diff options
Diffstat (limited to 'src/tools/qdoc/doc/qdoc-manual-contextcmds.qdoc')
-rw-r--r-- | src/tools/qdoc/doc/qdoc-manual-contextcmds.qdoc | 1076 |
1 files changed, 1076 insertions, 0 deletions
diff --git a/src/tools/qdoc/doc/qdoc-manual-contextcmds.qdoc b/src/tools/qdoc/doc/qdoc-manual-contextcmds.qdoc new file mode 100644 index 0000000000..8faf4a7f0d --- /dev/null +++ b/src/tools/qdoc/doc/qdoc-manual-contextcmds.qdoc @@ -0,0 +1,1076 @@ +/**************************************************************************** +** +** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/legal +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:FDL$ +** Commercial License Usage +** Licensees holding valid commercial Qt licenses may use this file in +** accordance with the commercial license agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. For licensing terms and +** conditions see http://qt.digia.com/licensing. For further information +** use the contact form at http://qt.digia.com/contact-us. +** +** GNU Free Documentation License Usage +** Alternatively, this file may be used under the terms of the GNU Free +** Documentation License version 1.3 as published by the Free Software +** Foundation and appearing in the file included in the packaging of +** this file. Please review the following information to ensure +** the GNU Free Documentation License version 1.3 requirements +** will be met: http://www.gnu.org/copyleft/fdl.html. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \page 14-qdoc-commands-contextcommands.html + \previouspage Topic Commands + \contentspage QDoc Manual + \nextpage Document Navigation + + \title Context Commands + + The context commands provide information about the element being + documented that QDoc can't deduce on its own. For example: + \list + \li Is this class thread-safe? + \li Is this function reentrant? + \li Of which module is this class a member ? + \endlist + + Context commands can appear anywhere in a QDoc comment, + but they are normally placed near the top of the comment, just + below the \l {Topic Commands} {topic} command. + + \list + \li \l {16-qdoc-commands-status.html#compat-command}{\\compat}, + \li \l {15-qdoc-commands-navigation.html#contentspage-command}{\\contentspage}, + \li \l {15-qdoc-commands-navigation.html#indexpage-command}{\\indexpage}, + \li \l {19-qdoc-commands-grouping.html#ingroup-command}{\\ingroup}, + \li \l {18-qdoc-commands-relating.html#inherits-command}{\\inherits}, + \li \l {19-qdoc-commands-grouping.html#inmodule-command}{\\inmodule}, + \li \l {16-qdoc-commands-status.html#internal-command}{\\internal}, + \li \l {19-qdoc-commands-grouping.html#mainclass-command}{\\mainclass}, + \li \l {15-qdoc-commands-navigation.html#nextpage-command}{\\nextpage}, + \li \l {17-qdoc-commands-thread.html#nonreentrant-command}{\\nonreentrant}, + \li \l {16-qdoc-commands-status.html#obsolete-command}{\\obsolete}, + \li \l {18-qdoc-commands-relating.html#overload-command}{\\overload}, + \li \l {16-qdoc-commands-status.html#preliminary-command}{\\preliminary}, + \li \l {15-qdoc-commands-navigation.html#previouspage-command}{\\previouspage}, + \li \l {17-qdoc-commands-thread.html#reentrant-command}{\\reentrant}, + \li \l {18-qdoc-commands-relating.html#reimp-command}{\\reimp}, + \li \l {18-qdoc-commands-relating.html#relates-command}{\\relates}, + \li \l {16-qdoc-commands-status.html#since-command}{\\since}, + \li \l {15-qdoc-commands-navigation.html#startpage-command}{\\startpage}, + \li \l {20-qdoc-commands-namingthings.html#subtitle-command}{\\subtitle} + \li \l {17-qdoc-commands-thread.html#threadsafe-command}{\\threadsafe}, + \li \l {20-qdoc-commands-namingthings.html#title-command}{\\title} + \endlist + +*/ + +/*! + \page 15-qdoc-commands-navigation.html + \previouspage Context Commands + \contentspage QDoc Manual + \nextpage Reporting Status + + \title Document Navigation + + The navigation commands are for linking the pages of a document in + a meaningful sequence. Below is a sequence of QDoc comments that + shows a typical use of the navigation commands. + + \section1 Example + \quotefile files/basicqt.qdoc.sample + + QDoc renders the "Getting Started" page in \c{creatingdialogs.html}: + + \quotation + \raw HTML + <table border="0" cellpadding="0" cellspacing="5" width="100%"> + + <tr> + <p> + [Previous: <a href="15-qdoc-commands-navigation.html#deadlink"> + Basic Qt</a>] + [<a href="15-qdoc-commands-navigation.html#deadlink">Contents</a>] + [Next: <a