CloseButtonClose TabFakeReplyFake error !Invalid URLPhonon::NotificationsMusicVideoCommunicationGamesAccessibilityPhonon::AudioOutput<html>The audio playback device <b>%1</b> does not work.<br/>Falling back to <b>%2</b>.</html><html>Switching to the audio playback device <b>%1</b><br/>which just became available and has higher preference.</html>Revert back to device '%1'Phonon::Gstreamer::BackendWarning: You do not seem to have the package gstreamer0.10-plugins-good installed.
Some video features have been disabled.Warning: You do not seem to have the base GStreamer plugins installed.
All audio and video support has been disabledPhonon::Gstreamer::MediaObjectCannot start playback.
Check your GStreamer installation and make sure you
have libgstreamer-plugins-base installed.A required codec is missing. You need to install the following codec(s) to play this content: %0Could not open media source.Invalid source type.Could not locate media source.Could not open audio device. The device is already in use.Could not decode media source.Phonon::MMFAudio OutputThe audio output deviceNo errorNot foundOut of memoryNot supportedOverflowUnderflowAlready existsPath not foundIn useNot readyAccess deniedCould not connectDisconnectedPermission deniedInsufficient bandwidthNetwork unavailableNetwork communication errorStreaming not supportedServer alertInvalid protocolInvalid URLMulticast errorProxy server errorProxy server not supportedAudio output errorVideo output errorDecoder errorAudio or video components could not be playedDRM errorUnknown error (%1)Phonon::MMF::AbstractMediaPlayerNot ready to playError opening fileError opening URLSetting volume failedPlayback completePhonon::MMF::AudioEqualizer%1 HzPhonon::MMF::AudioPlayerGetting position failedOpening clip failedPhonon::MMF::EffectFactoryEnabledPhonon::MMF::EnvironmentalReverbDecay HF ratio (%)Decay time (ms)Density (%)Diffusion (%)Reflections delay (ms)Reflections level (mB)Reverb delay (ms)Reverb level (mB)Room HF levelRoom level (mB)Phonon::MMF::MediaObjectError opening source: type not supportedError opening source: media type could not be determinedPhonon::MMF::StereoWideningLevel (%)Phonon::MMF::VideoPlayerPause failedSeek failedGetting position failedOpening clip failedBuffering clip failedVideo display errorPhonon::VolumeSliderVolume: %1%Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1%MutedQ3Accel%1, %2 not definedAmbiguous %1 not handledQ3DataTableTrueFalseInsertUpdateDeleteQ3FileDialogCopy or Move a FileRead: %1Write: %1CancelAll Files (*)NameSizeTypeDateAttributes&OKLook &in:File &name:File &type:BackOne directory upCreate New FolderList ViewDetail ViewPreview File InfoPreview File ContentsRead-writeRead-onlyWrite-onlyInaccessibleSymlink to FileSymlink to DirectorySymlink to SpecialFileDirSpecialOpenSave As&Open&Save&Rename&DeleteR&eloadSort by &NameSort by &SizeSort by &Date&UnsortedSortShow &hidden filesthe filethe directorythe symlinkDelete %1<qt>Are you sure you wish to delete %1 "%2"?</qt>&Yes&NoNew Folder 1New FolderNew Folder %1Find DirectoryDirectoriesDirectory:Error%1
File not found.
Check path and filename.All Files (*.*)Open Select a DirectoryQ3LocalFsCould not read directory
%1Could not create directory
%1Could not remove file or directory
%1Could not rename
%1
to
%2Could not open
%1Could not write
%1Q3MainWindowLine upCustomize...Q3NetworkProtocolOperation stopped by the userQ3ProgressDialogCancelQ3TabDialogOKApplyHelpDefaultsCancelQ3TextEdit&Undo&RedoCu&t&Copy&PasteClearSelect AllQ3TitleBarSystemRestore upMinimizeRestore downMaximizeCloseContains commands to manipulate the windowPuts a minimized window back to normalMoves the window out of the wayPuts a maximized window back to normalMakes the window full screenCloses the windowDisplays the name of the window and contains controls to manipulate itQ3ToolBarMore...Q3UrlOperatorThe protocol `%1' is not supportedThe protocol `%1' does not support listing directoriesThe protocol `%1' does not support creating new directoriesThe protocol `%1' does not support removing files or directoriesThe protocol `%1' does not support renaming files or directoriesThe protocol `%1' does not support getting filesThe protocol `%1' does not support putting filesThe protocol `%1' does not support copying or moving files or directories(unknown)Q3Wizard&Cancel< &Back&Next >&Finish&HelpQAbstractSocketHost not foundConnection refusedConnection timed outOperation on socket is not supportedSocket operation timed outSocket is not connectedNetwork unreachableQAbstractSpinBox&Step upStep &down&Select AllQAccessibleButtonPressQApplicationQT_LAYOUT_DIRECTIONTranslate this string to the string 'LTR' in left-to-right languages or to 'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper widget layout.RTLExecutable '%1' requires Qt %2, found Qt %3.Incompatible Qt Library ErrorActivateActivates the program's main windowQAxSelectSelect ActiveX ControlOK&CancelCOM &Object:QCheckBoxUncheckCheckToggleQColorDialogHu&e:Hu&e:&Sat:&Sat:&Val:&Val:&Red:&Red:&Green:Bl&ue:A&lpha channel:Select ColorSelect Color&Basic colors&Custom colors&Add to Custom ColorsQComboBoxOpenOpenFalseFalseTrueTrueCloseCloseQCoreApplication%1: key is emptyQSystemSemaphore%1: key is empty%1: unable to make keyQSystemSemaphore%1: unable to make key%1: ftok failedQSystemSemaphore%1: ftok failed%1: already existsQSystemSemaphore%1: already exists%1: does not existQSystemSemaphore%1: does not exist%1: out of resourcesQSystemSemaphore%1: out of resources%1: unknown error %2QSystemSemaphore%1: unknown error %2QDB2DriverUnable to connectUnable to connectUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionUnable to set autocommitUnable to set autocommitQDB2ResultUnable to execute statementUnable to execute statementUnable to prepare statementUnable to prepare statementUnable to bind variableUnable to bind variableUnable to fetch record %1Unable to fetch record %1Unable to fetch nextUnable to fetch nextUnable to fetch firstUnable to fetch firstQDateTimeEditAMAMamamPMPMpmpmQDialQDialQDialSpeedoMeterSpeedoMeterSliderHandleSliderHandleQDialogWhat's This?What's This?DoneDoneQDialogButtonBoxOKOKSaveSave&Save&SaveOpenOpenCancelCancel&Cancel&CancelCloseClose&Close&CloseApplyApplyResetResetHelpHelpDon't SaveDon't SaveDiscardDiscard&Yes&YesYes to &AllYes to &All&No&NoN&o to AllN&o to AllSave AllSave AllAbortAbortRetryRetryIgnoreIgnoreRestore DefaultsRestore DefaultsClose without SavingClose without Saving&OK&OKQDirModelNameNameSizeSizeKindMatch OS X FinderKindTypeAll other platformsTypeDate ModifiedDate ModifiedQDockWidgetCloseCloseDockDockFloatFloatQDoubleSpinBoxMoreMoreLessLessQErrorMessage&Show this message again&Show this message again&OK&OKDebug Message:Debug Message:Warning:Warning:Fatal Error:Fatal Error:QFileDestination file existsDestination file existsWill not rename sequential file using block copyWill not rename sequential file using block copyCannot remove source fileCannot remove source fileCannot open %1 for inputCannot open %1 for inputCannot open for outputCannot open for outputFailure to write blockFailure to write blockCannot create %1 for outputCannot create %1 for outputQFileDialogAll Files (*)All Files (*)BackBackList ViewList ViewDetail ViewDetail ViewFileFileOpenOpenSave AsSave As&Open&Open&Save&SaveRecent PlacesRecent Places&Rename&Rename&Delete&DeleteShow &hidden filesShow &hidden filesNew FolderNew FolderFind DirectoryFind DirectoryDirectoriesDirectoriesAll Files (*.*)All Files (*.*)Directory:Directory:%1 already exists.
Do you want to replace it?%1 already exists.
Do you want to replace it?%1
File not found.
Please verify the correct file name was given.%1
File not found.
Please verify the correct file name was given.My ComputerMy ComputerParent DirectoryParent DirectoryFiles of type:Files of type:%1
Directory not found.
Please verify the correct directory name was given.%1
Directory not found.
Please verify the correct directory name was given.'%1' is write protected.
Do you want to delete it anyway?'%1' is write protected.
