diff options
Diffstat (limited to 'src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc')
-rw-r--r-- | src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc | 4050 |
1 files changed, 0 insertions, 4050 deletions
diff --git a/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc b/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc deleted file mode 100644 index d764cde89d..0000000000 --- a/src/tools/qdoc/doc/qdoc-manual-markupcmds.qdoc +++ /dev/null @@ -1,4050 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2015 The Qt Company Ltd. -** Contact: http://www.qt.io/licensing/ -** -** This file is part of the documentation of the Qt Toolkit. -** -** $QT_BEGIN_LICENSE:FDL$ -** Commercial License Usage -** Licensees holding valid commercial Qt licenses may use this file in -** accordance with the commercial license agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and The Qt Company. For licensing terms -** and conditions see http://www.qt.io/terms-conditions. For further -** information use the contact form at http://www.qt.io/contact-us. -** -** GNU Free Documentation License Usage -** Alternatively, this file may be used under the terms of the GNU Free -** Documentation License version 1.3 as published by the Free Software -** Foundation and appearing in the file included in the packaging of -** this file. Please review the following information to ensure -** the GNU Free Documentation License version 1.3 requirements -** will be met: http://www.gnu.org/copyleft/fdl.html. -** $QT_END_LICENSE$ -** -****************************************************************************/ - -/*! - \page 03-qdoc-commands-markup.html - \contentspage QDoc Manual - \previouspage Naming Things - \nextpage Text Markup - - \title Markup Commands - - The markup commands indicate the generated documentation's visual - appearance and logical structure. - - \list - \li \l {a-command} {\\a} - \li \l {abstract-command} {\\abstract} - \li \l {annotatedlist-command} {\\annotatedlist} - \li \l {b-command} {\\b} \span {class="newStuff"} - \li \l {b-command} {\\bold} {(deprecated, use \\b)} - \li \l {brief-command} {\\brief} - \li \l {c-command} {\\c} - \li \l {caption-command} {\\caption} - \li \l {chapter-command} {\\chapter} - \li \l {code-command} {\\code} - \li \l {codeline-command} {\\codeline} - \li \l {div-command} {\\div} - \li \l {dots-command} {\\dots} - \li \l {e-command} {\\e} \span {class="newStuff"} - \li \l {else-command} {\\else} - \li \l {endif-command} {\\endif} - \li \l {footnote-command} {\\footnote} - \li \l {generatelist-command} {\\generatelist} - \li \l {header-command} {\\header} - \li \l {e-command} {\\i} \span {class="newStuff"} {(deprecated, use \\e)} - \li \l {if-command} {\\if} - \li \l {image-command} {\\image} - \li \l {include-command} {\\include} - \li \l {include-command} {\\input} - \li \l {inlineimage-command} {\\inlineimage} - \li \l {keyword-command} {\\keyword} - \li \l {l-command} {\\l} - \li \l {legalese-command} {\\legalese} - \li \l {li-command} {\\li} \span {class="newStuff"} - \li \l {list-command} {\\list} - \li \l {meta-command} {\\meta} - \li \l {newcode-command} {\\newcode} - \li \l {li-command} {\\o} \span {class="newStuff"} {(deprecated, use \\li)} - \li \l {note-command} {\\note} - \li \l {oldcode-command} {\\oldcode} - \li \l {omit-command} {\\omit} - \li \l {part-command} {\\part} - \li \l {printline-command} {\\printline} - \li \l {printto-command} {\\printto} - \li \l {printuntil-command} {\\printuntil} - \li \l {quotation-command} {\\quotation} - \li \l {quotefile-command} {\\quotefile} - \li \l {quotefromfile-command} {\\quotefromfile} - \li \l {raw-command} {\\raw} - \li \l {row-command} {\\row} - \li \l {sa-command} {\\sa} - \li \l {sectionOne-command} {\\section1} - \li \l {sectionTwo-command} {\\section2} - \li \l {sectionThree-command} {\\section3} - \li \l {sectionFour-command} {\\section4} - \li \l {skipline-command} {\\skipline} - \li \l {skipto-command} {\\skipto} - \li \l {skipuntil-command} {\\skipuntil} - \li \l {snippet-command} {\\snippet} - \li \l {span-command} {\\span} - \li \l {sub-command} {\\sub} - \li \l {sup-command} {\\sup} - \li \l {table-command} {\\table} - \li \l {tableofcontents-command} {\\tableofcontents} - \li \l {target-command} {\\target} - \li \l {tt-command} {\\tt} - \li \l {uicontrol-command} {\\uicontrol} {(new 25/3/2012)} - \li \l {underline-command} {\\underline} - \li \l {raw-command} {\\unicode} - \li \l {warning-command} {\\warning} - \li \l {backslash-command} {\\\\} - \endlist -*/ - - -/*! - \page 04-qdoc-commands-textmarkup.html - \contentspage QDoc Manual - \previouspage Markup Commands - \nextpage Document Structure - - \title Text Markup - - The text formatting commands indicate how text is to be rendered. - - \target a-command - \section1 \\a (parameter marker) - - The \\a command tells QDoc the next word is a formal parameter name. - - A warning is emitted when a formal parameter is not documented or - is misspelled, so when you document a function you should mention - each formal parameter by name in the function description, - preceded by the \\a command. The parameter name is then rendered - in italics. - - \code - / *! - Constructs a line edit containing the text - \a contents. The \a parent parameter is sent - to the QWidget constructor. - * / - - QLineEdit::QLineEdit(const QString &contents, QWidget *parent) :QWidget(parent) - { - ... - } - - \endcode - - QDoc renders this as: - - \quotation - \b {QLineEdit::QLineEdit ( const QString & - contents, QWidget *parent )} - - Constructs a line edit containing the text \a contents. - The \a parent parameter is sent to the QWidget constructor. - \endquotation - - The formal parameter name may be enclosed between curly brackets, - but that isn't required. - - \target c-command - \section1 \\c (code font) - - The \\c command is used for rendering variable names, user-defined - class names, and C++ keywords (for example, \c int and \c for) in the code - font. - - The command renders its argument using a monospace font. For - example: - - \code - / *! - The \c AnalogClock class provides a clock widget with hour - and minute hands that is automatically updated every - few seconds. - * / - \endcode - - QDoc renders this as: - - \quotation - The \c AnalogClock class provides a clock widget with hour - and minute hands, which are automatically updated every - few seconds. - \endquotation - - If the text to be rendered in the code font contains spaces, enclose the - entire text in curly brackets. - - \code - \c {QLineEdit::QLineEdit(const QString &contents, QWidget *parent) :QWidget(parent)} - \endcode - - QDoc renders this as: - - \quotation - \c {QLineEdit::QLineEdit(const QString &contents, QWidget *parent) :QWidget(parent)} - \endquotation - - The \\c command accepts the special character \c \ within its - argument, which renders it as a normal character. So if you want - to use nested commands, you must use the \l {tt-command} {teletype - (\\tt)} command instead. - - See also \l {tt-command} {\\tt} and \l {code-command} {\\code}. - - \target div-command - \section1 \\div - - The \\div and \\enddiv commands delimit a large or small block of - text (which may include other QDoc commands) to which special - formatting attributes should be applied. - - An argument must be provided in curly braces, as in the qdoc - comment shown below. The argument is not interpreted but is used - as attribute(s) of the tag that is output by qdoc. - - For example, we might want to render an inline image so that it - floats to the right of the current block of text: - - \code - / *! - \div {class="float-right"} - \inlineimage qml-column.png - \enddiv - - * / - \endcode - - If qdoc is generating HTML, it will translate these commands to: - - \code - <div class="float-right"><p><img src="images/qml-column.png" /></p></div> - \endcode - - For HTML, the attribute value \e {float-right} then will refer to - a clause in the style.css file, which in this case could be: - - \code - div.float-right - { - float: right; margin-left: 2em - } - \endcode - - If qdoc is generating DITA XML, it will translate the commands to: - - \code - <sectiondiv outputclass="float-right"> - <p> - <fig> - <image href="images/qml-column.png" placement="inline"/> - </fig> - </p> - </sectiondiv> - \endcode - - Your DITA XML publishing program must then recognize the \e - {outputclass} attribute value. - - \note Note that the \b {\\div} command can be nested. - - Below you can find an example taken from the index.qdoc file used to - generate index.html for Qt 4.7: - - \code - \div {class="indexbox guide"} - \div {class="heading"} - Qt Developer Guide - \enddiv - \div {class="indexboxcont indexboxbar"} - \div {class="section indexIcon"} \emptyspan - \enddiv - \div {class="section"} - Qt is a cross-platform application and UI - framework. Using Qt, you can write web-enabled - applications once and deploy them across desktop, - mobile and embedded operating systems without - rewriting the source code. - \enddiv - \div {class="section sectionlist"} - \list - \li \l{Getting Started} - \li \l{Installation} {Installation} - \li \l{how-to-learn-qt.html} {How to learn Qt} - \li \l{tutorials.html} {Tutorials} - \li \l{Qt Examples} {Examples} - \li \l{qt4-7-intro.html} {What's new in Qt 4.7} - \endlist - \enddiv - \enddiv - \enddiv - \endcode - - When all the class attribute values are defined as they are in the - style.css file that is used for rendering the Qt documentation, - the above example is rendered as: - - \div {class="indexbox guide"} - \div {class="heading"} - Qt Developer Guide - \enddiv - \div {class="indexboxcont indexboxbar"} - \div {class="section indexIcon"} \emptyspan - \enddiv - \div {class="section"} - Qt is a cross-platform application and UI - framework. Using Qt, you can write web-enabled - applications once and deploy them across desktop, - mobile and embedded operating systems without - rewriting the source code. - \enddiv - \div {class="section sectionlist"} - \list - \li Getting Started - \li Installation - \li How to learn Qt - \li Tutorials - \li Examples - \li What's new in Qt 4.7 - \endlist - \enddiv - \enddiv - \enddiv - - When generating DITA XML, qdoc outputs the nested \e {div} commands as: - - \code - <sectiondiv outputclass="indexbox guide"> - <sectiondiv outputclass="heading"> - <p>Qt Developer Guide</p> - </sectiondiv> - <sectiondiv outputclass="indexboxcont indexboxbar"> - <sectiondiv outputclass="section indexIcon"/> - <sectiondiv outputclass="section"> - <p>Qt is a cross-platform application and UI - framework. Using Qt, you can write - web-enabled applications once and deploy - them across desktop, mobile and embedded - operating systems without rewriting the - source code. - </p> - </sectiondiv> - <sectiondiv outputclass="section sectionlist"> - <ul> - <li> - <xref href="gettingstarted.xml#id-606ee7a8-219b-47b7-8f94-91bc8c76e54c">Getting started</xref> - </li> - <li> - <xref href="installation.xml#id-075c20e2-aa1e-4f88-a316-a46517e50443">Installation</xref> - </li> - <li> - <xref href="how-to-learn-qt.xml#id-49f509b5-52f9-4cd9-9921-74217b9a5182">How to learn Qt</xref> - </li> - <li> - <xref href="tutorials.xml#id-a737f955-a904-455f-b4aa-0dc69ed5a64f">Tutorials</xref> - </li> - <li> - <xref href="all-examples.xml#id-98d95159-d65b-4706-b08f-13d80080448d">Examples</xref> - </li> - <li> - <xref href="qt4-7-intro.xml#id-519ae0e3-4242-4c2a-b2be-e05d1e95f177">What's new in Qt 4.7</xref> - </li> - </ul> - </sectiondiv> - </sectiondiv> - </sectiondiv> - \endcode - - Your DITA XML publishing program must recognize the values of the - \e {outputclass} attribute. - - See also \l {span-command} {\\span}. - - \target span-command - \section1 \\span - - The \\span command applies special formatting to a small block of text. - - Two arguments must be provided, each argument in curly braces, as - shown in the QDoc comment below. The first argument is not - interpreted, but specifies the formatting attribute(s) of the tag - output by QDoc. The second argument is the text to be rendered with - the special formatting attributes. - - For example, we might want to render the first word of each - element in a numeric list in blue. - - \code - / *! - Global variables with complex types: - \list 1 - \li \span {class="variableName"} {mutableComplex1} in globals.cpp at line 14 - \li \span {class="variableName"} {mutableComplex2} in globals.cpp at line 15 - \li \span {class="variableName"} {constComplex1} in globals.cpp at line 16 - \li \span {class="variableName"} {constComplex2} in globals.cpp at line 17 - \endlist - * / - \endcode - - Class \e {variableName} refers to a clause in your style.css. - - \code - .variableName - { - font-family: courier; - color: blue - } - \endcode - - Using the \e {variableName} clause shown above, the example is rendered as: - - Global variables with complex types: - \list 1 - \li \span {class="variableName"} {mutableComplex1} in globals.cpp at line 14 - \li \span {class="variableName"} {mutableComplex2} in globals.cpp at line 15 - \li \span {class="variableName"} {constComplex1} in globals.cpp at line 16 - \li \span {class="variableName"} {constComplex2} in globals.cpp at line 17 - \endlist - - \note The \b span command does not cause a new paragraph to be - started. - - See also \l {div-command} {\\div}. - - \target tt-command - \section1 \\tt (teletype font) - - The \\tt command renders its argument in a monospace font. This - command behaves just like the \l {c-command} {\\c} command, except - that \\tt allows you to nest QDoc commands within the argument - (e.g. \l {e-command} {\\e}, \l {b-command} {\\b} and \l - {underline-command} {\\underline}). - - \code - / *! - After having populated the main container with - child widgets, \c setupUi() scans the main container's list of - slots for names with the form - \tt{on_\e{objectName}_\e{signalName}().} - * / - \endcode - - QDoc renders this as: - - \quotation - After having populated the main container with - child widgets, \c setupUi() scans the main container's list of - slots for names with the form - \tt{on_\e{objectName}_\e{signalName}().} - \endquotation - - If the text to be rendered in the code font contains spaces, enclose the - entire text in curly brackets. - - \code - \tt {QLineEdit::QLineEdit(const QString &contents, QWidget *parent) :QWidget(parent)} - \endcode - - QDoc renders this as: - - \quotation - \tt {QLineEdit::QLineEdit(const QString &contents, QWidget *parent) :QWidget(parent)} - \endquotation - - See also \l {c-command} {\\c}. - - \target b-command - \section1 \\b - - The \\b command renders its argument in bold font. This command used - to be called \\bold. - - \code - / *! - This is regular text; \b {this text is - rendered using the \\b command}. - * / - \endcode - - QDoc renders this as: - - \quotation - This is regular text; \b {this text is rendered using - the \\b command}. - \endquotation - - \target e-command - \section1 \\e (emphasis, italics) \span {class="newStuff"} {(new 5/3/2012)} - - The \\e command renders its argument in a special font, normally italics. This - command used to be called \\i, which is now deprecated. Use \e for italics. - - If the argument contains spaces or other punctuation, enclose the - argument in curly brackets. - - \code - / *! - Here, we render \e {a few words} in italics. - * / - \endcode - - QDoc renders this as: - - \quotation - Here, we render \e {a few words} in italics. - \endquotation - - If you want to use other QDoc commands within an argument that - contains spaces, you always need to enclose the argument in - braces. But QDoc is smart enough to count parentheses [3], so you - don't need braces in cases like this: - - \code - / *! - An argument can sometimes contain whitespaces, - for example: \e QPushButton(tr("A Brand New Button")) - * / - \endcode - - QDoc renders this as: - - \quotation - An argument can sometimes contain whitespaces, - for example: \e QPushButton(tr("A Brand New Button")) - \endquotation - - Finally, trailing punctuation is not included in an argument [4], - nor is "'s" [5] - - \raw HTML - <table align="center" cellpadding="2" - cellspacing="1" border="0"> - <tr valign="top" bgcolor="#a2c511"> - <th></th> - <th>QDoc Syntax</th> - <th>Generated Documentation</th> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td>1</td> - <td>A variation of a command button is a \e menu - button.</td> - <td>A variation of a command button is a <i>menu</i> - button.</td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td>2</td> - <td>The QPushButton widget provides a - \e {command button}.</td> - <td>The QPushButton widget provides a - <i>command button</i>.</td> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td>3</td> - <td>Another class of buttons are option buttons - \e (see QRadioButton).</td> - <td>Another class of buttons are option buttons - <i> (see QRadioButton)</i>.</td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td>4</td> - <td>A push button emits the signal \e clicked().</td> - <td>A push button emits the signal <i>clicked</i>().</td> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td>5</td> - <td>The \e QPushButton's checked property is - false by default.</td> - <td>The <i>QPushButton</i>'s checked property is - false by default.</td> - </tr> - - </table> - \endraw - - \target sub-command - \section1 \\sub - - The \\sub command renders its argument lower than the baseline of - the regular text, using a smaller font. - - \code - / *! - Definition (Range): Consider the sequence - {x\sub n}\sub {n > 1} . The set - - {x\sub 2, x\sub 3, x\sub 4, ...} = {x\sub n ; n = 2, 3, 4, ...} - - is called the range of the sequence. - * / - \endcode - - QDoc renders this as: - - \quotation - Definition (Range): Consider the sequence - {x\sub n}\sub {n > 1} . The set - - {x\sub 2, x\sub 3, x\sub 4, ...} = {x\sub n ; n = 2, 3, 4, ...