/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of PySide2. ** ** $QT_BEGIN_LICENSE:LGPL$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 3 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL3 included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 3 requirements ** will be met: https://www.gnu.org/licenses/lgpl-3.0.html. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 2.0 or (at your option) the GNU General ** Public license version 3 or any later version approved by the KDE Free ** Qt Foundation. The licenses are as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3 ** included in the packaging of this file. Please review the following ** information to ensure the GNU General Public License requirements will ** be met: https://www.gnu.org/licenses/gpl-2.0.html and ** https://www.gnu.org/licenses/gpl-3.0.html. ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #undef QT_NO_STL #undef QT_NO_STL_WCHAR #define Q_BYTE_ORDER // used to enable QSysInfo.Endian detection on MacOSX #if defined(__OBJC__) && !defined(__cplusplus) # warning "File built in Objective-C mode (.m), but using Qt requires Objective-C++ (.mm)" #endif #include QT_BEGIN_NAMESPACE class QByteArray; struct QArrayData; typedef QArrayData QByteArrayData; class QString; #ifndef Q_MOC_OUTPUT_REVISION #define Q_MOC_OUTPUT_REVISION 67 #endif // The following macros are our "extensions" to C++ // They are used, strictly speaking, only by the moc. #ifndef QT_NO_META_MACROS // macro for onaming members #ifdef METHOD #undef METHOD #endif #ifdef SLOT #undef SLOT #endif #ifdef SIGNAL #undef SIGNAL #endif #endif // QT_NO_META_MACROS Q_CORE_EXPORT const char *qFlagLocation(const char *method); #ifndef QT_NO_META_MACROS #ifndef QT_NO_DEBUG # define QLOCATION "\0" __FILE__ ":" QT_STRINGIFY(__LINE__) # ifndef QT_NO_KEYWORDS # define METHOD(a) qFlagLocation("0"#a QLOCATION) # endif # define SLOT(a) qFlagLocation("1"#a QLOCATION) # define SIGNAL(a) qFlagLocation("2"#a QLOCATION) #else # ifndef QT_NO_KEYWORDS # define METHOD(a) "0"#a # endif # define SLOT(a) "1"#a # define SIGNAL(a) "2"#a #endif #define QMETHOD_CODE 0 // member type codes #define QSLOT_CODE 1 #define QSIGNAL_CODE 2 #endif // QT_NO_META_MACROS #define Q_ARG(type, data) QArgument(#type, data) #define Q_RETURN_ARG(type, data) QReturnArgument(#type, data) class QObject; class QMetaMethod; class QMetaEnum; class QMetaProperty; class QMetaClassInfo; class Q_CORE_EXPORT QGenericArgument { public: inline QGenericArgument(const char *aName = 0, const void *aData = 0) : _data(aData), _name(aName) {} inline void *data() const { return const_cast(_data); } inline const char *name() const { return _name; } private: const void *_data; const char *_name; }; class Q_CORE_EXPORT QGenericReturnArgument: public QGenericArgument { public: inline QGenericReturnArgument(const char *aName = 0, void *aData = 0) : QGenericArgument(aName, aData) {} }; template class QArgument: public QGenericArgument { public: inline QArgument(const char *aName, const T &aData) : QGenericArgument(aName, static_cast(&aData)) {} }; template class QArgument: public QGenericArgument { public: inline QArgument(const char *aName, T &aData) : QGenericArgument(aName, static_cast(&aData)) {} }; template class QReturnArgument: public QGenericReturnArgument { public: inline QReturnArgument(const char *aName, T &aData) : QGenericReturnArgument(aName, static_cast(&aData)) {} }; struct Q_CORE_EXPORT QMetaObject { class Connection; const char *className() const; const QMetaObject *superClass() const; QObject *cast(QObject *obj) const; const QObject *cast(const QObject *obj) const; #ifndef QT_NO_TRANSLATION QString tr(const char *s, const char *c, int n = -1) const; #endif // QT_NO_TRANSLATION int methodOffset() const; int enumeratorOffset() const; int propertyOffset() const; int classInfoOffset() const; int constructorCount() const; int methodCount() const; int enumeratorCount() const; int