Centralized qmlapplicationviewer for declarative examples and demos

These centralized qmlapplicationviewer files are used from declarative
examples and demos. Centralization decreases duplicate files and
eases maintaining.

Merge-request: 2719
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>

3 files changed, 421 insertions, 0 deletions

diff --git a/examples/tools/qmlapplicationviewer/qmlapplicationviewer.cpp b/examples/tools/qmlapplicationviewer/qmlapplicationviewer.cpp
new file mode 100644
index 0000000000..c9a16b052c
--- /dev/null
+++ b/examples/tools/qmlapplicationviewer/qmlapplicationviewer.cpp
@@ -0,0 +1,196 @@
+/****************************************************************************
+**
+** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*
+  This file was created by the Qt Quick Application wizard of Qt Creator.
+  QmlApplicationViewer is a convenience class containing mobile device specific
+  code such as screen orientation handling. Also QML paths and debugging are
+  handled here.
+  It is recommended not to modify this file, since newer versions of Qt Creator
+  may offer an updated version of it.
+*/
+
+#include "qmlapplicationviewer.h"
+
+#include <QtCore/QCoreApplication>
+#include <QtCore/QDir>
+#include <QtCore/QFileInfo>
+#include <QtDeclarative/QDeclarativeComponent>
+#include <QtDeclarative/QDeclarativeEngine>
+#include <QtDeclarative/QDeclarativeContext>
+
+#if defined(QMLJSDEBUGGER)
+#include <qt_private/qdeclarativedebughelper_p.h>
+#endif
+
+#if defined(QMLJSDEBUGGER) && !defined(NO_JSDEBUGGER)
+#include <jsdebuggeragent.h>
+#endif
+#if defined(QMLJSDEBUGGER) && !defined(NO_QMLOBSERVER)
+#include <qdeclarativeviewobserver.h>
+#endif
+
+#if defined(Q_OS_SYMBIAN) && defined(ORIENTATIONLOCK)
+#include <eikenv.h>
+#include <eikappui.h>
+#include <aknenv.h>
+#include <aknappui.h>
+#endif // Q_OS_SYMBIAN && ORIENTATIONLOCK
+
+#if defined(QMLJSDEBUGGER)
+
+// Enable debugging before any QDeclarativeEngine is created
+struct QmlJsDebuggingEnabler
+{
+    QmlJsDebuggingEnabler()
+    {
+        QDeclarativeDebugHelper::enableDebugging();
+    }
+};
+
+// Execute code in constructor before first QDeclarativeEngine is instantiated
+static QmlJsDebuggingEnabler enableDebuggingHelper;
+
+#endif // QMLJSDEBUGGER
+
+class QmlApplicationViewerPrivate
+{
+    QString mainQmlFile;
+    friend class QmlApplicationViewer;
+    static QString adjustPath(const QString &path);
+};
+
+QString QmlApplicationViewerPrivate::adjustPath(const QString &path)
+{
+#ifdef Q_OS_UNIX
+#ifdef Q_OS_MAC
+    if (!QDir::isAbsolutePath(path))
+        return QCoreApplication::applicationDirPath()
+                + QLatin1String("/../Resources/") + path;
+#else
+    const QString pathInShareDir = QCoreApplication::applicationDirPath()
+        + QLatin1String("/../share/")
+        + QFileInfo(QCoreApplication::applicationFilePath()).fileName()
+        + QLatin1Char('/') + path;
+    if (QFileInfo(pathInShareDir).exists())
+        return pathInShareDir;
+#endif
+#endif
+    return path;
+}
+
+QmlApplicationViewer::QmlApplicationViewer(QWidget *parent) :
+    QDeclarativeView(parent),
+    m_d(new QmlApplicationViewerPrivate)