} - - is called the range of the sequence. - \endquotation - - If the argument contains spaces or other punctuation, enclose the - argument in curly brackets. - - \target sup-command - \section1 \\sup - - The \\sup command renders its argument higher than - the baseline of the regular text, using a smaller font. - - \code - / *! - The series - - 1 + a + a\sup 2 + a\sup 3 + a\sup 4 + ... - - is called the \i {geometric series}. - * / - \endcode - - QDoc renders this as: - - \quotation - The series - - 1 + a + a\sup 2 + a\sup 3 + a\sup 4 + ... - - is called the \e {geometric series}. - \endquotation - - If the argument contains spaces or other punctuation, enclose the - argument in curly brackets. - - \target uicontrol-command - \section1 \\uicontrol - - The \\uicontrol command is used to mark content as being used for UI - control elements. When using HTML, the output is rendered in bold. - When using DITA XML the content is enclosed in a \c{uicontrol} tag. - - \sa \\b - - \target underline-command - \section1 \\underline - - The \\underline command renders its argument underlined. - - \code - / *! - The \underline {F}ile menu gives the users the possibility - to edit an existing file, or save a new or modified - file, and exit the application. - * / - \endcode - - QDoc renders this as: - - \quotation - The \underline {F}ile menu gives the users the possibility - to edit an existing file, or save a new or modified - file, and exit the application. - \endquotation - - If the argument contains spaces or other punctuation, enclose the - argument in curly brackets. - - \target backslash-command - \section1 \\\\ (double backslash) - - The \\\\ command expands to a double backslash. - - QDoc commands always start with a single backslash. To display a - single backslash in the text you need to type two backslashes. If - you want to display two backslashes, you need to type four. - - \code - / *! - The \\\\ command is useful if you want a - backslash to appear verbatim, for example, - writing C:\\windows\\home\\. - * / - \endcode - - QDoc renders this as: - - \quotation - The \\\\ command is useful if you want a - backslash to appear verbatim, for example, - writing C:\\windows\\home\\. - \endquotation - - However, if you want your text to appear in a monospace font as - well, you can use the \l {c-command} {\\c} command instead, which - accepts and renders the backslash as any other character. For - example: - - \code - / *! - The \\c command is useful if you want a - backslash to appear verbatim, and the word - that contains it written in a monospace font, - like this: \c {C:\windows\home\}. - * / - \endcode - - QDoc renders this as: - - \quotation - The \\c command is useful if you want a - backslash to appear verbatim, and the word - that contains it written in a monospace font, - like this: \c {C:\windows\home\}. - \endquotation - -*/ - - -/*! - \page 05-qdoc-commands-documentstructure.html - \previouspage Text Markup - \contentspage QDoc Manual - \nextpage Including Code Inline - - \title Document Structure - - The document structuring commands are for dividing your document - into sections. QDoc supports six kinds of sections: \c \part, \c - \chapter, \c \section1, \c \section2, \c \section3, and \c - \section4. The \c \section1..4 commands are the most useful. They - correspond to the traditional section, subsection, etc used in - outlining. - - \target part-command - \section1 \\part - - The \\part command is intended for use in a large document, like a - book. - - In general a document structuring command considers everything - that follows it until the first line break as its argument. The - argument is rendered as the unit's title. If the title needs to be - spanned over several lines, make sure that each line (except the - last one) is ended with a backslash. - - In total, there are six levels of sections in QDoc: \c \part, \c - \chapter, \c \section1, \c \section2, \c \section3 and \c - \section4. \c \section1 to \c \section4 correspond to the - traditional section, subsection, subsubsection and - subsubsubsection. - - There is a strict ordering of the section units: - - \code - part - | - chapter - | - section1 - | - section2 - | - section3 - | - section4 - \endcode - - For example, a \c section1 unit can only appear as the top level - section or inside a \c chapter unit. Skipping a section unit, for - example from \c part to \c section1, is not allowed. - - You can \e begin with either of the three: \c part, \c chapter or - \c section1. - - - \code - / *! - \part Basic Qt - - This is the first part. - - - \chapter Getting Started - - This is the first part's first chapter. - - - \section1 Hello Qt - - This is the first chapter's first section. - - - \section1 Making Connections - - This is the first chapter's second section. - - - \section1 Using the Reference Documentation - - This is the first chapter's third section. - - - \chapter Creating Dialogs - - This is the first part's second chapter. - - - \section1 Subclassing QDialog - - This is the second chapter's first section. - - ... - - - \part Intermediate Qt - - This is the second part. - - - \chapter Layout Management - - This is the second part's first chapter. - - - \section1 Basic Layouts - - This is the first chapter's first section. - - ... - * / - \endcode - - QDoc renders this as: - - \quotation - \raw HTML - <a name="Basic Qt"> - <h1>Basic Qt</h1> - </a> - <p>This is the first part.</p> - - <a name="Getting started"> - <h2>Getting Started</h2> - </a> - This is the first part's first chapter.</p> - - <a name="Hello Qt"> - <h3>Hello Qt</h3> - </a> - <p>This is the first chapter's first section.</p> - - <a name="Making Connections"> - <h3>Making Connections</h3> - </a> - <p>This is the first chapter's second section.</p> - - <a name="Using the Reference Documentation"> - <h3>Using the Reference Documentation</h3> - </a> - <p>This is the first chapter's third section.</p> - - <a name="Creating Dialogs"> - <h2>Creating Dialogs</h2> - </a> - <p>This is the first part's second chapter.</p> - - <a name="Subclassing QDialog"> - <h3>Subclassing QDialog</h3> - </a> - <p>This is the second chapter's first section.</p> - - ... - - <a name="Intermediate Qt"> - <h1>Intermediate Qt</h1> - </a> - <p>This is the second part.</p> - - <a name="Layout Management"> - <h2>Layout Management</h2> - </a> - <p>This is the second part's first chapter.</p> - - <a name="Basic Layouts"> - <h3>Basic Layouts</h3> - </a> - <p>This is the first chapter's first section.</p> - - ... - - \endraw - \endquotation - - Each section is a logical unit in the document. The section - heading appears in the automatically generated table of contents - that normally appears in the upper right-hand corner of the page. - - \target chapter-command - \section1 \\chapter - - The \\chapter command is intended for use in - larger documents, and divides the document into chapters. - - See \l{part} {\\part} for an explanation of the various - section units, command argument, and rendering. - - \target sectionOne-command - \section1 \\section1 - - The \\section1 command starts a new section. - - See \l{part} {\\part} for an explanation of the various - section units, command argument, and rendering. - - \target sectionTwo-command - \section1 \\section2 - - The \\section2 command starts a new section. - - See \l{part} {\\part} for an explanation of the various - section units, command argument, and rendering. - - \target sectionThree-command - \section1 \\section3 - - The \\section3 command starts a new section. - - See \l{part} {\\part} for an explanation of the various - section units, command argument, and rendering. - - \target sectionFour-command - \section1 \\section4 - - The \\section4 command starts a new section. - - See \l{part} {\\part} for an explanation of the various - section units, command argument, and rendering. - -*/ - - -/*! - \page 06-qdoc-commands-includecodeinline.html - \previouspage Document Structure - \contentspage QDoc Manual - \nextpage Including External Code - - \title Including Code Inline - - The following commands are used to render source code without - formatting. The source code begins on a new line, rendered in the - code. - - \b{Note:} Although all these commands are for rendering C++ - code, the - \l{07-0-qdoc-commands-includingexternalcode.html#snippet-command} - {\\snippet} and - \l{07-0-qdoc-commands-includingexternalcode.html#codeline-command} - {\\codeline} commands are preferred over the others. These - commands allow equivalent code snippets for other Qt language - bindings to be substituted for the C++ snippets in the - documentation. - - \target code-command - \section1 \\code - - The \\code and \\endcode commands enclose a snippet of source code. - - \note The \l {c-command} {\\c} command can be used for short code - fragments within a sentence. The \\code command is for longer code - snippets. It renders the code verbatim in a separate paragraph in - the code font. - - When processing any of the \\code, \l {newcode-command} {\\newcode} or \l - {oldcode-command} {\\oldcode} commands, QDoc removes all - indentation that is common for the verbatim code blocks within a - \c{/}\c{*!