Renderer: launch proximity filter job

Also added a manual test example

Change-Id: Ib560dcfdd5e0996cb40d892886c94212e3f8e32d
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>

5 files changed, 229 insertions, 1 deletions

diff --git a/tests/manual/manual.pro b/tests/manual/manual.pro
index 27faa9a6f..7c6d2390b 100644
--- a/tests/manual/manual.pro
+++ b/tests/manual/manual.pro
@@ -52,7 +52,8 @@ SUBDIRS += \
     anim-viewer \
     animation-keyframe-programmatic \
     layerfilter-qml \
-    skinned-mesh
+    skinned-mesh \
+    proximityfilter
 
 qtHaveModule(widgets): {
     SUBDIRS += \
diff --git a/tests/manual/proximityfilter/main.cpp b/tests/manual/proximityfilter/main.cpp
new file mode 100644
index 000000000..41d2f08a5
--- /dev/null
+++ b/tests/manual/proximityfilter/main.cpp
@@ -0,0 +1,63 @@
+/****************************************************************************
+**
+** Copyright (C) 2015 Klaralvdalens Datakonsult AB (KDAB).
+** Contact: https://www.qt.io/licensing/
+**
+** This file is part of the Qt3D module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and The Qt Company. For licensing terms
+** and conditions see https://www.qt.io/terms-conditions. For further
+** information use the contact form at https://www.qt.io/contact-us.
+**
+** BSD License Usage
+** Alternatively, you may use this file under the terms of the BSD license
+** as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of The Qt Company Ltd nor the names of its
+**     contributors may be used to endorse or promote products derived
+**     from this software without specific prior written permission.
+**
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <Qt3DQuickExtras/qt3dquickwindow.h>
+#include <QGuiApplication>
+
+int main(int argc, char* argv[])
+{
+    QGuiApplication app(argc, argv);
+    Qt3DExtras::Quick::Qt3DQuickWindow view;
+
+    view.setSource(QUrl("qrc:/main.qml"));
+    view.show();
+
+    return app.exec();
+}
diff --git a/tests/manual/proximityfilter/main.qml b/tests/manual/proximityfilter/main.qml
new file mode 100644
index 000000000..05c2e4415
--- /dev/null
+++ b/tests/manual/proximityfilter/main.qml
@@ -0,0 +1,148 @@
+/****************************************************************************
+**
+** Copyright (C) 2017 Klaralvdalens Datakonsult AB (KDAB).
+** Contact: https://www.qt.io/licensing/
+**
+** This file is part of the Qt3D module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and The Qt Company. For licensing terms
+** and conditions see https://www.qt.io/terms-conditions. For further
+** information use the contact form at https://www.qt.io/contact-us.
+**
+** BSD License Usage
+** Alternatively, you may use this file under the terms of the BSD license
+** as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of The Qt Company Ltd nor the names of its
+**     contributors may be used to endorse or promote products derived
+**     from this software without specific prior written permission.
+**
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+import QtQuick 2.9
+import Qt3D.Core 2.10
+import Qt3D.Render 2.10
+import Qt3D.Input 2.0
+import Qt3D.Extras 2.9
+
+Entity {
+    id: sceneRoot
+
+    Camera {
+        id: camera
+        projectionType: CameraLens.PerspectiveProjection
+        fieldOfView: 45
+        aspectRatio: 16/9
+        nearPlane : 0.1
+        farPlane : 1000.0
+        position: Qt.vector3d( 0.0, 0.0, 150.0 )
+        upVector: Qt.vector3d( 0.0, 1.0, 0.0 )
+        viewCenter: Qt.vector3d( 0.0, 0.0, 0.0 )
+    }
+
+    OrbitCameraController { camera: camera }
+
+    components: [
+        RenderSettings {
+            activeFrameGraph: RenderSurfaceSelector {
+                Viewport {
+                    normalizedRect: Qt.rect(0, 0, 1, 1)
+
+                    ClearBuffers {
+                        buffers: ClearBuffers.ColorDepthBuffer
+                        clearColor: Qt.rgba(0.6, 0.6, 0.6, 1.0)
+                        NoDraw {}
+                    }
+
+                    FrustumCulling {
+                        CameraSelector {
+                            camera: camera
+                            ProximityFilter {
+                                entity: proximityTarget
+                                distanceThreshold: 30
+                            }
+                        }
+                    }
+                }
+            }
+        },
+        // Event Source will be set by the Qt3DQuickWindow
+        InputSettings { }
+    ]
+
+    SphereMesh {
+        id: sphereMesh
+    }
+
+    PhongMaterial {
+        id: phongMaterial
+        diffuse: "orange"
+    }
+
+    NodeInstantiator {
+        id: instantiator
+        model: 64
+        Entity {
+            readonly property real angle: Math.PI * 2.0 * model.index % 8
+            readonly property real radius: 20
+            readonly property real verticalStep: 10
+            readonly property color meshColor: Qt.hsla(model.index / instantiator.count, 0.5, 0.5, 1.0);
+
+            readonly property Transform transform: Transform {
+                translation: Qt.vector3d(radius * Math.cos(angle),
+                                         (-(instantiator.count / (8 * 2)) + model.index / 8) * verticalStep,
+                                         radius * Math.sin(angle))
+            }
+            readonly property Material material: Material {
+                effect: phongMaterial.effect
+                parameters: Parameter { name: "kd"; value: meshColor }
+            }
+            readonly property SphereMesh mesh: sphereMesh
+            components: [ transform, mesh, material ]
+        }
+    }
+
+    Entity {
+        id: proximityTarget
+        readonly property Transform transform: Transform
+        {
+            property real y: 0;
+            SequentialAnimation on y {
+                NumberAnimation { from: -50; to: 50; duration: 2000; easing.type: Easing.InOutQuart }
+                NumberAnimation { from: 50; to: -50; duration: 2000; easing.type: Easing.InOutQuart }
+                loops: Animation.Infinite
+            }
+            translation: Qt.vector3d(0.0, y, 0.0)
+        }
+        components: [ sphereMesh, phongMaterial, transform ]
+    }
+}
diff --git a/tests/manual/proximityfilter/proximityfilter.pro b/tests/manual/proximityfilter/proximityfilter.pro
new file mode 100644
index 000000000..2e3f19157
--- /dev/null
+++ b/tests/manual/proximityfilter/proximityfilter.pro
@@ -0,0 +1,11 @@
+!include( ../manual.pri ) {
+    error( "Couldn't find the manual.pri file!" )
+}
+
+QT += 3dcore 3drender 3dinput 3dquick quick 3dquickextras
+
+SOURCES += \
+    main.cpp
+
+RESOURCES += \
+    proximityfilter.qrc
diff --git a/tests/manual/proximityfilter/proximityfilter.qrc b/tests/manual/proximityfilter/proximityfilter.qrc
new file mode 100644
index 000000000..5f6483ac3
--- /dev/null
+++ b/tests/manual/proximityfilter/proximityfilter.qrc
@@ -0,0 +1,5 @@
+<RCC>
+    <qresource prefix="/">
+        <file>main.qml</file>
+    </qresource>
+</RCC>