path: root/tests/systemtests/sys_multimedia/sys_multimedia.qtt

/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the Qt Mobility Components.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights.  These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

//TESTED_COMPONENT=src/multimedia

testcase = {

/* Notes
Ensure 2 test .mp4 files are available on device
Ensure 2 test .mp3 file available on device
Ensure 2 test .wav file available on device
Ensure a number of .jpg, .gif and .png files are available on device
Ensure a valid m3u file referring to locations of indicated media is available on the device
Ensure the device can ping destinations on the network (if applicable)
Have an audio stream url available (e.g. http://202.6.74.107:8060/triplej.mp3 for example)
Have a video stream url available (e.g. http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4)
Ensure access to Internet available to device
Ensure radio reception is available in testing area
A device specific headset is required to be connected to device for radio testing
*/
    initTestCase: function()
    {
    },

    play_an_audio_file_data: {
        mp3:[".mp3", "filename", "mpeg audio layer 3"],
        wav:[".wav", "filename", "waveform audio"]
    },

    play_an_audio_file: function(extension, filename, format)
    {
        prompt(twiki("Ensure a test "+extension+" file is available on device"));
        prompt(twiki("Launch player application
Select [Open]
In [Open File] select the "+filename+extension+" file to return to player UI
Verify selected file has populated playlist window
Highlight file in playlist window by clicking on it
Select [Play]
Verify that the "+format+" file is audible on device"));
    },

    basic_player_controls_for_audio_data: {
        mp3:[".mp3", "filename", "mpeg audio layer 3"],
    },

    basic_player_controls_for_audio: function(extension, filename, format)
    {
        prompt(twiki("Ensure a test "+extension+" file is available on device"));
prompt(twiki("Launch player application
Select [Open]
In [Open File] select the "+filename+extension+" file to return to player UI
Select [Play] to play the file
Select [Pause]
Verify that file has paused
Verify that [Pause] control has now changed to [Play] control
Select [Play]
Verify that file continues to play from where previously paused.
Verify that [Play] icon is now a [Pause] icon
Select [Next File] control
Verify that next file in playlist is playing from start
After some time (10-20 sec) Select [Beginning of File] control
Verify that current file is being played from start
Let some arbitrary time pass, then Select [Beginning of File] control twice in quick succession.
Verify that previous file in playlist is playing from start
Select [Stop] control
Verify that file has stopped playing
Select [Play]
Verify that file continues to play from start of file.
Let file play till end
Verify player continues playing the next file in the playlist window
After some arbitrary time, Select [Stop]
Select [Next File] control
Verify that next file in playlist is highlighted
Verify that file is not automatically playing
Select [Beginning of File] control
Verify that previous file in playlist is highlighted
Select file in playlist
Verify that file plays in player.
Select number of files greater than can be displayed without scrolling in to playlist
Verify that list can be scrolled through
With file playing, verify that hardware keys can change volume up and down
With file playing, verify that UI volume control slider can change volume up and down
Select volume at 50% (or thereabout)
Select [Mute]
Verify that sound is muted while file is playing
Verify that [Mute] control is displaying the Muted icon
Select [Mute] control again
Verify that sound has reverted back to level selected prior to muting
Drag positional slider to right, then release
Verify that player continues to play file at later part of file
Drag positional slider to left, then release
Verify that player continues to play file at earlier part of file"));

// Note: [Color Option] is not implemented so far in player
// Note: [Full Screen] opens a blank screen with no content

    },

    seek_controls_for_audio_data: {
        mp3:[".mp3", "filename", "mpeg audio layer 3"],
    },

    seek_controls_for_audio: function(extension, filename, format)
    {
        prompt(twiki("Ensure a test "+extension+" file is available on device"));
prompt(twiki("Launch player application
Select [Open]
In [Open File] select the "+filename+extension+" file to return to player UI
Select [Play] to play the file
Select the [1.0] (Multiplier) control.
Select [2.0]
Verify that file is playing at double speed
With multiplier control set on [2.0], select a new file from the playlist window
Verify that the Multiplier control has reverted back to [1.0]
Verify that the audio is playing at normal speed
Select [Multiplier] control.
Select [0.5]
Verify that file is playing at half speed
With multiplier control set on [0.5], select a new file from the playlist window
Verify that the Multiplier control has reverted back to [1.0]
Verify that the audio is playing at normal speed"));
    },

    play_a_video_file_data: {
        mp4:[".mp4", "filename", "mpeg video layer 4"]
    },

