diff options
Diffstat (limited to 'src/3rdparty/assimp/code/IFCLoader.cpp')
| -rw-r--r-- | src/3rdparty/assimp/code/IFCLoader.cpp | 1508 |
1 files changed, 754 insertions, 754 deletions
diff --git a/src/3rdparty/assimp/code/IFCLoader.cpp b/src/3rdparty/assimp/code/IFCLoader.cpp index 9963ce70a..34977f5b0 100644 --- a/src/3rdparty/assimp/code/IFCLoader.cpp +++ b/src/3rdparty/assimp/code/IFCLoader.cpp @@ -2,11 +2,11 @@ Open Asset Import Library (assimp) ---------------------------------------------------------------------- -Copyright (c) 2006-2012, assimp team +Copyright (c) 2006-2016, assimp team All rights reserved. -Redistribution and use of this software in source and binary forms, -with or without modification, are permitted provided that the +Redistribution and use of this software in source and binary forms, +with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above @@ -23,16 +23,16 @@ following conditions are met: derived from this software without specific prior written permission of the assimp team. -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------- @@ -41,15 +41,16 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /** @file IFCLoad.cpp * @brief Implementation of the Industry Foundation Classes loader. */ -#include "AssimpPCH.h" + #ifndef ASSIMP_BUILD_NO_IFC_IMPORTER #include <iterator> -#include <boost/tuple/tuple.hpp> +#include <limits> +#include <tuple> #ifndef ASSIMP_BUILD_NO_COMPRESSED_IFC -# include "../contrib/unzip/unzip.h" +# include <contrib/unzip/unzip.h> #endif #include "IFCLoader.h" @@ -59,9 +60,12 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #include "StreamReader.h" #include "MemoryIOWrapper.h" +#include <assimp/scene.h> +#include <assimp/Importer.hpp> + namespace Assimp { - template<> const std::string LogFunctions<IFCImporter>::log_prefix = "IFC: "; + template<> const std::string LogFunctions<IFCImporter>::log_prefix = "IFC: "; } using namespace Assimp; @@ -89,24 +93,22 @@ namespace { void SetUnits(ConversionData& conv); void SetCoordinateSpace(ConversionData& conv); void ProcessSpatialStructures(ConversionData& conv); -aiNode* ProcessSpatialStructure(aiNode* parent, const IfcProduct& el ,ConversionData& conv); -void ProcessProductRepresentation(const IfcProduct& el, aiNode* nd, ConversionData& conv); void MakeTreeRelative(ConversionData& conv); void ConvertUnit(const EXPRESS::DataType& dt,ConversionData& conv); } // anon static const aiImporterDesc desc = { - "Industry Foundation Classes (IFC) Importer", - "", - "", - "", - aiImporterFlags_SupportBinaryFlavour, - 0, - 0, - 0, - 0, - "ifc ifczip" + "Industry Foundation Classes (IFC) Importer", + "", + "", + "", + aiImporterFlags_SupportBinaryFlavour, + 0, + 0, + 0, + 0, + "ifc ifczip" }; @@ -116,35 +118,35 @@ IFCImporter::IFCImporter() {} // ------------------------------------------------------------------------------------------------ -// Destructor, private as well +// Destructor, private as well IFCImporter::~IFCImporter() { } // ------------------------------------------------------------------------------------------------ -// Returns whether the class can handle the format of the given file. +// Returns whether the class can handle the format of the given file. bool IFCImporter::CanRead( const std::string& pFile, IOSystem* pIOHandler, bool checkSig) const { - const std::string& extension = GetExtension(pFile); - if (extension == "ifc" || extension == "ifczip") { - return true; - } - - else if ((!extension.length() || checkSig) && pIOHandler) { - // note: this is the common identification for STEP-encoded files, so - // it is only unambiguous as long as we don't support any further - // file formats with STEP as their encoding. - const char* tokens[] = {"ISO-10303-21"}; - return SearchFileHeaderForToken(pIOHandler,pFile,tokens,1); - } - return false; + const std::string& extension = GetExtension(pFile); + if (extension == "ifc" || extension == "ifczip") { + return true; + } + + else if ((!extension.length() || checkSig) && pIOHandler) { + // note: this is the common identification for STEP-encoded files, so + // it is only unambiguous as long as we don't support any further + // file formats with STEP as their encoding. + const char* tokens[] = {"ISO-10303-21"}; + return SearchFileHeaderForToken(pIOHandler,pFile,tokens,1); + } + return false; } // ------------------------------------------------------------------------------------------------ // List all extensions handled by this loader const aiImporterDesc* IFCImporter::GetInfo () const { - return &desc; + return &desc; } @@ -152,167 +154,167 @@ const aiImporterDesc* IFCImporter::GetInfo () const // Setup configuration properties for the loader void IFCImporter::SetupProperties(const Importer* pImp) { - settings.skipSpaceRepresentations = pImp->GetPropertyBool(AI_CONFIG_IMPORT_IFC_SKIP_SPACE_REPRESENTATIONS,true); - settings.skipCurveRepresentations = pImp->GetPropertyBool(AI_CONFIG_IMPORT_IFC_SKIP_CURVE_REPRESENTATIONS,true); - settings.useCustomTriangulation = pImp->GetPropertyBool(AI_CONFIG_IMPORT_IFC_CUSTOM_TRIANGULATION,true); + settings.skipSpaceRepresentations = pImp->GetPropertyBool(AI_CONFIG_IMPORT_IFC_SKIP_SPACE_REPRESENTATIONS,true); + settings.skipCurveRepresentations = pImp->GetPropertyBool(AI_CONFIG_IMPORT_IFC_SKIP_CURVE_REPRESENTATIONS,true); + settings.useCustomTriangulation = pImp->GetPropertyBool(AI_CONFIG_IMPORT_IFC_CUSTOM_TRIANGULATION,true); - settings.conicSamplingAngle = 10.f; - settings.skipAnnotations = true; + settings.conicSamplingAngle = 10.f; + settings.skipAnnotations = true; } // ------------------------------------------------------------------------------------------------ -// Imports the given file into the given scene structure. -void IFCImporter::InternReadFile( const std::string& pFile, - aiScene* pScene, IOSystem* pIOHandler) +// Imports the given file into the given scene structure. +void IFCImporter::InternReadFile( const std::string& pFile, + aiScene* pScene, IOSystem* pIOHandler) { - boost::shared_ptr<IOStream> stream(pIOHandler->Open(pFile)); - if (!stream) { - ThrowException("Could not open file for reading"); - } + std::shared_ptr<IOStream> stream(pIOHandler->Open(pFile)); + if (!stream) { + ThrowException("Could not open file for reading"); + } - // if this is a ifczip file, decompress its contents first - if(GetExtension(pFile) == "ifczip") { + // if this is a ifczip file, decompress its contents first + if(GetExtension(pFile) == "ifczip") { #ifndef ASSIMP_BUILD_NO_COMPRESSED_IFC - unzFile zip = unzOpen( pFile.c_str() ); - if(zip == NULL) { - ThrowException("Could not open ifczip file for reading, unzip failed"); - } - - // chop 'zip' postfix - std::string fileName = pFile.substr(0,pFile.length() - 3); - - std::string::size_type s = pFile.find_last_of('\\'); - if(s == std::string::npos) { - s = pFile.find_last_of('/'); - } - if(s != std::string::npos) { - fileName = fileName.substr(s+1); - } - - // search file (same name as the IFCZIP except for the file extension) and place file pointer there - if(UNZ_OK == unzGoToFirstFile(zip)) { - do { - // get file size, etc. - unz_file_info fileInfo; - char filename[256]; - unzGetCurrentFileInfo( zip , &fileInfo, filename, sizeof(filename), 0, 0, 0, 0 ); - if (GetExtension(filename) != "ifc") { - continue; - } - uint8_t* buff = new uint8_t[fileInfo.uncompressed_size]; - LogInfo("Decompressing IFCZIP file"); - unzOpenCurrentFile( zip ); - const int ret = unzReadCurrentFile( zip, buff, fileInfo.uncompressed_size); - size_t filesize = fileInfo.uncompressed_size; - if ( ret < 0 || size_t(ret) != filesize ) - { - delete[] buff; - ThrowException("Failed to decompress IFC ZIP file"); - } - unzCloseCurrentFile( zip ); - stream.reset(new MemoryIOStream(buff,fileInfo.uncompressed_size,true)); - break; - - if (unzGoToNextFile(zip) == UNZ_END_OF_LIST_OF_FILE) { - ThrowException("Found no IFC file member in IFCZIP file (1)"); - } - - } while(true); - } - else { - ThrowException("Found no IFC file member in IFCZIP file (2)"); - } - - unzClose(zip); + unzFile zip = unzOpen( pFile.c_str() ); + if(zip == NULL) { + ThrowException("Could not open ifczip file for reading, unzip failed"); + } + + // chop 'zip' postfix + std::string fileName = pFile.substr(0,pFile.length() - 3); + + std::string::size_type s = pFile.find_last_of('\\'); + if(s == std::string::npos) { + s = pFile.find_last_of('/'); + } + if(s != std::string::npos) { + fileName = fileName.substr(s+1); + } + + // search file (same name as the IFCZIP except for the file extension) and place file pointer there + if(UNZ_OK == unzGoToFirstFile(zip)) { + do { + // get file size, etc. + unz_file_info fileInfo; + char filename[256]; + unzGetCurrentFileInfo( zip , &fileInfo, filename, sizeof(filename), 0, 0, 0, 0 ); + if (GetExtension(filename) != "ifc") { + continue; + } + uint8_t* buff = new uint8_t[fileInfo.uncompressed_size]; + LogInfo("Decompressing IFCZIP file"); + unzOpenCurrentFile( zip ); + const int ret = unzReadCurrentFile( zip, buff, fileInfo.uncompressed_size); + size_t filesize = fileInfo.uncompressed_size; + if ( ret < 0 || size_t(ret) != filesize ) + { + delete[] buff; + ThrowException("Failed to decompress IFC ZIP file"); + } + unzCloseCurrentFile( zip ); + stream.reset(new MemoryIOStream(buff,fileInfo.uncompressed_size,true)); + break; + + if (unzGoToNextFile(zip) == UNZ_END_OF_LIST_OF_FILE) { + ThrowException("Found no IFC file member in IFCZIP file (1)"); + } + + } while(true); + } + else { + ThrowException("Found no IFC file member in IFCZIP file (2)"); + } + + unzClose(zip); #else - ThrowException("Could not open ifczip file for reading, assimp was built without ifczip support"); + ThrowException("Could not open ifczip file for reading, assimp was built without ifczip support"); #endif - } - - boost::scoped_ptr<STEP::DB> db(STEP::ReadFileHeader(stream)); - const STEP::HeaderInfo& head = static_cast<const STEP::DB&>(*db).GetHeader(); - - if(!head.fileSchema.size() || head.fileSchema.substr(0,3) != "IFC") { - ThrowException("Unrecognized file schema: " + head.fileSchema); - } - - if (!DefaultLogger::isNullLogger()) { - LogDebug("File schema is \'" + head.fileSchema + '\''); - if (head.timestamp.length()) { - LogDebug("Timestamp \'" + head.timestamp + '\''); - } - if (head.app.length()) { - LogDebug("Application/Exporter identline is \'" + head.app + '\''); - } - } - - // obtain a copy of the machine-generated IFC scheme - EXPRESS::ConversionSchema schema; - GetSchema(schema); - - // tell the reader which entity types to track with special care - static const char* const types_to_track[] = { - "ifcsite", "ifcbuilding", "ifcproject" - }; - - // tell the reader for which types we need to simulate STEPs reverse indices - static const char* const inverse_indices_to_track[] = { - "ifcrelcontainedinspatialstructure", "ifcrelaggregates", "ifcrelvoidselement", "ifcreldefinesbyproperties", "ifcpropertyset", "ifcstyleditem" - }; - - // feed the IFC schema into the reader and pre-parse all lines - STEP::ReadFile(*db, schema, types_to_track, inverse_indices_to_track); - const STEP::LazyObject* proj = db->GetObject("ifcproject"); - if (!proj) { - ThrowException("missing IfcProject entity"); - } - - ConversionData conv(*db,proj->To<IfcProject>(),pScene,settings); - SetUnits(conv); - SetCoordinateSpace(conv); - ProcessSpatialStructures(conv); - MakeTreeRelative(conv); - - // NOTE - this is a stress test for the importer, but it works only - // in a build with no entities disabled. See - // scripts/IFCImporter/CPPGenerator.py - // for more information. - #ifdef ASSIMP_IFC_TEST - db->EvaluateAll(); - #endif - - // do final data copying - if (conv.meshes.size()) { - pScene->mNumMeshes = static_cast<unsigned int>(conv.meshes.size()); - pScene->mMeshes = new aiMesh*[pScene->mNumMeshes](); - std::copy(conv.meshes.begin(),conv.meshes.end(),pScene->mMeshes); - - // needed to keep the d'tor from burning us - conv.meshes.clear(); - } - - if (conv.materials.size()) { - pScene->mNumMaterials = static_cast<unsigned int>(conv.materials.size()); - pScene->mMaterials = new aiMaterial*[pScene->mNumMaterials](); - std::copy(conv.materials.begin(),conv.materials.end(),pScene->mMaterials); - - // needed to keep the d'tor from burning us - conv.materials.clear(); - } - - // apply world coordinate system (which includes the scaling to convert to meters and a -90 degrees rotation around x) - aiMatrix4x4 scale, rot; - aiMatrix4x4::Scaling(static_cast<aiVector3D>(IfcVector3(conv.len_scale)),scale); - aiMatrix4x4::RotationX(-AI_MATH_HALF_PI_F,rot); - - pScene->mRootNode->mTransformation = rot * scale * conv.wcs * pScene->mRootNode->mTransformation; - - // this must be last because objects are evaluated lazily as we process them - if ( !DefaultLogger::isNullLogger() ){ - LogDebug((Formatter::format(),"STEP: evaluated ",db->GetEvaluatedObjectCount()," object records")); - } + } + + std::unique_ptr<STEP::DB> db(STEP::ReadFileHeader(stream)); + const STEP::HeaderInfo& head = static_cast<const STEP::DB&>(*db).GetHeader(); + + if(!head.fileSchema.size() || head.fileSchema.substr(0,3) != "IFC") { + ThrowException("Unrecognized file schema: " + head.fileSchema); + } + + if (!DefaultLogger::isNullLogger()) { + LogDebug("File schema is \'" + head.fileSchema + '\''); + if (head.timestamp.length()) { + LogDebug("Timestamp \'" + head.timestamp + '\''); + } + if (head.app.length()) { + LogDebug("Application/Exporter identline is \'" + head.app + '\''); + } + } + + // obtain a copy of the machine-generated IFC scheme + EXPRESS::ConversionSchema schema; + GetSchema(schema); + + // tell the reader which entity types to track with special care + static const char* const types_to_track[] = { + "ifcsite", "ifcbuilding", "ifcproject" + }; + + // tell the reader for which types we need to simulate STEPs reverse indices + static const char* const inverse_indices_to_track[] = { + "ifcrelcontainedinspatialstructure", "ifcrelaggregates", "ifcrelvoidselement", "ifcreldefinesbyproperties", "ifcpropertyset", "ifcstyleditem" + }; + + // feed the IFC schema into the reader and pre-parse all lines + STEP::ReadFile(*db, schema, types_to_track, inverse_indices_to_track); + const STEP::LazyObject* proj = db->GetObject("ifcproject"); + if (!proj) { + ThrowException("missing IfcProject entity"); + } + + ConversionData