href="15-qdoc-commands-navigation.html#deadlink"> + Creating Dialogs</a>] + </p> + + <h1 align="center">Getting Started<br /></h1> + + <p> + This chapter shows how to combine basic C++ with the + functionality provided by Qt to create a few small graphical + interface (GUI) applications. + </p> + + <p> + [Previous: <a href="15-qdoc-commands-navigation.html#deadlink"> + Basic Qt</a>] + [<a href="15-qdoc-commands-navigation.html#deadlink">Contents</a>] + [Next: <a href="15-qdoc-commands-navigation.html#deadlink"> + Creating Dialogs</a>] + </p> + + </table> + \endraw + \endquotation + + The \l {indexpage-command} {\\indexpage} and \l + {startpage-command} {\\startpage} commands create links to the + page's index page and start page. These links can be used by + browsers and search engines. + + The index page is typically an alphabetical list of the document's + titles and topics, while the start page is the page considered by + the author to be the starting point of a multipage document. + + The links are included in the generated HTML source code, but have + no visual effect on the documentation: + + \code + <head> + ... + <link rel="index" href="index.html" /> + <link rel="start" href="basicqt.html" /> + ... + </head> + \endcode + + \section1 Commands + + \target previouspage-command + \section2 \\previouspage + + The \\previouspage command links the current page to the previous + page in a sequence.a The command has two arguments, each enclosed + by curly braces: the first is the link target (the title of + the previous page), the second is the link text. If the page's + title is equivalent to the link text, the second argument can be + omitted. + + The command must stand alone on its own line. + + \target nextpage-command + \section2 \\nextpage + + The \\nextpage command links the current page to the next page in + a sequence. The command follows the same syntax and argument + convention as the \l {previouspage-command} {\\previouspage} + command. + + \target startpage-command + \section2 \\startpage + + The \\startpage command specifies the first page of a sequence of + pages. The command must stand alone on its own line, and its + unique argument is the title of the first document. + + QDoc will generate a link to the start page and include it in the + generated HTML file, but this has no visual effect on the + documentation. The generated link type tells browsers and search + engines which document is considered by the author to be the + starting point of the collection. + + \target contentspage-command + \section2 \\contentspage + + The \\contentspage command links the current page to a table of + contents page. The command follows the same syntax and argument + convention as the \l {previouspage-command} {\\previouspage} + command. + + \target indexpage-command + \section2 \\indexpage + + The \\indexpage command specifies an index page for the current + document. The command must stand alone on its own line, and its + unique argument is the title of the index document. + + QDoc will generate a link to the index page and include it in the + generated HTML file, but this has no visual effect on the + documentation. The generated link type tells browsers and search + engines which document is considered by the author to be the + index page of the collection. +*/ + + +/*! + \page 16-qdoc-commands-status.html + \previouspage Document Navigation + \contentspage QDoc Manual + \nextpage Thread Support + + \title Reporting Status + + These commands are for indicating that a documented element is + still under development, is becoming obsolete, is provided for + compatibility reasons, or is simply not to be included in the + public interface. The \l {since-command}{\\since} command is for + including information about the version when a function or class + first appeared. + + \target compat-command + \section1 \\compat + + The \\compat command is for indicating that a class or function is + part of the support library provided to keep old source code + working. + + The command must stand on its own line. + + Usually an equivalent function or class is provided as an + alternative. + + If the command is used in the documentation of a class, the + command expands to a warning that the referenced class is part of + the support library. The warning is located at the top of the + documentation page. + + \code + \beginqdoc + \class MyQt3SupportClass + \compat + \endqdoc + \endcode + + QDoc renders this at the top of the MyQt3SupportClass class + reference page. + + \quotation + \b {This class is part of the Qt 3 support + library.