} ... \c{*}\c{/} comment before it adds the standard - indentation. For that reason the recommended style is to use 8 - spaces for the verbatim code contained within these commands - - \note This doesn't apply to externally quoted code using the \l - {quotefromfile-command} {\\quotefromfile} or \l - {quotefile-command} {\\quotefile} command. - - \code - / *! - \code - #include <QApplication> - #include <QPushButton> - - int main(int argc, char *argv[]) - { - ... - } - \ endcode - * / - \endcode - - QDoc renders this as: - - \code - #include <QApplication> - #include <QPushButton> - - int main(int argc, char *argv[]) - { - ... - } - \endcode - - Other QDoc commands are disabled within \\code... \\endcode, and - the special character '\\' is accepted and rendered like the rest - of the code. - - To include code snippets from an external file, use the - \l{07-0-qdoc-commands-includingexternalcode.html#snippet-command} - {\\snippet} and - \l{07-0-qdoc-commands-includingexternalcode.html#codeline-command} - {\\codeline} commands. - - See also \l {c-command} {\\c}, \l - {07-0-qdoc-commands-includingexternalcode.html#quotefromfile-command} - {\\quotefromfile}, \l{newcode-command} {\\newcode}, and \l {oldcode-command} - {\\oldcode}. - - \target newcode-command - \section1 \\newcode - - The \\newcode, \\oldcode, and \\endcode commands enable you to - show how to port a snippet of code to a new version of an API. - - The \\newcode command and its companion the \\oldcode command are - a convenience combination of the \l {code-command} {\\code} commands: - this combination provides a text relating the two code snippets to each - other. - - The \\newcode command requires a preceding \\oldcode statement. - - Like the \l{code-command}{\\code} command, the \\newcode command renders its - code on a new line in the documentation using a monospace font and the - standard indentation. - - \code - / *! - \oldcode - if (printer->setup(parent)) - ... - \newcode - QPrintDialog dialog(printer, parent); - if (dialog.exec()) - ... - \ endcode - * / - \endcode - - QDoc renders this as: - - \quotation - \oldcode - if (printer->setup(parent)) - ... - \newcode - QPrintDialog dialog(printer, parent); - if (dialog.exec()) - ... - \endcode - \endquotation - - Other QDoc commands are disabled within \\oldcode ... \\endcode, - and the '\\' character doesn't need to be escaped. - - \target oldcode-command - \section1 \\oldcode - - The \\oldcode command requires a corresponding - \\newcode statement; otherwise QDoc fails to parse the command - and emits a warning. - - See also \l {newcode-command} {\\newcode}. - - \target qml-command - \section1 \\qml - - The \\qml and \\endqml commands enclose a snippet of QML source - code. Currently, QDoc handles \\qml and \\endqml in exactly the same - way as \\code and \\endcode. - - \code - / *! - \qml - import QtQuick 1.0 - - Row { - Rectangle { - width: 100; height: 100 - color: "blue" - transform: Translate { y: 20 } - } - Rectangle { - width: 100; height: 100 - color: "red" - transform: Translate { y: -20 } - } - } - \endqml - * / - \endcode - - QDoc renders this as: - - \qml - import QtQuick 1.0 - - Row { - Rectangle { - width: 100; height: 100 - color: "blue" - transform: Translate { y: 20 } - } - Rectangle { - width: 100; height: 100 - color: "red" - transform: Translate { y: -20 } - } - } - \endqml -*/ - - -/*! - \page 07-0-qdoc-commands-includingexternalcode.html - \previouspage Including Code Inline - \contentspage QDoc Manual - \nextpage Creating Links - - \title Including External Code - - The following commands enable you to include code snippets from - external files. You can make QDoc include the complete contents of - a file, or you can quote specific parts of the file and skip - others. The typical use of the latter is to quote a file chunk by - chunk. - - \b{Note:} Although all these commands are for rendering C++ - code, the - \l{07-0-qdoc-commands-includingexternalcode.html#snippet-command} - {\\snippet} and - \l{07-0-qdoc-commands-includingexternalcode.html#codeline-command} - {\\codeline} commands are preferred over the others. These - commands allow equivalent code snippets for other Qt language - bindings to be substituted for the C++ snippets in the - documentation. - - \target quotefile-command - \section1 \\quotefile - - The \\quotefile command expands to the complete contents of the - file given as argument. - - The command considers the rest of the line as part of its - argument, make sure to follow the file name with a line break. - - The file's contents is rendered in a separate paragraph, using a - monospace font and the standard indentation. The code is shown - verbatim. - - \code - / *! - This is a simple "Hello world" example: - - \quotefile examples/main.cpp - - It contains only the bare minimum you need - to get a Qt application up and running. - * / - \endcode - - QDoc renders this as: - - \quotation - This is a simple "Hello world" example: - - \quotefile examples/main.cpp - - It contains only the bare minimum you need to get a Qt - application up and running. - \endquotation - - See also \l {quotefromfile-command} {\\quotefromfile} and - \l {code-command} {\\code}. - - - \target quotefromfile-command - \section1 \\quotefromfile - - The \\quotefromfile command opens the file given as argument for - quoting. - - The command considers the rest of the line as part of its - argument, make sure to follow the file name with a line break. - - The command is intended for use when quoting parts from file with - the walkthrough commands: \l {printline-command} {\\printline}, \l - {printto-command} {\\printto}, \l {printuntil-command} - {\\printuntil}, \l {skipline-command} {\\skipline}, \l - {skipto-command} {\\skipto}, \l {skipuntil-command} - {\\skipuntil}. This enables you to quote specific portions of a - file. - - \code - / *! - The whole application is contained within - the \c main() function: - - \quotefromfile examples/main.cpp - - \skipto main - \printuntil app(argc, argv) - - First we create a QApplication object using - the \c argc and \c argv parameters. - - \skipto QPushButton - \printuntil resize - - Then we create a QPushButton, and give it a reasonable - size using the QWidget::resize() function. - - ... - * / - \endcode - - QDoc renders this as: - - \quotation - The whole application is contained within - the \c main() function: - - \quotefromfile examples/main.cpp - - \skipto main - \printuntil app(argc, argv) - - First we create a QApplication object using the \c argc - and \c argv parameters. - - \skipto QPushButton - \printuntil resize - - Then we create a QPushButton, and give it a reasonable - size using the QWidget::resize() function. - - ... - \endquotation - - QDoc remembers which file it is quoting from, and the current - position in that file (see \l {file} {\\printline} for more - information). There is no need to "close" the file. - - See also \l {quotefile-command} {\\quotefile}, \l {code-command} - {\\code} and \l {dots} {\\dots}. - - \target printline-command - \section1 \\printline - - The \\printline command expands to the line from the current - position to the next non-blank line of the current source file. - - To ensure that the documentation remains synchronized with the - source file, a substring of the line must be specified as an - argument to the command. Note that the command considers the rest - of the line as part of its argument, make sure to follow the - substring with a line break. - - The line from the source file is rendered as a separate paragraph, - using a monospace font and the standard indentation. The code is - shown verbatim. - - \code - / *! - There has to be exactly one QApplication object - in every GUI application that uses Qt. - - \quotefromfile examples/main.cpp - - \printline QApplication - - This line includes the QApplication class - definition. QApplication manages various - application-wide resources, such as the - default font and cursor. - - \printline QPushButton - - This line includes the QPushButton class - definition. The QPushButton widget provides a command - button. - - \printline main - - The main function... - * / - \endcode - - QDoc renders this as: - - \quotation - There has to be exactly one QApplication object - in every GUI application that uses Qt. - - \quotefromfile examples/main.cpp - - \skipto QApplication - \printline QApplication - - This line includes the QApplication class - definition. QApplication manages various - application-wide resources, such as the - default font and cursor. - - \printline QPushButton - - This line includes the QPushButton class - definition. The QPushButton widget provides a command - button. - - \printline main - - The main function... - \endquotation - - \target file - - QDoc reads the file sequentially. To move the current position - forward you can use either of the \l {skipline-command} - {\\skip...