diff options
Diffstat (limited to 'src/3rdparty/assimp/code/ComputeUVMappingProcess.cpp')
-rw-r--r-- | src/3rdparty/assimp/code/ComputeUVMappingProcess.cpp | 798 |
1 files changed, 399 insertions, 399 deletions
diff --git a/src/3rdparty/assimp/code/ComputeUVMappingProcess.cpp b/src/3rdparty/assimp/code/ComputeUVMappingProcess.cpp index c25a17c20..2bbb30be8 100644 --- a/src/3rdparty/assimp/code/ComputeUVMappingProcess.cpp +++ b/src/3rdparty/assimp/code/ComputeUVMappingProcess.cpp @@ -2,11 +2,11 @@ Open Asset Import Library (assimp) ---------------------------------------------------------------------- -Copyright (c) 2006-2012, assimp team +Copyright (c) 2006-2016, assimp team All rights reserved. -Redistribution and use of this software in source and binary forms, -with or without modification, are permitted provided that the +Redistribution and use of this software in source and binary forms, +with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above @@ -23,16 +23,16 @@ following conditions are met: derived from this software without specific prior written permission of the assimp team. -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------- @@ -41,50 +41,50 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /** @file GenUVCoords step */ -#include "AssimpPCH.h" #include "ComputeUVMappingProcess.h" #include "ProcessHelper.h" +#include "Exceptional.h" using namespace Assimp; namespace { - const static aiVector3D base_axis_y(0.f,1.f,0.f); - const static aiVector3D base_axis_x(1.f,0.f,0.f); - const static aiVector3D base_axis_z(0.f,0.f,1.f); - const static float angle_epsilon = 0.95f; + const static aiVector3D base_axis_y(0.f,1.f,0.f); + const static aiVector3D base_axis_x(1.f,0.f,0.f); + const static aiVector3D base_axis_z(0.f,0.f,1.f); + const static float angle_epsilon = 0.95f; } // ------------------------------------------------------------------------------------------------ // Constructor to be privately used by Importer ComputeUVMappingProcess::ComputeUVMappingProcess() { - // nothing to do here + // nothing to do here } // ------------------------------------------------------------------------------------------------ // Destructor, private as well ComputeUVMappingProcess::~ComputeUVMappingProcess() { - // nothing to do here + // nothing to do here } // ------------------------------------------------------------------------------------------------ // Returns whether the processing step is present in the given flag field. bool ComputeUVMappingProcess::IsActive( unsigned int pFlags) const { - return (pFlags & aiProcess_GenUVCoords) != 0; + return (pFlags & aiProcess_GenUVCoords) != 0; } // ------------------------------------------------------------------------------------------------ // Check whether a ray intersects a plane and find the intersection point inline bool PlaneIntersect(const aiRay& ray, const aiVector3D& planePos, - const aiVector3D& planeNormal, aiVector3D& pos) + const aiVector3D& planeNormal, aiVector3D& pos) { - const float b = planeNormal * (planePos - ray.pos); - float h = ray.dir * planeNormal; + const float b = planeNormal * (planePos - ray.pos); + float h = ray.dir * planeNormal; if ((h < 10e-5f && h > -10e-5f) || (h = b/h) < 0) - return false; + return false; pos = ray.pos + (ray.dir * h); return true; @@ -94,411 +94,411 @@ inline bool PlaneIntersect(const aiRay& ray, const aiVector3D& planePos, // Find the first empty UV channel in a mesh inline unsigned int FindEmptyUVChannel (aiMesh* mesh) { - for (unsigned int m = 0; m < AI_MAX_NUMBER_OF_TEXTURECOORDS;++m) - if (!mesh->mTextureCoords[m])return m; - - DefaultLogger::get()->error("Unable to compute UV coordinates, no free UV slot found"); - return UINT_MAX; + for (unsigned int m = 0; m < AI_MAX_NUMBER_OF_TEXTURECOORDS;++m) + if (!mesh->mTextureCoords[m])return