} It is provided to keep old source code + working. We strongly advise against using it in new + code. See the \l + {http://doc.qt.digia.com/4.0/porting4.html} {Porting + Guide} for more information. + \endquotation + + If the command is used when documenting a function, QDoc will + create and link to a separate page documenting Qt 3 support + members when generating the reference documentation for the + associated class. + + \code + \beginqdoc + \fn MyClass::MyQt3SupportMemberFunction + \compat + + Use MyNewFunction() instead. + \endqdoc + \endcode + + QDoc renders this in \c{myclass-qt3.html} as: + + \quotation + \raw HTML + <h1>Qt 3 Support Members for MyClass</h1> + \endraw + + \b {The following class members are part of the Qt 3 + support layer.} They are provided to help you port old code to + Qt 4. We advise against using them in new code. + + ... + + \list + \li void MyQt3SupportMemberFunction() + \li ... + \endlist + + \raw HTML + <hr /> + <h2>Member Function Documentation</h2> + <h3>void MyQt3SupportMemberFunction ()</h3> + <p>Use MyNewFunction() instead.</p> + \endraw + ... + \endquotation + + \target default-command + \section1 \\default + + The \\default command is for marking a QML property as the + \l {http://qt-project.org/doc/qt-4.7/qdeclarativeintroduction.html#default-properties} + {default property}. The word \span {class="newStuff"} {default} is shown in red in + the documentation of the property. + + \code + / *! + \qmlproperty list<Change> State::changes + This property holds the changes to apply for this state. + \default + + By default these changes are applied against the default state. If the state + extends another state, then the changes are applied against the state being + extended. + * / + \endcode + + See how QDoc renders this property on the reference page for the + \l {http://qt-project.org/doc/qt-4.7/qml-state.html#changes-prop} {State} + type. + + \target obsolete-command + \section1 \\obsolete + + The \\obsolete command is for indicating that a function is being + deprecated, and it should no longer be used in new code. There is + no guarantee for how long it will remain in the library. + + The command must stand on its own line. + + When generating the reference documentation for a class, QDoc will + create and link to a separate page documenting its obsolete + functions. Usually an equivalent function is provided as an + alternative. + + \code + / *! + \fn MyClass::MyObsoleteFunction + \obsolete + + Use MyNewFunction() instead. + * / + \endcode + + QDoc renders this in \c{myclass-obsolete.html} as: + + \quotation + \raw HTML + <h1>Obsolete Members for MyClass</h1> + \endraw + + \b {The following class members are obsolete.} They are + provided to keep old source code working. We strongly advise + against using them in new code. + + ... + + \list + \li void MyObsoleteFunction() \c (obsolete) + \li ... + \endlist + + \raw HTML + <hr /> + <h2>Member Function Documentation</h2> + <h3>void MyObsoleteFunction ()</h3> + <p>Use MyNewFunction() instead.</p> + \endraw + ... + \endquotation + + \target internal-command + \section1 \\internal + + The \\internal command indicates that the referenced + function is not part of the public interface. + + The command must stand on its own line. + + QDoc ignores the documentation as well as the documented item, + when generating the associated class reference documentation. + + \code + / *! + \internal + + Tries to find the decimal separator. If it can't find + it and the thousand delimiter is != '.' it will try to + find a '.'; + * / + int QDoubleSpinBoxPrivate::findDelimiter + (const QString &str, int index) const + { + int dotindex = str.indexOf(delimiter, index); + if (dotindex == -1 && thousand != dot && delimiter != dot) + dotindex = str.indexOf(dot, index); + return dotindex; + } + \endcode + + This function will not be included in the documentation. + + \target preliminary-command + \section1 \\preliminary + + The \\preliminary command is for indicating that a referenced + function is still under development. + + The command must stand on its own line. + + The \\preliminary command expands to a notification in the + function documentation, and marks the function as preliminary when + it appears in lists. + + \code + / *! + \preliminary + + Returns information about the joining properties of the + character (needed for certain languages such as + Arabic). + * / + QChar::Joining QChar::joining() const + { + return ::joining(*this); + } + \endcode + + QDoc renders this as: + + \quotation + \raw HTML + <h3> + <a href="http://qt-project.org/doc/qt-5.0/qtcore/qchar.html#Joining-enum">Joining</a> + QChar::joining () const</h3> + \endraw + + \b {This function is under development and + subject to change.