Do you want to delete it anyway?Are sure you want to delete '%1'?Are sure you want to delete '%1'?Could not delete directory.Could not delete directory.DriveDriveFile FolderMatch Windows ExplorerFile FolderFolderAll other platformsFolderAliasMac OS X FinderAliasShortcutAll other platformsShortcutUnknownUnknownShow Show ForwardForward&New Folder&New Folder&Choose&ChooseRemoveRemoveFile &name:File &name:Look in:Look in:Create New FolderCreate New FolderQFileSystemModel%1 TB%1 TB%1 GB%1 GB%1 MB%1 MB%1 KB%1 KB%1 bytes%1 bytesInvalid filenameInvalid filename<b>The name "%1" can not be used.</b><p>Try using another name, with fewer characters or no punctuations marks.<b>The name "%1" can not be used.</b><p>Try using another name, with fewer characters or no punctuations marks.NameNameSizeSizeKindMatch OS X FinderKindTypeAll other platformsTypeDate ModifiedDate ModifiedMy ComputerMy ComputerComputerComputer%1 byte(s)%1 byte(s)QFontDatabaseNormalNormalBoldBoldDemi BoldDemi BoldBlackBlackDemiDemiLightLightItalicItalicObliqueObliqueAnyAnyLatinLatinGreekGreekCyrillicCyrillicArmenianArmenianHebrewHebrewArabicArabicSyriacSyriacThaanaThaanaDevanagariDevanagariBengaliBengaliGurmukhiGurmukhiGujaratiGujaratiOriyaOriyaTamilTamilTeluguTeluguKannadaKannadaMalayalamMalayalamSinhalaSinhalaThaiThaiLaoLaoTibetanTibetanMyanmarMyanmarGeorgianGeorgianKhmerKhmerSimplified ChineseSimplified ChineseTraditional ChineseTraditional ChineseJapaneseJapaneseKoreanKoreanVietnameseVietnameseSymbolSymbolOghamOghamRunicRunicN'KoN'KoQFontDialog&Font&FontFont st&yleFont st&yle&Size&SizeEffectsEffectsStri&keoutStri&keout&Underline&UnderlineSampleSampleSelect FontSelect FontWr&iting SystemWr&iting SystemQFtpHost %1 foundHost %1 foundHost foundHost foundConnected to host %1Connected to host %1Connected to hostConnected to hostConnection to %1 closedConnection to %1 closedConnection closedConnection closedHost %1 not foundHost %1 not foundConnection refused to host %1Connection refused to host %1Connection timed out to host %1Connection timed out to host %1Unknown errorUnknown errorConnecting to host failed:
%1Connecting to host failed:
%1Login failed:
%1Login failed:
%1Listing directory failed:
%1Listing directory failed:
%1Changing directory failed:
%1Changing directory failed:
%1Downloading file failed:
%1Downloading file failed:
%1Uploading file failed:
%1Uploading file failed:
%1Removing file failed:
%1Removing file failed:
%1Creating directory failed:
%1Creating directory failed:
%1Removing directory failed:
%1Removing directory failed:
%1Not connectedNot connectedConnection refused for data connectionConnection refused for data connectionQHostInfoUnknown errorUnknown errorQHostInfoAgentHost not foundHost not foundUnknown address typeUnknown address typeUnknown errorUnknown errorNo host name givenNo host name givenInvalid hostnameInvalid hostnameQHttpConnection refusedConnection refusedHost %1 not foundHost %1 not foundWrong content lengthWrong content lengthHTTP request failedHTTP request failedHost %1 foundHost %1 foundHost foundHost foundConnected to host %1Connected to host %1Connected to hostConnected to hostConnection to %1 closedConnection to %1 closedConnection closedConnection closedUnknown errorUnknown errorRequest abortedRequest abortedNo server set to connect toNo server set to connect toServer closed connection unexpectedlyServer closed connection unexpectedlyInvalid HTTP response headerInvalid HTTP response headerUnknown authentication methodUnknown authentication methodInvalid HTTP chunked bodyInvalid HTTP chunked bodyError writing response to deviceError writing response to deviceProxy authentication requiredProxy authentication requiredAuthentication requiredAuthentication requiredProxy requires authenticationProxy requires authenticationHost requires authenticationHost requires authenticationData corruptedData corruptedSSL handshake failedSSL handshake failedUnknown protocol specifiedUnknown protocol specifiedConnection refused (or timed out)Connection refused (or timed out)HTTPS connection requested but SSL support not compiled inHTTPS connection requested but SSL support not compiled inQHttpSocketEngineDid not receive HTTP response from proxyDid not receive HTTP response from proxyError parsing authentication request from proxyError parsing authentication request from proxyAuthentication requiredAuthentication requiredProxy denied connectionProxy denied connectionError communicating with HTTP proxyError communicating with HTTP proxyProxy server not foundProxy server not foundProxy connection refusedProxy connection refusedProxy server connection timed outProxy server connection timed outProxy connection closed prematurelyProxy connection closed prematurelyQIBaseDriverError opening databaseError opening databaseCould not start transactionCould not start transactionUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionQIBaseResultUnable to create BLOBUnable to create BLOBUnable to write BLOBUnable to write BLOBUnable to open BLOBUnable to open BLOBUnable to read BLOBUnable to read BLOBCould not find arrayCould not find arrayCould not get array dataCould not get array dataCould not get query infoCould not get query infoCould not start transactionCould not start transactionUnable to commit transactionUnable to commit transactionCould not allocate statementCould not allocate statementCould not prepare statementCould not prepare statementCould not describe input statementCould not describe input statementCould not describe statementCould not describe statementUnable to close statementUnable to close statementUnable to execute queryUnable to execute queryCould not fetch next itemCould not fetch next itemCould not get statement infoCould not get statement infoQIODevicePermission deniedPermission deniedToo many open filesToo many open filesNo such file or directoryNo such file or directoryNo space left on deviceNo space left on deviceUnknown errorUnknown errorQInputContextXIMXIMFEPFEPXIM input methodXIM input methodWindows input methodWindows input methodMac OS X input methodMac OS X input methodS60 FEP input methodS60 FEP input methodQInputDialogEnter a value:Enter a value:QLibraryCould not mmap '%1': %2Could not mmap '%1': %2Plugin verification data mismatch in '%1'Plugin verification data mismatch in '%1'Could not unmap '%1': %2Could not unmap '%1': %2The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5]The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5]The plugin '%1' uses incompatible Qt library. Expected build key "%2", got "%3"The plugin '%1' uses incompatible Qt library. Expected build key "%2", got "%3"Unknown errorUnknown errorThe shared library was not found.The shared library was not found.The file '%1' is not a valid Qt plugin.The file '%1' is not a valid Qt plugin.The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.)The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.)Cannot load library %1: %2Cannot load library %1: %2Cannot unload library %1: %2Cannot unload library %1: %2Cannot resolve symbol "%1" in %2: %3Cannot resolve symbol "%1" in %2: %3QLineEditSelect AllSelect All&Undo&Undo&Redo&RedoCu&tCu&t&Copy&Copy&Paste&PasteDeleteDeleteQLocalServer%1: Name error%1: Name error%1: Permission denied%1: Permission denied%1: Address in use%1: Address in use%1: Unknown error %2%1: Unknown error %2QLocalSocket%1: Connection refused%1: Connection refused%1: Remote closed%1: Remote closed%1: Invalid name%1: Invalid name%1: Socket access error%1: Socket access error%1: Socket resource error%1: Socket resource error%1: Socket operation timed out%1: Socket operation timed out%1: Datagram too large%1: Datagram too large%1: Connection error%1: Connection error%1: The socket operation is not supported%1: The socket operation is not supported%1: Unknown error%1: Unknown error%1: Unknown error %2%1: Unknown error %2QMYSQLDriverUnable to open database 'Unable to open database 'Unable to connectUnable to connectUnable to begin transactionUnable to begin transactionUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionQMYSQLResultUnable to fetch dataUnable to fetch dataUnable to execute queryUnable to execute queryUnable to store resultUnable to store resultUnable to prepare statementUnable to prepare statementUnable to reset statementUnable to reset statementUnable to bind valueUnable to bind valueUnable to execute statementUnable to execute statementUnable to bind outvaluesUnable to bind outvaluesUnable to store statement resultsUnable to store statement resultsUnable to execute next queryUnable to execute next queryUnable to store next resultUnable to store next resultQMdiArea(Untitled)(Untitled)QMdiSubWindow%1 - [%2]%1 - [%2]CloseCloseMinimizeMinimizeRestore DownRestore Down&Restore&Restore&Move&Move&Size&SizeMi&nimizeMi&nimizeMa&ximizeMa&ximizeStay on &TopStay on &Top&Close&CloseMaximizeMaximizeUnshadeUnshadeShadeShadeRestoreRestoreHelpHelpMenuMenu- [%1]- [%1]QMenuCloseCloseOpenOpenExecuteExecuteQMenuBarActionsActionsQMessageBoxOKOK<h3>About Qt</h3><p>This program uses Qt version %1.</p><h3>About Qt</h3><p>This program uses Qt version %1.</p><p>Qt is a C++ toolkit for cross-platform application development.</p><p>Qt provides single-source portability across MS Windows, Mac OS X, Linux, and all major commercial Unix variants. Qt is also available for embedded devices as Qt for Embedded Linux and Qt for Windows CE.</p><p>Qt is available under three different licensing options designed to accommodate the needs of our various users.</p><p>Qt licensed under our commercial license agreement is appropriate for development of proprietary/commercial software where you do not want to share any source code with third parties or otherwise cannot comply with the terms of the GNU LGPL version 2.1 or GNU GPL version 3.0.</p><p>Qt licensed under the GNU LGPL version 2.1 is appropriate for the development of Qt applications (proprietary or open source) provided you can comply with the terms and conditions of the GNU LGPL version 2.1.</p><p>Qt licensed under the GNU General Public License version 3.0 is appropriate for the development of Qt applications where you wish to use such applications in combination with software subject to the terms of the GNU GPL version 3.0 or where you are otherwise willing to comply with the terms of the GNU GPL version 3.0.</p><p>Please see <a href="http://qt.nokia.com/products/licensing">qt.nokia.com/products/licensing</a> for an overview of Qt licensing.</p><p>Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).</p><p>Qt is a Nokia product. See <a href="http://qt.nokia.com/">qt.nokia.com</a> for more information.</p><p>Qt is a C++ toolkit for cross-platform application development.</p><p>Qt provides single-source portability across MS Windows, Mac OS X, Linux, and all major commercial Unix variants. Qt is also available for embedded devices as Qt for Embedded Linux and Qt for Windows CE.</p><p>Qt is available under three different licensing options designed to accommodate the needs of our various users.</p><p>Qt licensed under our commercial license agreement is appropriate for development of proprietary/commercial software where you do not want to share any source code with third parties or otherwise cannot comply with the terms of the GNU LGPL version 2.1 or GNU GPL version 3.0.</p><p>Qt licensed under the GNU LGPL version 2.1 is appropriate for the development of Qt applications (proprietary or open source) provided you can comply with the terms and conditions of the GNU LGPL version 2.1.</p><p>Qt licensed under the GNU General Public License version 3.0 is appropriate for the development of Qt applications where you wish to use such applications in combination with software subject to the terms of the GNU GPL version 3.0 or where you are otherwise willing to comply with the terms of the GNU GPL version 3.0.</p><p>Please see <a href="http://qt.nokia.com/products/licensing">qt.nokia.com/products/licensing</a> for an overview of Qt licensing.</p><p>Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).</p><p>Qt is a Nokia product. See <a href="http://qt.nokia.com/">qt.nokia.com</a> for more information.