} commands. To move the current position backward, you - can use the \l {quotefromfile-command} {\\quotefromfile} command - again. - - \target substring - - If the substring argument is surrounded by slashes it is - interpreted as a \l {QRegExp}{regular expression}. - - \code - / *! - \quotefromfile examples/mainwindow.cpp - - \skipto closeEvent - \printuntil /^\}/ - - Close events are sent to widgets that the users want to - close, usually by clicking \c File|Exit or by clicking - the \c X title bar button. By reimplementing the event - handler, we can intercept attempts to close the - application. - * / - \endcode - - QDoc renders this as: - - \quotation - \quotefromfile examples/mainwindow.cpp - - \skipto closeEvent - \printuntil /^\}/ - - Close events are sent to widgets that the users want to - close, usually by clicking \c File|Exit or by clicking - the \c X title bar button. By reimplementing the event - handler, we can intercept attempts to close the - application. - \endquotation - - (\l {widgets/scribble} {The complete example file...}) - - The regular expression \c /^\}/ makes QDoc print until the first - '}' character occurring at the beginning of the line without - indentation. /.../ encloses the regular expression, and '^' means - the beginning of the line. The '}' character must be escaped since - it is a special character in regular expressions. - - QDoc will emit a warning if the specified substring or regular - expression cannot be located, i.e. if the source code has changed. - - See also \l {printto-command} {\\printto} and \l - {printuntil-command} {\\printuntil}. - - \target printto-command - \section1 \\printto - - The \\printto command expands to all the lines from the current - position up to and \e excluding the next line containing a given - substring. - - The command considers the rest of the line as part of its - argument, make sure to follow the substring with a line break. The - command also follows the same conventions for \l {file} - {positioning} and \l {substring} {argument} as the \l - {printline-command} {\\printline} command. - - The lines from the source file are rendered in a separate - paragraph, using a monospace font and the standard - indentation. The code is shown verbatim. - - \code - / *! - The whole application is contained within the - \c main() function: - - \quotefromfile examples/main.cpp - \printto hello - - First we create a QApplication object using the \c argc and - \c argv parameters... - * / - \endcode - - QDoc renders this as: - - \quotation - The whole application is contained within the - \c main() function: - - \quotefromfile examples/main.cpp - \skipto main - \printto hello - - First we create a QApplication object using the \c argc - and \c argv parameters... - \endquotation - - See also \l {printline-command} {\\printline} and \l - {printuntil-command} {\\printuntil}. - - \target printuntil-command - \section1 \\printuntil - - The \\printuntil command expands to all the lines from the current - position up to and \e including the next line containing a given - substring. - - The command considers the rest of the line as part of its - argument, make sure to follow the substring with a line break. The - command also follows the same conventions for \l {file} - {positioning} and \l {substring} {argument} as the \l - {printline-command} {\\printline} command. - - The lines from the source file are rendered in a separate - paragraph, using a monospace font and the standard - indentation. The code is shown verbatim. - - \code - / *! - The whole application is contained within the - \c main() function: - - \quotefromfile examples/main.cpp - \skipto main - \printuntil hello - - First we create a QApplication object using the - \c argc and \c argv parameters, then we create - a QPushButton. - * / - \endcode - - QDoc renders this as: - - \quotation - The whole application is contained within the - \c main() function: - - \quotefromfile examples/main.cpp - \skipto main - \printuntil hello - - First we create a \l - {http://doc.qt.io/qt-5/qapplication.html} {QApplication} - object using the \c argc and \c argv parameters, then we - create a \l - {http://doc.qt.io/qt-5/qpushbutton.html} {QPushButton}. - \endquotation - - See also \l {printline-command} {\\printline} and \l - {printto-command} {\\printto}. - - \target skipline-command - \section1 \\skipline - - The \\skipline command ignores the next non-blank line in the - current source file. - - Doc reads the file sequentially, and the \\skipline command is - used to move the current position (omitting a line of the source - file). See the remark about \l {file} {file positioning} above. - - The command considers the rest of the line as part of its - argument, make sure to follow the substring with a line break. The - command also follows the same conventions for \l {substring} - {argument} as the \l {printline-command} {\\printline} command, - and it is used in conjunction with the \l {quotefromfile-command} - {\\quotefromfile} command. - - \code - / *! - QPushButton is a GUI push button that the user - can press and release. - - \quotefromfile examples/main.cpp - \skipline QApplication - \printline QPushButton - - This line includes the QPushButton class - definition. For each class that is part of the - public Qt API, there exists a header file of - the same name that contains its definition. - * / - \endcode - - QDoc renders this as: - - \quotation - \l - QPushButton is a GUI push button that the user - can press and release. - - \quotefromfile examples/main.cpp - \skipto QApplication - \skipline QApplication - \printline QPushButton - - This line includes the QPushButton class - definition. For each class that is part of the public - Qt API, there exists a header file of the same name - that contains its definition. - \endquotation - - See also \l {skipto-command} {\\skipto}, \l {skipuntil-command} - {\\skipuntil} and \l {dots} {\\dots}. - - \target skipto-command - \section1 \\skipto - - The \\skipto command ignores all the lines from the current - position up to and \e excluding the next line containing a given - substring. - - QDoc reads the file sequentially, and the \\skipto command is used - to move the current position (omitting one or several lines of the - source file). See the remark about \l {file} {file positioning} - above. - - The command considers the rest of the line as part of its - argument, make sure to follow the substring with a line break. - - The command also follows the same conventions for \l {substring} - {argument} as the \l {printline-command} {\\printline} command, - and it is used in conjunction with the \l {quotefromfile-command} - {\\quotefromfile} command. - - \code - / *! - The whole application is contained within - the \c main() function: - - \quotefromfile examples/main.cpp - \skipto main - \printuntil } - - First we create a QApplication object. There - has to be exactly one such object in - every GUI application that uses Qt. Then - we create a QPushButton, resize it to a reasonable - size... - * / - \endcode - - QDoc renders this as: - - \quotation - The whole application is contained within - the \c main() function: - - \quotefromfile examples/main.cpp - \skipto main - \printuntil } - - First we create a QApplication object. There has to be - exactly one such object in every GUI application that - uses Qt. Then we create a QPushButton, resize it to a - reasonable size ... - \endquotation - - See also \l {skipline-command} {\\skipline}, \l - {skipuntil-command} {\\skipuntil} and \l {dots} {\\dots}. - - \target skipuntil-command - \section1 \\skipuntil - - The \\skipuntil command ignores all the lines from the current - position up to and \e including the next line containing a given - substring. - - QDoc reads the file sequentially, and the \\skipuntil command is - used to move the current position (omitting one or several lines - of the source file). See the remark about \l {file} {file - positioning} above. - - The command considers the rest of the line as part of its - argument, make sure to follow the substring with a line break. - - The command also follows the same conventions for \l {substring} - {argument} as the \l {printline-command} {\\printline} command, - and it is used in conjunction with the \l {quotefromfile-command} - {\\quotefromfile} command. - - \code - / *! - The first thing we did in the \c main() function - was to create a QApplication object \c app. - - \quotefromfile examples/main.cpp - \skipuntil show - \dots - \printuntil } - - In the end we must remember to make \c main() pass the - control to Qt. QCoreApplication::exec() will return when - the application exits... - * / - \endcode - - QDoc renders this as: - - \quotation - The first thing we did in the \c main() function was to - create a QApplication object \c app. - - \quotefromfile examples/main.cpp - \skipuntil show - \dots - \printuntil } - - In the end we must remember to make \c main() pass the - control to Qt. QCoreApplication::exec() - will return when the application exits... - \endquotation - - See also \l {skipline-command} {\\skipline}, \l {skipto-command} - {\\skipto} and \l {dots} {\\dots}. - - \target dots-command - \section1 \\dots - - The \\dots command indicates that parts of the source file have - been omitted when quoting a file. - - The command is used in conjunction with the \l - {quotefromfile-command} {\\quotefromfile} command, and should be - stated on its own line. The dots are rendered on a new line, using - a monospace font. - - \code - / *! - \quotefromfile examples/main.cpp - \skipto main - \printuntil { - \dots - \skipuntil exec - \printline } - * / - \endcode - - QDoc renders this as: - - \quotefromfile examples/main.cpp - \skipto main - \printuntil { - \dots - \skipuntil exec - \printline } - - The default indentation is 4 spaces, but this can be adjusted - using the command's optional argument. - - \code - / *! - \dots 0 - \dots - \dots 8 - \dots 12 - \dots 16 - * / - \endcode - - QDoc renders this as: - - \dots 0 - \dots - \dots 8 - \dots 12 - \dots 16 - - See also \l {skipline-command} {\\skipline}, \l {skipto-command} - {\\skipto} and \l {skipuntil-command} {\\skipuntil}. - - \target snippet-command - \section1 \\snippet - - The \\snippet command causes a code snippet to be included - verbatim as preformatted text, which may be syntax highlighted. - - Each code snippet is referenced by the file that holds it and by - a unique identifier for that file. Snippet files are typically - stored in a \c{snippets} directory inside the documentation - directory (for example, \c{$QTDIR/doc/src/snippets}). - - For example, the following documentation references a snippet in a - file residing in a subdirectory of the documentation directory: - - \code - \snippet snippets/textdocument-resources/main.cpp Adding a resource - \endcode - - The text following the file name is the unique identifier for the - snippet. This is used to delimit the quoted code in the relevant - snippet file, as shown in the following example that corresponds to - the above \c{\\snippet} command: - - \dots - \code - QImage image(64, 64, QImage::Format_RGB32); - image.fill(qRgb(255, 160, 128)); - - //! [Adding a resource] - document->addResource(QTextDocument::ImageResource, - QUrl("mydata://image.png"), QVariant(image)); - //! [Adding a resource] - \endcode - \dots - - \target codeline-command - \section1 \\codeline - - The \\codeline command inserts a blank line of preformatted - text. It is used to insert gaps between snippets without closing - the current preformatted text area and opening a new one. - -*/ - - -/*! - \page 08-qdoc-commands-creatinglinks.html - \previouspage Including External Code - \contentspage QDoc Manual - \nextpage Including Images - - \title Creating Links - - These commands are for creating hyperlinks to classes, functions, - examples, and other targets. - - \target l-command - \section1 \\l (link) - - The \\l link command is used to create a hyperlink to many - different kinds of targets. The command's general syntax is: - - \code - \l [ link criteria ] { link target } { link text } - \endcode - - ...where the \c {link criteria} in square brackets are optional - but may be required when the \c {link target} is ambiguous. See - \l {Fixing Ambiguous Links} below. - - Here is an example using the \\l command to link to an external page: - - \code - / *! - Read the \l {http://doc.qt.io/qt-5/} - {Qt 5.0 Documentation} carefully. - * / - \endcode - - QDoc renders this as: - - \quotation - Read the \l {http://doc.qt.io/qt-5/} - {Qt 5.0 Documentation} carefully. - \endquotation - - If the link target is equivalent to the link text, the second - argument can be omitted. - - For example, if you have documentation like: - - \code - / *! - \target assertions - - Assertions make some statement about the text at the - point where they occur in the regexp, but they do not - match any characters. - - ... - - Regexps are built up from expressions, quantifiers, and - \l {assertions} {assertions}. - * / - \endcode - - You can simplify this as follows: - - \code - / *! - \target assertions - - Assertions make some statement about the text at the - point where they occur in the regexp, but they do not - match any characters. - - ... - - Regexps are built up from expressions, quantifiers, and - \l assertions. - * / - \endcode - - For the one-parameter version, the braces can often be omitted. - The \\l command supports several ways of linking: - - \list - - \li \c {\l QWidget} - The name of a class documented with the \l - {class-command} {\\class} command. - - \li \c {\l QWidget::sizeHint()} - The name of a member function, - documented with or without an \l {fn-command} {\\fn} command. - - \li \c {\l <QtGlobal>} - The subject of a \l {headerfile-command} - {\\headerfile} command. - - \li \c {\l widgets/wiggly} - The relative path used in an \l - {example-command} {\\example} command. - - \li \c {\l {QWidget Class Reference}} - The title used in a - \l {title-command} {\\title} command. - - \li \c {\l {Introduction to QDoc}}- The text from one of the - \l{part-command} {\\part}, \l{chapter} {\\chapter}, or \l - {sectionOne-command} {\\section} commands. - - \li \c {\l fontmatching} - The argument of a \l {target-command} - {\\target} command. - - \li \c {\l {Shared Classes}} - A keyword named in a \l - {keyword-command} {\\keyword} command. - - \li \c {\l http://qt-project.org/} - A URL. - - \endlist - - QDoc also tries to make a link out of any word that doesn't - resemble a normal English word, for example, Qt class names or - functions, like QWidget or QWidget::sizeHint(). In these cases, - the \\l command can actually be omitted, but by using the command, - you ensure that QDoc will emit a warning if it cannot find the - link target. In addition, if you only want the function name to - appear in the link, you can use the following syntax: - - \list - \li \c {\l {QWidget::} {sizeHint()}} - \endlist - - QDoc renders this as: - - \quotation - \l {QWidget::} {sizeHint()} - \endquotation - - \section2 Fixing Ambiguous Links - - Because of the modularization of Qt beginning with Qt 5.0, The - possibility that qdoc will have to deal with ambiguous links has - increased. An ambiguous link is one that has a matching target in - more than one Qt module, e.g. the same section title can appear in - more than one Qt module, or the name of a C++ class in one module - can also be the name of a QML type in another module. A real - example in Qt5 is the name Qt itself. Qt is the name of both a C++ - namespace in QtCore and a QML type in QtQml. - - Suppose we want to link to the \l {Qt} {Qt C++ namespace}. At the - time qdoc generated this HTML page, that link was correct. Does - it still go to the C++ namespace? Qdoc generated that link from - this link command: - - \list - \li \c {\l {Qt} {Qt C++ namespace}} - \endlist - - Now suppose we want to link to the \l [QML] {Qt} {Qt QML type}. - At the time qdoc generated this HTML page, that link was also - correct, but we had to use this link command: - - \list - \li \c {\l [QML] {Qt} {Qt QML type}} - \endlist - - The \e {QML} in \e {square brackets} tells qdoc to accept a - matching target only if the traget is on a QML page. Qdoc actually - finds the C++ namespace target first, but since that target is on - a C++ page, qdoc ignores it and keeps looking until it finds the - same target on a QML page. - - Without the guidance in the \e{\\l command} in the optional \e - {square bracket} argument, qdoc links to the first matching target - it finds. qdoc can't warn that the link was ambiguous in such - cases because it doesn't know that another matching target exists. - - \section2 What arguments can appear in square brackets? - - A link command with square bracket argument has the following syntax: - \list - \c {\l [QML|CPP|DOC|QtModuleName] {link target} {link text}} - \endlist - - The \e {square bracket} argument is only allowed in the \c {\\l - (link)} command. The example above shows how \c QML is used as the - \e {square brackets} argument to force qdoc to match a QML target. - Most often, this will be a QML type, but it can also be a QML - member function of property. - - In the example, qdoc didn't need a \e {square bracket} argument to - find the Qt C++ namespace page, because that one was the first - matching target qdoc found anyway. However, to force qdoc to find - a C++ target when a matching QML target gets in the way, \c CPP - can be used as the \e {square bracket} argument. For example: - - \list - \li \c {\l [CPP] {Qt} {Qt C++ namespace}} - \endlist - - ...will force qdoc to ignore the Qt QML type and continue - searching until it matches the Qt C++ namespace. - - If the link target is neither a C++ nor a QML entity, \c {DOC} can - be used as the \e {square bracket} argument to prevent qdoc from - matching either of those. At this writing, there were no cases of - ambiguous links where using \c {DOC} was required. - - Often, the documentor knows which Qt module the link target is - in. When the module name is known, use the module name as the \e - {square bracket} argument. In the example above, if we know that - the QML type named Qt is located in the QtQml module, we can write - the link command like this: - - \list - \li \c {\l [QtQml] {Qt} {Qt QML type}} - \endlist - - When a module name is used as the \e {square bracket} argument, - qdoc will search for link the target in that module only. This - makes searching for link targets more efficient. - - Finally, the module name and entity type arguments can be - combined, separated by a blank, so something like this is also - allowed: - - \list - \li \c {\l [CPP