diff options
| -rwxr-xr-x | configure | 775 |
1 files changed, 371 insertions, 404 deletions
@@ -2433,11 +2433,378 @@ done [ "x$ERROR" = "xyes" ] && exit 1 #------------------------------------------------------------------------------- -# build tree initialization +# help - interactive parts of the script _after_ this section please #------------------------------------------------------------------------------- -### skip this if the user just needs help... -if [ "$OPT_HELP" != "yes" ]; then +if [ "$OPT_HELP" = "yes" ]; then + cat <<EOF +Usage: $relconf [options] + +Installation options: + + These are optional, but you may specify install directories. + + -prefix <dir> ...... This will install everything relative to <dir> + (default /usr/local/Qt-${QT_VERSION}, \$PWD if -developer-build is active) + + -extprefix <dir> ... When -sysroot is used, install everything to <dir>, + rather than into SYSROOT/PREFIX. + + -hostprefix [dir] .. Tools and libraries needed when developing + applications are installed in [dir]. If [dir] is + not given, the current build directory will be used. + (default EXTPREFIX) + + You may use these to separate different parts of the install: + + -bindir <dir> ......... User executables will be installed to <dir> + (default PREFIX/bin) + -headerdir <dir> ...... Headers will be installed to <dir> + (default PREFIX/include) + -libdir <dir> ......... Libraries will be installed to <dir> + (default PREFIX/lib) + -archdatadir <dir> .... Arch-dependent data used by Qt will be installed to <dir> + (default PREFIX) + -plugindir <dir> ...... Plugins will be installed to <dir> + (default ARCHDATADIR/plugins) + -libexecdir <dir> ..... Program executables will be installed to <dir> + (default ARCHDATADIR/libexec, ARCHDATADIR/bin for MinGW) + -importdir <dir> ...... Imports for QML1 will be installed to <dir> + (default ARCHDATADIR/imports) + -qmldir <dir> ......... Imports for QML2 will be installed to <dir> + (default ARCHDATADIR/qml) + -datadir <dir> ........ Arch-independent data used by Qt will be installed to <dir> + (default PREFIX) + -docdir <dir> ......... Documentation will be installed to <dir> + (default DATADIR/doc) + -translationdir <dir> . Translations of Qt programs will be installed to <dir> + (default DATADIR/translations) + -sysconfdir <dir> ..... Settings used by Qt programs will be looked for in <dir> + (default PREFIX/etc/xdg) + -examplesdir <dir> .... Examples will be installed to <dir> + (default PREFIX/examples) + -testsdir <dir> ....... Tests will be installed to <dir> + (default PREFIX/tests) + + -hostbindir <dir> .. Host executables will be installed to <dir> + (default HOSTPREFIX/bin) + -hostlibdir <dir> .. Host libraries will be installed to <dir> + (default HOSTPREFIX/lib) + -hostdatadir <dir> . Data used by qmake will be installed to <dir> + (default HOSTPREFIX) + +Configure options: + + The defaults (*) are usually acceptable. A plus (+) denotes a default value + that needs to be evaluated. If the evaluation succeeds, the feature is + included. Here is a short explanation of each option: + + * -release ........... Compile and link Qt with debugging turned off. + -debug ............. Compile and link Qt with debugging turned on. + -debug-and-release . Compile and link two versions of Qt, with and without + debugging turned on (Mac only). + + -force-debug-info .. Create symbol files for release builds. + + -developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting) + + -opensource ........ Compile and link the Open-Source Edition of Qt. + -commercial ........ Compile and link the Commercial Edition of Qt. + + -confirm-license ... Automatically acknowledge the license (use with + either -opensource or -commercial) + + -no-c++11 .......... Do not compile Qt with C++11 support enabled. + + -c++11 ............. Compile Qt with C++11 support enabled. + + * -shared ............ Create and use shared Qt libraries. + -static ............ Create and use static Qt libraries. + + * -process ........... Generate only a top-level Makefile. + -fully-process ..... Generate Makefiles for the entire Qt tree. + -dont-process ...... Do not generate any Makefiles. + + -no-largefile ...... Disables large file support. + + -largefile ......... Enables Qt to access files larger than 4 GB. + + -no-accessibility .. Do not compile Accessibility support. + Disabling accessibility is not recommended, as it will break QStyle + and may break other internal parts of Qt. + With this switch you create a source incompatible version of Qt, + which is unsupported. + + -accessibility ..... Compile Accessibility support. + + -no-sql-<driver> ... Disable SQL <driver> entirely. + -qt-sql-<driver> ... Enable a SQL <driver> in the Qt SQL module, by default + none are turned on. + -plugin-sql-<driver> Enable SQL <driver> as a plugin to be linked to + at run time. + + Possible values for <driver>: + [$CFG_SQL_AVAILABLE ] + + -system-sqlite ..... Use sqlite from the operating system. + + -no-javascript-jit . Do not build the JavaScriptCore JIT compiler. + + -javascript-jit .... Build the JavaScriptCore JIT compiler. + + -no-qml-debug ...... Do not build the in-process QML debugging support. + + -qml-debug ......... Build the QML debugging support. + + -platform target ... The operating system and compiler you are building + on (default detected from host system). + + See the README file for a list of supported + operating systems and compilers. + + -no-sse2 ........... Do not compile with use of SSE2 instructions. + -no-sse3 ........... Do not compile with use of SSE3 instructions. + -no-ssse3 .......... Do not compile with use of SSSE3 instructions. + -no-sse4.1 ......... Do not compile with use of SSE4.1 instructions. + -no-sse4.2 ......... Do not compile with use of SSE4.2 instructions. + -no-avx ............ Do not compile with use of AVX instructions. + -no-avx2 ........... Do not compile with use of AVX2 instructions. + -no-neon ........... Do not compile with use of NEON instructions. + -no-mips_dsp ....... Do not compile with use of MIPS DSP instructions. + -no-mips_dspr2 ..... Do not compile with use of MIPS DSP rev2 instructions. + + -qtnamespace <name> Wraps all Qt library code in 'namespace <name> {...}'. + -qtlibinfix <infix> Renames all libQt*.so to libQt*<infix>.so. + + -testcocoon ........ Instrument Qt with the TestCocoon code coverage tool. + -gcov .............. Instrument Qt with the GCov code coverage tool. + + -D <string> ........ Add an explicit define to the preprocessor. + -I <string> ........ Add an explicit include path. + -L <string> ........ Add an explicit library path. + + + -pkg-config ........ Use pkg-config to detect include and library paths. By default, + configure determines whether to use pkg-config or not with + some heuristics such as checking the environment variables. + -no-pkg-config ..... Disable use of pkg-config. + -force-pkg-config .. Force usage of pkg-config (skips pkg-config usability + detection heuristic). + + -help, -h .......... Display this information. + +Third Party Libraries: + + -qt-zlib ........... Use the zlib bundled with Qt. + + -system-zlib ....... Use zlib from the operating system. + See http://www.gzip.org/zlib + + -no-gif ............ Do not compile GIF reading support. + + -no-libpng ......... Do not compile PNG support. + -qt-libpng ......... Use the libpng bundled with Qt. + + -system-libpng ..... Use libpng from the operating system. + See http://www.libpng.org/pub/png + + -no-libjpeg ........ Do not compile JPEG support. + -qt-libjpeg ........ Use the libjpeg bundled with Qt. + + -system-libjpeg .... Use libjpeg from the operating system. + See http://www.ijg.org + + -no-freetype ....... Do not compile in Freetype2 support. + -qt-freetype ....... Use the libfreetype bundled with Qt. + + -system-freetype.... Use the libfreetype provided by the system (enabled if -fontconfig is active). + See http://www.freetype.org + + * -no-harfbuzz ....... Do not compile HarfBuzz-NG support. + -qt-harfbuzz ....... (experimental) Use HarfBuzz-NG bundled with Qt + to do text shaping. It can still be disabled + by setting QT_HARFBUZZ environment variable to "old". + -system-harfbuzz ... (experimental) Use HarfBuzz-NG from the operating system + to do text shaping. It can still be disabled + by setting QT_HARFBUZZ environment variable to "old". + + -no-openssl ........ Do not compile support for OpenSSL. + + -openssl ........... Enable run-time OpenSSL support. + -openssl-linked .... Enabled linked OpenSSL support. + + -qt-pcre ........... Use the PCRE library bundled with Qt. + + -system-pcre ....... Use the PCRE library from the operating system. + + -qt-xcb ............ Use xcb- libraries bundled with Qt. + (libxcb.so will still be used from operating system). + + -system-xcb ........ Use xcb- libraries from the operating system. + + -qt-xkbcommon ...... Use the xkbcommon library bundled with Qt. + + -system-xkbcommon .. Use the xkbcommon library from the operating system. + + -no-xinput2 ........ Do not compile XInput2 support. + * -xinput2 ........... Compile XInput2 support. + + -no-glib ........... Do not compile Glib support. + + -glib .............. Compile Glib support. + +Additional options: + + -make <part> ....... Add part to the list of parts to be built at make time. + (defaults to: $QT_DEFAULT_BUILD_PARTS) + -nomake <part> ..... Exclude part from the list of parts to be built. + + -skip <module> ..... Exclude an entire module from the build. + + -no-compile-examples ... Install only the sources of examples. + + -no-gui ............ Don't build the Qt GUI module and dependencies. + + -gui ............... Build the Qt GUI module and dependencies. + + -no-widgets ........ Don't build the Qt Widgets module and dependencies. + + -widgets ........... Build the Qt Widgets module and dependencies. + + -R <string> ........ Add an explicit runtime library path to the Qt + libraries. + -l <string> ........ Add an explicit library. + + -no-rpath .......... Do not use the library install path as a runtime + library path. + + -rpath ............. Link Qt libraries and executables using the library + install path as a runtime library path. Equivalent + to -R install_libpath + + -continue .......... Continue as far as possible if an error occurs. + + -verbose, -v ....... Print verbose information about each step of the + configure process. + + -silent ............ Reduce the build output so that warnings and errors + can be seen more easily. + + * -no-optimized-qmake ... Do not build qmake optimized. + -optimized-qmake ...... Build qmake optimized. + + -no-nis ............ Do not compile NIS support. + * -nis ............... Compile NIS support. + + -no-cups ........... Do not compile CUPS support. + * -cups .............. Compile CUPS support. + Requires cups/cups.h and libcups.so.2. + + -no-iconv .......... Do not compile support for iconv(3). + * -iconv ............. Compile support for iconv(3). + + -no-icu ............ Do not compile support for ICU libraries. + + -icu ............... Compile support for ICU libraries. + + -no-fontconfig ..... Do not compile FontConfig support. + + -fontconfig ........ Compile FontConfig support. + + -no-strip .......... Do not strip binaries and libraries of unneeded symbols. + * -strip ............. Strip binaries and libraries of unneeded symbols when installing. + + * -no-pch ............ Do not use precompiled header support. + -pch ............... Use precompiled header support. + + -no-dbus ........... Do not compile the Qt D-Bus module. + + -dbus .............. Compile the Qt D-Bus module and dynamically load libdbus-1. + -dbus-linked ....... Compile the Qt D-Bus module and link to libdbus-1. + + -reduce-relocations ..... Reduce relocations in the libraries through extra + linker optimizations (Qt/X11 and Qt for Embedded Linux only; + experimental; needs GNU ld >= 2.18). + + -force-asserts ........ Force Q_ASSERT to be enabled even in release builds. + + -device <name> ............... Cross-compile for device <name> (experimental) + -device-option <key=value> ... Add device specific options for the device mkspec + (experimental) + + -no-separate-debug-info . Do not store debug information in a separate file. + * -separate-debug-info .... Strip debug information into a separate file. + + -no-xcb ............ Do not compile Xcb (X protocol C-language Binding) support. + * -xcb ............... Compile Xcb support. + + -no-eglfs .......... Do not compile EGLFS (EGL Full Screen/Single Surface) support. + * -eglfs ............. Compile EGLFS support (Requires OpenGL ES 2 support). + + -no-directfb ....... Do not compile DirectFB support. + * -directfb .......... Compile DirectFB support. + + -no-linuxfb ........ Do not compile Linux Framebuffer support. + * -linuxfb ........... Compile Linux Framebuffer support. + + -no-kms ............ Do not compile KMS support. + * -kms ............... Compile KMS support (Requires EGL and OpenGL ES 2 support). + + -qpa <name> ......... Sets the default QPA platform (e.g xcb, cocoa, windows). + + -xplatform target ... The target platform when cross-compiling. + + -sysroot <dir> ...... Sets <dir> as the target compiler's and qmake's sysroot and also sets pkg-config paths. + -no-gcc-sysroot ..... When using -sysroot, it disables the passing of --sysroot to the compiler + + -no-feature-<feature> Do not compile in <feature>. + -feature-<feature> .. Compile in <feature>. The available features + are described in src/corelib/global/qfeatures.txt + + -qconfig local ...... Use src/corelib/global/qconfig-local.h rather than the + default ($CFG_QCONFIG). + + -qreal [double|float] typedef qreal to the specified type. The default is double. + Note that changing this flag affects binary compatibility. + + -no-opengl .......... Do not support OpenGL. + -opengl <api> ....... Enable OpenGL support + With no parameter, this will attempt to auto-detect + OpenGL ES 2, or regular desktop OpenGL. + Use es2 for <api> to override auto-detection. + + * -no-system-proxies .. Do not use system network proxies by default. + -system-proxies ..... Use system network proxies by default. + + -no-warnings-are-errors Make warnings be treated normally + -warnings-are-errors Make warnings be treated as errors + (enabled if -developer-build is active) + +QNX/Blackberry options: + + -no-slog2 .......... Do not compile with slog2 support. + -slog2 ............. Compile with slog2 support. + +MacOS/iOS options: + + -Fstring ........... Add an explicit framework path. + -fw string ......... Add an explicit framework. + + * -framework ......... Build Qt as a series of frameworks and + link tools against those frameworks. + -no-framework ...... Do not build Qt as a series of frameworks. + + -sdk <sdk> ......... Build Qt using Apple provided SDK <sdk>. The argument should be + one of the available SDKs as listed by 'xcodebuild -showsdks'. + Note that the argument applies only to Qt libraries and applications built + using the target mkspec - not host tools such as qmake, moc, rcc, etc. + +Android options: + + -android-sdk path .............. The Android SDK root path. + (default \$ANDROID_SDK_ROOT) + + -android-ndk path .............. The Android NDK root path. + (default \$ANDROID_NDK_ROOT) + + -android-ndk-platform .......... Sets the android platform + (default $CFG_DEFAULT_ANDROID_PLATFORM) + + -android-ndk-host .............. Sets the android NDK host (linux-x86, linux-x86_64, etc.) + (default \$ANDROID_NDK_HOST) + + -android-arch .................. Sets the android architecture (armeabi, armeabi-v7a, x86, mips) + (default $CFG_DEFAULT_ANDROID_TARGET_ARCH) + + -android-toolchain-version ..... Sets the android toolchain version + (default $CFG_DEFAULT_ANDROID_NDK_TOOLCHAIN_VERSION) +EOF + + exit 0 +fi # Help + +#------------------------------------------------------------------------------- +# build tree initialization +#------------------------------------------------------------------------------- # is this a shadow build? if [ "$OPT_SHADOW" = "maybe" ]; then @@ -2477,8 +2844,6 @@ if [ ! -d "${outpath}/lib/fonts" ]; then fi fi -fi ### help - #------------------------------------------------------------------------------- # platform detection #------------------------------------------------------------------------------- @@ -2640,7 +3005,6 @@ if [ -z "$PLATFORM" ]; then PLATFORM=unsupported/qnx-g++ ;; *) - if [ "$OPT_HELP" != "yes" ]; then echo >&2 echo " The build script does not currently recognize all" >&2 echo " platforms supported by Qt." >&2 @@ -2648,7 +3012,6 @@ if [ -z "$PLATFORM" ]; then echo " set the system/compiler combination you use." >&2 echo >&2 exit 2 - fi esac fi @@ -2740,7 +3103,6 @@ if [ "$XPLATFORM_ANDROID" = "yes" ]; then esac fi - if [ "$OPT_HELP" != "yes" ]; then if [ -z "$CFG_DEFAULT_ANDROID_NDK_ROOT" ]; then