conv(*db,proj->To<IfcProject>(),pScene,settings); + SetUnits(conv); + SetCoordinateSpace(conv); + ProcessSpatialStructures(conv); + MakeTreeRelative(conv); + + // NOTE - this is a stress test for the importer, but it works only + // in a build with no entities disabled. See + // scripts/IFCImporter/CPPGenerator.py + // for more information. + #ifdef ASSIMP_IFC_TEST + db->EvaluateAll(); + #endif + + // do final data copying + if (conv.meshes.size()) { + pScene->mNumMeshes = static_cast<unsigned int>(conv.meshes.size()); + pScene->mMeshes = new aiMesh*[pScene->mNumMeshes](); + std::copy(conv.meshes.begin(),conv.meshes.end(),pScene->mMeshes); + + // needed to keep the d'tor from burning us + conv.meshes.clear(); + } + + if (conv.materials.size()) { + pScene->mNumMaterials = static_cast<unsigned int>(conv.materials.size()); + pScene->mMaterials = new aiMaterial*[pScene->mNumMaterials](); + std::copy(conv.materials.begin(),conv.materials.end(),pScene->mMaterials); + + // needed to keep the d'tor from burning us + conv.materials.clear(); + } + + // apply world coordinate system (which includes the scaling to convert to meters and a -90 degrees rotation around x) + aiMatrix4x4 scale, rot; + aiMatrix4x4::Scaling(static_cast<aiVector3D>(IfcVector3(conv.len_scale)),scale); + aiMatrix4x4::RotationX(-AI_MATH_HALF_PI_F,rot); + + pScene->mRootNode->mTransformation = rot * scale * conv.wcs * pScene->mRootNode->mTransformation; + + // this must be last because objects are evaluated lazily as we process them + if ( !DefaultLogger::isNullLogger() ){ + LogDebug((Formatter::format(),"STEP: evaluated ",db->GetEvaluatedObjectCount()," object records")); + } } namespace { @@ -321,637 +323,635 @@ namespace { // ------------------------------------------------------------------------------------------------ void ConvertUnit(const IfcNamedUnit& unit,ConversionData& conv) { - if(const IfcSIUnit* const si = unit.ToPtr<IfcSIUnit>()) { - - if(si->UnitType == "LENGTHUNIT") { - conv.len_scale = si->Prefix ? ConvertSIPrefix(si->Prefix) : 1.f; - IFCImporter::LogDebug("got units used for lengths"); - } - if(si->UnitType == "PLANEANGLEUNIT") { - if (si->Name != "RADIAN") { - IFCImporter::LogWarn("expected base unit for angles to be radian"); - } - } - } - else if(const IfcConversionBasedUnit* const convu = unit.ToPtr<IfcConversionBasedUnit>()) { - - if(convu->UnitType == "PLANEANGLEUNIT") { - try { - conv.angle_scale = convu->ConversionFactor->ValueComponent->To<EXPRESS::REAL>(); - ConvertUnit(*convu->ConversionFactor->UnitComponent,conv); - IFCImporter::LogDebug("got units used for angles"); - } - catch(std::bad_cast&) { - IFCImporter::LogError("skipping unknown IfcConversionBasedUnit.ValueComponent entry - expected REAL"); - } - } - } + if(const IfcSIUnit* const si = unit.ToPtr<IfcSIUnit>()) { + + if(si->UnitType == "LENGTHUNIT") { + conv.len_scale = si->Prefix ? ConvertSIPrefix(si->Prefix) : 1.f; + IFCImporter::LogDebug("got units used for lengths"); + } + if(si->UnitType == "PLANEANGLEUNIT") { + if (si->Name != "RADIAN") { + IFCImporter::LogWarn("expected base unit for angles to be radian"); + } + } + } + else if(const IfcConversionBasedUnit* const convu = unit.ToPtr<IfcConversionBasedUnit>()) { + + if(convu->UnitType == "PLANEANGLEUNIT") { + try { + conv.angle_scale = convu->ConversionFactor->ValueComponent->To<EXPRESS::REAL>(); + ConvertUnit(*convu->ConversionFactor->UnitComponent,conv); + IFCImporter::LogDebug("got units used for angles"); + } + catch(std::bad_cast&) { + IFCImporter::LogError("skipping unknown IfcConversionBasedUnit.ValueComponent entry - expected REAL"); + } + } + } } // ------------------------------------------------------------------------------------------------ void ConvertUnit(const EXPRESS::DataType& dt,ConversionData& conv) { - try { - const EXPRESS::ENTITY& e = dt.To<ENTITY>(); - - const IfcNamedUnit& unit = e.ResolveSelect<IfcNamedUnit>(conv.db); - if(unit.UnitType != "LENGTHUNIT" && unit.UnitType != "PLANEANGLEUNIT") { - return; - } - - ConvertUnit(unit,conv); - } - catch(std::bad_cast&) { - // not entity, somehow - IFCImporter::LogError("skipping unknown IfcUnit entry - expected entity"); - } + try { + const EXPRESS::ENTITY& e = dt.To<ENTITY>(); + + const IfcNamedUnit& unit = e.ResolveSelect<IfcNamedUnit>(conv.db); + if(unit.UnitType != "LENGTHUNIT" && unit.UnitType != "PLANEANGLEUNIT") { + return; + } + + ConvertUnit(unit,conv); + } + catch(std::bad_cast&) { + // not entity, somehow + IFCImporter::LogError("skipping unknown IfcUnit entry - expected entity"); + } } // ------------------------------------------------------------------------------------------------ void SetUnits(ConversionData& conv) { - // see if we can determine the coordinate space used to express. - for(size_t i = 0; i < conv.proj.UnitsInContext->Units.size(); ++i ) { - ConvertUnit(*conv.proj.UnitsInContext->Units[i],conv); - } + // see if we can determine the coordinate space used to express. + for(size_t i = 0; i < conv.proj.UnitsInContext->Units.size(); ++i ) { + ConvertUnit(*conv.proj.UnitsInContext->Units[i],conv); + } } // ------------------------------------------------------------------------------------------------ void SetCoordinateSpace(ConversionData& conv) { - const IfcRepresentationContext* fav = NULL; - BOOST_FOREACH(const IfcRepresentationContext& v, conv.proj.RepresentationContexts) { - fav = &v; - // Model should be the most suitable type of context, hence ignore the others - if (v.ContextType && v.ContextType.Get() == "Model") { - break; - } - } - if (fav) { - if(const IfcGeometricRepresentationContext* const geo = fav->ToPtr<IfcGeometricRepresentationContext>()) { - ConvertAxisPlacement(conv.wcs, *geo->WorldCoordinateSystem, conv); - IFCImporter::LogDebug("got world coordinate system"); - } - } + const IfcRepresentationContext* fav = NULL; + for(const IfcRepresentationContext& v : conv.proj.RepresentationContexts) { + fav = &v; + // Model should be the most suitable type of context, hence ignore the others + if (v.ContextType && v.ContextType.Get() == "Model") { + break; + } + } + if (fav) { + if(const IfcGeometricRepresentationContext* const geo = fav->ToPtr<IfcGeometricRepresentationContext>()) { + ConvertAxisPlacement(conv.wcs, *geo->WorldCoordinateSystem, conv); + IFCImporter::LogDebug("got world coordinate system"); + } + } } // ------------------------------------------------------------------------------------------------ void ResolveObjectPlacement(aiMatrix4x4& m, const IfcObjectPlacement& place, ConversionData& conv) { - if (const IfcLocalPlacement* const local = place.ToPtr<IfcLocalPlacement>()){ - IfcMatrix4 tmp; - ConvertAxisPlacement(tmp, *local->RelativePlacement, conv); - - m = static_cast<aiMatrix4x4>(tmp); - - if (local->PlacementRelTo) { - aiMatrix4x4 tmp; - ResolveObjectPlacement(tmp,local->PlacementRelTo.Get(),conv); - m = tmp * m; - } - } - else { - IFCImporter::LogWarn("skipping unknown IfcObjectPlacement entity, type is " + place.GetClassName()); - } -} - -// ------------------------------------------------------------------------------------------------ -void GetAbsTransform(aiMatrix4x4& out, const aiNode* nd, ConversionData& conv) -{ - aiMatrix4x4 t; - if (nd->mParent) { - GetAbsTransform(t,nd->mParent,conv); - } - out = t*nd->mTransformation; + if (const IfcLocalPlacement* const local = place.ToPtr<IfcLocalPlacement>()){ + IfcMatrix4 tmp; + ConvertAxisPlacement(tmp, *local->RelativePlacement, conv); + + m = static_cast<aiMatrix4x4>(tmp); + + if (local->PlacementRelTo) { + aiMatrix4x4 tmp; + ResolveObjectPlacement(tmp,local->PlacementRelTo.Get(),conv); + m = tmp * m; + } + } + else { + IFCImporter::LogWarn("skipping unknown IfcObjectPlacement entity, type is " + place.GetClassName()); + } } // ------------------------------------------------------------------------------------------------ -bool ProcessMappedItem(const IfcMappedItem& mapped, aiNode* nd_src, std::vector< aiNode* >& subnodes_src, ConversionData& conv) +bool ProcessMappedItem(const IfcMappedItem& mapped, aiNode* nd_src, std::vector< aiNode* >& subnodes_src, unsigned int matid, ConversionData& conv) { - // insert a custom node here, the cartesian transform operator is simply a conventional transformation matrix - std::auto_ptr<aiNode> nd(new aiNode()); - nd->mName.Set("IfcMappedItem"); - - // handle the Cartesian operator - IfcMatrix4 m; - ConvertTransformOperator(m, *mapped.MappingTarget); - - IfcMatrix4 msrc; - ConvertAxisPlacement(msrc,*mapped.MappingSource->MappingOrigin,conv); - - msrc = m*msrc; - - std::vector<unsigned int> meshes; - const size_t old_openings = conv.collect_openings ? conv.collect_openings->size() : 0; - if (conv.apply_openings) { - IfcMatrix4 minv = msrc; - minv.Inverse(); - BOOST_FOREACH(TempOpening& open,*conv.apply_openings){ - open.Transform(minv); - } - } - - const IfcRepresentation& repr = mapped.MappingSource->MappedRepresentation; - - bool got = false; - BOOST_FOREACH(const IfcRepresentationItem& item, repr.Items) { - if(!ProcessRepresentationItem(item,meshes,conv)) { - IFCImporter::LogWarn("skipping mapped entity of type " + item.GetClassName() + ", no representations could be generated"); - } - else got = true; - } - - if (!got) { - return false; - } - - AssignAddedMeshes(meshes,nd.get(),conv); - if (conv.collect_openings) { - - // if this pass serves us only to collect opening geometry, - // make sure we transform the TempMesh's which we need to - // preserve as well. - if(const size_t diff = conv.collect_openings->size() - old_openings) { - for(size_t i = 0; i < diff; ++i) { - (*conv.collect_openings)[old_openings+i].Transform(msrc); - } - } - } - - nd->mTransformation = nd_src->mTransformation * static_cast<aiMatrix4x4>( msrc ); - subnodes_src.push_back(nd.release()); - - return true; + // insert a custom node here, the cartesian transform operator is simply a conventional transformation matrix + std::unique_ptr<aiNode> nd(new aiNode()); + nd->mName.Set("IfcMappedItem"); + + // handle the Cartesian operator + IfcMatrix4 m; + ConvertTransformOperator(m, *mapped.MappingTarget); + + IfcMatrix4 msrc; + ConvertAxisPlacement(msrc,*mapped.MappingSource->MappingOrigin,conv); + + msrc = m*msrc; + + std::vector<unsigned int> meshes; + const size_t old_openings = conv.collect_openings ? conv.collect_openings->size() : 0; + if (conv.apply_openings) { + IfcMatrix4 minv = msrc; + minv.Inverse(); + for(TempOpening& open :*conv.apply_openings){ + open.Transform(minv); + } + } + + unsigned int localmatid = ProcessMaterials(mapped.GetID(),matid,conv,false); + const IfcRepresentation& repr = mapped.MappingSource->MappedRepresentation; + + bool got = false; + for(const IfcRepresentationItem& item : repr.Items) { + if(!ProcessRepresentationItem(item,localmatid,meshes,conv)) { + IFCImporter::LogWarn("skipping mapped entity of type " + item.GetClassName() + ", no representations could be generated"); + } + else got = true; + } + + if (!got) { + return false; + } + + AssignAddedMeshes(meshes,nd.get(),conv); + if (conv.collect_openings) { + + // if this pass serves us only to collect opening geometry, + // make sure we transform the TempMesh's which we need to + // preserve as well. + if(const size_t diff = conv.collect_openings->size() - old_openings) { + for(size_t i = 0; i < diff; ++i) { + (*conv.collect_openings)[old_openings+i].Transform(msrc); + } + } + } + + nd->mTransformation = nd_src->mTransformation * static_cast<aiMatrix4x4>( msrc ); + subnodes_src.push_back(nd.release()); + + return true; } // ------------------------------------------------------------------------------------------------ struct RateRepresentationPredicate { - int Rate(const IfcRepresentation* r) const { - // the smaller, the better - - if (! r->RepresentationIdentifier) { - // neutral choice if no extra information is specified - return 0; - } - - - const std::string& name = r->RepresentationIdentifier.Get(); - if (name == "MappedRepresentation") { - if (!r->Items.empty()) { - // take the first item and base our choice on it - const IfcMappedItem* const m = r->Items.front()->ToPtr<IfcMappedItem>(); - if (m) { - return Rate(m->MappingSource->MappedRepresentation); - } - } - return 100; - } - - return Rate(name); - } - - int Rate(const std::string& r) const { - - - if (r == "SolidModel") { - return -3; - } - - // give strong preference to extruded geometry. - if (r == "SweptSolid") { - return -10; - } - - if (r == "Clipping") { - return -5; - } - - // 'Brep' is difficult to get right due to possible voids in the - // polygon boundaries, so take it only if we are forced to (i.e. - // if the only alternative is (non-clipping) boolean operations, - // which are not supported at all). - if (r == "Brep") { - return -2; - } - - // Curves, bounding boxes - those will most likely not be loaded - // as we can't make any use out of this data. So consider them - // last. - if (r == "BoundingBox" || r == "Curve2D") { - return 100; - } - return 0; - } - - bool operator() (const IfcRepresentation* a, const IfcRepresentation* b) const { - return Rate(a) < Rate(b); - } + int Rate(const IfcRepresentation* r) const { + // the smaller, the better + + if (! r->RepresentationIdentifier) { + // neutral choice if no extra information is specified + return 0; + } + + + const std::string& name = r->RepresentationIdentifier.Get(); + if (name == "MappedRepresentation") { + if (!r->Items.empty()) { + // take the first item and base our choice on it + const IfcMappedItem* const m = r->Items.front()->ToPtr<IfcMappedItem>(); + if (m) { + return Rate(m->MappingSource->MappedRepresentation); + } + } + return 100; + } + + return Rate(name); + } + + int Rate(const std::string& r) const { + + + if (r == "SolidModel") { + return -3; + } + + // give strong preference to extruded geometry. + if (r == "SweptSolid") { + return -10; + } + + if (r == "Clipping") { + return -5; + } + + // 'Brep' is difficult to get right due to possible voids in the + // polygon boundaries, so take it only if we are forced to (i.e. + // if the only alternative is (non-clipping) boolean operations, + // which are not supported at all). + if (r == "Brep") { + return -2; + } + + // Curves, bounding boxes - those will most likely not be loaded + // as we can't make any use out of this data. So consider them + // last. + if (r == "BoundingBox" || r == "Curve2D") { + return 100; + } + return 0; + } + + bool operator() (const IfcRepresentation* a, const