/**************************************************************************** ** ** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies). ** Contact: http://www.qt-project.org/legal ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and Digia. For licensing terms and ** conditions see http://qt.digia.com/licensing. For further information ** use the contact form at http://qt.digia.com/contact-us. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Digia gives you certain additional ** rights. These rights are described in the Digia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ //! [0] make all //! [0] //! [1] CONFIG += qt thread debug //! [1] //! [2] CONFIG += qt QT += network xml //! [2] //! [3] QT = network xml # This will omit the core and gui modules. //! [3] //! [4] QT -= gui # Only the core module is used. //! [4] //! [5] CONFIG += link_pkgconfig PKGCONFIG += ogg dbus-1 //! [5] //! [6] LIBS += -L/usr/local/lib -lmath //! [6] //! [7] INCLUDEPATH = c:/msdev/include d:/stl/include //! [7] //! [8] qmake [mode] [options] files //! [8] //! [9] qmake -makefile [options] files //! [9] //! [10] qmake -makefile -unix -o Makefile "CONFIG+=test" test.pro //! [10] //! [11] qmake "CONFIG+=test" test.pro //! [11] //! [12] qmake -project [options] files //! [12] //! [13] qmake -spec macx-g++ //! [13] //! [14] QMAKE_LFLAGS += -F/path/to/framework/directory/ //! [14] //! [15] LIBS += -framework TheFramework //! [15] //! [16] TEMPLATE = lib CONFIG += lib_bundle //! [16] //! [17] FRAMEWORK_HEADERS.version = Versions FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h FRAMEWORK_HEADERS.path = Headers QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS //! [17] //! [18] CONFIG += x86 ppc //! [18] //! [19] qmake -spec macx-xcode project.pro //! [19] //! [20] qmake -tp vc //! [20] //! [21] qmake -tp vc -r //! [21] //! [22] CONFIG -= embed_manifest_exe //! [22] //! [23] CONFIG -= embed_manifest_dll //! [23] //! [24] make all //! [24] //! [25] build_pass:CONFIG(debug, debug|release) { unix: TARGET = $$join(TARGET,,,_debug) else: TARGET = $$join(TARGET,,,d) } //! [25] //! [26] CONFIG += qt console newstuff ... newstuff { SOURCES += new.cpp HEADERS += new.h } //! [26] //! [27] DEFINES += USE_MY_STUFF QT_DLL //! [27] //! [28] myFiles.sources = path\*.png DEPLOYMENT += myFiles //! [28] //! [29] myFiles.sources = path\file1.ext1 path2\file2.ext1 path3\* myFiles.path = \some\path\on\device someother.sources = C:\additional\files\* someother.path = \myFiles\path2 DEPLOYMENT += myFiles someother //! [29] //! [30] DESTDIR = ../../lib //! [30] //! [31] DISTFILES += ../program.txt //! [31] //! [32] FORMS = mydialog.ui \ mywidget.ui \ myconfig.ui //! [32] //! [33] FORMS3 = my_uic3_dialog.ui \ my_uic3_widget.ui \ my_uic3_config.ui //! [33] //! [34] HEADERS = myclass.h \ login.h \ mainwindow.h //! [34] //! [35] INCLUDEPATH = c:/msdev/include d:/stl/include //! [35] //! [36] target.path += $$[QT_INSTALL_PLUGINS]/imageformats INSTALLS += target //! [36] //! [37] LEXSOURCES = lexer.l //! [37] //! [38] unix:LIBS += -L/usr/local/lib -lmath win32:LIBS += c:/mylibs/math.lib //! [38] //! [39] CONFIG += no_lflags_merge //! [39] //! [40] unix:MOC_DIR = ../myproject/tmp win32:MOC_DIR = c:/myproject/tmp //! [40] //! [41] unix:OBJECTS_DIR = ../myproject/tmp win32:OBJECTS_DIR = c:/myproject/tmp //! [41] //! [42] app { # Conditional code for 'app' template here } //! [42] //! [43] FRAMEWORK_HEADERS.version = Versions FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h FRAMEWORK_HEADERS.path = Headers QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS //! [43] //! [44] QMAKE_BUNDLE_EXTENSION = .myframework //! [44] //! [45] QMAKE_RESOURCE_FLAGS += -threshold 0 -compress 9 //! [45] //! [46] QMAKE_UIC = uic -L /path/to/plugin //! [46] //! [47] QT -= gui # Only the core module is used. //! [47] //! [48] unix:RCC_DIR = ../myproject/resources win32:RCC_DIR = c:/myproject/resources //! [48] //! [49] SOURCES = myclass.cpp \ login.cpp \ mainwindow.cpp //! [49] //! [50] SUBDIRS = kernel \ tools //! [50] //! [51] CONFIG += ordered //! [51] //! [52] TEMPLATE = app TARGET = myapp SOURCES = main.cpp //! [52] //! [53] TEMPLATE = lib SOURCES = main.cpp TARGET = mylib //! [53] //! [54] unix:UI_DIR = ../myproject/ui win32:UI_DIR = c:/myproject/ui //! [54] //! [55] unix:UI_HEADERS_DIR = ../myproject/ui/include win32:UI_HEADERS_DIR = c:/myproject/ui/include //! [55] //! [56] unix:UI_SOURCES_DIR = ../myproject/ui/src win32:UI_SOURCES_DIR = c:/myproject/ui/src //! [56] //! [57] VERSION = 1.2.3 //! [57] //! [58] YACCSOURCES = moc.y //! [58] //! [59] FILE = /etc/passwd FILENAME = $$basename(FILE) #passwd //! [59] //! [60] CONFIG = debug CONFIG += release CONFIG(release, debug|release):message(Release build!) #will print CONFIG(debug, debug|release):message(Debug build!) #no print //! [60] //! [61] contains( drivers, network ) { # drivers contains 'network' message( "Configuring for network build..." ) HEADERS += network.h SOURCES += network.cpp } //! [61] //! [62] error(An error has occurred in the configuration process.) //! [62] //! [63] exists( $(QTDIR)/lib/libqt-mt* ) { message( "Configuring for multi-threaded Qt..." ) CONFIG += thread } //! [63] //! [64] MY_VAR = one two three four MY_VAR2 = $$join(MY_VAR, " -L", -L) -Lfive MY_VAR3 = $$member(MY_VAR, 2) $$find(MY_VAR, t.*) //! [64] //! [65] LIST = 1 2 3 for(a, LIST):exists(file.$${a}):message(I see a file.$${a}!) //! [65] //! [66] include( shared.pri ) OPTIONS = standard custom !include( options.pri ) { message( "No custom build options specified" ) OPTIONS -= custom } //! [66] //! [67] isEmpty( CONFIG ) { CONFIG += qt warn_on debug } //! [67] //! [68] message( "This is a message" ) //! [68] //! [69] !build_pass:message( "This is a message" ) //! [69] //! [70] This is a test. //! [70] //! [71] system(ls /bin):HAS_BIN=FALSE //! [71] //! [72] UNAME = $$system(uname -s) contains( UNAME, [lL]inux ):message( This looks like Linux ($$UNAME) to me ) //! [72] //! [73] ARGS = 1 2 3 2 5 1 ARGS = $$unique(ARGS) #1 2 3 5 //! [73] //! [74] qmake -set VARIABLE VALUE //! [74] //! [75] qmake -query VARIABLE qmake -query #queries all current VARIABLE/VALUE pairs.. //! [75] //! [76] qmake -query "1.06a/VARIABLE" //! [76] //! [77] qmake -query "QT_INSTALL_PREFIX" //! [77] //! [78] QMAKE_VERS = $$[QMAKE_VERSION] //! [78] //! [79] documentation.path = /usr/local/program/doc documentation.files = docs/* //! [79] //! [80] INSTALLS += documentation //! [80] //! [81] unix:documentation.extra = create_docs; mv master.doc toc.doc //! [81] //! [82] target.path = /usr/local/myprogram INSTALLS += target //! [82] //! [83] CONFIG += create_prl //! [83] //! [84] CONFIG += link_prl //! [84] //! [85] QMAKE_EXT_MOC = .mymoc //! [85] //! [86] mytarget.target = .buildfile mytarget.commands = touch $$mytarget.target mytarget.depends = mytarget2 mytarget2.commands = @echo Building $$mytarget.target //! [86] //! [87] QMAKE_EXTRA_TARGETS += mytarget mytarget2 //! [87] //! [88] new_moc.output = moc_${QMAKE_FILE_BASE}.cpp new_moc.commands = moc ${QMAKE_FILE_NAME} -o ${QMAKE_FILE_OUT} new_moc.depend_command = g++ -E -M ${QMAKE_FILE_NAME} | sed "s,^.