echo echo "Can not find Android NDK. Please use -android-ndk option to specify one" @@ -2771,7 +3133,6 @@ if [ "$XPLATFORM_ANDROID" = "yes" ]; then DeviceVar set DEFAULT_ANDROID_NDK_HOST "$CFG_DEFAULT_ANDROID_NDK_HOST" DeviceVar set DEFAULT_ANDROID_TARGET_ARCH "$CFG_DEFAULT_ANDROID_TARGET_ARCH" DeviceVar set DEFAULT_ANDROID_NDK_TOOLCHAIN_VERSION "$CFG_DEFAULT_ANDROID_NDK_TOOLCHAIN_VERSION" - fi fi if [ -d "$PLATFORM" ]; then @@ -2898,7 +3259,7 @@ QMAKE_CONF_COMPILER=`getXQMakeConf QMAKE_CXX` TEST_COMPILER=$QMAKE_CONF_COMPILER -if [ "$OPT_HELP" != "yes" ] && [ "$XPLATFORM_ANDROID" = "yes" ] ; then +if [ "$XPLATFORM_ANDROID" = "yes" ] ; then ANDROID_NDK_TOOLS_PREFIX= ANDROID_PLATFORM_ARCH= case $CFG_DEFAULT_ANDROID_TARGET_ARCH in @@ -3279,400 +3640,6 @@ if [ "$CFG_COMPILE_EXAMPLES" = "yes" ]; then QMAKE_CONFIG="$QMAKE_CONFIG compile_examples" fi -#------------------------------------------------------------------------------- -# help - interactive parts of the script _after_ this section please -#------------------------------------------------------------------------------- - -if [ "$OPT_HELP" = "yes" ]; then - cat <<EOF -Usage: $relconf [options] - -Installation options: - - These are optional, but you may specify install directories. - - -prefix <dir> ...... This will install everything relative to <dir> - (default /usr/local/Qt-${QT_VERSION}, \$PWD if -developer-build is active) - - -extprefix <dir> ... When -sysroot is used, install everything to <dir>, - rather than into SYSROOT/PREFIX. - - -hostprefix [dir] .. Tools and libraries needed when developing - applications are installed in [dir]. If [dir] is - not given, the current build directory will be used. - (default EXTPREFIX) - - You may use these to separate different parts of the install: - - -bindir <dir> ......... User executables will be installed to <dir> - (default PREFIX/bin) - -headerdir <dir> ...... Headers will be installed to <dir> - (default PREFIX/include) - -libdir <dir> ......... Libraries will be installed to <dir> - (default PREFIX/lib) - -archdatadir <dir> .... Arch-dependent data used by Qt will be installed to <dir> - (default PREFIX) - -plugindir <dir> ...... Plugins will be installed to <dir> - (default ARCHDATADIR/plugins) - -libexecdir <dir> ..... Program executables will be installed to <dir> - (default ARCHDATADIR/libexec, ARCHDATADIR/bin for MinGW) - -importdir <dir> ...... Imports for QML1 will be installed to <dir> - (default ARCHDATADIR/imports) - -qmldir <dir> ......... Imports for QML2 will be installed to <dir> - (default ARCHDATADIR/qml) - -datadir <dir> ........ Arch-independent data used by Qt will be installed to <dir> - (default PREFIX) - -docdir <dir> ......... Documentation will be installed to <dir> - (default DATADIR/doc) - -translationdir <dir> . Translations of Qt programs will be installed to <dir> - (default DATADIR/translations) - -sysconfdir <dir> ..... Settings used by Qt programs will be looked for in <dir> - (default PREFIX/etc/xdg) - -examplesdir <dir> .... Examples will be installed to <dir> - (default PREFIX/examples) - -testsdir <dir> ....... Tests will be installed to <dir> - (default PREFIX/tests) - - -hostbindir <dir> .. Host executables will be installed to <dir> - (default HOSTPREFIX/bin) - -hostlibdir <dir> .. Host libraries will be installed to <dir> - (default HOSTPREFIX/lib) - -hostdatadir <dir> . Data used by qmake will be installed to <dir> - (default HOSTPREFIX) - -Configure options: - - The defaults (*) are usually acceptable. A plus (+) denotes a default value - that needs to be evaluated. If the evaluation succeeds, the feature is - included. Here is a short explanation of each option: - - * -release ........... Compile and link Qt with debugging turned off. - -debug ............. Compile and link Qt with debugging turned on. - -debug-and-release . Compile and link two versions of Qt, with and without - debugging turned on (Mac only). - - -force-debug-info .. Create symbol files for release builds. - - -developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting) - - -opensource ........ Compile and link the Open-Source Edition of Qt. - -commercial ........ Compile and link the Commercial Edition of Qt. - - -confirm-license ... Automatically acknowledge the license (use with - either -opensource or -commercial) - - -no-c++11 .......... Do not compile Qt with C++11 support enabled. - + -c++11 ............. Compile Qt with C++11 support enabled. - - * -shared ............ Create and use shared Qt libraries. - -static ............ Create and use static Qt libraries. - - * -process ........... Generate only a top-level Makefile. - -fully-process ..... Generate Makefiles for the entire Qt tree. - -dont-process ...... Do not generate any Makefiles. - - -no-largefile ...... Disables large file support. - + -largefile ......... Enables Qt to access files larger than 4 GB. - - -no-accessibility .. Do not compile Accessibility support. - Disabling accessibility is not recommended, as it will break QStyle - and may break other internal parts of Qt. - With this switch you create a source incompatible version of Qt, - which is unsupported. - + -accessibility ..... Compile Accessibility support. - - -no-sql-<driver> ... Disable SQL <driver> entirely. - -qt-sql-<driver> ... Enable a SQL <driver> in the Qt SQL module, by default - none are turned on. - -plugin-sql-<driver> Enable SQL <driver> as a plugin to be linked to - at run time. - - Possible values for <driver>: - [$CFG_SQL_AVAILABLE ] - - -system-sqlite ..... Use sqlite from the operating system. - - -no-javascript-jit . Do not build the JavaScriptCore JIT compiler. - + -javascript-jit .... Build the JavaScriptCore JIT compiler. - - -no-qml-debug ...... Do not build the in-process QML debugging support. - + -qml-debug ......... Build the QML debugging support. - - -platform target ... The operating system and compiler you are building - on (default detected from host system). - - See the README file for a list of supported - operating systems and compilers. - - -no-sse2 ........... Do not compile with use of SSE2 instructions. - -no-sse3 ........... Do not compile with use of SSE3 instructions. - -no-ssse3 .......... Do not compile with use of SSSE3 instructions. - -no-sse4.1 ......... Do not compile with use of SSE4.1 instructions. - -no-sse4.2 ......... Do not compile with use of SSE4.2 instructions. - -no-avx ............ Do not compile with use of AVX instructions. - -no-avx2 ........... Do not compile with use of AVX2 instructions. - -no-neon ........... Do not compile with use of NEON instructions. - -no-mips_dsp ....... Do not compile with use of MIPS DSP instructions. - -no-mips_dspr2 ..... Do not compile with use of MIPS DSP rev2 instructions. - - -qtnamespace <name> Wraps all Qt library code in 'namespace <name> {...}'. - -qtlibinfix <infix> Renames all libQt*.so to libQt*<infix>.so. - - -testcocoon ........ Instrument Qt with the TestCocoon code coverage tool. - -gcov .............. Instrument Qt with the GCov code coverage tool. - - -D <string> ........ Add an explicit define to the preprocessor. - -I <string> ........ Add an explicit include path. - -L <string> ........ Add an explicit library path. - - + -pkg-config ........ Use pkg-config to detect include and library paths. By default, - configure determines whether to use pkg-config or not with - some heuristics such as checking the environment variables. - -no-pkg-config ..... Disable use of pkg-config. - -force-pkg-config .. Force usage of pkg-config (skips pkg-config usability - detection heuristic). - - -help, -h .......... Display this information. - -Third Party Libraries: - - -qt-zlib ........... Use the zlib bundled with Qt. - + -system-zlib ....... Use zlib from the operating system. - See http://www.gzip.org/zlib - - -no-gif ............ Do not compile GIF reading support. - - -no-libpng ......... Do not compile PNG support. - -qt-libpng ......... Use the libpng bundled with Qt. - + -system-libpng ..... Use libpng from the operating system. - See http://www.libpng.org/pub/png - - -no-libjpeg ........ Do not compile JPEG support. - -qt-libjpeg ........ Use the libjpeg bundled with Qt. - + -system-libjpeg .... Use libjpeg from the operating system. - See http://www.ijg.org - - -no-freetype ....... Do not compile in Freetype2 support. - -qt-freetype ....... Use the libfreetype bundled with Qt. - + -system-freetype.... Use the libfreetype provided by the system (enabled if -fontconfig is active). - See http://www.freetype.org - - * -no-harfbuzz ....... Do not compile HarfBuzz-NG support. - -qt-harfbuzz ....... (experimental) Use HarfBuzz-NG bundled with Qt - to do text shaping. It can still be disabled - by setting QT_HARFBUZZ environment variable to "old". - -system-harfbuzz ... (experimental) Use HarfBuzz-NG from the operating system - to do text shaping. It can still be disabled - by setting QT_HARFBUZZ environment variable to "old". - - -no-openssl ........ Do not compile support for OpenSSL. - + -openssl ........... Enable run-time OpenSSL support. - -openssl-linked .... Enabled linked OpenSSL support. - - -qt-pcre ........... Use the PCRE library bundled with Qt. - + -system-pcre ....... Use the PCRE library from the operating system. - - -qt-xcb ............ Use xcb- libraries bundled with Qt. - (libxcb.so will still be used from operating system). - + -system-xcb ........ Use xcb- libraries from the operating system. - - -qt-xkbcommon ...... Use the xkbcommon library bundled with Qt. - + -system-xkbcommon .. Use the xkbcommon library from the operating system. - -Additional options: - - -make <part> ....... Add part to the list of parts to be built at make time. - (defaults to: $QT_DEFAULT_BUILD_PARTS) - -nomake <part> ..... Exclude part from the list of parts to be built. - - -skip <module> ..... Exclude an entire module from the build. - - -no-compile-examples ... Install only the sources of examples. - - -no-gui ............ Don't build the Qt GUI module and dependencies. - + -gui ............... Build the Qt GUI module and dependencies. - - -no-widgets ........ Don't build the Qt Widgets module and dependencies. - + -widgets ........... Build the Qt Widgets module and dependencies. - - -R <string> ........ Add an explicit runtime library path to the Qt - libraries. - -l <string> ........ Add an explicit library. - - -no-rpath .......... Do not use the library install path as a runtime - library path. - + -rpath ............. Link Qt libraries and executables using the library - install path as a runtime library path. Equivalent - to -R install_libpath - - -continue .......... Continue as far as possible if an error occurs. - - -verbose, -v ....... Print verbose information about each step of the - configure process. - - -silent ............ Reduce the build output so that warnings and errors - can be seen more easily. - - * -no-optimized-qmake ... Do not build qmake optimized. - -optimized-qmake ...... Build qmake optimized. - - -no-nis ............ Do not compile NIS support. - * -nis ............... Compile NIS support. - - -no-cups ........... Do not compile CUPS support. - * -cups .............. Compile CUPS support. - Requires cups/cups.h and libcups.so.2. - - -no-iconv .......... Do not compile support for iconv(3). - * -iconv ............. Compile support for iconv(3). - - -no-icu ............ Do not compile support for ICU libraries. - + -icu ............... Compile support for ICU libraries. - - -no-fontconfig ..... Do not compile FontConfig support. - + -fontconfig ........ Compile FontConfig support. - - -no-strip .......... Do not strip binaries and libraries of unneeded symbols. - * -strip ............. Strip binaries and libraries of unneeded symbols when installing. - - * -no-pch ............ Do not use precompiled header support. - -pch ............... Use precompiled header support. - - -no-dbus ........... Do not compile the Qt D-Bus module. - + -dbus .............. Compile the Qt D-Bus module and dynamically load libdbus-1. - -dbus-linked ....... Compile the Qt D-Bus module and link to libdbus-1. - - -reduce-relocations ..... Reduce relocations in the libraries through extra - linker optimizations (Qt/X11 and Qt for Embedded Linux only; - experimental; needs GNU ld >= 2.18). - - -force-asserts ........ Force Q_ASSERT to be enabled even in release builds. - - -device <name> ............... Cross-compile for device <name> (experimental) - -device-option <key=value> ... Add device specific options for the device mkspec - (experimental) - - -no-separate-debug-info . Do not store debug information in a separate file. - * -separate-debug-info .... Strip debug information into a separate file. - - -no-xcb ............ Do not compile Xcb (X protocol C-language Binding) support. - * -xcb ............... Compile Xcb support. - - -no-eglfs .......... Do not compile EGLFS (EGL Full Screen/Single Surface) support. - * -eglfs ............. Compile EGLFS support (Requires OpenGL ES 2 support). - - -no-directfb ....... Do not compile DirectFB support. - * -directfb .......... Compile DirectFB support. - - -no-linuxfb ........ Do not compile Linux Framebuffer support. - * -linuxfb ........... Compile Linux Framebuffer support. - - -no-kms ............ Do not compile KMS support. - * -kms ............... Compile KMS support (Requires EGL and OpenGL ES 2 support). - - -qpa <name> ......... Sets the default QPA platform (e.g xcb, cocoa, windows). - - -xplatform target ... The target platform when cross-compiling. - - -sysroot <dir> ...... Sets <dir> as the target compiler's and qmake's sysroot and also sets pkg-config paths. - -no-gcc-sysroot ..... When using -sysroot, it disables the passing of --sysroot to the compiler - - -no-feature-<feature> Do not compile in <feature>. - -feature-<feature> .. Compile in <feature>. The available features - are described in src/corelib/global/qfeatures.txt - - -qconfig local ...... Use src/corelib/global/qconfig-local.h rather than the - default ($CFG_QCONFIG). - - -qreal [double|float] typedef qreal to the specified type. The default is double. - Note that changing this flag affects binary compatibility. - - -no-opengl .......... Do not support OpenGL. - -opengl <api> ....... Enable OpenGL support - With no parameter, this will attempt to auto-detect - OpenGL ES 2, or regular desktop OpenGL. - Use es2 for <api> to override auto-detection. - - * -no-system-proxies .. Do not use system network proxies by default. - -system-proxies ..... Use system network proxies by default. - - -no-warnings-are-errors Make warnings be treated normally - -warnings-are-errors Make warnings be treated as errors - (enabled if -developer-build is active) - - -no-glib ........... Do not compile Glib support. - + -glib .............. Compile Glib support. -EOF - -if [ "$XPLATFORM_MAEMO" = "yes" ]; then - cat << EOF - - -no-xinput2 ........ Do not compile XInput2 support. - * -xinput2 ........... Compile XInput2 support. - -EOF - -fi - -if [ "$XPLATFORM_QNX" = "yes" ]; then - cat << EOF - - -no-slog2 .......... Do not compile with slog2 support. - -slog2 ............. Compile with slog2 support. - -EOF - -fi - -if [ "$BUILD_ON_MAC" = "yes" ]; then - cat << EOF - -Qt/Mac only: - - -Fstring ........... Add an explicit framework path. - -fw string ......... Add an explicit framework. - - * -framework ......... Build Qt as a series of frameworks and - link tools against those frameworks. - -no-framework ...... Do not build Qt as a series of frameworks. - - -sdk <sdk> ......... Build Qt using Apple provided SDK <sdk>. The argument should be - one of the available SDKs as listed by 'xcodebuild -showsdks'. - Note that the argument applies only to Qt libraries and applications built - using the target mkspec - not host tools such as qmake, moc, rcc, etc. - -EOF -fi - -if [ "$XPLATFORM_ANDROID" = "yes" ]; then - cat << EOF - -Android options: - -android-sdk path .............. The Android SDK root path. - (default \$ANDROID_SDK_ROOT) - - -android-ndk path .............. The Android NDK root path. - (default \$ANDROID_NDK_ROOT) - - -android-ndk-platform .......... Sets the android platform - (default $CFG_DEFAULT_ANDROID_PLATFORM) - - -android-ndk-host .............. Sets the android NDK host (linux-x86, linux-x86_64, etc.) - (default \$ANDROID_NDK_HOST) - - -android-arch .................. Sets the android architecture (armeabi, armeabi-v7a, x86, mips) - (default $CFG_DEFAULT_ANDROID_TARGET_ARCH) - - -android-toolchain-version ..... Sets the android toolchain version - (default $CFG_DEFAULT_ANDROID_NDK_TOOLCHAIN_VERSION) -EOF - -fi - - exit 0 -fi # Help - - # ----------------------------------------------------------------------------- # LICENSING, INTERACTIVE PART # ----------------------------------------------------------------------------- |