propertyCount() const; int classInfoCount() const; int indexOfConstructor(const char *constructor) const; int indexOfMethod(const char *method) const; int indexOfSignal(const char *signal) const; int indexOfSlot(const char *slot) const; int indexOfEnumerator(const char *name) const; int indexOfProperty(const char *name) const; int indexOfClassInfo(const char *name) const; QMetaMethod constructor(int index) const; QMetaMethod method(int index) const; QMetaEnum enumerator(int index) const; QMetaProperty property(int index) const; QMetaClassInfo classInfo(int index) const; QMetaProperty userProperty() const; static bool checkConnectArgs(const char *signal, const char *method); static bool checkConnectArgs(const QMetaMethod &signal, const QMetaMethod &method); static QByteArray normalizedSignature(const char *method); static QByteArray normalizedType(const char *type); // internal index-based connect static Connection connect(const QObject *sender, int signal_index, const QObject *receiver, int method_index, int type = 0, int *types = 0); // internal index-based disconnect static bool disconnect(const QObject *sender, int signal_index, const QObject *receiver, int method_index); static bool disconnectOne(const QObject *sender, int signal_index, const QObject *receiver, int method_index); // internal slot-name based connect static void connectSlotsByName(QObject *o); // internal index-based signal activation static void activate(QObject *sender, int signal_index, void **argv); static void activate(QObject *sender, const QMetaObject *, int local_signal_index, void **argv); static void activate(QObject *sender, int signal_offset, int local_signal_index, void **argv); static bool invokeMethod(QObject *obj, const char *member, Qt::ConnectionType, QGenericReturnArgument ret, QGenericArgument val0 = QGenericArgument(0), QGenericArgument val1 = QGenericArgument(), QGenericArgument val2 = QGenericArgument(), QGenericArgument val3 = QGenericArgument(), QGenericArgument val4 = QGenericArgument(), QGenericArgument val5 = QGenericArgument(), QGenericArgument val6 = QGenericArgument(), QGenericArgument val7 = QGenericArgument(), QGenericArgument val8 = QGenericArgument(), QGenericArgument val9 = QGenericArgument()); static inline bool invokeMethod(QObject *obj, const char *member, QGenericReturnArgument ret, QGenericArgument val0 = QGenericArgument(0), QGenericArgument val1 = QGenericArgument(), QGenericArgument val2 = QGenericArgument(), QGenericArgument val3 = QGenericArgument(), QGenericArgument val4 = QGenericArgument(), QGenericArgument val5 = QGenericArgument(), QGenericArgument val6 = QGenericArgument(), QGenericArgument val7 = QGenericArgument(), QGenericArgument val8 = QGenericArgument(), QGenericArgument val9 = QGenericArgument()) { return invokeMethod(obj, member, Qt::AutoConnection, ret, val0, val1, val2, val3, val4, val5, val6, val7, val8, val9); } static inline bool invokeMethod(QObject *obj, const char *member, Qt::ConnectionType type, QGenericArgument val0 = QGenericArgument(0), QGenericArgument val1 = QGenericArgument(), QGenericArgument val2 = QGenericArgument(), QGenericArgument val3 = QGenericArgument(), QGenericArgument val4 = QGenericArgument(), QGenericArgument val5 = QGenericArgument(), QGenericArgument val6 = QGenericArgument(), QGenericArgument val7 = QGenericArgument(), QGenericArgument val8 = QGenericArgument(), QGenericArgument val9 = QGenericArgument()) { return invokeMethod(obj, member, type, QGenericReturnArgument(), val0, val1, val2, val3, val4, val5, val6, val7, val8, val9); } static inline bool invokeMethod(QObject *obj, const char *member, QGenericArgument val0 = QGenericArgument(0), QGenericArgument val1 = QGenericArgument(), QGenericArgument val2 = QGenericArgument(), QGenericArgument val3 = QGenericArgument(), QGenericArgument val4 = QGenericArgument(), QGenericArgument val5 = QGenericArgument(), QGenericArgument val6 = QGenericArgument(), QGenericArgument val7 = QGenericArgument(), QGenericArgument val8 = QGenericArgument(), QGenericArgument val9 = QGenericArgument()) { return invokeMethod(obj, member, Qt::AutoConnection, QGenericReturnArgument(), val0, val1, val2, val3, val4, val5, val6, val7, val8, val9); } QObject *newInstance(QGenericArgument val0 = QGenericArgument(0), QGenericArgument val1 = QGenericArgument(), QGenericArgument val2 = QGenericArgument(), QGenericArgument val3 = QGenericArgument(), QGenericArgument val4 = QGenericArgument(), QGenericArgument val5 = QGenericArgument(), QGenericArgument val6 = QGenericArgument(), QGenericArgument val7 = QGenericArgument(), QGenericArgument val8 = QGenericArgument(), QGenericArgument val9 = QGenericArgument()) const; enum Call { InvokeMetaMethod, ReadProperty, WriteProperty, ResetProperty, QueryPropertyDesignable, QueryPropertyScriptable, QueryPropertyStored, QueryPropertyEditable, QueryPropertyUser, CreateInstance, IndexOfMethod, RegisterPropertyMetaType, RegisterMethodArgumentMetaType }; int static_metacall(Call, int, void **) const; static int metacall(QObject *, Call, int, void **); struct { // private data const QMetaObject *superdata; const QByteArrayData *stringdata; const uint *data; typedef void (*StaticMetacallFunction)(QObject *, QMetaObject::Call, int, void **); StaticMetacallFunction static_metacall; const QMetaObject * const *relatedMetaObjects; void *extradata; //reserved for future use } d; }; class Q_CORE_EXPORT QMetaObject::Connection { void *d_ptr; //QObjectPrivate::Connection* explicit Connection(void *data) : d_ptr(data) { } friend class QObject; friend class QObjectPrivate; friend struct QMetaObject; public: ~Connection(); Connection(); Connection(const Connection &other); Connection &operator=(const Connection &other); #ifdef Q_QDOC operator bool() const; #else typedef void *Connection::*RestrictedBool; operator RestrictedBool() const { return d_ptr ? &Connection::d_ptr : 0; } #endif #ifdef Q_COMPILER_RVALUE_REFS inline Connection(Connection &&o) : d_ptr(o.d_ptr) { o.d_ptr = 0; } inline Connection &operator=(Connection &&other) { qSwap(d_ptr, other.d_ptr); return *this; } #endif }; inline const QMetaObject *QMetaObject::superClass() const { return d.superdata; } namespace QtPrivate { /* Trait that tells is a the Object has a Q_OBJECT macro */ template struct HasQ_OBJECT_Macro { template static char test(int (T::*)(QMetaObject::Call, int, void **)); static int test(int (Object::*)(QMetaObject::Call, int, void **)); enum { Value = sizeof(test(&Object::qt_metacall)) == sizeof(int) }; }; } QT_END_NAMESPACE // This Q_QDOC definition is only a convenience, since the shiboken parser is // happier with the simplified constructions. XXX remove this for Qt 5.7. #define Q_QDOC #if @ENABLE_X11@ #define Q_OS_X11 #elif @ENABLE_MAC@ #define Q_OS_MAC #elif @ENABLE_WIN@ #include "pysidewtypes.h" #define Q_OS_WIN #endif // There are symbols in Qt that exist in Debug but // not in release #define QT_NO_DEBUG #include #if @ENABLE_MAC@ || @ENABLE_WIN@ || @ENABLE_X11@ // Workaround to parse the QApplication header #define Q_INTERNAL_QAPP_SRC #undef Q_QDOC #endif #if @Qt5Gui_FOUND@ # include #endif #if @Qt5Widgets_FOUND@ # include #endif #ifndef Q_QDOC // Make sure that Q_QDOC is defined for as much modules as possible. // This creates more wrappers without extra work. // Will disappear when we have a really good parser! # define Q_QDOC #endif #include "qpytextobject.h" // PySide class #if @ENABLE_X11@ # if @Qt5X11Extras_FOUND@ # include # endif #elif @ENABLE_MAC@ # include #endif // QT_WIDGETS_LIB must be defined to QSqlRelationalDelegate become visible. // It also changes code generation in pysideqtesttouch.h #define QT_WIDGETS_LIB #undef Q_DECLARE_INTERFACE #if @Qt5Test_FOUND@ # include "pysideqtesttouch.h" #endif #ifndef QT_NO_OPENGL # include <@GL_H@> #endif // QT_NO_OPENGL // Here are now all configured modules appended: