diff options
Diffstat (limited to 'src/3rdparty/pcre/pcre_compile.c')
| -rw-r--r-- | src/3rdparty/pcre/pcre_compile.c | 8162 |
1 files changed, 8162 insertions, 0 deletions
diff --git a/src/3rdparty/pcre/pcre_compile.c b/src/3rdparty/pcre/pcre_compile.c new file mode 100644 index 0000000000..b0c57ca122 --- /dev/null +++ b/src/3rdparty/pcre/pcre_compile.c @@ -0,0 +1,8162 @@ +/************************************************* +* Perl-Compatible Regular Expressions * +*************************************************/ + +/* PCRE is a library of functions to support regular expressions whose syntax +and semantics are as close as possible to those of the Perl 5 language. + + Written by Philip Hazel + Copyright (c) 1997-2012 University of Cambridge + +----------------------------------------------------------------------------- +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of the University of Cambridge nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +----------------------------------------------------------------------------- +*/ + + +/* This module contains the external function pcre_compile(), along with +supporting internal functions that are not used by other modules. */ + + +#ifdef PCRE_HAVE_CONFIG_H +#include "config.h" +#endif + +#define NLBLOCK cd /* Block containing newline information */ +#define PSSTART start_pattern /* Field containing processed string start */ +#define PSEND end_pattern /* Field containing processed string end */ + +#include "pcre_internal.h" + + +/* When PCRE_DEBUG is defined, we need the pcre(16)_printint() function, which +is also used by pcretest. PCRE_DEBUG is not defined when building a production +library. We do not need to select pcre16_printint.c specially, because the +COMPILE_PCREx macro will already be appropriately set. */ + +#ifdef PCRE_DEBUG +/* pcre_printint.c should not include any headers */ +#define PCRE_INCLUDED +#include "pcre_printint.c" +#undef PCRE_INCLUDED +#endif + + +/* Macro for setting individual bits in class bitmaps. */ + +#define SETBIT(a,b) a[b/8] |= (1 << (b%8)) + +/* Maximum length value to check against when making sure that the integer that +holds the compiled pattern length does not overflow. We make it a bit less than +INT_MAX to allow for adding in group terminating bytes, so that we don't have +to check them every time. */ + +#define OFLOW_MAX (INT_MAX - 20) + + +/************************************************* +* Code parameters and static tables * +*************************************************/ + +/* This value specifies the size of stack workspace that is used during the +first pre-compile phase that determines how much memory is required. The regex +is partly compiled into this space, but the compiled parts are discarded as +soon as they can be, so that hopefully there will never be an overrun. The code +does, however, check for an overrun. The largest amount I've seen used is 218, +so this number is very generous. + +The same workspace is used during the second, actual compile phase for +remembering forward references to groups so that they can be filled in at the +end. Each entry in this list occupies LINK_SIZE bytes, so even when LINK_SIZE +is 4 there is plenty of room for most patterns. However, the memory can get +filled up by repetitions of forward references, for example patterns like +/(?1){0,1999}(b)/, and one user did hit the limit. The code has been changed so +that the workspace is expanded using malloc() in this situation. The value +below is therefore a minimum, and we put a maximum on it for safety. The +minimum is now also defined in terms of LINK_SIZE so that the use of malloc() +kicks in at the same number of forward references in all cases. */ + +#define COMPILE_WORK_SIZE (2048*LINK_SIZE) +#define COMPILE_WORK_SIZE_MAX (100*COMPILE_WORK_SIZE) + +/* The overrun tests check for a slightly smaller size so that they detect the +overrun before it actually does run off the end of the data block. */ + +#define WORK_SIZE_SAFETY_MARGIN (100) + +/* Private flags added to firstchar and reqchar. */ + +#define REQ_CASELESS 0x10000000l /* Indicates caselessness */ +#define REQ_VARY 0x20000000l /* Reqchar followed non-literal item */ + +/* Repeated character flags. */ + +#define UTF_LENGTH 0x10000000l /* The char contains its length. */ + +/* Table for handling escaped characters in the range '0'-'z'. Positive returns +are simple data values; negative values are for special things like \d and so +on. Zero means further processing is needed (for things like \x), or the escape +is invalid. */ + +#ifndef EBCDIC + +/* This is the "normal" table for ASCII systems or for EBCDIC systems running +in UTF-8 mode. */ + +static const short int escapes[] = { + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + CHAR_COLON, CHAR_SEMICOLON, + CHAR_LESS_THAN_SIGN, CHAR_EQUALS_SIGN, + CHAR_GREATER_THAN_SIGN, CHAR_QUESTION_MARK, + CHAR_COMMERCIAL_AT, -ESC_A, + -ESC_B, -ESC_C, + -ESC_D, -ESC_E, + 0, -ESC_G, + -ESC_H, 0, + 0, -ESC_K, + 0, 0, + -ESC_N, 0, + -ESC_P, -ESC_Q, + -ESC_R, -ESC_S, + 0, 0, + -ESC_V, -ESC_W, + -ESC_X, 0, + -ESC_Z, CHAR_LEFT_SQUARE_BRACKET, + CHAR_BACKSLASH, CHAR_RIGHT_SQUARE_BRACKET, + CHAR_CIRCUMFLEX_ACCENT, CHAR_UNDERSCORE, + CHAR_GRAVE_ACCENT, 7, + -ESC_b, 0, + -ESC_d, ESC_e, + ESC_f, 0, + -ESC_h, 0, + 0, -ESC_k, + 0, 0, + ESC_n, 0, + -ESC_p, 0, + ESC_r, -ESC_s, + ESC_tee, 0, + -ESC_v, -ESC_w, + 0, 0, + -ESC_z +}; + +#else + +/* This is the "abnormal" table for EBCDIC systems without UTF-8 support. */ + +static const short int escapes[] = { +/* 48 */ 0, 0, 0, '.', '<', '(', '+', '|', +/* 50 */ '&', 0, 0, 0, 0, 0, 0, 0, +/* 58 */ 0, 0, '!', '$', '*', ')', ';', '~', +/* 60 */ '-', '/', 0, 0, 0, 0, 0, 0, +/* 68 */ 0, 0, '|', ',', '%', '_', '>', '?', +/* 70 */ 0, 0, 0, 0, 0, 0, 0, 0, +/* 78 */ 0, '`', ':', '#', '@', '\'', '=', '"', +/* 80 */ 0, 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0, +/* 88 */-ESC_h, 0, 0, '{', 0, 0, 0, 0, +/* 90 */ 0, 0, -ESC_k, 'l', 0, ESC_n, 0, -ESC_p, +/* 98 */ 0, ESC_r, 0, '}', 0, 0, 0, 0, +/* A0 */ 0, '~', -ESC_s, ESC_tee, 0,-ESC_v, -ESC_w, 0, +/* A8 */ 0,-ESC_z, 0, 0, 0, '[', 0, 0, +/* B0 */ 0, 0, 0, 0, 0, 0, 0, 0, +/* B8 */ 0, 0, 0, 0, 0, ']', '=', '-', +/* C0 */ '{',-ESC_A, -ESC_B, -ESC_C, -ESC_D,-ESC_E, 0, -ESC_G, +/* C8 */-ESC_H, 0, 0, 0, 0, 0, 0, 0, +/* D0 */ '}', 0, -ESC_K, 0, 0,-ESC_N, 0, -ESC_P, +/* D8 */-ESC_Q,-ESC_R, 0, 0, 0, 0, 0, 0, +/* E0 */ '\\', 0, -ESC_S, 0, 0,-ESC_V, -ESC_W, -ESC_X, +/* E8 */ 0,-ESC_Z, 0, 0, 0, 0, 0, 0, +/* F0 */ 0, 0, 0, 0, 0, 0, 0, 0, +/* F8 */ 0, 0, 0, 0, 0, 0, 0, 0 +}; +#endif + + +/* Table of special "verbs" like (*PRUNE). This is a short table, so it is +searched linearly. Put all the names into a single string, in order to reduce +the number of relocations when a shared library is dynamically linked. The +string is built from string macros so that it works in UTF-8 mode on EBCDIC +platforms. */ + +typedef struct verbitem { + int len; /* Length of verb name */ + int op; /* Op when no arg, or -1 if arg mandatory */ + int op_arg; /* Op when arg present, or -1 if not allowed */ +} verbitem; + +static const char verbnames[] = + "\0" /* Empty name is a shorthand for MARK */ + STRING_MARK0 + STRING_ACCEPT0 + STRING_COMMIT0 + STRING_F0 + STRING_FAIL0 + STRING_PRUNE0 + STRING_SKIP0 + STRING_THEN; + +static const verbitem verbs[] = { + { 0, -1, OP_MARK }, + { 4, -1, OP_MARK }, + { 6, OP_ACCEPT, -1 }, + { 6, OP_COMMIT, -1 }, + { 1, OP_FAIL, -1 }, + { 4, OP_FAIL, -1 }, + { 5, OP_PRUNE, OP_PRUNE_ARG }, + { 4, OP_SKIP, OP_SKIP_ARG }, + { 4, OP_THEN, OP_THEN_ARG } +}; + +static const int verbcount = sizeof(verbs)/sizeof(verbitem); + + +/* Tables of names of POSIX character classes and their lengths. The names are +now all in a single string, to reduce the number of relocations when a shared +library is dynamically loaded. The list of lengths is terminated by a zero +length entry. The first three must be alpha, lower, upper, as this is assumed +for handling case independence. */ + +static const char posix_names[] = + STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0 + STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0 + STRING_graph0 STRING_print0 STRING_punct0 STRING_space0 + STRING_word0 STRING_xdigit; + +static const pcre_uint8 posix_name_lengths[] = { + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 }; + +/* Table of class bit maps for each POSIX class. Each class is formed from a +base map, with an optional addition or removal of another map. Then, for some +classes, there is some additional tweaking: for [:blank:] the vertical space +characters are removed, and for [:alpha:] and [:alnum:] the underscore +character is removed. The triples in the table consist of the base map offset, +second map offset or -1 if no second map, and a non-negative value for map +addition or a negative value for map subtraction (if there are two maps). The +absolute value of the third field has these meanings: 0 => no tweaking, 1 => +remove vertical space characters, 2 => remove underscore. */ + +static const int posix_class_maps[] = { + cbit_word, cbit_digit, -2, /* alpha */ + cbit_lower, -1, 0, /* lower */ + cbit_upper, -1, 0, /* upper */ + cbit_word, -1, 2, /* alnum - word without underscore */ + cbit_print, cbit_cntrl, 0, /* ascii */ + cbit_space, -1, 1, /* blank - a GNU extension */ + cbit_cntrl, -1, 0, /* cntrl */ + cbit_digit, -1, 0, /* digit */ + cbit_graph, -1, 0, /* graph */ + cbit_print, -1, 0, /* print */ + cbit_punct, -1, 0, /* punct */ + cbit_space, -1, 0, /* space */ + cbit_word, -1, 0, /* word - a Perl extension */ + cbit_xdigit,-1, 0 /* xdigit */ +}; + +/* Table of substitutes for \d etc when PCRE_UCP is set. The POSIX class +substitutes must be in the order of the names, defined above, and there are +both positive and negative cases. NULL means no substitute. */ + +#ifdef SUPPORT_UCP +static const pcre_uchar string_PNd[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_N, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_pNd[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_N, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_PXsp[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_s, CHAR_p, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_pXsp[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_s, CHAR_p, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_PXwd[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_w, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_pXwd[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_w, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; + +static const pcre_uchar *substitutes[] = { + string_PNd, /* \D */ + string_pNd, /* \d */ + string_PXsp, /* \S */ /* NOTE: Xsp is Perl space */ + string_pXsp, /* \s */ + string_PXwd, /* \W */ + string_pXwd /* \w */ +}; + +static const pcre_uchar string_pL[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_L, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_pLl[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_L, CHAR_l, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_pLu[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_L, CHAR_u, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_pXan[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_a, CHAR_n, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_h[] = { + CHAR_BACKSLASH, CHAR_h, '\0' }; +static const pcre_uchar string_pXps[] = { + CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_p, CHAR_s, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_PL[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_L, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_PLl[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_L, CHAR_l, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_PLu[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_L, CHAR_u, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_PXan[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_a, CHAR_n, CHAR_RIGHT_CURLY_BRACKET, '\0' }; +static const pcre_uchar string_H[] = { + CHAR_BACKSLASH, CHAR_H, '\0' }; +static const pcre_uchar string_PXps[] = { + CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, + CHAR_X, CHAR_p, CHAR_s, CHAR_RIGHT_CURLY_BRACKET, '\0' }; + +static const pcre_uchar *posix_substitutes[] = { + string_pL, /* alpha */ + string_pLl, /* lower */ + string_pLu, /* upper */ + string_pXan, /* alnum */ + NULL, /* ascii */ + string_h, /* blank */ + NULL, /* cntrl */ + string_pNd, /* digit */ + NULL, /* graph */ + NULL, /* print */ + NULL, /* punct */ + string_pXps, /* space */ /* NOTE: Xps is POSIX space */ + string_pXwd, /* word */ + NULL, /* xdigit */ + /* Negated cases */ + string_PL, /* ^alpha */ + string_PLl, /* ^lower */ + string_PLu, /* ^upper */ + string_PXan, /* ^alnum */ + NULL, /* ^ascii */ + string_H, /* ^blank */ + NULL, /* ^cntrl */ + string_PNd, /* ^digit */ + NULL, /* ^graph */ + NULL, /* ^print */ + NULL, /* ^punct */ + string_PXps, /* ^space */ /* NOTE: Xps is POSIX space */ + string_PXwd, /* ^word */ + NULL /* ^xdigit */ +}; +#define POSIX_SUBSIZE (sizeof(posix_substitutes) / sizeof(pcre_uchar *)) +#endif + +#define STRING(a) # a +#define XSTRING(s) STRING(s) + +/* The texts of compile-time error messages. These are "char *" because they +are passed to the outside world. Do not ever re-use any error number, because +they are documented. Always add a new error instead. Messages marked DEAD below +are no longer used. This used to be a table of strings, but in order to reduce +the number of relocations needed when a shared library is loaded dynamically, +it is now one long string. We cannot use a table of offsets, because the +lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we +simply count through to the one we want - this isn't a performance issue +because these strings are used only when there is a compilation error. + +Each substring ends with \0 to insert a null character. This includes the final +substring, so that the whole string ends with \0\0, which can be detected when +counting through. */ + +static const char error_texts[] = + "no error\0" + "\\ at end of pattern\0" + "\\c at end of pattern\0" + "unrecognized character follows \\\0" + "numbers out of order in {} quantifier\0" + /* 5 */ + "number too big in {} quantifier\0" + "missing terminating ] for character class\0" + "invalid escape sequence in character class\0" + "range out of order in character class\0" + "nothing to repeat\0" + /* 10 */ + "operand of unlimited repeat could match the empty string\0" /** DEAD **/ + "internal error: unexpected repeat\0" + "unrecognized character after (? or (?-\0" + "POSIX named classes are supported only within a class\0" + "missing )\0" + /* 15 */ + "reference to non-existent subpattern\0" + "erroffset passed as NULL\0" + "unknown option bit(s) set\0" + "missing ) after comment\0" + "parentheses nested too deeply\0" /** DEAD **/ + /* 20 */ + "regular expression is too large\0" + "failed to get memory\0" + "unmatched parentheses\0" + "internal error: code overflow\0" + "unrecognized character after (?<\0" + /* 25 */ + "lookbehind assertion is not fixed length\0" + "malformed number or name after (?(\0" + "conditional group contains more than two branches\0" + "assertion expected after (?(\0" + "(?R or (?[+-]digits must be followed by )\0" + /* 30 */ + "unknown POSIX class name\0" + "POSIX collating elements are not supported\0" + "this version of PCRE is compiled without UTF support\0" + "spare error\0" /** DEAD **/ + "character value in \\x{...} sequence is too large\0" + /* 35 */ + "invalid condition (?(0)\0" + "\\C not allowed in lookbehind assertion\0" + "PCRE does not support \\L, \\l, \\N{name}, \\U, or \\u\0" + "number after (?C is > 255\0" + "closing ) for (?C expected\0" + /* 40 */ + "recursive call could loop indefinitely\0" + "unrecognized character after (?P\0" + "syntax error in subpattern name (missing terminator)\0" + "two named subpatterns have the same name\0" + "invalid UTF-8 string\0" + /* 45 */ + "support for \\P, \\p, and \\X has not been compiled\0" + "malformed \\P or \\p sequence\0" + "unknown property name after \\P or \\p\0" + "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)\0" + "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")\0" + /* 50 */ + "repeated subpattern is too long\0" /** DEAD **/ + "octal value is greater than \\377 in 8-bit non-UTF-8 mode\0" + "internal error: overran compiling workspace\0" + "internal error: previously-checked referenced subpattern not found\0" + "DEFINE group contains more than one branch\0" + /* 55 */ + "repeating a DEFINE group is not allowed\0" /** DEAD **/ + "inconsistent NEWLINE options\0" + "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0" + "a numbered reference must not be zero\0" + "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0" + /* 60 */ + "(*VERB) not recognized\0" + "number is too big\0" + "subpattern name expected\0" + "digit expected after (?+\0" + "] is an invalid data character in JavaScript compatibility mode\0" + /* 65 */ + "different names for subpatterns of the same number are not allowed\0" + "(*MARK) must have an argument\0" + "this version of PCRE is not compiled with Unicode property support\0" + "\\c must be followed by an ASCII character\0" + "\\k is not followed by a braced, angle-bracketed, or quoted name\0" + /* 70 */ + "internal error: unknown opcode in find_fixedlength()\0" + "\\N is not supported in a class\0" + "too many forward references\0" + "disallowed Unicode code point (>= 0xd800 && <= 0xdfff)\0" + "invalid UTF-16 string\0" + ; + +/* Table to identify digits and hex digits. This is used when compiling +patterns. Note that the tables in chartables are dependent on the locale, and +may mark arbitrary characters as digits - but the PCRE compiling code expects +to handle only 0-9, a-z, and A-Z as digits when compiling. That is why we have +a private table here. It costs 256 bytes, but it is a lot faster than doing +character value tests (at least in some simple cases I timed), and in some +applications one wants PCRE to compile efficiently as well as match +efficiently. + +For convenience, we use the same bit definitions as in chartables: + + 0x04 decimal digit + 0x08 hexadecimal digit + +Then we can use ctype_digit and ctype_xdigit in the code. */ + +/* Using a simple comparison for decimal numbers rather than a memory read +is much faster, and the resulting code is simpler (the compiler turns it +into a subtraction and unsigned comparison). */ + +#define IS_DIGIT(x) ((x) >= CHAR_0 && (x) <= CHAR_9) + +#ifndef EBCDIC + +/* This is the "normal" case, for ASCII systems, and EBCDIC systems running in +UTF-8 mode. */ + +static const pcre_uint8 digitab[] = + { + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - ' */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ( - / */ + 0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 */ + 0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00, /* 8 - ? */ + 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* @ - G */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H - O */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* P - W */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* X - _ */ + 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* ` - g */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h - o */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* p - w */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* x -127 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */ + +#else + +/* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */ + +static const pcre_uint8 digitab[] = + { + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 0 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 10 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 32- 39 20 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 30 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 40 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 72- | */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 50 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 88- 95 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 60 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 104- ? */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 70 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */ + 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* 128- g 80 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144- p 90 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160- x A0 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 B0 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ + 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* { - G C0 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* } - P D0 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* \ - X E0 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */ + 0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 F0 */ + 0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */ + +static const pcre_uint8 ebcdic_chartab[] = { /* chartable partial dup */ + 0x80,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 0- 7 */ + 0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00, /* 8- 15 */ + 0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 16- 23 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ + 0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 32- 39 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */ + 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 */ + 0x00,0x00,0x00,0x80,0x00,0x80,0x80,0x80, /* 72- | */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 */ + 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00, /* 88- 95 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 */ + 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x80, /* 104- ? */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 */ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */ + 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* 128- g */ + 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */ + 0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* 144- p */ + 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */ + 0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* 160- x */ + 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */ + 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 */ + 0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ + 0x80,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* { - G */ + 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */ + 0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* } - P */ + 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */ + 0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* \ - X */ + 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */ + 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */ + 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */ +#endif + + +/* Definition to allow mutual recursion */ + +static BOOL + compile_regex(int, pcre_uchar **, const pcre_uchar **, int *, BOOL, BOOL, int, int, + int *, int *, branch_chain *, compile_data *, int *); + + + +/************************************************* +* Find an error text * +*************************************************/ + +/* The error texts are now all in one long string, to save on relocations. As +some of the text is of unknown length, we can't use a table of offsets. +Instead, just count through the strings. This is not a performance issue +because it happens only when there has been a compilation error. + +Argument: the error number +Returns: pointer to the error string +*/ + +static const char * +find_error_text(int n) +{ +const char *s = error_texts; +for (; n > 0; n--) + { + while (*s++ != 0) {}; + if (*s == 0) return "Error text not found (please report)"; + } +return s; +} + + +/************************************************* +* Expand the workspace * +*************************************************/ + +/* This function is called during the second compiling phase, if the number of +forward references fills the existing workspace, which is originally a block on +the stack. A larger block is obtained from malloc() unless the ultimate limit +has been reached or the increase will be rather small. + +Argument: pointer to the compile data block +Returns: 0 if all went well, else an error number +*/ + +static int +expand_workspace(compile_data *cd) +{ +pcre_uchar *newspace; +int newsize = cd->workspace_size * 2; + +if (newsize > COMPILE_WORK_SIZE_MAX) newsize = COMPILE_WORK_SIZE_MAX; +if (cd->workspace_size >= COMPILE_WORK_SIZE_MAX || + newsize - cd->workspace_size < WORK_SIZE_SAFETY_MARGIN) + return ERR72; + +newspace = (PUBL(malloc))(IN_UCHARS(newsize)); +if (newspace == NULL) return ERR21; +memcpy(newspace, cd->start_workspace, cd->workspace_size * sizeof(pcre_uchar)); +cd->hwm = (pcre_uchar *)newspace + (cd->hwm - cd->start_workspace); +if (cd->workspace_size > COMPILE_WORK_SIZE) + (PUBL(free))((void *)cd->start_workspace); +cd->start_workspace = newspace; +cd->workspace_size = newsize; +return 0; +} + + + +/************************************************* +* Check for counted repeat * +*************************************************/ + +/* This function is called when a '{' is encountered in a place where it might +start a quantifier. It looks ahead to see if it really is a quantifier or not. +It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd} +where the ddds are digits. + +Arguments: + p pointer to the first char after '{' + +Returns: TRUE or FALSE +*/ + +static BOOL +is_counted_repeat(const pcre_uchar *p) +{ +if (!IS_DIGIT(*p)) return FALSE; +p++; +while (IS_DIGIT(*p)) p++; +if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE; + +if (*p++ != CHAR_COMMA) return FALSE; +if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE; + +if (!IS_DIGIT(*p)) return FALSE; +p++; +while (IS_DIGIT(*p)) p++; + +return (*p == CHAR_RIGHT_CURLY_BRACKET); +} + + + +/************************************************* +* Handle escapes * +*************************************************/ + +/* This function is called when a \ has been encountered. It either returns a +positive value for a simple escape such as \n, or a negative value which +encodes one of the more complicated things such as \d. A backreference to group +n is returned as -(ESC_REF + n); ESC_REF is the highest ESC_xxx macro. When +UTF-8 is enabled, a positive value greater than 255 may be returned. On entry, +ptr is pointing at the \. On exit, it is on the final character of the escape +sequence. + +Arguments: + ptrptr points to the pattern position pointer + errorcodeptr points to the errorcode variable + bracount number of previous extracting brackets + options the options bits + isclass TRUE if inside a character class + +Returns: zero or positive => a data character + negative => a special escape sequence + on error, errorcodeptr is set +*/ + +static int +check_escape(const pcre_uchar **ptrptr, int *errorcodeptr, int bracount, + int options, BOOL isclass) +{ +/* PCRE_UTF16 has the same value as PCRE_UTF8. */ +BOOL utf = (options & PCRE_UTF8) != 0; +const pcre_uchar *ptr = *ptrptr + 1; +pcre_int32 c; +int i; + +GETCHARINCTEST(c, ptr); /* Get character value, increment pointer */ +ptr--; /* Set pointer back to the last byte */ + +/* If backslash is at the end of the pattern, it's an error. */ + +if (c == 0) *errorcodeptr = ERR1; + +/* Non-alphanumerics are literals. For digits or letters, do an initial lookup +in a table. A non-zero result is something that can be returned immediately. +Otherwise further processing may be required. */ + +#ifndef EBCDIC /* ASCII/UTF-8 coding */ +/* Not alphanumeric */ +else if (c < CHAR_0 || c > CHAR_z) {} +else if ((i = escapes[c - CHAR_0]) != 0) c = i; + +#else /* EBCDIC coding */ +/* Not alphanumeric */ +else if (c < 'a' || (!MAX_255(c) || (ebcdic_chartab[c] & 0x0E) == 0)) {} +else if ((i = escapes[c - 0x48]) != 0) c = i; +#endif + +/* Escapes that need further processing, or are illegal. */ + +else + { + const pcre_uchar *oldptr; + BOOL braced, negated; + + switch (c) + { + /* A number of Perl escapes are not handled by PCRE. We give an explicit + error. */ + + case CHAR_l: + case CHAR_L: + *errorcodeptr = ERR37; + break; + + case CHAR_u: + if ((options & PCRE_JAVASCRIPT_COMPAT) != 0) + { + /* In JavaScript, \u must be followed by four hexadecimal numbers. + Otherwise it is a lowercase u letter. */ + if (MAX_255(ptr[1]) && (digitab[ptr[1]] & ctype_xdigit) != 0 + && MAX_255(ptr[2]) && (digitab[ptr[2]] & ctype_xdigit) != 0 + && MAX_255(ptr[3]) && (digitab[ptr[3]] & ctype_xdigit) != 0 + && MAX_255(ptr[4]) && (digitab[ptr[4]] & ctype_xdigit) != 0) + { + c = 0; + for (i = 0; i < 4; ++i) + { + register int cc = *(++ptr); +#ifndef EBCDIC /* ASCII/UTF-8 coding */ + if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */ + c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10)); +#else /* EBCDIC coding */ + if (cc >= CHAR_a && cc <= CHAR_z) cc += 64; /* Convert to upper case */ + c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10)); +#endif + } + } + } + else + *errorcodeptr = ERR37; + break; + + case CHAR_U: + /* In JavaScript, \U is an uppercase U letter. */ + if ((options & PCRE_JAVASCRIPT_COMPAT) == 0) *errorcodeptr = ERR37; + break; + + /* In a character class, \g is just a literal "g". Outside a character + class, \g must be followed by one of a number of specific things: + + (1) A number, either plain or braced. If positive, it is an absolute + backreference. If negative, it is a relative backreference. This is a Perl + 5.10 feature. + + (2) Perl 5.10 also supports \g{name} as a reference to a named group. This + is part of Perl's movement towards a unified syntax for back references. As + this is synonymous with \k{name}, we fudge it up by pretending it really + was \k. + + (3) For Oniguruma compatibility we also support \g followed by a name or a + number either in angle brackets or in single quotes. However, these are + (possibly recursive) subroutine calls, _not_ backreferences. Just return + the -ESC_g code (cf \k). */ + + case CHAR_g: + if (isclass) break; + if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE) + { + c = -ESC_g; + break; + } + + /* Handle the Perl-compatible cases */ + + if (ptr[1] == CHAR_LEFT_CURLY_BRACKET) + { + const pcre_uchar *p; + for (p = ptr+2; *p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET; p++) + if (*p != CHAR_MINUS && !IS_DIGIT(*p)) break; + if (*p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET) + { + c = -ESC_k; + break; + } + braced = TRUE; + ptr++; + } + else braced = FALSE; + + if (ptr[1] == CHAR_MINUS) + { + negated = TRUE; + ptr++; + } + else negated = FALSE; + + /* The integer range is limited by the machine's int representation. */ + c = 0; + while (IS_DIGIT(ptr[1])) + { + if (((unsigned int)c) > INT_MAX / 10) /* Integer overflow */ + { + c = -1; + break; + } + c = c * 10 + *(++ptr) - CHAR_0; + } + if (((unsigned int)c) > INT_MAX) /* Integer overflow */ + { + while (IS_DIGIT(ptr[1])) + ptr++; + *errorcodeptr = ERR61; + break; + } + + if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET) + { + *errorcodeptr = ERR57; + break; + } + + if (c == 0) + { + *errorcodeptr = ERR58; + break; + } + + if (negated) + { + if (c > bracount) + { + *errorcodeptr = ERR15; + break; + } + c = bracount - (c - 1); + } + + c = -(ESC_REF + c); + break; + + /* The handling of escape sequences consisting of a string of digits + starting with one that is not zero is not straightforward. By experiment, + the way Perl works seems to be as follows: + + Outside a character class, the digits are read as a decimal number. If the + number is less than 10, or if there are that many previous extracting + left brackets, then it is a back reference. Otherwise, up to three octal + digits are read to form an escaped byte. Thus \123 is likely to be octal + 123 (cf \0123, which is octal 012 followed by the literal 3). If the octal + value is greater than 377, the least significant 8 bits are taken. Inside a + character class, \ followed by a digit is always an octal number. */ + + case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5: + case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9: + + if (!isclass) + { + oldptr = ptr; + /* The integer range is limited by the machine's int representation. */ + c -= CHAR_0; + while (IS_DIGIT(ptr[1])) + { + if (((unsigned int)c) > INT_MAX / 10) /* Integer overflow */ + { + c = -1; + break; + } + c = c * 10 + *(++ptr) - CHAR_0; + } + if (((unsigned int)c) > INT_MAX) /* Integer overflow */ + { + while (IS_DIGIT(ptr[1])) + ptr++; + *errorcodeptr = ERR61; + break; + } + if (c < 10 || c <= bracount) + { + c = -(ESC_REF + c); + break; + } + ptr = oldptr; /* Put the pointer back and fall through */ + } + + /* Handle an octal number following \. If the first digit is 8 or 9, Perl + generates a binary zero byte and treats the digit as a following literal. + Thus we have to pull back the pointer by one. */ + + if ((c = *ptr) >= CHAR_8) + { + ptr--; + c = 0; + break; + } + + /* \0 always starts an octal number, but we may drop through to here with a + larger first octal digit. The original code used just to take the least + significant 8 bits of octal numbers (I think this is what early Perls used + to do). Nowadays we allow for larger numbers in UTF-8 mode and 16-bit mode, + but no more than 3 octal digits. */ + + case CHAR_0: + c -= CHAR_0; + while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7) + c = c * 8 + *(++ptr) - CHAR_0; +#ifdef COMPILE_PCRE8 + if (!utf && c > 0xff) *errorcodeptr = ERR51; +#endif + break; + + /* \x is complicated. \x{ddd} is a character number which can be greater + than 0xff in utf or non-8bit mode, but only if the ddd are hex digits. + If not, { is treated as a data character. */ + + case CHAR_x: + if ((options & PCRE_JAVASCRIPT_COMPAT) != 0) + { + /* In JavaScript, \x must be followed by two hexadecimal numbers. + Otherwise it is a lowercase x letter. */ + if (MAX_255(ptr[1]) && (digitab[ptr[1]] & ctype_xdigit) != 0 + && MAX_255(ptr[2]) && (digitab[ptr[2]] & ctype_xdigit) != 0) + { + c = 0; + for (i = 0; i < 2; ++i) + { + register int cc = *(++ptr); +#ifndef EBCDIC /* ASCII/UTF-8 coding */ + if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */ + c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10)); +#else /* EBCDIC coding */ + if (cc >= CHAR_a && cc <= CHAR_z) cc += 64; /* Convert to upper case */ + c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10)); +#endif + } + } + break; + } + + if (ptr[1] == CHAR_LEFT_CURLY_BRACKET) + { + const pcre_uchar *pt = ptr + 2; + + c = 0; + while (MAX_255(*pt) && (digitab[*pt] & ctype_xdigit) != 0) + { + register int cc = *pt++; + if (c == 0 && cc == CHAR_0) continue; /* Leading zeroes */ + +#ifndef EBCDIC /* ASCII/UTF-8 coding */ + if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */ + c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10)); +#else /* EBCDIC coding */ + if (cc >= CHAR_a && cc <= CHAR_z) cc += 64; /* Convert to upper case */ + c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10)); +#endif + +#ifdef COMPILE_PCRE8 + if (c > (utf ? 0x10ffff : 0xff)) { c = -1; break; } +#else +#ifdef COMPILE_PCRE16 + if (c > (utf ? 0x10ffff : 0xffff)) { c = -1; break; } +#endif +#endif + } + + if (c < 0) + { + while (MAX_255(*pt) && (digitab[*pt] & ctype_xdigit) != 0) pt++; + *errorcodeptr = ERR34; + } + + if (*pt == CHAR_RIGHT_CURLY_BRACKET) + { + if (utf && c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73; + ptr = pt; + break; + } + + /* If the sequence of hex digits does not end with '}', then we don't + recognize this construct; fall through to the normal \x handling. */ + } + + /* Read just a single-byte hex-defined char */ + + c = 0; + while (i++ < 2 && MAX_255(ptr[1]) && (digitab[ptr[1]] & ctype_xdigit) != 0) + { + int cc; /* Some compilers don't like */ + cc = *(++ptr); /* ++ in initializers */ +#ifndef EBCDIC /* ASCII/UTF-8 coding */ + if (cc >= CHAR_a) cc -= 32; /* Convert to upper case */ + c = c * 16 + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10)); +#else /* EBCDIC coding */ + if (cc <= CHAR_z) cc += 64; /* Convert to upper case */ + c = c * 16 + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10)); +#endif + } + break; + + /* For \c, a following letter is upper-cased; then the 0x40 bit is flipped. + An error is given if the byte following \c is not an ASCII character. This + coding is ASCII-specific, but then the whole concept of \cx is + ASCII-specific. (However, an EBCDIC equivalent has now been added.) */ + + case CHAR_c: + c = *(++ptr); + if (c == 0) + { + *errorcodeptr = ERR2; + break; + } +#ifndef EBCDIC /* ASCII/UTF-8 coding */ + if (c > 127) /* Excludes all non-ASCII in either mode */ + { + *errorcodeptr = ERR68; + break; + } + if (c >= CHAR_a && c <= CHAR_z) c -= 32; + c ^= 0x40; +#else /* EBCDIC coding */ + if (c >= CHAR_a && c <= CHAR_z) c += 64; + c ^= 0xC0; +#endif + break; + + /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any + other alphanumeric following \ is an error if PCRE_EXTRA was set; + otherwise, for Perl compatibility, it is a literal. This code looks a bit + odd, but there used to be some cases other than the default, and there may + be again in future, so I haven't "optimized" it. */ + + default: + if ((options & PCRE_EXTRA) != 0) switch(c) + { + default: + *errorcodeptr = ERR3; + break; + } + break; + } + } + +/* Perl supports \N{name} for character names, as well as plain \N for "not +newline". PCRE does not support \N{name}. However, it does support +quantification such as \N{2,3}. */ + +if (c == -ESC_N && ptr[1] == CHAR_LEFT_CURLY_BRACKET && + !is_counted_repeat(ptr+2)) + *errorcodeptr = ERR37; + +/* If PCRE_UCP is set, we change the values for \d etc. */ + +if ((options & PCRE_UCP) != 0 && c <= -ESC_D && c >= -ESC_w) + c -= (ESC_DU - ESC_D); + +/* Set the pointer to the final character before returning. */ + +*ptrptr = ptr; +return c; +} + + + +#ifdef SUPPORT_UCP +/************************************************* +* Handle \P and \p * +*************************************************/ + +/* This function is called after \P or \p has been encountered, provided that +PCRE is compiled with support for Unicode properties. On entry, ptrptr is +pointing at the P or p. On exit, it is pointing at the final character of the +escape sequence. + +Argument: + ptrptr points to the pattern position pointer + negptr points to a boolean that is set TRUE for negation else FALSE + dptr points to an int that is set to the detailed property value + errorcodeptr points to the error code variable + +Returns: type value from ucp_type_table, or -1 for an invalid type +*/ + +static int +get_ucp(const pcre_uchar **ptrptr, BOOL *negptr, int *dptr, int *errorcodeptr) +{ +int c, i, bot, top; +const pcre_uchar *ptr = *ptrptr; +pcre_uchar name[32]; + +c = *(++ptr); +if (c == 0) goto ERROR_RETURN; + +*negptr = FALSE; + +/* \P or \p can be followed by a name in {}, optionally preceded by ^ for +negation. */ + +if (c == CHAR_LEFT_CURLY_BRACKET) + { + if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT) + { + *negptr = TRUE; + ptr++; + } + for (i = 0; i < (int)(sizeof(name) / sizeof(pcre_uchar)) - 1; i++) + { + c = *(++ptr); + if (c == 0) goto ERROR_RETURN; + if (c == CHAR_RIGHT_CURLY_BRACKET) break; + name[i] = c; + } + if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN; + name[i] = 0; + } + +/* Otherwise there is just one following character */ + +else + { + name[0] = c; + name[1] = 0; + } + +*ptrptr = ptr; + +/* Search for a recognized property name using binary chop */ + +bot = 0; +top = PRIV(utt_size); + +while (bot < top) + { + i = (bot + top) >> 1; + c = STRCMP_UC_C8(name, PRIV(utt_names) + PRIV(utt)[i].name_offset); + if (c == 0) + { + *dptr = PRIV(utt)[i].value; + return PRIV(utt)[i].type; + } + if (c > 0) bot = i + 1; else top = i; + } + +*errorcodeptr = ERR47; +*ptrptr = ptr; +return -1; + +ERROR_RETURN: +*errorcodeptr = ERR46; +*ptrptr = ptr; +return -1; +} +#endif + + + + +/************************************************* +* Read repeat counts * +*************************************************/ + +/* Read an item of the form {n,m} and return the values. This is called only +after is_counted_repeat() has confirmed that a repeat-count quantifier exists, +so the syntax is guaranteed to be correct, but we need to check the values. + +Arguments: + p pointer to first char after '{' + minp pointer to int for min + maxp pointer to int for max + returned as -1 if no max + errorcodeptr points to error code variable + +Returns: pointer to '}' on success; + current ptr on error, with errorcodeptr set non-zero +*/ + +static const pcre_uchar * +read_repeat_counts(const pcre_uchar *p, int *minp, int *maxp, int *errorcodeptr) +{ +int min = 0; +int max = -1; + +/* Read the minimum value and do a paranoid check: a negative value indicates +an integer overflow. */ + +while (IS_DIGIT(*p)) min = min * 10 + *p++ - CHAR_0; +if (min < 0 || min > 65535) + { + *errorcodeptr = ERR5; + return p; + } + +/* Read the maximum value if there is one, and again do a paranoid on its size. +Also, max must not be less than min. */ + +if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else + { + if (*(++p) != CHAR_RIGHT_CURLY_BRACKET) + { + max = 0; + while(IS_DIGIT(*p)) max = max * 10 + *p++ - CHAR_0; + if (max < 0 || max > 65535) + { + *errorcodeptr = ERR5; + return p; + } + if (max < min) + { + *errorcodeptr = ERR4; + return p; + } + } + } + +/* Fill in the required variables, and pass back the pointer to the terminating +'}'. */ + +*minp = min; +*maxp = max; +return p; +} + + + +/************************************************* +* Subroutine for finding forward reference * +*************************************************/ + +/* This recursive function is called only from find_parens() below. The +top-level call starts at the beginning of the pattern. All other calls must +start at a parenthesis. It scans along a pattern's text looking for capturing +subpatterns, and counting them. If it finds a named pattern that matches the +name it is given, it returns its number. Alternatively, if the name is NULL, it +returns when it reaches a given numbered subpattern. Recursion is used to keep +track of subpatterns that reset the capturing group numbers - the (?| feature. + +This function was originally called only from the second pass, in which we know +that if (?< or (?' or (?P< is encountered, the name will be correctly +terminated because that is checked in the first pass. There is now one call to +this function in the first pass, to check for a recursive back reference by +name (so that we can make the whole group atomic). In this case, we need check +only up to the current position in the pattern, and that is still OK because +and previous occurrences will have been checked. To make this work, the test +for "end of pattern" is a check against cd->end_pattern in the main loop, +instead of looking for a binary zero. This means that the special first-pass +call can adjust cd->end_pattern temporarily. (Checks for binary zero while +processing items within the loop are OK, because afterwards the main loop will +terminate.) + +Arguments: + ptrptr address of the current character pointer (updated) + cd compile background data + name name to seek, or NULL if seeking a numbered subpattern + lorn name length, or subpattern number if name is NULL + xmode TRUE if we are in /x mode + utf TRUE if we are in UTF-8 / UTF-16 mode + count pointer to the current capturing subpattern number (updated) + +Returns: the number of the named subpattern, or -1 if not found +*/ + +static int +find_parens_sub(pcre_uchar **ptrptr, compile_data *cd, const pcre_uchar *name, int lorn, + BOOL xmode, BOOL utf, int *count) +{ +pcre_uchar *ptr = *ptrptr; +int start_count = *count; +int hwm_count = start_count; +BOOL dup_parens = FALSE; + +/* If the first character is a parenthesis, check on the type of group we are +dealing with. The very first call may not start with a parenthesis. */ + +if (ptr[0] == CHAR_LEFT_PARENTHESIS) + { + /* Handle specials such as (*SKIP) or (*UTF8) etc. */ + + if (ptr[1] == CHAR_ASTERISK) ptr += 2; + + /* Handle a normal, unnamed capturing parenthesis. */ + + else if (ptr[1] != CHAR_QUESTION_MARK) + { + *count += 1; + if (name == NULL && *count == lorn) return *count; + ptr++; + } + + /* All cases now have (? at the start. Remember when we are in a group + where the parenthesis numbers are duplicated. */ + + else if (ptr[2] == CHAR_VERTICAL_LINE) + { + ptr += 3; + dup_parens = TRUE; + } + + /* Handle comments; all characters are allowed until a ket is reached. */ + + else if (ptr[2] == CHAR_NUMBER_SIGN) + { + for (ptr += 3; *ptr != 0; ptr++) if (*ptr == CHAR_RIGHT_PARENTHESIS) break; + goto FAIL_EXIT; + } + + /* Handle a condition. If it is an assertion, just carry on so that it + is processed as normal. If not, skip to the closing parenthesis of the + condition (there can't be any nested parens). */ + + else if (ptr[2] == CHAR_LEFT_PARENTHESIS) + { + ptr += 2; + if (ptr[1] != CHAR_QUESTION_MARK) + { + while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++; + if (*ptr != 0) ptr++; + } + } + + /* Start with (? but not a condition. */ + + else + { + ptr += 2; + if (*ptr == CHAR_P) ptr++; /* Allow optional P */ + + /* We have to disambiguate (?<! and (?<= from (?<name> for named groups */ + + if ((*ptr == CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_EXCLAMATION_MARK && + ptr[1] != CHAR_EQUALS_SIGN) || *ptr == CHAR_APOSTROPHE) + { + int term; + const pcre_uchar *thisname; + *count += 1; + if (name == NULL && *count == lorn) return *count; + term = *ptr++; + if (term == CHAR_LESS_THAN_SIGN) term = CHAR_GREATER_THAN_SIGN; + thisname = ptr; + while (*ptr != term) ptr++; + if (name != NULL && lorn == ptr - thisname && + STRNCMP_UC_UC(name, thisname, lorn) == 0) + return *count; + term++; + } + } + } + +/* Past any initial parenthesis handling, scan for parentheses or vertical +bars. Stop if we get to cd->end_pattern. Note that this is important for the +first-pass call when this value is temporarily adjusted to stop at the current +position. So DO NOT change this to a test for binary zero. */ + +for (; ptr < cd->end_pattern; ptr++) + { + /* Skip over backslashed characters and also entire \Q...\E */ + + if (*ptr == CHAR_BACKSLASH) + { + if (*(++ptr) == 0) goto FAIL_EXIT; + if (*ptr == CHAR_Q) for (;;) + { + while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {}; + if (*ptr == 0) goto FAIL_EXIT; + if (*(++ptr) == CHAR_E) break; + } + continue; + } + + /* Skip over character classes; this logic must be similar to the way they + are handled for real. If the first character is '^', skip it. Also, if the + first few characters (either before or after ^) are \Q\E or \E we skip them + too. This makes for compatibility with Perl. Note the use of STR macros to + encode "Q\\E" so that it works in UTF-8 on EBCDIC platforms. */ + + if (*ptr == CHAR_LEFT_SQUARE_BRACKET) + { + BOOL negate_class = FALSE; + for (;;) + { + if (ptr[1] == CHAR_BACKSLASH) + { + if (ptr[2] == CHAR_E) + ptr+= 2; + else if (STRNCMP_UC_C8(ptr + 2, + STR_Q STR_BACKSLASH STR_E, 3) == 0) + ptr += 4; + else + break; + } + else if (!negate_class && ptr[1] == CHAR_CIRCUMFLEX_ACCENT) + { + negate_class = TRUE; + ptr++; + } + else break; + } + + /* If the next character is ']', it is a data character that must be + skipped, except in JavaScript compatibility mode. */ + + if (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET && + (cd->external_options & PCRE_JAVASCRIPT_COMPAT) == 0) + ptr++; + + while (*(++ptr) != CHAR_RIGHT_SQUARE_BRACKET) + { + if (*ptr == 0) return -1; + if (*ptr == CHAR_BACKSLASH) + { + if (*(++ptr) == 0) goto FAIL_EXIT; + if (*ptr == CHAR_Q) for (;;) + { + while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {}; + if (*ptr == 0) goto FAIL_EXIT; + if (*(++ptr) == CHAR_E) break; + } + continue; + } + } + continue; + } + + /* Skip comments in /x mode */ + + if (xmode && *ptr == CHAR_NUMBER_SIGN) + { + ptr++; + while (*ptr != 0) + { + if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; } + ptr++; +#ifdef SUPPORT_UTF + if (utf) FORWARDCHAR(ptr); +#endif + } + if (*ptr == 0) goto FAIL_EXIT; + continue; + } + + /* Check for the special metacharacters */ + + if (*ptr == CHAR_LEFT_PARENTHESIS) + { + int rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf, count); + if (rc > 0) return rc; + if (*ptr == 0) goto FAIL_EXIT; + } + + else if (*ptr == CHAR_RIGHT_PARENTHESIS) + { + if (dup_parens && *count < hwm_count) *count = hwm_count; + goto FAIL_EXIT; + } + + else if (*ptr == CHAR_VERTICAL_LINE && dup_parens) + { + if (*count > hwm_count) hwm_count = *count; + *count = start_count; + } + } + +FAIL_EXIT: +*ptrptr = ptr; +return -1; +} + + + + +/************************************************* +* Find forward referenced subpattern * +*************************************************/ + +/* This function scans along a pattern's text looking for capturing +subpatterns, and counting them. If it finds a named pattern that matches the +name it is given, it returns its number. Alternatively, if the name is NULL, it +returns when it reaches a given numbered subpattern. This is used for forward +references to subpatterns. We used to be able to start this scan from the +current compiling point, using the current count value from cd->bracount, and +do it all in a single loop, but the addition of the possibility of duplicate +subpattern numbers means that we have to scan from the very start, in order to +take account of such duplicates, and to use a recursive function to keep track +of the different types of group. + +Arguments: + cd compile background data + name name to seek, or NULL if seeking a numbered subpattern + lorn name length, or subpattern number if name is NULL + xmode TRUE if we are in /x mode + utf TRUE if we are in UTF-8 / UTF-16 mode + +Returns: the number of the found subpattern, or -1 if not found +*/ + +static int +find_parens(compile_data *cd, const pcre_uchar *name, int lorn, BOOL xmode, + BOOL utf) +{ +pcre_uchar *ptr = (pcre_uchar *)cd->start_pattern; +int count = 0; +int rc; + +/* If the pattern does not start with an opening parenthesis, the first call +to find_parens_sub() will scan right to the end (if necessary). However, if it +does start with a parenthesis, find_parens_sub() will return when it hits the +matching closing parens. That is why we have to have a loop. */ + +for (;;) + { + rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf, &count); + if (rc > 0 || *ptr++ == 0) break; + } + +return rc; +} + + + + +/************************************************* +* Find first significant op code * +*************************************************/ + +/* This is called by several functions that scan a compiled expression looking +for a fixed first character, or an anchoring op code etc. It skips over things +that do not influence this. For some calls, it makes sense to skip negative +forward and all backward assertions, and also the \b assertion; for others it +does not. + +Arguments: + code pointer to the start of the group + skipassert TRUE if certain assertions are to be skipped + +Returns: pointer to the first significant opcode +*/ + +static const pcre_uchar* +first_significant_code(const pcre_uchar *code, BOOL skipassert) +{ +for (;;) + { + switch ((int)*code) + { + case OP_ASSERT_NOT: + case OP_ASSERTBACK: + case OP_ASSERTBACK_NOT: + if (!skipassert) return code; + do code += GET(code, 1); while (*code == OP_ALT); + code += PRIV(OP_lengths)[*code]; + break; + + case OP_WORD_BOUNDARY: + case OP_NOT_WORD_BOUNDARY: + if (!skipassert) return code; + /* Fall through */ + + case OP_CALLOUT: + case OP_CREF: + case OP_NCREF: + case OP_RREF: + case OP_NRREF: + case OP_DEF: + code += PRIV(OP_lengths)[*code]; + break; + + default: + return code; + } + } +/* Control never reaches here */ +} + + + + +/************************************************* +* Find the fixed length of a branch * +*************************************************/ + +/* Scan a branch and compute the fixed length of subject that will match it, +if the length is fixed. This is needed for dealing with backward assertions. +In UTF8 mode, the result is in characters rather than bytes. The branch is +temporarily terminated with OP_END when this function is called. + +This function is called when a backward assertion is encountered, so that if it +fails, the error message can point to the correct place in the pattern. +However, we cannot do this when the assertion contains subroutine calls, +because they can be forward references. We solve this by remembering this case +and doing the check at the end; a flag specifies which mode we are running in. + +Arguments: + code points to the start of the pattern (the bracket) + utf TRUE in UTF-8 / UTF-16 mode + atend TRUE if called when the pattern is complete + cd the "compile data" structure + +Returns: the fixed length, + or -1 if there is no fixed length, + or -2 if \C was encountered (in UTF-8 mode only) + or -3 if an OP_RECURSE item was encountered and atend is FALSE + or -4 if an unknown opcode was encountered (internal error) +*/ + +static int +find_fixedlength(pcre_uchar *code, BOOL utf, BOOL atend, compile_data *cd) +{ +int length = -1; + +register int branchlength = 0; +register pcre_uchar *cc = code + 1 + LINK_SIZE; + +/* Scan along the opcodes for this branch. If we get to the end of the +branch, check the length against that of the other branches. */ + +for (;;) + { + int d; + pcre_uchar *ce, *cs; + register int op = *cc; + + switch (op) + { + /* We only need to continue for OP_CBRA (normal capturing bracket) and + OP_BRA (normal non-capturing bracket) because the other variants of these + opcodes are all concerned with unlimited repeated groups, which of course + are not of fixed length. */ + + case OP_CBRA: + case OP_BRA: + case OP_ONCE: + case OP_ONCE_NC: + case OP_COND: + d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cd); + if (d < 0) return d; + branchlength += d; + do cc += GET(cc, 1); while (*cc == OP_ALT); + cc += 1 + LINK_SIZE; + break; + + /* Reached end of a branch; if it's a ket it is the end of a nested call. + If it's ALT it is an alternation in a nested call. An ACCEPT is effectively + an ALT. If it is END it's the end of the outer call. All can be handled by + the same code. Note that we must not include the OP_KETRxxx opcodes here, + because they all imply an unlimited repeat. */ + + case OP_ALT: + case OP_KET: + case OP_END: + case OP_ACCEPT: + case OP_ASSERT_ACCEPT: + if (length < 0) length = branchlength; + else if (length != branchlength) return -1; + if (*cc != OP_ALT) return length; + cc += 1 + LINK_SIZE; + branchlength = 0; + break; + + /* A true recursion implies not fixed length, but a subroutine call may + be OK. If the subroutine is a forward reference, we can't deal with + it until the end of the pattern, so return -3. */ + + case OP_RECURSE: + if (!atend) return -3; + cs = ce = (pcre_uchar *)cd->start_code + GET(cc, 1); /* Start subpattern */ + do ce += GET(ce, 1); while (*ce == OP_ALT); /* End subpattern */ + if (cc > cs && cc < ce) return -1; /* Recursion */ + d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cd); + if (d < 0) return d; + branchlength += d; + cc += 1 + LINK_SIZE; + break; + + /* Skip over assertive subpatterns */ + + case OP_ASSERT: + case OP_ASSERT_NOT: + case OP_ASSERTBACK: + case OP_ASSERTBACK_NOT: + do cc += GET(cc, 1); while (*cc == OP_ALT); + cc += PRIV(OP_lengths)[*cc]; + break; + + /* Skip over things that don't match chars */ + + case OP_MARK: + case OP_PRUNE_ARG: + case OP_SKIP_ARG: + case OP_THEN_ARG: + cc += cc[1] + PRIV(OP_lengths)[*cc]; + break; + + case OP_CALLOUT: + case OP_CIRC: + case OP_CIRCM: + case OP_CLOSE: + case OP_COMMIT: + case OP_CREF: + case OP_DEF: + case OP_DOLL: + case OP_DOLLM: + case OP_EOD: + case OP_EODN: + case OP_FAIL: + case OP_NCREF: + case OP_NRREF: + case OP_NOT_WORD_BOUNDARY: + case OP_PRUNE: + case OP_REVERSE: + case OP_RREF: + case OP_SET_SOM: + case OP_SKIP: + case OP_SOD: + case OP_SOM: + case OP_THEN: + case OP_WORD_BOUNDARY: + cc += PRIV(OP_lengths)[*cc]; + break; + + /* Handle literal characters */ + + case OP_CHAR: + case OP_CHARI: + case OP_NOT: + case OP_NOTI: + branchlength++; + cc += 2; +#ifdef SUPPORT_UTF + if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]); +#endif + break; + + /* Handle exact repetitions. The count is already in characters, but we + need to skip over a multibyte character in UTF8 mode. */ + + case OP_EXACT: + case OP_EXACTI: + case OP_NOTEXACT: + case OP_NOTEXACTI: + branchlength += GET2(cc,1); + cc += 2 + IMM2_SIZE; +#ifdef SUPPORT_UTF + if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]); +#endif + break; + + case OP_TYPEEXACT: + branchlength += GET2(cc,1); + if (cc[1 + IMM2_SIZE] == OP_PROP || cc[1 + IMM2_SIZE] == OP_NOTPROP) cc += 2; + cc += 1 + IMM2_SIZE + 1; + break; + + /* Handle single-char matchers */ + + case OP_PROP: + case OP_NOTPROP: + cc += 2; + /* Fall through */ + + case OP_HSPACE: + case OP_VSPACE: + case OP_NOT_HSPACE: + case OP_NOT_VSPACE: + case OP_NOT_DIGIT: + case OP_DIGIT: + case OP_NOT_WHITESPACE: + case OP_WHITESPACE: + case OP_NOT_WORDCHAR: + case OP_WORDCHAR: + case OP_ANY: + case OP_ALLANY: + branchlength++; + cc++; + break; + + /* The single-byte matcher isn't allowed. This only happens in UTF-8 mode; + otherwise \C is coded as OP_ALLANY. */ + + case OP_ANYBYTE: + return -2; + + /* Check a class for variable quantification */ + +#if defined SUPPORT_UTF || defined COMPILE_PCRE16 + case OP_XCLASS: + cc += GET(cc, 1) - PRIV(OP_lengths)[OP_CLASS]; + /* Fall through */ +#endif + + case OP_CLASS: + case OP_NCLASS: + cc += PRIV(OP_lengths)[OP_CLASS]; + + switch (*cc) + { + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRQUERY: + case OP_CRMINQUERY: + return -1; + + case OP_CRRANGE: + case OP_CRMINRANGE: + if (GET2(cc,1) != GET2(cc,1+IMM2_SIZE)) return -1; + branchlength += GET2(cc,1); + cc += 1 + 2 * IMM2_SIZE; + break; + + default: + branchlength++; + } + break; + + /* Anything else is variable length */ + + case OP_ANYNL: + case OP_BRAMINZERO: + case OP_BRAPOS: + case OP_BRAPOSZERO: + case OP_BRAZERO: + case OP_CBRAPOS: + case OP_EXTUNI: + case OP_KETRMAX: + case OP_KETRMIN: + case OP_KETRPOS: + case OP_MINPLUS: + case OP_MINPLUSI: + case OP_MINQUERY: + case OP_MINQUERYI: + case OP_MINSTAR: + case OP_MINSTARI: + case OP_MINUPTO: + case OP_MINUPTOI: + case OP_NOTMINPLUS: + case OP_NOTMINPLUSI: + case OP_NOTMINQUERY: + case OP_NOTMINQUERYI: + case OP_NOTMINSTAR: + case OP_NOTMINSTARI: + case OP_NOTMINUPTO: + case OP_NOTMINUPTOI: + case OP_NOTPLUS: + case OP_NOTPLUSI: + case OP_NOTPOSPLUS: + case OP_NOTPOSPLUSI: + case OP_NOTPOSQUERY: + case OP_NOTPOSQUERYI: + case OP_NOTPOSSTAR: + case OP_NOTPOSSTARI: + case OP_NOTPOSUPTO: + case OP_NOTPOSUPTOI: + case OP_NOTQUERY: + case OP_NOTQUERYI: + case OP_NOTSTAR: + case OP_NOTSTARI: + case OP_NOTUPTO: + case OP_NOTUPTOI: + case OP_PLUS: + case OP_PLUSI: + case OP_POSPLUS: + case OP_POSPLUSI: + case OP_POSQUERY: + case OP_POSQUERYI: + case OP_POSSTAR: + case OP_POSSTARI: + case OP_POSUPTO: + case OP_POSUPTOI: + case OP_QUERY: + case OP_QUERYI: + case OP_REF: + case OP_REFI: + case OP_SBRA: + case OP_SBRAPOS: + case OP_SCBRA: + case OP_SCBRAPOS: + case OP_SCOND: + case OP_SKIPZERO: + case OP_STAR: + case OP_STARI: + case OP_TYPEMINPLUS: + case OP_TYPEMINQUERY: + case OP_TYPEMINSTAR: + case OP_TYPEMINUPTO: + case OP_TYPEPLUS: + case OP_TYPEPOSPLUS: + case OP_TYPEPOSQUERY: + case OP_TYPEPOSSTAR: + case OP_TYPEPOSUPTO: + case OP_TYPEQUERY: + case OP_TYPESTAR: + case OP_TYPEUPTO: + case OP_UPTO: + case OP_UPTOI: + return -1; + + /* Catch unrecognized opcodes so that when new ones are added they + are not forgotten, as has happened in the past. */ + + default: + return -4; + } + } +/* Control never gets here */ +} + + + + +/************************************************* +* Scan compiled regex for specific bracket * +*************************************************/ + +/* This little function scans through a compiled pattern until it finds a +capturing bracket with the given number, or, if the number is negative, an +instance of OP_REVERSE for a lookbehind. The function is global in the C sense +so that it can be called from pcre_study() when finding the minimum matching +length. + +Arguments: + code points to start of expression + utf TRUE in UTF-8 / UTF-16 mode + number the required bracket number or negative to find a lookbehind + +Returns: pointer to the opcode for the bracket, or NULL if not found +*/ + +const pcre_uchar * +PRIV(find_bracket)(const pcre_uchar *code, BOOL utf, int number) +{ +for (;;) + { + register int c = *code; + + if (c == OP_END) return NULL; + + /* XCLASS is used for classes that cannot be represented just by a bit + map. This includes negated single high-valued characters. The length in + the table is zero; the actual length is stored in the compiled code. */ + + if (c == OP_XCLASS) code += GET(code, 1); + + /* Handle recursion */ + + else if (c == OP_REVERSE) + { + if (number < 0) return (pcre_uchar *)code; + code += PRIV(OP_lengths)[c]; + } + + /* Handle capturing bracket */ + + else if (c == OP_CBRA || c == OP_SCBRA || + c == OP_CBRAPOS || c == OP_SCBRAPOS) + { + int n = GET2(code, 1+LINK_SIZE); + if (n == number) return (pcre_uchar *)code; + code += PRIV(OP_lengths)[c]; + } + + /* Otherwise, we can get the item's length from the table, except that for + repeated character types, we have to test for \p and \P, which have an extra + two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we + must add in its length. */ + + else + { + switch(c) + { + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + case OP_TYPEPOSSTAR: + case OP_TYPEPOSPLUS: + case OP_TYPEPOSQUERY: + if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2; + break; + + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + case OP_TYPEEXACT: + case OP_TYPEPOSUPTO: + if (code[1 + IMM2_SIZE] == OP_PROP + || code[1 + IMM2_SIZE] == OP_NOTPROP) code += 2; + break; + + case OP_MARK: + case OP_PRUNE_ARG: + case OP_SKIP_ARG: + code += code[1]; + break; + + case OP_THEN_ARG: + code += code[1]; + break; + } + + /* Add in the fixed length from the table */ + + code += PRIV(OP_lengths)[c]; + + /* In UTF-8 mode, opcodes that are followed by a character may be followed by + a multi-byte character. The length in the table is a minimum, so we have to + arrange to skip the extra bytes. */ + +#ifdef SUPPORT_UTF + if (utf) switch(c) + { + case OP_CHAR: + case OP_CHARI: + case OP_EXACT: + case OP_EXACTI: + case OP_UPTO: + case OP_UPTOI: + case OP_MINUPTO: + case OP_MINUPTOI: + case OP_POSUPTO: + case OP_POSUPTOI: + case OP_STAR: + case OP_STARI: + case OP_MINSTAR: + case OP_MINSTARI: + case OP_POSSTAR: + case OP_POSSTARI: + case OP_PLUS: + case OP_PLUSI: + case OP_MINPLUS: + case OP_MINPLUSI: + case OP_POSPLUS: + case OP_POSPLUSI: + case OP_QUERY: + case OP_QUERYI: + case OP_MINQUERY: + case OP_MINQUERYI: + case OP_POSQUERY: + case OP_POSQUERYI: + if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]); + break; + } +#else + (void)(utf); /* Keep compiler happy by referencing function argument */ +#endif + } + } +} + + + +/************************************************* +* Scan compiled regex for recursion reference * +*************************************************/ + +/* This little function scans through a compiled pattern until it finds an +instance of OP_RECURSE. + +Arguments: + code points to start of expression + utf TRUE in UTF-8 / UTF-16 mode + +Returns: pointer to the opcode for OP_RECURSE, or NULL if not found +*/ + +static const pcre_uchar * +find_recurse(const pcre_uchar *code, BOOL utf) +{ +for (;;) + { + register int c = *code; + if (c == OP_END) return NULL; + if (c == OP_RECURSE) return code; + + /* XCLASS is used for classes that cannot be represented just by a bit + map. This includes negated single high-valued characters. The length in + the table is zero; the actual length is stored in the compiled code. */ + + if (c == OP_XCLASS) code += GET(code, 1); + + /* Otherwise, we can get the item's length from the table, except that for + repeated character types, we have to test for \p and \P, which have an extra + two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we + must add in its length. */ + + else + { + switch(c) + { + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + case OP_TYPEPOSSTAR: + case OP_TYPEPOSPLUS: + case OP_TYPEPOSQUERY: + if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2; + break; + + case OP_TYPEPOSUPTO: + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + case OP_TYPEEXACT: + if (code[1 + IMM2_SIZE] == OP_PROP + || code[1 + IMM2_SIZE] == OP_NOTPROP) code += 2; + break; + + case OP_MARK: + case OP_PRUNE_ARG: + case OP_SKIP_ARG: + code += code[1]; + break; + + case OP_THEN_ARG: + code += code[1]; + break; + } + + /* Add in the fixed length from the table */ + + code += PRIV(OP_lengths)[c]; + + /* In UTF-8 mode, opcodes that are followed by a character may be followed + by a multi-byte character. The length in the table is a minimum, so we have + to arrange to skip the extra bytes. */ + +#ifdef SUPPORT_UTF + if (utf) switch(c) + { + case OP_CHAR: + case OP_CHARI: + case OP_EXACT: + case OP_EXACTI: + case OP_UPTO: + case OP_UPTOI: + case OP_MINUPTO: + case OP_MINUPTOI: + case OP_POSUPTO: + case OP_POSUPTOI: + case OP_STAR: + case OP_STARI: + case OP_MINSTAR: + case OP_MINSTARI: + case OP_POSSTAR: + case OP_POSSTARI: + case OP_PLUS: + case OP_PLUSI: + case OP_MINPLUS: + case OP_MINPLUSI: + case OP_POSPLUS: + case OP_POSPLUSI: + case OP_QUERY: + case OP_QUERYI: + case OP_MINQUERY: + case OP_MINQUERYI: + case OP_POSQUERY: + case OP_POSQUERYI: + if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]); + break; + } +#else + (void)(utf); /* Keep compiler happy by referencing function argument */ +#endif + } + } +} + + + +/************************************************* +* Scan compiled branch for non-emptiness * +*************************************************/ + +/* This function scans through a branch of a compiled pattern to see whether it +can match the empty string or not. It is called from could_be_empty() +below and from compile_branch() when checking for an unlimited repeat of a +group that can match nothing. Note that first_significant_code() skips over +backward and negative forward assertions when its final argument is TRUE. If we +hit an unclosed bracket, we return "empty" - this means we've struck an inner +bracket whose current branch will already have been scanned. + +Arguments: + code points to start of search + endcode points to where to stop + utf TRUE if in UTF-8 / UTF-16 mode + cd contains pointers to tables etc. + +Returns: TRUE if what is matched could be empty +*/ + +static BOOL +could_be_empty_branch(const pcre_uchar *code, const pcre_uchar *endcode, + BOOL utf, compile_data *cd) +{ +register int c; +for (code = first_significant_code(code + PRIV(OP_lengths)[*code], TRUE); + code < endcode; + code = first_significant_code(code + PRIV(OP_lengths)[c], TRUE)) + { + const pcre_uchar *ccode; + + c = *code; + + /* Skip over forward assertions; the other assertions are skipped by + first_significant_code() with a TRUE final argument. */ + + if (c == OP_ASSERT) + { + do code += GET(code, 1); while (*code == OP_ALT); + c = *code; + continue; + } + + /* For a recursion/subroutine call, if its end has been reached, which + implies a backward reference subroutine call, we can scan it. If it's a + forward reference subroutine call, we can't. To detect forward reference + we have to scan up the list that is kept in the workspace. This function is + called only when doing the real compile, not during the pre-compile that + measures the size of the compiled pattern. */ + + if (c == OP_RECURSE) + { + const pcre_uchar *scode; + BOOL empty_branch; + + /* Test for forward reference */ + + for (scode = cd->start_workspace; scode < cd->hwm; scode += LINK_SIZE) + if (GET(scode, 0) == code + 1 - cd->start_code) return TRUE; + + /* Not a forward reference, test for completed backward reference */ + + empty_branch = FALSE; + scode = cd->start_code + GET(code, 1); + if (GET(scode, 1) == 0) return TRUE; /* Unclosed */ + + /* Completed backwards reference */ + + do + { + if (could_be_empty_branch(scode, endcode, utf, cd)) + { + empty_branch = TRUE; + break; + } + scode += GET(scode, 1); + } + while (*scode == OP_ALT); + + if (!empty_branch) return FALSE; /* All branches are non-empty */ + continue; + } + + /* Groups with zero repeats can of course be empty; skip them. */ + + if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO || + c == OP_BRAPOSZERO) + { + code += PRIV(OP_lengths)[c]; + do code += GET(code, 1); while (*code == OP_ALT); + c = *code; + continue; + } + + /* A nested group that is already marked as "could be empty" can just be + skipped. */ + + if (c == OP_SBRA || c == OP_SBRAPOS || + c == OP_SCBRA || c == OP_SCBRAPOS) + { + do code += GET(code, 1); while (*code == OP_ALT); + c = *code; + continue; + } + + /* For other groups, scan the branches. */ + + if (c == OP_BRA || c == OP_BRAPOS || + c == OP_CBRA || c == OP_CBRAPOS || + c == OP_ONCE || c == OP_ONCE_NC || + c == OP_COND) + { + BOOL empty_branch; + if (GET(code, 1) == 0) return TRUE; /* Hit unclosed bracket */ + + /* If a conditional group has only one branch, there is a second, implied, + empty branch, so just skip over the conditional, because it could be empty. + Otherwise, scan the individual branches of the group. */ + + if (c == OP_COND && code[GET(code, 1)] != OP_ALT) + code += GET(code, 1); + else + { + empty_branch = FALSE; + do + { + if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd)) + empty_branch = TRUE; + code += GET(code, 1); + } + while (*code == OP_ALT); + if (!empty_branch) return FALSE; /* All branches are non-empty */ + } + + c = *code; + continue; + } + + /* Handle the other opcodes */ + + switch (c) + { + /* Check for quantifiers after a class. XCLASS is used for classes that + cannot be represented just by a bit map. This includes negated single + high-valued characters. The length in PRIV(OP_lengths)[] is zero; the + actual length is stored in the compiled code, so we must update "code" + here. */ + +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + case OP_XCLASS: + ccode = code += GET(code, 1); + goto CHECK_CLASS_REPEAT; +#endif + + case OP_CLASS: + case OP_NCLASS: + ccode = code + PRIV(OP_lengths)[OP_CLASS]; + +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + CHECK_CLASS_REPEAT: +#endif + + switch (*ccode) + { + case OP_CRSTAR: /* These could be empty; continue */ + case OP_CRMINSTAR: + case OP_CRQUERY: + case OP_CRMINQUERY: + break; + + default: /* Non-repeat => class must match */ + case OP_CRPLUS: /* These repeats aren't empty */ + case OP_CRMINPLUS: + return FALSE; + + case OP_CRRANGE: + case OP_CRMINRANGE: + if (GET2(ccode, 1) > 0) return FALSE; /* Minimum > 0 */ + break; + } + break; + + /* Opcodes that must match a character */ + + case OP_PROP: + case OP_NOTPROP: + case OP_EXTUNI: + case OP_NOT_DIGIT: + case OP_DIGIT: + case OP_NOT_WHITESPACE: + case OP_WHITESPACE: + case OP_NOT_WORDCHAR: + case OP_WORDCHAR: + case OP_ANY: + case OP_ALLANY: + case OP_ANYBYTE: + case OP_CHAR: + case OP_CHARI: + case OP_NOT: + case OP_NOTI: + case OP_PLUS: + case OP_MINPLUS: + case OP_POSPLUS: + case OP_EXACT: + case OP_NOTPLUS: + case OP_NOTMINPLUS: + case OP_NOTPOSPLUS: + case OP_NOTEXACT: + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEPOSPLUS: + case OP_TYPEEXACT: + return FALSE; + + /* These are going to continue, as they may be empty, but we have to + fudge the length for the \p and \P cases. */ + + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPOSSTAR: + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + case OP_TYPEPOSQUERY: + if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2; + break; + + /* Same for these */ + + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + case OP_TYPEPOSUPTO: + if (code[1 + IMM2_SIZE] == OP_PROP + || code[1 + IMM2_SIZE] == OP_NOTPROP) code += 2; + break; + + /* End of branch */ + + case OP_KET: + case OP_KETRMAX: + case OP_KETRMIN: + case OP_KETRPOS: + case OP_ALT: + return TRUE; + + /* In UTF-8 mode, STAR, MINSTAR, POSSTAR, QUERY, MINQUERY, POSQUERY, UPTO, + MINUPTO, and POSUPTO may be followed by a multibyte character */ + +#ifdef SUPPORT_UTF + case OP_STAR: + case OP_STARI: + case OP_MINSTAR: + case OP_MINSTARI: + case OP_POSSTAR: + case OP_POSSTARI: + case OP_QUERY: + case OP_QUERYI: + case OP_MINQUERY: + case OP_MINQUERYI: + case OP_POSQUERY: + case OP_POSQUERYI: + if (utf && HAS_EXTRALEN(code[1])) code += GET_EXTRALEN(code[1]); + break; + + case OP_UPTO: + case OP_UPTOI: + case OP_MINUPTO: + case OP_MINUPTOI: + case OP_POSUPTO: + case OP_POSUPTOI: + if (utf && HAS_EXTRALEN(code[1 + IMM2_SIZE])) code += GET_EXTRALEN(code[1 + IMM2_SIZE]); + break; +#endif + + /* MARK, and PRUNE/SKIP/THEN with an argument must skip over the argument + string. */ + + case OP_MARK: + case OP_PRUNE_ARG: + case OP_SKIP_ARG: + code += code[1]; + break; + + case OP_THEN_ARG: + code += code[1]; + break; + + /* None of the remaining opcodes are required to match a character. */ + + default: + break; + } + } + +return TRUE; +} + + + +/************************************************* +* Scan compiled regex for non-emptiness * +*************************************************/ + +/* This function is called to check for left recursive calls. We want to check +the current branch of the current pattern to see if it could match the empty +string. If it could, we must look outwards for branches at other levels, +stopping when we pass beyond the bracket which is the subject of the recursion. +This function is called only during the real compile, not during the +pre-compile. + +Arguments: + code points to start of the recursion + endcode points to where to stop (current RECURSE item) + bcptr points to the chain of current (unclosed) branch starts + utf TRUE if in UTF-8 / UTF-16 mode + cd pointers to tables etc + +Returns: TRUE if what is matched could be empty +*/ + +static BOOL +could_be_empty(const pcre_uchar *code, const pcre_uchar *endcode, + branch_chain *bcptr, BOOL utf, compile_data *cd) +{ +while (bcptr != NULL && bcptr->current_branch >= code) + { + if (!could_be_empty_branch(bcptr->current_branch, endcode, utf, cd)) + return FALSE; + bcptr = bcptr->outer; + } +return TRUE; +} + + + +/************************************************* +* Check for POSIX class syntax * +*************************************************/ + +/* This function is called when the sequence "[:" or "[." or "[=" is +encountered in a character class. It checks whether this is followed by a +sequence of characters terminated by a matching ":]" or ".]" or "=]". If we +reach an unescaped ']' without the special preceding character, return FALSE. + +Originally, this function only recognized a sequence of letters between the +terminators, but it seems that Perl recognizes any sequence of characters, +though of course unknown POSIX names are subsequently rejected. Perl gives an +"Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE +didn't consider this to be a POSIX class. Likewise for [:1234:]. + +The problem in trying to be exactly like Perl is in the handling of escapes. We +have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX +class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code +below handles the special case of \], but does not try to do any other escape +processing. This makes it different from Perl for cases such as [:l\ower:] +where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize +"l\ower". This is a lesser evil that not diagnosing bad classes when Perl does, +I think. + +A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not. +It seems that the appearance of a nested POSIX class supersedes an apparent +external class. For example, [:a[:digit:]b:] matches "a", "b", ":", or +a digit. + +In Perl, unescaped square brackets may also appear as part of class names. For +example, [:a[:abc]b:] gives unknown POSIX class "[:abc]b:]". However, for +[:a[:abc]b][b:] it gives unknown POSIX class "[:abc]b][b:]", which does not +seem right at all. PCRE does not allow closing square brackets in POSIX class +names. + +Arguments: + ptr pointer to the initial [ + endptr where to return the end pointer + +Returns: TRUE or FALSE +*/ + +static BOOL +check_posix_syntax(const pcre_uchar *ptr, const pcre_uchar **endptr) +{ +int terminator; /* Don't combine these lines; the Solaris cc */ +terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */ +for (++ptr; *ptr != 0; ptr++) + { + if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) + ptr++; + else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE; + else + { + if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) + { + *endptr = ptr; + return TRUE; + } + if (*ptr == CHAR_LEFT_SQUARE_BRACKET && + (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || + ptr[1] == CHAR_EQUALS_SIGN) && + check_posix_syntax(ptr, endptr)) + return FALSE; + } + } +return FALSE; +} + + + + +/************************************************* +* Check POSIX class name * +*************************************************/ + +/* This function is called to check the name given in a POSIX-style class entry +such as [:alnum:]. + +Arguments: + ptr points to the first letter + len the length of the name + +Returns: a value representing the name, or -1 if unknown +*/ + +static int +check_posix_name(const pcre_uchar *ptr, int len) +{ +const char *pn = posix_names; +register int yield = 0; +while (posix_name_lengths[yield] != 0) + { + if (len == posix_name_lengths[yield] && + STRNCMP_UC_C8(ptr, pn, len) == 0) return yield; + pn += posix_name_lengths[yield] + 1; + yield++; + } +return -1; +} + + +/************************************************* +* Adjust OP_RECURSE items in repeated group * +*************************************************/ + +/* OP_RECURSE items contain an offset from the start of the regex to the group +that is referenced. This means that groups can be replicated for fixed +repetition simply by copying (because the recursion is allowed to refer to +earlier groups that are outside the current group). However, when a group is +optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is +inserted before it, after it has been compiled. This means that any OP_RECURSE +items within it that refer to the group itself or any contained groups have to +have their offsets adjusted. That one of the jobs of this function. Before it +is called, the partially compiled regex must be temporarily terminated with +OP_END. + +This function has been extended with the possibility of forward references for +recursions and subroutine calls. It must also check the list of such references +for the group we are dealing with. If it finds that one of the recursions in +the current group is on this list, it adjusts the offset in the list, not the +value in the reference (which is a group number). + +Arguments: + group points to the start of the group + adjust the amount by which the group is to be moved + utf TRUE in UTF-8 / UTF-16 mode + cd contains pointers to tables etc. + save_hwm the hwm forward reference pointer at the start of the group + +Returns: nothing +*/ + +static void +adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd, + pcre_uchar *save_hwm) +{ +pcre_uchar *ptr = group; + +while ((ptr = (pcre_uchar *)find_recurse(ptr, utf)) != NULL) + { + int offset; + pcre_uchar *hc; + + /* See if this recursion is on the forward reference list. If so, adjust the + reference. */ + + for (hc = save_hwm; hc < cd->hwm; hc += LINK_SIZE) + { + offset = GET(hc, 0); + if (cd->start_code + offset == ptr + 1) + { + PUT(hc, 0, offset + adjust); + break; + } + } + + /* Otherwise, adjust the recursion offset if it's after the start of this + group. */ + + if (hc >= cd->hwm) + { + offset = GET(ptr, 1); + if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust); + } + + ptr += 1 + LINK_SIZE; + } +} + + + +/************************************************* +* Insert an automatic callout point * +*************************************************/ + +/* This function is called when the PCRE_AUTO_CALLOUT option is set, to insert +callout points before each pattern item. + +Arguments: + code current code pointer + ptr current pattern pointer + cd pointers to tables etc + +Returns: new code pointer +*/ + +static pcre_uchar * +auto_callout(pcre_uchar *code, const pcre_uchar *ptr, compile_data *cd) +{ +*code++ = OP_CALLOUT; +*code++ = 255; +PUT(code, 0, (int)(ptr - cd->start_pattern)); /* Pattern offset */ +PUT(code, LINK_SIZE, 0); /* Default length */ +return code + 2 * LINK_SIZE; +} + + + +/************************************************* +* Complete a callout item * +*************************************************/ + +/* A callout item contains the length of the next item in the pattern, which +we can't fill in till after we have reached the relevant point. This is used +for both automatic and manual callouts. + +Arguments: + previous_callout points to previous callout item + ptr current pattern pointer + cd pointers to tables etc + +Returns: nothing +*/ + +static void +complete_callout(pcre_uchar *previous_callout, const pcre_uchar *ptr, compile_data *cd) +{ +int length = (int)(ptr - cd->start_pattern - GET(previous_callout, 2)); +PUT(previous_callout, 2 + LINK_SIZE, length); +} + + + +#ifdef SUPPORT_UCP +/************************************************* +* Get othercase range * +*************************************************/ + +/* This function is passed the start and end of a class range, in UTF-8 mode +with UCP support. It searches up the characters, looking for internal ranges of +characters in the "other" case. Each call returns the next one, updating the +start address. + +Arguments: + cptr points to starting character value; updated + d end value + ocptr where to put start of othercase range + odptr where to put end of othercase range + +Yield: TRUE when range returned; FALSE when no more +*/ + +static BOOL +get_othercase_range(unsigned int *cptr, unsigned int d, unsigned int *ocptr, + unsigned int *odptr) +{ +unsigned int c, othercase, next; + +for (c = *cptr; c <= d; c++) + { if ((othercase = UCD_OTHERCASE(c)) != c) break; } + +if (c > d) return FALSE; + +*ocptr = othercase; +next = othercase + 1; + +for (++c; c <= d; c++) + { + if (UCD_OTHERCASE(c) != next) break; + next++; + } + +*odptr = next - 1; +*cptr = c; + +return TRUE; +} + + + +/************************************************* +* Check a character and a property * +*************************************************/ + +/* This function is called by check_auto_possessive() when a property item +is adjacent to a fixed character. + +Arguments: + c the character + ptype the property type + pdata the data for the type + negated TRUE if it's a negated property (\P or \p{^) + +Returns: TRUE if auto-possessifying is OK +*/ + +static BOOL +check_char_prop(int c, int ptype, int pdata, BOOL negated) +{ +const ucd_record *prop = GET_UCD(c); +switch(ptype) + { + case PT_LAMP: + return (prop->chartype == ucp_Lu || + prop->chartype == ucp_Ll || + prop->chartype == ucp_Lt) == negated; + + case PT_GC: + return (pdata == PRIV(ucp_gentype)[prop->chartype]) == negated; + + case PT_PC: + return (pdata == prop->chartype) == negated; + + case PT_SC: + return (pdata == prop->script) == negated; + + /* These are specials */ + + case PT_ALNUM: + return (PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N) == negated; + + case PT_SPACE: /* Perl space */ + return (PRIV(ucp_gentype)[prop->chartype] == ucp_Z || + c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR) + == negated; + + case PT_PXSPACE: /* POSIX space */ + return (PRIV(ucp_gentype)[prop->chartype] == ucp_Z || + c == CHAR_HT || c == CHAR_NL || c == CHAR_VT || + c == CHAR_FF || c == CHAR_CR) + == negated; + + case PT_WORD: + return (PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N || + c == CHAR_UNDERSCORE) == negated; + } +return FALSE; +} +#endif /* SUPPORT_UCP */ + + + +/************************************************* +* Check if auto-possessifying is possible * +*************************************************/ + +/* This function is called for unlimited repeats of certain items, to see +whether the next thing could possibly match the repeated item. If not, it makes +sense to automatically possessify the repeated item. + +Arguments: + previous pointer to the repeated opcode + utf TRUE in UTF-8 / UTF-16 mode + ptr next character in pattern + options options bits + cd contains pointers to tables etc. + +Returns: TRUE if possessifying is wanted +*/ + +static BOOL +check_auto_possessive(const pcre_uchar *previous, BOOL utf, + const pcre_uchar *ptr, int options, compile_data *cd) +{ +pcre_int32 c, next; +int op_code = *previous++; + +/* Skip whitespace and comments in extended mode */ + +if ((options & PCRE_EXTENDED) != 0) + { + for (;;) + { + while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_space) != 0) ptr++; + if (*ptr == CHAR_NUMBER_SIGN) + { + ptr++; + while (*ptr != 0) + { + if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; } + ptr++; +#ifdef SUPPORT_UTF + if (utf) FORWARDCHAR(ptr); +#endif + } + } + else break; + } + } + +/* If the next item is one that we can handle, get its value. A non-negative +value is a character, a negative value is an escape value. */ + +if (*ptr == CHAR_BACKSLASH) + { + int temperrorcode = 0; + next = check_escape(&ptr, &temperrorcode, cd->bracount, options, FALSE); + if (temperrorcode != 0) return FALSE; + ptr++; /* Point after the escape sequence */ + } +else if (!MAX_255(*ptr) || (cd->ctypes[*ptr] & ctype_meta) == 0) + { +#ifdef SUPPORT_UTF + if (utf) { GETCHARINC(next, ptr); } else +#endif + next = *ptr++; + } +else return FALSE; + +/* Skip whitespace and comments in extended mode */ + +if ((options & PCRE_EXTENDED) != 0) + { + for (;;) + { + while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_space) != 0) ptr++; + if (*ptr == CHAR_NUMBER_SIGN) + { + ptr++; + while (*ptr != 0) + { + if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; } + ptr++; +#ifdef SUPPORT_UTF + if (utf) FORWARDCHAR(ptr); +#endif + } + } + else break; + } + } + +/* If the next thing is itself optional, we have to give up. */ + +if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK || + STRNCMP_UC_C8(ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0) + return FALSE; + +/* Now compare the next item with the previous opcode. First, handle cases when +the next item is a character. */ + +if (next >= 0) switch(op_code) + { + case OP_CHAR: +#ifdef SUPPORT_UTF + GETCHARTEST(c, previous); +#else + c = *previous; +#endif + return c != next; + + /* For CHARI (caseless character) we must check the other case. If we have + Unicode property support, we can use it to test the other case of + high-valued characters. */ + + case OP_CHARI: +#ifdef SUPPORT_UTF + GETCHARTEST(c, previous); +#else + c = *previous; +#endif + if (c == next) return FALSE; +#ifdef SUPPORT_UTF + if (utf) + { + unsigned int othercase; + if (next < 128) othercase = cd->fcc[next]; else +#ifdef SUPPORT_UCP + othercase = UCD_OTHERCASE((unsigned int)next); +#else + othercase = NOTACHAR; +#endif + return (unsigned int)c != othercase; + } + else +#endif /* SUPPORT_UTF */ + return (c != TABLE_GET((unsigned int)next, cd->fcc, next)); /* Non-UTF-8 mode */ + + /* For OP_NOT and OP_NOTI, the data is always a single-byte character. These + opcodes are not used for multi-byte characters, because they are coded using + an XCLASS instead. */ + + case OP_NOT: + return (c = *previous) == next; + + case OP_NOTI: + if ((c = *previous) == next) return TRUE; +#ifdef SUPPORT_UTF + if (utf) + { + unsigned int othercase; + if (next < 128) othercase = cd->fcc[next]; else +#ifdef SUPPORT_UCP + othercase = UCD_OTHERCASE(next); +#else + othercase = NOTACHAR; +#endif + return (unsigned int)c == othercase; + } + else +#endif /* SUPPORT_UTF */ + return (c == (int)(TABLE_GET((unsigned int)next, cd->fcc, next))); /* Non-UTF-8 mode */ + + /* Note that OP_DIGIT etc. are generated only when PCRE_UCP is *not* set. + When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */ + + case OP_DIGIT: + return next > 127 || (cd->ctypes[next] & ctype_digit) == 0; + + case OP_NOT_DIGIT: + return next <= 127 && (cd->ctypes[next] & ctype_digit) != 0; + + case OP_WHITESPACE: + return next > 127 || (cd->ctypes[next] & ctype_space) == 0; + + case OP_NOT_WHITESPACE: + return next <= 127 && (cd->ctypes[next] & ctype_space) != 0; + + case OP_WORDCHAR: + return next > 127 || (cd->ctypes[next] & ctype_word) == 0; + + case OP_NOT_WORDCHAR: + return next <= 127 && (cd->ctypes[next] & ctype_word) != 0; + + case OP_HSPACE: + case OP_NOT_HSPACE: + switch(next) + { + case 0x09: + case 0x20: + case 0xa0: + case 0x1680: + case 0x180e: + case 0x2000: + case 0x2001: + case 0x2002: + case 0x2003: + case 0x2004: + case 0x2005: + case 0x2006: + case 0x2007: + case 0x2008: + case 0x2009: + case 0x200A: + case 0x202f: + case 0x205f: + case 0x3000: + return op_code == OP_NOT_HSPACE; + default: + return op_code != OP_NOT_HSPACE; + } + + case OP_ANYNL: + case OP_VSPACE: + case OP_NOT_VSPACE: + switch(next) + { + case 0x0a: + case 0x0b: + case 0x0c: + case 0x0d: + case 0x85: + case 0x2028: + case 0x2029: + return op_code == OP_NOT_VSPACE; + default: + return op_code != OP_NOT_VSPACE; + } + +#ifdef SUPPORT_UCP + case OP_PROP: + return check_char_prop(next, previous[0], previous[1], FALSE); + + case OP_NOTPROP: + return check_char_prop(next, previous[0], previous[1], TRUE); +#endif + + default: + return FALSE; + } + + +/* Handle the case when the next item is \d, \s, etc. Note that when PCRE_UCP +is set, \d turns into ESC_du rather than ESC_d, etc., so ESC_d etc. are +generated only when PCRE_UCP is *not* set, that is, when only ASCII +characteristics are recognized. Similarly, the opcodes OP_DIGIT etc. are +replaced by OP_PROP codes when PCRE_UCP is set. */ + +switch(op_code) + { + case OP_CHAR: + case OP_CHARI: +#ifdef SUPPORT_UTF + GETCHARTEST(c, previous); +#else + c = *previous; +#endif + switch(-next) + { + case ESC_d: + return c > 127 || (cd->ctypes[c] & ctype_digit) == 0; + + case ESC_D: + return c <= 127 && (cd->ctypes[c] & ctype_digit) != 0; + + case ESC_s: + return c > 127 || (cd->ctypes[c] & ctype_space) == 0; + + case ESC_S: + return c <= 127 && (cd->ctypes[c] & ctype_space) != 0; + + case ESC_w: + return c > 127 || (cd->ctypes[c] & ctype_word) == 0; + + case ESC_W: + return c <= 127 && (cd->ctypes[c] & ctype_word) != 0; + + case ESC_h: + case ESC_H: + switch(c) + { + case 0x09: + case 0x20: + case 0xa0: + case 0x1680: + case 0x180e: + case 0x2000: + case 0x2001: + case 0x2002: + case 0x2003: + case 0x2004: + case 0x2005: + case 0x2006: + case 0x2007: + case 0x2008: + case 0x2009: + case 0x200A: + case 0x202f: + case 0x205f: + case 0x3000: + return -next != ESC_h; + default: + return -next == ESC_h; + } + + case ESC_v: + case ESC_V: + switch(c) + { + case 0x0a: + case 0x0b: + case 0x0c: + case 0x0d: + case 0x85: + case 0x2028: + case 0x2029: + return -next != ESC_v; + default: + return -next == ESC_v; + } + + /* When PCRE_UCP is set, these values get generated for \d etc. Find + their substitutions and process them. The result will always be either + -ESC_p or -ESC_P. Then fall through to process those values. */ + +#ifdef SUPPORT_UCP + case ESC_du: + case ESC_DU: + case ESC_wu: + case ESC_WU: + case ESC_su: + case ESC_SU: + { + int temperrorcode = 0; + ptr = substitutes[-next - ESC_DU]; + next = check_escape(&ptr, &temperrorcode, 0, options, FALSE); + if (temperrorcode != 0) return FALSE; + ptr++; /* For compatibility */ + } + /* Fall through */ + + case ESC_p: + case ESC_P: + { + int ptype, pdata, errorcodeptr; + BOOL negated; + + ptr--; /* Make ptr point at the p or P */ + ptype = get_ucp(&ptr, &negated, &pdata, &errorcodeptr); + if (ptype < 0) return FALSE; + ptr++; /* Point past the final curly ket */ + + /* If the property item is optional, we have to give up. (When generated + from \d etc by PCRE_UCP, this test will have been applied much earlier, + to the original \d etc. At this point, ptr will point to a zero byte. */ + + if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK || + STRNCMP_UC_C8(ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0) + return FALSE; + + /* Do the property check. */ + + return check_char_prop(c, ptype, pdata, (next == -ESC_P) != negated); + } +#endif + + default: + return FALSE; + } + + /* In principle, support for Unicode properties should be integrated here as + well. It means re-organizing the above code so as to get hold of the property + values before switching on the op-code. However, I wonder how many patterns + combine ASCII \d etc with Unicode properties? (Note that if PCRE_UCP is set, + these op-codes are never generated.) */ + + case OP_DIGIT: + return next == -ESC_D || next == -ESC_s || next == -ESC_W || + next == -ESC_h || next == -ESC_v || next == -ESC_R; + + case OP_NOT_DIGIT: + return next == -ESC_d; + + case OP_WHITESPACE: + return next == -ESC_S || next == -ESC_d || next == -ESC_w || next == -ESC_R; + + case OP_NOT_WHITESPACE: + return next == -ESC_s || next == -ESC_h || next == -ESC_v; + + case OP_HSPACE: + return next == -ESC_S || next == -ESC_H || next == -ESC_d || + next == -ESC_w || next == -ESC_v || next == -ESC_R; + + case OP_NOT_HSPACE: + return next == -ESC_h; + + /* Can't have \S in here because VT matches \S (Perl anomaly) */ + case OP_ANYNL: + case OP_VSPACE: + return next == -ESC_V || next == -ESC_d || next == -ESC_w; + + case OP_NOT_VSPACE: + return next == -ESC_v || next == -ESC_R; + + case OP_WORDCHAR: + return next == -ESC_W || next == -ESC_s || next == -ESC_h || + next == -ESC_v || next == -ESC_R; + + case OP_NOT_WORDCHAR: + return next == -ESC_w || next == -ESC_d; + + default: + return FALSE; + } + +/* Control does not reach here */ +} + + + +/************************************************* +* Compile one branch * +*************************************************/ + +/* Scan the pattern, compiling it into the a vector. If the options are +changed during the branch, the pointer is used to change the external options +bits. This function is used during the pre-compile phase when we are trying +to find out the amount of memory needed, as well as during the real compile +phase. The value of lengthptr distinguishes the two phases. + +Arguments: + optionsptr pointer to the option bits + codeptr points to the pointer to the current code point + ptrptr points to the current pattern pointer + errorcodeptr points to error code variable + firstcharptr set to initial literal character, or < 0 (REQ_UNSET, REQ_NONE) + reqcharptr set to the last literal character required, else < 0 + bcptr points to current branch chain + cond_depth conditional nesting depth + cd contains pointers to tables etc. + lengthptr NULL during the real compile phase + points to length accumulator during pre-compile phase + +Returns: TRUE on success + FALSE, with *errorcodeptr set non-zero on error +*/ + +static BOOL +compile_branch(int *optionsptr, pcre_uchar **codeptr, + const pcre_uchar **ptrptr, int *errorcodeptr, pcre_int32 *firstcharptr, + pcre_int32 *reqcharptr, branch_chain *bcptr, int cond_depth, + compile_data *cd, int *lengthptr) +{ +int repeat_type, op_type; +int repeat_min = 0, repeat_max = 0; /* To please picky compilers */ +int bravalue = 0; +int greedy_default, greedy_non_default; +pcre_int32 firstchar, reqchar; +pcre_int32 zeroreqchar, zerofirstchar; +pcre_int32 req_caseopt, reqvary, tempreqvary; +int options = *optionsptr; /* May change dynamically */ +int after_manual_callout = 0; +int length_prevgroup = 0; +register int c; +register pcre_uchar *code = *codeptr; +pcre_uchar *last_code = code; +pcre_uchar *orig_code = code; +pcre_uchar *tempcode; +BOOL inescq = FALSE; +BOOL groupsetfirstchar = FALSE; +const pcre_uchar *ptr = *ptrptr; +const pcre_uchar *tempptr; +const pcre_uchar *nestptr = NULL; +pcre_uchar *previous = NULL; +pcre_uchar *previous_callout = NULL; +pcre_uchar *save_hwm = NULL; +pcre_uint8 classbits[32]; + +/* We can fish out the UTF-8 setting once and for all into a BOOL, but we +must not do this for other options (e.g. PCRE_EXTENDED) because they may change +dynamically as we process the pattern. */ + +#ifdef SUPPORT_UTF +/* PCRE_UTF16 has the same value as PCRE_UTF8. */ +BOOL utf = (options & PCRE_UTF8) != 0; +pcre_uchar utf_chars[6]; +#else +BOOL utf = FALSE; +#endif + +/* Helper variables for OP_XCLASS opcode (for characters > 255). */ + +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 +BOOL xclass; +pcre_uchar *class_uchardata; +pcre_uchar *class_uchardata_base; +#endif + +#ifdef PCRE_DEBUG +if (lengthptr != NULL) DPRINTF((">> start branch\n")); +#endif + +/* Set up the default and non-default settings for greediness */ + +greedy_default = ((options & PCRE_UNGREEDY) != 0); +greedy_non_default = greedy_default ^ 1; + +/* Initialize no first byte, no required byte. REQ_UNSET means "no char +matching encountered yet". It gets changed to REQ_NONE if we hit something that +matches a non-fixed char first char; reqchar just remains unset if we never +find one. + +When we hit a repeat whose minimum is zero, we may have to adjust these values +to take the zero repeat into account. This is implemented by setting them to +zerofirstbyte and zeroreqchar when such a repeat is encountered. The individual +item types that can be repeated set these backoff variables appropriately. */ + +firstchar = reqchar = zerofirstchar = zeroreqchar = REQ_UNSET; + +/* The variable req_caseopt contains either the REQ_CASELESS value +or zero, according to the current setting of the caseless flag. The +REQ_CASELESS leaves the lower 28 bit empty. It is added into the +firstchar or reqchar variables to record the case status of the +value. This is used only for ASCII characters. */ + +req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS:0; + +/* Switch on next character until the end of the branch */ + +for (;; ptr++) + { + BOOL negate_class; + BOOL should_flip_negation; + BOOL possessive_quantifier; + BOOL is_quantifier; + BOOL is_recurse; + BOOL reset_bracount; + int class_has_8bitchar; + int class_single_char; + int newoptions; + int recno; + int refsign; + int skipbytes; + int subreqchar; + int subfirstchar; + int terminator; + int mclength; + int tempbracount; + pcre_uchar mcbuffer[8]; + + /* Get next character in the pattern */ + + c = *ptr; + + /* If we are at the end of a nested substitution, revert to the outer level + string. Nesting only happens one level deep. */ + + if (c == 0 && nestptr != NULL) + { + ptr = nestptr; + nestptr = NULL; + c = *ptr; + } + + /* If we are in the pre-compile phase, accumulate the length used for the + previous cycle of this loop. */ + + if (lengthptr != NULL) + { +#ifdef PCRE_DEBUG + if (code > cd->hwm) cd->hwm = code; /* High water info */ +#endif + if (code > cd->start_workspace + cd->workspace_size - + WORK_SIZE_SAFETY_MARGIN) /* Check for overrun */ + { + *errorcodeptr = ERR52; + goto FAILED; + } + + /* There is at least one situation where code goes backwards: this is the + case of a zero quantifier after a class (e.g. [ab]{0}). At compile time, + the class is simply eliminated. However, it is created first, so we have to + allow memory for it. Therefore, don't ever reduce the length at this point. + */ + + if (code < last_code) code = last_code; + + /* Paranoid check for integer overflow */ + + if (OFLOW_MAX - *lengthptr < code - last_code) + { + *errorcodeptr = ERR20; + goto FAILED; + } + + *lengthptr += (int)(code - last_code); + DPRINTF(("length=%d added %d c=%c (0x%x)\n", *lengthptr, + (int)(code - last_code), c, c)); + + /* If "previous" is set and it is not at the start of the work space, move + it back to there, in order to avoid filling up the work space. Otherwise, + if "previous" is NULL, reset the current code pointer to the start. */ + + if (previous != NULL) + { + if (previous > orig_code) + { + memmove(orig_code, previous, IN_UCHARS(code - previous)); + code -= previous - orig_code; + previous = orig_code; + } + } + else code = orig_code; + + /* Remember where this code item starts so we can pick up the length + next time round. */ + + last_code = code; + } + + /* In the real compile phase, just check the workspace used by the forward + reference list. */ + + else if (cd->hwm > cd->start_workspace + cd->workspace_size - + WORK_SIZE_SAFETY_MARGIN) + { + *errorcodeptr = ERR52; + goto FAILED; + } + + /* If in \Q...\E, check for the end; if not, we have a literal */ + + if (inescq && c != 0) + { + if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E) + { + inescq = FALSE; + ptr++; + continue; + } + else + { + if (previous_callout != NULL) + { + if (lengthptr == NULL) /* Don't attempt in pre-compile phase */ + complete_callout(previous_callout, ptr, cd); + previous_callout = NULL; + } + if ((options & PCRE_AUTO_CALLOUT) != 0) + { + previous_callout = code; + code = auto_callout(code, ptr, cd); + } + goto NORMAL_CHAR; + } + } + + /* Fill in length of a previous callout, except when the next thing is + a quantifier. */ + + is_quantifier = + c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK || + (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1)); + + if (!is_quantifier && previous_callout != NULL && + after_manual_callout-- <= 0) + { + if (lengthptr == NULL) /* Don't attempt in pre-compile phase */ + complete_callout(previous_callout, ptr, cd); + previous_callout = NULL; + } + + /* In extended mode, skip white space and comments. */ + + if ((options & PCRE_EXTENDED) != 0) + { + if (MAX_255(*ptr) && (cd->ctypes[c] & ctype_space) != 0) continue; + if (c == CHAR_NUMBER_SIGN) + { + ptr++; + while (*ptr != 0) + { + if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; } + ptr++; +#ifdef SUPPORT_UTF + if (utf) FORWARDCHAR(ptr); +#endif + } + if (*ptr != 0) continue; + + /* Else fall through to handle end of string */ + c = 0; + } + } + + /* No auto callout for quantifiers. */ + + if ((options & PCRE_AUTO_CALLOUT) != 0 && !is_quantifier) + { + previous_callout = code; + code = auto_callout(code, ptr, cd); + } + + switch(c) + { + /* ===================================================================*/ + case 0: /* The branch terminates at string end */ + case CHAR_VERTICAL_LINE: /* or | or ) */ + case CHAR_RIGHT_PARENTHESIS: + *firstcharptr = firstchar; + *reqcharptr = reqchar; + *codeptr = code; + *ptrptr = ptr; + if (lengthptr != NULL) + { + if (OFLOW_MAX - *lengthptr < code - last_code) + { + *errorcodeptr = ERR20; + goto FAILED; + } + *lengthptr += (int)(code - last_code); /* To include callout length */ + DPRINTF((">> end branch\n")); + } + return TRUE; + + + /* ===================================================================*/ + /* Handle single-character metacharacters. In multiline mode, ^ disables + the setting of any following char as a first character. */ + + case CHAR_CIRCUMFLEX_ACCENT: + previous = NULL; + if ((options & PCRE_MULTILINE) != 0) + { + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + *code++ = OP_CIRCM; + } + else *code++ = OP_CIRC; + break; + + case CHAR_DOLLAR_SIGN: + previous = NULL; + *code++ = ((options & PCRE_MULTILINE) != 0)? OP_DOLLM : OP_DOLL; + break; + + /* There can never be a first char if '.' is first, whatever happens about + repeats. The value of reqchar doesn't change either. */ + + case CHAR_DOT: + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + zerofirstchar = firstchar; + zeroreqchar = reqchar; + previous = code; + *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY; + break; + + + /* ===================================================================*/ + /* Character classes. If the included characters are all < 256, we build a + 32-byte bitmap of the permitted characters, except in the special case + where there is only one such character. For negated classes, we build the + map as usual, then invert it at the end. However, we use a different opcode + so that data characters > 255 can be handled correctly. + + If the class contains characters outside the 0-255 range, a different + opcode is compiled. It may optionally have a bit map for characters < 256, + but those above are are explicitly listed afterwards. A flag byte tells + whether the bitmap is present, and whether this is a negated class or not. + + In JavaScript compatibility mode, an isolated ']' causes an error. In + default (Perl) mode, it is treated as a data character. */ + + case CHAR_RIGHT_SQUARE_BRACKET: + if ((cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0) + { + *errorcodeptr = ERR64; + goto FAILED; + } + goto NORMAL_CHAR; + + case CHAR_LEFT_SQUARE_BRACKET: + previous = code; + + /* PCRE supports POSIX class stuff inside a class. Perl gives an error if + they are encountered at the top level, so we'll do that too. */ + + if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || + ptr[1] == CHAR_EQUALS_SIGN) && + check_posix_syntax(ptr, &tempptr)) + { + *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR13 : ERR31; + goto FAILED; + } + + /* If the first character is '^', set the negation flag and skip it. Also, + if the first few characters (either before or after ^) are \Q\E or \E we + skip them too. This makes for compatibility with Perl. */ + + negate_class = FALSE; + for (;;) + { + c = *(++ptr); + if (c == CHAR_BACKSLASH) + { + if (ptr[1] == CHAR_E) + ptr++; + else if (STRNCMP_UC_C8(ptr + 1, STR_Q STR_BACKSLASH STR_E, 3) == 0) + ptr += 3; + else + break; + } + else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT) + negate_class = TRUE; + else break; + } + + /* Empty classes are allowed in JavaScript compatibility mode. Otherwise, + an initial ']' is taken as a data character -- the code below handles + that. In JS mode, [] must always fail, so generate OP_FAIL, whereas + [^] must match any character, so generate OP_ALLANY. */ + + if (c == CHAR_RIGHT_SQUARE_BRACKET && + (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0) + { + *code++ = negate_class? OP_ALLANY : OP_FAIL; + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + zerofirstchar = firstchar; + break; + } + + /* If a class contains a negative special such as \S, we need to flip the + negation flag at the end, so that support for characters > 255 works + correctly (they are all included in the class). */ + + should_flip_negation = FALSE; + + /* For optimization purposes, we track some properties of the class. + class_has_8bitchar will be non-zero, if the class contains at least one + < 256 character. class_single_char will be 1 if the class contains only + a single character. */ + + class_has_8bitchar = 0; + class_single_char = 0; + + /* Initialize the 32-char bit map to all zeros. We build the map in a + temporary bit of memory, in case the class contains only 1 character (less + than 256), because in that case the compiled code doesn't use the bit map. + */ + + memset(classbits, 0, 32 * sizeof(pcre_uint8)); + +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + xclass = FALSE; /* No chars >= 256 */ + class_uchardata = code + LINK_SIZE + 2; /* For UTF-8 items */ + class_uchardata_base = class_uchardata; /* For resetting in pass 1 */ +#endif + + /* Process characters until ] is reached. By writing this as a "do" it + means that an initial ] is taken as a data character. At the start of the + loop, c contains the first byte of the character. */ + + if (c != 0) do + { + const pcre_uchar *oldptr; + +#ifdef SUPPORT_UTF + if (utf && HAS_EXTRALEN(c)) + { /* Braces are required because the */ + GETCHARLEN(c, ptr, ptr); /* macro generates multiple statements */ + } +#endif + +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + /* In the pre-compile phase, accumulate the length of any extra + data and reset the pointer. This is so that very large classes that + contain a zillion > 255 characters no longer overwrite the work space + (which is on the stack). */ + + if (lengthptr != NULL) + { + *lengthptr += class_uchardata - class_uchardata_base; + class_uchardata = class_uchardata_base; + } +#endif + + /* Inside \Q...\E everything is literal except \E */ + + if (inescq) + { + if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E) /* If we are at \E */ + { + inescq = FALSE; /* Reset literal state */ + ptr++; /* Skip the 'E' */ + continue; /* Carry on with next */ + } + goto CHECK_RANGE; /* Could be range if \E follows */ + } + + /* Handle POSIX class names. Perl allows a negation extension of the + form [:^name:]. A square bracket that doesn't match the syntax is + treated as a literal. We also recognize the POSIX constructions + [.ch.] and [=ch=] ("collating elements") and fault them, as Perl + 5.6 and 5.8 do. */ + + if (c == CHAR_LEFT_SQUARE_BRACKET && + (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || + ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr)) + { + BOOL local_negate = FALSE; + int posix_class, taboffset, tabopt; + register const pcre_uint8 *cbits = cd->cbits; + pcre_uint8 pbits[32]; + + if (ptr[1] != CHAR_COLON) + { + *errorcodeptr = ERR31; + goto FAILED; + } + + ptr += 2; + if (*ptr == CHAR_CIRCUMFLEX_ACCENT) + { + local_negate = TRUE; + should_flip_negation = TRUE; /* Note negative special */ + ptr++; + } + + posix_class = check_posix_name(ptr, (int)(tempptr - ptr)); + if (posix_class < 0) + { + *errorcodeptr = ERR30; + goto FAILED; + } + + /* If matching is caseless, upper and lower are converted to + alpha. This relies on the fact that the class table starts with + alpha, lower, upper as the first 3 entries. */ + + if ((options & PCRE_CASELESS) != 0 && posix_class <= 2) + posix_class = 0; + + /* When PCRE_UCP is set, some of the POSIX classes are converted to + different escape sequences that use Unicode properties. */ + +#ifdef SUPPORT_UCP + if ((options & PCRE_UCP) != 0) + { + int pc = posix_class + ((local_negate)? POSIX_SUBSIZE/2 : 0); + if (posix_substitutes[pc] != NULL) + { + nestptr = tempptr + 1; + ptr = posix_substitutes[pc] - 1; + continue; + } + } +#endif + /* In the non-UCP case, we build the bit map for the POSIX class in a + chunk of local store because we may be adding and subtracting from it, + and we don't want to subtract bits that may be in the main map already. + At the end we or the result into the bit map that is being built. */ + + posix_class *= 3; + + /* Copy in the first table (always present) */ + + memcpy(pbits, cbits + posix_class_maps[posix_class], + 32 * sizeof(pcre_uint8)); + + /* If there is a second table, add or remove it as required. */ + + taboffset = posix_class_maps[posix_class + 1]; + tabopt = posix_class_maps[posix_class + 2]; + + if (taboffset >= 0) + { + if (tabopt >= 0) + for (c = 0; c < 32; c++) pbits[c] |= cbits[c + taboffset]; + else + for (c = 0; c < 32; c++) pbits[c] &= ~cbits[c + taboffset]; + } + + /* Not see if we need to remove any special characters. An option + value of 1 removes vertical space and 2 removes underscore. */ + + if (tabopt < 0) tabopt = -tabopt; + if (tabopt == 1) pbits[1] &= ~0x3c; + else if (tabopt == 2) pbits[11] &= 0x7f; + + /* Add the POSIX table or its complement into the main table that is + being built and we are done. */ + + if (local_negate) + for (c = 0; c < 32; c++) classbits[c] |= ~pbits[c]; + else + for (c = 0; c < 32; c++) classbits[c] |= pbits[c]; + + ptr = tempptr + 1; + /* Every class contains at least one < 256 characters. */ + class_has_8bitchar = 1; + /* Every class contains at least two characters. */ + class_single_char = 2; + continue; /* End of POSIX syntax handling */ + } + + /* Backslash may introduce a single character, or it may introduce one + of the specials, which just set a flag. The sequence \b is a special + case. Inside a class (and only there) it is treated as backspace. We + assume that other escapes have more than one character in them, so + speculatively set both class_has_8bitchar and class_single_char bigger + than one. Unrecognized escapes fall through and are either treated + as literal characters (by default), or are faulted if + PCRE_EXTRA is set. */ + + if (c == CHAR_BACKSLASH) + { + c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE); + if (*errorcodeptr != 0) goto FAILED; + + if (-c == ESC_b) c = CHAR_BS; /* \b is backspace in a class */ + else if (-c == ESC_N) /* \N is not supported in a class */ + { + *errorcodeptr = ERR71; + goto FAILED; + } + else if (-c == ESC_Q) /* Handle start of quoted string */ + { + if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E) + { + ptr += 2; /* avoid empty string */ + } + else inescq = TRUE; + continue; + } + else if (-c == ESC_E) continue; /* Ignore orphan \E */ + + if (c < 0) + { + register const pcre_uint8 *cbits = cd->cbits; + /* Every class contains at least two < 256 characters. */ + class_has_8bitchar++; + /* Every class contains at least two characters. */ + class_single_char += 2; + + switch (-c) + { +#ifdef SUPPORT_UCP + case ESC_du: /* These are the values given for \d etc */ + case ESC_DU: /* when PCRE_UCP is set. We replace the */ + case ESC_wu: /* escape sequence with an appropriate \p */ + case ESC_WU: /* or \P to test Unicode properties instead */ + case ESC_su: /* of the default ASCII testing. */ + case ESC_SU: + nestptr = ptr; + ptr = substitutes[-c - ESC_DU] - 1; /* Just before substitute */ + class_has_8bitchar--; /* Undo! */ + continue; +#endif + case ESC_d: + for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit]; + continue; + + case ESC_D: + should_flip_negation = TRUE; + for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit]; + continue; + + case ESC_w: + for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_word]; + continue; + + case ESC_W: + should_flip_negation = TRUE; + for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word]; + continue; + + /* Perl 5.004 onwards omits VT from \s, but we must preserve it + if it was previously set by something earlier in the character + class. */ + + case ESC_s: + classbits[0] |= cbits[cbit_space]; + classbits[1] |= cbits[cbit_space+1] & ~0x08; + for (c = 2; c < 32; c++) classbits[c] |= cbits[c+cbit_space]; + continue; + + case ESC_S: + should_flip_negation = TRUE; + for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space]; + classbits[1] |= 0x08; /* Perl 5.004 onwards omits VT from \s */ + continue; + + case ESC_h: + SETBIT(classbits, 0x09); /* VT */ + SETBIT(classbits, 0x20); /* SPACE */ + SETBIT(classbits, 0xa0); /* NSBP */ +#ifndef COMPILE_PCRE8 + xclass = TRUE; + *class_uchardata++ = XCL_SINGLE; + *class_uchardata++ = 0x1680; + *class_uchardata++ = XCL_SINGLE; + *class_uchardata++ = 0x180e; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x2000; + *class_uchardata++ = 0x200a; + *class_uchardata++ = XCL_SINGLE; + *class_uchardata++ = 0x202f; + *class_uchardata++ = XCL_SINGLE; + *class_uchardata++ = 0x205f; + *class_uchardata++ = XCL_SINGLE; + *class_uchardata++ = 0x3000; +#elif defined SUPPORT_UTF + if (utf) + { + xclass = TRUE; + *class_uchardata++ = XCL_SINGLE; + class_uchardata += PRIV(ord2utf)(0x1680, class_uchardata); + *class_uchardata++ = XCL_SINGLE; + class_uchardata += PRIV(ord2utf)(0x180e, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x2000, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x200a, class_uchardata); + *class_uchardata++ = XCL_SINGLE; + class_uchardata += PRIV(ord2utf)(0x202f, class_uchardata); + *class_uchardata++ = XCL_SINGLE; + class_uchardata += PRIV(ord2utf)(0x205f, class_uchardata); + *class_uchardata++ = XCL_SINGLE; + class_uchardata += PRIV(ord2utf)(0x3000, class_uchardata); + } +#endif + continue; + + case ESC_H: + for (c = 0; c < 32; c++) + { + int x = 0xff; + switch (c) + { + case 0x09/8: x ^= 1 << (0x09%8); break; + case 0x20/8: x ^= 1 << (0x20%8); break; + case 0xa0/8: x ^= 1 << (0xa0%8); break; + default: break; + } + classbits[c] |= x; + } +#ifndef COMPILE_PCRE8 + xclass = TRUE; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x0100; + *class_uchardata++ = 0x167f; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x1681; + *class_uchardata++ = 0x180d; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x180f; + *class_uchardata++ = 0x1fff; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x200b; + *class_uchardata++ = 0x202e; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x2030; + *class_uchardata++ = 0x205e; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x2060; + *class_uchardata++ = 0x2fff; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x3001; +#ifdef SUPPORT_UTF + if (utf) + class_uchardata += PRIV(ord2utf)(0x10ffff, class_uchardata); + else +#endif + *class_uchardata++ = 0xffff; +#elif defined SUPPORT_UTF + if (utf) + { + xclass = TRUE; + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x0100, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x167f, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x1681, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x180d, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x180f, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x1fff, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x200b, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x202e, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x2030, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x205e, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x2060, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x2fff, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x3001, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x10ffff, class_uchardata); + } +#endif + continue; + + case ESC_v: + SETBIT(classbits, 0x0a); /* LF */ + SETBIT(classbits, 0x0b); /* VT */ + SETBIT(classbits, 0x0c); /* FF */ + SETBIT(classbits, 0x0d); /* CR */ + SETBIT(classbits, 0x85); /* NEL */ +#ifndef COMPILE_PCRE8 + xclass = TRUE; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x2028; + *class_uchardata++ = 0x2029; +#elif defined SUPPORT_UTF + if (utf) + { + xclass = TRUE; + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x2028, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x2029, class_uchardata); + } +#endif + continue; + + case ESC_V: + for (c = 0; c < 32; c++) + { + int x = 0xff; + switch (c) + { + case 0x0a/8: x ^= 1 << (0x0a%8); + x ^= 1 << (0x0b%8); + x ^= 1 << (0x0c%8); + x ^= 1 << (0x0d%8); + break; + case 0x85/8: x ^= 1 << (0x85%8); break; + default: break; + } + classbits[c] |= x; + } + +#ifndef COMPILE_PCRE8 + xclass = TRUE; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x0100; + *class_uchardata++ = 0x2027; + *class_uchardata++ = XCL_RANGE; + *class_uchardata++ = 0x202a; +#ifdef SUPPORT_UTF + if (utf) + class_uchardata += PRIV(ord2utf)(0x10ffff, class_uchardata); + else +#endif + *class_uchardata++ = 0xffff; +#elif defined SUPPORT_UTF + if (utf) + { + xclass = TRUE; + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x0100, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x2027, class_uchardata); + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(0x202a, class_uchardata); + class_uchardata += PRIV(ord2utf)(0x10ffff, class_uchardata); + } +#endif + continue; + +#ifdef SUPPORT_UCP + case ESC_p: + case ESC_P: + { + BOOL negated; + int pdata; + int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr); + if (ptype < 0) goto FAILED; + xclass = TRUE; + *class_uchardata++ = ((-c == ESC_p) != negated)? + XCL_PROP : XCL_NOTPROP; + *class_uchardata++ = ptype; + *class_uchardata++ = pdata; + class_has_8bitchar--; /* Undo! */ + continue; + } +#endif + /* Unrecognized escapes are faulted if PCRE is running in its + strict mode. By default, for compatibility with Perl, they are + treated as literals. */ + + default: + if ((options & PCRE_EXTRA) != 0) + { + *errorcodeptr = ERR7; + goto FAILED; + } + class_has_8bitchar--; /* Undo the speculative increase. */ + class_single_char -= 2; /* Undo the speculative increase. */ + c = *ptr; /* Get the final character and fall through */ + break; + } + } + + /* Fall through if we have a single character (c >= 0). This may be + greater than 256. */ + + } /* End of backslash handling */ + + /* A single character may be followed by '-' to form a range. However, + Perl does not permit ']' to be the end of the range. A '-' character + at the end is treated as a literal. Perl ignores orphaned \E sequences + entirely. The code for handling \Q and \E is messy. */ + + CHECK_RANGE: + while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E) + { + inescq = FALSE; + ptr += 2; + } + + oldptr = ptr; + + /* Remember \r or \n */ + + if (c == CHAR_CR || c == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF; + + /* Check for range */ + + if (!inescq && ptr[1] == CHAR_MINUS) + { + int d; + ptr += 2; + while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2; + + /* If we hit \Q (not followed by \E) at this point, go into escaped + mode. */ + + while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q) + { + ptr += 2; + if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) + { ptr += 2; continue; } + inescq = TRUE; + break; + } + + if (*ptr == 0 || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET)) + { + ptr = oldptr; + goto LONE_SINGLE_CHARACTER; + } + +#ifdef SUPPORT_UTF + if (utf) + { /* Braces are required because the */ + GETCHARLEN(d, ptr, ptr); /* macro generates multiple statements */ + } + else +#endif + d = *ptr; /* Not UTF-8 mode */ + + /* The second part of a range can be a single-character escape, but + not any of the other escapes. Perl 5.6 treats a hyphen as a literal + in such circumstances. */ + + if (!inescq && d == CHAR_BACKSLASH) + { + d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE); + if (*errorcodeptr != 0) goto FAILED; + + /* \b is backspace; any other special means the '-' was literal */ + + if (d < 0) + { + if (d == -ESC_b) d = CHAR_BS; else + { + ptr = oldptr; + goto LONE_SINGLE_CHARACTER; /* A few lines below */ + } + } + } + + /* Check that the two values are in the correct order. Optimize + one-character ranges */ + + if (d < c) + { + *errorcodeptr = ERR8; + goto FAILED; + } + + if (d == c) goto LONE_SINGLE_CHARACTER; /* A few lines below */ + + /* Remember \r or \n */ + + if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF; + + /* Since we found a character range, single character optimizations + cannot be done anymore. */ + class_single_char = 2; + + /* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless + matching, we have to use an XCLASS with extra data items. Caseless + matching for characters > 127 is available only if UCP support is + available. */ + +#if defined SUPPORT_UTF && !(defined COMPILE_PCRE8) + if ((d > 255) || (utf && ((options & PCRE_CASELESS) != 0 && d > 127))) +#elif defined SUPPORT_UTF + if (utf && (d > 255 || ((options & PCRE_CASELESS) != 0 && d > 127))) +#elif !(defined COMPILE_PCRE8) + if (d > 255) +#endif +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + { + xclass = TRUE; + + /* With UCP support, we can find the other case equivalents of + the relevant characters. There may be several ranges. Optimize how + they fit with the basic range. */ + +#ifdef SUPPORT_UCP +#ifndef COMPILE_PCRE8 + if (utf && (options & PCRE_CASELESS) != 0) +#else + if ((options & PCRE_CASELESS) != 0) +#endif + { + unsigned int occ, ocd; + unsigned int cc = c; + unsigned int origd = d; + while (get_othercase_range(&cc, origd, &occ, &ocd)) + { + if (occ >= (unsigned int)c && + ocd <= (unsigned int)d) + continue; /* Skip embedded ranges */ + + if (occ < (unsigned int)c && + ocd >= (unsigned int)c - 1) /* Extend the basic range */ + { /* if there is overlap, */ + c = occ; /* noting that if occ < c */ + continue; /* we can't have ocd > d */ + } /* because a subrange is */ + if (ocd > (unsigned int)d && + occ <= (unsigned int)d + 1) /* always shorter than */ + { /* the basic range. */ + d = ocd; + continue; + } + + if (occ == ocd) + { + *class_uchardata++ = XCL_SINGLE; + } + else + { + *class_uchardata++ = XCL_RANGE; + class_uchardata += PRIV(ord2utf)(occ, class_uchardata); + } + class_uchardata += PRIV(ord2utf)(ocd, class_uchardata); + } + } +#endif /* SUPPORT_UCP */ + + /* Now record the original range, possibly modified for UCP caseless + overlapping ranges. */ + + *class_uchardata++ = XCL_RANGE; +#ifdef SUPPORT_UTF +#ifndef COMPILE_PCRE8 + if (utf) + { + class_uchardata += PRIV(ord2utf)(c, class_uchardata); + class_uchardata += PRIV(ord2utf)(d, class_uchardata); + } + else + { + *class_uchardata++ = c; + *class_uchardata++ = d; + } +#else + class_uchardata += PRIV(ord2utf)(c, class_uchardata); + class_uchardata += PRIV(ord2utf)(d, class_uchardata); +#endif +#else /* SUPPORT_UTF */ + *class_uchardata++ = c; + *class_uchardata++ = d; +#endif /* SUPPORT_UTF */ + + /* With UCP support, we are done. Without UCP support, there is no + caseless matching for UTF characters > 127; we can use the bit map + for the smaller ones. As for 16 bit characters without UTF, we + can still use */ + +#ifdef SUPPORT_UCP +#ifndef COMPILE_PCRE8 + if (utf) +#endif + continue; /* With next character in the class */ +#endif /* SUPPORT_UCP */ + +#if defined SUPPORT_UTF && !defined(SUPPORT_UCP) && !(defined COMPILE_PCRE8) + if (utf) + { + if ((options & PCRE_CASELESS) == 0 || c > 127) continue; + /* Adjust upper limit and fall through to set up the map */ + d = 127; + } + else + { + if (c > 255) continue; + /* Adjust upper limit and fall through to set up the map */ + d = 255; + } +#elif defined SUPPORT_UTF && !defined(SUPPORT_UCP) + if ((options & PCRE_CASELESS) == 0 || c > 127) continue; + /* Adjust upper limit and fall through to set up the map */ + d = 127; +#else + if (c > 255) continue; + /* Adjust upper limit and fall through to set up the map */ + d = 255; +#endif /* SUPPORT_UTF && !SUPPORT_UCP && !COMPILE_PCRE8 */ + } +#endif /* SUPPORT_UTF || !COMPILE_PCRE8 */ + + /* We use the bit map for 8 bit mode, or when the characters fall + partially or entirely to [0-255] ([0-127] for UCP) ranges. */ + + class_has_8bitchar = 1; + + /* We can save a bit of time by skipping this in the pre-compile. */ + + if (lengthptr == NULL) for (; c <= d; c++) + { + classbits[c/8] |= (1 << (c&7)); + if ((options & PCRE_CASELESS) != 0) + { + int uc = cd->fcc[c]; /* flip case */ + classbits[uc/8] |= (1 << (uc&7)); + } + } + + continue; /* Go get the next char in the class */ + } + + /* Handle a lone single character - we can get here for a normal + non-escape char, or after \ that introduces a single character or for an + apparent range that isn't. */ + + LONE_SINGLE_CHARACTER: + + /* Only the value of 1 matters for class_single_char. */ + if (class_single_char < 2) class_single_char++; + + /* If class_charcount is 1, we saw precisely one character. As long as + there were no negated characters >= 128 and there was no use of \p or \P, + in other words, no use of any XCLASS features, we can optimize. + + In UTF-8 mode, we can optimize the negative case only if there were no + characters >= 128 because OP_NOT and the related opcodes like OP_NOTSTAR + operate on single-bytes characters only. This is an historical hangover. + Maybe one day we can tidy these opcodes to handle multi-byte characters. + + The optimization throws away the bit map. We turn the item into a + 1-character OP_CHAR[I] if it's positive, or OP_NOT[I] if it's negative. + Note that OP_NOT[I] does not support multibyte characters. In the positive + case, it can cause firstchar to be set. Otherwise, there can be no first + char if this item is first, whatever repeat count may follow. In the case + of reqchar, save the previous value for reinstating. */ + +#ifdef SUPPORT_UTF + if (class_single_char == 1 && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET + && (!utf || !negate_class || c < (MAX_VALUE_FOR_SINGLE_CHAR + 1))) +#else + if (class_single_char == 1 && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) +#endif + { + ptr++; + zeroreqchar = reqchar; + + /* The OP_NOT[I] opcodes work on single characters only. */ + + if (negate_class) + { + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + zerofirstchar = firstchar; + *code++ = ((options & PCRE_CASELESS) != 0)? OP_NOTI: OP_NOT; + *code++ = c; + goto NOT_CHAR; + } + + /* For a single, positive character, get the value into mcbuffer, and + then we can handle this with the normal one-character code. */ + +#ifdef SUPPORT_UTF + if (utf && c > MAX_VALUE_FOR_SINGLE_CHAR) + mclength = PRIV(ord2utf)(c, mcbuffer); + else +#endif + { + mcbuffer[0] = c; + mclength = 1; + } + goto ONE_CHAR; + } /* End of 1-char optimization */ + + /* Handle a character that cannot go in the bit map. */ + +#if defined SUPPORT_UTF && !(defined COMPILE_PCRE8) + if ((c > 255) || (utf && ((options & PCRE_CASELESS) != 0 && c > 127))) +#elif defined SUPPORT_UTF + if (utf && (c > 255 || ((options & PCRE_CASELESS) != 0 && c > 127))) +#elif !(defined COMPILE_PCRE8) + if (c > 255) +#endif + +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + { + xclass = TRUE; + *class_uchardata++ = XCL_SINGLE; +#ifdef SUPPORT_UTF +#ifndef COMPILE_PCRE8 + /* In non 8 bit mode, we can get here even if we are not in UTF mode. */ + if (!utf) + *class_uchardata++ = c; + else +#endif + class_uchardata += PRIV(ord2utf)(c, class_uchardata); +#else /* SUPPORT_UTF */ + *class_uchardata++ = c; +#endif /* SUPPORT_UTF */ + +#ifdef SUPPORT_UCP +#ifdef COMPILE_PCRE8 + if ((options & PCRE_CASELESS) != 0) +#else + /* In non 8 bit mode, we can get here even if we are not in UTF mode. */ + if (utf && (options & PCRE_CASELESS) != 0) +#endif + { + unsigned int othercase; + if ((int)(othercase = UCD_OTHERCASE(c)) != c) + { + *class_uchardata++ = XCL_SINGLE; + class_uchardata += PRIV(ord2utf)(othercase, class_uchardata); + } + } +#endif /* SUPPORT_UCP */ + + } + else +#endif /* SUPPORT_UTF || COMPILE_PCRE16 */ + + /* Handle a single-byte character */ + { + class_has_8bitchar = 1; + classbits[c/8] |= (1 << (c&7)); + if ((options & PCRE_CASELESS) != 0) + { + c = cd->fcc[c]; /* flip case */ + classbits[c/8] |= (1 << (c&7)); + } + } + } + + /* Loop until ']' reached. This "while" is the end of the "do" far above. + If we are at the end of an internal nested string, revert to the outer + string. */ + + while (((c = *(++ptr)) != 0 || + (nestptr != NULL && + (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != 0)) && + (c != CHAR_RIGHT_SQUARE_BRACKET || inescq)); + + /* Check for missing terminating ']' */ + + if (c == 0) + { + *errorcodeptr = ERR6; + goto FAILED; + } + + /* If this is the first thing in the branch, there can be no first char + setting, whatever the repeat count. Any reqchar setting must remain + unchanged after any kind of repeat. */ + + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + zerofirstchar = firstchar; + zeroreqchar = reqchar; + + /* If there are characters with values > 255, we have to compile an + extended class, with its own opcode, unless there was a negated special + such as \S in the class, and PCRE_UCP is not set, because in that case all + characters > 255 are in the class, so any that were explicitly given as + well can be ignored. If (when there are explicit characters > 255 that must + be listed) there are no characters < 256, we can omit the bitmap in the + actual compiled code. */ + +#ifdef SUPPORT_UTF + if (xclass && (!should_flip_negation || (options & PCRE_UCP) != 0)) +#elif !defined COMPILE_PCRE8 + if (xclass && !should_flip_negation) +#endif +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + { + *class_uchardata++ = XCL_END; /* Marks the end of extra data */ + *code++ = OP_XCLASS; + code += LINK_SIZE; + *code = negate_class? XCL_NOT:0; + + /* If the map is required, move up the extra data to make room for it; + otherwise just move the code pointer to the end of the extra data. */ + + if (class_has_8bitchar > 0) + { + *code++ |= XCL_MAP; + memmove(code + (32 / sizeof(pcre_uchar)), code, + IN_UCHARS(class_uchardata - code)); + memcpy(code, classbits, 32); + code = class_uchardata + (32 / sizeof(pcre_uchar)); + } + else code = class_uchardata; + + /* Now fill in the complete length of the item */ + + PUT(previous, 1, (int)(code - previous)); + break; /* End of class handling */ + } +#endif + + /* If there are no characters > 255, or they are all to be included or + excluded, set the opcode to OP_CLASS or OP_NCLASS, depending on whether the + whole class was negated and whether there were negative specials such as \S + (non-UCP) in the class. Then copy the 32-byte map into the code vector, + negating it if necessary. */ + + *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS; + if (lengthptr == NULL) /* Save time in the pre-compile phase */ + { + if (negate_class) + for (c = 0; c < 32; c++) classbits[c] = ~classbits[c]; + memcpy(code, classbits, 32); + } + code += 32 / sizeof(pcre_uchar); + NOT_CHAR: + break; + + + /* ===================================================================*/ + /* Various kinds of repeat; '{' is not necessarily a quantifier, but this + has been tested above. */ + + case CHAR_LEFT_CURLY_BRACKET: + if (!is_quantifier) goto NORMAL_CHAR; + ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr); + if (*errorcodeptr != 0) goto FAILED; + goto REPEAT; + + case CHAR_ASTERISK: + repeat_min = 0; + repeat_max = -1; + goto REPEAT; + + case CHAR_PLUS: + repeat_min = 1; + repeat_max = -1; + goto REPEAT; + + case CHAR_QUESTION_MARK: + repeat_min = 0; + repeat_max = 1; + + REPEAT: + if (previous == NULL) + { + *errorcodeptr = ERR9; + goto FAILED; + } + + if (repeat_min == 0) + { + firstchar = zerofirstchar; /* Adjust for zero repeat */ + reqchar = zeroreqchar; /* Ditto */ + } + + /* Remember whether this is a variable length repeat */ + + reqvary = (repeat_min == repeat_max)? 0 : REQ_VARY; + + op_type = 0; /* Default single-char op codes */ + possessive_quantifier = FALSE; /* Default not possessive quantifier */ + + /* Save start of previous item, in case we have to move it up in order to + insert something before it. */ + + tempcode = previous; + + /* If the next character is '+', we have a possessive quantifier. This + implies greediness, whatever the setting of the PCRE_UNGREEDY option. + If the next character is '?' this is a minimizing repeat, by default, + but if PCRE_UNGREEDY is set, it works the other way round. We change the + repeat type to the non-default. */ + + if (ptr[1] == CHAR_PLUS) + { + repeat_type = 0; /* Force greedy */ + possessive_quantifier = TRUE; + ptr++; + } + else if (ptr[1] == CHAR_QUESTION_MARK) + { + repeat_type = greedy_non_default; + ptr++; + } + else repeat_type = greedy_default; + + /* If previous was a recursion call, wrap it in atomic brackets so that + previous becomes the atomic group. All recursions were so wrapped in the + past, but it no longer happens for non-repeated recursions. In fact, the + repeated ones could be re-implemented independently so as not to need this, + but for the moment we rely on the code for repeating groups. */ + + if (*previous == OP_RECURSE) + { + memmove(previous + 1 + LINK_SIZE, previous, IN_UCHARS(1 + LINK_SIZE)); + *previous = OP_ONCE; + PUT(previous, 1, 2 + 2*LINK_SIZE); + previous[2 + 2*LINK_SIZE] = OP_KET; + PUT(previous, 3 + 2*LINK_SIZE, 2 + 2*LINK_SIZE); + code += 2 + 2 * LINK_SIZE; + length_prevgroup = 3 + 3*LINK_SIZE; + + /* When actually compiling, we need to check whether this was a forward + reference, and if so, adjust the offset. */ + + if (lengthptr == NULL && cd->hwm >= cd->start_workspace + LINK_SIZE) + { + int offset = GET(cd->hwm, -LINK_SIZE); + if (offset == previous + 1 - cd->start_code) + PUT(cd->hwm, -LINK_SIZE, offset + 1 + LINK_SIZE); + } + } + + /* Now handle repetition for the different types of item. */ + + /* If previous was a character match, abolish the item and generate a + repeat item instead. If a char item has a minumum of more than one, ensure + that it is set in reqchar - it might not be if a sequence such as x{3} is + the first thing in a branch because the x will have gone into firstchar + instead. */ + + if (*previous == OP_CHAR || *previous == OP_CHARI) + { + op_type = (*previous == OP_CHAR)? 0 : OP_STARI - OP_STAR; + + /* Deal with UTF characters that take up more than one character. It's + easier to write this out separately than try to macrify it. Use c to + hold the length of the character in bytes, plus UTF_LENGTH to flag that + it's a length rather than a small character. */ + +#ifdef SUPPORT_UTF + if (utf && NOT_FIRSTCHAR(code[-1])) + { + pcre_uchar *lastchar = code - 1; + BACKCHAR(lastchar); + c = (int)(code - lastchar); /* Length of UTF-8 character */ + memcpy(utf_chars, lastchar, IN_UCHARS(c)); /* Save the char */ + c |= UTF_LENGTH; /* Flag c as a length */ + } + else +#endif /* SUPPORT_UTF */ + + /* Handle the case of a single charater - either with no UTF support, or + with UTF disabled, or for a single character UTF character. */ + { + c = code[-1]; + if (repeat_min > 1) reqchar = c | req_caseopt | cd->req_varyopt; + } + + /* If the repetition is unlimited, it pays to see if the next thing on + the line is something that cannot possibly match this character. If so, + automatically possessifying this item gains some performance in the case + where the match fails. */ + + if (!possessive_quantifier && + repeat_max < 0 && + check_auto_possessive(previous, utf, ptr + 1, options, cd)) + { + repeat_type = 0; /* Force greedy */ + possessive_quantifier = TRUE; + } + + goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */ + } + + /* If previous was a single negated character ([^a] or similar), we use + one of the special opcodes, replacing it. The code is shared with single- + character repeats by setting opt_type to add a suitable offset into + repeat_type. We can also test for auto-possessification. OP_NOT and OP_NOTI + are currently used only for single-byte chars. */ + + else if (*previous == OP_NOT || *previous == OP_NOTI) + { + op_type = ((*previous == OP_NOT)? OP_NOTSTAR : OP_NOTSTARI) - OP_STAR; + c = previous[1]; + if (!possessive_quantifier && + repeat_max < 0 && + check_auto_possessive(previous, utf, ptr + 1, options, cd)) + { + repeat_type = 0; /* Force greedy */ + possessive_quantifier = TRUE; + } + goto OUTPUT_SINGLE_REPEAT; + } + + /* If previous was a character type match (\d or similar), abolish it and + create a suitable repeat item. The code is shared with single-character + repeats by setting op_type to add a suitable offset into repeat_type. Note + the the Unicode property types will be present only when SUPPORT_UCP is + defined, but we don't wrap the little bits of code here because it just + makes it horribly messy. */ + + else if (*previous < OP_EODN) + { + pcre_uchar *oldcode; + int prop_type, prop_value; + op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */ + c = *previous; + + if (!possessive_quantifier && + repeat_max < 0 && + check_auto_possessive(previous, utf, ptr + 1, options, cd)) + { + repeat_type = 0; /* Force greedy */ + possessive_quantifier = TRUE; + } + + OUTPUT_SINGLE_REPEAT: + if (*previous == OP_PROP || *previous == OP_NOTPROP) + { + prop_type = previous[1]; + prop_value = previous[2]; + } + else prop_type = prop_value = -1; + + oldcode = code; + code = previous; /* Usually overwrite previous item */ + + /* If the maximum is zero then the minimum must also be zero; Perl allows + this case, so we do too - by simply omitting the item altogether. */ + + if (repeat_max == 0) goto END_REPEAT; + + /*--------------------------------------------------------------------*/ + /* This code is obsolete from release 8.00; the restriction was finally + removed: */ + + /* All real repeats make it impossible to handle partial matching (maybe + one day we will be able to remove this restriction). */ + + /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */ + /*--------------------------------------------------------------------*/ + + /* Combine the op_type with the repeat_type */ + + repeat_type += op_type; + + /* A minimum of zero is handled either as the special case * or ?, or as + an UPTO, with the maximum given. */ + + if (repeat_min == 0) + { + if (repeat_max == -1) *code++ = OP_STAR + repeat_type; + else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type; + else + { + *code++ = OP_UPTO + repeat_type; + PUT2INC(code, 0, repeat_max); + } + } + + /* A repeat minimum of 1 is optimized into some special cases. If the + maximum is unlimited, we use OP_PLUS. Otherwise, the original item is + left in place and, if the maximum is greater than 1, we use OP_UPTO with + one less than the maximum. */ + + else if (repeat_min == 1) + { + if (repeat_max == -1) + *code++ = OP_PLUS + repeat_type; + else + { + code = oldcode; /* leave previous item in place */ + if (repeat_max == 1) goto END_REPEAT; + *code++ = OP_UPTO + repeat_type; + PUT2INC(code, 0, repeat_max - 1); + } + } + + /* The case {n,n} is just an EXACT, while the general case {n,m} is + handled as an EXACT followed by an UPTO. */ + + else + { + *code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */ + PUT2INC(code, 0, repeat_min); + + /* If the maximum is unlimited, insert an OP_STAR. Before doing so, + we have to insert the character for the previous code. For a repeated + Unicode property match, there are two extra bytes that define the + required property. In UTF-8 mode, long characters have their length in + c, with the UTF_LENGTH bit as a flag. */ + + if (repeat_max < 0) + { +#ifdef SUPPORT_UTF + if (utf && (c & UTF_LENGTH) != 0) + { + memcpy(code, utf_chars, IN_UCHARS(c & 7)); + code += c & 7; + } + else +#endif + { + *code++ = c; + if (prop_type >= 0) + { + *code++ = prop_type; + *code++ = prop_value; + } + } + *code++ = OP_STAR + repeat_type; + } + + /* Else insert an UPTO if the max is greater than the min, again + preceded by the character, for the previously inserted code. If the + UPTO is just for 1 instance, we can use QUERY instead. */ + + else if (repeat_max != repeat_min) + { +#ifdef SUPPORT_UTF + if (utf && (c & UTF_LENGTH) != 0) + { + memcpy(code, utf_chars, IN_UCHARS(c & 7)); + code += c & 7; + } + else +#endif + *code++ = c; + if (prop_type >= 0) + { + *code++ = prop_type; + *code++ = prop_value; + } + repeat_max -= repeat_min; + + if (repeat_max == 1) + { + *code++ = OP_QUERY + repeat_type; + } + else + { + *code++ = OP_UPTO + repeat_type; + PUT2INC(code, 0, repeat_max); + } + } + } + + /* The character or character type itself comes last in all cases. */ + +#ifdef SUPPORT_UTF + if (utf && (c & UTF_LENGTH) != 0) + { + memcpy(code, utf_chars, IN_UCHARS(c & 7)); + code += c & 7; + } + else +#endif + *code++ = c; + + /* For a repeated Unicode property match, there are two extra bytes that + define the required property. */ + +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + *code++ = prop_type; + *code++ = prop_value; + } +#endif + } + + /* If previous was a character class or a back reference, we put the repeat + stuff after it, but just skip the item if the repeat was {0,0}. */ + + else if (*previous == OP_CLASS || + *previous == OP_NCLASS || +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + *previous == OP_XCLASS || +#endif + *previous == OP_REF || + *previous == OP_REFI) + { + if (repeat_max == 0) + { + code = previous; + goto END_REPEAT; + } + + /*--------------------------------------------------------------------*/ + /* This code is obsolete from release 8.00; the restriction was finally + removed: */ + + /* All real repeats make it impossible to handle partial matching (maybe + one day we will be able to remove this restriction). */ + + /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */ + /*--------------------------------------------------------------------*/ + + if (repeat_min == 0 && repeat_max == -1) + *code++ = OP_CRSTAR + repeat_type; + else if (repeat_min == 1 && repeat_max == -1) + *code++ = OP_CRPLUS + repeat_type; + else if (repeat_min == 0 && repeat_max == 1) + *code++ = OP_CRQUERY + repeat_type; + else + { + *code++ = OP_CRRANGE + repeat_type; + PUT2INC(code, 0, repeat_min); + if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */ + PUT2INC(code, 0, repeat_max); + } + } + + /* If previous was a bracket group, we may have to replicate it in certain + cases. Note that at this point we can encounter only the "basic" bracket + opcodes such as BRA and CBRA, as this is the place where they get converted + into the more special varieties such as BRAPOS and SBRA. A test for >= + OP_ASSERT and <= OP_COND includes ASSERT, ASSERT_NOT, ASSERTBACK, + ASSERTBACK_NOT, ONCE, BRA, CBRA, and COND. Originally, PCRE did not allow + repetition of assertions, but now it does, for Perl compatibility. */ + + else if (*previous >= OP_ASSERT && *previous <= OP_COND) + { + register int i; + int len = (int)(code - previous); + pcre_uchar *bralink = NULL; + pcre_uchar *brazeroptr = NULL; + + /* Repeating a DEFINE group is pointless, but Perl allows the syntax, so + we just ignore the repeat. */ + + if (*previous == OP_COND && previous[LINK_SIZE+1] == OP_DEF) + goto END_REPEAT; + + /* There is no sense in actually repeating assertions. The only potential + use of repetition is in cases when the assertion is optional. Therefore, + if the minimum is greater than zero, just ignore the repeat. If the + maximum is not not zero or one, set it to 1. */ + + if (*previous < OP_ONCE) /* Assertion */ + { + if (repeat_min > 0) goto END_REPEAT; + if (repeat_max < 0 || repeat_max > 1) repeat_max = 1; + } + + /* The case of a zero minimum is special because of the need to stick + OP_BRAZERO in front of it, and because the group appears once in the + data, whereas in other cases it appears the minimum number of times. For + this reason, it is simplest to treat this case separately, as otherwise + the code gets far too messy. There are several special subcases when the + minimum is zero. */ + + if (repeat_min == 0) + { + /* If the maximum is also zero, we used to just omit the group from the + output altogether, like this: + + ** if (repeat_max == 0) + ** { + ** code = previous; + ** goto END_REPEAT; + ** } + + However, that fails when a group or a subgroup within it is referenced + as a subroutine from elsewhere in the pattern, so now we stick in + OP_SKIPZERO in front of it so that it is skipped on execution. As we + don't have a list of which groups are referenced, we cannot do this + selectively. + + If the maximum is 1 or unlimited, we just have to stick in the BRAZERO + and do no more at this point. However, we do need to adjust any + OP_RECURSE calls inside the group that refer to the group itself or any + internal or forward referenced group, because the offset is from the + start of the whole regex. Temporarily terminate the pattern while doing + this. */ + + if (repeat_max <= 1) /* Covers 0, 1, and unlimited */ + { + *code = OP_END; + adjust_recurse(previous, 1, utf, cd, save_hwm); + memmove(previous + 1, previous, IN_UCHARS(len)); + code++; + if (repeat_max == 0) + { + *previous++ = OP_SKIPZERO; + goto END_REPEAT; + } + brazeroptr = previous; /* Save for possessive optimizing */ + *previous++ = OP_BRAZERO + repeat_type; + } + + /* If the maximum is greater than 1 and limited, we have to replicate + in a nested fashion, sticking OP_BRAZERO before each set of brackets. + The first one has to be handled carefully because it's the original + copy, which has to be moved up. The remainder can be handled by code + that is common with the non-zero minimum case below. We have to + adjust the value or repeat_max, since one less copy is required. Once + again, we may have to adjust any OP_RECURSE calls inside the group. */ + + else + { + int offset; + *code = OP_END; + adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm); + memmove(previous + 2 + LINK_SIZE, previous, IN_UCHARS(len)); + code += 2 + LINK_SIZE; + *previous++ = OP_BRAZERO + repeat_type; + *previous++ = OP_BRA; + + /* We chain together the bracket offset fields that have to be + filled in later when the ends of the brackets are reached. */ + + offset = (bralink == NULL)? 