diff options
Diffstat (limited to 'src/3rdparty/pcre/pcre_exec.c')
| -rw-r--r-- | src/3rdparty/pcre/pcre_exec.c | 6960 |
1 files changed, 6960 insertions, 0 deletions
diff --git a/src/3rdparty/pcre/pcre_exec.c b/src/3rdparty/pcre/pcre_exec.c new file mode 100644 index 0000000000..2905808c83 --- /dev/null +++ b/src/3rdparty/pcre/pcre_exec.c @@ -0,0 +1,6960 @@ +/************************************************* +* Perl-Compatible Regular Expressions * +*************************************************/ + +/* PCRE is a library of functions to support regular expressions whose syntax +and semantics are as close as possible to those of the Perl 5 language. + + Written by Philip Hazel + Copyright (c) 1997-2012 University of Cambridge + +----------------------------------------------------------------------------- +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of the University of Cambridge nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +----------------------------------------------------------------------------- +*/ + + +/* This module contains pcre_exec(), the externally visible function that does +pattern matching using an NFA algorithm, trying to mimic Perl as closely as +possible. There are also some static supporting functions. */ + +#ifdef PCRE_HAVE_CONFIG_H +#include "config.h" +#endif + +#define NLBLOCK md /* Block containing newline information */ +#define PSSTART start_subject /* Field containing processed string start */ +#define PSEND end_subject /* Field containing processed string end */ + +#include "pcre_internal.h" + +/* Undefine some potentially clashing cpp symbols */ + +#undef min +#undef max + +/* Values for setting in md->match_function_type to indicate two special types +of call to match(). We do it this way to save on using another stack variable, +as stack usage is to be discouraged. */ + +#define MATCH_CONDASSERT 1 /* Called to check a condition assertion */ +#define MATCH_CBEGROUP 2 /* Could-be-empty unlimited repeat group */ + +/* Non-error returns from the match() function. Error returns are externally +defined PCRE_ERROR_xxx codes, which are all negative. */ + +#define MATCH_MATCH 1 +#define MATCH_NOMATCH 0 + +/* Special internal returns from the match() function. Make them sufficiently +negative to avoid the external error codes. */ + +#define MATCH_ACCEPT (-999) +#define MATCH_COMMIT (-998) +#define MATCH_KETRPOS (-997) +#define MATCH_ONCE (-996) +#define MATCH_PRUNE (-995) +#define MATCH_SKIP (-994) +#define MATCH_SKIP_ARG (-993) +#define MATCH_THEN (-992) + +/* Maximum number of ints of offset to save on the stack for recursive calls. +If the offset vector is bigger, malloc is used. This should be a multiple of 3, +because the offset vector is always a multiple of 3 long. */ + +#define REC_STACK_SAVE_MAX 30 + +/* Min and max values for the common repeats; for the maxima, 0 => infinity */ + +static const char rep_min[] = { 0, 0, 1, 1, 0, 0 }; +static const char rep_max[] = { 0, 0, 0, 0, 1, 1 }; + + + +#ifdef PCRE_DEBUG +/************************************************* +* Debugging function to print chars * +*************************************************/ + +/* Print a sequence of chars in printable format, stopping at the end of the +subject if the requested. + +Arguments: + p points to characters + length number to print + is_subject TRUE if printing from within md->start_subject + md pointer to matching data block, if is_subject is TRUE + +Returns: nothing +*/ + +static void +pchars(const pcre_uchar *p, int length, BOOL is_subject, match_data *md) +{ +unsigned int c; +if (is_subject && length > md->end_subject - p) length = md->end_subject - p; +while (length-- > 0) + if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c); +} +#endif + + + +/************************************************* +* Match a back-reference * +*************************************************/ + +/* Normally, if a back reference hasn't been set, the length that is passed is +negative, so the match always fails. However, in JavaScript compatibility mode, +the length passed is zero. Note that in caseless UTF-8 mode, the number of +subject bytes matched may be different to the number of reference bytes. + +Arguments: + offset index into the offset vector + eptr pointer into the subject + length length of reference to be matched (number of bytes) + md points to match data block + caseless TRUE if caseless + +Returns: < 0 if not matched, otherwise the number of subject bytes matched +*/ + +static int +match_ref(int offset, register PCRE_PUCHAR eptr, int length, match_data *md, + BOOL caseless) +{ +PCRE_PUCHAR eptr_start = eptr; +register PCRE_PUCHAR p = md->start_subject + md->offset_vector[offset]; + +#ifdef PCRE_DEBUG +if (eptr >= md->end_subject) + printf("matching subject <null>"); +else + { + printf("matching subject "); + pchars(eptr, length, TRUE, md); + } +printf(" against backref "); +pchars(p, length, FALSE, md); +printf("\n"); +#endif + +/* Always fail if reference not set (and not JavaScript compatible). */ + +if (length < 0) return -1; + +/* Separate the caseless case for speed. In UTF-8 mode we can only do this +properly if Unicode properties are supported. Otherwise, we can check only +ASCII characters. */ + +if (caseless) + { +#ifdef SUPPORT_UTF +#ifdef SUPPORT_UCP + if (md->utf) + { + /* Match characters up to the end of the reference. NOTE: the number of + bytes matched may differ, because there are some characters whose upper and + lower case versions code as different numbers of bytes. For example, U+023A + (2 bytes in UTF-8) is the upper case version of U+2C65 (3 bytes in UTF-8); + a sequence of 3 of the former uses 6 bytes, as does a sequence of two of + the latter. It is important, therefore, to check the length along the + reference, not along the subject (earlier code did this wrong). */ + + PCRE_PUCHAR endptr = p + length; + while (p < endptr) + { + int c, d; + if (eptr >= md->end_subject) return -1; + GETCHARINC(c, eptr); + GETCHARINC(d, p); + if (c != d && c != UCD_OTHERCASE(d)) return -1; + } + } + else +#endif +#endif + + /* The same code works when not in UTF-8 mode and in UTF-8 mode when there + is no UCP support. */ + { + if (eptr + length > md->end_subject) return -1; + while (length-- > 0) + { + if (TABLE_GET(*p, md->lcc, *p) != TABLE_GET(*eptr, md->lcc, *eptr)) return -1; + p++; + eptr++; + } + } + } + +/* In the caseful case, we can just compare the bytes, whether or not we +are in UTF-8 mode. */ + +else + { + if (eptr + length > md->end_subject) return -1; + while (length-- > 0) if (*p++ != *eptr++) return -1; + } + +return (int)(eptr - eptr_start); +} + + + +/*************************************************************************** +**************************************************************************** + RECURSION IN THE match() FUNCTION + +The match() function is highly recursive, though not every recursive call +increases the recursive depth. Nevertheless, some regular expressions can cause +it to recurse to a great depth. I was writing for Unix, so I just let it call +itself recursively. This uses the stack for saving everything that has to be +saved for a recursive call. On Unix, the stack can be large, and this works +fine. + +It turns out that on some non-Unix-like systems there are problems with +programs that use a lot of stack. (This despite the fact that every last chip +has oodles of memory these days, and techniques for extending the stack have +been known for decades.) So.... + +There is a fudge, triggered by defining NO_RECURSE, which avoids recursive +calls by keeping local variables that need to be preserved in blocks of memory +obtained from malloc() instead instead of on the stack. Macros are used to +achieve this so that the actual code doesn't look very different to what it +always used to. + +The original heap-recursive code used longjmp(). However, it seems that this +can be very slow on some operating systems. Following a suggestion from Stan +Switzer, the use of longjmp() has been abolished, at the cost of having to +provide a unique number for each call to RMATCH. There is no way of generating +a sequence of numbers at compile time in C. I have given them names, to make +them stand out more clearly. + +Crude tests on x86 Linux show a small speedup of around 5-8%. However, on +FreeBSD, avoiding longjmp() more than halves the time taken to run the standard +tests. Furthermore, not using longjmp() means that local dynamic variables +don't have indeterminate values; this has meant that the frame size can be +reduced because the result can be "passed back" by straight setting of the +variable instead of being passed in the frame. +**************************************************************************** +***************************************************************************/ + +/* Numbers for RMATCH calls. When this list is changed, the code at HEAP_RETURN +below must be updated in sync. */ + +enum { RM1=1, RM2, RM3, RM4, RM5, RM6, RM7, RM8, RM9, RM10, + RM11, RM12, RM13, RM14, RM15, RM16, RM17, RM18, RM19, RM20, + RM21, RM22, RM23, RM24, RM25, RM26, RM27, RM28, RM29, RM30, + RM31, RM32, RM33, RM34, RM35, RM36, RM37, RM38, RM39, RM40, + RM41, RM42, RM43, RM44, RM45, RM46, RM47, RM48, RM49, RM50, + RM51, RM52, RM53, RM54, RM55, RM56, RM57, RM58, RM59, RM60, + RM61, RM62, RM63, RM64, RM65, RM66 }; + +/* These versions of the macros use the stack, as normal. There are debugging +versions and production versions. Note that the "rw" argument of RMATCH isn't +actually used in this definition. */ + +#ifndef NO_RECURSE +#define REGISTER register + +#ifdef PCRE_DEBUG +#define RMATCH(ra,rb,rc,rd,re,rw) \ + { \ + printf("match() called in line %d\n", __LINE__); \ + rrc = match(ra,rb,mstart,rc,rd,re,rdepth+1); \ + printf("to line %d\n", __LINE__); \ + } +#define RRETURN(ra) \ + { \ + printf("match() returned %d from line %d ", ra, __LINE__); \ + return ra; \ + } +#else +#define RMATCH(ra,rb,rc,rd,re,rw) \ + rrc = match(ra,rb,mstart,rc,rd,re,rdepth+1) +#define RRETURN(ra) return ra +#endif + +#else + + +/* These versions of the macros manage a private stack on the heap. Note that +the "rd" argument of RMATCH isn't actually used in this definition. It's the md +argument of match(), which never changes. */ + +#define REGISTER + +#define RMATCH(ra,rb,rc,rd,re,rw)\ + {\ + heapframe *newframe = (heapframe *)(PUBL(stack_malloc))(sizeof(heapframe));\ + if (newframe == NULL) RRETURN(PCRE_ERROR_NOMEMORY);\ + frame->Xwhere = rw; \ + newframe->Xeptr = ra;\ + newframe->Xecode = rb;\ + newframe->Xmstart = mstart;\ + newframe->Xoffset_top = rc;\ + newframe->Xeptrb = re;\ + newframe->Xrdepth = frame->Xrdepth + 1;\ + newframe->Xprevframe = frame;\ + frame = newframe;\ + DPRINTF(("restarting from line %d\n", __LINE__));\ + goto HEAP_RECURSE;\ + L_##rw:\ + DPRINTF(("jumped back to line %d\n", __LINE__));\ + } + +#define RRETURN(ra)\ + {\ + heapframe *oldframe = frame;\ + frame = oldframe->Xprevframe;\ + if (oldframe != &frame_zero) (PUBL(stack_free))(oldframe);\ + if (frame != NULL)\ + {\ + rrc = ra;\ + goto HEAP_RETURN;\ + }\ + return ra;\ + } + + +/* Structure for remembering the local variables in a private frame */ + +typedef struct heapframe { + struct heapframe *Xprevframe; + + /* Function arguments that may change */ + + PCRE_PUCHAR Xeptr; + const pcre_uchar *Xecode; + PCRE_PUCHAR Xmstart; + int Xoffset_top; + eptrblock *Xeptrb; + unsigned int Xrdepth; + + /* Function local variables */ + + PCRE_PUCHAR Xcallpat; +#ifdef SUPPORT_UTF + PCRE_PUCHAR Xcharptr; +#endif + PCRE_PUCHAR Xdata; + PCRE_PUCHAR Xnext; + PCRE_PUCHAR Xpp; + PCRE_PUCHAR Xprev; + PCRE_PUCHAR Xsaved_eptr; + + recursion_info Xnew_recursive; + + BOOL Xcur_is_word; + BOOL Xcondition; + BOOL Xprev_is_word; + +#ifdef SUPPORT_UCP + int Xprop_type; + int Xprop_value; + int Xprop_fail_result; + int Xoclength; + pcre_uchar Xocchars[6]; +#endif + + int Xcodelink; + int Xctype; + unsigned int Xfc; + int Xfi; + int Xlength; + int Xmax; + int Xmin; + int Xnumber; + int Xoffset; + int Xop; + int Xsave_capture_last; + int Xsave_offset1, Xsave_offset2, Xsave_offset3; + int Xstacksave[REC_STACK_SAVE_MAX]; + + eptrblock Xnewptrb; + + /* Where to jump back to */ + + int Xwhere; + +} heapframe; + +#endif + + +/*************************************************************************** +***************************************************************************/ + + + +/************************************************* +* Match from current position * +*************************************************/ + +/* This function is called recursively in many circumstances. Whenever it +returns a negative (error) response, the outer incarnation must also return the +same response. */ + +/* These macros pack up tests that are used for partial matching, and which +appear several times in the code. We set the "hit end" flag if the pointer is +at the end of the subject and also past the start of the subject (i.e. +something has been matched). For hard partial matching, we then return +immediately. The second one is used when we already know we are past the end of +the subject. */ + +#define CHECK_PARTIAL()\ + if (md->partial != 0 && eptr >= md->end_subject && \ + eptr > md->start_used_ptr) \ + { \ + md->hitend = TRUE; \ + if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL); \ + } + +#define SCHECK_PARTIAL()\ + if (md->partial != 0 && eptr > md->start_used_ptr) \ + { \ + md->hitend = TRUE; \ + if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL); \ + } + + +/* Performance note: It might be tempting to extract commonly used fields from +the md structure (e.g. utf, end_subject) into individual variables to improve +performance. Tests using gcc on a SPARC disproved this; in the first case, it +made performance worse. + +Arguments: + eptr pointer to current character in subject + ecode pointer to current position in compiled code + mstart pointer to the current match start position (can be modified + by encountering \K) + offset_top current top pointer + md pointer to "static" info for the match + eptrb pointer to chain of blocks containing eptr at start of + brackets - for testing for empty matches + rdepth the recursion depth + +Returns: MATCH_MATCH if matched ) these values are >= 0 + MATCH_NOMATCH if failed to match ) + a negative MATCH_xxx value for PRUNE, SKIP, etc + a negative PCRE_ERROR_xxx value if aborted by an error condition + (e.g. stopped by repeated call or recursion limit) +*/ + +static int +match(REGISTER PCRE_PUCHAR eptr, REGISTER const pcre_uchar *ecode, + PCRE_PUCHAR mstart, int offset_top, match_data *md, eptrblock *eptrb, + unsigned int rdepth) +{ +/* These variables do not need to be preserved over recursion in this function, +so they can be ordinary variables in all cases. Mark some of them with +"register" because they are used a lot in loops. */ + +register int rrc; /* Returns from recursive calls */ +register int i; /* Used for loops not involving calls to RMATCH() */ +register unsigned int c; /* Character values not kept over RMATCH() calls */ +register BOOL utf; /* Local copy of UTF flag for speed */ + +BOOL minimize, possessive; /* Quantifier options */ +BOOL caseless; +int condcode; + +/* When recursion is not being used, all "local" variables that have to be +preserved over calls to RMATCH() are part of a "frame". We set up the top-level +frame on the stack here; subsequent instantiations are obtained from the heap +whenever RMATCH() does a "recursion". See the macro definitions above. Putting +the top-level on the stack rather than malloc-ing them all gives a performance +boost in many cases where there is not much "recursion". */ + +#ifdef NO_RECURSE +heapframe frame_zero; +heapframe *frame = &frame_zero; +frame->Xprevframe = NULL; /* Marks the top level */ + +/* Copy in the original argument variables */ + +frame->Xeptr = eptr; +frame->Xecode = ecode; +frame->Xmstart = mstart; +frame->Xoffset_top = offset_top; +frame->Xeptrb = eptrb; +frame->Xrdepth = rdepth; + +/* This is where control jumps back to to effect "recursion" */ + +HEAP_RECURSE: + +/* Macros make the argument variables come from the current frame */ + +#define eptr frame->Xeptr +#define ecode frame->Xecode +#define mstart frame->Xmstart +#define offset_top frame->Xoffset_top +#define eptrb frame->Xeptrb +#define rdepth frame->Xrdepth + +/* Ditto for the local variables */ + +#ifdef SUPPORT_UTF +#define charptr frame->Xcharptr +#endif +#define callpat frame->Xcallpat +#define codelink frame->Xcodelink +#define data frame->Xdata +#define next frame->Xnext +#define pp frame->Xpp +#define prev frame->Xprev +#define saved_eptr frame->Xsaved_eptr + +#define new_recursive frame->Xnew_recursive + +#define cur_is_word frame->Xcur_is_word +#define condition frame->Xcondition +#define prev_is_word frame->Xprev_is_word + +#ifdef SUPPORT_UCP +#define prop_type frame->Xprop_type +#define prop_value frame->Xprop_value +#define prop_fail_result frame->Xprop_fail_result +#define oclength frame->Xoclength +#define occhars frame->Xocchars +#endif + +#define ctype frame->Xctype +#define fc frame->Xfc +#define fi frame->Xfi +#define length frame->Xlength +#define max frame->Xmax +#define min frame->Xmin +#define number frame->Xnumber +#define offset frame->Xoffset +#define op frame->Xop +#define save_capture_last frame->Xsave_capture_last +#define save_offset1 frame->Xsave_offset1 +#define save_offset2 frame->Xsave_offset2 +#define save_offset3 frame->Xsave_offset3 +#define stacksave frame->Xstacksave + +#define newptrb frame->Xnewptrb + +/* When recursion is being used, local variables are allocated on the stack and +get preserved during recursion in the normal way. In this environment, fi and +i, and fc and c, can be the same variables. */ + +#else /* NO_RECURSE not defined */ +#define fi i +#define fc c + +/* Many of the following variables are used only in small blocks of the code. +My normal style of coding would have declared them within each of those blocks. +However, in order to accommodate the version of this code that uses an external +"stack" implemented on the heap, it is easier to declare them all here, so the +declarations can be cut out in a block. The only declarations within blocks +below are for variables that do not have to be preserved over a recursive call +to RMATCH(). */ + +#ifdef SUPPORT_UTF +const pcre_uchar *charptr; +#endif +const pcre_uchar *callpat; +const pcre_uchar *data; +const pcre_uchar *next; +PCRE_PUCHAR pp; +const pcre_uchar *prev; +PCRE_PUCHAR saved_eptr; + +recursion_info new_recursive; + +BOOL cur_is_word; +BOOL condition; +BOOL prev_is_word; + +#ifdef SUPPORT_UCP +int prop_type; +int prop_value; +int prop_fail_result; +int oclength; +pcre_uchar occhars[6]; +#endif + +int codelink; +int ctype; +int length; +int max; +int min; +int number; +int offset; +int op; +int save_capture_last; +int save_offset1, save_offset2, save_offset3; +int stacksave[REC_STACK_SAVE_MAX]; + +eptrblock newptrb; + +/* There is a special fudge for calling match() in a way that causes it to +measure the size of its basic stack frame when the stack is being used for +recursion. The second argument (ecode) being NULL triggers this behaviour. It +cannot normally ever be NULL. The return is the negated value of the frame +size. */ + +if (ecode == NULL) + { + if (rdepth == 0) + return match((PCRE_PUCHAR)&rdepth, NULL, NULL, 0, NULL, NULL, 1); + else + { + int len = (char *)&rdepth - (char *)eptr; + return (len > 0)? -len : len; + } + } +#endif /* NO_RECURSE */ + +/* To save space on the stack and in the heap frame, I have doubled up on some +of the local variables that are used only in localised parts of the code, but +still need to be preserved over recursive calls of match(). These macros define +the alternative names that are used. */ + +#define allow_zero cur_is_word +#define cbegroup condition +#define code_offset codelink +#define condassert condition +#define matched_once prev_is_word +#define foc number +#define save_mark data + +/* These statements are here to stop the compiler complaining about unitialized +variables. */ + +#ifdef SUPPORT_UCP +prop_value = 0; +prop_fail_result = 0; +#endif + + +/* This label is used for tail recursion, which is used in a few cases even +when NO_RECURSE is not defined, in order to reduce the amount of stack that is +used. Thanks to Ian Taylor for noticing this possibility and sending the +original patch. */ + +TAIL_RECURSE: + +/* OK, now we can get on with the real code of the function. Recursive calls +are specified by the macro RMATCH and RRETURN is used to return. When +NO_RECURSE is *not* defined, these just turn into a recursive call to match() +and a "return", respectively (possibly with some debugging if PCRE_DEBUG is +defined). However, RMATCH isn't like a function call because it's quite a +complicated macro. It has to be used in one particular way. This shouldn't, +however, impact performance when true recursion is being used. */ + +#ifdef SUPPORT_UTF +utf = md->utf; /* Local copy of the flag */ +#else +utf = FALSE; +#endif + +/* First check that we haven't called match() too many times, or that we +haven't exceeded the recursive call limit. */ + +if (md->match_call_count++ >= md->match_limit) RRETURN(PCRE_ERROR_MATCHLIMIT); +if (rdepth >= md->match_limit_recursion) RRETURN(PCRE_ERROR_RECURSIONLIMIT); + +/* At the start of a group with an unlimited repeat that may match an empty +string, the variable md->match_function_type is set to MATCH_CBEGROUP. It is +done this way to save having to use another function argument, which would take +up space on the stack. See also MATCH_CONDASSERT below. + +When MATCH_CBEGROUP is set, add the current subject pointer to the chain of +such remembered pointers, to be checked when we hit the closing ket, in order +to break infinite loops that match no characters. When match() is called in +other circumstances, don't add to the chain. The MATCH_CBEGROUP feature must +NOT be used with tail recursion, because the memory block that is used is on +the stack, so a new one may be required for each match(). */ + +if (md->match_function_type == MATCH_CBEGROUP) + { + newptrb.epb_saved_eptr = eptr; + newptrb.epb_prev = eptrb; + eptrb = &newptrb; + md->match_function_type = 0; + } + +/* Now start processing the opcodes. */ + +for (;;) + { + minimize = possessive = FALSE; + op = *ecode; + + switch(op) + { + case OP_MARK: + md->nomatch_mark = ecode + 2; + md->mark = NULL; /* In case previously set by assertion */ + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode] + ecode[1], offset_top, md, + eptrb, RM55); + if ((rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) && + md->mark == NULL) md->mark = ecode + 2; + + /* A return of MATCH_SKIP_ARG means that matching failed at SKIP with an + argument, and we must check whether that argument matches this MARK's + argument. It is passed back in md->start_match_ptr (an overloading of that + variable). If it does match, we reset that variable to the current subject + position and return MATCH_SKIP. Otherwise, pass back the return code + unaltered. */ + + else if (rrc == MATCH_SKIP_ARG && + STRCMP_UC_UC(ecode + 2, md->start_match_ptr) == 0) + { + md->start_match_ptr = eptr; + RRETURN(MATCH_SKIP); + } + RRETURN(rrc); + + case OP_FAIL: + RRETURN(MATCH_NOMATCH); + + /* COMMIT overrides PRUNE, SKIP, and THEN */ + + case OP_COMMIT: + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM52); + if (rrc != MATCH_NOMATCH && rrc != MATCH_PRUNE && + rrc != MATCH_SKIP && rrc != MATCH_SKIP_ARG && + rrc != MATCH_THEN) + RRETURN(rrc); + RRETURN(MATCH_COMMIT); + + /* PRUNE overrides THEN */ + + case OP_PRUNE: + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM51); + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + RRETURN(MATCH_PRUNE); + + case OP_PRUNE_ARG: + md->nomatch_mark = ecode + 2; + md->mark = NULL; /* In case previously set by assertion */ + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode] + ecode[1], offset_top, md, + eptrb, RM56); + if ((rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) && + md->mark == NULL) md->mark = ecode + 2; + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + RRETURN(MATCH_PRUNE); + + /* SKIP overrides PRUNE and THEN */ + + case OP_SKIP: + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM53); + if (rrc != MATCH_NOMATCH && rrc != MATCH_PRUNE && rrc != MATCH_THEN) + RRETURN(rrc); + md->start_match_ptr = eptr; /* Pass back current position */ + RRETURN(MATCH_SKIP); + + /* Note that, for Perl compatibility, SKIP with an argument does NOT set + nomatch_mark. There is a flag that disables this opcode when re-matching a + pattern that ended with a SKIP for which there was not a matching MARK. */ + + case OP_SKIP_ARG: + if (md->ignore_skip_arg) + { + ecode += PRIV(OP_lengths)[*ecode] + ecode[1]; + break; + } + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode] + ecode[1], offset_top, md, + eptrb, RM57); + if (rrc != MATCH_NOMATCH && rrc != MATCH_PRUNE && rrc != MATCH_THEN) + RRETURN(rrc); + + /* Pass back the current skip name by overloading md->start_match_ptr and + returning the special MATCH_SKIP_ARG return code. This will either be + caught by a matching MARK, or get to the top, where it causes a rematch + with the md->ignore_skip_arg flag set. */ + + md->start_match_ptr = ecode + 2; + RRETURN(MATCH_SKIP_ARG); + + /* For THEN (and THEN_ARG) we pass back the address of the opcode, so that + the branch in which it occurs can be determined. Overload the start of + match pointer to do this. */ + + case OP_THEN: + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM54); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->start_match_ptr = ecode; + RRETURN(MATCH_THEN); + + case OP_THEN_ARG: + md->nomatch_mark = ecode + 2; + md->mark = NULL; /* In case previously set by assertion */ + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode] + ecode[1], offset_top, + md, eptrb, RM58); + if ((rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) && + md->mark == NULL) md->mark = ecode + 2; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->start_match_ptr = ecode; + RRETURN(MATCH_THEN); + + /* Handle an atomic group that does not contain any capturing parentheses. + This can be handled like an assertion. Prior to 8.13, all atomic groups + were handled this way. In 8.13, the code was changed as below for ONCE, so + that backups pass through the group and thereby reset captured values. + However, this uses a lot more stack, so in 8.20, atomic groups that do not + contain any captures generate OP_ONCE_NC, which can be handled in the old, + less stack intensive way. + + Check the alternative branches in turn - the matching won't pass the KET + for this kind of subpattern. If any one branch matches, we carry on as at + the end of a normal bracket, leaving the subject pointer, but resetting + the start-of-match value in case it was changed by \K. */ + + case OP_ONCE_NC: + prev = ecode; + saved_eptr = eptr; + save_mark = md->mark; + do + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM64); + if (rrc == MATCH_MATCH) /* Note: _not_ MATCH_ACCEPT */ + { + mstart = md->start_match_ptr; + break; + } + if (rrc == MATCH_THEN) + { + next = ecode + GET(ecode,1); + if (md->start_match_ptr < next && + (*ecode == OP_ALT || *next == OP_ALT)) + rrc = MATCH_NOMATCH; + } + + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode += GET(ecode,1); + md->mark = save_mark; + } + while (*ecode == OP_ALT); + + /* If hit the end of the group (which could be repeated), fail */ + + if (*ecode != OP_ONCE_NC && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH); + + /* Continue as from after the group, updating the offsets high water + mark, since extracts may have been taken. */ + + do ecode += GET(ecode, 1); while (*ecode == OP_ALT); + + offset_top = md->end_offset_top; + eptr = md->end_match_ptr; + + /* For a non-repeating ket, just continue at this level. This also + happens for a repeating ket if no characters were matched in the group. + This is the forcible breaking of infinite loops as implemented in Perl + 5.005. */ + + if (*ecode == OP_KET || eptr == saved_eptr) + { + ecode += 1+LINK_SIZE; + break; + } + + /* The repeating kets try the rest of the pattern or restart from the + preceding bracket, in the appropriate order. The second "call" of match() + uses tail recursion, to avoid using another stack frame. */ + + if (*ecode == OP_KETRMIN) + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM65); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode = prev; + goto TAIL_RECURSE; + } + else /* OP_KETRMAX */ + { + md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, prev, offset_top, md, eptrb, RM66); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode += 1 + LINK_SIZE; + goto TAIL_RECURSE; + } + /* Control never gets here */ + + /* Handle a capturing bracket, other than those that are possessive with an + unlimited repeat. If there is space in the offset vector, save the current + subject position in the working slot at the top of the vector. We mustn't + change the current values of the data slot, because they may be set from a + previous iteration of this group, and be referred to by a reference inside + the group. A failure to match might occur after the group has succeeded, + if something later on doesn't match. For this reason, we need to restore + the working value and also the values of the final offsets, in case they + were set by a previous iteration of the same bracket. + + If there isn't enough space in the offset vector, treat this as if it were + a non-capturing bracket. Don't worry about setting the flag for the error + case here; that is handled in the code for KET. */ + + case OP_CBRA: + case OP_SCBRA: + number = GET2(ecode, 1+LINK_SIZE); + offset = number << 1; + +#ifdef PCRE_DEBUG + printf("start bracket %d\n", number); + printf("subject="); + pchars(eptr, 16, TRUE, md); + printf("\n"); +#endif + + if (offset < md->offset_max) + { + save_offset1 = md->offset_vector[offset]; + save_offset2 = md->offset_vector[offset+1]; + save_offset3 = md->offset_vector[md->offset_end - number]; + save_capture_last = md->capture_last; + save_mark = md->mark; + + DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3)); + md->offset_vector[md->offset_end - number] = + (int)(eptr - md->start_subject); + + for (;;) + { + if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM1); + if (rrc == MATCH_ONCE) break; /* Backing up through an atomic group */ + + /* If we backed up to a THEN, check whether it is within the current + branch by comparing the address of the THEN that is passed back with + the end of the branch. If it is within the current branch, and the + branch is one of two or more alternatives (it either starts or ends + with OP_ALT), we have reached the limit of THEN's action, so convert + the return code to NOMATCH, which will cause normal backtracking to + happen from now on. Otherwise, THEN is passed back to an outer + alternative. This implements Perl's treatment of parenthesized groups, + where a group not containing | does not affect the current alternative, + that is, (X) is NOT the same as (X|(*F)). */ + + if (rrc == MATCH_THEN) + { + next = ecode + GET(ecode,1); + if (md->start_match_ptr < next && + (*ecode == OP_ALT || *next == OP_ALT)) + rrc = MATCH_NOMATCH; + } + + /* Anything other than NOMATCH is passed back. */ + + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->capture_last = save_capture_last; + ecode += GET(ecode, 1); + md->mark = save_mark; + if (*ecode != OP_ALT) break; + } + + DPRINTF(("bracket %d failed\n", number)); + md->offset_vector[offset] = save_offset1; + md->offset_vector[offset+1] = save_offset2; + md->offset_vector[md->offset_end - number] = save_offset3; + + /* At this point, rrc will be one of MATCH_ONCE or MATCH_NOMATCH. */ + + RRETURN(rrc); + } + + /* FALL THROUGH ... Insufficient room for saving captured contents. Treat + as a non-capturing bracket. */ + + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + + DPRINTF(("insufficient capture room: treat as non-capturing\n")); + + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + + /* Non-capturing or atomic group, except for possessive with unlimited + repeat and ONCE group with no captures. Loop for all the alternatives. + + When we get to the final alternative within the brackets, we used to return + the result of a recursive call to match() whatever happened so it was + possible to reduce stack usage by turning this into a tail recursion, + except in the case of a possibly empty group. However, now that there is + the possiblity of (*THEN) occurring in the final alternative, this + optimization is no longer always possible. + + We can optimize if we know there are no (*THEN)s in the pattern; at present + this is the best that can be done. + + MATCH_ONCE is returned when the end of an atomic group is successfully + reached, but subsequent matching fails. It passes back up the tree (causing + captured values to be reset) until the original atomic group level is + reached. This is tested by comparing md->once_target with the start of the + group. At this point, the return is converted into MATCH_NOMATCH so that + previous backup points can be taken. */ + + case OP_ONCE: + case OP_BRA: + case OP_SBRA: + DPRINTF(("start non-capturing bracket\n")); + + for (;;) + { + if (op >= OP_SBRA || op == OP_ONCE) md->match_function_type = MATCH_CBEGROUP; + + /* If this is not a possibly empty group, and there are no (*THEN)s in + the pattern, and this is the final alternative, optimize as described + above. */ + + else if (!md->hasthen && ecode[GET(ecode, 1)] != OP_ALT) + { + ecode += PRIV(OP_lengths)[*ecode]; + goto TAIL_RECURSE; + } + + /* In all other cases, we have to make another call to match(). */ + + save_mark = md->mark; + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, eptrb, + RM2); + + /* See comment in the code for capturing groups above about handling + THEN. */ + + if (rrc == MATCH_THEN) + { + next = ecode + GET(ecode,1); + if (md->start_match_ptr < next && + (*ecode == OP_ALT || *next == OP_ALT)) + rrc = MATCH_NOMATCH; + } + + if (rrc != MATCH_NOMATCH) + { + if (rrc == MATCH_ONCE) + { + const pcre_uchar *scode = ecode; + if (*scode != OP_ONCE) /* If not at start, find it */ + { + while (*scode == OP_ALT) scode += GET(scode, 1); + scode -= GET(scode, 1); + } + if (md->once_target == scode) rrc = MATCH_NOMATCH; + } + RRETURN(rrc); + } + ecode += GET(ecode, 1); + md->mark = save_mark; + if (*ecode != OP_ALT) break; + } + + RRETURN(MATCH_NOMATCH); + + /* Handle possessive capturing brackets with an unlimited repeat. We come + here from BRAZERO with allow_zero set TRUE. The offset_vector values are + handled similarly to the normal case above. However, the matching is + different. The end of these brackets will always be OP_KETRPOS, which + returns MATCH_KETRPOS without going further in the pattern. By this means + we can handle the group by iteration rather than recursion, thereby + reducing the amount of stack needed. */ + + case OP_CBRAPOS: + case OP_SCBRAPOS: + allow_zero = FALSE; + + POSSESSIVE_CAPTURE: + number = GET2(ecode, 1+LINK_SIZE); + offset = number << 1; + +#ifdef PCRE_DEBUG + printf("start possessive bracket %d\n", number); + printf("subject="); + pchars(eptr, 16, TRUE, md); + printf("\n"); +#endif + + if (offset < md->offset_max) + { + matched_once = FALSE; + code_offset = (int)(ecode - md->start_code); + + save_offset1 = md->offset_vector[offset]; + save_offset2 = md->offset_vector[offset+1]; + save_offset3 = md->offset_vector[md->offset_end - number]; + save_capture_last = md->capture_last; + + DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3)); + + /* Each time round the loop, save the current subject position for use + when the group matches. For MATCH_MATCH, the group has matched, so we + restart it with a new subject starting position, remembering that we had + at least one match. For MATCH_NOMATCH, carry on with the alternatives, as + usual. If we haven't matched any alternatives in any iteration, check to + see if a previous iteration matched. If so, the group has matched; + continue from afterwards. Otherwise it has failed; restore the previous + capture values before returning NOMATCH. */ + + for (;;) + { + md->offset_vector[md->offset_end - number] = + (int)(eptr - md->start_subject); + if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM63); + if (rrc == MATCH_KETRPOS) + { + offset_top = md->end_offset_top; + eptr = md->end_match_ptr; + ecode = md->start_code + code_offset; + save_capture_last = md->capture_last; + matched_once = TRUE; + continue; + } + + /* See comment in the code for capturing groups above about handling + THEN. */ + + if (rrc == MATCH_THEN) + { + next = ecode + GET(ecode,1); + if (md->start_match_ptr < next && + (*ecode == OP_ALT || *next == OP_ALT)) + rrc = MATCH_NOMATCH; + } + + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->capture_last = save_capture_last; + ecode += GET(ecode, 1); + if (*ecode != OP_ALT) break; + } + + if (!matched_once) + { + md->offset_vector[offset] = save_offset1; + md->offset_vector[offset+1] = save_offset2; + md->offset_vector[md->offset_end - number] = save_offset3; + } + + if (allow_zero || matched_once) + { + ecode += 1 + LINK_SIZE; + break; + } + + RRETURN(MATCH_NOMATCH); + } + + /* FALL THROUGH ... Insufficient room for saving captured contents. Treat + as a non-capturing bracket. */ + + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + + DPRINTF(("insufficient capture room: treat as non-capturing\n")); + + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + + /* Non-capturing possessive bracket with unlimited repeat. We come here + from BRAZERO with allow_zero = TRUE. The code is similar to the above, + without the capturing complication. It is written out separately for speed + and cleanliness. */ + + case OP_BRAPOS: + case OP_SBRAPOS: + allow_zero = FALSE; + + POSSESSIVE_NON_CAPTURE: + matched_once = FALSE; + code_offset = (int)(ecode - md->start_code); + + for (;;) + { + if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md, + eptrb, RM48); + if (rrc == MATCH_KETRPOS) + { + offset_top = md->end_offset_top; + eptr = md->end_match_ptr; + ecode = md->start_code + code_offset; + matched_once = TRUE; + continue; + } + + /* See comment in the code for capturing groups above about handling + THEN. */ + + if (rrc == MATCH_THEN) + { + next = ecode + GET(ecode,1); + if (md->start_match_ptr < next && + (*ecode == OP_ALT || *next == OP_ALT)) + rrc = MATCH_NOMATCH; + } + + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode += GET(ecode, 1); + if (*ecode != OP_ALT) break; + } + + if (matched_once || allow_zero) + { + ecode += 1 + LINK_SIZE; + break; + } + RRETURN(MATCH_NOMATCH); + + /* Control never reaches here. */ + + /* Conditional group: compilation checked that there are no more than + two branches. If the condition is false, skipping the first branch takes us + past the end if there is only one branch, but that's OK because that is + exactly what going to the ket would do. */ + + case OP_COND: + case OP_SCOND: + codelink = GET(ecode, 1); + + /* Because of the way auto-callout works during compile, a callout item is + inserted between OP_COND and an assertion condition. */ + + if (ecode[LINK_SIZE+1] == OP_CALLOUT) + { + if (PUBL(callout) != NULL) + { + PUBL(callout_block) cb; + cb.version = 2; /* Version 1 of the callout block */ + cb.callout_number = ecode[LINK_SIZE+2]; + cb.offset_vector = md->offset_vector; +#ifdef COMPILE_PCRE8 + cb.subject = (PCRE_SPTR)md->start_subject; +#else + cb.subject = (PCRE_SPTR16)md->start_subject; +#endif + cb.subject_length = (int)(md->end_subject - md->start_subject); + cb.start_match = (int)(mstart - md->start_subject); + cb.current_position = (int)(eptr - md->start_subject); + cb.pattern_position = GET(ecode, LINK_SIZE + 3); + cb.next_item_length = GET(ecode, 3 + 2*LINK_SIZE); + cb.capture_top = offset_top/2; + cb.capture_last = md->capture_last; + cb.callout_data = md->callout_data; + cb.mark = md->nomatch_mark; + if ((rrc = (*PUBL(callout))(&cb)) > 0) RRETURN(MATCH_NOMATCH); + if (rrc < 0) RRETURN(rrc); + } + ecode += PRIV(OP_lengths)[OP_CALLOUT]; + } + + condcode = ecode[LINK_SIZE+1]; + + /* Now see what the actual condition is */ + + if (condcode == OP_RREF || condcode == OP_NRREF) /* Recursion test */ + { + if (md->recursive == NULL) /* Not recursing => FALSE */ + { + condition = FALSE; + ecode += GET(ecode, 1); + } + else + { + int recno = GET2(ecode, LINK_SIZE + 2); /* Recursion group number*/ + condition = (recno == RREF_ANY || recno == md->recursive->group_num); + + /* If the test is for recursion into a specific subpattern, and it is + false, but the test was set up by name, scan the table to see if the + name refers to any other numbers, and test them. The condition is true + if any one is set. */ + + if (!condition && condcode == OP_NRREF) + { + pcre_uchar *slotA = md->name_table; + for (i = 0; i < md->name_count; i++) + { + if (GET2(slotA, 0) == recno) break; + slotA += md->name_entry_size; + } + + /* Found a name for the number - there can be only one; duplicate + names for different numbers are allowed, but not vice versa. First + scan down for duplicates. */ + + if (i < md->name_count) + { + pcre_uchar *slotB = slotA; + while (slotB > md->name_table) + { + slotB -= md->name_entry_size; + if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0) + { + condition = GET2(slotB, 0) == md->recursive->group_num; + if (condition) break; + } + else break; + } + + /* Scan up for duplicates */ + + if (!condition) + { + slotB = slotA; + for (i++; i < md->name_count; i++) + { + slotB += md->name_entry_size; + if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0) + { + condition = GET2(slotB, 0) == md->recursive->group_num; + if (condition) break; + } + else break; + } + } + } + } + + /* Chose branch according to the condition */ + + ecode += condition? 1 + IMM2_SIZE : GET(ecode, 1); + } + } + + else if (condcode == OP_CREF || condcode == OP_NCREF) /* Group used test */ + { + offset = GET2(ecode, LINK_SIZE+2) << 1; /* Doubled ref number */ + condition = offset < offset_top && md->offset_vector[offset] >= 0; + + /* If the numbered capture is unset, but the reference was by name, + scan the table to see if the name refers to any other numbers, and test + them. The condition is true if any one is set. This is tediously similar + to the code above, but not close enough to try to amalgamate. */ + + if (!condition && condcode == OP_NCREF) + { + int refno = offset >> 1; + pcre_uchar *slotA = md->name_table; + + for (i = 0; i < md->name_count; i++) + { + if (GET2(slotA, 0) == refno) break; + slotA += md->name_entry_size; + } + + /* Found a name for the number - there can be only one; duplicate names + for different numbers are allowed, but not vice versa. First scan down + for duplicates. */ + + if (i < md->name_count) + { + pcre_uchar *slotB = slotA; + while (slotB > md->name_table) + { + slotB -= md->name_entry_size; + if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0) + { + offset = GET2(slotB, 0) << 1; + condition = offset < offset_top && + md->offset_vector[offset] >= 0; + if (condition) break; + } + else break; + } + + /* Scan up for duplicates */ + + if (!condition) + { + slotB = slotA; + for (i++; i < md->name_count; i++) + { + slotB += md->name_entry_size; + if (STRCMP_UC_UC(slotA + IMM2_SIZE, slotB + IMM2_SIZE) == 0) + { + offset = GET2(slotB, 0) << 1; + condition = offset < offset_top && + md->offset_vector[offset] >= 0; + if (condition) break; + } + else break; + } + } + } + } + + /* Chose branch according to the condition */ + + ecode += condition? 1 + IMM2_SIZE : GET(ecode, 1); + } + + else if (condcode == OP_DEF) /* DEFINE - always false */ + { + condition = FALSE; + ecode += GET(ecode, 1); + } + + /* The condition is an assertion. Call match() to evaluate it - setting + md->match_function_type to MATCH_CONDASSERT causes it to stop at the end of + an assertion. */ + + else + { + md->match_function_type = MATCH_CONDASSERT; + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM3); + if (rrc == MATCH_MATCH) + { + if (md->end_offset_top > offset_top) + offset_top = md->end_offset_top; /* Captures may have happened */ + condition = TRUE; + ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE + 2); + while (*ecode == OP_ALT) ecode += GET(ecode, 1); + } + + /* PCRE doesn't allow the effect of (*THEN) to escape beyond an + assertion; it is therefore treated as NOMATCH. */ + + else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) + { + RRETURN(rrc); /* Need braces because of following else */ + } + else + { + condition = FALSE; + ecode += codelink; + } + } + + /* We are now at the branch that is to be obeyed. As there is only one, can + use tail recursion to avoid using another stack frame, except when there is + unlimited repeat of a possibly empty group. In the latter case, a recursive + call to match() is always required, unless the second alternative doesn't + exist, in which case we can just plough on. Note that, for compatibility + with Perl, the | in a conditional group is NOT treated as creating two + alternatives. If a THEN is encountered in the branch, it propagates out to + the enclosing alternative (unless nested in a deeper set of alternatives, + of course). */ + + if (condition || *ecode == OP_ALT) + { + if (op != OP_SCOND) + { + ecode += 1 + LINK_SIZE; + goto TAIL_RECURSE; + } + + md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM49); + RRETURN(rrc); + } + + /* Condition false & no alternative; continue after the group. */ + + else + { + ecode += 1 + LINK_SIZE; + } + break; + + + /* Before OP_ACCEPT there may be any number of OP_CLOSE opcodes, + to close any currently open capturing brackets. */ + + case OP_CLOSE: + number = GET2(ecode, 1); + offset = number << 1; + +#ifdef PCRE_DEBUG + printf("end bracket %d at *ACCEPT", number); + printf("\n"); +#endif + + md->capture_last = number; + if (offset >= md->offset_max) md->offset_overflow = TRUE; else + { + md->offset_vector[offset] = + md->offset_vector[md->offset_end - number]; + md->offset_vector[offset+1] = (int)(eptr - md->start_subject); + if (offset_top <= offset) offset_top = offset + 2; + } + ecode += 1 + IMM2_SIZE; + break; + + + /* End of the pattern, either real or forced. */ + + case OP_END: + case OP_ACCEPT: + case OP_ASSERT_ACCEPT: + + /* If we have matched an empty string, fail if not in an assertion and not + in a recursion if either PCRE_NOTEMPTY is set, or if PCRE_NOTEMPTY_ATSTART + is set and we have matched at the start of the subject. In both cases, + backtracking will then try other alternatives, if any. */ + + if (eptr == mstart && op != OP_ASSERT_ACCEPT && + md->recursive == NULL && + (md->notempty || + (md->notempty_atstart && + mstart == md->start_subject + md->start_offset))) + RRETURN(MATCH_NOMATCH); + + /* Otherwise, we have a match. */ + + md->end_match_ptr = eptr; /* Record where we ended */ + md->end_offset_top = offset_top; /* and how many extracts were taken */ + md->start_match_ptr = mstart; /* and the start (\K can modify) */ + + /* For some reason, the macros don't work properly if an expression is + given as the argument to RRETURN when the heap is in use. */ + + rrc = (op == OP_END)? MATCH_MATCH : MATCH_ACCEPT; + RRETURN(rrc); + + /* Assertion brackets. Check the alternative branches in turn - the + matching won't pass the KET for an assertion. If any one branch matches, + the assertion is true. Lookbehind assertions have an OP_REVERSE item at the + start of each branch to move the current point backwards, so the code at + this level is identical to the lookahead case. When the assertion is part + of a condition, we want to return immediately afterwards. The caller of + this incarnation of the match() function will have set MATCH_CONDASSERT in + md->match_function type, and one of these opcodes will be the first opcode + that is processed. We use a local variable that is preserved over calls to + match() to remember this case. */ + + case OP_ASSERT: + case OP_ASSERTBACK: + save_mark = md->mark; + if (md->match_function_type == MATCH_CONDASSERT) + { + condassert = TRUE; + md->match_function_type = 0; + } + else condassert = FALSE; + + do + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM4); + if (rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) + { + mstart = md->start_match_ptr; /* In case \K reset it */ + break; + } + + /* PCRE does not allow THEN to escape beyond an assertion; it is treated + as NOMATCH. */ + + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + ecode += GET(ecode, 1); + md->mark = save_mark; + } + while (*ecode == OP_ALT); + + if (*ecode == OP_KET) RRETURN(MATCH_NOMATCH); + + /* If checking an assertion for a condition, return MATCH_MATCH. */ + + if (condassert) RRETURN(MATCH_MATCH); + + /* Continue from after the assertion, updating the offsets high water + mark, since extracts may have been taken during the assertion. */ + + do ecode += GET(ecode,1); while (*ecode == OP_ALT); + ecode += 1 + LINK_SIZE; + offset_top = md->end_offset_top; + continue; + + /* Negative assertion: all branches must fail to match. Encountering SKIP, + PRUNE, or COMMIT means we must assume failure without checking subsequent + branches. */ + + case OP_ASSERT_NOT: + case OP_ASSERTBACK_NOT: + save_mark = md->mark; + if (md->match_function_type == MATCH_CONDASSERT) + { + condassert = TRUE; + md->match_function_type = 0; + } + else condassert = FALSE; + + do + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM5); + md->mark = save_mark; + if (rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) RRETURN(MATCH_NOMATCH); + if (rrc == MATCH_SKIP || rrc == MATCH_PRUNE || rrc == MATCH_COMMIT) + { + do ecode += GET(ecode,1); while (*ecode == OP_ALT); + break; + } + + /* PCRE does not allow THEN to escape beyond an assertion; it is treated + as NOMATCH. */ + + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + ecode += GET(ecode,1); + } + while (*ecode == OP_ALT); + + if (condassert) RRETURN(MATCH_MATCH); /* Condition assertion */ + + ecode += 1 + LINK_SIZE; + continue; + + /* Move the subject pointer back. This occurs only at the start of + each branch of a lookbehind assertion. If we are too close to the start to + move back, this match function fails. When working with UTF-8 we move + back a number of characters, not bytes. */ + + case OP_REVERSE: +#ifdef SUPPORT_UTF + if (utf) + { + i = GET(ecode, 1); + while (i-- > 0) + { + eptr--; + if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH); + BACKCHAR(eptr); + } + } + else +#endif + + /* No UTF-8 support, or not in UTF-8 mode: count is byte count */ + + { + eptr -= GET(ecode, 1); + if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH); + } + + /* Save the earliest consulted character, then skip to next op code */ + + if (eptr < md->start_used_ptr) md->start_used_ptr = eptr; + ecode += 1 + LINK_SIZE; + break; + + /* The callout item calls an external function, if one is provided, passing + details of the match so far. This is mainly for debugging, though the + function is able to force a failure. */ + + case OP_CALLOUT: + if (PUBL(callout) != NULL) + { + PUBL(callout_block) cb; + cb.version = 2; /* Version 1 of the callout block */ + cb.callout_number = ecode[1]; + cb.offset_vector = md->offset_vector; +#ifdef COMPILE_PCRE8 + cb.subject = (PCRE_SPTR)md->start_subject; +#else + cb.subject = (PCRE_SPTR16)md->start_subject; +#endif + cb.subject_length = (int)(md->end_subject - md->start_subject); + cb.start_match = (int)(mstart - md->start_subject); + cb.current_position = (int)(eptr - md->start_subject); + cb.pattern_position = GET(ecode, 2); + cb.next_item_length = GET(ecode, 2 + LINK_SIZE); + cb.capture_top = offset_top/2; + cb.capture_last = md->capture_last; + cb.callout_data = md->callout_data; + cb.mark = md->nomatch_mark; + if ((rrc = (*PUBL(callout))(&cb)) > 0) RRETURN(MATCH_NOMATCH); + if (rrc < 0) RRETURN(rrc); + } + ecode += 2 + 2*LINK_SIZE; + break; + + /* Recursion either matches the current regex, or some subexpression. The + offset data is the offset to the starting bracket from the start of the + whole pattern. (This is so that it works from duplicated subpatterns.) + + The state of the capturing groups is preserved over recursion, and + re-instated afterwards. We don't know how many are started and not yet + finished (offset_top records the completed total) so we just have to save + all the potential data. There may be up to 65535 such values, which is too + large to put on the stack, but using malloc for small numbers seems + expensive. As a compromise, the stack is used when there are no more than + REC_STACK_SAVE_MAX values to store; otherwise malloc is used. + + There are also other values that have to be saved. We use a chained + sequence of blocks that actually live on the stack. Thanks to Robin Houston + for the original version of this logic. It has, however, been hacked around + a lot, so he is not to blame for the current way it works. */ + + case OP_RECURSE: + { + recursion_info *ri; + int recno; + + callpat = md->start_code + GET(ecode, 1); + recno = (callpat == md->start_code)? 0 : + GET2(callpat, 1 + LINK_SIZE); + + /* Check for repeating a recursion without advancing the subject pointer. + This should catch convoluted mutual recursions. (Some simple cases are + caught at compile time.) */ + + for (ri = md->recursive; ri != NULL; ri = ri->prevrec) + if (recno == ri->group_num && eptr == ri->subject_position) + RRETURN(PCRE_ERROR_RECURSELOOP); + + /* Add to "recursing stack" */ + + new_recursive.group_num = recno; + new_recursive.subject_position = eptr; + new_recursive.prevrec = md->recursive; + md->recursive = &new_recursive; + + /* Where to continue from afterwards */ + + ecode += 1 + LINK_SIZE; + + /* Now save the offset data */ + + new_recursive.saved_max = md->offset_end; + if (new_recursive.saved_max <= REC_STACK_SAVE_MAX) + new_recursive.offset_save = stacksave; + else + { + new_recursive.offset_save = + (int *)(PUBL(malloc))(new_recursive.saved_max * sizeof(int)); + if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY); + } + memcpy(new_recursive.offset_save, md->offset_vector, + new_recursive.saved_max * sizeof(int)); + + /* OK, now we can do the recursion. After processing each alternative, + restore the offset data. If there were nested recursions, md->recursive + might be changed, so reset it before looping. */ + + DPRINTF(("Recursing into group %d\n", new_recursive.group_num)); + cbegroup = (*callpat >= OP_SBRA); + do + { + if (cbegroup) md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, callpat + PRIV(OP_lengths)[*callpat], offset_top, + md, eptrb, RM6); + memcpy(md->offset_vector, new_recursive.offset_save, + new_recursive.saved_max * sizeof(int)); + md->recursive = new_recursive.prevrec; + if (rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) + { + DPRINTF(("Recursion matched\n")); + if (new_recursive.offset_save != stacksave) + (PUBL(free))(new_recursive.offset_save); + + /* Set where we got to in the subject, and reset the start in case + it was changed by \K. This *is* propagated back out of a recursion, + for Perl compatibility. */ + + eptr = md->end_match_ptr; + mstart = md->start_match_ptr; + goto RECURSION_MATCHED; /* Exit loop; end processing */ + } + + /* PCRE does not allow THEN to escape beyond a recursion; it is treated + as NOMATCH. */ + + else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) + { + DPRINTF(("Recursion gave error %d\n", rrc)); + if (new_recursive.offset_save != stacksave) + (PUBL(free))(new_recursive.offset_save); + RRETURN(rrc); + } + + md->recursive = &new_recursive; + callpat += GET(callpat, 1); + } + while (*callpat == OP_ALT); + + DPRINTF(("Recursion didn't match\n")); + md->recursive = new_recursive.prevrec; + if (new_recursive.offset_save != stacksave) + (PUBL(free))(new_recursive.offset_save); + RRETURN(MATCH_NOMATCH); + } + + RECURSION_MATCHED: + break; + + /* An alternation is the end of a branch; scan along to find the end of the + bracketed group and go to there. */ + + case OP_ALT: + do ecode += GET(ecode,1); while (*ecode == OP_ALT); + break; + + /* BRAZERO, BRAMINZERO and SKIPZERO occur just before a bracket group, + indicating that it may occur zero times. It may repeat infinitely, or not + at all - i.e. it could be ()* or ()? or even (){0} in the pattern. Brackets + with fixed upper repeat limits are compiled as a number of copies, with the + optional ones preceded by BRAZERO or BRAMINZERO. */ + + case OP_BRAZERO: + next = ecode + 1; + RMATCH(eptr, next, offset_top, md, eptrb, RM10); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + do next += GET(next, 1); while (*next == OP_ALT); + ecode = next + 1 + LINK_SIZE; + break; + + case OP_BRAMINZERO: + next = ecode + 1; + do next += GET(next, 1); while (*next == OP_ALT); + RMATCH(eptr, next + 1+LINK_SIZE, offset_top, md, eptrb, RM11); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode++; + break; + + case OP_SKIPZERO: + next = ecode+1; + do next += GET(next,1); while (*next == OP_ALT); + ecode = next + 1 + LINK_SIZE; + break; + + /* BRAPOSZERO occurs before a possessive bracket group. Don't do anything + here; just jump to the group, with allow_zero set TRUE. */ + + case OP_BRAPOSZERO: + op = *(++ecode); + allow_zero = TRUE; + if (op == OP_CBRAPOS || op == OP_SCBRAPOS) goto POSSESSIVE_CAPTURE; + goto POSSESSIVE_NON_CAPTURE; + + /* End of a group, repeated or non-repeating. */ + + case OP_KET: + case OP_KETRMIN: + case OP_KETRMAX: + case OP_KETRPOS: + prev = ecode - GET(ecode, 1); + + /* If this was a group that remembered the subject start, in order to break + infinite repeats of empty string matches, retrieve the subject start from + the chain. Otherwise, set it NULL. */ + + if (*prev >= OP_SBRA || *prev == OP_ONCE) + { + saved_eptr = eptrb->epb_saved_eptr; /* Value at start of group */ + eptrb = eptrb->epb_prev; /* Backup to previous group */ + } + else saved_eptr = NULL; + + /* If we are at the end of an assertion group or a non-capturing atomic + group, stop matching and return MATCH_MATCH, but record the current high + water mark for use by positive assertions. We also need to record the match + start in case it was changed by \K. */ + + if ((*prev >= OP_ASSERT && *prev <= OP_ASSERTBACK_NOT) || + *prev == OP_ONCE_NC) + { + md->end_match_ptr = eptr; /* For ONCE_NC */ + md->end_offset_top = offset_top; + md->start_match_ptr = mstart; + RRETURN(MATCH_MATCH); /* Sets md->mark */ + } + + /* For capturing groups we have to check the group number back at the start + and if necessary complete handling an extraction by setting the offsets and + bumping the high water mark. Whole-pattern recursion is coded as a recurse + into group 0, so it won't be picked up here. Instead, we catch it when the + OP_END is reached. Other recursion is handled here. We just have to record + the current subject position and start match pointer and give a MATCH + return. */ + + if (*prev == OP_CBRA || *prev == OP_SCBRA || + *prev == OP_CBRAPOS || *prev == OP_SCBRAPOS) + { + number = GET2(prev, 1+LINK_SIZE); + offset = number << 1; + +#ifdef PCRE_DEBUG + printf("end bracket %d", number); + printf("\n"); +#endif + + /* Handle a recursively called group. */ + + if (md->recursive != NULL && md->recursive->group_num == number) + { + md->end_match_ptr = eptr; + md->start_match_ptr = mstart; + RRETURN(MATCH_MATCH); + } + + /* Deal with capturing */ + + md->capture_last = number; + if (offset >= md->offset_max) md->offset_overflow = TRUE; else + { + /* If offset is greater than offset_top, it means that we are + "skipping" a capturing group, and that group's offsets must be marked + unset. In earlier versions of PCRE, all the offsets were unset at the + start of matching, but this doesn't work because atomic groups and + assertions can cause a value to be set that should later be unset. + Example: matching /(?>(a))b|(a)c/ against "ac". This sets group 1 as + part of the atomic group, but this is not on the final matching path, + so must be unset when 2 is set. (If there is no group 2, there is no + problem, because offset_top will then be 2, indicating no capture.) */ + + if (offset > offset_top) + { + register int *iptr = md->offset_vector + offset_top; + register int *iend = md->offset_vector + offset; + while (iptr < iend) *iptr++ = -1; + } + + /* Now make the extraction */ + + md->offset_vector[offset] = + md->offset_vector[md->offset_end - number]; + md->offset_vector[offset+1] = (int)(eptr - md->start_subject); + if (offset_top <= offset) offset_top = offset + 2; + } + } + + /* For an ordinary non-repeating ket, just continue at this level. This + also happens for a repeating ket if no characters were matched in the + group. This is the forcible breaking of infinite loops as implemented in + Perl 5.005. For a non-repeating atomic group that includes captures, + establish a backup point by processing the rest of the pattern at a lower + level. If this results in a NOMATCH return, pass MATCH_ONCE back to the + original OP_ONCE level, thereby bypassing intermediate backup points, but + resetting any captures that happened along the way. */ + + if (*ecode == OP_KET || eptr == saved_eptr) + { + if (*prev == OP_ONCE) + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM12); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->once_target = prev; /* Level at which to change to MATCH_NOMATCH */ + RRETURN(MATCH_ONCE); + } + ecode += 1 + LINK_SIZE; /* Carry on at this level */ + break; + } + + /* OP_KETRPOS is a possessive repeating ket. Remember the current position, + and return the MATCH_KETRPOS. This makes it possible to do the repeats one + at a time from the outer level, thus saving stack. */ + + if (*ecode == OP_KETRPOS) + { + md->end_match_ptr = eptr; + md->end_offset_top = offset_top; + RRETURN(MATCH_KETRPOS); + } + + /* The normal repeating kets try the rest of the pattern or restart from + the preceding bracket, in the appropriate order. In the second case, we can + use tail recursion to avoid using another stack frame, unless we have an + an atomic group or an unlimited repeat of a group that can match an empty + string. */ + + if (*ecode == OP_KETRMIN) + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM7); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (*prev == OP_ONCE) + { + RMATCH(eptr, prev, offset_top, md, eptrb, RM8); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->once_target = prev; /* Level at which to change to MATCH_NOMATCH */ + RRETURN(MATCH_ONCE); + } + if (*prev >= OP_SBRA) /* Could match an empty string */ + { + md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, prev, offset_top, md, eptrb, RM50); + RRETURN(rrc); + } + ecode = prev; + goto TAIL_RECURSE; + } + else /* OP_KETRMAX */ + { + if (*prev >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP; + RMATCH(eptr, prev, offset_top, md, eptrb, RM13); + if (rrc == MATCH_ONCE && md->once_target == prev) rrc = MATCH_NOMATCH; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (*prev == OP_ONCE) + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM9); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->once_target = prev; + RRETURN(MATCH_ONCE); + } + ecode += 1 + LINK_SIZE; + goto TAIL_RECURSE; + } + /* Control never gets here */ + + /* Not multiline mode: start of subject assertion, unless notbol. */ + + case OP_CIRC: + if (md->notbol && eptr == md->start_subject) RRETURN(MATCH_NOMATCH); + + /* Start of subject assertion */ + + case OP_SOD: + if (eptr != md->start_subject) RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* Multiline mode: start of subject unless notbol, or after any newline. */ + + case OP_CIRCM: + if (md->notbol && eptr == md->start_subject) RRETURN(MATCH_NOMATCH); + if (eptr != md->start_subject && + (eptr == md->end_subject || !WAS_NEWLINE(eptr))) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* Start of match assertion */ + + case OP_SOM: + if (eptr != md->start_subject + md->start_offset) RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* Reset the start of match point */ + + case OP_SET_SOM: + mstart = eptr; + ecode++; + break; + + /* Multiline mode: assert before any newline, or before end of subject + unless noteol is set. */ + + case OP_DOLLM: + if (eptr < md->end_subject) + { if (!IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); } + else + { + if (md->noteol) RRETURN(MATCH_NOMATCH); + SCHECK_PARTIAL(); + } + ecode++; + break; + + /* Not multiline mode: assert before a terminating newline or before end of + subject unless noteol is set. */ + + case OP_DOLL: + if (md->noteol) RRETURN(MATCH_NOMATCH); + if (!md->endonly) goto ASSERT_NL_OR_EOS; + + /* ... else fall through for endonly */ + + /* End of subject assertion (\z) */ + + case OP_EOD: + if (eptr < md->end_subject) RRETURN(MATCH_NOMATCH); + SCHECK_PARTIAL(); + ecode++; + break; + + /* End of subject or ending \n assertion (\Z) */ + + case OP_EODN: + ASSERT_NL_OR_EOS: + if (eptr < md->end_subject && + (!IS_NEWLINE(eptr) || eptr != md->end_subject - md->nllen)) + RRETURN(MATCH_NOMATCH); + + /* Either at end of string or \n before end. */ + + SCHECK_PARTIAL(); + ecode++; + break; + + /* Word boundary assertions */ + + case OP_NOT_WORD_BOUNDARY: + case OP_WORD_BOUNDARY: + { + + /* Find out if the previous and current characters are "word" characters. + It takes a bit more work in UTF-8 mode. Characters > 255 are assumed to + be "non-word" characters. Remember the earliest consulted character for + partial matching. */ + +#ifdef SUPPORT_UTF + if (utf) + { + /* Get status of previous character */ + + if (eptr == md->start_subject) prev_is_word = FALSE; else + { + PCRE_PUCHAR lastptr = eptr - 1; + BACKCHAR(lastptr); + if (lastptr < md->start_used_ptr) md->start_used_ptr = lastptr; + GETCHAR(c, lastptr); +#ifdef SUPPORT_UCP + if (md->use_ucp) + { + if (c == '_') prev_is_word = TRUE; else + { + int cat = UCD_CATEGORY(c); + prev_is_word = (cat == ucp_L || cat == ucp_N); + } + } + else +#endif + prev_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0; + } + + /* Get status of next character */ + + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + cur_is_word = FALSE; + } + else + { + GETCHAR(c, eptr); +#ifdef SUPPORT_UCP + if (md->use_ucp) + { + if (c == '_') cur_is_word = TRUE; else + { + int cat = UCD_CATEGORY(c); + cur_is_word = (cat == ucp_L || cat == ucp_N); + } + } + else +#endif + cur_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0; + } + } + else +#endif + + /* Not in UTF-8 mode, but we may still have PCRE_UCP set, and for + consistency with the behaviour of \w we do use it in this case. */ + + { + /* Get status of previous character */ + + if (eptr == md->start_subject) prev_is_word = FALSE; else + { + if (eptr <= md->start_used_ptr) md->start_used_ptr = eptr - 1; +#ifdef SUPPORT_UCP + if (md->use_ucp) + { + c = eptr[-1]; + if (c == '_') prev_is_word = TRUE; else + { + int cat = UCD_CATEGORY(c); + prev_is_word = (cat == ucp_L || cat == ucp_N); + } + } + else +#endif + prev_is_word = MAX_255(eptr[-1]) + && ((md->ctypes[eptr[-1]] & ctype_word) != 0); + } + + /* Get status of next character */ + + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + cur_is_word = FALSE; + } + else +#ifdef SUPPORT_UCP + if (md->use_ucp) + { + c = *eptr; + if (c == '_') cur_is_word = TRUE; else + { + int cat = UCD_CATEGORY(c); + cur_is_word = (cat == ucp_L || cat == ucp_N); + } + } + else +#endif + cur_is_word = MAX_255(*eptr) + && ((md->ctypes[*eptr] & ctype_word) != 0); + } + + /* Now see if the situation is what we want */ + + if ((*ecode++ == OP_WORD_BOUNDARY)? + cur_is_word == prev_is_word : cur_is_word != prev_is_word) + RRETURN(MATCH_NOMATCH); + } + break; + + /* Match a single character type; inline for speed */ + + case OP_ANY: + if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); + /* Fall through */ + + case OP_ALLANY: + if (eptr >= md->end_subject) /* DO NOT merge the eptr++ here; it must */ + { /* not be updated before SCHECK_PARTIAL. */ + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr++; +#ifdef SUPPORT_UTF + if (utf) ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); +#endif + ecode++; + break; + + /* Match a single byte, even in UTF-8 mode. This opcode really does match + any byte, even newline, independent of the setting of PCRE_DOTALL. */ + + case OP_ANYBYTE: + if (eptr >= md->end_subject) /* DO NOT merge the eptr++ here; it must */ + { /* not be updated before SCHECK_PARTIAL. */ + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr++; + ecode++; + break; + + case OP_NOT_DIGIT: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ( +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + c < 256 && +#endif + (md->ctypes[c] & ctype_digit) != 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_DIGIT: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ( +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + c > 255 || +#endif + (md->ctypes[c] & ctype_digit) == 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_NOT_WHITESPACE: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ( +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + c < 256 && +#endif + (md->ctypes[c] & ctype_space) != 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_WHITESPACE: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ( +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + c > 255 || +#endif + (md->ctypes[c] & ctype_space) == 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_NOT_WORDCHAR: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ( +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + c < 256 && +#endif + (md->ctypes[c] & ctype_word) != 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_WORDCHAR: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ( +#if defined SUPPORT_UTF || !(defined COMPILE_PCRE8) + c > 255 || +#endif + (md->ctypes[c] & ctype_word) == 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_ANYNL: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + ecode++; + break; + + case OP_NOT_HSPACE: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + RRETURN(MATCH_NOMATCH); + } + ecode++; + break; + + case OP_HSPACE: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + } + ecode++; + break; + + case OP_NOT_VSPACE: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + RRETURN(MATCH_NOMATCH); + } + ecode++; + break; + + case OP_VSPACE: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + break; + } + ecode++; + break; + +#ifdef SUPPORT_UCP + /* Check the next character by Unicode property. We will get here only + if the support is in the binary; otherwise a compile-time error occurs. */ + + case OP_PROP: + case OP_NOTPROP: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + { + const ucd_record *prop = GET_UCD(c); + + switch(ecode[1]) + { + case PT_ANY: + if (op == OP_NOTPROP) RRETURN(MATCH_NOMATCH); + break; + + case PT_LAMP: + if ((prop->chartype == ucp_Lu || + prop->chartype == ucp_Ll || + prop->chartype == ucp_Lt) == (op == OP_NOTPROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_GC: + if ((ecode[2] != PRIV(ucp_gentype)[prop->chartype]) == (op == OP_PROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_PC: + if ((ecode[2] != prop->chartype) == (op == OP_PROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_SC: + if ((ecode[2] != prop->script) == (op == OP_PROP)) + RRETURN(MATCH_NOMATCH); + break; + + /* These are specials */ + + case PT_ALNUM: + if ((PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N) == (op == OP_NOTPROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_SPACE: /* Perl space */ + if ((PRIV(ucp_gentype)[prop->chartype] == ucp_Z || + c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR) + == (op == OP_NOTPROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_PXSPACE: /* POSIX space */ + if ((PRIV(ucp_gentype)[prop->chartype] == ucp_Z || + c == CHAR_HT || c == CHAR_NL || c == CHAR_VT || + c == CHAR_FF || c == CHAR_CR) + == (op == OP_NOTPROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_WORD: + if ((PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N || + c == CHAR_UNDERSCORE) == (op == OP_NOTPROP)) + RRETURN(MATCH_NOMATCH); + break; + + /* This should never occur */ + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + ecode += 3; + } + break; + + /* Match an extended Unicode sequence. We will get here only if the support + is in the binary; otherwise a compile-time error occurs. */ + + case OP_EXTUNI: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if (UCD_CATEGORY(c) == ucp_M) RRETURN(MATCH_NOMATCH); + while (eptr < md->end_subject) + { + int len = 1; + if (!utf) c = *eptr; else { GETCHARLEN(c, eptr, len); } + if (UCD_CATEGORY(c) != ucp_M) break; + eptr += len; + } + ecode++; + break; +#endif + + + /* Match a back reference, possibly repeatedly. Look past the end of the + item to see if there is repeat information following. The code is similar + to that for character classes, but repeated for efficiency. Then obey + similar code to character type repeats - written out again for speed. + However, if the referenced string is the empty string, always treat + it as matched, any number of times (otherwise there could be infinite + loops). */ + + case OP_REF: + case OP_REFI: + caseless = op == OP_REFI; + offset = GET2(ecode, 1) << 1; /* Doubled ref number */ + ecode += 1 + IMM2_SIZE; + + /* If the reference is unset, there are two possibilities: + + (a) In the default, Perl-compatible state, set the length negative; + this ensures that every attempt at a match fails. We can't just fail + here, because of the possibility of quantifiers with zero minima. + + (b) If the JavaScript compatibility flag is set, set the length to zero + so that the back reference matches an empty string. + + Otherwise, set the length to the length of what was matched by the + referenced subpattern. */ + + if (offset >= offset_top || md->offset_vector[offset] < 0) + length = (md->jscript_compat)? 