+{
+    connect(engine(), SIGNAL(quit()), SLOT(close()));
+    setResizeMode(QDeclarativeView::SizeRootObjectToView);
+#if defined(QMLJSDEBUGGER) && !defined(NO_JSDEBUGGER)
+    new QmlJSDebugger::JSDebuggerAgent(engine());
+#endif
+#if defined(QMLJSDEBUGGER) && !defined(NO_QMLOBSERVER)
+    new QmlJSDebugger::QDeclarativeViewObserver(this, parent);
+#endif
+}
+
+QmlApplicationViewer::~QmlApplicationViewer()
+{
+    delete m_d;
+}
+
+void QmlApplicationViewer::setMainQmlFile(const QString &file)
+{
+    m_d->mainQmlFile = QmlApplicationViewerPrivate::adjustPath(file);
+    setSource(QUrl::fromLocalFile(m_d->mainQmlFile));
+}
+
+void QmlApplicationViewer::addImportPath(const QString &path)
+{
+    engine()->addImportPath(QmlApplicationViewerPrivate::adjustPath(path));
+}
+
+void QmlApplicationViewer::setOrientation(ScreenOrientation orientation)
+{
+#ifdef Q_OS_SYMBIAN
+    if (orientation != ScreenOrientationAuto) {
+#if defined(ORIENTATIONLOCK)
+        const CAknAppUiBase::TAppUiOrientation uiOrientation =
+                (orientation == ScreenOrientationLockPortrait) ? CAknAppUi::EAppUiOrientationPortrait
+                    : CAknAppUi::EAppUiOrientationLandscape;
+        CAknAppUi* appUi = dynamic_cast<CAknAppUi*> (CEikonEnv::Static()->AppUi());
+        TRAPD(error,
+            if (appUi)
+                appUi->SetOrientationL(uiOrientation);
+        );
+        Q_UNUSED(error)
+#else // ORIENTATIONLOCK
+        qWarning("'ORIENTATIONLOCK' needs to be defined on Symbian when locking the orientation.");
+#endif // ORIENTATIONLOCK
+    }
+#elif defined(Q_WS_MAEMO_5)
+    Qt::WidgetAttribute attribute;
+    switch (orientation) {
+    case ScreenOrientationLockPortrait:
+        attribute = Qt::WA_Maemo5PortraitOrientation;
+        break;
+    case ScreenOrientationLockLandscape:
+        attribute = Qt::WA_Maemo5LandscapeOrientation;
+        break;
+    case ScreenOrientationAuto:
+    default:
+        attribute = Qt::WA_Maemo5AutoOrientation;
+        break;
+    }
+    setAttribute(attribute, true);
+#else // Q_OS_SYMBIAN
+    Q_UNUSED(orientation);
+#endif // Q_OS_SYMBIAN
+}
+
+void QmlApplicationViewer::showExpanded()
+{
+#ifdef Q_OS_SYMBIAN
+    showFullScreen();
+#elif defined(Q_WS_MAEMO_5) || defined(Q_WS_MAEMO_6)
+    showMaximized();
+#else
+    show();
+#endif
+}
diff --git a/examples/tools/qmlapplicationviewer/qmlapplicationviewer.h b/examples/tools/qmlapplicationviewer/qmlapplicationviewer.h
new file mode 100644
index 0000000000..1ded60025e
--- /dev/null
+++ b/examples/tools/qmlapplicationviewer/qmlapplicationviewer.h
@@ -0,0 +1,78 @@
+/****************************************************************************
+**
+** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the QtCore module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*
+  This file was created by the Qt Quick Application wizard of Qt Creator.
+  QmlApplicationViewer is a convenience class containing mobile device specific
+  code such as screen orientation handling. Also QML paths and debugging are
+  handled here.
+  It is recommended not to modify this file, since newer versions of Qt Creator
+  may offer an updated version of it.