0 : (int)(previous - bralink); + bralink = previous; + PUTINC(previous, 0, offset); + } + + repeat_max--; + } + + /* If the minimum is greater than zero, replicate the group as many + times as necessary, and adjust the maximum to the number of subsequent + copies that we need. If we set a first char from the group, and didn't + set a required char, copy the latter from the former. If there are any + forward reference subroutine calls in the group, there will be entries on + the workspace list; replicate these with an appropriate increment. */ + + else + { + if (repeat_min > 1) + { + /* In the pre-compile phase, we don't actually do the replication. We + just adjust the length as if we had. Do some paranoid checks for + potential integer overflow. The INT64_OR_DOUBLE type is a 64-bit + integer type when available, otherwise double. */ + + if (lengthptr != NULL) + { + int delta = (repeat_min - 1)*length_prevgroup; + if ((INT64_OR_DOUBLE)(repeat_min - 1)* + (INT64_OR_DOUBLE)length_prevgroup > + (INT64_OR_DOUBLE)INT_MAX || + OFLOW_MAX - *lengthptr < delta) + { + *errorcodeptr = ERR20; + goto FAILED; + } + *lengthptr += delta; + } + + /* This is compiling for real. If there is a set first byte for + the group, and we have not yet set a "required byte", set it. Make + sure there is enough workspace for copying forward references before + doing the copy. */ + + else + { + if (groupsetfirstchar && reqchar < 0) reqchar = firstchar; + + for (i = 1; i < repeat_min; i++) + { + pcre_uchar *hc; + pcre_uchar *this_hwm = cd->hwm; + memcpy(code, previous, IN_UCHARS(len)); + + while (cd->hwm > cd->start_workspace + cd->workspace_size - + WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm)) + { + int save_offset = save_hwm - cd->start_workspace; + int this_offset = this_hwm - cd->start_workspace; + *errorcodeptr = expand_workspace(cd); + if (*errorcodeptr != 0) goto FAILED; + save_hwm = (pcre_uchar *)cd->start_workspace + save_offset; + this_hwm = (pcre_uchar *)cd->start_workspace + this_offset; + } + + for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE) + { + PUT(cd->hwm, 0, GET(hc, 0) + len); + cd->hwm += LINK_SIZE; + } + save_hwm = this_hwm; + code += len; + } + } + } + + if (repeat_max > 0) repeat_max -= repeat_min; + } + + /* This code is common to both the zero and non-zero minimum cases. If + the maximum is limited, it replicates the group in a nested fashion, + remembering the bracket starts on a stack. In the case of a zero minimum, + the first one was set up above. In all cases the repeat_max now specifies + the number of additional copies needed. Again, we must remember to + replicate entries on the forward reference list. */ + + if (repeat_max >= 0) + { + /* In the pre-compile phase, we don't actually do the replication. We + just adjust the length as if we had. For each repetition we must add 1 + to the length for BRAZERO and for all but the last repetition we must + add 2 + 2*LINKSIZE to allow for the nesting that occurs. Do some + paranoid checks to avoid integer overflow. The INT64_OR_DOUBLE type is + a 64-bit integer type when available, otherwise double. */ + + if (lengthptr != NULL && repeat_max > 0) + { + int delta = repeat_max * (length_prevgroup + 1 + 2 + 2*LINK_SIZE) - + 2 - 2*LINK_SIZE; /* Last one doesn't nest */ + if ((INT64_OR_DOUBLE)repeat_max * + (INT64_OR_DOUBLE)(length_prevgroup + 1 + 2 + 2*LINK_SIZE) + > (INT64_OR_DOUBLE)INT_MAX || + OFLOW_MAX - *lengthptr < delta) + { + *errorcodeptr = ERR20; + goto FAILED; + } + *lengthptr += delta; + } + + /* This is compiling for real */ + + else for (i = repeat_max - 1; i >= 0; i--) + { + pcre_uchar *hc; + pcre_uchar *this_hwm = cd->hwm; + + *code++ = OP_BRAZERO + repeat_type; + + /* All but the final copy start a new nesting, maintaining the + chain of brackets outstanding. */ + + if (i != 0) + { + int offset; + *code++ = OP_BRA; + offset = (bralink == NULL)? 0 : (int)(code - bralink); + bralink = code; + PUTINC(code, 0, offset); + } + + memcpy(code, previous, IN_UCHARS(len)); + + /* Ensure there is enough workspace for forward references before + copying them. */ + + while (cd->hwm > cd->start_workspace + cd->workspace_size - + WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm)) + { + int save_offset = save_hwm - cd->start_workspace; + int this_offset = this_hwm - cd->start_workspace; + *errorcodeptr = expand_workspace(cd); + if (*errorcodeptr != 0) goto FAILED; + save_hwm = (pcre_uchar *)cd->start_workspace + save_offset; + this_hwm = (pcre_uchar *)cd->start_workspace + this_offset; + } + + for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE) + { + PUT(cd->hwm, 0, GET(hc, 0) + len + ((i != 0)? 2+LINK_SIZE : 1)); + cd->hwm += LINK_SIZE; + } + save_hwm = this_hwm; + code += len; + } + + /* Now chain through the pending brackets, and fill in their length + fields (which are holding the chain links pro tem). */ + + while (bralink != NULL) + { + int oldlinkoffset; + int offset = (int)(code - bralink + 1); + pcre_uchar *bra = code - offset; + oldlinkoffset = GET(bra, 1); + bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset; + *code++ = OP_KET; + PUTINC(code, 0, offset); + PUT(bra, 1, offset); + } + } + + /* If the maximum is unlimited, set a repeater in the final copy. For + ONCE brackets, that's all we need to do. However, possessively repeated + ONCE brackets can be converted into non-capturing brackets, as the + behaviour of (?:xx)++ is the same as (?>xx)++ and this saves having to + deal with possessive ONCEs specially. + + Otherwise, when we are doing the actual compile phase, check to see + whether this group is one that could match an empty string. If so, + convert the initial operator to the S form (e.g. OP_BRA -> OP_SBRA) so + that runtime checking can be done. [This check is also applied to ONCE + groups at runtime, but in a different way.] + + Then, if the quantifier was possessive and the bracket is not a + conditional, we convert the BRA code to the POS form, and the KET code to + KETRPOS. (It turns out to be convenient at runtime to detect this kind of + subpattern at both the start and at the end.) The use of special opcodes + makes it possible to reduce greatly the stack usage in pcre_exec(). If + the group is preceded by OP_BRAZERO, convert this to OP_BRAPOSZERO. + + Then, if the minimum number of matches is 1 or 0, cancel the possessive + flag so that the default action below, of wrapping everything inside + atomic brackets, does not happen. When the minimum is greater than 1, + there will be earlier copies of the group, and so we still have to wrap + the whole thing. */ + + else + { + pcre_uchar *ketcode = code - 1 - LINK_SIZE; + pcre_uchar *bracode = ketcode - GET(ketcode, 1); + + /* Convert possessive ONCE brackets to non-capturing */ + + if ((*bracode == OP_ONCE || *bracode == OP_ONCE_NC) && + possessive_quantifier) *bracode = OP_BRA; + + /* For non-possessive ONCE brackets, all we need to do is to + set the KET. */ + + if (*bracode == OP_ONCE || *bracode == OP_ONCE_NC) + *ketcode = OP_KETRMAX + repeat_type; + + /* Handle non-ONCE brackets and possessive ONCEs (which have been + converted to non-capturing above). */ + + else + { + /* In the compile phase, check for empty string matching. */ + + if (lengthptr == NULL) + { + pcre_uchar *scode = bracode; + do + { + if (could_be_empty_branch(scode, ketcode, utf, cd)) + { + *bracode += OP_SBRA - OP_BRA; + break; + } + scode += GET(scode, 1); + } + while (*scode == OP_ALT); + } + + /* Handle possessive quantifiers. */ + + if (possessive_quantifier) + { + /* For COND brackets, we wrap the whole thing in a possessively + repeated non-capturing bracket, because we have not invented POS + versions of the COND opcodes. Because we are moving code along, we + must ensure that any pending recursive references are updated. */ + + if (*bracode == OP_COND || *bracode == OP_SCOND) + { + int nlen = (int)(code - bracode); + *code = OP_END; + adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm); + memmove(bracode + 1 + LINK_SIZE, bracode, IN_UCHARS(nlen)); + code += 1 + LINK_SIZE; + nlen += 1 + LINK_SIZE; + *bracode = OP_BRAPOS; + *code++ = OP_KETRPOS; + PUTINC(code, 0, nlen); + PUT(bracode, 1, nlen); + } + + /* For non-COND brackets, we modify the BRA code and use KETRPOS. */ + + else + { + *bracode += 1; /* Switch to xxxPOS opcodes */ + *ketcode = OP_KETRPOS; + } + + /* If the minimum is zero, mark it as possessive, then unset the + possessive flag when the minimum is 0 or 1. */ + + if (brazeroptr != NULL) *brazeroptr = OP_BRAPOSZERO; + if (repeat_min < 2) possessive_quantifier = FALSE; + } + + /* Non-possessive quantifier */ + + else *ketcode = OP_KETRMAX + repeat_type; + } + } + } + + /* If previous is OP_FAIL, it was generated by an empty class [] in + JavaScript mode. The other ways in which OP_FAIL can be generated, that is + by (*FAIL) or (?!) set previous to NULL, which gives a "nothing to repeat" + error above. We can just ignore the repeat in JS case. */ + + else if (*previous == OP_FAIL) goto END_REPEAT; + + /* Else there's some kind of shambles */ + + else + { + *errorcodeptr = ERR11; + goto FAILED; + } + + /* If the character following a repeat is '+', or if certain optimization + tests above succeeded, possessive_quantifier is TRUE. For some opcodes, + there are special alternative opcodes for this case. For anything else, we + wrap the entire repeated item inside OP_ONCE brackets. Logically, the '+' + notation is just syntactic sugar, taken from Sun's Java package, but the + special opcodes can optimize it. + + Some (but not all) possessively repeated subpatterns have already been + completely handled in the code just above. For them, possessive_quantifier + is always FALSE at this stage. + + Note that the repeated item starts at tempcode, not at previous, which + might be the first part of a string whose (former) last char we repeated. + + Possessifying an 'exact' quantifier has no effect, so we can ignore it. But + an 'upto' may follow. We skip over an 'exact' item, and then test the + length of what remains before proceeding. */ + + if (possessive_quantifier) + { + int len; + + if (*tempcode == OP_TYPEEXACT) + tempcode += PRIV(OP_lengths)[*tempcode] + + ((tempcode[1 + IMM2_SIZE] == OP_PROP + || tempcode[1 + IMM2_SIZE] == OP_NOTPROP)? 2 : 0); + + else if (*tempcode == OP_EXACT || *tempcode == OP_NOTEXACT) + { + tempcode += PRIV(OP_lengths)[*tempcode]; +#ifdef SUPPORT_UTF + if (utf && HAS_EXTRALEN(tempcode[-1])) + tempcode += GET_EXTRALEN(tempcode[-1]); +#endif + } + + len = (int)(code - tempcode); + if (len > 0) switch (*tempcode) + { + case OP_STAR: *tempcode = OP_POSSTAR; break; + case OP_PLUS: *tempcode = OP_POSPLUS; break; + case OP_QUERY: *tempcode = OP_POSQUERY; break; + case OP_UPTO: *tempcode = OP_POSUPTO; break; + + case OP_STARI: *tempcode = OP_POSSTARI; break; + case OP_PLUSI: *tempcode = OP_POSPLUSI; break; + case OP_QUERYI: *tempcode = OP_POSQUERYI; break; + case OP_UPTOI: *tempcode = OP_POSUPTOI; break; + + case OP_NOTSTAR: *tempcode = OP_NOTPOSSTAR; break; + case OP_NOTPLUS: *tempcode = OP_NOTPOSPLUS; break; + case OP_NOTQUERY: *tempcode = OP_NOTPOSQUERY; break; + case OP_NOTUPTO: *tempcode = OP_NOTPOSUPTO; break; + + case OP_NOTSTARI: *tempcode = OP_NOTPOSSTARI; break; + case OP_NOTPLUSI: *tempcode = OP_NOTPOSPLUSI; break; + case OP_NOTQUERYI: *tempcode = OP_NOTPOSQUERYI; break; + case OP_NOTUPTOI: *tempcode = OP_NOTPOSUPTOI; break; + + case OP_TYPESTAR: *tempcode = OP_TYPEPOSSTAR; break; + case OP_TYPEPLUS: *tempcode = OP_TYPEPOSPLUS; break; + case OP_TYPEQUERY: *tempcode = OP_TYPEPOSQUERY; break; + case OP_TYPEUPTO: *tempcode = OP_TYPEPOSUPTO; break; + + /* Because we are moving code along, we must ensure that any + pending recursive references are updated. */ + + default: + *code = OP_END; + adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm); + memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len)); + code += 1 + LINK_SIZE; + len += 1 + LINK_SIZE; + tempcode[0] = OP_ONCE; + *code++ = OP_KET; + PUTINC(code, 0, len); + PUT(tempcode, 1, len); + break; + } + } + + /* In all case we no longer have a previous item. We also set the + "follows varying string" flag for subsequently encountered reqchars if + it isn't already set and we have just passed a varying length item. */ + + END_REPEAT: + previous = NULL; + cd->req_varyopt |= reqvary; + break; + + + /* ===================================================================*/ + /* Start of nested parenthesized sub-expression, or comment or lookahead or + lookbehind or option setting or condition or all the other extended + parenthesis forms. */ + + case CHAR_LEFT_PARENTHESIS: + newoptions = options; + skipbytes = 0; + bravalue = OP_CBRA; + save_hwm = cd->hwm; + reset_bracount = FALSE; + + /* First deal with various "verbs" that can be introduced by '*'. */ + + ptr++; + if (ptr[0] == CHAR_ASTERISK && (ptr[1] == ':' + || (MAX_255(ptr[1]) && ((cd->ctypes[ptr[1]] & ctype_letter) != 0)))) + { + int i, namelen; + int arglen = 0; + const char *vn = verbnames; + const pcre_uchar *name = ptr + 1; + const pcre_uchar *arg = NULL; + previous = NULL; + ptr++; + while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_letter) != 0) ptr++; + namelen = (int)(ptr - name); + + /* It appears that Perl allows any characters whatsoever, other than + a closing parenthesis, to appear in arguments, so we no longer insist on + letters, digits, and underscores. */ + + if (*ptr == CHAR_COLON) + { + arg = ++ptr; + while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++; + arglen = (int)(ptr - arg); + } + + if (*ptr != CHAR_RIGHT_PARENTHESIS) + { + *errorcodeptr = ERR60; + goto FAILED; + } + + /* Scan the table of verb names */ + + for (i = 0; i < verbcount; i++) + { + if (namelen == verbs[i].len && + STRNCMP_UC_C8(name, vn, namelen) == 0) + { + /* Check for open captures before ACCEPT and convert it to + ASSERT_ACCEPT if in an assertion. */ + + if (verbs[i].op == OP_ACCEPT) + { + open_capitem *oc; + if (arglen != 0) + { + *errorcodeptr = ERR59; + goto FAILED; + } + cd->had_accept = TRUE; + for (oc = cd->open_caps; oc != NULL; oc = oc->next) + { + *code++ = OP_CLOSE; + PUT2INC(code, 0, oc->number); + } + *code++ = (cd->assert_depth > 0)? OP_ASSERT_ACCEPT : OP_ACCEPT; + + /* Do not set firstchar after *ACCEPT */ + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + } + + /* Handle other cases with/without an argument */ + + else if (arglen == 0) + { + if (verbs[i].op < 0) /* Argument is mandatory */ + { + *errorcodeptr = ERR66; + goto FAILED; + } + *code = verbs[i].op; + if (*code++ == OP_THEN) cd->external_flags |= PCRE_HASTHEN; + } + + else + { + if (verbs[i].op_arg < 0) /* Argument is forbidden */ + { + *errorcodeptr = ERR59; + goto FAILED; + } + *code = verbs[i].op_arg; + if (*code++ == OP_THEN_ARG) cd->external_flags |= PCRE_HASTHEN; + *code++ = arglen; + memcpy(code, arg, IN_UCHARS(arglen)); + code += arglen; + *code++ = 0; + } + + break; /* Found verb, exit loop */ + } + + vn += verbs[i].len + 1; + } + + if (i < verbcount) continue; /* Successfully handled a verb */ + *errorcodeptr = ERR60; /* Verb not recognized */ + goto FAILED; + } + + /* Deal with the extended parentheses; all are introduced by '?', and the + appearance of any of them means that this is not a capturing group. */ + + else if (*ptr == CHAR_QUESTION_MARK) + { + int i, set, unset, namelen; + int *optset; + const pcre_uchar *name; + pcre_uchar *slot; + + switch (*(++ptr)) + { + case CHAR_NUMBER_SIGN: /* Comment; skip to ket */ + ptr++; + while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++; + if (*ptr == 0) + { + *errorcodeptr = ERR18; + goto FAILED; + } + continue; + + + /* ------------------------------------------------------------ */ + case CHAR_VERTICAL_LINE: /* Reset capture count for each branch */ + reset_bracount = TRUE; + /* Fall through */ + + /* ------------------------------------------------------------ */ + case CHAR_COLON: /* Non-capturing bracket */ + bravalue = OP_BRA; + ptr++; + break; + + + /* ------------------------------------------------------------ */ + case CHAR_LEFT_PARENTHESIS: + bravalue = OP_COND; /* Conditional group */ + + /* A condition can be an assertion, a number (referring to a numbered + group), a name (referring to a named group), or 'R', referring to + recursion. R<digits> and R&name are also permitted for recursion tests. + + There are several syntaxes for testing a named group: (?(name)) is used + by Python; Perl 5.10 onwards uses (?(<name>) or (?('name')). + + There are two unfortunate ambiguities, caused by history. (a) 'R' can + be the recursive thing or the name 'R' (and similarly for 'R' followed + by digits), and (b) a number could be a name that consists of digits. + In both cases, we look for a name first; if not found, we try the other + cases. */ + + /* For conditions that are assertions, check the syntax, and then exit + the switch. This will take control down to where bracketed groups, + including assertions, are processed. */ + + if (ptr[1] == CHAR_QUESTION_MARK && (ptr[2] == CHAR_EQUALS_SIGN || + ptr[2] == CHAR_EXCLAMATION_MARK || ptr[2] == CHAR_LESS_THAN_SIGN)) + break; + + /* Most other conditions use OP_CREF (a couple change to OP_RREF + below), and all need to skip 1+IMM2_SIZE bytes at the start of the group. */ + + code[1+LINK_SIZE] = OP_CREF; + skipbytes = 1+IMM2_SIZE; + refsign = -1; + + /* Check for a test for recursion in a named group. */ + + if (ptr[1] == CHAR_R && ptr[2] == CHAR_AMPERSAND) + { + terminator = -1; + ptr += 2; + code[1+LINK_SIZE] = OP_RREF; /* Change the type of test */ + } + + /* Check for a test for a named group's having been set, using the Perl + syntax (?(<name>) or (?('name') */ + + else if (ptr[1] == CHAR_LESS_THAN_SIGN) + { + terminator = CHAR_GREATER_THAN_SIGN; + ptr++; + } + else if (ptr[1] == CHAR_APOSTROPHE) + { + terminator = CHAR_APOSTROPHE; + ptr++; + } + else + { + terminator = 0; + if (ptr[1] == CHAR_MINUS || ptr[1] == CHAR_PLUS) refsign = *(++ptr); + } + + /* We now expect to read a name; any thing else is an error */ + + if (!MAX_255(ptr[1]) || (cd->ctypes[ptr[1]] & ctype_word) == 0) + { + ptr += 1; /* To get the right offset */ + *errorcodeptr = ERR28; + goto FAILED; + } + + /* Read the name, but also get it as a number if it's all digits */ + + recno = 0; + name = ++ptr; + while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0) + { + if (recno >= 0) + recno = (IS_DIGIT(*ptr))? recno * 10 + *ptr - CHAR_0 : -1; + ptr++; + } + namelen = (int)(ptr - name); + + if ((terminator > 0 && *ptr++ != terminator) || + *ptr++ != CHAR_RIGHT_PARENTHESIS) + { + ptr--; /* Error offset */ + *errorcodeptr = ERR26; + goto FAILED; + } + + /* Do no further checking in the pre-compile phase. */ + + if (lengthptr != NULL) break; + + /* In the real compile we do the work of looking for the actual + reference. If the string started with "+" or "-" we require the rest to + be digits, in which case recno will be set. */ + + if (refsign > 0) + { + if (recno <= 0) + { + *errorcodeptr = ERR58; + goto FAILED; + } + recno = (refsign == CHAR_MINUS)? + cd->bracount - recno + 1 : recno +cd->bracount; + if (recno <= 0 || recno > cd->final_bracount) + { + *errorcodeptr = ERR15; + goto FAILED; + } + PUT2(code, 2+LINK_SIZE, recno); + break; + } + + /* Otherwise (did not start with "+" or "-"), start by looking for the + name. If we find a name, add one to the opcode to change OP_CREF or + OP_RREF into OP_NCREF or OP_NRREF. These behave exactly the same, + except they record that the reference was originally to a name. The + information is used to check duplicate names. */ + + slot = cd->name_table; + for (i = 0; i < cd->names_found; i++) + { + if (STRNCMP_UC_UC(name, slot+IMM2_SIZE, namelen) == 0) break; + slot += cd->name_entry_size; + } + + /* Found a previous named subpattern */ + + if (i < cd->names_found) + { + recno = GET2(slot, 0); + PUT2(code, 2+LINK_SIZE, recno); + code[1+LINK_SIZE]++; + } + + /* Search the pattern for a forward reference */ + + else if ((i = find_parens(cd, name, namelen, + (options & PCRE_EXTENDED) != 0, utf)) > 0) + { + PUT2(code, 2+LINK_SIZE, i); + code[1+LINK_SIZE]++; + } + + /* If terminator == 0 it means that the name followed directly after + the opening parenthesis [e.g. (?(abc)...] and in this case there are + some further alternatives to try. For the cases where terminator != 0 + [things like (?(<name>... or (?('name')... or (?(R&name)... ] we have + now checked all the possibilities, so give an error. */ + + else if (terminator != 0) + { + *errorcodeptr = ERR15; + goto FAILED; + } + + /* Check for (?(R) for recursion. Allow digits after R to specify a + specific group number. */ + + else if (*name == CHAR_R) + { + recno = 0; + for (i = 1; i < namelen; i++) + { + if (!IS_DIGIT(name[i])) + { + *errorcodeptr = ERR15; + goto FAILED; + } + recno = recno * 10 + name[i] - CHAR_0; + } + if (recno == 0) recno = RREF_ANY; + code[1+LINK_SIZE] = OP_RREF; /* Change test type */ + PUT2(code, 2+LINK_SIZE, recno); + } + + /* Similarly, check for the (?(DEFINE) "condition", which is always + false. */ + + else if (namelen == 6 && STRNCMP_UC_C8(name, STRING_DEFINE, 6) == 0) + { + code[1+LINK_SIZE] = OP_DEF; + skipbytes = 1; + } + + /* Check for the "name" actually being a subpattern number. We are + in the second pass here, so final_bracount is set. */ + + else if (recno > 0 && recno <= cd->final_bracount) + { + PUT2(code, 2+LINK_SIZE, recno); + } + + /* Either an unidentified subpattern, or a reference to (?(0) */ + + else + { + *errorcodeptr = (recno == 0)? ERR35: ERR15; + goto FAILED; + } + break; + + + /* ------------------------------------------------------------ */ + case CHAR_EQUALS_SIGN: /* Positive lookahead */ + bravalue = OP_ASSERT; + cd->assert_depth += 1; + ptr++; + break; + + + /* ------------------------------------------------------------ */ + case CHAR_EXCLAMATION_MARK: /* Negative lookahead */ + ptr++; + if (*ptr == CHAR_RIGHT_PARENTHESIS) /* Optimize (?!) */ + { + *code++ = OP_FAIL; + previous = NULL; + continue; + } + bravalue = OP_ASSERT_NOT; + cd->assert_depth += 1; + break; + + + /* ------------------------------------------------------------ */ + case CHAR_LESS_THAN_SIGN: /* Lookbehind or named define */ + switch (ptr[1]) + { + case CHAR_EQUALS_SIGN: /* Positive lookbehind */ + bravalue = OP_ASSERTBACK; + cd->assert_depth += 1; + ptr += 2; + break; + + case CHAR_EXCLAMATION_MARK: /* Negative lookbehind */ + bravalue = OP_ASSERTBACK_NOT; + cd->assert_depth += 1; + ptr += 2; + break; + + default: /* Could be name define, else bad */ + if (MAX_255(ptr[1]) && (cd->ctypes[ptr[1]] & ctype_word) != 0) + goto DEFINE_NAME; + ptr++; /* Correct offset for error */ + *errorcodeptr = ERR24; + goto FAILED; + } + break; + + + /* ------------------------------------------------------------ */ + case CHAR_GREATER_THAN_SIGN: /* One-time brackets */ + bravalue = OP_ONCE; + ptr++; + break; + + + /* ------------------------------------------------------------ */ + case CHAR_C: /* Callout - may be followed by digits; */ + previous_callout = code; /* Save for later completion */ + after_manual_callout = 1; /* Skip one item before completing */ + *code++ = OP_CALLOUT; + { + int n = 0; + ptr++; + while(IS_DIGIT(*ptr)) + n = n * 10 + *ptr++ - CHAR_0; + if (*ptr != CHAR_RIGHT_PARENTHESIS) + { + *errorcodeptr = ERR39; + goto FAILED; + } + if (n > 255) + { + *errorcodeptr = ERR38; + goto FAILED; + } + *code++ = n; + PUT(code, 0, (int)(ptr - cd->start_pattern + 1)); /* Pattern offset */ + PUT(code, LINK_SIZE, 0); /* Default length */ + code += 2 * LINK_SIZE; + } + previous = NULL; + continue; + + + /* ------------------------------------------------------------ */ + case CHAR_P: /* Python-style named subpattern handling */ + if (*(++ptr) == CHAR_EQUALS_SIGN || + *ptr == CHAR_GREATER_THAN_SIGN) /* Reference or recursion */ + { + is_recurse = *ptr == CHAR_GREATER_THAN_SIGN; + terminator = CHAR_RIGHT_PARENTHESIS; + goto NAMED_REF_OR_RECURSE; + } + else if (*ptr != CHAR_LESS_THAN_SIGN) /* Test for Python-style defn */ + { + *errorcodeptr = ERR41; + goto FAILED; + } + /* Fall through to handle (?P< as (?< is handled */ + + + /* ------------------------------------------------------------ */ + DEFINE_NAME: /* Come here from (?< handling */ + case CHAR_APOSTROPHE: + { + terminator = (*ptr == CHAR_LESS_THAN_SIGN)? + CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE; + name = ++ptr; + + while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0) ptr++; + namelen = (int)(ptr - name); + + /* In the pre-compile phase, just do a syntax check. */ + + if (lengthptr != NULL) + { + if (*ptr != terminator) + { + *errorcodeptr = ERR42; + goto FAILED; + } + if (cd->names_found >= MAX_NAME_COUNT) + { + *errorcodeptr = ERR49; + goto FAILED; + } + if (namelen + IMM2_SIZE + 1 > cd->name_entry_size) + { + cd->name_entry_size = namelen + IMM2_SIZE + 1; + if (namelen > MAX_NAME_SIZE) + { + *errorcodeptr = ERR48; + goto FAILED; + } + } + } + + /* In the real compile, create the entry in the table, maintaining + alphabetical order. Duplicate names for different numbers are + permitted only if PCRE_DUPNAMES is set. Duplicate names for the same + number are always OK. (An existing number can be re-used if (?| + appears in the pattern.) In either event, a duplicate name results in + a duplicate entry in the table, even if the number is the same. This + is because the number of names, and hence the table size, is computed + in the pre-compile, and it affects various numbers and pointers which + would all have to be modified, and the compiled code moved down, if + duplicates with the same number were omitted from the table. This + doesn't seem worth the hassle. However, *different* names for the + same number are not permitted. */ + + else + { + BOOL dupname = FALSE; + slot = cd->name_table; + + for (i = 0; i < cd->names_found; i++) + { + int crc = memcmp(name, slot+IMM2_SIZE, IN_UCHARS(namelen)); + if (crc == 0) + { + if (slot[IMM2_SIZE+namelen] == 0) + { + if (GET2(slot, 0) != cd->bracount + 1 && + (options & PCRE_DUPNAMES) == 0) + { + *errorcodeptr = ERR43; + goto FAILED; + } + else dupname = TRUE; + } + else crc = -1; /* Current name is a substring */ + } + + /* Make space in the table and break the loop for an earlier + name. For a duplicate or later name, carry on. We do this for + duplicates so that in the simple case (when ?(| is not used) they + are in order of their numbers. */ + + if (crc < 0) + { + memmove(slot + cd->name_entry_size, slot, + IN_UCHARS((cd->names_found - i) * cd->name_entry_size)); + break; + } + + /* Continue the loop for a later or duplicate name */ + + slot += cd->name_entry_size; + } + + /* For non-duplicate names, check for a duplicate number before + adding the new name. */ + + if (!dupname) + { + pcre_uchar *cslot = cd->name_table; + for (i = 0; i < cd->names_found; i++) + { + if (cslot != slot) + { + if (GET2(cslot, 0) == cd->bracount + 1) + { + *errorcodeptr = ERR65; + goto FAILED; + } + } + else i--; + cslot += cd->name_entry_size; + } + } + + PUT2(slot, 0, cd->bracount + 1); + memcpy(slot + IMM2_SIZE, name, IN_UCHARS(namelen)); + slot[IMM2_SIZE + namelen] = 0; + } + } + + /* In both pre-compile and compile, count the number of names we've + encountered. */ + + cd->names_found++; + ptr++; /* Move past > or ' */ + goto NUMBERED_GROUP; + + + /* ------------------------------------------------------------ */ + case CHAR_AMPERSAND: /* Perl recursion/subroutine syntax */ + terminator = CHAR_RIGHT_PARENTHESIS; + is_recurse = TRUE; + /* Fall through */ + + /* We come here from the Python syntax above that handles both + references (?P=name) and recursion (?P>name), as well as falling + through from the Perl recursion syntax (?&name). We also come here from + the Perl \k<name> or \k'name' back reference syntax and the \k{name} + .NET syntax, and the Oniguruma \g<...> and \g'...' subroutine syntax. */ + + NAMED_REF_OR_RECURSE: + name = ++ptr; + while (MAX_255(*ptr) && (cd->ctypes[*ptr] & ctype_word) != 0) ptr++; + namelen = (int)(ptr - name); + + /* In the pre-compile phase, do a syntax check. We used to just set + a dummy reference number, because it was not used in the first pass. + However, with the change of recursive back references to be atomic, + we have to look for the number so that this state can be identified, as + otherwise the incorrect length is computed. If it's not a backwards + reference, the dummy number will do. */ + + if (lengthptr != NULL) + { + const pcre_uchar *temp; + + if (namelen == 0) + { + *errorcodeptr = ERR62; + goto FAILED; + } + if (*ptr != terminator) + { + *errorcodeptr = ERR42; + goto FAILED; + } + if (namelen > MAX_NAME_SIZE) + { + *errorcodeptr = ERR48; + goto FAILED; + } + + /* The name table does not exist in the first pass, so we cannot + do a simple search as in the code below. Instead, we have to scan the + pattern to find the number. It is important that we scan it only as + far as we have got because the syntax of named subpatterns has not + been checked for the rest of the pattern, and find_parens() assumes + correct syntax. In any case, it's a waste of resources to scan + further. We stop the scan at the current point by temporarily + adjusting the value of cd->endpattern. */ + + temp = cd->end_pattern; + cd->end_pattern = ptr; + recno = find_parens(cd, name, namelen, + (options & PCRE_EXTENDED) != 0, utf); + cd->end_pattern = temp; + if (recno < 0) recno = 0; /* Forward ref; set dummy number */ + } + + /* In the real compile, seek the name in the table. We check the name + first, and then check that we have reached the end of the name in the + table. That way, if the name that is longer than any in the table, + the comparison will fail without reading beyond the table entry. */ + + else + { + slot = cd->name_table; + for (i = 0; i < cd->names_found; i++) + { + if (STRNCMP_UC_UC(name, slot+IMM2_SIZE, namelen) == 0 && + slot[IMM2_SIZE+namelen] == 0) + break; + slot += cd->name_entry_size; + } + + if (i < cd->names_found) /* Back reference */ + { + recno = GET2(slot, 0); + } + else if ((recno = /* Forward back reference */ + find_parens(cd, name, namelen, + (options & PCRE_EXTENDED) != 0, utf)) <= 0) + { + *errorcodeptr = ERR15; + goto FAILED; + } + } + + /* In both phases, we can now go to the code than handles numerical + recursion or backreferences. */ + + if (is_recurse) goto HANDLE_RECURSION; + else goto HANDLE_REFERENCE; + + + /* ------------------------------------------------------------ */ + case CHAR_R: /* Recursion */ + ptr++; /* Same as (?0) */ + /* Fall through */ + + + /* ------------------------------------------------------------ */ + case CHAR_MINUS: case CHAR_PLUS: /* Recursion or subroutine */ + case CHAR_0: case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: + case CHAR_5: case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9: + { + const pcre_uchar *called; + terminator = CHAR_RIGHT_PARENTHESIS; + + /* Come here from the \g<...