0 : -1; + else + length = md->offset_vector[offset+1] - md->offset_vector[offset]; + + /* Set up for repetition, or handle the non-repeated case */ + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRQUERY: + case OP_CRMINQUERY: + c = *ecode++ - OP_CRSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + minimize = (*ecode == OP_CRMINRANGE); + min = GET2(ecode, 1); + max = GET2(ecode, 1 + IMM2_SIZE); + if (max == 0) max = INT_MAX; + ecode += 1 + 2 * IMM2_SIZE; + break; + + default: /* No repeat follows */ + if ((length = match_ref(offset, eptr, length, md, caseless)) < 0) + { + CHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr += length; + continue; /* With the main loop */ + } + + /* Handle repeated back references. If the length of the reference is + zero, just continue with the main loop. If the length is negative, it + means the reference is unset in non-Java-compatible mode. If the minimum is + zero, we can continue at the same level without recursion. For any other + minimum, carrying on will result in NOMATCH. */ + + if (length == 0) continue; + if (length < 0 && min == 0) continue; + + /* First, ensure the minimum number of matches are present. We get back + the length of the reference string explicitly rather than passing the + address of eptr, so that eptr can be a register variable. */ + + for (i = 1; i <= min; i++) + { + int slength; + if ((slength = match_ref(offset, eptr, length, md, caseless)) < 0) + { + CHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr += slength; + } + + /* If min = max, continue at the same level without recursion. + They are not both allowed to be zero. */ + + if (min == max) continue; + + /* If minimizing, keep trying and advancing the pointer */ + + if (minimize) + { + for (fi = min;; fi++) + { + int slength; + RMATCH(eptr, ecode, offset_top, md, eptrb, RM14); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if ((slength = match_ref(offset, eptr, length, md, caseless)) < 0) + { + CHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr += slength; + } + /* Control never gets here */ + } + + /* If maximizing, find the longest string and work backwards */ + + else + { + pp = eptr; + for (i = min; i < max; i++) + { + int slength; + if ((slength = match_ref(offset, eptr, length, md, caseless)) < 0) + { + CHECK_PARTIAL(); + break; + } + eptr += slength; + } + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM15); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr -= length; + } + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + /* Match a bit-mapped character class, possibly repeatedly. This op code is + used when all the characters in the class have values in the range 0-255, + and either the matching is caseful, or the characters are in the range + 0-127 when UTF-8 processing is enabled. The only difference between + OP_CLASS and OP_NCLASS occurs when a data character outside the range is + encountered. + + First, look past the end of the item to see if there is repeat information + following. Then obey similar code to character type repeats - written out + again for speed. */ + + case OP_NCLASS: + case OP_CLASS: + { + /* The data variable is saved across frames, so the byte map needs to + be stored there. */ +#define BYTE_MAP ((pcre_uint8 *)data) + data = ecode + 1; /* Save for matching */ + ecode += 1 + (32 / sizeof(pcre_uchar)); /* Advance past the item */ + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRQUERY: + case OP_CRMINQUERY: + c = *ecode++ - OP_CRSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + minimize = (*ecode == OP_CRMINRANGE); + min = GET2(ecode, 1); + max = GET2(ecode, 1 + IMM2_SIZE); + if (max == 0) max = INT_MAX; + ecode += 1 + 2 * IMM2_SIZE; + break; + + default: /* No repeat follows */ + min = max = 1; + break; + } + + /* First, ensure the minimum number of matches are present. */ + +#ifdef SUPPORT_UTF + if (utf) + { + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + if (c > 255) + { + if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); + } + else + if ((BYTE_MAP[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF mode */ + { + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + c = *eptr++; +#ifndef COMPILE_PCRE8 + if (c > 255) + { + if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); + } + else +#endif + if ((BYTE_MAP[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + + /* If max == min we can continue with the main loop without the + need to recurse. */ + + if (min == max) continue; + + /* If minimizing, keep testing the rest of the expression and advancing + the pointer while it matches the class. */ + + if (minimize) + { +#ifdef SUPPORT_UTF + if (utf) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM16); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + if (c > 255) + { + if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); + } + else + if ((BYTE_MAP[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF mode */ + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM17); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + c = *eptr++; +#ifndef COMPILE_PCRE8 + if (c > 255) + { + if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); + } + else +#endif + if ((BYTE_MAP[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + } + + /* If maximizing, find the longest possible run, then work backwards. */ + + else + { + pp = eptr; + +#ifdef SUPPORT_UTF + if (utf) + { + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c > 255) + { + if (op == OP_CLASS) break; + } + else + if ((BYTE_MAP[c/8] & (1 << (c&7))) == 0) break; + eptr += len; + } + for (;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM18); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif + /* Not UTF mode */ + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + c = *eptr; +#ifndef COMPILE_PCRE8 + if (c > 255) + { + if (op == OP_CLASS) break; + } + else +#endif + if ((BYTE_MAP[c/8] & (1 << (c&7))) == 0) break; + eptr++; + } + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM19); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + } + } + + RRETURN(MATCH_NOMATCH); + } +#undef BYTE_MAP + } + /* Control never gets here */ + + + /* Match an extended character class. This opcode is encountered only + when UTF-8 mode mode is supported. Nevertheless, we may not be in UTF-8 + mode, because Unicode properties are supported in non-UTF-8 mode. */ + +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + case OP_XCLASS: + { + data = ecode + 1 + LINK_SIZE; /* Save for matching */ + ecode += GET(ecode, 1); /* Advance past the item */ + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRQUERY: + case OP_CRMINQUERY: + c = *ecode++ - OP_CRSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + minimize = (*ecode == OP_CRMINRANGE); + min = GET2(ecode, 1); + max = GET2(ecode, 1 + IMM2_SIZE); + if (max == 0) max = INT_MAX; + ecode += 1 + 2 * IMM2_SIZE; + break; + + default: /* No repeat follows */ + min = max = 1; + break; + } + + /* First, ensure the minimum number of matches are present. */ + + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if (!PRIV(xclass)(c, data, utf)) RRETURN(MATCH_NOMATCH); + } + + /* If max == min we can continue with the main loop without the + need to recurse. */ + + if (min == max) continue; + + /* If minimizing, keep testing the rest of the expression and advancing + the pointer while it matches the class. */ + + if (minimize) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM20); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if (!PRIV(xclass)(c, data, utf)) RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + + /* If maximizing, find the longest possible run, then work backwards. */ + + else + { + pp = eptr; + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } +#ifdef SUPPORT_UTF + GETCHARLENTEST(c, eptr, len); +#else + c = *eptr; +#endif + if (!PRIV(xclass)(c, data, utf)) break; + eptr += len; + } + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM21); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ +#ifdef SUPPORT_UTF + if (utf) BACKCHAR(eptr); +#endif + } + RRETURN(MATCH_NOMATCH); + } + + /* Control never gets here */ + } +#endif /* End of XCLASS */ + + /* Match a single character, casefully */ + + case OP_CHAR: +#ifdef SUPPORT_UTF + if (utf) + { + length = 1; + ecode++; + GETCHARLEN(fc, ecode, length); + if (length > md->end_subject - eptr) + { + CHECK_PARTIAL(); /* Not SCHECK_PARTIAL() */ + RRETURN(MATCH_NOMATCH); + } + while (length-- > 0) if (*ecode++ != *eptr++) RRETURN(MATCH_NOMATCH); + } + else +#endif + /* Not UTF mode */ + { + if (md->end_subject - eptr < 1) + { + SCHECK_PARTIAL(); /* This one can use SCHECK_PARTIAL() */ + RRETURN(MATCH_NOMATCH); + } + if (ecode[1] != *eptr++) RRETURN(MATCH_NOMATCH); + ecode += 2; + } + break; + + /* Match a single character, caselessly. If we are at the end of the + subject, give up immediately. */ + + case OP_CHARI: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + +#ifdef SUPPORT_UTF + if (utf) + { + length = 1; + ecode++; + GETCHARLEN(fc, ecode, length); + + /* If the pattern character's value is < 128, we have only one byte, and + we know that its other case must also be one byte long, so we can use the + fast lookup table. We know that there is at least one byte left in the + subject. */ + + if (fc < 128) + { + if (md->lcc[fc] + != TABLE_GET(*eptr, md->lcc, *eptr)) RRETURN(MATCH_NOMATCH); + ecode++; + eptr++; + } + + /* Otherwise we must pick up the subject character. Note that we cannot + use the value of "length" to check for sufficient bytes left, because the + other case of the character may have more or fewer bytes. */ + + else + { + unsigned int dc; + GETCHARINC(dc, eptr); + ecode += length; + + /* If we have Unicode property support, we can use it to test the other + case of the character, if there is one. */ + + if (fc != dc) + { +#ifdef SUPPORT_UCP + if (dc != UCD_OTHERCASE(fc)) +#endif + RRETURN(MATCH_NOMATCH); + } + } + } + else +#endif /* SUPPORT_UTF */ + + /* Not UTF mode */ + { + if (TABLE_GET(ecode[1], md->lcc, ecode[1]) + != TABLE_GET(*eptr, md->lcc, *eptr)) RRETURN(MATCH_NOMATCH); + eptr++; + ecode += 2; + } + break; + + /* Match a single character repeatedly. */ + + case OP_EXACT: + case OP_EXACTI: + min = max = GET2(ecode, 1); + ecode += 1 + IMM2_SIZE; + goto REPEATCHAR; + + case OP_POSUPTO: + case OP_POSUPTOI: + possessive = TRUE; + /* Fall through */ + + case OP_UPTO: + case OP_UPTOI: + case OP_MINUPTO: + case OP_MINUPTOI: + min = 0; + max = GET2(ecode, 1); + minimize = *ecode == OP_MINUPTO || *ecode == OP_MINUPTOI; + ecode += 1 + IMM2_SIZE; + goto REPEATCHAR; + + case OP_POSSTAR: + case OP_POSSTARI: + possessive = TRUE; + min = 0; + max = INT_MAX; + ecode++; + goto REPEATCHAR; + + case OP_POSPLUS: + case OP_POSPLUSI: + possessive = TRUE; + min = 1; + max = INT_MAX; + ecode++; + goto REPEATCHAR; + + case OP_POSQUERY: + case OP_POSQUERYI: + possessive = TRUE; + min = 0; + max = 1; + ecode++; + goto REPEATCHAR; + + case OP_STAR: + case OP_STARI: + case OP_MINSTAR: + case OP_MINSTARI: + case OP_PLUS: + case OP_PLUSI: + case OP_MINPLUS: + case OP_MINPLUSI: + case OP_QUERY: + case OP_QUERYI: + case OP_MINQUERY: + case OP_MINQUERYI: + c = *ecode++ - ((op < OP_STARI)? OP_STAR : OP_STARI); + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + + /* Common code for all repeated single-character matches. */ + + REPEATCHAR: +#ifdef SUPPORT_UTF + if (utf) + { + length = 1; + charptr = ecode; + GETCHARLEN(fc, ecode, length); + ecode += length; + + /* Handle multibyte character matching specially here. There is + support for caseless matching if UCP support is present. */ + + if (length > 1) + { +#ifdef SUPPORT_UCP + unsigned int othercase; + if (op >= OP_STARI && /* Caseless */ + (othercase = UCD_OTHERCASE(fc)) != fc) + oclength = PRIV(ord2utf)(othercase, occhars); + else oclength = 0; +#endif /* SUPPORT_UCP */ + + for (i = 1; i <= min; i++) + { + if (eptr <= md->end_subject - length && + memcmp(eptr, charptr, IN_UCHARS(length)) == 0) eptr += length; +#ifdef SUPPORT_UCP + else if (oclength > 0 && + eptr <= md->end_subject - oclength && + memcmp(eptr, occhars, IN_UCHARS(oclength)) == 0) eptr += oclength; +#endif /* SUPPORT_UCP */ + else + { + CHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + } + + if (min == max) continue; + + if (minimize) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM22); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr <= md->end_subject - length && + memcmp(eptr, charptr, IN_UCHARS(length)) == 0) eptr += length; +#ifdef SUPPORT_UCP + else if (oclength > 0 && + eptr <= md->end_subject - oclength && + memcmp(eptr, occhars, IN_UCHARS(oclength)) == 0) eptr += oclength; +#endif /* SUPPORT_UCP */ + else + { + CHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + } + + else /* Maximize */ + { + pp = eptr; + for (i = min; i < max; i++) + { + if (eptr <= md->end_subject - length && + memcmp(eptr, charptr, IN_UCHARS(length)) == 0) eptr += length; +#ifdef SUPPORT_UCP + else if (oclength > 0 && + eptr <= md->end_subject - oclength && + memcmp(eptr, occhars, IN_UCHARS(oclength)) == 0) eptr += oclength; +#endif /* SUPPORT_UCP */ + else + { + CHECK_PARTIAL(); + break; + } + } + + if (possessive) continue; + + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM23); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr == pp) { RRETURN(MATCH_NOMATCH); } +#ifdef SUPPORT_UCP + eptr--; + BACKCHAR(eptr); +#else /* without SUPPORT_UCP */ + eptr -= length; +#endif /* SUPPORT_UCP */ + } + } + /* Control never gets here */ + } + + /* If the length of a UTF-8 character is 1, we fall through here, and + obey the code as for non-UTF-8 characters below, though in this case the + value of fc will always be < 128. */ + } + else +#endif /* SUPPORT_UTF */ + /* When not in UTF-8 mode, load a single-byte character. */ + fc = *ecode++; + + /* The value of fc at this point is always one character, though we may + or may not be in UTF mode. The code is duplicated for the caseless and + caseful cases, for speed, since matching characters is likely to be quite + common. First, ensure the minimum number of matches are present. If min = + max, continue at the same level without recursing. Otherwise, if + minimizing, keep trying the rest of the expression and advancing one + matching character if failing, up to the maximum. Alternatively, if + maximizing, find the maximum number of characters and work backwards. */ + + DPRINTF(("matching %c{%d,%d} against subject %.*s\n", fc, min, max, + max, eptr)); + + if (op >= OP_STARI) /* Caseless */ + { +#ifdef COMPILE_PCRE8 + /* fc must be < 128 if UTF is enabled. */ + foc = md->fcc[fc]; +#else +#ifdef SUPPORT_UTF +#ifdef SUPPORT_UCP + if (utf && fc > 127) + foc = UCD_OTHERCASE(fc); +#else + if (utf && fc > 127) + foc = fc; +#endif /* SUPPORT_UCP */ + else +#endif /* SUPPORT_UTF */ + foc = TABLE_GET(fc, md->fcc, fc); +#endif /* COMPILE_PCRE8 */ + + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc != *eptr && foc != *eptr) RRETURN(MATCH_NOMATCH); + eptr++; + } + if (min == max) continue; + if (minimize) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM24); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc != *eptr && foc != *eptr) RRETURN(MATCH_NOMATCH); + eptr++; + } + /* Control never gets here */ + } + else /* Maximize */ + { + pp = eptr; + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (fc != *eptr && foc != *eptr) break; + eptr++; + } + + if (possessive) continue; + + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM25); + eptr--; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + } + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + + /* Caseful comparisons (includes all multi-byte characters) */ + + else + { + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc != *eptr++) RRETURN(MATCH_NOMATCH); + } + + if (min == max) continue; + + if (minimize) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM26); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc != *eptr++) RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + else /* Maximize */ + { + pp = eptr; + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (fc != *eptr) break; + eptr++; + } + if (possessive) continue; + + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM27); + eptr--; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + } + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + + /* Match a negated single one-byte character. The character we are + checking can be multibyte. */ + + case OP_NOT: + case OP_NOTI: + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + ecode++; + GETCHARINCTEST(c, eptr); + if (op == OP_NOTI) /* The caseless case */ + { + register unsigned int ch, och; + ch = *ecode++; +#ifdef COMPILE_PCRE8 + /* ch must be < 128 if UTF is enabled. */ + och = md->fcc[ch]; +#else +#ifdef SUPPORT_UTF +#ifdef SUPPORT_UCP + if (utf && ch > 127) + och = UCD_OTHERCASE(ch); +#else + if (utf && ch > 127) + och = ch; +#endif /* SUPPORT_UCP */ + else +#endif /* SUPPORT_UTF */ + och = TABLE_GET(ch, md->fcc, ch); +#endif /* COMPILE_PCRE8 */ + if (ch == c || och == c) RRETURN(MATCH_NOMATCH); + } + else /* Caseful */ + { + if (*ecode++ == c) RRETURN(MATCH_NOMATCH); + } + break; + + /* Match a negated single one-byte character repeatedly. This is almost a + repeat of the code for a repeated single character, but I haven't found a + nice way of commoning these up that doesn't require a test of the + positive/negative option for each character match. Maybe that wouldn't add + very much to the time taken, but character matching *is* what this is all + about... */ + + case OP_NOTEXACT: + case OP_NOTEXACTI: + min = max = GET2(ecode, 1); + ecode += 1 + IMM2_SIZE; + goto REPEATNOTCHAR; + + case OP_NOTUPTO: + case OP_NOTUPTOI: + case OP_NOTMINUPTO: + case OP_NOTMINUPTOI: + min = 0; + max = GET2(ecode, 1); + minimize = *ecode == OP_NOTMINUPTO || *ecode == OP_NOTMINUPTOI; + ecode += 1 + IMM2_SIZE; + goto REPEATNOTCHAR; + + case OP_NOTPOSSTAR: + case OP_NOTPOSSTARI: + possessive = TRUE; + min = 0; + max = INT_MAX; + ecode++; + goto REPEATNOTCHAR; + + case OP_NOTPOSPLUS: + case OP_NOTPOSPLUSI: + possessive = TRUE; + min = 1; + max = INT_MAX; + ecode++; + goto REPEATNOTCHAR; + + case OP_NOTPOSQUERY: + case OP_NOTPOSQUERYI: + possessive = TRUE; + min = 0; + max = 1; + ecode++; + goto REPEATNOTCHAR; + + case OP_NOTPOSUPTO: + case OP_NOTPOSUPTOI: + possessive = TRUE; + min = 0; + max = GET2(ecode, 1); + ecode += 1 + IMM2_SIZE; + goto REPEATNOTCHAR; + + case OP_NOTSTAR: + case OP_NOTSTARI: + case OP_NOTMINSTAR: + case OP_NOTMINSTARI: + case OP_NOTPLUS: + case OP_NOTPLUSI: + case OP_NOTMINPLUS: + case OP_NOTMINPLUSI: + case OP_NOTQUERY: + case OP_NOTQUERYI: + case OP_NOTMINQUERY: + case OP_NOTMINQUERYI: + c = *ecode++ - ((op >= OP_NOTSTARI)? OP_NOTSTARI: OP_NOTSTAR); + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + + /* Common code for all repeated single-byte matches. */ + + REPEATNOTCHAR: + fc = *ecode++; + + /* The code is duplicated for the caseless and caseful cases, for speed, + since matching characters is likely to be quite common. First, ensure the + minimum number of matches are present. If min = max, continue at the same + level without recursing. Otherwise, if minimizing, keep trying the rest of + the expression and advancing one matching character if failing, up to the + maximum. Alternatively, if maximizing, find the maximum number of + characters and work backwards. */ + + DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", fc, min, max, + max, eptr)); + + if (op >= OP_NOTSTARI) /* Caseless */ + { +#ifdef COMPILE_PCRE8 + /* fc must be < 128 if UTF is enabled. */ + foc = md->fcc[fc]; +#else +#ifdef SUPPORT_UTF +#ifdef SUPPORT_UCP + if (utf && fc > 127) + foc = UCD_OTHERCASE(fc); +#else + if (utf && fc > 127) + foc = fc; +#endif /* SUPPORT_UCP */ + else +#endif /* SUPPORT_UTF */ + foc = TABLE_GET(fc, md->fcc, fc); +#endif /* COMPILE_PCRE8 */ + +#ifdef SUPPORT_UTF + if (utf) + { + register unsigned int d; + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(d, eptr); + if (fc == d || (unsigned int) foc == d) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF mode */ + { + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc == *eptr || foc == *eptr) RRETURN(MATCH_NOMATCH); + eptr++; + } + } + + if (min == max) continue; + + if (minimize) + { +#ifdef SUPPORT_UTF + if (utf) + { + register unsigned int d; + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM28); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(d, eptr); + if (fc == d || (unsigned int)foc == d) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF mode */ + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM29); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc == *eptr || foc == *eptr) RRETURN(MATCH_NOMATCH); + eptr++; + } + } + /* Control never gets here */ + } + + /* Maximize case */ + + else + { + pp = eptr; + +#ifdef SUPPORT_UTF + if (utf) + { + register unsigned int d; + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(d, eptr, len); + if (fc == d || (unsigned int)foc == d) break; + eptr += len; + } + if (possessive) continue; + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM30); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif + /* Not UTF mode */ + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (fc == *eptr || foc == *eptr) break; + eptr++; + } + if (possessive) continue; + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM31); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + } + } + + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + + /* Caseful comparisons */ + + else + { +#ifdef SUPPORT_UTF + if (utf) + { + register unsigned int d; + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(d, eptr); + if (fc == d) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF mode */ + { + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc == *eptr++) RRETURN(MATCH_NOMATCH); + } + } + + if (min == max) continue; + + if (minimize) + { +#ifdef SUPPORT_UTF + if (utf) + { + register unsigned int d; + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM32); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(d, eptr); + if (fc == d) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF mode */ + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM33); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (fc == *eptr++) RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + } + + /* Maximize case */ + + else + { + pp = eptr; + +#ifdef SUPPORT_UTF + if (utf) + { + register unsigned int d; + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(d, eptr, len); + if (fc == d) break; + eptr += len; + } + if (possessive) continue; + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM34); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif + /* Not UTF mode */ + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (fc == *eptr) break; + eptr++; + } + if (possessive) continue; + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM35); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + } + } + + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + + /* Match a single character type repeatedly; several different opcodes + share code. This is very similar to the code for single characters, but we + repeat it in the interests of efficiency. */ + + case OP_TYPEEXACT: + min = max = GET2(ecode, 1); + minimize = TRUE; + ecode += 1 + IMM2_SIZE; + goto REPEATTYPE; + + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + min = 0; + max = GET2(ecode, 1); + minimize = *ecode == OP_TYPEMINUPTO; + ecode += 1 + IMM2_SIZE; + goto REPEATTYPE; + + case OP_TYPEPOSSTAR: + possessive = TRUE; + min = 0; + max = INT_MAX; + ecode++; + goto REPEATTYPE; + + case OP_TYPEPOSPLUS: + possessive = TRUE; + min = 1; + max = INT_MAX; + ecode++; + goto REPEATTYPE; + + case OP_TYPEPOSQUERY: + possessive = TRUE; + min = 0; + max = 1; + ecode++; + goto REPEATTYPE; + + case OP_TYPEPOSUPTO: + possessive = TRUE; + min = 0; + max = GET2(ecode, 1); + ecode += 1 + IMM2_SIZE; + goto REPEATTYPE; + + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + c = *ecode++ - OP_TYPESTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + + /* Common code for all repeated single character type matches. Note that + in UTF-8 mode, '.' matches a character of any length, but for the other + character types, the valid characters are all one-byte long. */ + + REPEATTYPE: + ctype = *ecode++; /* Code for the character type */ + +#ifdef SUPPORT_UCP + if (ctype == OP_PROP || ctype == OP_NOTPROP) + { + prop_fail_result = ctype == OP_NOTPROP; + prop_type = *ecode++; + prop_value = *ecode++; + } + else prop_type = -1; +#endif + + /* First, ensure the minimum number of matches are present. Use inline + code for maximizing the speed, and do the type test once at the start + (i.e. keep it out of the loop). Separate the UTF-8 code completely as that + is tidier. Also separate the UCP code, which can be the same for both UTF-8 + and single-bytes. */ + + if (min > 0) + { +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + switch(prop_type) + { + case PT_ANY: + if (prop_fail_result) RRETURN(MATCH_NOMATCH); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + } + break; + + case PT_LAMP: + for (i = 1; i <= min; i++) + { + int chartype; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + chartype = UCD_CHARTYPE(c); + if ((chartype == ucp_Lu || + chartype == ucp_Ll || + chartype == ucp_Lt) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_GC: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CATEGORY(c) == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_PC: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CHARTYPE(c) == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_SC: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_SCRIPT(c) == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_ALNUM: + for (i = 1; i <= min; i++) + { + int category; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + category = UCD_CATEGORY(c); + if ((category == ucp_L || category == ucp_N) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_SPACE: /* Perl space */ + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CATEGORY(c) == ucp_Z || c == CHAR_HT || c == CHAR_NL || + c == CHAR_FF || c == CHAR_CR) + == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_PXSPACE: /* POSIX space */ + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CATEGORY(c) == ucp_Z || c == CHAR_HT || c == CHAR_NL || + c == CHAR_VT || c == CHAR_FF || c == CHAR_CR) + == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_WORD: + for (i = 1; i <= min; i++) + { + int category; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + category = UCD_CATEGORY(c); + if ((category == ucp_L || category == ucp_N || c == CHAR_UNDERSCORE) + == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + /* This should not occur */ + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + + /* Match extended Unicode sequences. We will get here only if the + support is in the binary; otherwise a compile-time error occurs. */ + + else if (ctype == OP_EXTUNI) + { + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if (UCD_CATEGORY(c) == ucp_M) RRETURN(MATCH_NOMATCH); + while (eptr < md->end_subject) + { + int len = 1; + if (!utf) c = *eptr; else { GETCHARLEN(c, eptr, len); } + if (UCD_CATEGORY(c) != ucp_M) break; + eptr += len; + } + } + } + + else +#endif /* SUPPORT_UCP */ + +/* Handle all other cases when the coding is UTF-8 */ + +#ifdef SUPPORT_UTF + if (utf) switch(ctype) + { + case OP_ANY: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + break; + + case OP_ALLANY: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + break; + + case OP_ANYBYTE: + if (eptr > md->end_subject - min) RRETURN(MATCH_NOMATCH); + eptr += min; + break; + + case OP_ANYNL: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + } + break; + + case OP_NOT_HSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_HSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + } + } + break; + + case OP_NOT_VSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_VSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + break; + } + } + break; + + case OP_NOT_DIGIT: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINC(c, eptr); + if (c < 128 && (md->ctypes[c] & ctype_digit) != 0) + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_DIGIT: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (*eptr >= 128 || (md->ctypes[*eptr] & ctype_digit) == 0) + RRETURN(MATCH_NOMATCH); + eptr++; + /* No need to skip more bytes - we know it's a 1-byte character */ + } + break; + + case OP_NOT_WHITESPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (*eptr < 128 && (md->ctypes[*eptr] & ctype_space) != 0) + RRETURN(MATCH_NOMATCH); + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + break; + + case OP_WHITESPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (*eptr >= 128 || (md->ctypes[*eptr] & ctype_space) == 0) + RRETURN(MATCH_NOMATCH); + eptr++; + /* No need to skip more bytes - we know it's a 1-byte character */ + } + break; + + case OP_NOT_WORDCHAR: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (*eptr < 128 && (md->ctypes[*eptr] & ctype_word) != 0) + RRETURN(MATCH_NOMATCH); + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + break; + + case OP_WORDCHAR: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (*eptr >= 128 || (md->ctypes[*eptr] & ctype_word) == 0) + RRETURN(MATCH_NOMATCH); + eptr++; + /* No need to skip more bytes - we know it's a 1-byte character */ + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } /* End switch(ctype) */ + + else +#endif /* SUPPORT_UTF */ + + /* Code for the non-UTF-8 case for minimum matching of operators other + than OP_PROP and OP_NOTPROP. */ + + switch(ctype) + { + case OP_ANY: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + case OP_ALLANY: + if (eptr > md->end_subject - min) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr += min; + break; + + case OP_ANYBYTE: + if (eptr > md->end_subject - min) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + eptr += min; + break; + + case OP_ANYNL: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + switch(*eptr++) + { + default: RRETURN(MATCH_NOMATCH); + + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: +#ifdef COMPILE_PCRE16 + case 0x2028: + case 0x2029: +#endif + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + } + break; + + case OP_NOT_HSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + switch(*eptr++) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ +#ifdef COMPILE_PCRE16 + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ +#endif + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_HSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + switch(*eptr++) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ +#ifdef COMPILE_PCRE16 + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ +#endif + break; + } + } + break; + + case OP_NOT_VSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + switch(*eptr++) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ +#ifdef COMPILE_PCRE16 + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ +#endif + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_VSPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + switch(*eptr++) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ +#ifdef COMPILE_PCRE16 + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ +#endif + break; + } + } + break; + + case OP_NOT_DIGIT: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (MAX_255(*eptr) && (md->ctypes[*eptr] & ctype_digit) != 0) + RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + case OP_DIGIT: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (!MAX_255(*eptr) || (md->ctypes[*eptr] & ctype_digit) == 0) + RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + case OP_NOT_WHITESPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (MAX_255(*eptr) && (md->ctypes[*eptr] & ctype_space) != 0) + RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + case OP_WHITESPACE: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (!MAX_255(*eptr) || (md->ctypes[*eptr] & ctype_space) == 0) + RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + case OP_NOT_WORDCHAR: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (MAX_255(*eptr) && (md->ctypes[*eptr] & ctype_word) != 0) + RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + case OP_WORDCHAR: + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (!MAX_255(*eptr) || (md->ctypes[*eptr] & ctype_word) == 0) + RRETURN(MATCH_NOMATCH); + eptr++; + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + + /* If min = max, continue at the same level without recursing */ + + if (min == max) continue; + + /* If minimizing, we have to test the rest of the pattern before each + subsequent match. Again, separate the UTF-8 case for speed, and also + separate the UCP cases. */ + + if (minimize) + { +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + switch(prop_type) + { + case PT_ANY: + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM36); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if (prop_fail_result) RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_LAMP: + for (fi = min;; fi++) + { + int chartype; + RMATCH(eptr, ecode, offset_top, md, eptrb, RM37); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + chartype = UCD_CHARTYPE(c); + if ((chartype == ucp_Lu || + chartype == ucp_Ll || + chartype == ucp_Lt) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_GC: + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM38); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CATEGORY(c) == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_PC: + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM39); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CHARTYPE(c) == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_SC: + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM40); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_SCRIPT(c) == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_ALNUM: + for (fi = min;; fi++) + { + int category; + RMATCH(eptr, ecode, offset_top, md, eptrb, RM59); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + category = UCD_CATEGORY(c); + if ((category == ucp_L || category == ucp_N) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_SPACE: /* Perl space */ + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM60); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CATEGORY(c) == ucp_Z || c == CHAR_HT || c == CHAR_NL || + c == CHAR_FF || c == CHAR_CR) + == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_PXSPACE: /* POSIX space */ + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM61); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if ((UCD_CATEGORY(c) == ucp_Z || c == CHAR_HT || c == CHAR_NL || + c == CHAR_VT || c == CHAR_FF || c == CHAR_CR) + == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_WORD: + for (fi = min;; fi++) + { + int category; + RMATCH(eptr, ecode, offset_top, md, eptrb, RM62); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + category = UCD_CATEGORY(c); + if ((category == ucp_L || + category == ucp_N || + c == CHAR_UNDERSCORE) + == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + /* This should never occur */ + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + + /* Match extended Unicode sequences. We will get here only if the + support is in the binary; otherwise a compile-time error occurs. */ + + else if (ctype == OP_EXTUNI) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM41); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + GETCHARINCTEST(c, eptr); + if (UCD_CATEGORY(c) == ucp_M) RRETURN(MATCH_NOMATCH); + while (eptr < md->end_subject) + { + int len = 1; + if (!utf) c = *eptr; else { GETCHARLEN(c, eptr, len); } + if (UCD_CATEGORY(c) != ucp_M) break; + eptr += len; + } + } + } + else +#endif /* SUPPORT_UCP */ + +#ifdef SUPPORT_UTF + if (utf) + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM42); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (ctype == OP_ANY && IS_NEWLINE(eptr)) + RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + switch(ctype) + { + case OP_ANY: /* This is the non-NL case */ + case OP_ALLANY: + case OP_ANYBYTE: + break; + + case OP_ANYNL: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + break; + + case OP_NOT_HSPACE: + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_HSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + } + break; + + case OP_NOT_VSPACE: + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_VSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + break; + } + break; + + case OP_NOT_DIGIT: + if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_DIGIT: + if (c >= 256 || (md->ctypes[c] & ctype_digit) == 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WHITESPACE: + if (c < 256 && (md->ctypes[c] & ctype_space) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_WHITESPACE: + if (c >= 256 || (md->ctypes[c] & ctype_space) == 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WORDCHAR: + if (c < 256 && (md->ctypes[c] & ctype_word) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_WORDCHAR: + if (c >= 256 || (md->ctypes[c] & ctype_word) == 0) + RRETURN(MATCH_NOMATCH); + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + } + else +#endif + /* Not UTF mode */ + { + for (fi = min;; fi++) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM43); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max) RRETURN(MATCH_NOMATCH); + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + RRETURN(MATCH_NOMATCH); + } + if (ctype == OP_ANY && IS_NEWLINE(eptr)) + RRETURN(MATCH_NOMATCH); + c = *eptr++; + switch(ctype) + { + case OP_ANY: /* This is the non-NL case */ + case OP_ALLANY: + case OP_ANYBYTE: + break; + + case OP_ANYNL: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: +#ifdef COMPILE_PCRE16 + case 0x2028: + case 0x2029: +#endif + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + break; + + case OP_NOT_HSPACE: + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ +#ifdef COMPILE_PCRE16 + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ +#endif + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_HSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ +#ifdef COMPILE_PCRE16 + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ +#endif + break; + } + break; + + case OP_NOT_VSPACE: + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ +#ifdef COMPILE_PCRE16 + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ +#endif + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_VSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ +#ifdef COMPILE_PCRE16 + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ +#endif + break; + } + break; + + case OP_NOT_DIGIT: + if (MAX_255(c) && (md->ctypes[c] & ctype_digit) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_DIGIT: + if (!MAX_255(c) || (md->ctypes[c] & ctype_digit) == 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WHITESPACE: + if (MAX_255(c) && (md->ctypes[c] & ctype_space) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_WHITESPACE: + if (!MAX_255(c) || (md->ctypes[c] & ctype_space) == 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WORDCHAR: + if (MAX_255(c) && (md->ctypes[c] & ctype_word) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_WORDCHAR: + if (!MAX_255(c) || (md->ctypes[c] & ctype_word) == 0) RRETURN(MATCH_NOMATCH); + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + } + /* Control never gets here */ + } + + /* If maximizing, it is worth using inline code for speed, doing the type + test once at the start (i.e. keep it out of the loop). Again, keep the + UTF-8 and UCP stuff separate. */ + + else + { + pp = eptr; /* Remember where we started */ + +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + switch(prop_type) + { + case PT_ANY: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + if (prop_fail_result) break; + eptr+= len; + } + break; + + case PT_LAMP: + for (i = min; i < max; i++) + { + int chartype; + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + chartype = UCD_CHARTYPE(c); + if ((chartype == ucp_Lu || + chartype == ucp_Ll || + chartype == ucp_Lt) == prop_fail_result) + break; + eptr+= len; + } + break; + + case PT_GC: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + if ((UCD_CATEGORY(c) == prop_value) == prop_fail_result) break; + eptr+= len; + } + break; + + case PT_PC: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + if ((UCD_CHARTYPE(c) == prop_value) == prop_fail_result) break; + eptr+= len; + } + break; + + case PT_SC: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + if ((UCD_SCRIPT(c) == prop_value) == prop_fail_result) break; + eptr+= len; + } + break; + + case PT_ALNUM: + for (i = min; i < max; i++) + { + int category; + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + category = UCD_CATEGORY(c); + if ((category == ucp_L || category == ucp_N) == prop_fail_result) + break; + eptr+= len; + } + break; + + case PT_SPACE: /* Perl space */ + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + if ((UCD_CATEGORY(c) == ucp_Z || c == CHAR_HT || c == CHAR_NL || + c == CHAR_FF || c == CHAR_CR) + == prop_fail_result) + break; + eptr+= len; + } + break; + + case PT_PXSPACE: /* POSIX space */ + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + if ((UCD_CATEGORY(c) == ucp_Z || c == CHAR_HT || c == CHAR_NL || + c == CHAR_VT || c == CHAR_FF || c == CHAR_CR) + == prop_fail_result) + break; + eptr+= len; + } + break; + + case PT_WORD: + for (i = min; i < max; i++) + { + int category; + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLENTEST(c, eptr, len); + category = UCD_CATEGORY(c); + if ((category == ucp_L || category == ucp_N || + c == CHAR_UNDERSCORE) == prop_fail_result) + break; + eptr+= len; + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + /* eptr is now past the end of the maximum run */ + + if (possessive) continue; + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM44); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + if (utf) BACKCHAR(eptr); + } + } + + /* Match extended Unicode sequences. We will get here only if the + support is in the binary; otherwise a compile-time error occurs. */ + + else if (ctype == OP_EXTUNI) + { + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (!utf) c = *eptr; else { GETCHARLEN(c, eptr, len); } + if (UCD_CATEGORY(c) == ucp_M) break; + eptr += len; + while (eptr < md->end_subject) + { + len = 1; + if (!utf) c = *eptr; else { GETCHARLEN(c, eptr, len); } + if (UCD_CATEGORY(c) != ucp_M) break; + eptr += len; + } + } + + /* eptr is now past the end of the maximum run */ + + if (possessive) continue; + + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM45); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + for (;;) /* Move back over one extended */ + { + if (!utf) c = *eptr; else + { + BACKCHAR(eptr); + GETCHAR(c, eptr); + } + if (UCD_CATEGORY(c) != ucp_M) break; + eptr--; + } + } + } + + else +#endif /* SUPPORT_UCP */ + +#ifdef SUPPORT_UTF + if (utf) + { + switch(ctype) + { + case OP_ANY: + if (max < INT_MAX) + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (IS_NEWLINE(eptr)) break; + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + } + + /* Handle unlimited UTF-8 repeat */ + + else + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (IS_NEWLINE(eptr)) break; + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + } + break; + + case OP_ALLANY: + if (max < INT_MAX) + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + eptr++; + ACROSSCHAR(eptr < md->end_subject, *eptr, eptr++); + } + } + else + { + eptr = md->end_subject; /* Unlimited UTF-8 repeat */ + SCHECK_PARTIAL(); + } + break; + + /* The byte case is the same as non-UTF8 */ + + case OP_ANYBYTE: + c = max - min; + if (c > (unsigned int)(md->end_subject - eptr)) + { + eptr = md->end_subject; + SCHECK_PARTIAL(); + } + else eptr += c; + break; + + case OP_ANYNL: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c == 0x000d) + { + if (++eptr >= md->end_subject) break; + if (*eptr == 0x000a) eptr++; + } + else + { + if (c != 0x000a && + (md->bsr_anycrlf || + (c != 0x000b && c != 0x000c && + c != 0x0085 && c != 0x2028 && c != 0x2029))) + break; + eptr += len; + } + } + break; + + case OP_NOT_HSPACE: + case OP_HSPACE: + for (i = min; i < max; i++) + { + BOOL gotspace; + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + switch(c) + { + default: gotspace = FALSE; break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + gotspace = TRUE; + break; + } + if (gotspace == (ctype == OP_NOT_HSPACE)) break; + eptr += len; + } + break; + + case OP_NOT_VSPACE: + case OP_VSPACE: + for (i = min; i < max; i++) + { + BOOL gotspace; + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + switch(c) + { + default: gotspace = FALSE; break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + gotspace = TRUE; + break; + } + if (gotspace == (ctype == OP_NOT_VSPACE)) break; + eptr += len; + } + break; + + case OP_NOT_DIGIT: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) break; + eptr+= len; + } + break; + + case OP_DIGIT: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c >= 256 ||(md->ctypes[c] & ctype_digit) == 0) break; + eptr+= len; + } + break; + + case OP_NOT_WHITESPACE: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c < 256 && (md->ctypes[c] & ctype_space) != 0) break; + eptr+= len; + } + break; + + case OP_WHITESPACE: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c >= 256 ||(md->ctypes[c] & ctype_space) == 0) break; + eptr+= len; + } + break; + + case OP_NOT_WORDCHAR: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c < 256 && (md->ctypes[c] & ctype_word) != 0) break; + eptr+= len; + } + break; + + case OP_WORDCHAR: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + GETCHARLEN(c, eptr, len); + if (c >= 256 || (md->ctypes[c] & ctype_word) == 0) break; + eptr+= len; + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + /* eptr is now past the end of the maximum run. If possessive, we are + done (no backing up). Otherwise, match at this position; anything other + than no match is immediately returned. For nomatch, back up one + character, unless we are matching \R and the last thing matched was + \r\n, in which case, back up two bytes. */ + + if (possessive) continue; + for(;;) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM46); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + if (ctype == OP_ANYNL && eptr > pp && *eptr == '\n' && + eptr[-1] == '\r') eptr--; + } + } + else +#endif /* SUPPORT_UTF */ + /* Not UTF mode */ + { + switch(ctype) + { + case OP_ANY: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (IS_NEWLINE(eptr)) break; + eptr++; + } + break; + + case OP_ALLANY: + case OP_ANYBYTE: + c = max - min; + if (c > (unsigned int)(md->end_subject - eptr)) + { + eptr = md->end_subject; + SCHECK_PARTIAL(); + } + else eptr += c; + break; + + case OP_ANYNL: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + c = *eptr; + if (c == 0x000d) + { + if (++eptr >= md->end_subject) break; + if (*eptr == 0x000a) eptr++; + } + else + { + if (c != 0x000a && (md->bsr_anycrlf || + (c != 0x000b && c != 0x000c && c != 0x0085 +#ifdef COMPILE_PCRE16 + && c != 0x2028 && c != 0x2029 +#endif + ))) break; + eptr++; + } + } + break; + + case OP_NOT_HSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + c = *eptr; + if (c == 0x09 || c == 0x20 || c == 0xa0 +#ifdef COMPILE_PCRE16 + || c == 0x1680 || c == 0x180e || (c >= 0x2000 && c <= 0x200A) + || c == 0x202f || c == 0x205f || c == 0x3000 +#endif + ) break; + eptr++; + } + break; + + case OP_HSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + c = *eptr; + if (c != 0x09 && c != 0x20 && c != 0xa0 +#ifdef COMPILE_PCRE16 + && c != 0x1680 && c != 0x180e && (c < 0x2000 || c > 0x200A) + && c != 0x202f && c != 0x205f && c != 0x3000 +#endif + ) break; + eptr++; + } + break; + + case OP_NOT_VSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + c = *eptr; + if (c == 0x0a || c == 0x0b || c == 0x0c || c == 0x0d || c == 0x85 +#ifdef COMPILE_PCRE16 + || c == 0x2028 || c == 0x2029 +#endif + ) break; + eptr++; + } + break; + + case OP_VSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + c = *eptr; + if (c != 0x0a && c != 0x0b && c != 0x0c && c != 0x0d && c != 0x85 +#ifdef COMPILE_PCRE16 + && c != 0x2028 && c != 0x2029 +#endif + ) break; + eptr++; + } + break; + + case OP_NOT_DIGIT: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (MAX_255(*eptr) && (md->ctypes[*eptr] & ctype_digit) != 0) break; + eptr++; + } + break; + + case OP_DIGIT: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (!MAX_255(*eptr) || (md->ctypes[*eptr] & ctype_digit) == 0) break; + eptr++; + } + break; + + case OP_NOT_WHITESPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (MAX_255(*eptr) && (md->ctypes[*eptr] & ctype_space) != 0) break; + eptr++; + } + break; + + case OP_WHITESPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (!MAX_255(*eptr) || (md->ctypes[*eptr] & ctype_space) == 0) break; + eptr++; + } + break; + + case OP_NOT_WORDCHAR: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (MAX_255(*eptr) && (md->ctypes[*eptr] & ctype_word) != 0) break; + eptr++; + } + break; + + case OP_WORDCHAR: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) + { + SCHECK_PARTIAL(); + break; + } + if (!MAX_255(*eptr) || (md->ctypes[*eptr] & ctype_word) == 0) break; + eptr++; + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + /* eptr is now past the end of the maximum run. If possessive, we are + done (no backing up). Otherwise, match at this position; anything other + than no match is immediately returned. For nomatch, back up one + character (byte), unless we are matching \R and the last thing matched + was \r\n, in which case, back up two bytes. */ + + if (possessive) continue; + while (eptr >= pp) + { + RMATCH(eptr, ecode, offset_top, md, eptrb, RM47); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + if (ctype == OP_ANYNL && eptr > pp && *eptr == '\n' && + eptr[-1] == '\r') eptr--; + } + } + + /* Get here if we can't make it match with any permitted repetitions */ + + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + /* There's been some horrible disaster. Arrival here can only mean there is + something seriously wrong in the code above or the OP_xxx definitions. */ + + default: + DPRINTF(("Unknown opcode %d\n", *ecode)); + RRETURN(PCRE_ERROR_UNKNOWN_OPCODE); + } + + /* Do not stick any code in here without much thought; it is assumed + that "continue" in the code above comes out to here to repeat the main + loop. */ + + } /* End of main loop */ +/* Control never reaches here */ + + +/* When compiling to use the heap rather than the stack for recursive calls to +match(), the RRETURN() macro jumps here. The number that is saved in +frame->Xwhere indicates which label we actually want to return to. */ + +#ifdef NO_RECURSE +#define LBL(val) case val: goto L_RM##val; +HEAP_RETURN: +switch (frame->Xwhere) + { + LBL( 1) LBL( 2) LBL( 3) LBL( 4) LBL( 5) LBL( 6) LBL( 7) LBL( 8) + LBL( 9) LBL(10) LBL(11) LBL(12) LBL(13) LBL(14) LBL(15) LBL(17) + LBL(19) LBL(24) LBL(25) LBL(26) LBL(27) LBL(29) LBL(31) LBL(33) + LBL(35) LBL(43) LBL(47) LBL(48) LBL(49) LBL(50) LBL(51) LBL(52) + LBL(53) LBL(54) LBL(55) LBL(56) LBL(57) LBL(58) LBL(63) LBL(64) + LBL(65) LBL(66) +#if defined SUPPORT_UTF || !defined COMPILE_PCRE8 + LBL(21) +#endif +#ifdef SUPPORT_UTF + LBL(16) LBL(18) LBL(20) + LBL(22) LBL(23) LBL(28) LBL(30) + LBL(32) LBL(34) LBL(42) LBL(46) +#ifdef SUPPORT_UCP + LBL(36) LBL(37) LBL(38) LBL(39) LBL(40) LBL(41) LBL(44) LBL(45) + LBL(59) LBL(60) LBL(61) LBL(62) +#endif /* SUPPORT_UCP */ +#endif /* SUPPORT_UTF */ + default: + DPRINTF(("jump error in pcre match: label %d non-existent\n", frame->Xwhere)); + +printf("+++jump error in pcre match: label %d non-existent\n", frame->Xwhere); + + return PCRE_ERROR_INTERNAL; + } +#undef LBL +#endif /* NO_RECURSE */ +} + + +/*************************************************************************** +**************************************************************************** + RECURSION IN THE match() FUNCTION + +Undefine all the macros that were defined above to handle this. */ + +#ifdef NO_RECURSE +#undef eptr +#undef ecode +#undef mstart +#undef offset_top +#undef eptrb +#undef flags + +#undef callpat +#undef charptr +#undef data +#undef next +#undef pp +#undef prev +#undef saved_eptr + +#undef new_recursive + +#undef cur_is_word +#undef condition +#undef prev_is_word + +#undef ctype +#undef length +#undef max +#undef min +#undef number +#undef offset +#undef op +#undef save_capture_last +#undef save_offset1 +#undef save_offset2 +#undef save_offset3 +#undef stacksave + +#undef newptrb + +#endif + +/* These two are defined as macros in both cases */ + +#undef fc +#undef fi + +/*************************************************************************** +***************************************************************************/ + + + +/************************************************* +* Execute a Regular Expression * +*************************************************/ + +/* This function applies a compiled re to a subject string and picks out +portions of the string if it matches. Two elements in the vector are set for +each substring: the offsets to the start and end of the substring. + +Arguments: + argument_re points to the compiled expression + extra_data points to extra data or is NULL + subject points to the subject string + length length of subject string (may contain binary zeros) + start_offset where to start in the subject string + options option bits + offsets points to a vector of ints to be filled in with offsets + offsetcount the number of elements in the vector + +Returns: > 0 => success; value is the number of elements filled in + = 0 => success, but offsets is not big enough + -1 => failed to match + < -1 => some kind of unexpected problem +*/ + +#ifdef COMPILE_PCRE8 +PCRE_EXP_DEFN int PCRE_CALL_CONVENTION +pcre_exec(const pcre *argument_re, const pcre_extra *extra_data, + PCRE_SPTR subject, int length, int start_offset, int options, int *offsets, + int offsetcount) +#else +PCRE_EXP_DEFN int PCRE_CALL_CONVENTION +pcre16_exec(const pcre16 *argument_re, const pcre16_extra *extra_data, + PCRE_SPTR16 subject, int length, int start_offset, int options, int *offsets, + int offsetcount) +#endif +{ +int rc, ocount, arg_offset_max; +int newline; +BOOL using_temporary_offsets = FALSE; +BOOL anchored; +BOOL startline; +BOOL firstline; +BOOL utf; +BOOL has_first_char = FALSE; +BOOL has_req_char = FALSE; +pcre_uchar first_char = 0; +pcre_uchar first_char2 = 0; +pcre_uchar req_char = 0; +pcre_uchar req_char2 = 0; +match_data match_block; +match_data *md = &match_block; +const pcre_uint8 *tables; +const pcre_uint8 *start_bits = NULL; +PCRE_PUCHAR start_match = (PCRE_PUCHAR)subject + start_offset; +PCRE_PUCHAR end_subject; +PCRE_PUCHAR start_partial = NULL; +PCRE_PUCHAR req_char_ptr = start_match - 1; + +const pcre_study_data *study; +const REAL_PCRE *re = (const REAL_PCRE *)argument_re; + +/* Check for the special magic call that measures the size of the stack used +per recursive call of match(). */ + +if (re == NULL && extra_data == NULL && subject == NULL && length == -999 && + start_offset == -999) +#ifdef NO_RECURSE + return -sizeof(heapframe); +#else + return match(NULL, NULL, NULL, 0, NULL, NULL, 0); +#endif + +/* Plausibility checks */ + +if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; +if (re == NULL || subject == NULL || (offsets == NULL && offsetcount > 0)) + return PCRE_ERROR_NULL; +if (offsetcount < 0) return PCRE_ERROR_BADCOUNT; +if (start_offset < 0 || start_offset > length) return PCRE_ERROR_BADOFFSET; + +/* Check that the first field in the block is the magic number. If it is not, +return with PCRE_ERROR_BADMAGIC. However, if the magic number is equal to +REVERSED_MAGIC_NUMBER we return with PCRE_ERROR_BADENDIANNESS, which +means that the pattern is likely compiled with different endianness. */ + +if (re->magic_number != MAGIC_NUMBER) + return re->magic_number == REVERSED_MAGIC_NUMBER? + PCRE_ERROR_BADENDIANNESS:PCRE_ERROR_BADMAGIC; +if ((re->flags & PCRE_MODE) == 0) return PCRE_ERROR_BADMODE; + +/* These two settings are used in the code for checking a UTF-8 string that +follows immediately afterwards. Other values in the md block are used only +during "normal" pcre_exec() processing, not when the JIT support is in use, +so they are set up later. */ + +/* PCRE_UTF16 has the same value as PCRE_UTF8. */ +utf = md->utf = (re->options & PCRE_UTF8) != 0; +md->partial = ((options & PCRE_PARTIAL_HARD) != 0)? 2 : + ((options & PCRE_PARTIAL_SOFT) != 0)? 1 : 0; + +/* Check a UTF-8 string if required. Pass back the character offset and error +code for an invalid string if a results vector is available. */ + +#ifdef SUPPORT_UTF +if (utf && (options & PCRE_NO_UTF8_CHECK) == 0) + { + int erroroffset; + int errorcode = PRIV(valid_utf)((PCRE_PUCHAR)subject, length, &erroroffset); + if (errorcode != 0) + { + if (offsetcount >= 2) + { + offsets[0] = erroroffset; + offsets[1] = errorcode; + } +#ifdef COMPILE_PCRE16 + return (errorcode <= PCRE_UTF16_ERR1 && md->partial > 1)? + PCRE_ERROR_SHORTUTF16 : PCRE_ERROR_BADUTF16; +#else + return (errorcode <= PCRE_UTF8_ERR5 && md->partial > 1)? + PCRE_ERROR_SHORTUTF8 : PCRE_ERROR_BADUTF8; +#endif + } + + /* Check that a start_offset points to the start of a UTF character. */ + if (start_offset > 0 && start_offset < length && + NOT_FIRSTCHAR(((PCRE_PUCHAR)subject)[start_offset])) + return PCRE_ERROR_BADUTF8_OFFSET; + } +#endif + +/* If the pattern was successfully studied with JIT support, run the JIT +executable instead of the rest of this function. Most options must be set at +compile time for the JIT code to be usable. Fallback to the normal code path if +an unsupported flag is set. In particular, JIT does not support partial +matching. */ + +#ifdef SUPPORT_JIT +if (extra_data != NULL + && (extra_data->flags & PCRE_EXTRA_EXECUTABLE_JIT) != 0 + && extra_data->executable_jit != NULL + && (extra_data->flags & PCRE_EXTRA_TABLES) == 0 + && (options & ~(PCRE_NO_UTF8_CHECK | PCRE_NOTBOL | PCRE_NOTEOL | + PCRE_NOTEMPTY | PCRE_NOTEMPTY_ATSTART)) == 0) + return PRIV(jit_exec)(re, extra_data->executable_jit, + (const pcre_uchar *)subject, length, start_offset, options, + ((extra_data->flags & PCRE_EXTRA_MATCH_LIMIT) == 0) + ? MATCH_LIMIT : extra_data->match_limit, offsets, offsetcount); +#endif + +/* Carry on with non-JIT matching. This information is for finding all the +numbers associated with a given name, for condition testing. */ + +md->name_table = (pcre_uchar *)re + re->name_table_offset; +md->name_count = re->name_count; +md->name_entry_size = re->name_entry_size; + +/* Fish out the optional data from the extra_data structure, first setting +the default values. */ + +study = NULL; +md->match_limit = MATCH_LIMIT; +md->match_limit_recursion = MATCH_LIMIT_RECURSION; +md->callout_data = NULL; + +/* The table pointer is always in native byte order. */ + +tables = re->tables; + +if (extra_data != NULL) + { + register unsigned int flags = extra_data->flags; + if ((flags & PCRE_EXTRA_STUDY_DATA) != 0) + study = (const pcre_study_data *)extra_data->study_data; + if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) + md->match_limit = extra_data->match_limit; + if ((flags & PCRE_EXTRA_MATCH_LIMIT_RECURSION) != 0) + md->match_limit_recursion = extra_data->match_limit_recursion; + if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0) + md->callout_data = extra_data->callout_data; + if ((flags & PCRE_EXTRA_TABLES) != 0) tables = extra_data->tables; + } + +/* If the exec call supplied NULL for tables, use the inbuilt ones. This +is a feature that makes it possible to save compiled regex and re-use them +in other programs later. */ + +if (tables == NULL) tables = PRIV(default_tables); + +/* Set up other data */ + +anchored = ((re->options | options) & PCRE_ANCHORED) != 0; +startline = (re->flags & PCRE_STARTLINE) != 0; +firstline = (re->options & PCRE_FIRSTLINE) != 0; + +/* The code starts after the real_pcre block and the capture name table. */ + +md->start_code = (const pcre_uchar *)re + re->name_table_offset + + re->name_count * re->name_entry_size; + +md->start_subject = (PCRE_PUCHAR)subject; +md->start_offset = start_offset; +md->end_subject = md->start_subject + length; +end_subject = md->end_subject; + +md->endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0; +md->use_ucp = (re->options & PCRE_UCP) != 0; +md->jscript_compat = (re->options & PCRE_JAVASCRIPT_COMPAT) != 0; +md->ignore_skip_arg = FALSE; + +/* Some options are unpacked into BOOL variables in the hope that testing +them will be faster than individual option bits. */ + +md->notbol = (options & PCRE_NOTBOL) != 0; +md->noteol = (options & PCRE_NOTEOL) != 0; +md->notempty = (options & PCRE_NOTEMPTY) != 0; +md->notempty_atstart = (options & PCRE_NOTEMPTY_ATSTART) != 0; + +md->hitend = FALSE; +md->mark = md->nomatch_mark = NULL; /* In case never set */ + +md->recursive = NULL; /* No recursion at top level */ +md->hasthen = (re->flags & PCRE_HASTHEN) != 0; + +md->lcc = tables + lcc_offset; +md->fcc = tables + fcc_offset; +md->ctypes = tables + ctypes_offset; + +/* Handle different \R options. */ + +switch (options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) + { + case 0: + if ((re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) != 0) + md->bsr_anycrlf = (re->options & PCRE_BSR_ANYCRLF) != 0; + else +#ifdef BSR_ANYCRLF + md->bsr_anycrlf = TRUE; +#else + md->bsr_anycrlf = FALSE; +#endif + break; + + case PCRE_BSR_ANYCRLF: + md->bsr_anycrlf = TRUE; + break; + + case PCRE_BSR_UNICODE: + md->bsr_anycrlf = FALSE; + break; + + default: return PCRE_ERROR_BADNEWLINE; + } + +/* Handle different types of newline. The three bits give eight cases. If +nothing is set at run time, whatever was used at compile time applies. */ + +switch ((((options & PCRE_NEWLINE_BITS) == 0)? re->options : + (pcre_uint32)options) & PCRE_NEWLINE_BITS) + { + case 0: newline = NEWLINE; break; /* Compile-time default */ + case PCRE_NEWLINE_CR: newline = CHAR_CR; break; + case PCRE_NEWLINE_LF: newline = CHAR_NL; break; + case PCRE_NEWLINE_CR+ + PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break; + case PCRE_NEWLINE_ANY: newline = -1; break; + case PCRE_NEWLINE_ANYCRLF: newline = -2; break; + default: return PCRE_ERROR_BADNEWLINE; + } + +if (newline == -2) + { + md->nltype = NLTYPE_ANYCRLF; + } +else if (newline < 0) + { + md->nltype = NLTYPE_ANY; + } +else + { + md->nltype = NLTYPE_FIXED; + if (newline > 255) + { + md->nllen = 2; + md->nl[0] = (newline >> 8) & 255; + md->nl[1] = newline & 255; + } + else + { + md->nllen = 1; + md->nl[0] = newline; + } + } + +/* Partial matching was originally supported only for a restricted set of +regexes; from release 8.00 there are no restrictions, but the bits are still +defined (though never set). So there's no harm in leaving this code. */ + +if (md->partial && (re->flags & PCRE_NOPARTIAL) != 0) + return PCRE_ERROR_BADPARTIAL; + +/* If the expression has got more back references than the offsets supplied can +hold, we get a temporary chunk of working store to use during the matching. +Otherwise, we can use the vector supplied, rounding down its size to a multiple +of 3. */ + +ocount = offsetcount - (offsetcount % 3); +arg_offset_max = (2*ocount)/3; + +if (re->top_backref > 0 && re->top_backref >= ocount/3) + { + ocount = re->top_backref * 3 + 3; + md->offset_vector = (int *)(PUBL(malloc))(ocount * sizeof(int)); + if (md->offset_vector == NULL) return PCRE_ERROR_NOMEMORY; + using_temporary_offsets = TRUE; + DPRINTF(("Got memory to hold back references\n")); + } +else md->offset_vector = offsets; + +md->offset_end = ocount; +md->offset_max = (2*ocount)/3; +md->offset_overflow = FALSE; +md->capture_last = -1; + +/* Reset the working variable associated with each extraction. These should +never be used unless previously set, but they get saved and restored, and so we +initialize them to avoid reading uninitialized locations. Also, unset the +offsets for the matched string. This is really just for tidiness with callouts, +in case they inspect these fields. */ + +if (md->offset_vector != NULL) + { + register int *iptr = md->offset_vector + ocount; + register int *iend = iptr - re->top_bracket; + if (iend < md->offset_vector + 2) iend = md->offset_vector + 2; + while (--iptr >= iend) *iptr = -1; + md->offset_vector[0] = md->offset_vector[1] = -1; + } + +/* Set up the first character to match, if available. The first_char value is +never set for an anchored regular expression, but the anchoring may be forced +at run time, so we have to test for anchoring. The first char may be unset for +an unanchored pattern, of course. If there's no first char and the pattern was +studied, there may be a bitmap of possible first characters. */ + +if (!anchored) + { + if ((re->flags & PCRE_FIRSTSET) != 0) + { + has_first_char = TRUE; + first_char = first_char2 = (pcre_uchar)(re->first_char); + if ((re->flags & PCRE_FCH_CASELESS) != 0) + { + first_char2 = TABLE_GET(first_char, md->fcc, first_char); +#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) + if (utf && first_char > 127) + first_char2 = UCD_OTHERCASE(first_char); +#endif + } + } + else + if (!startline && study != NULL && + (study->flags & PCRE_STUDY_MAPPED) != 0) + start_bits = study->start_bits; + } + +/* For anchored or unanchored matches, there may be a "last known required +character" set. */ + +if ((re->flags & PCRE_REQCHSET) != 0) + { + has_req_char = TRUE; + req_char = req_char2 = (pcre_uchar)(re->req_char); + if ((re->flags & PCRE_RCH_CASELESS) != 0) + { + req_char2 = TABLE_GET(req_char, md->fcc, req_char); +#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) + if (utf && req_char > 127) + req_char2 = UCD_OTHERCASE(req_char); +#endif + } + } + + +/* ==========================================================================*/ + +/* Loop for handling unanchored repeated matching attempts; for anchored regexs +the loop runs just once. */ + +for(;;) + { + PCRE_PUCHAR save_end_subject = end_subject; + PCRE_PUCHAR new_start_match; + + /* If firstline is TRUE, the start of the match is constrained to the first + line of a multiline string. That is, the match must be before or at the first + newline. Implement this by temporarily adjusting end_subject so that we stop + scanning at a newline. If the match fails at the newline, later code breaks + this loop. */ + + if (firstline) + { + PCRE_PUCHAR t = start_match; +#ifdef SUPPORT_UTF + if (utf) + { + while (t < md->end_subject && !IS_NEWLINE(t)) + { + t++; + ACROSSCHAR(t < end_subject, *t, t++); + } + } + else +#endif + while (t < md->end_subject && !IS_NEWLINE(t)) t++; + end_subject = t; + } + + /* There are some optimizations that avoid running the match if a known + starting point is not found, or if a known later character is not present. + However, there is an option that disables these, for testing and for ensuring + that all callouts do actually occur. The option can be set in the regex by + (*NO_START_OPT) or passed in match-time options. */ + + if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0) + { + /* Advance to a unique first char if there is one. */ + + if (has_first_char) + { + if (first_char != first_char2) + while (start_match < end_subject && + *start_match != first_char && *start_match != first_char2) + start_match++; + else + while (start_match < end_subject && *start_match != first_char) + start_match++; + } + + /* Or to just after a linebreak for a multiline match */ + + else if (startline) + { + if (start_match > md->start_subject + start_offset) + { +#ifdef SUPPORT_UTF + if (utf) + { + while (start_match < end_subject && !WAS_NEWLINE(start_match)) + { + start_match++; + ACROSSCHAR(start_match < end_subject, *start_match, + start_match++); + } + } + else +#endif + while (start_match < end_subject && !WAS_NEWLINE(start_match)) + start_match++; + + /* If we have just passed a CR and the newline option is ANY or ANYCRLF, + and we are now at a LF, advance the match position by one more character. + */ + + if (start_match[-1] == CHAR_CR && + (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) && + start_match < end_subject && + *start_match == CHAR_NL) + start_match++; + } + } + + /* Or to a non-unique first byte after study */ + + else if (start_bits != NULL) + { + while (start_match < end_subject) + { + register unsigned int c = *start_match; +#ifndef COMPILE_PCRE8 + if (c > 255) c = 255; +#endif + if ((start_bits[c/8] & (1 << (c&7))) == 0) + { + start_match++; +#if defined SUPPORT_UTF && defined COMPILE_PCRE8 + /* In non 8-bit mode, the iteration will stop for + characters > 255 at the beginning or not stop at all. */ + if (utf) + ACROSSCHAR(start_match < end_subject, *start_match, + start_match++); +#endif + } + else break; + } + } + } /* Starting optimizations */ + + /* Restore fudged end_subject */ + + end_subject = save_end_subject; + + /* The following two optimizations are disabled for partial matching or if + disabling is explicitly requested. */ + + if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0 && !md->partial) + { + /* If the pattern was studied, a minimum subject length may be set. This is + a lower bound; no actual string of that length may actually match the + pattern. Although the value is, strictly, in characters, we treat it as + bytes to avoid spending too much time in this optimization. */ + + if (study != NULL && (study->flags & PCRE_STUDY_MINLEN) != 0 && + (pcre_uint32)(end_subject - start_match) < study->minlength) + { + rc = MATCH_NOMATCH; + break; + } + + /* If req_char is set, we know that that character must appear in the + subject for the match to succeed. If the first character is set, req_char + must be later in the subject; otherwise the test starts at the match point. + This optimization can save a huge amount of backtracking in patterns with + nested unlimited repeats that aren't going to match. Writing separate code + for cased/caseless versions makes it go faster, as does using an + autoincrement and backing off on a match. + + HOWEVER: when the subject string is very, very long, searching to its end + can take a long time, and give bad performance on quite ordinary patterns. + This showed up when somebody was matching something like /^\d+C/ on a + 32-megabyte string... so we don't do this when the string is sufficiently + long. */ + + if (has_req_char && end_subject - start_match < REQ_BYTE_MAX) + { + register PCRE_PUCHAR p = start_match + (has_first_char? 1:0); + + /* We don't need to repeat the search if we haven't yet reached the + place we found it at last time. */ + + if (p > req_char_ptr) + { + if (req_char != req_char2) + { + while (p < end_subject) + { + register int pp = *p++; + if (pp == req_char || pp == req_char2) { p--; break; } + } + } + else + { + while (p < end_subject) + { + if (*p++ == req_char) { p--; break; } + } + } + + /* If we can't find the required character, break the matching loop, + forcing a match failure. */ + + if (p >= end_subject) + { + rc = MATCH_NOMATCH; + break; + } + + /* If we have found the required character, save the point where we + found it, so that we don't search again next time round the loop if + the start hasn't passed this character yet. */ + + req_char_ptr = p; + } + } + } + +#ifdef PCRE_DEBUG /* Sigh. Some compilers never learn. */ + printf(">>>> Match against: "); + pchars(start_match, end_subject - start_match, TRUE, md); + printf("\n"); +#endif + + /* OK, we can now run the match. If "hitend" is set afterwards, remember the + first starting point for which a partial match was found. */ + + md->start_match_ptr = start_match; + md->start_used_ptr = start_match; + md->match_call_count = 0; + md->match_function_type = 0; + md->end_offset_top = 0; + rc = match(start_match, md->start_code, start_match, 2, md, NULL, 0); + if (md->hitend && start_partial == NULL) start_partial = md->start_used_ptr; + + switch(rc) + { + /* If MATCH_SKIP_ARG reaches this level it means that a MARK that matched + the SKIP's arg was not found. In this circumstance, Perl ignores the SKIP + entirely. The only way we can do that is to re-do the match at the same + point, with a flag to force SKIP with an argument to be ignored. Just + treating this case as NOMATCH does not work because it does not check other + alternatives in patterns such as A(*SKIP:A)B|AC when the subject is AC. */ + + case MATCH_SKIP_ARG: + new_start_match = start_match; + md->ignore_skip_arg = TRUE; + break; + + /* SKIP passes back the next starting point explicitly, but if it is the + same as the match we have just done, treat it as NOMATCH. */ + + case MATCH_SKIP: + if (md->start_match_ptr != start_match) + { + new_start_match = md->start_match_ptr; + break; + } + /* Fall through */ + + /* NOMATCH and PRUNE advance by one character. THEN at this level acts + exactly like PRUNE. Unset the ignore SKIP-with-argument flag. */ + + case MATCH_NOMATCH: + case MATCH_PRUNE: + case MATCH_THEN: + md->ignore_skip_arg = FALSE; + new_start_match = start_match + 1; +#ifdef SUPPORT_UTF + if (utf) + ACROSSCHAR(new_start_match < end_subject, *new_start_match, + new_start_match++); +#endif + break; + + /* COMMIT disables the bumpalong, but otherwise behaves as NOMATCH. */ + + case MATCH_COMMIT: + rc = MATCH_NOMATCH; + goto ENDLOOP; + + /* Any other return is either a match, or some kind of error. */ + + default: + goto ENDLOOP; + } + + /* Control reaches here for the various types of "no match at this point" + result. Reset the code to MATCH_NOMATCH for subsequent checking. */ + + rc = MATCH_NOMATCH; + + /* If PCRE_FIRSTLINE is set, the match must happen before or at the first + newline in the subject (though it may continue over the newline). Therefore, + if we have just failed to match, starting at a newline, do not continue. */ + + if (firstline && IS_NEWLINE(start_match)) break; + + /* Advance to new matching position */ + + start_match = new_start_match; + + /* Break the loop if the pattern is anchored or if we have passed the end of + the subject. */ + + if (anchored || start_match > end_subject) break; + + /* If we have just passed a CR and we are now at a LF, and the pattern does + not contain any explicit matches for \r or \n, and the newline option is CRLF + or ANY or ANYCRLF, advance the match position by one more character. In + normal matching start_match will aways be greater than the first position at + this stage, but a failed *SKIP can cause a return at the same point, which is + why the first test exists. */ + + if (start_match > (PCRE_PUCHAR)subject + start_offset && + start_match[-1] == CHAR_CR && + start_match < end_subject && + *start_match == CHAR_NL && + (re->flags & PCRE_HASCRORLF) == 0 && + (md->nltype == NLTYPE_ANY || + md->nltype == NLTYPE_ANYCRLF || + md->nllen == 2)) + start_match++; + + md->mark = NULL; /* Reset for start of next match attempt */ + } /* End of for(;;) "bumpalong" loop */ + +/* ==========================================================================*/ + +/* We reach here when rc is not MATCH_NOMATCH, or if one of the stopping +conditions is true: + +(1) The pattern is anchored or the match was failed by (*COMMIT); + +(2) We are past the end of the subject; + +(3) PCRE_FIRSTLINE is set and we have failed to match at a newline, because + this option requests that a match occur at or before the first newline in + the subject. + +When we have a match and the offset vector is big enough to deal with any +backreferences, captured substring offsets will already be set up. In the case +where we had to get some local store to hold offsets for backreference +processing, copy those that we can. In this case there need not be overflow if +certain parts of the pattern were not used, even though there are more +capturing parentheses than vector slots. */ + +ENDLOOP: + +if (rc == MATCH_MATCH || rc == MATCH_ACCEPT) + { + if (using_temporary_offsets) + { + if (arg_offset_max >= 4) + { + memcpy(offsets + 2, md->offset_vector + 2, + (arg_offset_max - 2) * sizeof(int)); + DPRINTF(("Copied offsets from temporary memory\n")); + } + if (md->end_offset_top > arg_offset_max) md->offset_overflow = TRUE; + DPRINTF(("Freeing temporary memory\n")); + (PUBL(free))(md->offset_vector); + } + + /* Set the return code to the number of captured strings, or 0 if there were + too many to fit into the vector. */ + + rc = (md->offset_overflow && md->end_offset_top >= arg_offset_max)? + 0 : md->end_offset_top/2; + + /* If there is space in the offset vector, set any unused pairs at the end of + the pattern to -1 for backwards compatibility. It is documented that this + happens. In earlier versions, the whole set of potential capturing offsets + was set to -1 each time round the loop, but this is handled differently now. + "Gaps" are set to -1 dynamically instead (this fixes a bug). Thus, it is only + those at the end that need unsetting here. We can't just unset them all at + the start of the whole thing because they may get set in one branch that is + not the final matching branch. */ + + if (md->end_offset_top/2 <= re->top_bracket && offsets != NULL) + { + register int *iptr, *iend; + int resetcount = 2 + re->top_bracket * 2; + if (resetcount > offsetcount) resetcount = ocount; + iptr = offsets + md->end_offset_top; + iend = offsets + resetcount; + while (iptr < iend) *iptr++ = -1; + } + + /* If there is space, set up the whole thing as substring 0. The value of + md->start_match_ptr might be modified if \K was encountered on the success + matching path. */ + + if (offsetcount < 2) rc = 0; else + { + offsets[0] = (int)(md->start_match_ptr - md->start_subject); + offsets[1] = (int)(md->end_match_ptr - md->start_subject); + } + + /* Return MARK data if requested */ + + if (extra_data != NULL && (extra_data->flags & PCRE_EXTRA_MARK) != 0) + *(extra_data->mark) = (pcre_uchar *)md->mark; + DPRINTF((">>>> returning %d\n", rc)); + return rc; + } + +/* Control gets here if there has been an error, or if the overall match +attempt has failed at all permitted starting positions. */ + +if (using_temporary_offsets) + { + DPRINTF(("Freeing temporary memory\n")); + (PUBL(free))(md->offset_vector); + } + +/* For anything other than nomatch or partial match, just return the code. */ + +if (rc != MATCH_NOMATCH && rc != PCRE_ERROR_PARTIAL) + { + DPRINTF((">>>> error: returning %d\n", rc)); + return rc; + } + +/* Handle partial matches - disable any mark data */ + +if (start_partial != NULL) + { + DPRINTF((">>>> returning PCRE_ERROR_PARTIAL\n")); + md->mark = NULL; + if (offsetcount > 1) + { + offsets[0] = (int)(start_partial - (PCRE_PUCHAR)subject); + offsets[1] = (int)(end_subject - (PCRE_PUCHAR)subject); + } + rc = PCRE_ERROR_PARTIAL; + } + +/* This is the classic nomatch case */ + +else + { + DPRINTF((">>>> returning PCRE_ERROR_NOMATCH\n")); + rc = PCRE_ERROR_NOMATCH; + } + +/* Return the MARK data if it has been requested. */ + +if (extra_data != NULL && (extra_data->flags & PCRE_EXTRA_MARK) != 0) + *(extra_data->mark) = (pcre_uchar *)md->nomatch_mark; +return rc; +} + +/* End of pcre_exec.c */ |