QtQml] {Window} {C++ class Window}} - \endlist - - As of this writing, there were no cases where combining the two - was required. - - See also \l {sa-command} {\\sa}, \l {target-command} {\\target}, - and \l {keyword-command} {\\keyword}. - - - \target sa-command - \section1 \\sa (see also) - - The \\sa command defines a list of links that will be rendered in - a separate "See also" section at the bottom of the documentation - unit. - - The command takes a comma-separated list of links as its - argument. If the line ends with a comma, you can continue - the list on the next line. The general syntax is: - - \code - \sa {the first link}, {the second link}, - {the third link}, ... - \endcode - - QDoc will automatically try to generate "See also" links - interconnecting a property's various functions. For example, a - setVisible() function will automatically get a link to visible() - and vice versa. - - In general, QDoc will generate "See also" links that interconnect - the functions that access the same property. It recognizes four - different syntax versions: - - \list - \li \c property() - \li \c setProperty() - \li \c isProperty() - \li \c hasProperty() - \endlist - - The \\sa command supports the same kind of links as the \l - {l-command} {\\l} command. - - \code - / *! - Appends the actions \a actions to this widget's - list of actions. - - \sa removeAction(), QMenu, addAction() - * / - void QWidget::addActions(QList<QAction *> actions) - { - ... - } - \endcode - - QDoc renders this as: - - \quotation - \b {void QWidget::addActions ( QList<QAction*> - \e actions )} - - Appends the actions \e actions to this widget's list of - actions. - - See also \l {QWidget::removeAction()} {removeAction()}, - \l QMenu, and \l {QWidget::addAction()} {addAction()}. - \endquotation - - See also \l {l-command} {\\l}, \l {target-command} {\\target} and - \l {keyword-command} {\\keyword}. - - - \target target-command - \section1 \\target - - The \\target command names a place in the documentation that you - can link to using the \l {l-command} {\\l (link)} and \l - {sa-command} {\\sa (see also)} commands. - - The text up to the line break becomes the target name. Be sure to - follow the target name with a line break. Curly brackets are not - required around the target name, but they may be required when the - target name is used in a link command. See below. - - \code - / *! - \target capturing parentheses - \section1 Capturing Text - - Parentheses allow us to group elements together so that - we can quantify and capture them. - - ... - * / - \endcode - - The target name \e{capturing parentheses} can be linked from - within the same document containing the target in the following way: - - \list - \li \c {\l {capturing parentheses}} (from within the same QDoc comment) - \endlist - - \note The brackets in the link example are required because the - target name contains spaces. - - See also \l {l-command} {\\l}, \l {sa-command} {\\sa} and \l - {keyword-command} {\\keyword}. - - \target keyword-command - \section1 \\keyword - - The \\keyword command names a place in the documentation that you - can link to using the \l {l-command} {\\l (link)} and \l - {sa-command} {\\sa (see also)} commands. - - The \\keyword command is like the \l {target-command} {\\target} - command, but stronger. A keyword can be linked from anywhere using - a simple syntax. - - Keywords must be unique over all the documents processed during - the QDoc run. The command uses the rest of the line as its - argument. Be sure to follow the keyword with a line break. - - - \code - / *! - \class QRegExp - \reentrant - \brief The QRegExp class provides pattern - matching using regular expressions. - \ingroup tools - \ingroup misc - \ingroup shared - - \keyword regular expression - - Regular expressions, or "regexps", provide a way to - find patterns within text. - - ... - * / - \endcode - - The location marked with the keyword can be linked to with: - - \code - / *! - When a string is surrounded by slashes, it is - interpreted as a \l {QRegExp}{regular expression}. - * / - \endcode - - QDoc renders this as: - - \quotation - When a string is surrounded by slashes, it is - interpreted as a \l {regular expression}. - \endquotation - - If the keyword text contains spaces, the brackets are required. - - See also \l {l-command} {\\l (link)}, \l {sa-command} {\\sa (see - also)} and \l {target-command} {\\target}. - -*/ - - -/*! - \page 09-qdoc-commands-includingimages.html - \previouspage Creating Links - \contentspage QDoc Manual - \nextpage Tables and Lists - - \title Including Images - - The graphic commands makes it possible to include images in the - documentation. The images can be rendered as separate paragraphs, - or within running text. - - \target image-command - \section1 \\image - - The \\image command expands to the image specified by its first - argument, and renders it centered as a separate paragraph. - - The command takes two arguments. The first argument is the name of - the image file. The second argument is optional and is a simple - description of the image, equivalent to the HTML alt="" in an image - tag. The description is used for tooltips and for browsers that don't - support images, like the Lynx text browser. - - The remaining text \e{after} the file name is the optional, - description argument. Be sure to follow the file name or the - description with a line break. Curly brackets are required if the - description argument spans multiple lines. - - \code - / *! - Qt is a C++ toolkit for cross-platform GUI application development. - - \image happyguy.jpg "Happy guy" - - Qt provides single-source portability across Microsoft - Windows, OS X, Linux, and all major commercial Unix - variants. It is also available for embedded devices. - * / - \endcode - - QDoc renders this as: - - \quotation - Qt is a C++ toolkit for cross-platform GUI application development. - - \image happyguy.jpg image "Happy guy" - - Qt provides single-source portability across Microsoft - Windows, OS X, Linux, and all major commercial Unix - variants. It is also available for embedded devices. - \endquotation - - See also \l {inlineimage-command} {\\inlineimage} and \l - {caption-command} {\\caption}. - - \target inlineimage-command - \section1 \\inlineimage - - The \\inlineimage command expands to the image specified by its - argument. The image is rendered inline with the rest of the text. - - The command takes two arguments. The first argument is the name of - the image file. The second argument is optional and is a simple - description of the image, equivalent to the HTML alt="" in an image - tag. The description is used for tooltips, and for when a browser - doesn't support images, like the Lynx text browser. - - The most common use of the \\inlineimage command is in lists and - tables. Here is an example of including inline images in a list: - - \code - / *! - \list 1 - \li \inlineimage happy.gif Oh so happy! - \li \inlineimage happy.gif Oh so happy! - \li \inlineimage happy.gif Oh so happy! - \endlist - * / - \endcode - - QDoc renders this as: - - \list 1 - \li \inlineimage happy.gif Oh so happy! - \li \inlineimage happy.gif Oh so happy! - \li \inlineimage happy.gif Oh so happy! - \endlist - - Here is an example of including inline images in a table: - - \code - / *! - \table - \header - \li Qt - \li Qt Creator - \row - \li \inlineimage happy.gif Oh so happy! - \li \inlineimage happy.gif Oh so happy! - \row - \li \inlineimage happy.gif Oh so happy! - \li \inlineimage happy.gif Oh so happy! - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" - cellspacing="1" border="0"> - <tr valign="top" bgcolor="#a2c511"> - <th>Qt</th> - <th>Qt Creator</th> - </tr> - <tr valign="top" bgcolor="#f0f0f0"> - <td><img src="images/happy.gif" alt="Oh so happy!" /> - </td> - <td><img src="images/happy.gif" alt="Oh so happy!" /> - </td> - </tr> - <tr valign="top" bgcolor="#f0f0f0"> - <td><img src="images/happy.gif" alt="Oh so happy!"