m; + + DefaultLogger::get()->error("Unable to compute UV coordinates, no free UV slot found"); + return UINT_MAX; } // ------------------------------------------------------------------------------------------------ // Try to remove UV seams void RemoveUVSeams (aiMesh* mesh, aiVector3D* out) { - // TODO: just a very rough algorithm. I think it could be done - // much easier, but I don't know how and am currently too tired to - // to think about a better solution. - - const static float LOWER_LIMIT = 0.1f; - const static float UPPER_LIMIT = 0.9f; - - const static float LOWER_EPSILON = 10e-3f; - const static float UPPER_EPSILON = 1.f-10e-3f; - - for (unsigned int fidx = 0; fidx < mesh->mNumFaces;++fidx) - { - const aiFace& face = mesh->mFaces[fidx]; - if (face.mNumIndices < 3) continue; // triangles and polygons only, please - - unsigned int small = face.mNumIndices, large = small; - bool zero = false, one = false, round_to_zero = false; - - // Check whether this face lies on a UV seam. We can just guess, - // but the assumption that a face with at least one very small - // on the one side and one very large U coord on the other side - // lies on a UV seam should work for most cases. - for (unsigned int n = 0; n < face.mNumIndices;++n) - { - if (out[face.mIndices[n]].x < LOWER_LIMIT) - { - small = n; - - // If we have a U value very close to 0 we can't - // round the others to 0, too. - if (out[face.mIndices[n]].x <= LOWER_EPSILON) - zero = true; - else round_to_zero = true; - } - if (out[face.mIndices[n]].x > UPPER_LIMIT) - { - large = n; - - // If we have a U value very close to 1 we can't - // round the others to 1, too. - if (out[face.mIndices[n]].x >= UPPER_EPSILON) - one = true; - } - } - if (small != face.mNumIndices && large != face.mNumIndices) - { - for (unsigned int n = 0; n < face.mNumIndices;++n) - { - // If the u value is over the upper limit and no other u - // value of that face is 0, round it to 0 - if (out[face.mIndices[n]].x > UPPER_LIMIT && !zero) - out[face.mIndices[n]].x = 0.f; - - // If the u value is below the lower limit and no other u - // value of that face is 1, round it to 1 - else if (out[face.mIndices[n]].x < LOWER_LIMIT && !one) - out[face.mIndices[n]].x = 1.f; - - // The face contains both 0 and 1 as UV coords. This can occur - // for faces which have an edge that lies directly on the seam. - // Due to numerical inaccuracies one U coord becomes 0, the - // other 1. But we do still have a third UV coord to determine - // to which side we must round to. - else if (one && zero) - { - if (round_to_zero && out[face.mIndices[n]].x >= UPPER_EPSILON) - out[face.mIndices[n]].x = 0.f; - else if (!round_to_zero && out[face.mIndices[n]].x <= LOWER_EPSILON) - out[face.mIndices[n]].x = 1.f; - } - } - } - } + // TODO: just a very rough algorithm. I think it could be done + // much easier, but I don't know how and am currently too tired to + // to think about a better solution. + + const static float LOWER_LIMIT = 0.1f; + const static float UPPER_LIMIT = 0.9f; + + const static float LOWER_EPSILON = 10e-3f; + const static float UPPER_EPSILON = 1.f-10e-3f; + + for (unsigned int fidx = 0; fidx < mesh->mNumFaces;++fidx) + { + const aiFace& face = mesh->mFaces[fidx]; + if (face.mNumIndices < 3) continue; // triangles and polygons only, please + + unsigned int small = face.mNumIndices, large = small; + bool zero = false, one = false, round_to_zero = false; + + // Check whether this face lies on a UV seam. We can just guess, + // but the assumption that a face with at least one very small + // on the one side and one very large U coord on the other side + // lies on a UV seam should work for most cases. + for (unsigned int n = 0; n < face.mNumIndices;++n) + { + if (out[face.mIndices[n]].x < LOWER_LIMIT) + { + small = n; + + // If we have a U value very close to 0 we can't + // round the