</p>About QtAbout QtHelpHelpShow Details...Show Details...Hide Details...Hide Details...QMultiInputContextSelect IMSelect IMQMultiInputContextPluginMultiple input method switcherMultiple input method switcherMultiple input method switcher that uses the context menu of the text widgetsMultiple input method switcher that uses the context menu of the text widgetsQNativeSocketEngineThe remote host closed the connectionThe remote host closed the connectionNetwork operation timed outNetwork operation timed outOut of resourcesOut of resourcesUnsupported socket operationUnsupported socket operationProtocol type not supportedProtocol type not supportedInvalid socket descriptorInvalid socket descriptorNetwork unreachableNetwork unreachablePermission deniedPermission deniedConnection timed outConnection timed outConnection refusedConnection refusedThe bound address is already in useThe bound address is already in useThe address is not availableThe address is not availableThe address is protectedThe address is protectedUnable to send a messageUnable to send a messageUnable to receive a messageUnable to receive a messageUnable to writeUnable to writeNetwork errorNetwork errorAnother socket is already listening on the same portAnother socket is already listening on the same portUnable to initialize non-blocking socketUnable to initialize non-blocking socketUnable to initialize broadcast socketUnable to initialize broadcast socketAttempt to use IPv6 socket on a platform with no IPv6 supportAttempt to use IPv6 socket on a platform with no IPv6 supportHost unreachableHost unreachableDatagram was too large to sendDatagram was too large to sendOperation on non-socketOperation on non-socketUnknown errorUnknown errorThe proxy type is invalid for this operationThe proxy type is invalid for this operationQNetworkAccessCacheBackendError opening %1Error opening %1QNetworkAccessDebugPipeBackendWrite error writing to %1: %2Write error writing to %1: %2QNetworkAccessFileBackendRequest for opening non-local file %1Request for opening non-local file %1Error opening %1: %2Error opening %1: %2Write error writing to %1: %2Write error writing to %1: %2Cannot open %1: Path is a directoryCannot open %1: Path is a directoryRead error reading from %1: %2Read error reading from %1: %2QNetworkAccessFtpBackendNo suitable proxy foundNo suitable proxy foundCannot open %1: is a directoryCannot open %1: is a directoryLogging in to %1 failed: authentication requiredLogging in to %1 failed: authentication requiredError while downloading %1: %2Error while downloading %1: %2Error while uploading %1: %2Error while uploading %1: %2QNetworkAccessHttpBackendNo suitable proxy foundNo suitable proxy foundQNetworkReplyError downloading %1 - server replied: %2Error downloading %1 - server replied: %2Protocol "%1" is unknownProtocol "%1" is unknownQNetworkReplyImplOperation canceledOperation canceledQOCIDriverUnable to logonUnable to logonUnable to initializeQOCIDriverUnable to initializeUnable to begin transactionUnable to begin transactionUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionQOCIResultUnable to bind column for batch executeUnable to bind column for batch executeUnable to execute batch statementUnable to execute batch statementUnable to goto nextUnable to goto nextUnable to alloc statementUnable to alloc statementUnable to prepare statementUnable to prepare statementUnable to get statement typeUnable to get statement typeUnable to bind valueUnable to bind valueUnable to execute statementUnable to execute statementQODBCDriverUnable to connectUnable to connectUnable to disable autocommitUnable to disable autocommitUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionUnable to enable autocommitUnable to enable autocommitUnable to connect - Driver doesn't support all functionality requiredUnable to connect - Driver doesn't support all functionality requiredQODBCResultQODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configurationQODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configurationUnable to execute statementUnable to execute statementUnable to fetch nextUnable to fetch nextUnable to prepare statementUnable to prepare statementUnable to bind variableUnable to bind variableUnable to fetch lastUnable to fetch lastUnable to fetchUnable to fetchUnable to fetch firstUnable to fetch firstUnable to fetch previousUnable to fetch previousQObjectInvalid hostnameInvalid hostnameOperation not supported on %1Operation not supported on %1Invalid URI: %1Invalid URI: %1Socket error on %1: %2Socket error on %1: %2Remote host closed the connection prematurely on %1Remote host closed the connection prematurely on %1No host name givenNo host name givenQPPDOptionsModelNameNameValueValueQPSQLDriverUnable to connectUnable to connectCould not begin transactionCould not begin transactionCould not commit transactionCould not commit transactionCould not rollback transactionCould not rollback transactionUnable to subscribeUnable to subscribeUnable to unsubscribeUnable to unsubscribeQPSQLResultUnable to create queryUnable to create queryUnable to prepare statementUnable to prepare statementQPageSetupWidgetCentimeters (cm)Centimeters (cm)Millimeters (mm)Millimeters (mm)Inches (in)Inches (in)Points (pt)Points (pt)FormFormPaperPaperPage size:Page size:Width:Width:Height:Height:Paper source:Paper source:OrientationOrientationPortraitPortraitLandscapeLandscapeReverse landscapeReverse landscapeReverse portraitReverse portraitMarginsMarginstop margintop marginleft marginleft marginright marginright marginbottom marginbottom marginQPluginLoaderUnknown errorUnknown errorThe plugin was not loaded.The plugin was not loaded.QPrintDialoglocally connectedlocally connectedAliases: %1Aliases: %1unknownunknownOKOKPrint allPrint allPrint rangePrint rangeA0 (841 x 1189 mm)A0 (841 x 1189 mm)A1 (594 x 841 mm)A1 (594 x 841 mm)A2 (420 x 594 mm)A2 (420 x 594 mm)A3 (297 x 420 mm)A3 (297 x 420 mm)A5 (148 x 210 mm)A5 (148 x 210 mm)A6 (105 x 148 mm)A6 (105 x 148 mm)A7 (74 x 105 mm)A7 (74 x 105 mm)A8 (52 x 74 mm)A8 (52 x 74 mm)A9 (37 x 52 mm)A9 (37 x 52 mm)B0 (1000 x 1414 mm)B0 (1000 x 1414 mm)B1 (707 x 1000 mm)B1 (707 x 1000 mm)B2 (500 x 707 mm)B2 (500 x 707 mm)B3 (353 x 500 mm)B3 (353 x 500 mm)B4 (250 x 353 mm)B4 (250 x 353 mm)B6 (125 x 176 mm)B6 (125 x 176 mm)B7 (88 x 125 mm)B7 (88 x 125 mm)B8 (62 x 88 mm)B8 (62 x 88 mm)B9 (44 x 62 mm)B9 (44 x 62 mm)B10 (31 x 44 mm)B10 (31 x 44 mm)C5E (163 x 229 mm)C5E (163 x 229 mm)DLE (110 x 220 mm)DLE (110 x 220 mm)Folio (210 x 330 mm)Folio (210 x 330 mm)Ledger (432 x 279 mm)Ledger (432 x 279 mm)Tabloid (279 x 432 mm)Tabloid (279 x 432 mm)US Common #10 Envelope (105 x 241 mm)US Common #10 Envelope (105 x 241 mm)A4 (210 x 297 mm, 8.26 x 11.7 inches)A4 (210 x 297 mm, 8.26 x 11.7 inches)B5 (176 x 250 mm, 6.93 x 9.84 inches)B5 (176 x 250 mm, 6.93 x 9.84 inches)Executive (7.5 x 10 inches, 191 x 254 mm)Executive (7.5 x 10 inches, 191 x 254 mm)Legal (8.5 x 14 inches, 216 x 356 mm)Legal (8.5 x 14 inches, 216 x 356 mm)Letter (8.5 x 11 inches, 216 x 279 mm)Letter (8.5 x 11 inches, 216 x 279 mm)Print selectionPrint selectionPrintPrintPrint To File ...Print To File ...File %1 is not writable.
Please choose a different file name.File %1 is not writable.
Please choose a different file name.%1 already exists.
Do you want to overwrite it?%1 already exists.
Do you want to overwrite it?File existsFile exists<qt>Do you want to overwrite it?</qt><qt>Do you want to overwrite it?</qt>%1 is a directory.
Please choose a different file name.%1 is a directory.
Please choose a different file name.The 'From' value cannot be greater than the 'To' value.The 'From' value cannot be greater than the 'To' value.A0A0A1A1A2A2A3A3A4A4A5A5A6A6A7A7A8A8A9A9B0B0B1B1B2B2B3B3B4B4B5B5B6B6B7B7B8B8B9B9B10B10C5EC5EDLEDLEExecutiveExecutiveFolioFolioLedgerLedgerLegalLegalLetterLetterTabloidTabloidUS Common #10 EnvelopeUS Common #10 EnvelopeCustomCustom&Options >>&Options >>&Options <<&Options <<Print to File (PDF)Print to File (PDF)Print to File (Postscript)Print to File (Postscript)Local fileLocal fileWrite %1 fileWrite %1 file&Print&PrintQPrintPreviewDialog%1%%1%Print PreviewPrint PreviewNext pageNext pagePrevious pagePrevious pageFirst pageFirst pageLast pageLast pageFit widthFit widthFit pageFit pageZoom inZoom inZoom outZoom outPortraitPortraitLandscapeLandscapeShow single pageShow single pageShow facing pagesShow facing pagesShow overview of all pagesShow overview of all pagesPrintPrintPage setupPage setupCloseCloseExport to PDFExport to PDFExport to PostScriptExport to PostScriptPage SetupPage SetupQPrintPropertiesWidgetFormFormPagePageAdvancedAdvancedQPrintSettingsOutputFormFormCopiesCopiesPrint rangePrint rangePrint allPrint allPages fromPages fromtotoSelectionSelectionOutput SettingsOutput SettingsCopies:Copies:CollateCollateReverseReverseOptionsOptionsColor ModeColor ModeColorColorGrayscaleGrayscaleDuplex PrintingDuplex PrintingNoneNoneLong sideLong sideShort sideShort sideQPrintWidgetFormFormPrinterPrinter&Name:&Name:P&ropertiesP&ropertiesLocation:Location:PreviewPreviewType:Type:Output &file:Output &file:......QProcessCould not open input redirection for readingCould not open input redirection for readingCould not open output redirection for writingCould not open output redirection for writingResource error (fork failure): %1Resource error (fork failure): %1Process operation timed outProcess operation timed outError reading from processError reading from processError writing to processError writing to processProcess crashedProcess crashedNo program definedNo program definedProcess failed to start: %1Process failed to start: %1QProgressDialogCancelCancelQPushButtonOpenOpenQRadioButtonCheckCheckQRegExpno error occurredno error occurreddisabled feature useddisabled feature usedbad char class syntaxbad char class syntaxbad lookahead syntaxbad lookahead syntaxbad repetition syntaxbad repetition syntaxinvalid octal valueinvalid octal valuemissing left delimmissing left delimunexpected endunexpected endmet internal limitmet internal limitinvalid intervalinvalid intervalinvalid categoryinvalid categoryQSQLite2DriverError opening databaseError opening databaseUnable to begin transactionUnable to begin transactionUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionQSQLite2ResultUnable to fetch resultsUnable to fetch resultsUnable to execute statementUnable to execute statementQSQLiteDriverError opening databaseError opening databaseError closing databaseError closing databaseUnable to begin transactionUnable to begin transactionUnable to commit transactionUnable to commit transactionUnable to rollback transactionUnable to rollback transactionQSQLiteResultUnable to fetch rowUnable to fetch rowUnable to execute statementUnable to execute statementUnable to reset statementUnable to reset statementUnable to bind parametersUnable to bind parametersParameter count mismatchParameter count mismatchNo queryNo queryQScriptBreakpointsModelIDIDLocationLocationConditionConditionIgnore-countIgnore-countSingle-shotSingle-shotHit-countHit-countQScriptBreakpointsWidgetNewNewDeleteDeleteQScriptDebuggerGo to LineGo to LineLine:Line:InterruptInterruptShift+F5Shift+F5ContinueContinueF5F5Step IntoStep IntoF11F11Step OverStep OverF10F10Step OutStep OutShift+F11Shift+F11Run to CursorRun to CursorCtrl+F10Ctrl+F10Run to New ScriptRun to New ScriptToggle BreakpointToggle BreakpointF9F9Clear Debug OutputClear Debug OutputClear Error LogClear Error LogClear ConsoleClear Console&Find in Script...&Find in Script...Ctrl+FCtrl+FFind &NextFind &NextF3F3Find &PreviousFind &PreviousShift+F3Shift+F3Ctrl+GCtrl+GDebugDebugQScriptDebuggerCodeFinderWidgetCloseClosePreviousPreviousNextNextCase SensitiveCase SensitiveWhole wordsWhole words<img src=":/qt/scripttools/debugging/images/wrap.png"> Search wrapped<img src=":/qt/scripttools/debugging/images/wrap.png"> Search wrappedQScriptDebuggerLocalsModelNameNameValueValueQScriptDebuggerStackModelLevelLevelNameNameLocationLocationQScriptEditToggle BreakpointToggle BreakpointDisable BreakpointDisable BreakpointEnable BreakpointEnable BreakpointBreakpoint Condition:Breakpoint Condition:QScriptEngineDebuggerLoaded ScriptsLoaded ScriptsBreakpointsBreakpointsStackStackLocalsLocalsConsoleConsoleDebug OutputDebug OutputError LogError LogSearchSearchViewViewQt Script DebuggerQt Script DebuggerQScriptNewBreakpointWidgetCloseCloseQScrollBarScroll hereScroll hereLeft edgeLeft edgeTopTopRight edgeRight edgeBottomBottomPage leftPage leftPage upPage upPage rightPage rightPage downPage downScroll leftScroll leftScroll upScroll upScroll rightScroll rightScroll downScroll downLine upLine upPositionPositionLine downLine downQSharedMemory%1: create size is less then 0%1: create size is less then 0%1: unable to lock%1: unable to lock%1: unable to unlock%1: unable to unlock%1: permission denied%1: permission denied%1: already exists%1: already exists%1: doesn't exists%1: doesn't exists%1: out of resources%1: out of resources%1: unknown error %2%1: unknown error %2%1: key is empty%1: key is empty%1: ftok failed%1: ftok failed%1: unable to make key%1: unable to make key%1: doesn't exist%1: doesn't exist%1: UNIX key file doesn't exist%1: UNIX key file doesn't exist%1: system-imposed size restrictions%1: system-imposed size restrictions%1: not attached%1: not attached%1: invalid size%1: invalid size%1: key error%1: key error%1: size query failed%1: size query failed%1: unable to set key on lock%1: unable to set key on lockQShortcutSpaceSpaceEscEscTabTabBacktabBacktabBackspaceBackspaceReturnReturnEnterEnterInsInsDelDelPausePausePrintPrintSysReqSysReqHomeHomeEndEndLeftLeftUpUpRightRightDownDownPgUpPgUpPgDownPgDownCapsLockCapsLockNumLockNumLockScrollLockScrollLockMenuMenuHelpHelpBackBackForwardForwardStopStopRefreshRefreshVolume DownVolume DownVolume MuteVolume MuteVolume UpVolume UpBass BoostBass BoostBass UpBass UpBass DownBass DownTreble UpTreble UpTreble DownTreble DownMedia PlayMedia PlayMedia StopMedia StopMedia PreviousMedia PreviousMedia NextMedia NextMedia RecordMedia RecordFavoritesFavoritesSearchSearchStandbyStandbyOpen URLOpen URLLaunch MailLaunch MailLaunch MediaLaunch MediaLaunch (0)Launch (0)Launch (1)Launch (1)Launch (2)Launch (2)Launch (3)Launch (3)Launch (4)Launch (4)Launch (5)Launch (5)Launch (6)Launch (6)Launch (7)Launch (7)Launch (8)Launch (8)Launch (9)Launch (9)Launch (A)Launch (A)Launch (B)Launch (B)Launch (C)Launch (C)Launch (D)Launch (D)Launch (E)Launch (E)Launch (F)Launch (F)Monitor Brightness UpMonitor Brightness UpMonitor Brightness DownMonitor Brightness DownKeyboard Light On/OffKeyboard Light On/OffKeyboard Brightness UpKeyboard Brightness UpKeyboard Brightness DownKeyboard Brightness DownPower OffPower OffWake UpWake UpEjectEjectScreensaverScreensaverWWWWWWSleepSleepLightBulbLightBulbShopShopHistoryHistoryAdd FavoriteAdd FavoriteHot LinksHot LinksAdjust BrightnessAdjust BrightnessFinanceFinanceCommunityCommunityAudio RewindAudio RewindBack ForwardBack ForwardApplication LeftApplication LeftApplication RightApplication RightBookBookCDCDCalculatorCalculatorClearClearClear GrabClear GrabCloseCloseCopyCopyCutCutDisplayDisplayDOSDOSDocumentsDocumentsSpreadsheetSpreadsheetBrowserBrowserGameGameGoGoiTouchiTouchLogoffLogoffMarketMarketMeetingMeetingKeyboard MenuKeyboard MenuMenu PBMenu PBMy SitesMy SitesNewsNewsHome OfficeHome OfficeOptionOptionPastePastePhonePhoneReplyReplyReloadReloadRotate WindowsRotate WindowsRotation PBRotation PBRotation KBRotation KBSaveSaveSendSendSpellcheckerSpellcheckerSplit ScreenSplit ScreenSupportSupportTask PanelTask PanelTerminalTerminalToolsToolsTravelTravelVideoVideoWord ProcessorWord ProcessorXFerXFerZoom InZoom InZoom OutZoom OutAwayAwayMessengerMessengerWebCamWebCamMail ForwardMail