IfcRepresentation* b) const { + return Rate(a) < Rate(b); + } }; // ------------------------------------------------------------------------------------------------ void ProcessProductRepresentation(const IfcProduct& el, aiNode* nd, std::vector< aiNode* >& subnodes, ConversionData& conv) { - if(!el.Representation) { - return; - } - std::vector<unsigned int> meshes; - // we want only one representation type, so bring them in a suitable order (i.e try those - // that look as if we could read them quickly at first). This way of reading - // representation is relatively generic and allows the concrete implementations - // for the different representation types to make some sensible choices what - // to load and what not to load. - const STEP::ListOf< STEP::Lazy< IfcRepresentation >, 1, 0 >& src = el.Representation.Get()->Representations; - std::vector<const IfcRepresentation*> repr_ordered(src.size()); - std::copy(src.begin(),src.end(),repr_ordered.begin()); - std::sort(repr_ordered.begin(),repr_ordered.end(),RateRepresentationPredicate()); - BOOST_FOREACH(const IfcRepresentation* repr, repr_ordered) { - bool res = false; - BOOST_FOREACH(const IfcRepresentationItem& item, repr->Items) { - if(const IfcMappedItem* const geo = item.ToPtr<IfcMappedItem>()) { - res = ProcessMappedItem(*geo,nd,subnodes,conv) || res; - } - else { - res = ProcessRepresentationItem(item,meshes,conv) || res; - } - } - // if we got something meaningful at this point, skip any further representations - if(res) { - break; - } - } - AssignAddedMeshes(meshes,nd,conv); + if(!el.Representation) { + return; + } + + // extract Color from metadata, if present + unsigned int matid = ProcessMaterials( el.GetID(), std::numeric_limits<uint32_t>::max(), conv, false); + std::vector<unsigned int> meshes; + + // we want only one representation type, so bring them in a suitable order (i.e try those + // that look as if we could read them quickly at first). This way of reading + // representation is relatively generic and allows the concrete implementations + // for the different representation types to make some sensible choices what + // to load and what not to load. + const STEP::ListOf< STEP::Lazy< IfcRepresentation >, 1, 0 >& src = el.Representation.Get()->Representations; + std::vector<const IfcRepresentation*> repr_ordered(src.size()); + std::copy(src.begin(),src.end(),repr_ordered.begin()); + std::sort(repr_ordered.begin(),repr_ordered.end(),RateRepresentationPredicate()); + for(const IfcRepresentation* repr : repr_ordered) { + bool res = false; + for(const IfcRepresentationItem& item : repr->Items) { + if(const IfcMappedItem* const geo = item.ToPtr<IfcMappedItem>()) { + res = ProcessMappedItem(*geo,nd,subnodes,matid,conv) || res; + } + else { + res = ProcessRepresentationItem(item,matid,meshes,conv) || res; + } + } + // if we got something meaningful at this point, skip any further representations + if(res) { + break; + } + } + AssignAddedMeshes(meshes,nd,conv); } typedef std::map<std::string, std::string> Metadata; // ------------------------------------------------------------------------------------------------ -void ProcessMetadata(const ListOf< Lazy< IfcProperty >, 1, 0 >& set, ConversionData& conv, Metadata& properties, - const std::string& prefix = "", - unsigned int nest = 0) +void ProcessMetadata(const ListOf< Lazy< IfcProperty >, 1, 0 >& set, ConversionData& conv, Metadata& properties, + const std::string& prefix = "", + unsigned int nest = 0) { - BOOST_FOREACH(const IfcProperty& property, set) { - const std::string& key = prefix.length() > 0 ? (prefix + "." + property.Name) : property.Name; - if (const IfcPropertySingleValue* const singleValue = property.ToPtr<IfcPropertySingleValue>()) { - if (singleValue->NominalValue) { - if (const EXPRESS::STRING* str = singleValue->NominalValue.Get()->ToPtr<EXPRESS::STRING>()) { - std::string value = static_cast<std::string>(*str); - properties[key]=value; - } - else if (const EXPRESS::REAL* val = singleValue->NominalValue.Get()->ToPtr<EXPRESS::REAL>()) { - float value = static_cast<float>(*val); - std::stringstream s; - s << value; - properties[key]=s.str(); - } - else if (const EXPRESS::INTEGER* val = singleValue->NominalValue.Get()->ToPtr<EXPRESS::INTEGER>()) { - int64_t value = static_cast<int64_t>(*val); - std::stringstream s; - s << value; - properties[key]=s.str(); - } - } - } - else if (const IfcPropertyListValue* const listValue = property.ToPtr<IfcPropertyListValue>()) { - std::stringstream ss; - ss << "["; - unsigned index=0; - BOOST_FOREACH(const IfcValue::Out& v, listValue->ListValues) { - if (!v) continue; - if (const EXPRESS::STRING* str = v->ToPtr<EXPRESS::STRING>()) { - std::string value = static_cast<std::string>(*str); - ss << "'" << value << "'"; - } - else if (const EXPRESS::REAL* val = v->ToPtr<EXPRESS::REAL>()) { - float value = static_cast<float>(*val); - ss << value; - } - else if (const EXPRESS::INTEGER* val = v->ToPtr<EXPRESS::INTEGER>()) { - int64_t value = static_cast<int64_t>(*val); - ss << value; - } - if (index+1<listValue->ListValues.size()) { - ss << ","; - } - index++; - } - ss << "]"; - properties[key]=ss.str(); - } - else if (const IfcComplexProperty* const complexProp = property.ToPtr<IfcComplexProperty>()) { - if(nest > 2) { // mostly arbitrary limit to prevent stack overflow vulnerabilities - IFCImporter::LogError("maximum nesting level for IfcComplexProperty reached, skipping this property."); - } - else { - ProcessMetadata(complexProp->HasProperties, conv, properties, key, nest + 1); - } - } - else { - properties[key]=""; - } - } + for(const IfcProperty& property : set) { + const std::string& key = prefix.length() > 0 ? (prefix + "." + property.Name) : property.Name; + if (const IfcPropertySingleValue* const singleValue = property.ToPtr<IfcPropertySingleValue>()) { + if (singleValue->NominalValue) { + if (const EXPRESS::STRING* str = singleValue->NominalValue.Get()->ToPtr<EXPRESS::STRING>()) { + std::string value = static_cast<std::string>(*str); + properties[key]=value; + } + else if (const EXPRESS::REAL* val = singleValue->NominalValue.Get()->ToPtr<EXPRESS::REAL>()) { + float value = static_cast<float>(*val); + std::stringstream s; + s << value; + properties[key]=s.str(); + } + else if (const EXPRESS::INTEGER* val = singleValue->NominalValue.Get()->ToPtr<EXPRESS::INTEGER>()) { + int64_t value = static_cast<int64_t>(*val); + std::stringstream s; + s << value; + properties[key]=s.str(); + } + } + } + else if (const IfcPropertyListValue* const listValue = property.ToPtr<IfcPropertyListValue>()) { + std::stringstream ss; + ss << "["; + unsigned index=0; + for(const IfcValue::Out& v : listValue->ListValues) { + if (!v) continue; + if (const EXPRESS::STRING* str = v->ToPtr<EXPRESS::STRING>()) { + std::string value = static_cast<std::string>(*str); + ss << "'" << value << "'"; + } + else if (const EXPRESS::REAL* val = v->ToPtr<EXPRESS::REAL>()) { + float value = static_cast<float>(*val); + ss << value; + } + else if (const EXPRESS::INTEGER* val = v->ToPtr<EXPRESS::INTEGER>()) { + int64_t value = static_cast<int64_t>(*val); + ss << value; + } + if (index+1<listValue->ListValues.size()) { + ss << ","; + } + index++; + } + ss << "]"; + properties[key]=ss.str(); + } + else if (const IfcComplexProperty* const complexProp = property.ToPtr<IfcComplexProperty>()) { + if(nest > 2) { // mostly arbitrary limit to prevent stack overflow vulnerabilities + IFCImporter::LogError("maximum nesting level for IfcComplexProperty reached, skipping this property."); + } + else { + ProcessMetadata(complexProp->HasProperties, conv, properties, key, nest + 1); + } + } + else { + properties[key]=""; + } + } } // ------------------------------------------------------------------------------------------------ -void ProcessMetadata(uint64_t relDefinesByPropertiesID, ConversionData& conv, Metadata& properties) +void ProcessMetadata(uint64_t relDefinesByPropertiesID, ConversionData& conv, Metadata& properties) { - if (const IfcRelDefinesByProperties* const pset = conv.db.GetObject(relDefinesByPropertiesID)->ToPtr<IfcRelDefinesByProperties>()) { - if (const IfcPropertySet* const set = conv.db.GetObject(pset->RelatingPropertyDefinition->GetID())->ToPtr<IfcPropertySet>()) { - ProcessMetadata(set->HasProperties, conv, properties); - } - } + if (const IfcRelDefinesByProperties* const pset = conv.db.GetObject(relDefinesByPropertiesID)->ToPtr<IfcRelDefinesByProperties>()) { + if (const IfcPropertySet* const set = conv.db.GetObject(pset->RelatingPropertyDefinition->GetID())->ToPtr<IfcPropertySet>()) { + ProcessMetadata(set->HasProperties, conv, properties); + } + } } // ------------------------------------------------------------------------------------------------ aiNode* ProcessSpatialStructure(aiNode* parent, const IfcProduct& el, ConversionData& conv, std::vector<TempOpening>* collect_openings = NULL) { - const STEP::DB::RefMap& refs = conv.db.GetRefs(); - - // skip over space and annotation nodes - usually, these have no meaning in Assimp's context - if(conv.settings.skipSpaceRepresentations) { - if(const IfcSpace* const space = el.ToPtr<IfcSpace>()) { - IFCImporter::LogDebug("skipping IfcSpace entity due to importer settings"); - return NULL; - } - } - - if(conv.settings.skipAnnotations) { - if(const IfcAnnotation* const ann = el.ToPtr<IfcAnnotation>()) { - IFCImporter::LogDebug("skipping IfcAnnotation entity due to importer settings"); - return NULL; - } - } - - // add an output node for this spatial structure - std::auto_ptr<aiNode> nd(new aiNode()); - nd->mName.Set(el.GetClassName()+"_"+(el.Name?el.Name.Get():"Unnamed")+"_"+el.GlobalId); - nd->mParent = parent; - - conv.already_processed.insert(el.GetID()); - - // check for node metadata - STEP::DB::RefMapRange children = refs.equal_range(el.GetID()); - if (children.first!=refs.end()) { - Metadata properties; - if (children.first==children.second) { - // handles single property set - ProcessMetadata((*children.first).second, conv, properties); - } - else { - // handles multiple property sets (currently all property sets are merged, - // which may not be the best solution in the long run) - for (STEP::DB::RefMap::const_iterator it=children.first; it!=children.second; ++it) { - ProcessMetadata((*it).second, conv, properties); - } - } - - if (!properties.empty()) { - aiMetadata* data = new aiMetadata(); - data->mNumProperties = properties.size(); - data->mKeys = new aiString[data->mNumProperties](); - data->mValues = new aiMetadataEntry[data->mNumProperties](); - - unsigned int index = 0; - BOOST_FOREACH(const Metadata::value_type& kv, properties) - data->Set(index++, kv.first, aiString(kv.second)); - - nd->mMetaData = data; - } - } - - if(el.ObjectPlacement) { - ResolveObjectPlacement(nd->mTransformation,el.ObjectPlacement.Get(),conv); - } - - std::vector<TempOpening> openings; - - IfcMatrix4 myInv; - bool didinv = false; - - // convert everything contained directly within this structure, - // this may result in more nodes. - std::vector< aiNode* > subnodes; - try { - // locate aggregates and 'contained-in-here'-elements of this spatial structure and add them in recursively - // on our way, collect openings in *this* element - STEP::DB::RefMapRange range = refs.equal_range(el.GetID()); - - for(STEP::DB::RefMapRange range2 = range; range2.first != range.second; ++range2.first) { - // skip over meshes that have already been processed before. This is strictly necessary - // because the reverse indices also include references contained in argument lists and - // therefore every element has a back-reference hold by its parent. - if (conv.already_processed.find((*range2.first).second) != conv.already_processed.end()) { - continue; - } - const STEP::LazyObject& obj = conv.db.MustGetObject((*range2.first).second); - - // handle regularly-contained elements - if(const IfcRelContainedInSpatialStructure* const cont = obj->ToPtr<IfcRelContainedInSpatialStructure>()) { - if(cont->RelatingStructure->GetID() != el.GetID()) { - continue; - } - BOOST_FOREACH(const IfcProduct& pro, cont->RelatedElements) { - if(const IfcOpeningElement* const open = pro.ToPtr<IfcOpeningElement>()) { - // IfcOpeningElement is handled below. Sadly we can't use it here as is: - // The docs say that opening elements are USUALLY attached to building storey, - // but we want them for the building elements to which they belong. - continue; - } - - aiNode* const ndnew = ProcessSpatialStructure(nd.get(),pro,conv,NULL); - if(ndnew) { - subnodes.push_back( ndnew ); - } - } - } - // handle openings, which we collect in a list rather than adding them to the node graph - else if(const IfcRelVoidsElement* const fills = obj->ToPtr<IfcRelVoidsElement>()) { - if(fills->RelatingBuildingElement->GetID() == el.GetID()) { - const IfcFeatureElementSubtraction& open = fills->RelatedOpeningElement; - - // move opening elements to a separate node since they are semantically different than elements that are just 'contained' - std::auto_ptr<aiNode> nd_aggr(new aiNode()); - nd_aggr->mName.Set("$RelVoidsElement"); - nd_aggr->mParent = nd.get(); - - nd_aggr->mTransformation = nd->mTransformation; - - std::vector<TempOpening> openings_local; - aiNode* const ndnew = ProcessSpatialStructure( nd_aggr.get(),open, conv,&openings_local); - if (ndnew) { - - nd_aggr->mNumChildren = 1; - nd_aggr->mChildren = new aiNode*[1](); - - - nd_aggr->mChildren[0] = ndnew; - - if(openings_local.size()) { - if (!didinv) { - myInv = aiMatrix4x4(nd->mTransformation ).Inverse(); - didinv = true; - } - - // we need all openings to be in the local space of *this* node, so transform them - BOOST_FOREACH(TempOpening& op,openings_local) { - op.Transform( myInv*nd_aggr->mChildren[0]->mTransformation); - openings.push_back(op); - } - } - subnodes.push_back( nd_aggr.release() ); - } - } - } - } - - for(;range.first != range.second; ++range.first) { - // see note in loop above - if (conv.already_processed.find((*range.first).second) != conv.already_processed.end()) { - continue; - } - if(const IfcRelAggregates* const aggr = conv.db.GetObject((*range.first).second)->ToPtr<IfcRelAggregates>()) { - if(aggr->RelatingObject->GetID() != el.GetID()) { - continue; - } - - // move aggregate elements to a separate node since they are semantically different than elements that are just 'contained' - std::auto_ptr<aiNode> nd_aggr(new