others to 0, too. + if (out[face.mIndices[n]].x <= LOWER_EPSILON) + zero = true; + else round_to_zero = true; + } + if (out[face.mIndices[n]].x > UPPER_LIMIT) + { + large = n; + + // If we have a U value very close to 1 we can't + // round the others to 1, too. + if (out[face.mIndices[n]].x >= UPPER_EPSILON) + one = true; + } + } + if (small != face.mNumIndices && large != face.mNumIndices) + { + for (unsigned int n = 0; n < face.mNumIndices;++n) + { + // If the u value is over the upper limit and no other u + // value of that face is 0, round it to 0 + if (out[face.mIndices[n]].x > UPPER_LIMIT && !zero) + out[face.mIndices[n]].x = 0.f; + + // If the u value is below the lower limit and no other u + // value of that face is 1, round it to 1 + else if (out[face.mIndices[n]].x < LOWER_LIMIT && !one) + out[face.mIndices[n]].x = 1.f; + + // The face contains both 0 and 1 as UV coords. This can occur + // for faces which have an edge that lies directly on the seam. + // Due to numerical inaccuracies one U coord becomes 0, the + // other 1. But we do still have a third UV coord to determine + // to which side we must round to. + else if (one && zero) + { + if (round_to_zero && out[face.mIndices[n]].x >= UPPER_EPSILON) + out[face.mIndices[n]].x = 0.f; + else if (!round_to_zero && out[face.mIndices[n]].x <= LOWER_EPSILON) + out[face.mIndices[n]].x = 1.f; + } + } + } + } } // ------------------------------------------------------------------------------------------------ void ComputeUVMappingProcess::ComputeSphereMapping(aiMesh* mesh,const aiVector3D& axis, aiVector3D* out) { - aiVector3D center, min, max; - FindMeshCenter(mesh, center, min, max); - - // If the axis is one of x,y,z run a faster code path. It's worth the extra effort ... - // currently the mapping axis will always be one of x,y,z, except if the - // PretransformVertices step is used (it transforms the meshes into worldspace, - // thus changing the mapping axis) - if (axis * base_axis_x >= angle_epsilon) { - - // For each point get a normalized projection vector in the sphere, - // get its longitude and latitude and map them to their respective - // UV axes. Problems occur around the poles ... unsolvable. - // - // The spherical coordinate system looks like this: - // x = std::cos(lon)*std::cos(lat) - // y = std::sin(lon)*std::cos(lat) - // z = std::sin(lat) - // - // Thus we can derive: - // lat = arcsin (z) - // lon = arctan (y/x) - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D diff = (mesh->mVertices[pnt]-center).Normalize(); - out[pnt] = aiVector3D((atan2 (diff.z, diff.y) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, - (std::asin (diff.x) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); - } - } - else if (axis * base_axis_y >= angle_epsilon) { - // ... just the same again - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D diff = (mesh->mVertices[pnt]-center).Normalize(); - out[pnt] = aiVector3D((atan2 (diff.x, diff.z) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, - (std::asin (diff.y) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); - } - } - else if (axis * base_axis_z >= angle_epsilon) { - // ... just the same again - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D diff = (mesh->mVertices[pnt]-center).Normalize(); - out[pnt] = aiVector3D((atan2 (diff.y, diff.x) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, - (std::asin (diff.z) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); - } - } - // slower code path in case the mapping axis is not one of the coordinate system axes - else { - aiMatrix4x4 mTrafo; - aiMatrix4x4::FromToMatrix(axis,base_axis_y,mTrafo); - - // again the same, except we're applying a transformation now - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D diff = ((mTrafo*mesh->mVertices[pnt])-center).Normalize(); - out[pnt] = aiVector3D((atan2 (diff.y, diff.x) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, - (std::asin (diff.z) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); - } - } - - - // Now find and remove UV seams. A seam occurs if a face has a tcoord - // close to zero on the one side, and a tcoord close to one on the - // other side. - RemoveUVSeams(mesh,out); + aiVector3D center, min, max; + FindMeshCenter(mesh, center, min, max); + + // If the axis is one of x,y,z run a faster code path. It's worth the extra effort ... + // currently the mapping axis will always be one of x,y,z, except if the + // PretransformVertices step is used (it transforms the meshes into worldspace, + // thus changing the mapping axis) + if (axis * base_axis_x >= angle_epsilon) { + + // For each point get a normalized projection vector in the sphere, + // get its longitude and latitude and map them to their respective + // UV axes. Problems occur around the poles ... unsolvable. + // + // The spherical coordinate system looks like this: + // x = cos(lon)*cos(lat) + // y = sin(lon)*cos(lat) + // z = sin(lat) + // + // Thus we can derive: + // lat = arcsin (z) + // lon = arctan (y/x) + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D diff = (mesh->mVertices[pnt]-center).Normalize(); + out[pnt] = aiVector3D((atan2 (diff.z, diff.y) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, + (std::asin (diff.x) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); + } + } + else if (axis * base_axis_y >= angle_epsilon) { + // ... just the same again + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D diff = (mesh->mVertices[pnt]-center).Normalize(); + out[pnt] = aiVector3D((atan2 (diff.x, diff.z) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, + (std::asin (diff.y) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); + } + } + else if (axis * base_axis_z >= angle_epsilon) { + // ... just the same again + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D diff = (mesh->mVertices[pnt]-center).Normalize(); + out[pnt] = aiVector3D((atan2 (diff.y, diff.x) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, + (std::asin (diff.z) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); + } + } + // slower code path in case the mapping axis is not one of the coordinate system axes + else { + aiMatrix4x4 mTrafo; + aiMatrix4x4::FromToMatrix(axis,base_axis_y,mTrafo); + + // again the same, except we're applying a transformation now + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D diff = ((mTrafo*mesh->mVertices[pnt])-center).Normalize(); + out[pnt] = aiVector3D((atan2 (diff.y, diff.x) + AI_MATH_PI_F ) / AI_MATH_TWO_PI_F, + (asin (diff.z) + AI_MATH_HALF_PI_F) / AI_MATH_PI_F, 0.f); + } + } + + + // Now find and remove UV seams. A seam occurs if a face has a tcoord + // close to zero on the one side, and a tcoord close to one on the + // other side. + RemoveUVSeams(mesh,out); } // ------------------------------------------------------------------------------------------------ void ComputeUVMappingProcess::ComputeCylinderMapping(aiMesh* mesh,const aiVector3D& axis, aiVector3D* out) { - aiVector3D center, min, max; - - // If the axis is one of x,y,z run a faster code path. It's worth the extra effort ... - // currently the mapping axis will always be one of x,y,z, except if the - // PretransformVertices step is used (it transforms the meshes into worldspace, - // thus changing the mapping axis) - if (axis * base_axis_x >= angle_epsilon) { - FindMeshCenter(mesh, center, min, max); - const float diff = max.x - min.x; - - // If the main axis is 'z', the z coordinate of a point 'p' is mapped - // directly to the texture V axis. The other axis is derived from - // the angle between ( p.x - c.x, p.y - c.y ) and (1,0), where - // 'c' is the center point of the mesh. - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D& pos = mesh->mVertices[pnt]; - aiVector3D& uv = out[pnt]; - - uv.y = (pos.x - min.x) / diff; - uv.x = (atan2 ( pos.z - center.z, pos.y - center.y) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; - } - } - else if (axis * base_axis_y >= angle_epsilon) { - FindMeshCenter(mesh, center, min, max); - const float diff = max.y - min.y; - - // just the same ... - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D& pos = mesh->mVertices[pnt]; - aiVector3D& uv = out[pnt]; - - uv.y = (pos.y - min.y) / diff; - uv.x = (atan2 ( pos.x - center.x, pos.z - center.z) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; - } - } - else if (axis * base_axis_z >= angle_epsilon) { - FindMeshCenter(mesh, center, min, max); - const float diff = max.z - min.z; - - // just the same ... - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D& pos = mesh->mVertices[pnt]; - aiVector3D& uv = out[pnt]; - - uv.y = (pos.z - min.z) / diff; - uv.x = (atan2 ( pos.y - center.y, pos.x - center.x) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; - } - } - // slower code path in case the mapping axis is not one of the coordinate system axes - else { - aiMatrix4x4 mTrafo; - aiMatrix4x4::FromToMatrix(axis,base_axis_y,mTrafo); - FindMeshCenterTransformed(mesh, center, min, max,mTrafo); - const float diff = max.y - min.y; - - // again the same, except we're applying a transformation now - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt){ - const aiVector3D pos = mTrafo* mesh->mVertices[pnt]; - aiVector3D& uv = out[pnt]; - - uv.y = (pos.y - min.y) / diff; - uv.x = (atan2 ( pos.x - center.x, pos.z - center.z) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; - } - } - - // Now find and remove UV seams. A seam occurs if a face has a tcoord - // close to zero on the one side, and a tcoord close to one on the - // other side. - RemoveUVSeams(mesh,out); + aiVector3D center, min, max; + + // If the axis is one of x,y,z run a faster code path. It's worth the extra effort ... + // currently the mapping axis will always be one of x,y,z, except if the + // PretransformVertices step is used (it transforms the meshes into worldspace, + // thus changing the mapping axis) + if (axis * base_axis_x >= angle_epsilon) { + FindMeshCenter(mesh, center, min, max); + const float diff = max.x - min.x; + + // If the main axis is 'z', the z coordinate of a point 'p' is mapped + // directly to the texture V axis. The other axis is derived from + // the angle between ( p.x - c.x, p.y - c.y ) and (1,0), where + // 'c' is the center point of the mesh. + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D& pos = mesh->mVertices[pnt]; + aiVector3D& uv = out[pnt]; + + uv.y = (pos.x - min.x) / diff; + uv.x = (atan2 ( pos.z - center.z, pos.y - center.y) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; + } + } + else if (axis * base_axis_y >= angle_epsilon) { + FindMeshCenter(mesh, center, min, max); + const float diff = max.y - min.y; + + // just the same ... + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D& pos = mesh->mVertices[pnt]; + aiVector3D& uv = out[pnt]; + + uv.y = (pos.y - min.y) / diff; + uv.x = (atan2 ( pos.x - center.x, pos.z - center.z) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; + } + } + else if (axis * base_axis_z >= angle_epsilon) { + FindMeshCenter(mesh, center, min, max); + const float diff = max.z - min.z; + + // just the same ... + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D& pos = mesh->mVertices[pnt]; + aiVector3D& uv = out[pnt]; + + uv.y = (pos.z - min.z) / diff; + uv.x = (atan2 ( pos.y - center.y, pos.x - center.x) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; + } + } + // slower code path in case the mapping axis is not one of the coordinate system axes + else { + aiMatrix4x4 mTrafo; + aiMatrix4x4::FromToMatrix(axis,base_axis_y,mTrafo); + FindMeshCenterTransformed(mesh, center, min, max,mTrafo); + const