ForwardPicturesPicturesMusicMusicBatteryBatteryBluetoothBluetoothWirelessWirelessUltra Wide BandUltra Wide BandAudio ForwardAudio ForwardAudio RepeatAudio RepeatAudio Random PlayAudio Random PlaySubtitleSubtitleAudio Cycle TrackAudio Cycle TrackTimeTimeViewViewTop MenuTop MenuSuspendSuspendHibernateHibernatePrint ScreenPrint ScreenPage UpPage UpPage DownPage DownCaps LockCaps LockNum LockNum LockNumber LockNumber LockScroll LockScroll LockInsertInsertDeleteDeleteEscapeEscapeSystem RequestSystem RequestSelectSelectYesYesNoNoContext1Context1Context2Context2Context3Context3Context4Context4CallCallHangupHangupFlipFlipCtrlCtrlShiftShiftAltAltMetaMeta++F%1F%1Home PageHome PageQSliderPage leftPage leftPage upPage upPositionPositionPage rightPage rightPage downPage downQSocks5SocketEngineConnection to proxy refusedConnection to proxy refusedConnection to proxy closed prematurelyConnection to proxy closed prematurelyProxy host not foundProxy host not foundConnection to proxy timed outConnection to proxy timed outProxy authentication failedProxy authentication failedProxy authentication failed: %1Proxy authentication failed: %1SOCKS version 5 protocol errorSOCKS version 5 protocol errorGeneral SOCKSv5 server failureGeneral SOCKSv5 server failureConnection not allowed by SOCKSv5 serverConnection not allowed by SOCKSv5 serverTTL expiredTTL expiredSOCKSv5 command not supportedSOCKSv5 command not supportedAddress type not supportedAddress type not supportedUnknown SOCKSv5 proxy error code 0x%1Unknown SOCKSv5 proxy error code 0x%1Network operation timed outNetwork operation timed outQSoftKeyManagerOkOkSelectSelectDoneDoneOptionsOptionsCancelCancelExitExitQSpinBoxMoreMoreLessLessQSqlDeleteDeleteDelete this record?Delete this record?YesYesNoNoInsertInsertUpdateUpdateSave edits?Save edits?CancelCancelConfirmConfirmCancel your edits?Cancel your edits?QSslSocketUnable to write data: %1Unable to write data: %1Unable to decrypt data: %1Unable to decrypt data: %1Error while reading: %1Error while reading: %1Error during SSL handshake: %1Error during SSL handshake: %1Error creating SSL context (%1)Error creating SSL context (%1)Invalid or empty cipher list (%1)Invalid or empty cipher list (%1)Private key does not certify public key, %1Private key does not certify public key, %1Error creating SSL session, %1Error creating SSL session, %1Error creating SSL session: %1Error creating SSL session: %1Cannot provide a certificate with no key, %1Cannot provide a certificate with no key, %1Error loading local certificate, %1Error loading local certificate, %1Error loading private key, %1Error loading private key, %1No errorNo errorThe issuer certificate could not be foundThe issuer certificate could not be foundThe certificate signature could not be decryptedThe certificate signature could not be decryptedThe public key in the certificate could not be readThe public key in the certificate could not be readThe signature of the certificate is invalidThe signature of the certificate is invalidThe certificate is not yet validThe certificate is not yet validThe certificate has expiredThe certificate has expiredThe certificate's notBefore field contains an invalid timeThe certificate's notBefore field contains an invalid timeThe certificate's notAfter field contains an invalid timeThe certificate's notAfter field contains an invalid timeThe certificate is self-signed, and untrustedThe certificate is self-signed, and untrustedThe root certificate of the certificate chain is self-signed, and untrustedThe root certificate of the certificate chain is self-signed, and untrustedThe issuer certificate of a locally looked up certificate could not be foundThe issuer certificate of a locally looked up certificate could not be foundNo certificates could be verifiedNo certificates could be verifiedOne of the CA certificates is invalidOne of the CA certificates is invalidThe basicConstraints path length parameter has been exceededThe basicConstraints path length parameter has been exceededThe supplied certificate is unsuitable for this purposeThe supplied certificate is unsuitable for this purposeThe root CA certificate is not trusted for this purposeThe root CA certificate is not trusted for this purposeThe root CA certificate is marked to reject the specified purposeThe root CA certificate is marked to reject the specified purposeThe current candidate issuer certificate was rejected because its subject name did not match the issuer name of the current certificateThe current candidate issuer certificate was rejected because its subject name did not match the issuer name of the current certificateThe current candidate issuer certificate was rejected because its issuer name and serial number was present and did not match the authority key identifier of the current certificateThe current candidate issuer certificate was rejected because its issuer name and serial number was present and did not match the authority key identifier of the current certificateThe peer did not present any certificateThe peer did not present any certificateThe host name did not match any of the valid hosts for this certificateThe host name did not match any of the valid hosts for this certificateUnknown errorUnknown errorQStateMachineMissing initial state in compound state '%1'Missing initial state in compound state '%1'Missing default state in history state '%1'Missing default state in history state '%1'No common ancestor for targets and source of transition from state '%1'No common ancestor for targets and source of transition from state '%1'Unknown errorUnknown errorQSystemSemaphore%1: does not exist%1: does not exist%1: out of resources%1: out of resources%1: permission denied%1: permission denied%1: already exists%1: already exists%1: unknown error %2%1: unknown error %2QTDSDriverUnable to open connectionUnable to open connectionUnable to use databaseUnable to use databaseQTabBarScroll LeftScroll LeftScroll RightScroll RightQTcpServerOperation on socket is not supportedOperation on socket is not supportedQTextControl&Undo&Undo&Redo&RedoCu&tCu&t&Copy&CopyCopy &Link LocationCopy &Link Location&Paste&PasteDeleteDeleteSelect AllSelect AllQToolButtonPressPressOpenOpenQUdpSocketThis platform does not support IPv6This platform does not support IPv6QUndoGroupUndoUndoRedoRedoQUndoModel<empty><empty>QUndoStackUndoUndoRedoRedoQUnicodeControlCharacterMenuLRM Left-to-right markLRM Left-to-right markRLM Right-to-left markRLM Right-to-left markZWJ Zero width joinerZWJ Zero width joinerZWNJ Zero width non-joinerZWNJ Zero width non-joinerZWSP Zero width spaceZWSP Zero width spaceLRE Start of left-to-right embeddingLRE Start of left-to-right embeddingRLE Start of right-to-left embeddingRLE Start of right-to-left embeddingLRO Start of left-to-right overrideLRO Start of left-to-right overrideRLO Start of right-to-left overrideRLO Start of right-to-left overridePDF Pop directional formattingPDF Pop directional formattingInsert Unicode control characterInsert Unicode control characterQWebFrameRequest cancelledRequest cancelledRequest blockedRequest blockedCannot show URLCannot show URLFrame load interrupted by policy changeFrame load interrupted by policy changeCannot show mimetypeCannot show mimetypeFile does not existFile does not existQWebPageSubmitdefault label for Submit buttons in forms on web pagesSubmitSubmitSubmit (input element) alt text for <input> elements with no alt, title, or valueSubmitResetdefault label for Reset buttons in forms on web pagesResetChoose Filetitle for file button used in HTML formsChoose FileNo file selectedtext to display in file button used in HTML forms when no file is selectedNo file selectedOpen in New WindowOpen in New Window context menu itemOpen in New WindowSave Link...Download Linked File context menu itemSave Link...Copy LinkCopy Link context menu itemCopy LinkOpen ImageOpen Image in New Window context menu itemOpen ImageSave ImageDownload Image context menu itemSave ImageCopy ImageCopy Link context menu itemCopy ImageOpen FrameOpen Frame in New Window context menu itemOpen FrameCopyCopy context menu itemCopyGo BackBack context menu itemGo BackGo ForwardForward context menu itemGo ForwardStopStop context menu itemStopReloadReload context menu itemReloadCutCut context menu itemCutPastePaste context menu itemPasteNo Guesses FoundNo Guesses Found context menu itemNo Guesses FoundIgnoreIgnore Spelling context menu itemIgnoreAdd To DictionaryLearn Spelling context menu itemAdd To DictionarySearch The WebSearch The Web context menu itemSearch The WebLook Up In DictionaryLook Up in Dictionary context menu itemLook Up In DictionaryOpen LinkOpen Link context menu itemOpen LinkIgnoreIgnore Grammar context menu itemIgnoreSpellingSpelling and Grammar context sub-menu itemSpellingShow Spelling and Grammarmenu item titleShow Spelling and GrammarHide Spelling and Grammarmenu item titleHide Spelling and GrammarCheck SpellingCheck spelling context menu itemCheck SpellingCheck Spelling While TypingCheck spelling while typing context menu itemCheck Spelling While TypingCheck Grammar With SpellingCheck grammar with spelling context menu itemCheck Grammar With SpellingFontsFont context sub-menu itemFontsBoldBold context menu itemBoldItalicItalic context menu itemItalicUnderlineUnderline context menu itemUnderlineOutlineOutline context menu itemOutlineDirectionWriting direction context sub-menu itemDirectionText DirectionText direction context sub-menu itemText DirectionDefaultDefault writing direction context menu itemDefaultLeft to RightLeft to Right context menu itemLeft to RightRight to LeftRight to Left context menu itemRight to LeftLoading...Media controller status message when the media is loadingLoading...Live BroadcastMedia controller status message when watching a live broadcastLive BroadcastAudio ElementMedia controller elementAudio ElementVideo ElementMedia controller elementVideo ElementMute ButtonMedia controller elementMute ButtonUnmute ButtonMedia controller elementUnmute ButtonPlay ButtonMedia controller elementPlay ButtonPause ButtonMedia controller elementPause ButtonSliderMedia controller elementSliderSlider ThumbMedia controller elementSlider ThumbRewind ButtonMedia controller elementRewind ButtonReturn to Real-time ButtonMedia controller elementReturn to Real-time ButtonElapsed TimeMedia controller elementElapsed TimeRemaining TimeMedia controller elementRemaining TimeStatus DisplayMedia controller elementStatus DisplayFullscreen ButtonMedia controller elementFullscreen ButtonSeek Forward ButtonMedia controller elementSeek Forward ButtonSeek Back ButtonMedia controller elementSeek Back ButtonAudio element playback controls and status displayMedia controller elementAudio element playback controls and status displayVideo element playback controls and status displayMedia controller elementVideo element playback controls and status displayMute audio tracksMedia controller elementMute audio tracksUnmute audio tracksMedia controller elementUnmute audio tracksBegin playbackMedia controller elementBegin playbackPause playbackMedia controller elementPause playbackMovie time scrubberMedia controller elementMovie time scrubberMovie time scrubber thumbMedia controller elementMovie time scrubber thumbRewind movieMedia controller elementRewind movieReturn streaming movie to real-timeMedia controller elementReturn streaming movie to real-timeCurrent movie timeMedia controller elementCurrent movie timeRemaining movie timeMedia controller elementRemaining movie timeCurrent movie statusMedia controller elementCurrent movie statusPlay movie in full-screen modeMedia controller elementPlay movie in full-screen modeSeek quickly backMedia controller elementSeek quickly backSeek quickly forwardMedia controller elementSeek quickly forwardIndefinite timeMedia time descriptionIndefinite time%1 days %2 hours %3 minutes %4 secondsMedia time description%1 days %2 hours %3 minutes %4 seconds%1 hours %2 minutes %3 secondsMedia time description%1 hours %2 minutes %3 seconds%1 minutes %2 secondsMedia time description%1 minutes %2 seconds%1 secondsMedia time description%1 secondsInspectInspect Element context menu itemInspectNo recent searchesLabel for only item in menu that appears when clicking on the search field image, when no searches have been performedNo recent searchesRecent searcheslabel for first item in the menu that appears when clicking on the search field image, used as embedded menu titleRecent searchesClear recent searchesmenu item in Recent Searches menu that empties menu's contentsClear recent searchesUnknownUnknown filesize FTP directory listing itemUnknownWeb Inspector - %2Web Inspector - %2%1 (%2x%3 pixels)Title string for images%1 (%2x%3 pixels)Bad HTTP requestBad HTTP requestThis is a searchable index. Enter search keywords: text that appears at the start of nearly-obsolete web pages in the form of a 'searchable index'This is a searchable index. Enter search keywords: Scroll hereScroll hereLeft edgeLeft edgeTopTopRight edgeRight edgeBottomBottomPage leftPage leftPage upPage upPage rightPage rightPage downPage downScroll leftScroll leftScroll upScroll upScroll rightScroll rightScroll downScroll down%n file(s)number of chosen file%n file(s)%n file(s)JavaScript Alert - %1JavaScript Alert - %1JavaScript Confirm - %1JavaScript Confirm - %1JavaScript Prompt - %1JavaScript Prompt - %1JavaScript Problem - %1JavaScript Problem - %1The script on this page appears to have a problem. Do you want to stop the script?The script on this page appears to have a problem. Do you want to stop the script?Move the cursor to the next characterMove the cursor to the next characterMove the cursor to the previous characterMove the cursor to the previous characterMove the cursor to the next wordMove the cursor to the next wordMove the cursor to the previous wordMove the cursor to the previous wordMove the cursor to the next lineMove the cursor to the next lineMove the cursor to the previous