*: ,," new_moc.input = NEW_HEADERS QMAKE_EXTRA_COMPILERS += new_moc //! [88] //! [89] TARGET = myapp //! [89] //! [90] DEFINES += QT_DLL //! [90] //! [91] DEFINES -= QT_DLL //! [91] //! [92] DEFINES *= QT_DLL //! [92] //! [93] DEFINES ~= s/QT_[DT].+/QT //! [93] //! [94] EVERYTHING = $$SOURCES $$HEADERS message("The project contains the following files:") message($$EVERYTHING) //! [94] //! [95] win32:DEFINES += QT_DLL //! [95] //! [96] win32:xml { message(Building for Windows) SOURCES += xmlhandler_win.cpp } else:xml { SOURCES += xmlhandler.cpp } else { message("Unknown configuration") } //! [96] //! [97] MY_VARIABLE = value //! [97] //! [98] MY_DEFINES = $$DEFINES //! [98] //! [99] MY_DEFINES = $${DEFINES} //! [99] //! [100] TARGET = myproject_$${TEMPLATE} //! [100] //! [101] target.path = $$[QT_INSTALL_PLUGINS]/designer INSTALLS += target //! [101] //! [102] defineReplace(functionName){ #function code } //! [102] //! [103] CONFIG += myfeatures //! [103] //! [104] // Add C includes here #if defined __cplusplus // Add C++ includes here #include #include #include #include // Qt includes #include #include #include "thirdparty/include/libmain.h" #include "my_stable_class.h" ... #endif //! [104] //! [105] PRECOMPILED_HEADER = stable.h //! [105] //! [106] precompile_header:!isEmpty(PRECOMPILED_HEADER) { DEFINES += USING_PCH } //! [106] //! [107] PRECOMPILED_HEADER = window.h SOURCES = window.cpp //! [107] //! [108] SOURCES += hello.cpp //! [108] //! [109] SOURCES += hello.cpp SOURCES += main.cpp //! [109] //! [110] SOURCES = hello.cpp \ main.cpp //! [110] //! [111] HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp //! [111] //! [112] TARGET = helloworld //! [112] //! [113] CONFIG += qt HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp //! [113] //! [114] qmake -o Makefile hello.pro //! [114] //! [115] qmake -tp vc -o hello.dsp hello.pro //! [115] //! [116] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp //! [116] //! [117] win32 { SOURCES += hellowin.cpp } //! [117] //! [118] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp win32 { SOURCES += hellowin.cpp } unix { SOURCES += hellounix.cpp } //! [118] //! [119] !exists( main.cpp ) { error( "No main.cpp file found" ) } //! [119] //! [120] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp win32 { SOURCES += hellowin.cpp } unix { SOURCES += hellounix.cpp } !exists( main.cpp ) { error( "No main.cpp file found" ) } //! [120] //! [121] win32 { debug { CONFIG += console } } //! [121] //! [122] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp win32 { SOURCES += hellowin.cpp } unix { SOURCES += hellounix.cpp } !exists( main.cpp ) { error( "No main.cpp file found" ) } win32:debug { CONFIG += console } //! [122] //! [123] TEMPLATE = app DESTDIR = c:/helloapp HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp DEFINES += QT_DLL CONFIG += qt warn_on release //! [123] //! [124] make all //! [124] //! [125] make //! [125] //! [126] make install //! [126] //! [127] CONFIG(debug, debug|release) { mac: TARGET = $$join(TARGET,,,_debug) win32: TARGET = $$join(TARGET,,d) } //! [127] //! [128] DEPLOYMENT_PLUGIN += qjpeg //! [128]