> and \g'...' code (Oniguruma + compatibility). However, the syntax has been checked to ensure that + the ... are a (signed) number, so that neither ERR63 nor ERR29 will + be called on this path, nor with the jump to OTHER_CHAR_AFTER_QUERY + ever be taken. */ + + HANDLE_NUMERICAL_RECURSION: + + if ((refsign = *ptr) == CHAR_PLUS) + { + ptr++; + if (!IS_DIGIT(*ptr)) + { + *errorcodeptr = ERR63; + goto FAILED; + } + } + else if (refsign == CHAR_MINUS) + { + if (!IS_DIGIT(ptr[1])) + goto OTHER_CHAR_AFTER_QUERY; + ptr++; + } + + recno = 0; + while(IS_DIGIT(*ptr)) + recno = recno * 10 + *ptr++ - CHAR_0; + + if (*ptr != terminator) + { + *errorcodeptr = ERR29; + goto FAILED; + } + + if (refsign == CHAR_MINUS) + { + if (recno == 0) + { + *errorcodeptr = ERR58; + goto FAILED; + } + recno = cd->bracount - recno + 1; + if (recno <= 0) + { + *errorcodeptr = ERR15; + goto FAILED; + } + } + else if (refsign == CHAR_PLUS) + { + if (recno == 0) + { + *errorcodeptr = ERR58; + goto FAILED; + } + recno += cd->bracount; + } + + /* Come here from code above that handles a named recursion */ + + HANDLE_RECURSION: + + previous = code; + called = cd->start_code; + + /* When we are actually compiling, find the bracket that is being + referenced. Temporarily end the regex in case it doesn't exist before + this point. If we end up with a forward reference, first check that + the bracket does occur later so we can give the error (and position) + now. Then remember this forward reference in the workspace so it can + be filled in at the end. */ + + if (lengthptr == NULL) + { + *code = OP_END; + if (recno != 0) + called = PRIV(find_bracket)(cd->start_code, utf, recno); + + /* Forward reference */ + + if (called == NULL) + { + if (find_parens(cd, NULL, recno, + (options & PCRE_EXTENDED) != 0, utf) < 0) + { + *errorcodeptr = ERR15; + goto FAILED; + } + + /* Fudge the value of "called" so that when it is inserted as an + offset below, what it actually inserted is the reference number + of the group. Then remember the forward reference. */ + + called = cd->start_code + recno; + if (cd->hwm >= cd->start_workspace + cd->workspace_size - + WORK_SIZE_SAFETY_MARGIN) + { + *errorcodeptr = expand_workspace(cd); + if (*errorcodeptr != 0) goto FAILED; + } + PUTINC(cd->hwm, 0, (int)(code + 1 - cd->start_code)); + } + + /* If not a forward reference, and the subpattern is still open, + this is a recursive call. We check to see if this is a left + recursion that could loop for ever, and diagnose that case. We + must not, however, do this check if we are in a conditional + subpattern because the condition might be testing for recursion in + a pattern such as /(?(R)a+|(?R)b)/, which is perfectly valid. + Forever loops are also detected at runtime, so those that occur in + conditional subpatterns will be picked up then. */ + + else if (GET(called, 1) == 0 && cond_depth <= 0 && + could_be_empty(called, code, bcptr, utf, cd)) + { + *errorcodeptr = ERR40; + goto FAILED; + } + } + + /* Insert the recursion/subroutine item. It does not have a set first + character (relevant if it is repeated, because it will then be + wrapped with ONCE brackets). */ + + *code = OP_RECURSE; + PUT(code, 1, (int)(called - cd->start_code)); + code += 1 + LINK_SIZE; + groupsetfirstchar = FALSE; + } + + /* Can't determine a first byte now */ + + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + continue; + + + /* ------------------------------------------------------------ */ + default: /* Other characters: check option setting */ + OTHER_CHAR_AFTER_QUERY: + set = unset = 0; + optset = &set; + + while (*ptr != CHAR_RIGHT_PARENTHESIS && *ptr != CHAR_COLON) + { + switch (*ptr++) + { + case CHAR_MINUS: optset = &unset; break; + + case CHAR_J: /* Record that it changed in the external options */ + *optset |= PCRE_DUPNAMES; + cd->external_flags |= PCRE_JCHANGED; + break; + + case CHAR_i: *optset |= PCRE_CASELESS; break; + case CHAR_m: *optset |= PCRE_MULTILINE; break; + case CHAR_s: *optset |= PCRE_DOTALL; break; + case CHAR_x: *optset |= PCRE_EXTENDED; break; + case CHAR_U: *optset |= PCRE_UNGREEDY; break; + case CHAR_X: *optset |= PCRE_EXTRA; break; + + default: *errorcodeptr = ERR12; + ptr--; /* Correct the offset */ + goto FAILED; + } + } + + /* Set up the changed option bits, but don't change anything yet. */ + + newoptions = (options | set) & (~unset); + + /* If the options ended with ')' this is not the start of a nested + group with option changes, so the options change at this level. If this + item is right at the start of the pattern, the options can be + abstracted and made external in the pre-compile phase, and ignored in + the compile phase. This can be helpful when matching -- for instance in + caseless checking of required bytes. + + If the code pointer is not (cd->start_code + 1 + LINK_SIZE), we are + definitely *not* at the start of the pattern because something has been + compiled. In the pre-compile phase, however, the code pointer can have + that value after the start, because it gets reset as code is discarded + during the pre-compile. However, this can happen only at top level - if + we are within parentheses, the starting BRA will still be present. At + any parenthesis level, the length value can be used to test if anything + has been compiled at that level. Thus, a test for both these conditions + is necessary to ensure we correctly detect the start of the pattern in + both phases. + + If we are not at the pattern start, reset the greedy defaults and the + case value for firstchar and reqchar. */ + + if (*ptr == CHAR_RIGHT_PARENTHESIS) + { + if (code == cd->start_code + 1 + LINK_SIZE && + (lengthptr == NULL || *lengthptr == 2 + 2*LINK_SIZE)) + { + cd->external_options = newoptions; + } + else + { + greedy_default = ((newoptions & PCRE_UNGREEDY) != 0); + greedy_non_default = greedy_default ^ 1; + req_caseopt = ((newoptions & PCRE_CASELESS) != 0)? REQ_CASELESS:0; + } + + /* Change options at this level, and pass them back for use + in subsequent branches. */ + + *optionsptr = options = newoptions; + previous = NULL; /* This item can't be repeated */ + continue; /* It is complete */ + } + + /* If the options ended with ':' we are heading into a nested group + with possible change of options. Such groups are non-capturing and are + not assertions of any kind. All we need to do is skip over the ':'; + the newoptions value is handled below. */ + + bravalue = OP_BRA; + ptr++; + } /* End of switch for character following (? */ + } /* End of (? handling */ + + /* Opening parenthesis not followed by '*' or '?'. If PCRE_NO_AUTO_CAPTURE + is set, all unadorned brackets become non-capturing and behave like (?:...) + brackets. */ + + else if ((options & PCRE_NO_AUTO_CAPTURE) != 0) + { + bravalue = OP_BRA; + } + + /* Else we have a capturing group. */ + + else + { + NUMBERED_GROUP: + cd->bracount += 1; + PUT2(code, 1+LINK_SIZE, cd->bracount); + skipbytes = IMM2_SIZE; + } + + /* Process nested bracketed regex. Assertions used not to be repeatable, + but this was changed for Perl compatibility, so all kinds can now be + repeated. We copy code into a non-register variable (tempcode) in order to + be able to pass its address because some compilers complain otherwise. */ + + previous = code; /* For handling repetition */ + *code = bravalue; + tempcode = code; + tempreqvary = cd->req_varyopt; /* Save value before bracket */ + tempbracount = cd->bracount; /* Save value before bracket */ + length_prevgroup = 0; /* Initialize for pre-compile phase */ + + if (!compile_regex( + newoptions, /* The complete new option state */ + &tempcode, /* Where to put code (updated) */ + &ptr, /* Input pointer (updated) */ + errorcodeptr, /* Where to put an error message */ + (bravalue == OP_ASSERTBACK || + bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */ + reset_bracount, /* True if (?| group */ + skipbytes, /* Skip over bracket number */ + cond_depth + + ((bravalue == OP_COND)?1:0), /* Depth of condition subpatterns */ + &subfirstchar, /* For possible first char */ + &subreqchar, /* For possible last char */ + bcptr, /* Current branch chain */ + cd, /* Tables block */ + (lengthptr == NULL)? NULL : /* Actual compile phase */ + &length_prevgroup /* Pre-compile phase */ + )) + goto FAILED; + + /* If this was an atomic group and there are no capturing groups within it, + generate OP_ONCE_NC instead of OP_ONCE. */ + + if (bravalue == OP_ONCE && cd->bracount <= tempbracount) + *code = OP_ONCE_NC; + + if (bravalue >= OP_ASSERT && bravalue <= OP_ASSERTBACK_NOT) + cd->assert_depth -= 1; + + /* At the end of compiling, code is still pointing to the start of the + group, while tempcode has been updated to point past the end of the group. + The pattern pointer (ptr) is on the bracket. + + If this is a conditional bracket, check that there are no more than + two branches in the group, or just one if it's a DEFINE group. We do this + in the real compile phase, not in the pre-pass, where the whole group may + not be available. */ + + if (bravalue == OP_COND && lengthptr == NULL) + { + pcre_uchar *tc = code; + int condcount = 0; + + do { + condcount++; + tc += GET(tc,1); + } + while (*tc != OP_KET); + + /* A DEFINE group is never obeyed inline (the "condition" is always + false). It must have only one branch. */ + + if (code[LINK_SIZE+1] == OP_DEF) + { + if (condcount > 1) + { + *errorcodeptr = ERR54; + goto FAILED; + } + bravalue = OP_DEF; /* Just a flag to suppress char handling below */ + } + + /* A "normal" conditional group. If there is just one branch, we must not + make use of its firstchar or reqchar, because this is equivalent to an + empty second branch. */ + + else + { + if (condcount > 2) + { + *errorcodeptr = ERR27; + goto FAILED; + } + if (condcount == 1) subfirstchar = subreqchar = REQ_NONE; + } + } + + /* Error if hit end of pattern */ + + if (*ptr != CHAR_RIGHT_PARENTHESIS) + { + *errorcodeptr = ERR14; + goto FAILED; + } + + /* In the pre-compile phase, update the length by the length of the group, + less the brackets at either end. Then reduce the compiled code to just a + set of non-capturing brackets so that it doesn't use much memory if it is + duplicated by a quantifier.*/ + + if (lengthptr != NULL) + { + if (OFLOW_MAX - *lengthptr < length_prevgroup - 2 - 2*LINK_SIZE) + { + *errorcodeptr = ERR20; + goto FAILED; + } + *lengthptr += length_prevgroup - 2 - 2*LINK_SIZE; + code++; /* This already contains bravalue */ + PUTINC(code, 0, 1 + LINK_SIZE); + *code++ = OP_KET; + PUTINC(code, 0, 1 + LINK_SIZE); + break; /* No need to waste time with special character handling */ + } + + /* Otherwise update the main code pointer to the end of the group. */ + + code = tempcode; + + /* For a DEFINE group, required and first character settings are not + relevant. */ + + if (bravalue == OP_DEF) break; + + /* Handle updating of the required and first characters for other types of + group. Update for normal brackets of all kinds, and conditions with two + branches (see code above). If the bracket is followed by a quantifier with + zero repeat, we have to back off. Hence the definition of zeroreqchar and + zerofirstchar outside the main loop so that they can be accessed for the + back off. */ + + zeroreqchar = reqchar; + zerofirstchar = firstchar; + groupsetfirstchar = FALSE; + + if (bravalue >= OP_ONCE) + { + /* If we have not yet set a firstchar in this branch, take it from the + subpattern, remembering that it was set here so that a repeat of more + than one can replicate it as reqchar if necessary. If the subpattern has + no firstchar, set "none" for the whole branch. In both cases, a zero + repeat forces firstchar to "none". */ + + if (firstchar == REQ_UNSET) + { + if (subfirstchar >= 0) + { + firstchar = subfirstchar; + groupsetfirstchar = TRUE; + } + else firstchar = REQ_NONE; + zerofirstchar = REQ_NONE; + } + + /* If firstchar was previously set, convert the subpattern's firstchar + into reqchar if there wasn't one, using the vary flag that was in + existence beforehand. */ + + else if (subfirstchar >= 0 && subreqchar < 0) + subreqchar = subfirstchar | tempreqvary; + + /* If the subpattern set a required byte (or set a first byte that isn't + really the first byte - see above), set it. */ + + if (subreqchar >= 0) reqchar = subreqchar; + } + + /* For a forward assertion, we take the reqchar, if set. This can be + helpful if the pattern that follows the assertion doesn't set a different + char. For example, it's useful for /(?=abcde).+/. We can't set firstchar + for an assertion, however because it leads to incorrect effect for patterns + such as /(?=a)a.+/ when the "real" "a" would then become a reqchar instead + of a firstchar. This is overcome by a scan at the end if there's no + firstchar, looking for an asserted first char. */ + + else if (bravalue == OP_ASSERT && subreqchar >= 0) reqchar = subreqchar; + break; /* End of processing '(' */ + + + /* ===================================================================*/ + /* Handle metasequences introduced by \. For ones like \d, the ESC_ values + are arranged to be the negation of the corresponding OP_values in the + default case when PCRE_UCP is not set. For the back references, the values + are ESC_REF plus the reference number. Only back references and those types + that consume a character may be repeated. We can test for values between + ESC_b and ESC_Z for the latter; this may have to change if any new ones are + ever created. */ + + case CHAR_BACKSLASH: + tempptr = ptr; + c = check_escape(&ptr, errorcodeptr, cd->bracount, options, FALSE); + if (*errorcodeptr != 0) goto FAILED; + + if (c < 0) + { + if (-c == ESC_Q) /* Handle start of quoted string */ + { + if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E) + ptr += 2; /* avoid empty string */ + else inescq = TRUE; + continue; + } + + if (-c == ESC_E) continue; /* Perl ignores an orphan \E */ + + /* For metasequences that actually match a character, we disable the + setting of a first character if it hasn't already been set. */ + + if (firstchar == REQ_UNSET && -c > ESC_b && -c < ESC_Z) + firstchar = REQ_NONE; + + /* Set values to reset to if this is followed by a zero repeat. */ + + zerofirstchar = firstchar; + zeroreqchar = reqchar; + + /* \g<name> or \g'name' is a subroutine call by name and \g<n> or \g'n' + is a subroutine call by number (Oniguruma syntax). In fact, the value + -ESC_g is returned only for these cases. So we don't need to check for < + or ' if the value is -ESC_g. For the Perl syntax \g{n} the value is + -ESC_REF+n, and for the Perl syntax \g{name} the result is -ESC_k (as + that is a synonym for a named back reference). */ + + if (-c == ESC_g) + { + const pcre_uchar *p; + save_hwm = cd->hwm; /* Normally this is set when '(' is read */ + terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)? + CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE; + + /* These two statements stop the compiler for warning about possibly + unset variables caused by the jump to HANDLE_NUMERICAL_RECURSION. In + fact, because we actually check for a number below, the paths that + would actually be in error are never taken. */ + + skipbytes = 0; + reset_bracount = FALSE; + + /* Test for a name */ + + if (ptr[1] != CHAR_PLUS && ptr[1] != CHAR_MINUS) + { + BOOL is_a_number = TRUE; + for (p = ptr + 1; *p != 0 && *p != terminator; p++) + { + if (!MAX_255(*p)) { is_a_number = FALSE; break; } + if ((cd->ctypes[*p] & ctype_digit) == 0) is_a_number = FALSE; + if ((cd->ctypes[*p] & ctype_word) == 0) break; + } + if (*p != terminator) + { + *errorcodeptr = ERR57; + break; + } + if (is_a_number) + { + ptr++; + goto HANDLE_NUMERICAL_RECURSION; + } + is_recurse = TRUE; + goto NAMED_REF_OR_RECURSE; + } + + /* Test a signed number in angle brackets or quotes. */ + + p = ptr + 2; + while (IS_DIGIT(*p)) p++; + if (*p != terminator) + { + *errorcodeptr = ERR57; + break; + } + ptr++; + goto HANDLE_NUMERICAL_RECURSION; + } + + /* \k<name> or \k'name' is a back reference by name (Perl syntax). + We also support \k{name} (.NET syntax). */ + + if (-c == ESC_k) + { + if ((ptr[1] != CHAR_LESS_THAN_SIGN && + ptr[1] != CHAR_APOSTROPHE && ptr[1] != CHAR_LEFT_CURLY_BRACKET)) + { + *errorcodeptr = ERR69; + break; + } + is_recurse = FALSE; + terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)? + CHAR_GREATER_THAN_SIGN : (*ptr == CHAR_APOSTROPHE)? + CHAR_APOSTROPHE : CHAR_RIGHT_CURLY_BRACKET; + goto NAMED_REF_OR_RECURSE; + } + + /* Back references are handled specially; must disable firstchar if + not set to cope with cases like (?=(\w+))\1: which would otherwise set + ':' later. */ + + if (-c >= ESC_REF) + { + open_capitem *oc; + recno = -c - ESC_REF; + + HANDLE_REFERENCE: /* Come here from named backref handling */ + if (firstchar == REQ_UNSET) firstchar = REQ_NONE; + previous = code; + *code++ = ((options & PCRE_CASELESS) != 0)? OP_REFI : OP_REF; + PUT2INC(code, 0, recno); + cd->backref_map |= (recno < 32)? (1 << recno) : 1; + if (recno > cd->top_backref) cd->top_backref = recno; + + /* Check to see if this back reference is recursive, that it, it + is inside the group that it references. A flag is set so that the + group can be made atomic. */ + + for (oc = cd->open_caps; oc != NULL; oc = oc->next) + { + if (oc->number == recno) + { + oc->flag = TRUE; + break; + } + } + } + + /* So are Unicode property matches, if supported. */ + +#ifdef SUPPORT_UCP + else if (-c == ESC_P || -c == ESC_p) + { + BOOL negated; + int pdata; + int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr); + if (ptype < 0) goto FAILED; + previous = code; + *code++ = ((-c == ESC_p) != negated)? OP_PROP : OP_NOTPROP; + *code++ = ptype; + *code++ = pdata; + } +#else + + /* If Unicode properties are not supported, \X, \P, and \p are not + allowed. */ + + else if (-c == ESC_X || -c == ESC_P || -c == ESC_p) + { + *errorcodeptr = ERR45; + goto FAILED; + } +#endif + + /* For the rest (including \X when Unicode properties are supported), we + can obtain the OP value by negating the escape value in the default + situation when PCRE_UCP is not set. When it *is* set, we substitute + Unicode property tests. */ + + else + { +#ifdef SUPPORT_UCP + if (-c >= ESC_DU && -c <= ESC_wu) + { + nestptr = ptr + 1; /* Where to resume */ + ptr = substitutes[-c - ESC_DU] - 1; /* Just before substitute */ + } + else +#endif + /* In non-UTF-8 mode, we turn \C into OP_ALLANY instead of OP_ANYBYTE + so that it works in DFA mode and in lookbehinds. */ + + { + previous = (-c > ESC_b && -c < ESC_Z)? code : NULL; + *code++ = (!utf && c == -ESC_C)? OP_ALLANY : -c; + } + } + continue; + } + + /* We have a data character whose value is in c. In UTF-8 mode it may have + a value > 127. We set its representation in the length/buffer, and then + handle it as a data character. */ + +#ifdef SUPPORT_UTF + if (utf && c > MAX_VALUE_FOR_SINGLE_CHAR) + mclength = PRIV(ord2utf)(c, mcbuffer); + else +#endif + + { + mcbuffer[0] = c; + mclength = 1; + } + goto ONE_CHAR; + + + /* ===================================================================*/ + /* Handle a literal character. It is guaranteed not to be whitespace or # + when the extended flag is set. If we are in UTF-8 mode, it may be a + multi-byte literal character. */ + + default: + NORMAL_CHAR: + mclength = 1; + mcbuffer[0] = c; + +#ifdef SUPPORT_UTF + if (utf && HAS_EXTRALEN(c)) + ACROSSCHAR(TRUE, ptr[1], mcbuffer[mclength++] = *(++ptr)); +#endif + + /* At this point we have the character's bytes in mcbuffer, and the length + in mclength. When not in UTF-8 mode, the length is always 1. */ + + ONE_CHAR: + previous = code; + *code++ = ((options & PCRE_CASELESS) != 0)? OP_CHARI : OP_CHAR; + for (c = 0; c < mclength; c++) *code++ = mcbuffer[c]; + + /* Remember if \r or \n were seen */ + + if (mcbuffer[0] == CHAR_CR || mcbuffer[0] == CHAR_NL) + cd->external_flags |= PCRE_HASCRORLF; + + /* Set the first and required bytes appropriately. If no previous first + byte, set it from this character, but revert to none on a zero repeat. + Otherwise, leave the firstchar value alone, and don't change it on a zero + repeat. */ + + if (firstchar == REQ_UNSET) + { + zerofirstchar = REQ_NONE; + zeroreqchar = reqchar; + + /* If the character is more than one byte long, we can set firstchar + only if it is not to be matched caselessly. */ + + if (mclength == 1 || req_caseopt == 0) + { + firstchar = mcbuffer[0] | req_caseopt; + if (mclength != 1) reqchar = code[-1] | cd->req_varyopt; + } + else firstchar = reqchar = REQ_NONE; + } + + /* firstchar was previously set; we can set reqchar only if the length is + 1 or the matching is caseful. */ + + else + { + zerofirstchar = firstchar; + zeroreqchar = reqchar; + if (mclength == 1 || req_caseopt == 0) + reqchar = code[-1] | req_caseopt | cd->req_varyopt; + } + + break; /* End of literal character handling */ + } + } /* end of big loop */ + + +/* Control never reaches here by falling through, only by a goto for all the +error states. Pass back the position in the pattern so that it can be displayed +to the user for diagnosing the error. */ + +FAILED: +*ptrptr = ptr; +return FALSE; +} + + + + +/************************************************* +* Compile sequence of alternatives * +*************************************************/ + +/* On entry, ptr is pointing past the bracket character, but on return it +points to the closing bracket, or vertical bar, or end of string. The code +variable is pointing at the byte into which the BRA operator has been stored. +This function is used during the pre-compile phase when we are trying to find +out the amount of memory needed, as well as during the real compile phase. The +value of lengthptr distinguishes the two phases. + +Arguments: + options option bits, including any changes for this subpattern + codeptr -> the address of the current code pointer + ptrptr -> the address of the current pattern pointer + errorcodeptr -> pointer to error code variable + lookbehind TRUE if this is a lookbehind assertion + reset_bracount TRUE to reset the count for each branch + skipbytes skip this many bytes at start (for brackets and OP_COND) + cond_depth depth of nesting for conditional subpatterns + firstcharptr place to put the first required character, or a negative number + reqcharptr place to put the last required character, or a negative number + bcptr pointer to the chain of currently open branches + cd points to the data block with tables pointers etc. + lengthptr NULL during the real compile phase + points to length accumulator during pre-compile phase + +Returns: TRUE on success +*/ + +static BOOL +compile_regex(int options, pcre_uchar **codeptr, const pcre_uchar **ptrptr, + int *errorcodeptr, BOOL lookbehind, BOOL reset_bracount, int skipbytes, + int cond_depth, pcre_int32 *firstcharptr, pcre_int32 *reqcharptr, + branch_chain *bcptr, compile_data *cd, int *lengthptr) +{ +const pcre_uchar *ptr = *ptrptr; +pcre_uchar *code = *codeptr; +pcre_uchar *last_branch = code; +pcre_uchar *start_bracket = code; +pcre_uchar *reverse_count = NULL; +open_capitem capitem; +int capnumber = 0; +pcre_int32 firstchar, reqchar; +pcre_int32 branchfirstchar, branchreqchar; +int length; +int orig_bracount; +int max_bracount; +branch_chain bc; + +bc.outer = bcptr; +bc.current_branch = code; + +firstchar = reqchar = REQ_UNSET; + +/* Accumulate the length for use in the pre-compile phase. Start with the +length of the BRA and KET and any extra bytes that are required at the +beginning. We accumulate in a local variable to save frequent testing of +lenthptr for NULL. We cannot do this by looking at the value of code at the +start and end of each alternative, because compiled items are discarded during +the pre-compile phase so that the work space is not exceeded. */ + +length = 2 + 2*LINK_SIZE + skipbytes; + +/* WARNING: If the above line is changed for any reason, you must also change +the code that abstracts option settings at the start of the pattern and makes +them global. It tests the value of length for (2 + 2*LINK_SIZE) in the +pre-compile phase to find out whether anything has yet been compiled or not. */ + +/* If this is a capturing subpattern, add to the chain of open capturing items +so that we can detect them if (*ACCEPT) is encountered. This is also used to +detect groups that contain recursive back references to themselves. Note that +only OP_CBRA need be tested here; changing this opcode to one of its variants, +e.g. OP_SCBRAPOS, happens later, after the group has been compiled. */ + +if (*code == OP_CBRA) + { + capnumber = GET2(code, 1 + LINK_SIZE); + capitem.number = capnumber; + capitem.next = cd->open_caps; + capitem.flag = FALSE; + cd->open_caps = &capitem; + } + +/* Offset is set zero to mark that this bracket is still open */ + +PUT(code, 1, 0); +code += 1 + LINK_SIZE + skipbytes; + +/* Loop for each alternative branch */ + +orig_bracount = max_bracount = cd->bracount; +for (;;) + { + /* For a (?| group, reset the capturing bracket count so that each branch + uses the same numbers. */ + + if (reset_bracount) cd->bracount = orig_bracount; + + /* Set up dummy OP_REVERSE if lookbehind assertion */ + + if (lookbehind) + { + *code++ = OP_REVERSE; + reverse_count = code; + PUTINC(code, 0, 0); + length += 1 + LINK_SIZE; + } + + /* Now compile the branch; in the pre-compile phase its length gets added + into the length. */ + + if (!compile_branch(&options, &code, &ptr, errorcodeptr, &branchfirstchar, + &branchreqchar, &bc, cond_depth, cd, + (lengthptr == NULL)? NULL : &length)) + { + *ptrptr = ptr; + return FALSE; + } + + /* Keep the highest bracket count in case (?| was used and some branch + has fewer than the rest. */ + + if (cd->bracount > max_bracount) max_bracount = cd->bracount; + + /* In the real compile phase, there is some post-processing to be done. */ + + if (lengthptr == NULL) + { + /* If this is the first branch, the firstchar and reqchar values for the + branch become the values for the regex. */ + + if (*last_branch != OP_ALT) + { + firstchar = branchfirstchar; + reqchar = branchreqchar; + } + + /* If this is not the first branch, the first char and reqchar have to + match the values from all the previous branches, except that if the + previous value for reqchar didn't have REQ_VARY set, it can still match, + and we set REQ_VARY for the regex. */ + + else + { + /* If we previously had a firstchar, but it doesn't match the new branch, + we have to abandon the firstchar for the regex, but if there was + previously no reqchar, it takes on the value of the old firstchar. */ + + if (firstchar >= 0 && firstchar != branchfirstchar) + { + if (reqchar < 0) reqchar = firstchar; + firstchar = REQ_NONE; + } + + /* If we (now or from before) have no firstchar, a firstchar from the + branch becomes a reqchar if there isn't a branch reqchar. */ + + if (firstchar < 0 && branchfirstchar >= 0 && branchreqchar < 0) + branchreqchar = branchfirstchar; + + /* Now ensure that the reqchars match */ + + if ((reqchar & ~REQ_VARY) != (branchreqchar & ~REQ_VARY)) + reqchar = REQ_NONE; + else reqchar |= branchreqchar; /* To "or" REQ_VARY */ + } + + /* If lookbehind, check that this branch matches a fixed-length string, and + put the length into the OP_REVERSE item. Temporarily mark the end of the + branch with OP_END. If the branch contains OP_RECURSE, the result is -3 + because there may be forward references that we can't check here. Set a + flag to cause another lookbehind check at the end. Why not do it all at the + end? Because common, erroneous checks are picked up here and the offset of + the problem can be shown. */ + + if (lookbehind) + { + int fixed_length; + *code = OP_END; + fixed_length = find_fixedlength(last_branch, (options & PCRE_UTF8) != 0, + FALSE, cd); + DPRINTF(("fixed length = %d\n", fixed_length)); + if (fixed_length == -3) + { + cd->check_lookbehind = TRUE; + } + else if (fixed_length < 0) + { + *errorcodeptr = (fixed_length == -2)? ERR36 : + (fixed_length == -4)? ERR70: ERR25; + *ptrptr = ptr; + return FALSE; + } + else { PUT(reverse_count, 0, fixed_length); } + } + } + + /* Reached end of expression, either ')' or end of pattern. In the real + compile phase, go back through the alternative branches and reverse the chain + of offsets, with the field in the BRA item now becoming an offset to the + first alternative. If there are no alternatives, it points to the end of the + group. The length in the terminating ket is always the length of the whole + bracketed item. Return leaving the pointer at the terminating char. */ + + if (*ptr != CHAR_VERTICAL_LINE) + { + if (lengthptr == NULL) + { + int branch_length = (int)(code - last_branch); + do + { + int prev_length = GET(last_branch, 1); + PUT(last_branch, 1, branch_length); + branch_length = prev_length; + last_branch -= branch_length; + } + while (branch_length > 0); + } + + /* Fill in the ket */ + + *code = OP_KET; + PUT(code, 1, (int)(code - start_bracket)); + code += 1 + LINK_SIZE; + + /* If it was a capturing subpattern, check to see if it contained any + recursive back references. If so, we must wrap it in atomic brackets. + In any event, remove the block from the chain. */ + + if (capnumber > 0) + { + if (cd->open_caps->flag) + { + memmove(start_bracket + 1 + LINK_SIZE, start_bracket, + IN_UCHARS(code - start_bracket)); + *start_bracket = OP_ONCE; + code += 1 + LINK_SIZE; + PUT(start_bracket, 1, (int)(code - start_bracket)); + *code = OP_KET; + PUT(code, 1, (int)(code - start_bracket)); + code += 1 + LINK_SIZE; + length += 2 + 2*LINK_SIZE; + } + cd->open_caps = cd->open_caps->next; + } + + /* Retain the highest bracket number, in case resetting was used. */ + + cd->bracount = max_bracount; + + /* Set values to pass back */ + + *codeptr = code; + *ptrptr = ptr; + *firstcharptr = firstchar; + *reqcharptr = reqchar; + if (lengthptr != NULL) + { + if (OFLOW_MAX - *lengthptr < length) + { + *errorcodeptr = ERR20; + return FALSE; + } + *lengthptr += length; + } + return TRUE; + } + + /* Another branch follows. In the pre-compile phase, we can move the code + pointer back to where it was for the start of the first branch. (That is, + pretend that each branch is the only one.) + + In the real compile phase, insert an ALT node. Its length field points back + to the previous branch while the bracket remains open. At the end the chain + is reversed. It's done like this so that the start of the bracket has a + zero offset until it is closed, making it possible to detect recursion. */ + + if (lengthptr != NULL) + { + code = *codeptr + 1 + LINK_SIZE + skipbytes; + length += 1 + LINK_SIZE; + } + else + { + *code = OP_ALT; + PUT(code, 1, (int)(code - last_branch)); + bc.current_branch = last_branch = code; + code += 1 + LINK_SIZE; + } + + ptr++; + } +/* Control never reaches here */ +} + + + + +/************************************************* +* Check for anchored expression * +*************************************************/ + +/* Try to find out if this is an anchored regular expression. Consider each +alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket +all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then +it's anchored. However, if this is a multiline pattern, then only OP_SOD will +be found, because ^ generates OP_CIRCM in that mode. + +We can also consider a regex to be anchored if OP_SOM starts all its branches. +This is the code for \G, which means "match at start of match position, taking +into account the match offset". + +A branch is also implicitly anchored if it starts with .