lineMove the cursor to the previous lineMove the cursor to the start of the lineMove the cursor to the start of the lineMove the cursor to the end of the lineMove the cursor to the end of the lineMove the cursor to the start of the blockMove the cursor to the start of the blockMove the cursor to the end of the blockMove the cursor to the end of the blockMove the cursor to the start of the documentMove the cursor to the start of the documentMove the cursor to the end of the documentMove the cursor to the end of the documentSelect allSelect allSelect to the next characterSelect to the next characterSelect to the previous characterSelect to the previous characterSelect to the next wordSelect to the next wordSelect to the previous wordSelect to the previous wordSelect to the next lineSelect to the next lineSelect to the previous lineSelect to the previous lineSelect to the start of the lineSelect to the start of the lineSelect to the end of the lineSelect to the end of the lineSelect to the start of the blockSelect to the start of the blockSelect to the end of the blockSelect to the end of the blockSelect to the start of the documentSelect to the start of the documentSelect to the end of the documentSelect to the end of the documentDelete to the start of the wordDelete to the start of the wordDelete to the end of the wordDelete to the end of the wordInsert a new paragraphInsert a new paragraphInsert a new lineInsert a new linePaste and Match StylePaste and Match StyleRemove formattingRemove formattingStrikethroughStrikethroughSubscriptSubscriptSuperscriptSuperscriptInsert Bulleted ListInsert Bulleted ListInsert Numbered ListInsert Numbered ListIndentIndentOutdentOutdentCenterCenterJustifyJustifyAlign LeftAlign LeftAlign RightAlign RightQWhatsThisActionWhat's This?What's This?QWidget**QWizardCancelCancelHelpHelp< &Back< &Back&Finish&Finish&Help&HelpGo BackGo BackContinueContinueCommitCommitDoneDone&Next&Next&Next >&Next >QWorkspace&Restore&Restore&Move&Move&Size&SizeMi&nimizeMi&nimizeMa&ximizeMa&ximize&Close&CloseStay on &TopStay on &TopMinimizeMinimizeRestore DownRestore DownCloseCloseSh&adeSh&ade%1 - [%2]%1 - [%2]&Unshade&UnshadeQXmlno error occurredno error occurrederror triggered by consumererror triggered by consumerunexpected end of fileunexpected end of filemore than one document type definitionmore than one document type definitionerror occurred while parsing elementerror occurred while parsing elementtag mismatchtag mismatcherror occurred while parsing contenterror occurred while parsing contentunexpected characterunexpected characterinvalid name for processing instructioninvalid name for processing instructionversion expected while reading the XML declarationversion expected while reading the XML declarationwrong value for standalone declarationwrong value for standalone declarationerror occurred while parsing document type definitionerror occurred while parsing document type definitionletter is expectedletter is expectederror occurred while parsing commenterror occurred while parsing commenterror occurred while parsing referenceerror occurred while parsing referenceinternal general entity reference not allowed in DTDinternal general entity reference not allowed in DTDexternal parsed general entity reference not allowed in attribute valueexternal parsed general entity reference not allowed in attribute valueexternal parsed general entity reference not allowed in DTDexternal parsed general entity reference not allowed in DTDunparsed entity reference in wrong contextunparsed entity reference in wrong contextrecursive entitiesrecursive entitieserror in the text declaration of an external entityerror in the text declaration of an external entityencoding declaration or standalone declaration expected while reading the XML declarationencoding declaration or standalone declaration expected while reading the XML declarationstandalone declaration expected while reading the XML declarationstandalone declaration expected while reading the XML declarationQXmlPatternistCLIWarning in %1, at line %2, column %3: %4Warning in %1, at line %2, column %3: %4Warning in %1: %2Warning in %1: %2Unknown locationUnknown locationError %1 in %2, at line %3, column %4: %5Error %1 in %2, at line %3, column %4: %5Error %1 in %2: %3Error %1 in %2: %3QXmlStreamExtra content at end of document.Extra content at end of document.Invalid entity value.Invalid entity value.Invalid XML character.Invalid XML character.Sequence ']]>' not allowed in content.Sequence ']]>' not allowed in content.Namespace prefix '%1' not declaredNamespace prefix '%1' not declaredAttribute redefined.Attribute redefined.Unexpected character '%1' in public id literal.Unexpected character '%1' in public id literal.Invalid XML version string.Invalid XML version string.Unsupported XML version.Unsupported XML version.%1 is an invalid encoding name.%1 is an invalid encoding name.Encoding %1 is unsupportedEncoding %1 is unsupportedStandalone accepts only yes or no.Standalone accepts only yes or no.Invalid attribute in XML declaration.Invalid attribute in XML declaration.Premature end of document.Premature end of document.Invalid document.Invalid document.Expected Expected , but got ', but got 'Unexpected 'Unexpected 'Expected character data.Expected character data.Recursive entity detected.Recursive entity detected.Start tag expected.Start tag expected.XML declaration not at start of document.XML declaration not at start of document.NDATA in parameter entity declaration.NDATA in parameter entity declaration.%1 is an invalid processing instruction name.%1 is an invalid processing instruction name.Invalid processing instruction name.Invalid processing instruction name.Illegal namespace declaration.Illegal namespace declaration.Invalid XML name.Invalid XML name.Opening and ending tag mismatch.Opening and ending tag mismatch.Reference to unparsed entity '%1'.Reference to unparsed entity '%1'.Entity '%1' not declared.Entity '%1' not declared.Reference to external entity '%1' in attribute value.Reference to external entity '%1' in attribute value.Invalid character reference.Invalid character reference.Encountered incorrectly encoded content.Encountered incorrectly encoded content.The standalone pseudo attribute must appear after the encoding.The standalone pseudo attribute must appear after the encoding.%1 is an invalid PUBLIC identifier.%1 is an invalid PUBLIC identifier.QtXmlPatternsAt least one component must be present.At least one component must be present.%1 is not a valid value of type %2.%1 is not a valid value of type %2.When casting to %1 from %2, the source value cannot be %3.When casting to %1 from %2, the source value cannot be %3.Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values.Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values.The data of a processing instruction cannot contain the string %1The data of a processing instruction cannot contain the string %1%1 is an invalid %2%1 is an invalid %2%1 is not a valid XML 1.0 character.%1 is not a valid XML 1.0 character.%1 was called.%1 was called.In the replacement string, %1 must be followed by at least one digit when not escaped.In the replacement string, %1 must be followed by at least one digit when not escaped.In the replacement string, %1 can only be used to escape itself or %2, not %3In the replacement string, %1 can only be used to escape itself or %2, not %3%1 matches newline characters%1 matches newline charactersMatches are case insensitiveMatches are case insensitive%1 is an invalid regular expression pattern: %2%1 is an invalid regular expression pattern: %2It will not be possible to retrieve %1.It will not be possible to retrieve %1.The default collection is undefinedThe default collection is undefined%1 cannot be retrieved%1 cannot be retrievedThe item %1 did not match the required type %2.The item %1 did not match the required type %2.%1 is an unknown schema type.%1 is an unknown schema type.A template with name %1 has already been declared.A template with name %1 has already been declared.Only one %1 declaration can occur in the query prolog.Only one %1 declaration can occur in the query prolog.The initialization of variable %1 depends on itselfThe initialization of variable %1 depends on itselfThe variable %1 is unusedThe variable %1 is unusedVersion %1 is not supported. The supported XQuery version is 1.0.Version %1 is not supported. The supported XQuery version is 1.0.No function with signature %1 is availableNo function with signature %1 is availableIt is not possible to redeclare prefix %1.It is not possible to redeclare prefix %1.Prefix %1 is already declared in the prolog.Prefix %1 is already declared in the prolog.The name of an option must have a prefix. There is no default namespace for options.The name of an option must have a prefix. There is no default namespace for options.The Schema Import feature is not supported, and therefore %1 declarations cannot occur.The Schema Import feature is not supported, and therefore %1 declarations cannot occur.The target namespace of a %1 cannot be empty.The target namespace of a %1 cannot be empty.The module import feature is not supportedThe module import feature is not supportedThe namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2A function already exists with the signature %1.A function already exists with the signature %1.No external functions are supported. All supported functions can be used directly, without first declaring them as externalNo external functions are supported. All supported functions can be used directly, without first declaring them as externalThe %1-axis is unsupported in XQueryThe %1-axis is unsupported in XQueryThe namespace URI cannot be the empty string when binding to a prefix, %1.The namespace URI cannot be the empty string when binding to a prefix, %1.%1 is an invalid namespace URI.%1 is an invalid namespace URI.It is not possible to bind to the prefix %1It is not possible to bind to the prefix %1Two namespace declaration attributes have the same name: %1.Two namespace declaration attributes have the same name: %1.The namespace URI must be a constant and cannot use enclosed expressions.The namespace URI must be a constant and cannot use enclosed expressions.%1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported.%1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported.emptyemptyzero or onezero or oneexactly oneexactly oneone or moreone or morezero or morezero or moreThe focus is undefined.The focus is undefined.An attribute by name %1 has already been created.An attribute by name %1 has already been created.Network timeout.Network timeout.Element %1 can't be serialized because it appears outside the document element.Element %1 can't be serialized because it appears outside the document element.Year %1 is invalid because it begins with %2.Year %1 is invalid because it begins with %2.Day %1 is outside the range %2..%3.Day %1 is outside the range %2..%3.Month %1 is outside the range %2..%3.Month %1 is outside the range %2..%3.Overflow: Can't represent date %1.Overflow: Can't represent date %1.Day %1 is invalid for month %2.Day %1 is invalid for month %2.Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; Time %1:%2:%3.%4 is invalid.Time %1:%2:%3.%4 is invalid.Overflow: Date can't be represented.Overflow: Date can't be represented.At least one time component must appear after the %1-delimiter.At least one time component must appear after the %1-delimiter.Dividing a value of type %1 by %2 (not-a-number) is not allowed.Dividing a value of type %1 by %2 (not-a-number) is not allowed.Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed.Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed.Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed.Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed.A value of type %1 cannot have an Effective Boolean Value.A value of type %1 cannot have an Effective Boolean Value.Value %1 of type %2 exceeds maximum (%3).Value %1 of type %2 exceeds maximum (%3).Value %1 of type %2 is below minimum (%3).Value %1 of type %2 is below minimum (%3).A value of type %1 must contain an even number of digits. The value %2 does not.A value of type %1 must contain an even number of digits. The value %2 does not.%1 is not valid as a value of type %2.%1 is not valid as a value of type %2.Operator %1 cannot be used on type %2.Operator %1 cannot be used on type %2.Operator %1 cannot be used on atomic values of type %2 and %3.Operator %1 cannot be used on atomic values of type %2 and %3.The namespace URI in the name for a computed attribute cannot be %1.The namespace URI in the name for a computed attribute cannot be %1.The name for a computed attribute cannot have the namespace URI %1 with the local name %2.The name for a computed attribute cannot have the namespace URI %1 with the local name %2.Type error in cast, expected %1, received %2.Type error in cast, expected %1, received %2.When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed.When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed.A comment cannot contain %1A comment cannot contain %1A comment cannot end with a %1.A comment cannot end with a %1.An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place.An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place.A library module cannot be evaluated directly. It must be imported from a main module.A library module cannot be evaluated directly. It must be imported from a main module.No template by name %1 exists.No template by name %1 exists.A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type.A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type.A positional predicate must evaluate to a single numeric value.A positional predicate must evaluate to a single numeric value.The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid.The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid.%1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3.