} + + Returns information about the joining properties of the + character (needed for certain languages such as + Arabic). + \endquotation + + And the function's entry in QChar's list of functions will be + rendered as: + + \quotation + \list + \li ... + \li Joining + \l {http://qt-project.org/doc/qt-5.0/qtcore/qchar.html#Joining-enum} + {joining}() + const \c (preliminary) + \li ... + \endlist + \endquotation + + \target since-command + \section1 \\since + + The \\since command tells in which minor release + the associated functionality was added. + + \code + / *! + \since 4.1 + + Returns an icon for \a standardIcon. + + ... + + \sa standardPixmap() + * / + QIcon QStyle::standardIcon(StandardPixmap standardIcon, const QStyleOption *option, const QWidget *widget) const + { + } + \endcode + + QDoc renders this as: + + \quotation + \raw HTML + <h3>QIcon QStyle::standardIcon(StandardPixmap standardIcon, const QStyleOption *option, const QWidget *widget) const</h3> + \endraw + + This function was introduced in Qt version 4.1 + + Returns an icon for \a standardIcon. + + ... + + See also \l {QStyle::standardPixmap()} {standardPixmap()}. + \endquotation + + QDoc generates the "Qt" reference from the \l + {25-qdoc-configuration-derivedprojects.html#project} {\c project} + configuration variable. For that reason this reference will change + according to the current documentation project. + + See also \l {25-qdoc-configuration-derivedprojects.html#project} + {\c project}. +*/ + + +/*! + \page 17-qdoc-commands-thread.html + \previouspage Reporting Status + \contentspage QDoc Manual + \nextpage Relating Things + + \title Thread Support + + The thread support commands are for specifying the level of + support for multithreaded programming in a class or function. + There are three levels of support: \c threadsafe, \c reentrant and + \c nonreentrant. + + The default is \c nonreentrant which means that the associated + class or function cannot be called by multiple threads. \c + Reentrant and \c threadsafe are levels primarily used for classes. + + \c Reentrant means that all the functions in the referenced class + can be called simultaneously by multiple threads, provided that + each invocation of the functions reference unique data. While \c + threadsafe means that all the functions in the referenced class + can be called simultaneously by multiple threads even when each + invocation references shared data. + + When a class is marked \l {reentrant-command} {\\reentrant} or \l + {threadsafe-command} {\\threadsafe}, functions in that class can + be marked \c nonreentrant using the \l {nonreentrant-command} + {\\nonreentrant} command. + + \section1 Example + + \target reentrant-example + \code + \beginqdoc + \class QLocale + \brief The QLocale class converts between numbers and their + string representations in various languages. + + \reentrant + \ingroup i18n + \ingroup text + \mainclass + + QLocale is initialized with a language/country pair in its + constructor and offers number-to-string and string-to-number + conversion functions similar to those in QString. + + ... + + \nonreentrant + + Sets the global default locale to \a locale. These values are + used when a QLocale object is constructed with no + arguments. If this function is not called, the system's locale + is used. + + \warning In a multithreaded application, the default locale + should be set at application startup, before any non-GUI + threads are created. + + \sa system(), c() + \endqdoc + void QLocale::setDefault(const QLocale &locale) + { + default_d = locale.d; + } + \endcode + + QDoc renders this as: + + \quotation + \raw HTML + <h1><center>QLocale Class Reference</center></h1> + \endraw + + The QLocale class converts between numbers and their string + representations in various languages. More... + + \code + #include <QLocale> + \endcode + + \b {Note:} All the functions in this class are \l + {17-qdoc-commands-thread.html#reentrant} {reentrant}, except \l + {QLocale::setDefault()} {setDefault()}. + + ... + + \raw HTML + <hr /> + <h2>Member Type Documentation</h2> + \endraw + + ... + + \raw HTML + <h3>void