error: %2.
%2 is a sentence describing the error
Target file '%1' already exists but is not a file.
Could not open target '%1' for write. Error: %2.
%2 is a sentence describing the error
QInstaller::ElevatedExecuteOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
at least 1
Execution failed: Could not start detached: "%1"
Execution failed: Could not start: "%1"(%2)
Execution failed(Crash): "%1"
Execution failed(Unexpected exit code: %1): "%2"
QInstaller::EnvironmentVariableOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
2 to 4
QInstaller::ExtractArchiveOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 2
QInstaller::ExtractArchiveOperation::Runnable
Could not open %1 for reading: %2.
Error while extracting '%1': %2
Unknown exception caught while extracting %1.
QInstaller::FakeStopProcessForUpdateOperation
Number of arguments does not match: one is required
Could not get package manager core.
This process should be stopped before continuing: %1
These processes should be stopped before continuing: %1
QInstaller::FileTaskObserver
%1 of %2
%1 received.
(%1/sec)
%n day(s),
%n hour(s),
%n minute(s)
%n second(s)
- %1%2%3%4 remaining.
- unknown time remaining.
QInstaller::FinishedPage
Completing the %1 Wizard
Click Done to exit the %1 Wizard.
Click Finish to exit the %1 Wizard.
Restart
Run %1 now.
The %1 Wizard failed.
QInstaller::GlobalSettingsOperation
Settings are not writable
Failed to write settings
Invalid arguments in %0: %1 arguments given, %2 expected%3.
3, 4 or 5
QInstaller::InstallIconsOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
1 or 2
(Sourcepath, [Vendorprefix])
Invalid Argument: source folder must not be empty.
Could not backup file %1: %2
Failed to overwrite %1: %2
Failed to copy file %1: %2
Could not create folder at %1: %2
QInstaller::IntroductionPage
Setup - %1
Welcome to the %1 Setup Wizard.
Add or remove components
Update components
Remove all components
Retrieving information from remote installation sources...
At least one valid and enabled repository required for this action to succeed.
No updates available.
Only local package management available.
Quit
QInstaller::LicenseAgreementPage
License Agreement
Alt+A
agree license
Alt+D
do not agree license
Please read the following license agreement. You must accept the terms contained in this agreement before continuing with the installation.
I accept the license.
I do not accept the license.
Please read the following license agreements. You must accept the terms contained in these agreements before continuing with the installation.
I accept the licenses.
I do not accept the licenses.
QInstaller::LicenseOperation
No license files found to copy.
Needed installer object in %1 operation is empty.
Can not write license file: %1.
No license files found to delete.
QInstaller::LineReplaceOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 3
Failed to open '%1' for reading.
Failed to open '%1' for writing.
QInstaller::MetadataJob
Missing package manager core engine.
Preparing meta information download...
Meta data download canceled.
Missing proxy credentials.
Authentication failed.
Unknown exception during download.
Retrieving meta information from remote repository...
Failure to fetch repositories.
Unknown exception during extracting.
Extracting meta information...
Error while extracting '%1': %2
Unknown exception caught while extracting %1.
Could not open %1 for reading. Error: %2
QInstaller::PackageManagerCore
Error writing Maintenance Tool
Downloading packages...
Installation canceled by user
All downloads finished.
Cancelling the Installer
Authentication Error
Some components could not be removed completely because admin rights could not be acquired: %1.
Unknown error.
Some components could not be removed completely because an unknown error happened.
Application not running in Package Manager mode!
No installed packages found.
Application running in Uninstaller mode!
There is an important update available, please run the updater first.
Error while elevating access rights.
Error
invalid
QInstaller::PackageManagerCorePrivate
Unresolved dependencies
Error
Access error
Format error
Could not write installer configuration to %1: %2
Stop Processes
These processes should be stopped to continue:
%1
Installation canceled by user
Writing maintenance tool.
Failed to seek in file %1: %2
Maintenance tool is not a bundle
Could not write maintenance tool data to %1: %2
Could not remove data file '%1': %2
Could not write maintenance tool to %1: %2
Could not write maintenance tool binary data to %1: %2
Variable 'TargetDir' not set.
Preparing the installation...
It is not possible to install from network location
Creating local repository
Creating Maintenance Tool
Installation finished!
Installation aborted!
It is not possible to run that operation from a network location
Removing deselected components...
Update finished!
Update aborted!
Uninstallation completed successfully.
Uninstallation aborted.
Installing component %1
Installer Error
Error during installation process (%1):
%2
Cannot prepare uninstall
Cannot start uninstall
Error during uninstallation process:
%1
Unknown error
Could not retrieve remote tree: %1.
Failure to read packages from: %1.
Could not retrieve meta information: %1
Could not add temporary update source information.
Could not find any update source information.
Dependency cycle between components detected: '%1' and '%2'.
QInstaller::PackageManagerGui
%1 Setup
Maintain %1
Do you want to cancel the installation process?
Do you want to cancel the uninstallation process?
Do you want to quit the installer application?
Do you want to quit the uninstaller application?
Do you want to quit the maintenance application?
Question
Settings
Error
It is not possible to install from network location.
Please copy the installer to a local drive
QInstaller::PerformInstallationForm
&Show Details
&Hide Details
QInstaller::PerformInstallationPage
U&ninstall
Uninstalling %1
&Update
Updating components of %1
&Install
Installing %1
QInstaller::ProxyCredentialsDialog
Dialog
The proxy %1 requires a username and password.