float diff = max.y - min.y; + + // again the same, except we're applying a transformation now + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt){ + const aiVector3D pos = mTrafo* mesh->mVertices[pnt]; + aiVector3D& uv = out[pnt]; + + uv.y = (pos.y - min.y) / diff; + uv.x = (atan2 ( pos.x - center.x, pos.z - center.z) +(float)AI_MATH_PI ) / (float)AI_MATH_TWO_PI; + } + } + + // Now find and remove UV seams. A seam occurs if a face has a tcoord + // close to zero on the one side, and a tcoord close to one on the + // other side. + RemoveUVSeams(mesh,out); } // ------------------------------------------------------------------------------------------------ void ComputeUVMappingProcess::ComputePlaneMapping(aiMesh* mesh,const aiVector3D& axis, aiVector3D* out) { - float diffu,diffv; - aiVector3D center, min, max; - - // If the axis is one of x,y,z run a faster code path. It's worth the extra effort ... - // currently the mapping axis will always be one of x,y,z, except if the - // PretransformVertices step is used (it transforms the meshes into worldspace, - // thus changing the mapping axis) - if (axis * base_axis_x >= angle_epsilon) { - FindMeshCenter(mesh, center, min, max); - diffu = max.z - min.z; - diffv = max.y - min.y; - - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D& pos = mesh->mVertices[pnt]; - out[pnt].Set((pos.z - min.z) / diffu,(pos.y - min.y) / diffv,0.f); - } - } - else if (axis * base_axis_y >= angle_epsilon) { - FindMeshCenter(mesh, center, min, max); - diffu = max.x - min.x; - diffv = max.z - min.z; - - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D& pos = mesh->mVertices[pnt]; - out[pnt].Set((pos.x - min.x) / diffu,(pos.z - min.z) / diffv,0.f); - } - } - else if (axis * base_axis_z >= angle_epsilon) { - FindMeshCenter(mesh, center, min, max); - diffu = max.y - min.y; - diffv = max.z - min.z; - - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D& pos = mesh->mVertices[pnt]; - out[pnt].Set((pos.y - min.y) / diffu,(pos.x - min.x) / diffv,0.f); - } - } - // slower code path in case the mapping axis is not one of the coordinate system axes - else - { - aiMatrix4x4 mTrafo; - aiMatrix4x4::FromToMatrix(axis,base_axis_y,mTrafo); - FindMeshCenterTransformed(mesh, center, min, max,mTrafo); - diffu = max.x - min.x; - diffv = max.z - min.z; - - // again the same, except we're applying a transformation now - for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { - const aiVector3D pos = mTrafo * mesh->mVertices[pnt]; - out[pnt].Set((pos.x - min.x) / diffu,(pos.z - min.z) / diffv,0.f); - } - } - - // shouldn't be necessary to remove UV seams ... + float diffu,diffv; + aiVector3D center, min, max; + + // If the axis is one of x,y,z run a faster code path. It's worth the extra effort ... + // currently the mapping axis will always be one of x,y,z, except if the + // PretransformVertices step is used (it transforms the meshes into worldspace, + // thus changing the mapping axis) + if (axis * base_axis_x >= angle_epsilon) { + FindMeshCenter(mesh, center, min, max); + diffu = max.z - min.z; + diffv = max.y - min.y; + + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D& pos = mesh->mVertices[pnt]; + out[pnt].Set((pos.z - min.z) / diffu,(pos.y - min.y) / diffv,0.f); + } + } + else if (axis * base_axis_y >= angle_epsilon) { + FindMeshCenter(mesh, center, min, max); + diffu = max.x - min.x; + diffv = max.z - min.z; + + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D& pos = mesh->mVertices[pnt]; + out[pnt].Set((pos.x - min.x) / diffu,(pos.z - min.z) / diffv,0.f); + } + } + else if (axis * base_axis_z >= angle_epsilon) { + FindMeshCenter(mesh, center, min, max); + diffu = max.y - min.y; + diffv = max.z - min.z; + + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D& pos = mesh->mVertices[pnt]; + out[pnt].Set((pos.y - min.y) / diffu,(pos.x - min.x) / diffv,0.f); + } + } + // slower code path in case the mapping axis is not one of the coordinate system axes + else + { + aiMatrix4x4 mTrafo; + aiMatrix4x4::FromToMatrix(axis,base_axis_y,mTrafo); + FindMeshCenterTransformed(mesh, center, min, max,mTrafo); + diffu = max.x - min.x; + diffv = max.z - min.z; + + // again the same, except we're applying a transformation now + for (unsigned int pnt = 0; pnt < mesh->mNumVertices;++pnt) { + const aiVector3D pos = mTrafo * mesh->mVertices[pnt]; + out[pnt].Set((pos.x - min.x) / diffu,(pos.z - min.z) / diffv,0.f); + } + } + + // shouldn't be necessary to remove UV seams ... } // ------------------------------------------------------------------------------------------------ void ComputeUVMappingProcess::ComputeBoxMapping( aiMesh*, aiVector3D* ) { - DefaultLogger::get()->error("Mapping type currently not implemented"); + DefaultLogger::get()->error("Mapping type currently not implemented"); } // ------------------------------------------------------------------------------------------------ -void ComputeUVMappingProcess::Execute( aiScene* pScene) +void ComputeUVMappingProcess::Execute( aiScene* pScene) { - DefaultLogger::get()->debug("GenUVCoordsProcess begin"); - char buffer[1024]; - - if (pScene->mFlags & AI_SCENE_FLAGS_NON_VERBOSE_FORMAT) - throw DeadlyImportError("Post-processing order mismatch: expecting pseudo-indexed (\"verbose\") vertices here"); - - std::list<MappingInfo> mappingStack; - - /* Iterate through all materials and search for non-UV mapped textures - */ - for (unsigned int i = 0; i < pScene->mNumMaterials;++i) - { - mappingStack.clear(); - aiMaterial* mat = pScene->mMaterials[i]; - for (unsigned int a = 0; a < mat->mNumProperties;++a) - { - aiMaterialProperty* prop = mat->mProperties[a]; - if (!::strcmp( prop->mKey.data, "$tex.mapping")) - { - aiTextureMapping& mapping = *((aiTextureMapping*)prop->mData); - if (aiTextureMapping_UV != mapping) - { - if (!DefaultLogger::isNullLogger()) - { - sprintf(buffer, "Found non-UV mapped texture (%s,%i). Mapping type: %s", - TextureTypeToString((aiTextureType)prop->mSemantic),prop->mIndex, - MappingTypeToString(mapping)); - - DefaultLogger::get()->info(buffer); - } - - if (aiTextureMapping_OTHER == mapping) - continue; - - MappingInfo info (mapping); - - // Get further properties - currently only the major axis - for (unsigned int a2 = 0; a2 < mat->mNumProperties;++a2) - { - aiMaterialProperty* prop2 = mat->mProperties[a2]; - if (prop2->mSemantic != prop->mSemantic || prop2->mIndex != prop->mIndex) - continue; - - if ( !::strcmp( prop2->mKey.data, "$tex.mapaxis")) { - info.axis = *((aiVector3D*)prop2->mData); - break; - } - } - - unsigned int idx; - - // Check whether we have this mapping mode already - std::list<MappingInfo>::iterator it = std::find (mappingStack.begin(),mappingStack.end(), info); - if (mappingStack.end() != it) - { - idx = (*it).uv; - } - else - { - /* We have found a non-UV mapped texture. Now - * we need to find all meshes using this material - * that we can compute UV channels for them. - */ - for (unsigned int m = 0; m < pScene->mNumMeshes;++m) - { - aiMesh* mesh = pScene->mMeshes[m]; - unsigned int outIdx; - if ( mesh->mMaterialIndex != i || ( outIdx = FindEmptyUVChannel(mesh) ) == UINT_MAX || - !mesh->mNumVertices) - { - continue; - } - - // Allocate output storage - aiVector3D* p = mesh->mTextureCoords[outIdx] = new aiVector3D[mesh->mNumVertices]; - - switch (mapping) - { - case aiTextureMapping_SPHERE: - ComputeSphereMapping(mesh,info.axis,p); - break; - case aiTextureMapping_CYLINDER: - ComputeCylinderMapping(mesh,info.axis,p); - break; - case aiTextureMapping_PLANE: - ComputePlaneMapping(mesh,info.axis,p); - break; - case aiTextureMapping_BOX: - ComputeBoxMapping(mesh,p); - break; - default: - ai_assert(false); - } - if (m && idx != outIdx) - { - DefaultLogger::get()->warn("UV index mismatch. Not all meshes assigned to " - "this material have equal numbers of UV channels. The UV index stored in " - "the material structure does therefore not apply for all meshes. "); - } - idx = outIdx; - } - info.uv = idx; - mappingStack.push_back(info); - } - - // Update the material property list - mapping = aiTextureMapping_UV; - ((aiMaterial*)mat)->AddProperty(&idx,1,AI_MATKEY_UVWSRC(prop->mSemantic,prop->mIndex)); - } - } - } - } - DefaultLogger::get()->debug("GenUVCoordsProcess finished"); + DefaultLogger::get()->debug("GenUVCoordsProcess begin"); + char buffer[1024]; + + if (pScene->mFlags & AI_SCENE_FLAGS_NON_VERBOSE_FORMAT) + throw DeadlyImportError("Post-processing order mismatch: expecting pseudo-indexed (\"verbose\") vertices here"); + + std::list<MappingInfo> mappingStack; + + /* Iterate through all materials and search for non-UV mapped textures + */ + for (unsigned int i = 0; i < pScene->mNumMaterials;++i) + { + mappingStack.clear(); + aiMaterial* mat = pScene->mMaterials[i]; + for (unsigned int a = 0; a < mat->mNumProperties;++a) + { + aiMaterialProperty* prop = mat->mProperties[a]; + if (!::strcmp( prop->mKey.data, "$tex.mapping")) + { + aiTextureMapping& mapping = *((aiTextureMapping*)prop->mData); + if (aiTextureMapping_UV != mapping) + { + if (!DefaultLogger::isNullLogger()) + { + ai_snprintf(buffer, 1024, "Found non-UV mapped texture (%s,%u). Mapping type: %s", + TextureTypeToString((aiTextureType)prop->mSemantic),prop->mIndex, + MappingTypeToString(mapping)); + + DefaultLogger::get()->info(buffer); + } + + if (aiTextureMapping_OTHER == mapping) + continue; + + MappingInfo info (mapping); + + // Get further properties - currently only the major axis + for (unsigned int a2 = 0; a2 < mat->mNumProperties;++a2) + { + aiMaterialProperty* prop2 = mat->mProperties[a2]; + if (prop2->mSemantic != prop->mSemantic || prop2->mIndex != prop->mIndex) + continue; + + if ( !::strcmp( prop2->mKey.data, "$tex.mapaxis")) { + info.axis = *((aiVector3D*)prop2->mData); + break; + } + } + + unsigned int idx; + + // Check whether we have this mapping mode already + std::list<MappingInfo>::iterator it = std::find (mappingStack.begin(),mappingStack.end(), info); + if (mappingStack.end() != it) + { + idx = (*it).uv; + } + else + { + /* We have found a non-UV mapped texture. Now + * we need to find all meshes using this material + * that we can compute UV channels for them. + */ + for (unsigned int m = 0; m < pScene->mNumMeshes;++m) + { + aiMesh* mesh = pScene->mMeshes[m]; + unsigned int outIdx = 0; + if ( mesh->mMaterialIndex != i || ( outIdx = FindEmptyUVChannel(mesh) ) == UINT_MAX || + !mesh->mNumVertices) + { + continue; + } + + // Allocate output storage + aiVector3D* p = mesh->mTextureCoords[outIdx] = new aiVector3D[mesh->mNumVertices]; + + switch (mapping) + { + case aiTextureMapping_SPHERE: + ComputeSphereMapping(mesh,info.axis,p); + break; + case aiTextureMapping_CYLINDER: + ComputeCylinderMapping(mesh,info.axis,p); + break; + case aiTextureMapping_PLANE: + ComputePlaneMapping(mesh,info.axis,p); + break; + case aiTextureMapping_BOX: + ComputeBoxMapping(mesh,p); + break; + default: + ai_assert(false); + } + if (m && idx != outIdx) + { + DefaultLogger::get()->warn("UV index mismatch. Not all meshes assigned to " + "this material have equal numbers of UV channels. The UV index stored in " + "the material structure does therefore not apply for all meshes. "); + } + idx = outIdx; + } + info.uv = idx; + mappingStack.push_back(info); + } + + // Update the material property list + mapping = aiTextureMapping_UV; + ((aiMaterial*)mat)->AddProperty(&idx,1,AI_MATKEY_UVWSRC(prop->mSemantic,prop->mIndex)); + } + } + } + } + DefaultLogger::get()->debug("GenUVCoordsProcess finished"); } |