%1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3.The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two.The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two.No namespace binding exists for the prefix %1No namespace binding exists for the prefix %1No namespace binding exists for the prefix %1 in %2No namespace binding exists for the prefix %1 in %2The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration.The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration.The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same.If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same.%1 must be followed by %2 or %3, not at the end of the replacement string.%1 must be followed by %2 or %3, not at the end of the replacement string.%1 and %2 match the start and end of a line.%1 and %2 match the start and end of a line.Whitespace characters are removed, except when they appear in character classesWhitespace characters are removed, except when they appear in character classes%1 is an invalid flag for regular expressions. Valid flags are:%1 is an invalid flag for regular expressions. Valid flags are:If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified.If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified.The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization).The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization).A zone offset must be in the range %1..%2 inclusive. %3 is out of range.A zone offset must be in the range %1..%2 inclusive. %3 is out of range.Required cardinality is %1; got cardinality %2.Required cardinality is %1; got cardinality %2.The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2.The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2.The keyword %1 cannot occur with any other mode name.The keyword %1 cannot occur with any other mode name.No variable with name %1 existsNo variable with name %1 existsThe value of attribute %1 must be of type %2, which %3 isn't.The value of attribute %1 must be of type %2, which %3 isn't.The prefix %1 cannot be bound. By default, it is already bound to the namespace %2.The prefix %1 cannot be bound. By default, it is already bound to the namespace %2.A variable with name %1 has already been declared.A variable with name %1 has already been declared.No value is available for the external variable with name %1.No value is available for the external variable with name %1.A stylesheet function must have a prefixed name.A stylesheet function must have a prefixed name.The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases.The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases.An argument with name %1 has already been declared. Every argument name must be unique.An argument with name %1 has already been declared. Every argument name must be unique.When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal.When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal.In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching.In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching.In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching.In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching.In an XSL-T pattern, function %1 cannot have a third argument.In an XSL-T pattern, function %1 cannot have a third argument.In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching.In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching.In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can.In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can.%1 is an invalid template mode name.%1 is an invalid template mode name.The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide.The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide.The Schema Validation Feature is not supported. Hence, %1-expressions may not be used.The Schema Validation Feature is not supported. Hence, %1-expressions may not be used.None of the pragma expressions are supported. Therefore, a fallback expression must be presentNone of the pragma expressions are supported. Therefore, a fallback expression must be presentEach name of a template parameter must be unique; %1 is duplicated.Each name of a template parameter must be unique; %1 is duplicated.No function with name %1 is available.No function with name %1 is available.%1 is not a valid numeric literal.%1 is not a valid numeric literal.W3C XML Schema identity constraint selectorW3C XML Schema identity constraint selectorW3C XML Schema identity constraint fieldW3C XML Schema identity constraint fieldA construct was encountered which is disallowed in the current language(%1).A construct was encountered which is disallowed in the current language(%1).Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared).Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared).Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared).Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared).An attribute with name %1 has already appeared on this element.An attribute with name %1 has already appeared on this element.A direct element constructor is not well-formed. %1 is ended with %2.A direct element constructor is not well-formed. %1 is ended with %2.The name %1 does not refer to any schema type.The name %1 does not refer to any schema type.%1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works.%1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works.%1 is not an atomic type. Casting is only possible to atomic types.%1 is not an atomic type. Casting is only possible to atomic types.%1 is not a valid name for a processing-instruction.%1 is not a valid name for a processing-instruction.The name of an extension expression must be in a namespace.The name of an extension expression must be in a namespace.Required type is %1, but %2 was found.Required type is %1, but %2 was found.Promoting %1 to %2 may cause loss of precision.Promoting %1 to %2 may cause loss of precision.It's not possible to add attributes after any other kind of node.It's not possible to add attributes after any other kind of node.Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.Integer division (%1) by zero (%2) is undefined.Integer division (%1) by zero (%2) is undefined.Division (%1) by zero (%2) is undefined.Division (%1) by zero (%2) is undefined.Modulus division (%1) by zero (%2) is undefined.Modulus division (%1) by zero (%2) is undefined.%1 takes at most %n argument(s). %2 is therefore invalid.%1 takes at most %n argument(s). %2 is therefore invalid.%1 takes at most %n argument(s). %2 is therefore invalid.%1 requires at least %n argument(s). %2 is therefore invalid.%1 requires at least %n argument(s). %2 is therefore invalid.%1 requires at least %n argument(s). %2 is therefore invalid.The root node of the second argument to function %1 must be a document node. %2 is not a document node.The root node of the second argument to function %1 must be a document node. %2 is not a document node.The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this)The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this)A default namespace declaration must occur before function, variable, and option declarations.A default namespace declaration must occur before function, variable, and option declarations.Namespace declarations must occur before function, variable, and option declarations.Namespace declarations must occur before function, variable, and option declarations.Module imports must occur before function, variable, and option declarations.Module imports must occur before function, variable, and option declarations.%1 is not a whole number of minutes.%1 is not a whole number of minutes.Attribute %1 can't be serialized because it appears at the top level.Attribute %1 can't be serialized because it appears at the top level.%1 is an unsupported encoding.%1 is an unsupported encoding.%1 contains octets which are disallowed in the requested encoding %2.%1 contains octets which are disallowed in the requested encoding %2.The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character.The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character.Ambiguous rule match.Ambiguous rule match.In a namespace constructor, the value for a namespace cannot be an empty string.In a namespace constructor, the value for a namespace cannot be an empty string.The prefix must be a valid %1, which %2 is not.The prefix must be a valid %1, which %2 is not.The prefix %1 cannot be bound.The prefix %1 cannot be bound.Only the prefix %1 can be bound to %2 and vice versa.Only the prefix %1 can be bound to %2 and vice versa.The parameter %1 is required, but no corresponding %2 is supplied.The parameter %1 is required, but no corresponding %2 is supplied.The parameter %1 is passed, but no corresponding %2 exists.The parameter %1 is passed, but no corresponding %2 exists.The URI cannot have a fragmentThe URI cannot have a fragmentElement %1 is not allowed at this location.Element %1 is not allowed at this location.Text nodes are not allowed at this location.Text nodes are not allowed at this location.Parse error: %1Parse error: %1The value of the XSL-T version attribute must be a value of type %1, which %2 isn't.The value of the XSL-T version attribute must be a value of type %1, which %2 isn't.Running an XSL-T 1.0 stylesheet with a 2.0 processor.Running an XSL-T 1.0 stylesheet with a 2.0 processor.Unknown XSL-T attribute %1.Unknown XSL-T attribute %1.Attribute %1 and %2 are mutually exclusive.Attribute %1 and %2 are mutually exclusive.In a simplified stylesheet module, attribute %1 must be present.In a simplified stylesheet module, attribute %1 must be present.If element %1 has no attribute %2, it cannot have attribute %3 or %4.If element %1 has no attribute %2, it cannot have attribute %3 or %4.Element %1 must have at least one of the attributes %2 or %3.Element %1 must have at least one of the attributes %2 or %3.At least one mode must be specified in the %1-attribute on element %2.At least one mode must be specified in the %1-attribute on element %2.Element %1 must come last.Element %1 must come last.At least one %1-element must occur before %2.At least one %1-element must occur before %2.Only one %1-element can appear.Only one %1-element can appear.At least one %1-element must occur inside %2.At least one %1-element must occur inside %2.When attribute %1 is present on %2, a sequence constructor cannot be used.When attribute %1 is present on %2, a sequence constructor cannot be used.Element %1 must have either a %2-attribute or a sequence constructor.Element %1 must have either a %2-attribute or a sequence constructor.When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor.When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor.Element %1 cannot have children.Element %1 cannot have children.Element %1 cannot have a sequence constructor.Element %1 cannot have a sequence constructor.The attribute %1 cannot appear on %2, when it is a child of %3.The attribute %1 cannot appear on %2, when it is a child of %3.A parameter in a function cannot be declared to be a tunnel.A parameter in a function cannot be declared to be a tunnel.This processor is not Schema-aware and therefore %1 cannot be used.This processor is not Schema-aware and therefore %1 cannot be used.Top level stylesheet elements must be in a non-null namespace, which %1 isn't.Top level stylesheet elements must be in a non-null namespace, which %1 isn't.The value for attribute %1 on element %2 must either be %3 or %4, not %5.The value for attribute %1 on element %2 must either be %3 or %4, not %5.Attribute %1 cannot have the value %2.Attribute %1 cannot have the value %2.The attribute %1 can only appear on the first %2 element.The attribute %1 can only appear on the first %2 element.At least one %1 element must appear as child of %2.At least one %1 element must appear as child of %2.%1 has inheritance loop in its base type %2.%1 has inheritance loop in its base type %2.Circular inheritance of base type %1.Circular inheritance of base type %1.Circular inheritance of union %1.Circular inheritance of union %1.%1 is not allowed to derive from %2 by restriction as the latter defines it as final.%1 is not allowed to derive from %2 by restriction as the latter defines it as final.%1 is not allowed to derive from %2 by extension as the latter defines it as final.%1 is not allowed to derive from %2 by extension as the latter defines it as final.Base type of simple type %1 cannot be complex type %2.Base type of simple type %1 cannot be complex type %2.Simple type %1 cannot have direct base type %2.Simple type %1 cannot have direct base type %2.Simple type %1 is not allowed to have base type %2.Simple type %1 is not allowed to have base type %2.Simple type %1 can only have simple atomic type as base type.Simple type %1 can only have simple atomic type as base type.Simple type %1 cannot derive from %2 as the latter defines restriction as final.Simple type %1 cannot derive from %2 as the latter defines restriction as final.Variety of item type of %1 must be either atomic or union.Variety of item type of %1 must be either atomic or union.Variety of member types of %1 must be atomic.Variety of member types of %1 must be atomic.%1 is not allowed to derive from %2 by list as the latter defines it as final.%1 is not allowed to derive from %2 by list as the latter defines it as final.Simple type %1 is only allowed to have %2 facet.Simple type %1 is only allowed to have %2 facet.Base type of simple type %1 must have variety of type list.Base type of simple type %1 must have variety of type list.Base type of simple type %1 has defined derivation by restriction as final.Base type of simple type %1 has defined derivation by restriction as final.Item type of base type does not match item type of %1.Item type of base type does not match item type of %1.Simple type %1 contains not allowed facet type %2.Simple type %1 contains not allowed facet type %2.%1 is not allowed to derive from %2 by union as the latter defines it as final.%1 is not allowed to derive from %2 by union as the latter defines it as final.%1 is not allowed to have any facets.%1 is not allowed to have any facets.Base type %1 of simple type %2 must have variety of union.Base type %1 of simple type %2 must have variety of union.Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute.Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute.Member type %1 cannot be derived from member type %2 of %3's base type %4.Member type %1 cannot be derived from member type %2 of %3's base type %4.Derivation method of %1 must be extension because the base type %2 is a simple type.Derivation method of %1 must be extension because the base type %2 is a simple type.Complex type %1 has duplicated element %2 in its content model.Complex type %1 has duplicated element %2 in its content model.Complex type %1 has non-deterministic content.Complex type %1 has non-deterministic content.Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3.Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3.Content model of complex type %1 is not a valid extension of content model of %2.Content model of complex type %1 is not a valid extension of content model of %2.Complex type %1 must have simple content.Complex type %1 must have simple content.Complex type %1 must have the same simple type as its base class %2.Complex type %1 must have the same simple type as its base class %2.Complex type %1 cannot be derived from base type %2%3.Complex type %1 cannot be derived from base type %2%3.Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3.Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3.Complex type %1 with simple content cannot be derived from complex base type %2.Complex type %1 with simple content cannot be derived from complex base type %2.Item type of simple type %1 cannot be a complex type.Item type of simple type %1 cannot be a complex type.Member type of simple type %1 cannot be a complex type.Member type of simple type %1 cannot be a complex type.%1 is not allowed to have a member type with the same name as itself.%1 is not allowed to have a member type with the same name as itself.%1 facet collides with %2 facet.%1 facet collides with %2 facet.%1 facet must have the same value as %2 facet of base type.%1 facet must have the same value as %2 facet of base type.%1 facet must be equal or greater than %2 facet of base type.%1 facet must be equal or greater than %2 facet of base type.%1 facet must be less than or equal to %2 facet of base type.%1 facet must be less than or equal to %2 facet of base type.%1 facet contains invalid regular expression%1 facet contains invalid regular expressionUnknown notation %1 used in %2 facet.Unknown notation %1 used in %2 facet.%1 facet contains invalid value %2: %3.%1 facet contains invalid value %2: %3.%1 facet cannot be %2 or %3 if %4 facet of base type is %5.%1 facet cannot be %2 or %3 if %4 facet of base type is %5.%1 facet cannot be %2 if %3 facet of base type is %4.%1 facet cannot be %2 if %3 facet of base type is %4.%1 facet must be less than or equal to %2 facet.%1 facet must be less than or equal to %2 facet.%1 facet must be less than %2 facet of base type.%1 facet must be less than %2 facet of base type.%1 facet and %2 facet cannot appear together.%1 facet and %2 facet cannot appear together.%1 facet must be greater than %2 facet of base type.%1 facet must be greater than %2 facet of base type.%1 facet must be less than %2 facet.%1 facet must be less than %2 facet.%1 facet must be greater than or equal to %2 facet of base type.%1 facet must be greater than or equal to %2 facet of base type.Simple type contains not allowed facet %1.Simple type contains not allowed facet %1.%1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list.%1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list.Only %1 and %2 facets are allowed when derived by union.Only %1 and %2 facets are allowed when derived by union.%1 contains %2 facet with invalid data: %3.%1 contains %2 facet with invalid data: %3.Attribute group %1 contains attribute %2 twice.Attribute group %1 contains attribute %2 twice.Attribute group %1 contains two different attributes that both have types derived from %2.Attribute group %1 contains two different attributes that both have types derived from %2.Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3.Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3.Complex type %1 contains attribute %2 twice.Complex type %1 contains attribute %2 twice.Complex type %1 contains two different attributes that both have types derived from %2.Complex type %1 contains two different attributes that both have types derived from %2.Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3.Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3.Element %1 is not allowed to have a value constraint if its base type is complex.Element %1 is not allowed to have a value constraint if its base type is complex.Element %1 is not allowed to have a value constraint if its type is derived from %2.Element %1 is not allowed to have a value constraint if its type is derived from %2.Value constraint of element %1 is not of elements type: %2.Value constraint of element %1 is not of elements type: %2.Element %1 is not allowed to have substitution group affiliation as it is no global element.Element %1 is not allowed to have substitution group affiliation as it is no global element.Type of element %1 cannot be derived from type of substitution group affiliation.Type of element %1 cannot be derived from type of substitution group affiliation.Value constraint of attribute %1 is not of attributes type: %2.Value constraint of attribute %1 is not of attributes type: %2.Attribute %1 has value constraint but has type derived from %2.Attribute %1 has value constraint but has type derived from %2.%1 attribute in derived complex type must be %2 like in base type.%1 attribute in derived complex type must be %2 like in base type.Attribute %1 in derived complex type must have %2 value constraint like in base type.Attribute %1 in derived complex type must have %2 value constraint like in base type.Attribute %1 in derived complex type must have the same %2 value constraint like in base type.Attribute %1 in derived complex type must have the same %2 value constraint like in base type.Attribute %1 in derived complex type must have %2 value constraint.Attribute %1 in derived complex type must have %2 value constraint.processContent of base wildcard must be weaker than derived wildcard.processContent of base wildcard must be weaker than derived wildcard.Element %1 exists twice with different types.Element %1 exists twice with different types.Particle contains non-deterministic wildcards.Particle contains non-deterministic wildcards.Base attribute %1 is required but derived attribute is not.Base attribute %1 is required but derived attribute is not.Type of derived attribute %1 cannot be validly derived from type of base attribute.Type of derived attribute %1 cannot be validly derived from type of base attribute.Value constraint of derived attribute %1 does not match value constraint of base attribute.Value constraint of derived attribute %1 does not match value constraint of base attribute.Derived attribute %1 does not exist in the base definition.Derived attribute %1 does not exist in the base definition.Derived attribute %1 does not match the wildcard in the base definition.Derived attribute %1 does not match the wildcard in the base definition.Base attribute %1 is required but missing in derived definition.Base attribute %1 is required but missing in derived definition.Derived definition contains an %1 element that does not exists in the base definitionDerived definition contains an %1 element that does not exists in the base definitionDerived wildcard is not a subset of the base wildcard.Derived wildcard is not a subset of the base wildcard.%1 of derived wildcard is not a valid restriction of %2 of base wildcard%1 of derived wildcard is not a valid restriction of %2 of base wildcardAttribute %1 from base type is missing in derived type.Attribute %1 from base type is missing in derived type.Type of derived attribute %1 differs from type of base attribute.Type of derived attribute %1 differs from type of base attribute.Base definition contains an %1 element that is missing in the derived definitionBase definition contains an %1 element that is missing in the derived definition%1 references unknown %2 or %3 element %4.%1 references unknown %2 or %3 element %4.%1 references identity constraint %2 that is no %3 or %4 element.%1 references identity constraint %2 that is no %3 or %4 element.%1 has a different number of fields from the identity constraint %2 that it references.%1 has a different number of fields from the identity constraint %2 that it references.Base type %1 of %2 element cannot be resolved.Base type %1 of %2 element cannot be resolved.Item type %1 of %2 element cannot be resolved.Item type %1 of %2 element cannot be resolved.Member type %1 of %2 element cannot be resolved.Member type %1 of %2 element cannot be resolved.Type %1 of %2 element cannot be resolved.Type %1 of %2 element cannot be resolved.Base type %1 of complex type cannot be resolved.Base type %1 of complex type cannot be resolved.%1 cannot have complex base type that has a %2.%1 cannot have complex base type that has a %2.Content model of complex type %1 contains %2 element so it cannot be derived by extension from a non-empty type.Content model of complex type %1 contains %2 element so it cannot be derived by extension from a non-empty type.Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model.Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model.Type of %1 element must be a simple type, %2 is not.Type of %1 element must be a simple type, %2 is not.Substitution group %1 of %2 element cannot be resolved.Substitution group %1 of %2 element cannot be resolved.Substitution group %1 has circular definition.Substitution group %1 has circular definition.Duplicated element names %1 in %2 element.Duplicated element names %1 in %2 element.Reference %1 of %2 element cannot be resolved.Reference %1 of %2 element cannot be resolved.Circular group reference for %1.Circular group reference for %1.%1 element is not allowed in this scope%1 element is not allowed in this scope%1 element cannot have %2 attribute with value other than %3.%1 element cannot have %2 attribute with value other than %3.%1 element cannot have %2 attribute with value other than %3 or %4.%1 element cannot have %2 attribute with value other than %3 or %4.%1 or %2 attribute of reference %3 does not match with the attribute declaration %4.%1 or %2 attribute of reference %3 does not match with the attribute declaration %4.Attribute group %1 has circular reference.Attribute group %1 has circular reference.%1 attribute in %2 must have %3 use like in base type %4.%1 attribute in %2 must have %3 use like in base type %4.Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2.Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2.%1 has attribute wildcard but its base type %2 has not.%1 has attribute wildcard but its base type %2 has not.Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible.Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible.Enumeration facet contains invalid content: {%1} is not a value of type %2.Enumeration facet contains invalid content: {%1} is not a value of type %2.Namespace prefix of qualified name %1 is not defined.Namespace prefix of qualified name %1 is not defined.%1 element %2 is not a valid restriction of the %3 element it redefines: %4.%1 element %2 is not a valid restriction of the %3 element it redefines: %4.Empty particle cannot be derived from non-empty particle.Empty particle cannot be derived from non-empty particle.Derived particle is missing element %1.Derived particle is missing element %1.Derived element %1 is missing value constraint as defined in base particle.Derived element %1 is missing value constraint as defined in base particle.Derived element %1 has weaker value constraint than base particle.Derived element %1 has weaker value constraint than base particle.Fixed value constraint of element %1 differs from value constraint in base particle.Fixed value constraint of element %1 differs from value constraint in base particle.Derived element %1 cannot be nillable as base element is not nillable.Derived element %1 cannot be nillable as base element is not nillable.Block constraints of derived element %1 must not be more weaker than in the base element.Block constraints of derived element %1 must not be more weaker than in the base element.Simple type of derived element %1 cannot be validly derived from base element.Simple type of derived element %1 cannot be validly derived from base element.Complex type of derived element %1 cannot be validly derived from base element.Complex type of derived element %1 cannot be validly derived from base element.Element %1 is missing in derived particle.Element %1 is missing in derived particle.Element %1 does not match namespace constraint of wildcard in base particle.Element %1 does not match namespace constraint of wildcard in base particle.Wildcard in derived particle is not a valid subset of wildcard in base particle.Wildcard in derived particle is not a valid subset of wildcard in base particle.processContent of wildcard in derived particle is weaker than wildcard in base particle.processContent of wildcard in derived particle is weaker than wildcard in base particle.Derived particle allows content that is not allowed in the base particle.Derived particle allows content that is not allowed in the base particle.Can not process unknown element %1, expected elements are: %2.Can not process unknown element %1, expected elements are: %2.Element %1 is not allowed in this scope, possible elements are: %2.Element %1 is not allowed in this scope, possible elements are: %2.Child element is missing in that scope, possible child elements are: %1.Child element is missing in that scope, possible child elements are: %1.Document is not a XML schema.Document is not a XML schema.