+*/
+
+#ifndef QMLAPPLICATIONVIEWER_H
+#define QMLAPPLICATIONVIEWER_H
+
+#include <QtDeclarative/QDeclarativeView>
+
+class QmlApplicationViewer : public QDeclarativeView
+{
+    Q_OBJECT
+
+public:
+    enum ScreenOrientation {
+        ScreenOrientationLockPortrait,
+        ScreenOrientationLockLandscape,
+        ScreenOrientationAuto
+    };
+
+    explicit QmlApplicationViewer(QWidget *parent = 0);
+    virtual ~QmlApplicationViewer();
+
+    void setMainQmlFile(const QString &file);
+    void addImportPath(const QString &path);
+    void setOrientation(ScreenOrientation orientation);
+    void showExpanded();
+
+private:
+    class QmlApplicationViewerPrivate *m_d;
+};
+
+#endif // QMLAPPLICATIONVIEWER_H
diff --git a/examples/tools/qmlapplicationviewer/qmlapplicationviewer.pri b/examples/tools/qmlapplicationviewer/qmlapplicationviewer.pri
new file mode 100644
index 0000000000..1dda2552df
--- /dev/null
+++ b/examples/tools/qmlapplicationviewer/qmlapplicationviewer.pri
@@ -0,0 +1,147 @@
+# This file was created by the Qt Quick Application wizard of Qt Creator.
+# The code below adds the QmlApplicationViewer to the project and handles the
+# activation of QML debugging.
+# It is recommended not to modify this file, since newer versions of Qt Creator
+# may offer an updated version of it.
+
+QT += declarative
+
+SOURCES += $$PWD/qmlapplicationviewer.cpp
+HEADERS += $$PWD/qmlapplicationviewer.h
+INCLUDEPATH += $$PWD
+
+# Include JS debugger library if QMLJSDEBUGGER_PATH is set
+!isEmpty(QMLJSDEBUGGER_PATH) {
+    include($$QMLJSDEBUGGER_PATH/qmljsdebugger-lib.pri)
+} else {
+    DEFINES -= QMLJSDEBUGGER
+}
+
+contains(CONFIG,qdeclarative-boostable):contains(MEEGO_EDITION,harmattan) {
+    DEFINES += HARMATTAN_BOOSTER
+}
+# This file was created by an application wizard of Qt Creator.
+# The code below handles deployment to Symbian and Maemo, aswell as copying
+# of the application data to shadow build directories on desktop.
+# It is recommended not to modify this file, since newer versions of Qt Creator
+# may offer an updated version of it.
+
+defineTest(qtcAddDeployment) {
+for(deploymentfolder, DEPLOYMENTFOLDERS) {
+    item = item$${deploymentfolder}
+    itemsources = $${item}.sources
+    $$itemsources = $$eval($${deploymentfolder}.source)
+    itempath = $${item}.path
+    $$itempath= $$eval($${deploymentfolder}.target)
+    export($$itemsources)
+    export($$itempath)
+    DEPLOYMENT += $$item
+}
+
+MAINPROFILEPWD = $$_PRO_FILE_PWD_
+
+symbian {
+    isEmpty(ICON):exists($${TARGET}.svg):ICON = $${TARGET}.svg
+    isEmpty(TARGET.EPOCHEAPSIZE):TARGET.EPOCHEAPSIZE = 0x20000 0x2000000
+} else:win32 {
+    copyCommand =
+    for(deploymentfolder, DEPLOYMENTFOLDERS) {
+        source = $$MAINPROFILEPWD/$$eval($${deploymentfolder}.source)
+        source = $$replace(source, /, \\)
+        sourcePathSegments = $$split(source, \\)
+        target = $$OUT_PWD/$$eval($${deploymentfolder}.target)/$$last(sourcePathSegments)
+        target = $$replace(target, /, \\)
+        target ~= s,\\\\\\.?\\\\,\\,
+        !isEqual(source,$$target) {
+            !isEmpty(copyCommand):copyCommand += &&
+            isEqual(QMAKE_DIR_SEP, \\) {
+                copyCommand += $(COPY_DIR) \"$$source\" \"$$target\"
+            } else {
+                source = $$replace(source, \\\\, /)