    play_a_video_file: function(extension, filename, format)
    {
        prompt(twiki("Ensure a test "+extension+" file is available on device"));
prompt(twiki("Launch player application
Select [Open]
In [Open File] select the "+filename+extension+" file to return to player UI
Select [Play] to play the file
Verify selected file has populated playlist
Highlight file in playlist by clicking on it
Select [Play]
Verify that .MP4 file is playing on device"));
    },

    basic_controls_for_video_data: {
        mp4:[".mp4", "filename", "mpeg video layer 4"]
    },

    basic_controls_for_video: function(extension, filename, format)
    {
        prompt(twiki("Launch player application
Select [Open]
In [Open File] select the "+filename+extension+" file to return to player UI
Select [Play] to play the file
Select [Pause]
Verify that file has paused
Verify that the [Pause] icon has changed to a [Play] icon
Select [Play]
Verify that the [Play] icon has changed to a [Pause] icon
Verify that file continues to play from where previously paused.
Select [Next File]
Verify that next file in playlist is playing from start
After some time (10-20 sec) Select [Beginning of File] control
Verify that current file is being played from start
Let arbitrary time pass, then Select [Beginning of File] control twice in quick succession.
Verify that previous file in playlist is playing from start
Select [Stop]
Verify that file has stopped playing
Select [Play]
Verify that file continues to play from start of file.
Let file play till end
Verify player stops at end of file.
Start playing file.
After arbitrary time, Select [Stop]
Select [Next File]
Verify that next file in playlist is highlighted
Verify that file is not automatically playing
Select [Beginning of File]
Verify that previous file in playlist is highlighted
Select file in playlist
Verify that file plays in player.
Select number of files greater than can be displayed without scrolling in to playlist
Verify that list can be scrolled through
With file playing, verify that hardware keys can change volume up and down
With file playing, verify that UI volume control slider can change volume up and down
Select volume at 50% (or thereabout)
Select [Mute] control
Verify that sound is muted while file is playing
Verify that [Mute] control is displaying the Muted icon
Select [Mute] control again
Verify that sound has reverted back to level selected prior to muting
Drag positional slider to right, then release
Verify that player continues to play file at later part of file
Drag positional slider to left, then release
Verify that player continues to play file at earlier part of file
Start playing file
Select [FullScreen] control
Verify that video is now playing in Fullscreen mode
When at end of current file, verify that next file in playlist is being played
When at last file in playlist and at end of file, verify that fullscreen mode is exited and user returned to player interface and that [FullScreen] is no longer selected."));
    },

    seek_controls_for_video: function()
    {
        prompt(twiki("
While playing a video file, Select or Tap on [1.0] (Multiplier) control
Select [2.0]
Verify that file is playing at double speed
Select [Multiplier] control
Select [0.5]
Verify that file is playing at half speed"));
    },

    basic_controls_for_streamed_content: function()
    {

//*Note* Functionality for this feature is being implemented due to bugs in .m3u playback on Maemo. Once resolved, this test will revert back to its original form
//*Note* In order to play stream on Maemo, invoke player with following command from console:
//            run-standalone.sh ./player http://202.6.74.107:8060/triplej.mp3
//*Note* For this test you need a playlist of streaming media urls. Suggest: http://202.6.74.107:8060/triplej.mp3 ; http://www.abc.net.au/streaming/triplej.asx ; rtsp://media1.abc.net.au/broadcast/triplej.rm ; mms://media3.abc.net.au/triplej ; depending on your platform and backend support.

        prompt(twiki("Launch player application
In player application, Select or Tap [Open]
In [Open File] navigate and highlight test playlist file
Select or Tap on selected file to return to player UI
Verify selected file has populated playlist
Highlight file in playlist by selecting or clicking it
Select [Play]
Verify that stream is playing on device
Select [Pause]
Verify that stream is paused on device
Verify that the [Pause] button has changed to a [Play] button
Select [Play] again
Verify that stream is playing on device
Select [Stop]
Open local mp3 file in to play list and select it to play
Verify that the mp3 plays while the stream name is still present in the playlist
Re-select the stream in the playlist
Verify that the stream starts playing again
Select [Next File]
Verify that the player started playing the next file in the playlist
Select [Previous File]
Verify that the original stream is playing again
During stream playback, have headphones connected to device
Verify that the sound is now playing through the headphones
Invoke a system notification on the device (such as an incoming SMS)
Verify that the device correctly transmits the audible system notification through the devices speakers and then returns to playing the stream through the headphones"));
    },
    
    play_a_radio_transmission: function()
    {
//    *Note* This test requires radio reception and headphones to be connected to device
//    *Note* Audible system notifications should be enabled for this test