QLocale::setDefault ( const QLocale & locale ) </h3> + \endraw + + Sets the global default locale to locale. These values are + used when a QLocale object is constructed with no + arguments. If this function is not called, the system's locale + is used. + + \warning In a multithreaded application, the default locale + should be set at application startup, before any non-GUI + threads are created. + + \warning This function is not reentrant. + + See also \l {QLocale::system()} {system()} and \l + {QLocale::c()} {c()}. + + ... + \endquotation + + As shown above, QDoc generates a notification when a class is + declared reentrant, and lists the exceptions (the declared + nonreentrant functions). A link to the general documentation on \l + {17-qdoc-commands-thread.html#reentrant} {reentrancy and thread-safety} is + included. In addition a warning, "\b Warning: This function is + not reentrant.", is generated in the nonreentrant functions' + documentation. + + QDoc will generate the same notification and warnings when a class + is declared threadsafe. + + For more information see the general documentation on \l + {17-qdoc-commands-thread.html#reentrant} {reentrancy and thread-safety}. + + \section1 Commands + + \target threadsafe-command + \section2 \\threadsafe + + The \\threadsafe command includes a line in the documentation to + indicate that the associated class or function is \e threadsafe + and can be called simultaneously by multiple threads, even when + separate invocations reference shared data. + + The command must stand on its own line. + + The documentation generated from this command will be similar to + the what is generated for the \l {reentrant-command} {\\reentrant} + command. See the example above in the \l {reentrant-example} + {introduction}. + + See also \l{reentrant-command} {\\reentrant} and + \l{nonreentrant-command} {\\nonreentrant}. + + \target reentrant-command + \section2 \\reentrant + + The \\reentrant command indicates that the associated class or + function can be called simultaneously by multiple threads, + provided that each invocation references its own data. See the \l + {reentrant-example} {example} above. + + The command must stand on its own line. + + See also \l{nonreentrant-command} {\\nonreentrant} and + \l{threadsafe-command} {\\threadsafe}. + + \target nonreentrant-command + \section2 \\nonreentrant + + The \\nonreentrant command indicates that the associated class or + function cannot be called by multiple threads. Nonreentrant is the + default case. + + The command must stand on its own line. + + When a class is marked \l {reentrant-command} {\\reentrant} or \l + {threadsafe-command} {\\threadsafe}, functions in that class can + be marked \c nonreentrant using this command in the \l{fn-command} + {\\fn} comment of the functions to be excluded. + + See also \l{reentrant-command} {\\reentrant} and + \l{threadsafe-command} {\\threadsafe}. +*/ + + / *! + +/*! + \page 18-qdoc-commands-relating.html + \previouspage Thread Support + \contentspage QDoc Manual + \nextpage Grouping Things + + \title Relating Things + + The relating commands are for specifying how one documented + element relates to another documented element. Some examples: + \list + \li This function is an overload of another function. + \li This function is a reimplementation of another function. + \li This typedef is \e related to some class or header file. + \endlist + + There is also a command for documenting that a QML type inherits + some other QML type. + + \section1 Commands + + \target inherits-command + \section2 \\inherits + + The \\inherits command is for documenting that one QML type + inherits some other QML type. It must be included in the + inheriting element's \l{qmltype-command}{\\qmltype} comment. + The argument is the name of the inherited QML type. + + \code + / *! + \qmltype PauseAnimation + \instantiates QDeclarativePauseAnimation + \ingroup qml-animation-transition + \since 4.7 + \inherits Animation + \brief The PauseAnimation element provides a pause for an animation. + + When used in a SequentialAnimation, PauseAnimation is a step + when nothing happens, for a specified duration. + + A 500ms animation sequence, with a 100ms pause between two animations: + + SequentialAnimation { + NumberAnimation { ... duration: 200 } + PauseAnimation { duration: 100 } + NumberAnimation { ... duration: 200 } + } + + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} + * / + \endcode + + QDoc includes this line