+                target = $$OUT_PWD/$$eval($${deploymentfolder}.target)
+                target = $$replace(target, \\\\, /)
+                copyCommand += test -d \"$$target\" || mkdir -p \"$$target\" && cp -r \"$$source\" \"$$target\"
+            }
+        }
+    }
+    !isEmpty(copyCommand) {
+        copyCommand = @echo Copying application data... && $$copyCommand
+        copydeploymentfolders.commands = $$copyCommand
+        first.depends = $(first) copydeploymentfolders
+        export(first.depends)
+        export(copydeploymentfolders.commands)
+        QMAKE_EXTRA_TARGETS += first copydeploymentfolders
+    }
+} else:unix {
+    maemo5 {
+        desktopfile.files = $${TARGET}.desktop
+        desktopfile.path = /usr/share/applications/hildon
+        icon.files = $${TARGET}64.png
+        icon.path = /usr/share/icons/hicolor/64x64/apps
+    } else:!isEmpty(MEEGO_VERSION_MAJOR) {
+        desktopfile.files = $${TARGET}_harmattan.desktop
+        desktopfile.path = /usr/share/applications
+        icon.files = $${TARGET}80.png
+        icon.path = /usr/share/icons/hicolor/80x80/apps
+    } else { # Assumed to be a Desktop Unix
+        copyCommand =
+        for(deploymentfolder, DEPLOYMENTFOLDERS) {
+            source = $$MAINPROFILEPWD/$$eval($${deploymentfolder}.source)
+            source = $$replace(source, \\\\, /)
+            macx {
+                target = $$OUT_PWD/$${TARGET}.app/Contents/Resources/$$eval($${deploymentfolder}.target)
+            } else {
+                target = $$OUT_PWD/$$eval($${deploymentfolder}.target)
+            }
+            target = $$replace(target, \\\\, /)
+            sourcePathSegments = $$split(source, /)
+            targetFullPath = $$target/$$last(sourcePathSegments)
+            targetFullPath ~= s,/\\.?/,/,
+            !isEqual(source,$$targetFullPath) {
+                !isEmpty(copyCommand):copyCommand += &&
+                copyCommand += $(MKDIR) \"$$target\"
+                copyCommand += && $(COPY_DIR) \"$$source\" \"$$target\"
+            }
+        }
+        !isEmpty(copyCommand) {
+            copyCommand = @echo Copying application data... && $$copyCommand
+            copydeploymentfolders.commands = $$copyCommand
+            first.depends = $(first) copydeploymentfolders
+            export(first.depends)
+            export(copydeploymentfolders.commands)
+            QMAKE_EXTRA_TARGETS += first copydeploymentfolders
+        }
+    }
+    installPrefix = /opt/$${TARGET}
+    for(deploymentfolder, DEPLOYMENTFOLDERS) {
+        item = item$${deploymentfolder}
+        itemfiles = $${item}.files
+        $$itemfiles = $$eval($${deploymentfolder}.source)
+        itempath = $${item}.path
+        $$itempath = $${installPrefix}/$$eval($${deploymentfolder}.target)
+        export($$itemfiles)
+        export($$itempath)
+        INSTALLS += $$item
+    }
+
+    !isEmpty(desktopfile.path) {
+        export(icon.files)
+        export(icon.path)
+        export(desktopfile.files)
+        export(desktopfile.path)
+        INSTALLS += icon desktopfile
+    }
+
+    target.path = $${installPrefix}/bin
+    export(target.path)
+    INSTALLS += target
+}
+
+export (ICON)
+export (INSTALLS)
+export (DEPLOYMENT)
+export (TARGET.EPOCHEAPSIZE)
+export (TARGET.CAPABILITY)
+export (LIBS)
+export (QMAKE_EXTRA_TARGETS)
+}