* and DOTALL is set, +because that will try the rest of the pattern at all possible matching points, +so there is no point trying again.... er .... + +.... except when the .* appears inside capturing parentheses, and there is a +subsequent back reference to those parentheses. We haven't enough information +to catch that case precisely. + +At first, the best we could do was to detect when .* was in capturing brackets +and the highest back reference was greater than or equal to that level. +However, by keeping a bitmap of the first 31 back references, we can catch some +of the more common cases more precisely. + +Arguments: + code points to start of expression (the bracket) + bracket_map a bitmap of which brackets we are inside while testing; this + handles up to substring 31; after that we just have to take + the less precise approach + backref_map the back reference bitmap + +Returns: TRUE or FALSE +*/ + +static BOOL +is_anchored(register const pcre_uchar *code, unsigned int bracket_map, + unsigned int backref_map) +{ +do { + const pcre_uchar *scode = first_significant_code( + code + PRIV(OP_lengths)[*code], FALSE); + register int op = *scode; + + /* Non-capturing brackets */ + + if (op == OP_BRA || op == OP_BRAPOS || + op == OP_SBRA || op == OP_SBRAPOS) + { + if (!is_anchored(scode, bracket_map, backref_map)) return FALSE; + } + + /* Capturing brackets */ + + else if (op == OP_CBRA || op == OP_CBRAPOS || + op == OP_SCBRA || op == OP_SCBRAPOS) + { + int n = GET2(scode, 1+LINK_SIZE); + int new_map = bracket_map | ((n < 32)? (1 << n) : 1); + if (!is_anchored(scode, new_map, backref_map)) return FALSE; + } + + /* Other brackets */ + + else if (op == OP_ASSERT || op == OP_ONCE || op == OP_ONCE_NC || + op == OP_COND) + { + if (!is_anchored(scode, bracket_map, backref_map)) return FALSE; + } + + /* .* is not anchored unless DOTALL is set (which generates OP_ALLANY) and + it isn't in brackets that are or may be referenced. */ + + else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR || + op == OP_TYPEPOSSTAR)) + { + if (scode[1] != OP_ALLANY || (bracket_map & backref_map) != 0) + return FALSE; + } + + /* Check for explicit anchoring */ + + else if (op != OP_SOD && op != OP_SOM && op != OP_CIRC) return FALSE; + code += GET(code, 1); + } +while (*code == OP_ALT); /* Loop for each alternative */ +return TRUE; +} + + + +/************************************************* +* Check for starting with ^ or .* * +*************************************************/ + +/* This is called to find out if every branch starts with ^ or .* so that +"first char" processing can be done to speed things up in multiline +matching and for non-DOTALL patterns that start with .* (which must start at +the beginning or after \n). As in the case of is_anchored() (see above), we +have to take account of back references to capturing brackets that contain .* +because in that case we can't make the assumption. + +Arguments: + code points to start of expression (the bracket) + bracket_map a bitmap of which brackets we are inside while testing; this + handles up to substring 31; after that we just have to take + the less precise approach + backref_map the back reference bitmap + +Returns: TRUE or FALSE +*/ + +static BOOL +is_startline(const pcre_uchar *code, unsigned int bracket_map, + unsigned int backref_map) +{ +do { + const pcre_uchar *scode = first_significant_code( + code + PRIV(OP_lengths)[*code], FALSE); + register int op = *scode; + + /* If we are at the start of a conditional assertion group, *both* the + conditional assertion *and* what follows the condition must satisfy the test + for start of line. Other kinds of condition fail. Note that there may be an + auto-callout at the start of a condition. */ + + if (op == OP_COND) + { + scode += 1 + LINK_SIZE; + if (*scode == OP_CALLOUT) scode += PRIV(OP_lengths)[OP_CALLOUT]; + switch (*scode) + { + case OP_CREF: + case OP_NCREF: + case OP_RREF: + case OP_NRREF: + case OP_DEF: + return FALSE; + + default: /* Assertion */ + if (!is_startline(scode, bracket_map, backref_map)) return FALSE; + do scode += GET(scode, 1); while (*scode == OP_ALT); + scode += 1 + LINK_SIZE; + break; + } + scode = first_significant_code(scode, FALSE); + op = *scode; + } + + /* Non-capturing brackets */ + + if (op == OP_BRA || op == OP_BRAPOS || + op == OP_SBRA || op == OP_SBRAPOS) + { + if (!is_startline(scode, bracket_map, backref_map)) return FALSE; + } + + /* Capturing brackets */ + + else if (op == OP_CBRA || op == OP_CBRAPOS || + op == OP_SCBRA || op == OP_SCBRAPOS) + { + int n = GET2(scode, 1+LINK_SIZE); + int new_map = bracket_map | ((n < 32)? (1 << n) : 1); + if (!is_startline(scode, new_map, backref_map)) return FALSE; + } + + /* Other brackets */ + + else if (op == OP_ASSERT || op == OP_ONCE || op == OP_ONCE_NC) + { + if (!is_startline(scode, bracket_map, backref_map)) return FALSE; + } + + /* .* means "start at start or after \n" if it isn't in brackets that + may be referenced. */ + + else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR || op == OP_TYPEPOSSTAR) + { + if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE; + } + + /* Check for explicit circumflex */ + + else if (op != OP_CIRC && op != OP_CIRCM) return FALSE; + + /* Move on to the next alternative */ + + code += GET(code, 1); + } +while (*code == OP_ALT); /* Loop for each alternative */ +return TRUE; +} + + + +/************************************************* +* Check for asserted fixed first char * +*************************************************/ + +/* During compilation, the "first char" settings from forward assertions are +discarded, because they can cause conflicts with actual literals that follow. +However, if we end up without a first char setting for an unanchored pattern, +it is worth scanning the regex to see if there is an initial asserted first +char. If all branches start with the same asserted char, or with a bracket all +of whose alternatives start with the same asserted char (recurse ad lib), then +we return that char, otherwise -1. + +Arguments: + code points to start of expression (the bracket) + inassert TRUE if in an assertion + +Returns: -1 or the fixed first char +*/ + +static int +find_firstassertedchar(const pcre_uchar *code, BOOL inassert) +{ +register int c = -1; +do { + int d; + int xl = (*code == OP_CBRA || *code == OP_SCBRA || + *code == OP_CBRAPOS || *code == OP_SCBRAPOS)? IMM2_SIZE:0; + const pcre_uchar *scode = first_significant_code(code + 1+LINK_SIZE + xl, + TRUE); + register int op = *scode; + + switch(op) + { + default: + return -1; + + case OP_BRA: + case OP_BRAPOS: + case OP_CBRA: + case OP_SCBRA: + case OP_CBRAPOS: + case OP_SCBRAPOS: + case OP_ASSERT: + case OP_ONCE: + case OP_ONCE_NC: + case OP_COND: + if ((d = find_firstassertedchar(scode, op == OP_ASSERT)) < 0) + return -1; + if (c < 0) c = d; else if (c != d) return -1; + break; + + case OP_EXACT: + scode += IMM2_SIZE; + /* Fall through */ + + case OP_CHAR: + case OP_PLUS: + case OP_MINPLUS: + case OP_POSPLUS: + if (!inassert) return -1; + if (c < 0) c = scode[1]; + else if (c != scode[1]) return -1; + break; + + case OP_EXACTI: + scode += IMM2_SIZE; + /* Fall through */ + + case OP_CHARI: + case OP_PLUSI: + case OP_MINPLUSI: + case OP_POSPLUSI: + if (!inassert) return -1; + if (c < 0) c = scode[1] | REQ_CASELESS; + else if (c != scode[1]) return -1; + break; + } + + code += GET(code, 1); + } +while (*code == OP_ALT); +return c; +} + + + +/************************************************* +* Compile a Regular Expression * +*************************************************/ + +/* This function takes a string and returns a pointer to a block of store +holding a compiled version of the expression. The original API for this +function had no error code return variable; it is retained for backwards +compatibility. The new function is given a new name. + +Arguments: + pattern the regular expression + options various option bits + errorcodeptr pointer to error code variable (pcre_compile2() only) + can be NULL if you don't want a code value + errorptr pointer to pointer to error text + erroroffset ptr offset in pattern where error was detected + tables pointer to character tables or NULL + +Returns: pointer to compiled data block, or NULL on error, + with errorptr and erroroffset set +*/ + +#ifdef COMPILE_PCRE8 +PCRE_EXP_DEFN pcre * PCRE_CALL_CONVENTION +pcre_compile(const char *pattern, int options, const char **errorptr, + int *erroroffset, const unsigned char *tables) +#else +PCRE_EXP_DEFN pcre16 * PCRE_CALL_CONVENTION +pcre16_compile(PCRE_SPTR16 pattern, int options, const char **errorptr, + int *erroroffset, const unsigned char *tables) +#endif +{ +#ifdef COMPILE_PCRE8 +return pcre_compile2(pattern, options, NULL, errorptr, erroroffset, tables); +#else +return pcre16_compile2(pattern, options, NULL, errorptr, erroroffset, tables); +#endif +} + + +#ifdef COMPILE_PCRE8 +PCRE_EXP_DEFN pcre * PCRE_CALL_CONVENTION +pcre_compile2(const char *pattern, int options, int *errorcodeptr, + const char **errorptr, int *erroroffset, const unsigned char *tables) +#else +PCRE_EXP_DEFN pcre16 * PCRE_CALL_CONVENTION +pcre16_compile2(PCRE_SPTR16 pattern, int options, int *errorcodeptr, + const char **errorptr, int *erroroffset, const unsigned char *tables) +#endif +{ +REAL_PCRE *re; +int length = 1; /* For final END opcode */ +pcre_int32 firstchar, reqchar; +int newline; +int errorcode = 0; +int skipatstart = 0; +BOOL utf; +size_t size; +pcre_uchar *code; +const pcre_uchar *codestart; +const pcre_uchar *ptr; +compile_data compile_block; +compile_data *cd = &compile_block; + +/* This space is used for "compiling" into during the first phase, when we are +computing the amount of memory that is needed. Compiled items are thrown away +as soon as possible, so that a fairly large buffer should be sufficient for +this purpose. The same space is used in the second phase for remembering where +to fill in forward references to subpatterns. That may overflow, in which case +new memory is obtained from malloc(). */ + +pcre_uchar cworkspace[COMPILE_WORK_SIZE]; + +/* Set this early so that early errors get offset 0. */ + +ptr = (const pcre_uchar *)pattern; + +/* We can't pass back an error message if errorptr is NULL; I guess the best we +can do is just return NULL, but we can set a code value if there is a code +pointer. */ + +if (errorptr == NULL) + { + if (errorcodeptr != NULL) *errorcodeptr = 99; + return NULL; + } + +*errorptr = NULL; +if (errorcodeptr != NULL) *errorcodeptr = ERR0; + +/* However, we can give a message for this error */ + +if (erroroffset == NULL) + { + errorcode = ERR16; + goto PCRE_EARLY_ERROR_RETURN2; + } + +*erroroffset = 0; + +/* Set up pointers to the individual character tables */ + +if (tables == NULL) tables = PRIV(default_tables); +cd->lcc = tables + lcc_offset; +cd->fcc = tables + fcc_offset; +cd->cbits = tables + cbits_offset; +cd->ctypes = tables + ctypes_offset; + +/* Check that all undefined public option bits are zero */ + +if ((options & ~PUBLIC_COMPILE_OPTIONS) != 0) + { + errorcode = ERR17; + goto PCRE_EARLY_ERROR_RETURN; + } + +/* Check for global one-time settings at the start of the pattern, and remember +the offset for later. */ + +while (ptr[skipatstart] == CHAR_LEFT_PARENTHESIS && + ptr[skipatstart+1] == CHAR_ASTERISK) + { + int newnl = 0; + int newbsr = 0; + +#ifdef COMPILE_PCRE8 + if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_UTF_RIGHTPAR, 5) == 0) + { skipatstart += 7; options |= PCRE_UTF8; continue; } +#endif +#ifdef COMPILE_PCRE16 + if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_UTF_RIGHTPAR, 6) == 0) + { skipatstart += 8; options |= PCRE_UTF16; continue; } +#endif + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_UCP_RIGHTPAR, 4) == 0) + { skipatstart += 6; options |= PCRE_UCP; continue; } + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_NO_START_OPT_RIGHTPAR, 13) == 0) + { skipatstart += 15; options |= PCRE_NO_START_OPTIMIZE; continue; } + + if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_CR_RIGHTPAR, 3) == 0) + { skipatstart += 5; newnl = PCRE_NEWLINE_CR; } + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_LF_RIGHTPAR, 3) == 0) + { skipatstart += 5; newnl = PCRE_NEWLINE_LF; } + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_CRLF_RIGHTPAR, 5) == 0) + { skipatstart += 7; newnl = PCRE_NEWLINE_CR + PCRE_NEWLINE_LF; } + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_ANY_RIGHTPAR, 4) == 0) + { skipatstart += 6; newnl = PCRE_NEWLINE_ANY; } + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_ANYCRLF_RIGHTPAR, 8) == 0) + { skipatstart += 10; newnl = PCRE_NEWLINE_ANYCRLF; } + + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_BSR_ANYCRLF_RIGHTPAR, 12) == 0) + { skipatstart += 14; newbsr = PCRE_BSR_ANYCRLF; } + else if (STRNCMP_UC_C8(ptr+skipatstart+2, STRING_BSR_UNICODE_RIGHTPAR, 12) == 0) + { skipatstart += 14; newbsr = PCRE_BSR_UNICODE; } + + if (newnl != 0) + options = (options & ~PCRE_NEWLINE_BITS) | newnl; + else if (newbsr != 0) + options = (options & ~(PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) | newbsr; + else break; + } + +/* PCRE_UTF16 has the same value as PCRE_UTF8. */ +utf = (options & PCRE_UTF8) != 0; + +/* Can't support UTF unless PCRE has been compiled to include the code. The +return of an error code from PRIV(valid_utf)() is a new feature, introduced in +release 8.13. It is passed back from pcre_[dfa_]exec(), but at the moment is +not used here. */ + +#ifdef SUPPORT_UTF +if (utf && (options & PCRE_NO_UTF8_CHECK) == 0 && + (errorcode = PRIV(valid_utf)((PCRE_PUCHAR)pattern, -1, erroroffset)) != 0) + { +#ifdef COMPILE_PCRE8 + errorcode = ERR44; +#else + errorcode = ERR74; +#endif + goto PCRE_EARLY_ERROR_RETURN2; + } +#else +if (utf) + { + errorcode = ERR32; + goto PCRE_EARLY_ERROR_RETURN; + } +#endif + +/* Can't support UCP unless PCRE has been compiled to include the code. */ + +#ifndef SUPPORT_UCP +if ((options & PCRE_UCP) != 0) + { + errorcode = ERR67; + goto PCRE_EARLY_ERROR_RETURN; + } +#endif + +/* Check validity of \R options. */ + +if ((options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) == + (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) + { + errorcode = ERR56; + goto PCRE_EARLY_ERROR_RETURN; + } + +/* Handle different types of newline. The three bits give seven cases. The +current code allows for fixed one- or two-byte sequences, plus "any" and +"anycrlf". */ + +switch (options & PCRE_NEWLINE_BITS) + { + case 0: newline = NEWLINE; break; /* Build-time default */ + case PCRE_NEWLINE_CR: newline = CHAR_CR; break; + case PCRE_NEWLINE_LF: newline = CHAR_NL; break; + case PCRE_NEWLINE_CR+ + PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break; + case PCRE_NEWLINE_ANY: newline = -1; break; + case PCRE_NEWLINE_ANYCRLF: newline = -2; break; + default: errorcode = ERR56; goto PCRE_EARLY_ERROR_RETURN; + } + +if (newline == -2) + { + cd->nltype = NLTYPE_ANYCRLF; + } +else if (newline < 0) + { + cd->nltype = NLTYPE_ANY; + } +else + { + cd->nltype = NLTYPE_FIXED; + if (newline > 255) + { + cd->nllen = 2; + cd->nl[0] = (newline >> 8) & 255; + cd->nl[1] = newline & 255; + } + else + { + cd->nllen = 1; + cd->nl[0] = newline; + } + } + +/* Maximum back reference and backref bitmap. The bitmap records up to 31 back +references to help in deciding whether (.*) can be treated as anchored or not. +*/ + +cd->top_backref = 0; +cd->backref_map = 0; + +/* Reflect pattern for debugging output */ + +DPRINTF(("------------------------------------------------------------------\n")); +#ifdef PCRE_DEBUG +print_puchar(stdout, (PCRE_PUCHAR)pattern); +#endif +DPRINTF(("\n")); + +/* Pretend to compile the pattern while actually just accumulating the length +of memory required. This behaviour is triggered by passing a non-NULL final +argument to compile_regex(). We pass a block of workspace (cworkspace) for it +to compile parts of the pattern into; the compiled code is discarded when it is +no longer needed, so hopefully this workspace will never overflow, though there +is a test for its doing so. */ + +cd->bracount = cd->final_bracount = 0; +cd->names_found = 0; +cd->name_entry_size = 0; +cd->name_table = NULL; +cd->start_code = cworkspace; +cd->hwm = cworkspace; +cd->start_workspace = cworkspace; +cd->workspace_size = COMPILE_WORK_SIZE; +cd->start_pattern = (const pcre_uchar *)pattern; +cd->end_pattern = (const pcre_uchar *)(pattern + STRLEN_UC((const pcre_uchar *)pattern)); +cd->req_varyopt = 0; +cd->assert_depth = 0; +cd->external_options = options; +cd->external_flags = 0; +cd->open_caps = NULL; + +/* Now do the pre-compile. On error, errorcode will be set non-zero, so we +don't need to look at the result of the function here. The initial options have +been put into the cd block so that they can be changed if an option setting is +found within the regex right at the beginning. Bringing initial option settings +outside can help speed up starting point checks. */ + +ptr += skipatstart; +code = cworkspace; +*code = OP_BRA; +(void)compile_regex(cd->external_options, &code, &ptr, &errorcode, FALSE, + FALSE, 0, 0, &firstchar, &reqchar, NULL, cd, &length); +if (errorcode != 0) goto PCRE_EARLY_ERROR_RETURN; + +DPRINTF(("end pre-compile: length=%d workspace=%d\n", length, + (int)(cd->hwm - cworkspace))); + +if (length > MAX_PATTERN_SIZE) + { + errorcode = ERR20; + goto PCRE_EARLY_ERROR_RETURN; + } + +/* Compute the size of data block needed and get it, either from malloc or +externally provided function. Integer overflow should no longer be possible +because nowadays we limit the maximum value of cd->names_found and +cd->name_entry_size. */ + +size = sizeof(REAL_PCRE) + (length + cd->names_found * cd->name_entry_size) * sizeof(pcre_uchar); +re = (REAL_PCRE *)(PUBL(malloc))(size); + +if (re == NULL) + { + errorcode = ERR21; + goto PCRE_EARLY_ERROR_RETURN; + } + +/* Put in the magic number, and save the sizes, initial options, internal +flags, and character table pointer. NULL is used for the default character +tables. The nullpad field is at the end; it's there to help in the case when a +regex compiled on a system with 4-byte pointers is run on another with 8-byte +pointers. */ + +re->magic_number = MAGIC_NUMBER; +re->size = (int)size; +re->options = cd->external_options; +re->flags = cd->external_flags; +re->dummy1 = 0; +re->first_char = 0; +re->req_char = 0; +re->name_table_offset = sizeof(REAL_PCRE) / sizeof(pcre_uchar); +re->name_entry_size = cd->name_entry_size; +re->name_count = cd->names_found; +re->ref_count = 0; +re->tables = (tables == PRIV(default_tables))? NULL : tables; +re->nullpad = NULL; + +/* The starting points of the name/number translation table and of the code are +passed around in the compile data block. The start/end pattern and initial +options are already set from the pre-compile phase, as is the name_entry_size +field. Reset the bracket count and the names_found field. Also reset the hwm +field; this time it's used for remembering forward references to subpatterns. +*/ + +cd->final_bracount = cd->bracount; /* Save for checking forward references */ +cd->assert_depth = 0; +cd->bracount = 0; +cd->names_found = 0; +cd->name_table = (pcre_uchar *)re + re->name_table_offset; +codestart = cd->name_table + re->name_entry_size * re->name_count; +cd->start_code = codestart; +cd->hwm = (pcre_uchar *)(cd->start_workspace); +cd->req_varyopt = 0; +cd->had_accept = FALSE; +cd->check_lookbehind = FALSE; +cd->open_caps = NULL; + +/* Set up a starting, non-extracting bracket, then compile the expression. On +error, errorcode will be set non-zero, so we don't need to look at the result +of the function here. */ + +ptr = (const pcre_uchar *)pattern + skipatstart; +code = (pcre_uchar *)codestart; +*code = OP_BRA; +(void)compile_regex(re->options, &code, &ptr, &errorcode, FALSE, FALSE, 0, 0, + &firstchar, &reqchar, NULL, cd, NULL); +re->top_bracket = cd->bracount; +re->top_backref = cd->top_backref; +re->flags = cd->external_flags | PCRE_MODE; + +if (cd->had_accept) reqchar = REQ_NONE; /* Must disable after (*ACCEPT) */ + +/* If not reached end of pattern on success, there's an excess bracket. */ + +if (errorcode == 0 && *ptr != 0) errorcode = ERR22; + +/* Fill in the terminating state and check for disastrous overflow, but +if debugging, leave the test till after things are printed out. */ + +*code++ = OP_END; + +#ifndef PCRE_DEBUG +if (code - codestart > length) errorcode = ERR23; +#endif + +/* Fill in any forward references that are required. There may be repeated +references; optimize for them, as searching a large regex takes time. */ + +if (cd->hwm > cd->start_workspace) + { + int prev_recno = -1; + const pcre_uchar *groupptr = NULL; + while (errorcode == 0 && cd->hwm > cd->start_workspace) + { + int offset, recno; + cd->hwm -= LINK_SIZE; + offset = GET(cd->hwm, 0); + recno = GET(codestart, offset); + if (recno != prev_recno) + { + groupptr = PRIV(find_bracket)(codestart, utf, recno); + prev_recno = recno; + } + if (groupptr == NULL) errorcode = ERR53; + else PUT(((pcre_uchar *)codestart), offset, (int)(groupptr - codestart)); + } + } + +/* If the workspace had to be expanded, free the new memory. */ + +if (cd->workspace_size > COMPILE_WORK_SIZE) + (PUBL(free))((void *)cd->start_workspace); + +/* Give an error if there's back reference to a non-existent capturing +subpattern. */ + +if (errorcode == 0 && re->top_backref > re->top_bracket) errorcode = ERR15; + +/* If there were any lookbehind assertions that contained OP_RECURSE +(recursions or subroutine calls), a flag is set for them to be checked here, +because they may contain forward references. Actual recursions can't be fixed +length, but subroutine calls can. It is done like this so that those without +OP_RECURSE that are not fixed length get a diagnosic with a useful offset. The +exceptional ones forgo this. We scan the pattern to check that they are fixed +length, and set their lengths. */ + +if (cd->check_lookbehind) + { + pcre_uchar *cc = (pcre_uchar *)codestart; + + /* Loop, searching for OP_REVERSE items, and process those that do not have + their length set. (Actually, it will also re-process any that have a length + of zero, but that is a pathological case, and it does no harm.) When we find + one, we temporarily terminate the branch it is in while we scan it. */ + + for (cc = (pcre_uchar *)PRIV(find_bracket)(codestart, utf, -1); + cc != NULL; + cc = (pcre_uchar *)PRIV(find_bracket)(cc, utf, -1)) + { + if (GET(cc, 1) == 0) + { + int fixed_length; + pcre_uchar *be = cc - 1 - LINK_SIZE + GET(cc, -LINK_SIZE); + int end_op = *be; + *be = OP_END; + fixed_length = find_fixedlength(cc, (re->options & PCRE_UTF8) != 0, TRUE, + cd); + *be = end_op; + DPRINTF(("fixed length = %d\n", fixed_length)); + if (fixed_length < 0) + { + errorcode = (fixed_length == -2)? ERR36 : + (fixed_length == -4)? ERR70 : ERR25; + break; + } + PUT(cc, 1, fixed_length); + } + cc += 1 + LINK_SIZE; + } + } + +/* Failed to compile, or error while post-processing */ + +if (errorcode != 0) + { + (PUBL(free))(re); + PCRE_EARLY_ERROR_RETURN: + *erroroffset = (int)(ptr - (const pcre_uchar *)pattern); + PCRE_EARLY_ERROR_RETURN2: + *errorptr = find_error_text(errorcode); + if (errorcodeptr != NULL) *errorcodeptr = errorcode; + return NULL; + } + +/* If the anchored option was not passed, set the flag if we can determine that +the pattern is anchored by virtue of ^ characters or \A or anything else (such +as starting with .* when DOTALL is set). + +Otherwise, if we know what the first byte has to be, save it, because that +speeds up unanchored matches no end. If not, see if we can set the +PCRE_STARTLINE flag. This is helpful for multiline matches when all branches +start with ^. and also when all branches start with .* for non-DOTALL matches. +*/ + +if ((re->options & PCRE_ANCHORED) == 0) + { + if (is_anchored(codestart, 0, cd->backref_map)) + re->options |= PCRE_ANCHORED; + else + { + if (firstchar < 0) + firstchar = find_firstassertedchar(codestart, FALSE); + if (firstchar >= 0) /* Remove caseless flag for non-caseable chars */ + { +#ifdef COMPILE_PCRE8 + re->first_char = firstchar & 0xff; +#else +#ifdef COMPILE_PCRE16 + re->first_char = firstchar & 0xffff; +#endif +#endif + if ((firstchar & REQ_CASELESS) != 0) + { +#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) + /* We ignore non-ASCII first chars in 8 bit mode. */ + if (utf) + { + if (re->first_char < 128) + { + if (cd->fcc[re->first_char] != re->first_char) + re->flags |= PCRE_FCH_CASELESS; + } + else if (UCD_OTHERCASE(re->first_char) != re->first_char) + re->flags |= PCRE_FCH_CASELESS; + } + else +#endif + if (MAX_255(re->first_char) + && cd->fcc[re->first_char] != re->first_char) + re->flags |= PCRE_FCH_CASELESS; + } + + re->flags |= PCRE_FIRSTSET; + } + else if (is_startline(codestart, 0, cd->backref_map)) + re->flags |= PCRE_STARTLINE; + } + } + +/* For an anchored pattern, we use the "required byte" only if it follows a +variable length item in the regex. Remove the caseless flag for non-caseable +bytes. */ + +if (reqchar >= 0 && + ((re->options & PCRE_ANCHORED) == 0 || (reqchar & REQ_VARY) != 0)) + { +#ifdef COMPILE_PCRE8 + re->req_char = reqchar & 0xff; +#else +#ifdef COMPILE_PCRE16 + re->req_char = reqchar & 0xffff; +#endif +#endif + if ((reqchar & REQ_CASELESS) != 0) + { +#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) + /* We ignore non-ASCII first chars in 8 bit mode. */ + if (utf) + { + if (re->req_char < 128) + { + if (cd->fcc[re->req_char] != re->req_char) + re->flags |= PCRE_RCH_CASELESS; + } + else if (UCD_OTHERCASE(re->req_char) != re->req_char) + re->flags |= PCRE_RCH_CASELESS; + } + else +#endif + if (MAX_255(re->req_char) && cd->fcc[re->req_char] != re->req_char) + re->flags |= PCRE_RCH_CASELESS; + } + + re->flags |= PCRE_REQCHSET; + } + +/* Print out the compiled data if debugging is enabled. This is never the +case when building a production library. */ + +#ifdef PCRE_DEBUG +printf("Length = %d top_bracket = %d top_backref = %d\n", + length, re->top_bracket, re->top_backref); + +printf("Options=%08x\n", re->options); + +if ((re->flags & PCRE_FIRSTSET) != 0) + { + pcre_uchar ch = re->first_char; + const char *caseless = + ((re->flags & PCRE_FCH_CASELESS) == 0)? "" : " (caseless)"; + if (PRINTABLE(ch)) printf("First char = %c%s\n", ch, caseless); + else printf("First char = \\x%02x%s\n", ch, caseless); + } + +if ((re->flags & PCRE_REQCHSET) != 0) + { + pcre_uchar ch = re->req_char; + const char *caseless = + ((re->flags & PCRE_RCH_CASELESS) == 0)? "" : " (caseless)"; + if (PRINTABLE(ch)) printf("Req char = %c%s\n", ch, caseless); + else printf("Req char = \\x%02x%s\n", ch, caseless); + } + +#ifdef COMPILE_PCRE8 +pcre_printint((pcre *)re, stdout, TRUE); +#else +pcre16_printint((pcre *)re, stdout, TRUE); +#endif + +/* This check is done here in the debugging case so that the code that +was compiled can be seen. */ + +if (code - codestart > length) + { + (PUBL(free))(re); + *errorptr = find_error_text(ERR23); + *erroroffset = ptr - (pcre_uchar *)pattern; + if (errorcodeptr != NULL) *errorcodeptr = ERR23; + return NULL; + } +#endif /* PCRE_DEBUG */ + +#ifdef COMPILE_PCRE8 +return (pcre *)re; +#else +return (pcre16 *)re; +#endif +} + +/* End of pcre_compile.c */ |