on the reference page for the + \l{http://qt-project.org/doc/qt-4.7/qml-pauseanimation.html} {PauseAnimation} + element: + + \quotation + Inherits \l{http://qt-project.org/doc/qt-4.7/qml-animation.html} {Animation} + \endquotation + + \target overload-command + \section2 \\overload + + The \\overload command is for indicating that a function is a + secondary overload of its name. + + The command must stand on its own line. + + For a function name that is overloaded (except constructors), QDoc + expects one primary version of the function, and all the others + marked with the \b {\\overload command}. The primary version + should be fully documented. Each overload can have whatever extra + documentation you want to add for just that overloaded version. + + From Qt 4.5, you can include the function name plus '()' as a + parameter to the \b{\\overload} command, which will include a + standard \e{This function overloads...} line of text with a link + to the documentation for the primary version of the function. + + \code + / *! + \overload addAction() + + This convenience function creates a new action with an + \a icon and some \a text. The function adds the newly + created action to the menu's list of actions, and + returns it. + + \sa QWidget::addAction() + * / + QAction *QMenu::addAction(const QIcon &icon, const QString &text) + { + QAction *ret = new QAction(icon, text, this); + addAction(ret); + return ret; + } + \endcode + + QDoc renders this as: + + \quotation + \raw HTML + <h3><a href="http://qt-project.org/doc/qt-5.0/qtwidgets/qaction.html">QAction</a> + * QMenu::addAction ( const QIcon & <i>icon</i>, + const QString & <i>text</i> ) + </h3> + \endraw + + This function overloads \l {http://qt-project.org/doc/qt-5.0/qtwidgets/qwidget.html#addAction} {addAction()} + + This convenience function creates a new action with an + \e icon and some \e text. The function adds the newly + created action to the menu's list of actions, and + returns it. + + See also + \l {http://qt-project.org/doc/qt-5.0/qtwidgets/qwidget.html#addAction} + {QWidget::addAction}(). + \endquotation + + If you don't include the function name with the \b{\\overlaod} + command, then instead of the "This function overloads..." line + with the link to the documentation for the primary version, you + get the old standard line: + + \quotation + This is an overloaded member function, provided for + convenience. + \endquotation. + + \target reimp-command + \section2 \\reimp + + The \\reimp command is for indicating that a function is a + reimplementation of a virtual function. + + The command must stand on its own line. + + QDoc will omit the reimplemented function from the class + reference. + + \code + / *! + \reimp + * / + void QToolButton::nextCheckState() + { + Q_D(QToolButton); + if (!d->defaultAction) + QAbstractButton::nextCheckState(); + else + d->defaultAction->trigger(); + } + \endcode + + This function will not be included in the documentation. Instead, + a link to the base function QAbstractButton::nextCheckState() will + appear in the documentation. + + \target relates-command + \section2 \\relates + + The \\relates command is for including the documentation of a + global element to some class or header file. The argument is a + class name or header file. + + \code + / *! + \relates QChar + + Reads a char from the stream \a in into char \a chr. + + \sa {Format of the QDataStream operators} + * / + QDataStream &operator>>(QDataStream &in, QChar &chr) + { + quint16 u; + in >> u; + chr.unicode() = ushort(u); + return in; + } + \endcode + + The documentation for this function will be included on the reference page + for class QChar. +*/ + +/*! + \page 19-qdoc-commands-grouping.html + \previouspage Relating Things + \contentspage QDoc Manual + \nextpage Naming Things + + \title Grouping Things + + The grouping commands relate classes to defined groups and + modules. The groups are used when generating lists of related + classes in the documentation, while the modules are elements of + Qt's structure. + + \section1 Commands + + \target mainclass-command + \section2 \\mainclass + + The \\mainclass command relates the documented class to + a group called mainclasses. + + The command must stand on its own line. + + \code + / *! + \class QWidget qwidget.h + \brief The QWidget class is the base class of + all user interface objects. + + \mainclass + + ... + * / + \endcode + + This will include the QWidget class in the \e mainclasses + group, which