Username:
Username
Password:
Password
QInstaller::ReadyForInstallationPage
U&ninstall
Ready to Uninstall
Setup is now ready to begin removing %1 from your computer.<br><font color="red">The program directory %2 will be deleted completely</font>, including all content in that directory!
U&pdate
Ready to Update Packages
Setup is now ready to begin updating your installation.
&Install
Ready to Install
Setup is now ready to begin installing %1 on your computer.
Not enough disk space to store temporary files and the installation! Available space: %1, at least required %2.
Not enough disk space to store all selected components! Available space: %1, at least required: %2.
Not enough disk space to store temporary files! Available space: %1, at least required: %2.
The volume you selected for installation seems to have sufficient space for installation, but there will be less than 1% of the volume's space available afterwards. %1
The volume you selected for installation seems to have sufficient space for installation, but there will be less than 100 MB available afterwards. %1
Installation will use %1 of disk space.
Cannot resolve all dependencies.
Components about to be removed.
QInstaller::RegisterFileTypeOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
2 to 5
Registering file types is only supported on Windows.
Register File Type: Invalid arguments
QInstaller::RemoteObject
Could not read all data after sending command: %1. Bytes expected: %2, Bytes received: %3. Error: %4
QInstaller::RemoteServerConnection
Could not read all data after sending command: %1. Bytes expected: %2, Bytes received: %3. Error: %4
QInstaller::ReplaceOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 3
Failed to open %1 for reading
Failed to open %1 for writing
QInstaller::Resource
Could not open Resource '%1' read-only.
Read failed after %1 bytes: %2
Write failed after %1 bytes: %2
QInstaller::RestartPage
Completing the %1 Setup Wizard
QInstaller::ScriptEngine
Could not open the requested script file at %1: %2.
Exception while loading the component script '%1'. (%2)
QInstaller::SelfRestartOperation
Installer object needed in '%1' operation is empty.
Self Restart: Only valid within updater or packagemanager mode.
Self Restart: Invalid arguments
QInstaller::ServerAuthenticationDialog
Server Requires Authentication
You need to supply a username and password to access this site.
Username:
Password:
%1 at %2
QInstaller::SettingsOperation
Missing argument(s) '%1' calling '%2' with arguments '%3'.
Current method argument calling '%1' with arguments '%2' is not supported. Please use set, remove, add_array_value or remove_array_value.
QInstaller::SimpleMoveFileOperation
Invalid arguments in %0: %1 arguments given, %2 expected%3.
exactly 2
None of the arguments can be empty: source '%1', target '%2'.
Cannot move source '%1' to target '%2', because target exists and is not removable.
Cannot move source '%1' to target '%2': %3
Move '%1' to '%2'.
QInstaller::StartMenuDirectoryPage
Start Menu shortcuts
Select the Start Menu in which you would like to create the program's shortcuts. You can also enter a name to create a new folder.
QInstaller::TargetDirectoryPage
Installation Folder
Please specify the folder where %1 will be installed.
Alt+R
browse file system to choose a file
B&rowse...
The folder you selected already exists and contains an installation. Choose a different target for installation.
You have selected an existing, non-empty folder for installation.
Note that it will be completely wiped on uninstallation of this application.
It is not advisable to install into this folder as installation might fail.
Do you want to continue?
You have selected an existing file or symlink, please choose a different target for installation.
Select Installation Folder
The installation path cannot be empty, please specify a valid folder.
The installation path cannot be relative, please specify an absolute path.
The path or installation directory contains non ASCII characters. This is currently not supported! Please choose a different path or installation directory.
As the install directory is completely deleted, installing in %1 is forbidden.
The path you have entered is too long, please make sure to specify a valid path.
The path you have entered is not valid, please make sure to specify a valid target.
The path you have entered is not valid, please make sure to specify a valid drive.
The installation path must not end with '.', please specify a valid folder.
The installation path must not contain '%1', please specify a valid folder.
Warning
Error
QInstaller::TestRepository
Empty repository URL.
URL scheme not supported: %1 (%2).
Got a timeout while testing: '%1'
Could not parse Updates.xml! Error: %1.
Updates.xml could not be opened for reading!
Updates.xml could not be found on server!
QObject
Authorization required
Enter your password to authorize for sudo:
Error acquiring admin rights
RemoteClient
Could not get authorization.
Could not get authorization that is needed for continuing the installation.
Either abort the installation or use the fallback solution by running
%1
as root and then clicking OK.
ResourceCollectionManager
Could not open resource %1: %2
Settings
Could not open settings file %1 for reading: %2
SettingsDialog
Settings
Network
No proxy
System proxy settings
Manual proxy configuration
HTTP proxy:
Port:
FTP proxy:
Repositories
Add Username and Password for authentication if needed.
Use temporary repositories only
Add
Remove
Test
Show Passwords
Check this to use repository during fetch.
Add the username to authenticate on the server.
Add the password to authenticate on the server.
The servers URL that contains a valid repository.
There was an error testing this repository.
Do you want to disable the tested repository?
Hide Passwords
Use
Username
Password
Repository
Default repositories
Temporary repositories
User defined repositories
UpdateOperation
Registry path %1 is not writable
Could not write to registry path %1
Renaming %1 into %2 failed with %3.