%1 attribute of %2 element contains invalid content: {%3} is not a value of type %4.%1 attribute of %2 element contains invalid content: {%3} is not a value of type %4.%1 attribute of %2 element contains invalid content: {%3}.%1 attribute of %2 element contains invalid content: {%3}.Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema.Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema.Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema.Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema.%1 element is not allowed to have the same %2 attribute value as the target namespace %3.%1 element is not allowed to have the same %2 attribute value as the target namespace %3.%1 element without %2 attribute is not allowed inside schema without target namespace.%1 element without %2 attribute is not allowed inside schema without target namespace.%1 element is not allowed inside %2 element if %3 attribute is present.%1 element is not allowed inside %2 element if %3 attribute is present.%1 element has neither %2 attribute nor %3 child element.%1 element has neither %2 attribute nor %3 child element.%1 element with %2 child element must not have a %3 attribute.%1 element with %2 child element must not have a %3 attribute.%1 attribute of %2 element must be %3 or %4.%1 attribute of %2 element must be %3 or %4.%1 attribute of %2 element must have a value of %3.%1 attribute of %2 element must have a value of %3.%1 attribute of %2 element must have a value of %3 or %4.%1 attribute of %2 element must have a value of %3 or %4.%1 element must not have %2 and %3 attribute together.%1 element must not have %2 and %3 attribute together.Content of %1 attribute of %2 element must not be from namespace %3.Content of %1 attribute of %2 element must not be from namespace %3.%1 attribute of %2 element must not be %3.%1 attribute of %2 element must not be %3.%1 attribute of %2 element must have the value %3 because the %4 attribute is set.%1 attribute of %2 element must have the value %3 because the %4 attribute is set.Specifying use='prohibited' inside an attribute group has no effect.Specifying use='prohibited' inside an attribute group has no effect.%1 element must have either %2 or %3 attribute.%1 element must have either %2 or %3 attribute.%1 element must have either %2 attribute or %3 or %4 as child element.%1 element must have either %2 attribute or %3 or %4 as child element.%1 element requires either %2 or %3 attribute.%1 element requires either %2 or %3 attribute.Text or entity references not allowed inside %1 elementText or entity references not allowed inside %1 element%1 attribute of %2 element must contain %3, %4 or a list of URIs.%1 attribute of %2 element must contain %3, %4 or a list of URIs.%1 element is not allowed in this context.%1 element is not allowed in this context.%1 attribute of %2 element has larger value than %3 attribute.%1 attribute of %2 element has larger value than %3 attribute.Prefix of qualified name %1 is not defined.Prefix of qualified name %1 is not defined.%1 attribute of %2 element must either contain %3 or the other values.%1 attribute of %2 element must either contain %3 or the other values.Component with ID %1 has been defined previously.Component with ID %1 has been defined previously.Element %1 already defined.Element %1 already defined.Attribute %1 already defined.Attribute %1 already defined.Type %1 already defined.Type %1 already defined.Attribute group %1 already defined.Attribute group %1 already defined.Element group %1 already defined.Element group %1 already defined.Notation %1 already defined.Notation %1 already defined.Identity constraint %1 already defined.Identity constraint %1 already defined.Duplicated facets in simple type %1.Duplicated facets in simple type %1.%1 is not valid according to %2.%1 is not valid according to %2.String content does not match the length facet.String content does not match the length facet.String content does not match the minLength facet.String content does not match the minLength facet.String content does not match the maxLength facet.String content does not match the maxLength facet.String content does not match pattern facet.String content does not match pattern facet.String content is not listed in the enumeration facet.String content is not listed in the enumeration facet.Signed integer content does not match the maxInclusive facet.Signed integer content does not match the maxInclusive facet.Signed integer content does not match the maxExclusive facet.Signed integer content does not match the maxExclusive facet.Signed integer content does not match the minInclusive facet.Signed integer content does not match the minInclusive facet.Signed integer content does not match the minExclusive facet.Signed integer content does not match the minExclusive facet.Signed integer content is not listed in the enumeration facet.Signed integer content is not listed in the enumeration facet.Signed integer content does not match pattern facet.Signed integer content does not match pattern facet.Signed integer content does not match in the totalDigits facet.Signed integer content does not match in the totalDigits facet.Unsigned integer content does not match the maxInclusive facet.Unsigned integer content does not match the maxInclusive facet.Unsigned integer content does not match the maxExclusive facet.Unsigned integer content does not match the maxExclusive facet.Unsigned integer content does not match the minInclusive facet.Unsigned integer content does not match the minInclusive facet.Unsigned integer content does not match the minExclusive facet.Unsigned integer content does not match the minExclusive facet.Unsigned integer content is not listed in the enumeration facet.Unsigned integer content is not listed in the enumeration facet.Unsigned integer content does not match pattern facet.Unsigned integer content does not match pattern facet.Unsigned integer content does not match in the totalDigits facet.Unsigned integer content does not match in the totalDigits facet.Double content does not match the maxInclusive facet.Double content does not match the maxInclusive facet.Double content does not match the maxExclusive facet.Double content does not match the maxExclusive facet.Double content does not match the minInclusive facet.Double content does not match the minInclusive facet.Double content does not match the minExclusive facet.Double content does not match the minExclusive facet.Double content is not listed in the enumeration facet.Double content is not listed in the enumeration facet.Double content does not match pattern facet.Double content does not match pattern facet.Decimal content does not match in the fractionDigits facet.Decimal content does not match in the fractionDigits facet.Decimal content does not match in the totalDigits facet.Decimal content does not match in the totalDigits facet.Date time content does not match the maxInclusive facet.Date time content does not match the maxInclusive facet.Date time content does not match the maxExclusive facet.Date time content does not match the maxExclusive facet.Date time content does not match the minInclusive facet.Date time content does not match the minInclusive facet.Date time content does not match the minExclusive facet.Date time content does not match the minExclusive facet.Date time content is not listed in the enumeration facet.Date time content is not listed in the enumeration facet.Date time content does not match pattern facet.Date time content does not match pattern facet.Duration content does not match the maxInclusive facet.Duration content does not match the maxInclusive facet.Duration content does not match the maxExclusive facet.Duration content does not match the maxExclusive facet.Duration content does not match the minInclusive facet.Duration content does not match the minInclusive facet.Duration content does not match the minExclusive facet.Duration content does not match the minExclusive facet.Duration content is not listed in the enumeration facet.Duration content is not listed in the enumeration facet.Duration content does not match pattern facet.Duration content does not match pattern facet.Boolean content does not match pattern facet.Boolean content does not match pattern facet.Binary content does not match the length facet.Binary content does not match the length facet.Binary content does not match the minLength facet.Binary content does not match the minLength facet.Binary content does not match the maxLength facet.Binary content does not match the maxLength facet.Binary content is not listed in the enumeration facet.Binary content is not listed in the enumeration facet.Invalid QName content: %1.Invalid QName content: %1.QName content is not listed in the enumeration facet.QName content is not listed in the enumeration facet.QName content does not match pattern facet.QName content does not match pattern facet.Notation content is not listed in the enumeration facet.Notation content is not listed in the enumeration facet.List content does not match length facet.List content does not match length facet.List content does not match minLength facet.List content does not match minLength facet.List content does not match maxLength facet.List content does not match maxLength facet.List content is not listed in the enumeration facet.List content is not listed in the enumeration facet.List content does not match pattern facet.List content does not match pattern facet.Union content is not listed in the enumeration facet.Union content is not listed in the enumeration facet.Union content does not match pattern facet.Union content does not match pattern facet.Data of type %1 are not allowed to be empty.Data of type %1 are not allowed to be empty.Element %1 is missing child element.Element %1 is missing child element.There is one IDREF value with no corresponding ID: %1.There is one IDREF value with no corresponding ID: %1.Loaded schema file is invalid.Loaded schema file is invalid.%1 contains invalid data.%1 contains invalid data.xsi:schemaLocation namespace %1 has already appeared earlier in the instance document.xsi:schemaLocation namespace %1 has already appeared earlier in the instance document.xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute.xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute.No schema defined for validation.No schema defined for validation.No definition for element %1 available.No definition for element %1 available.Specified type %1 is not known to the schema.Specified type %1 is not known to the schema.Element %1 is not defined in this scope.Element %1 is not defined in this scope.Declaration for element %1 does not exist.Declaration for element %1 does not exist.Element %1 contains invalid content.Element %1 contains invalid content.Element %1 is declared as abstract.Element %1 is declared as abstract.Element %1 is not nillable.Element %1 is not nillable.Attribute %1 contains invalid data: %2Attribute %1 contains invalid data: %2Element contains content although it is nillable.Element contains content although it is nillable.Fixed value constraint not allowed if element is nillable.Fixed value constraint not allowed if element is nillable.Element %1 cannot contain other elements, as it has a fixed content.Element %1 cannot contain other elements, as it has a fixed content.Specified type %1 is not validly substitutable with element type %2.Specified type %1 is not validly substitutable with element type %2.Complex type %1 is not allowed to be abstract.Complex type %1 is not allowed to be abstract.Element %1 contains not allowed attributes.Element %1 contains not allowed attributes.Element %1 contains not allowed child element.Element %1 contains not allowed child element.Content of element %1 does not match its type definition: %2.Content of element %1 does not match its type definition: %2.Content of element %1 does not match defined value constraint.Content of element %1 does not match defined value constraint.Element %1 contains not allowed child content.Element %1 contains not allowed child content.Element %1 contains not allowed text content.Element %1 contains not allowed text content.Element %1 is missing required attribute %2.Element %1 is missing required attribute %2.Attribute %1 does not match the attribute wildcard.Attribute %1 does not match the attribute wildcard.Declaration for attribute %1 does not exist.Declaration for attribute %1 does not exist.Element %1 contains two attributes of type %2.Element %1 contains two attributes of type %2.Attribute %1 contains invalid content.Attribute %1 contains invalid content.Element %1 contains unknown attribute %2.Element %1 contains unknown attribute %2.Content of attribute %1 does not match its type definition: %2.Content of attribute %1 does not match its type definition: %2.Content of attribute %1 does not match defined value constraint.Content of attribute %1 does not match defined value constraint.Non-unique value found for constraint %1.Non-unique value found for constraint %1.Key constraint %1 contains absent fields.Key constraint %1 contains absent fields.Key constraint %1 contains references nillable element %2.Key constraint %1 contains references nillable element %2.No referenced value found for key reference %1.No referenced value found for key reference %1.More than one value found for field %1.More than one value found for field %1.Field %1 has no simple type.Field %1 has no simple type.ID value '%1' is not unique.ID value '%1' is not unique.'%1' attribute contains invalid QName content: %2.'%1' attribute contains invalid QName content: %2.