means, for example, that the class will appear on the + list created by calling the \l {generatelist-command} + {\\generatelist} command with the \c mainclasses argument: + + \l http://doc.qt.digia.com/4.0/mainclasses.html + + \note The Qt documentation no longer includes the \e mainclasses + page. + + See also \l {generatelist-command} {\\generatelist}. + + \target ingroup-command + \section2 \\ingroup + + The \\ingroup command indicates that the given + overview or documented class belongs to a certain group of + related docmentation. + + A class or overview may belong to many groups. + + The \\ingroup command's argument is a group name, but note + that the command considers the rest of the line as part of + its argument. Make sure that the group name is followed by + a linebreak. + + \code + / *! + \class QDir + \brief The QDir class provides access to directory + structures and their contents. + + \ingroup io + ... + * / + \endcode + + This will include the QDir class in the \c io group, which means, + for example, that QDir will appear on the list created by calling + the \l {group-command} {\\group} command with the \c io argument. + + To list overviews that are related to a certain group, you must + generate the list explicitly using the \l {generatelist-command} + {\\generatelist} command with the \c related argument. + + See also \l {group-command} {\\group}. + + \target inmodule-command + \section2 \\inmodule + + The \\inmodule command relates a class to the module specified by + the command's argument. + + For the basic classes in Qt, a class's module is determined by its + location, namely its directory. However, for extensions like + ActiveQt and Qt Designer, a class must be related to a module + explicitly. + + The command's argument is a module name, but note that the command + considers the rest of the line as part of its argument. Make sure + that the module name is followed by a linebreak. + + \code + /*! + \class QDesignerTaskMenuExtension + \inmodule QtDesigner + * / + \endcode + + This ensures that the QDesignerTaskMenuExtension class is included + in the Qt Designer module, which means, for example, that the + class will appear on the list created by calling the \l + {generatelist-command} {\\generatelist} command with the \c + {{classesbymodule QtDesigner}} argument. + + See also \l {module-command} {\\module} and \l + {generatelist-command} {\\generatelist}. +*/ + +/*! + \page 20-qdoc-commands-namingthings.html + \previouspage Grouping Things + \contentspage QDoc Manual + \nextpage Markup Commands + + \title Naming Things + + In general, a title command considers everything that follows it + until the first line break as its argument. If the title is so + long it must span multiple lines, end each line (except the last + one) with a backslash. + + \section1 Commands + + \target title-command + \section2 \\title + + The \\title command sets the title for a documentation page, or + allows you to override it. + + \code + / *! + \page signalandslots.html + + \title Signals & Slots + + Signals and slots are used for communication between + objects. The signals and slots mechanism is a central + feature of Qt, and probably the part that differs most + from the features provided by other frameworks. + + ... + * / + \endcode + + QDoc renders this as: + + \quotation + \raw HTML + <h1><center>Signal and Slots</center></h1> + \endraw + + Signals and slots are used for communication between + objects. The signals and slots mechanism is a central + feature of Qt and probably the part that differs most + from the features provided by other frameworks. + ... + \endquotation + See also \l {subtitle-command} {\\subtitle}. + + \target subtitle-command + \section2 \\subtitle + + The \\subtitle command sets a subtitle for a documentation page. + + \code + \beginqdoc + \page qtopiacore-overview.html + + \title Qtopia Core + \subtitle Qt for Embedded Linux + + Qt/Embedded, the embedded Linux port of Qt, is a + complete and self-contained C++ GUI and platform + development tool for Linux-based embedded development. + ... + \endqdoc + \endcode + + QDoc renders this as: + + \quotation + \raw HTML + <h1><center>Qtopia Core</center></h1> + <h2><center>Qt for Embedded Linux</center></h2> + \endraw + + Qt/Embedded, the embedded Linux port of Qt, is a + complete and self-contained C++ GUI and platform + development tool for Linux-based embedded development. + ... + \endquotation + + See also \l {title-command} {\\title}. + +*/ |