        prompt(twiki("Start Radio application
Verify that 0 KHz and No Signal is displayed
Select [Scan Up]
Audible white noise should be heard as the radio searches for a frequency lock
Frequency should be increasing in 100 KHz steps until a strong signal is found
Verify that a radio signal can be heard. It is possible for the radio to lock on a silent station signal, in that case progress further up the frequencies
Once a strong audible signal is found
Verify that the stations frequency and Got Signal message is displayed
Select [Scan Up]
Verify that the radio has moved off the previous station and in progressing through the frequencies
Once on a radio station, Select [Freq Up]
Verify that the radio frequency has moved off the station by 100KHz and is stationary
Select [Freq Up] again
Verify that the radio frequency has moved up another 100KHz and is stationary
Select [Freq Down] twice
Verify that you are now at the frequency of the previous radio station and that the signal is audible
Select [Scan Down]
Verify that the radio has moved off the previous station, progressing through the frequencies, and finds the original station from this test
Exit the radio application
Verify that the radio station is no longer heard"));
    },

    radio_interrupted_by_system_notification: function()
    {
        prompt(twiki("Launch the radio application
Locate a strong radio station signal by scanning upwards
While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification)
Verify that after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones"));
    },

    basic_radio_controls: function()
    {
        prompt(twiki("Launch the radio application
Locate a strong radio station signal by scanning upwards
While on a strong and audible radio signal, move volume slider to the right
Verify that the audio volume of the radio station is amplified
Move volume slider to the left
Verify that the audio volume is lowered
Move the volume slider all the way to the left
Verify that the sound is now completely muted"));
    },

    take_a_photo: function()
    {
        prompt(twiki("Launch camera application
 If device has lens cover, make sure it is open
 Select Image tab to put camera in still mode
 Verify the intended scene is reproduced in the preview/viewfinder
 Select Capture Photo
 If applicable, verify that flash has triggered
 Verify that image is shown on screen for preview
 Verify that a new file is in the Images folder and accessabble with the image viewer
 Select given image and Verify that it is a true representation of the intended sceen
 Verify the image has no unintended artifacts and noise and is properly formatted"));
    },

    record_an_audio_file: function()
    {

// Note: On Maemo5, accepting the default for Input Device, Audio Codec, File Container and Sample Rate will produce a valid audio file.
// Note: Selecting the alternative selection, if available, works as well.

        prompt(twiki("Open audiorecorder application
 Select Input Device
 Select Audio Codec
 Select File Container
 Select Sample Rate
 Select Quality and Bitrate
 Select Output... and select location and name of output file
 Select Record
 Verify that [Record] button has changed in to [Stop]
 Verify that Duration is counting seconds
 Verify that Recording is displayed
 Select Stop
 Verify that Duration is now 0
 Select Output File in file browser
 Verify that an audio file has been generated
 Play output file in media player
 Verify that audible audio is recorded in file"));
    },

pause_recording_an_audio_file: function()
    {
// Note: On Maemo5, accepting the default for Input Device, Audio Codec, File Container and Sample Rate will produce a valid audio file.
// Note: Selecting the alternative selection, if available, works as well.

        prompt(twiki("Open audiorecorder application
 Select Input Device
 Select Audio Codec
 Select File Container
 Select Sample Rate
 Select Quality and Bitrate
 Select Output... and select location and name of output file
 Select Record
 Verify that [Record] button has changed in to [Stop]
 Verify that Duration is counting seconds
 Verify that Recording is displayed
 Select Pause
 Verify that instead of Duration, Paused is displayed
 Select Resume
 Verify that the counter has resumed the seconds count from where it was previously paused.
 After a arbitrary time, Stop the recording.
 Select Output File in file browser
 Verify that an audio file has been generated
 Play output file in media player
 Verify that audible audio is recorded in file and that audio is only recorded for period that Pause was not selected
 Verify there is no audible artifact that separates the two or more recording periods, that is that the joint is seamless"));
    },

    play_a_slideshow: function()
    {
        prompt(twiki("Launch the slideshow application
Select [Open] Icon
Select Directory from the list
Navigate to desired directory
Select desired directory containing pictures
Select [Play]
Verify that the slideshow starts
Select [Pause]
Verify that slideshow stops on given image
Select [Play] again
Verify that slideshow resumes
Select [Next File]
Verify that slideshow jumps to next image in directory
Select [Previous File]
Verify that slideshow jumps to previous image in directory
Select [Stop]
Verify that slideshow has stopped
Select [Open] Icon
Select Playlist from the list
Select [Play]
Verify that slideshow starts
Select [Pause]
Verify that slideshow stops on given image
Select [Play] again
Verify that slideshow resumes
Select [Next File]
Verify that slideshow jumps to next image in directory
Select [Previous File]
Verify that slideshow jumps to previous image in directory
Select [Stop]
Verify that slideshow has stopped"));
    }

}