aiNode()); - nd_aggr->mName.Set("$RelAggregates"); - nd_aggr->mParent = nd.get(); - - nd_aggr->mTransformation = nd->mTransformation; - - nd_aggr->mChildren = new aiNode*[aggr->RelatedObjects.size()](); - BOOST_FOREACH(const IfcObjectDefinition& def, aggr->RelatedObjects) { - if(const IfcProduct* const prod = def.ToPtr<IfcProduct>()) { - - aiNode* const ndnew = ProcessSpatialStructure(nd_aggr.get(),*prod,conv,NULL); - if(ndnew) { - nd_aggr->mChildren[nd_aggr->mNumChildren++] = ndnew; - } - } - } - - subnodes.push_back( nd_aggr.release() ); - } - } - - conv.collect_openings = collect_openings; - if(!conv.collect_openings) { - conv.apply_openings = &openings; - } - - ProcessProductRepresentation(el,nd.get(),subnodes,conv); - conv.apply_openings = conv.collect_openings = NULL; - - if (subnodes.size()) { - nd->mChildren = new aiNode*[subnodes.size()](); - BOOST_FOREACH(aiNode* nd2, subnodes) { - nd->mChildren[nd->mNumChildren++] = nd2; - nd2->mParent = nd.get(); - } - } - } - catch(...) { - // it hurts, but I don't want to pull boost::ptr_vector into -noboost only for these few spots here - std::for_each(subnodes.begin(),subnodes.end(),delete_fun<aiNode>()); - throw; - } - - ai_assert(conv.already_processed.find(el.GetID()) != conv.already_processed.end()); - conv.already_processed.erase(conv.already_processed.find(el.GetID())); - return nd.release(); + const STEP::DB::RefMap& refs = conv.db.GetRefs(); + + // skip over space and annotation nodes - usually, these have no meaning in Assimp's context + bool skipGeometry = false; + if(conv.settings.skipSpaceRepresentations) { + if(el.ToPtr<IfcSpace>()) { + IFCImporter::LogDebug("skipping IfcSpace entity due to importer settings"); + skipGeometry = true; + } + } + + if(conv.settings.skipAnnotations) { + if(el.ToPtr<IfcAnnotation>()) { + IFCImporter::LogDebug("skipping IfcAnnotation entity due to importer settings"); + return NULL; + } + } + + // add an output node for this spatial structure + std::unique_ptr<aiNode> nd(new aiNode()); + nd->mName.Set(el.GetClassName()+"_"+(el.Name?el.Name.Get():"Unnamed")+"_"+el.GlobalId); + nd->mParent = parent; + + conv.already_processed.insert(el.GetID()); + + // check for node metadata + STEP::DB::RefMapRange children = refs.equal_range(el.GetID()); + if (children.first!=refs.end()) { + Metadata properties; + if (children.first==children.second) { + // handles single property set + ProcessMetadata((*children.first).second, conv, properties); + } + else { + // handles multiple property sets (currently all property sets are merged, + // which may not be the best solution in the long run) + for (STEP::DB::RefMap::const_iterator it=children.first; it!=children.second; ++it) { + ProcessMetadata((*it).second, conv, properties); + } + } + + if (!properties.empty()) { + aiMetadata* data = new aiMetadata(); + data->mNumProperties = properties.size(); + data->mKeys = new aiString[data->mNumProperties](); + data->mValues = new aiMetadataEntry[data->mNumProperties](); + + unsigned int index = 0; + for(const Metadata::value_type& kv : properties) + data->Set(index++, kv.first, aiString(kv.second)); + + nd->mMetaData = data; + } + } + + if(el.ObjectPlacement) { + ResolveObjectPlacement(nd->mTransformation,el.ObjectPlacement.Get(),conv); + } + + std::vector<TempOpening> openings; + + IfcMatrix4 myInv; + bool didinv = false; + + // convert everything contained directly within this structure, + // this may result in more nodes. + std::vector< aiNode* > subnodes; + try { + // locate aggregates and 'contained-in-here'-elements of this spatial structure and add them in recursively + // on our way, collect openings in *this* element + STEP::DB::RefMapRange range = refs.equal_range(el.GetID()); + + for(STEP::DB::RefMapRange range2 = range; range2.first != range.second; ++range2.first) { + // skip over meshes that have already been processed before. This is strictly necessary + // because the reverse indices also include references contained in argument lists and + // therefore every element has a back-reference hold by its parent. + if (conv.already_processed.find((*range2.first).second) != conv.already_processed.end()) { + continue; + } + const STEP::LazyObject& obj = conv.db.MustGetObject((*range2.first).second); + + // handle regularly-contained elements + if(const IfcRelContainedInSpatialStructure* const cont = obj->ToPtr<IfcRelContainedInSpatialStructure>()) { + if(cont->RelatingStructure->GetID() != el.GetID()) { + continue; + } + for(const IfcProduct& pro : cont->RelatedElements) { + if(pro.ToPtr<IfcOpeningElement>()) { + // IfcOpeningElement is handled below. Sadly we can't use it here as is: + // The docs say that opening elements are USUALLY attached to building storey, + // but we want them for the building elements to which they belong. + continue; + } + + aiNode* const ndnew = ProcessSpatialStructure(nd.get(),pro,conv,NULL); + if(ndnew) { + subnodes.push_back( ndnew ); + } + } + } + // handle openings, which we collect in a list rather than adding them to the node graph + else if(const IfcRelVoidsElement* const fills = obj->ToPtr<IfcRelVoidsElement>()) { + if(fills->RelatingBuildingElement->GetID() == el.GetID()) { + const IfcFeatureElementSubtraction& open = fills->RelatedOpeningElement; + + // move opening elements to a separate node since they are semantically different than elements that are just 'contained' + std::unique_ptr<aiNode> nd_aggr(new aiNode()); + nd_aggr->mName.Set("$RelVoidsElement"); + nd_aggr->mParent = nd.get(); + + nd_aggr->mTransformation = nd->mTransformation; + + std::vector<TempOpening> openings_local; + aiNode* const ndnew = ProcessSpatialStructure( nd_aggr.get(),open, conv,&openings_local); + if (ndnew) { + + nd_aggr->mNumChildren = 1; + nd_aggr->mChildren = new aiNode*[1](); + + + nd_aggr->mChildren[0] = ndnew; + + if(openings_local.size()) { + if (!didinv) { + myInv = aiMatrix4x4(nd->mTransformation ).Inverse(); + didinv = true; + } + + // we need all openings to be in the local space of *this* node, so transform them + for(TempOpening& op :openings_local) { + op.Transform( myInv*nd_aggr->mChildren[0]->mTransformation); + openings.push_back(op); + } + } + subnodes.push_back( nd_aggr.release() ); + } + } + } + } + + for(;range.first != range.second; ++range.first) { + // see note in loop above + if (conv.already_processed.find((*range.first).second) != conv.already_processed.end()) { + continue; + } + if(const IfcRelAggregates* const aggr = conv.db.GetObject((*range.first).second)->ToPtr<IfcRelAggregates>()) { + if(aggr->RelatingObject->GetID() != el.GetID()) { + continue; + } + + // move aggregate elements to a separate node since they are semantically different than elements that are just 'contained' + std::unique_ptr<aiNode> nd_aggr(new aiNode()); + nd_aggr->mName.Set("$RelAggregates"); + nd_aggr->mParent = nd.get(); + + nd_aggr->mTransformation = nd->mTransformation; + + nd_aggr->mChildren = new aiNode*[aggr->RelatedObjects.size()](); + for(const IfcObjectDefinition& def : aggr->RelatedObjects) { + if(const IfcProduct* const prod = def.ToPtr<IfcProduct>()) { + + aiNode* const ndnew = ProcessSpatialStructure(nd_aggr.get(),*prod,conv,NULL); + if(ndnew) { + nd_aggr->mChildren[nd_aggr->mNumChildren++] = ndnew; + } + } + } + + subnodes.push_back( nd_aggr.release() ); + } + } + + conv.collect_openings = collect_openings; + if(!conv.collect_openings) { + conv.apply_openings = &openings; + } + + if (!skipGeometry) { + ProcessProductRepresentation(el,nd.get(),subnodes,conv); + conv.apply_openings = conv.collect_openings = NULL; + } + + if (subnodes.size()) { + nd->mChildren = new aiNode*[subnodes.size()](); + for(aiNode* nd2 : subnodes) { + nd->mChildren[nd->mNumChildren++] = nd2; + nd2->mParent = nd.get(); + } + } + } + catch(...) { + // it hurts, but I don't want to pull boost::ptr_vector into -noboost only for these few spots here + std::for_each(subnodes.begin(),subnodes.end(),delete_fun<aiNode>()); + throw; + } + + ai_assert(conv.already_processed.find(el.GetID()) != conv.already_processed.end()); + conv.already_processed.erase(conv.already_processed.find(el.GetID())); + return nd.release(); } // ------------------------------------------------------------------------------------------------ void ProcessSpatialStructures(ConversionData& conv) { - // XXX add support for multiple sites (i.e. IfcSpatialStructureElements with composition == COMPLEX) - - - // process all products in the file. it is reasonable to assume that a - // file that is relevant for us contains at least a site or a building. - const STEP::DB::ObjectMapByType& map = conv.db.GetObjectsByType(); - - ai_assert(map.find("ifcsite") != map.end()); - const STEP::DB::ObjectSet* range = &map.find("ifcsite")->second; - - if (range->empty()) { - ai_assert(map.find("ifcbuilding") != map.end()); - range = &map.find("ifcbuilding")->second; - if (range->empty()) { - // no site, no building - fail; - IFCImporter::ThrowException("no root element found (expected IfcBuilding or preferably IfcSite)"); - } - } - - - BOOST_FOREACH(const STEP::LazyObject* lz, *range) { - const IfcSpatialStructureElement* const prod = lz->ToPtr<IfcSpatialStructureElement>(); - if(!prod) { - continue; - } - IFCImporter::LogDebug("looking at spatial structure `" + (prod->Name ? prod->Name.Get() : "unnamed") + "`" + (prod->ObjectType? " which is of type " + prod->ObjectType.Get():"")); - - // the primary site is referenced by an IFCRELAGGREGATES element which assigns it to the IFCPRODUCT - const STEP::DB::RefMap& refs = conv.db.GetRefs(); - STEP::DB::RefMapRange range = refs.equal_range(conv.proj.GetID()); - for(;range.first != range.second; ++range.first) { - if(const IfcRelAggregates* const aggr = conv.db.GetObject((*range.first).second)->ToPtr<IfcRelAggregates>()) { - - BOOST_FOREACH(const IfcObjectDefinition& def, aggr->RelatedObjects) { - // comparing pointer values is not sufficient, we would need to cast them to the same type first - // as there is multiple inheritance in the game. - if (def.GetID() == prod->GetID()) { - IFCImporter::LogDebug("selecting this spatial structure as root structure"); - // got it, this is the primary site. - conv.out->mRootNode = ProcessSpatialStructure(NULL,*prod,conv,NULL); - return; - } - } - - } - } - } - - - IFCImporter::LogWarn("failed to determine primary site element, taking the first IfcSite"); - BOOST_FOREACH(const STEP::LazyObject* lz, *range) { - const IfcSpatialStructureElement* const prod = lz->ToPtr<IfcSpatialStructureElement>(); - if(!prod) { - continue; - } - - conv.out->mRootNode = ProcessSpatialStructure(NULL,*prod,conv,NULL); - return; - } - - IFCImporter::ThrowException("failed to determine primary site element"); + // XXX add support for multiple sites (i.e. IfcSpatialStructureElements with composition == COMPLEX) + + + // process all products in the file. it is reasonable to assume that a + // file that is relevant for us contains at least a site or a building. + const STEP::DB::ObjectMapByType& map = conv.db.GetObjectsByType(); + + ai_assert(map.find("ifcsite") != map.end()); + const STEP::DB::ObjectSet* range = &map.find("ifcsite")->second; + + if (range->empty()) { + ai_assert(map.find("ifcbuilding") != map.end()); + range = &map.find("ifcbuilding")->second; + if (range->empty()) { + // no site, no building - fail; + IFCImporter::ThrowException("no root element found (expected IfcBuilding or preferably IfcSite)"); + } + } + + + for(const STEP::LazyObject* lz : *range) { + const IfcSpatialStructureElement* const prod = lz->ToPtr<IfcSpatialStructureElement>(); + if(!prod) { + continue; + } + IFCImporter::LogDebug("looking at spatial structure `" + (prod->Name ? prod->Name.Get() : "unnamed") + "`" + (prod->ObjectType? " which is of type " + prod->ObjectType.Get():"")); + + // the primary site is referenced by an IFCRELAGGREGATES element which assigns it to the IFCPRODUCT + const STEP::DB::RefMap& refs = conv.db.GetRefs(); + STEP::DB::RefMapRange range = refs.equal_range(conv.proj.GetID()); + for(;range.first != range.second; ++range.first) { + if(const IfcRelAggregates* const aggr = conv.db.GetObject((*range.first).second)->ToPtr<IfcRelAggregates>()) { + + for(const IfcObjectDefinition& def : aggr->RelatedObjects) { + // comparing pointer values is not sufficient, we would need to cast them to the same type first + // as there is multiple inheritance in the game. + if (def.GetID() == prod->GetID()) { + IFCImporter::LogDebug("selecting this spatial structure as root structure"); + // got it, this is the primary site. + conv.out->mRootNode = ProcessSpatialStructure(NULL,*prod,conv,NULL); + return; + } + } + + } + } + } + + + IFCImporter::LogWarn("failed to determine primary site element, taking the first IfcSite"); + for(const STEP::LazyObject* lz : *range) { + const IfcSpatialStructureElement* const prod = lz->ToPtr<IfcSpatialStructureElement>(); + if(!prod) { + continue; + } + + conv.out->mRootNode = ProcessSpatialStructure(NULL,*prod,conv,NULL); + return; + } + + IFCImporter::ThrowException("failed to determine primary site element"); } // ------------------------------------------------------------------------------------------------ void MakeTreeRelative(aiNode* start, const aiMatrix4x4& combined) { - // combined is the parent's absolute transformation matrix - const aiMatrix4x4 old = start->mTransformation; + // combined is the parent's absolute transformation matrix + const aiMatrix4x4 old = start->mTransformation; - if (!combined.IsIdentity()) { - start->mTransformation = aiMatrix4x4(combined).Inverse() * start->mTransformation; - } + if (!combined.IsIdentity()) { + start->mTransformation = aiMatrix4x4(combined).Inverse() * start->mTransformation; + } - // All nodes store absolute transformations right now, so we need to make them relative - for (unsigned int i = 0; i < start->mNumChildren; ++i) { - MakeTreeRelative(start->mChildren[i],old); - } + // All nodes store absolute transformations right now, so we need to make them relative + for (unsigned int i = 0; i < start->mNumChildren; ++i) { + MakeTreeRelative(start->mChildren[i],old); + } } // ------------------------------------------------------------------------------------------------ void MakeTreeRelative(ConversionData& conv) { - MakeTreeRelative(conv.out->mRootNode,IfcMatrix4()); + MakeTreeRelative(conv.out->mRootNode,IfcMatrix4()); } } // !anon |