/> - </td> - <td><img src="images/happy.gif" alt="Oh so happy!" /> - </td> - </tr> - </table> - \endraw - - The command can also be used to insert an image inline with the - text. - - \code - / *! - \inlineimage training.jpg Qt Training - The Qt Programming course is offered as a - five day Open Enrollment Course. The classes - are open to the public. Although the course is open - to anyone who wants to learn, attendees should - have significant experience in C++ development - to derive maximum benefit from the course. - * / - \endcode - - QDoc renders this as: - - \quotation - \inlineimage training.jpg Qt Training - The Qt Programming course is offered as a - five day Open Enrollment Course. The classes - are open to the public. Although the course is open - to anyone who wants to learn, attendees should - have significant experience in C++ development - to derive maximum benefit from the course. - \endquotation - - See also \l {image-command} {\\image} and \l {caption-command} {\\caption}. - - \target caption-command - \section1 \\caption - - The \\caption command provides a caption for an image. - - The command takes all the text up to the end of the paragraph to - be the caption. Experiment until you get the effect you want. - - \code - / *! - \table 100% - \row - \li \image windowsvista-pushbutton.png - \caption The QPushButton widget provides a command button. - \li \image windowsvista-toolbutton.png - \caption The QToolButton class provides a quick-access button to commands - or options, usually used inside a QToolBar. - \endtable - * / - \endcode - - QDoc renders this as: - - \table 100% - \row - \li \image windowsvista-pushbutton.png - \caption The QPushButton widget provides a command button. - \li \image windowsvista-toolbutton.png - \caption The QToolButton class provides a quick-access button to commands - or options, usually used inside a QToolBar. - \endtable - - See also \l {image-command} {\\image} and \l {inlineimage-command} - {\\inlineimage} -*/ - - -/*! - \page 10-qdoc-commands-tablesandlists.html - \previouspage Including Images - \contentspage QDoc Manual - \nextpage Special Content - - \title Tables and Lists - - These commands enable creating lists and tables. A list is - rendered left aligned as a separate paragraph. A table is rendered - centered as a separate paragraph. The table width depends on the - width of its contents. - - \target table-command - \section1 \\table - - The \\table and \\endtable commands delimit the contents of a - table. - - The command accepts a single argument specifying the table's width - as a percentage of the page width: - - \code - / *! - \table 100 % - - ... - - \endtable - * / - \endcode - - The code above ensures that the table will fill all available - space. If the table's width is smaller than 100 %, the table will - be centered in the generated documentation. - - A table can contain headers, rows and columns. A row starts with a - \l {row-command} {\\row} command and consists of cells, each of which - starts with an \l {li-command} {\\li} command. There is also a \l - {header-command} {\\header} command which is a special kind of row - that has a special format. - - \code - / *! - \table - \header - \li Qt Core Feature - \li Brief Description - \row - \li \l {Signal and Slots} - \li Signals and slots are used for communication - between objects. - \row - \li \l {Layout Management} - \li The Qt layout system provides a simple - and powerful way of specifying the layout - of child widgets. - \row - \li \l {Drag and Drop} - \li Drag and drop provides a simple visual - mechanism which users can use to transfer - information between and within applications. - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" - cellspacing="1" border="0"> - <tr valign="top" bgcolor="#a2c511"> - <th>Qt Core Feature</th> - <th>Brief Description</th> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td> - <a href="http://doc.qt.io/qt-5/signalsandslots.html"> - Signals and Slots</a> - </td> - <td>Signals and slots are used for communication - between objects.</td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td> - <a href="http://doc.qt.io/qt-5/layout.html"> - Layout Management</a></td> - <td>The Qt layout system provides a simple - and powerful way of specifying the layout - of child widgets.</td> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td> - <a href="http://doc.qt.io/qt-5/dnd.html"> - Drag and Drop</a></td> - <td>Drag and drop provides a simple visual - mechanism which users can use to transfer - information between and within applications.</td> - </tr> - - </table> - \endraw - - You can also make cells span several rows and columns. For - example: - - \code - / *! - \table - \header - \li {3,1} This header cell spans three columns, - but only one row. - \row - \li {2, 1} This table cell spans two columns, - but only one row - \li {1, 2} This table cell spans only one column, - but two rows. - \row - \li A regular table cell - \li A regular table cell - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" cellspacing="1" - border="0"> - - <tr valign="top" bgcolor="#a2c511"> - <th colspan="3" rowspan=" 1"> - This header cell spans three columns, but only one row. - </th> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td colspan="2" rowspan=" 1"> - This table cell spans two columns, but only one row. - </td> - <td rowspan=" 2"> - This table cell spans only one column, but two rows. - </td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td>A regular table cell</td> - <td>A regular table cell</td> - </tr> - - </table> - \endraw - - See also \l {header-command} {\\header}, \l {row-command} {\\row} and \l {li-command} {\\li}. - - \target header-command - \section1 \\header - - The \\header command indicates that the following table cells are - the current table's column headers. - - The command can only be used within the \l{table-command} - {\\table...\\endtable} commands. A header can contain several - cells. A cell is created with the \l {li-command} {\\li} command. - - A header cell's text is centered within the table cell and - rendered using a bold font. - - \code - / *! - \table - \header - \li Qt Core Feature - \li Brief Description - \row - \li \l {Signal and Slots} - \li Signals and slots are used for communication - between objects. - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" - cellspacing="1" border="0"> - <tr valign="top" bgcolor="#a2c511"> - <th>Qt Core Feature</th> - <th>Brief Description</th> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td> - <a href="http://doc.qt.io/qt-5/signalsandslots.html"> - Signals and Slots</a> - </td> - <td>Signals and slots are used for communication - between objects.</td> - </tr> - </table> - \endraw - - See also \l {table-command} {\\table}, \l {row-command} {\\row} and \l {li-command} {\\li}. - - \target row-command - \section1 \\row - - The \\row command begins a new row in a table. The \l {li-command} - {\\li items} that belong in the new row will immediately follow the - \\row. - - The command can only be used within the \l{table-command} - {\\table...\\endtable} commands. A row can contain several - cells. A cell is created with the \l {li-command} {\\li} command. - - The background cell color of each row alternates between two - shades of grey, making it easier to distinguish the rows from each - other. The cells' contents is left aligned. - - \code - / *! - \table - \header - \li Qt Core Feature - \li Brief Description - \row - \li \l {Signal and Slots} - \li Signals and slots are used for communication - between objects. - \row - \li \l {Layout Management} - \li The Qt layout system provides a simple - and powerful way of specifying the layout - of child widgets. - \row - \li \l {Drag and Drop} - \li Drag and drop provides a simple visual - mechanism which users can use to transfer - information between and within applications. - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" - cellspacing="1" border="0"> - <tr valign="top" bgcolor="#a2c511"> - <th>Qt Core Feature</th> - <th>Brief Description</th> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td> - <a href="http://doc.qt.io/qt-5/signalsandslots.html"> - Signals and Slots</a> - </td> - <td>Signals and slots are used for communication - between objects.</td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td> - <a href="http://doc.qt.io/qt-5/layout.html"> - Layout Management</a></td> - <td>The Qt layout system provides a simple - and powerful way of specifying the layout - of child widgets.</td> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td> - <a href="http://doc.qt.io/qt-5/dnd.html"> - Drag and Drop</a></td> - <td>Drag and drop provides a simple visual - mechanism which users can use to transfer - information between and within applications.</td> - </tr> - - </table> - \endraw - - See also \l {table-command} {\\table}, \l {header-command} - {\\header}, and \l {li-command} {\\li}. - - \target value-command - \section1 \\value - - The \\value command starts the documentation of a C++ enum item. - - The command's first argument is the enum item. Then follows its - associated description. The description argument ends at the next - blank line or \\value. The arguments are rendered within a table. - - The documentation will be located in the associated class, header - file or namespace documentation. See the \l {enum-command} - {\\enum} documentation for an example. - - \note Since Qt 5.4, \\value command can also be used outside the - \l {enum-command} {\\enum} topic. In this case, QDoc renders a - two-column table listing the constant name (taken as-is from the - first argument) and its description. This can be used, for - example, in \l {qmlproperty-command}{\\qmlproperty} topic for - documenting acceptable values for a QML enumeration property. - - See also \l {enum-command} {\\enum} and \l {omitvalue-command} {\\omitvalue}. - - \target omitvalue-command - \section1 \\omitvalue - - The \\omitvalue command excludes a C++ enum item from the - documentation. - - The command's only argument is the name of the enum item that will - be omitted. See the \l {enum-command} {\\enum} documentation for - an example. - - See also \l {enum-command} {\\enum} and \l {value-command} - {\\value}. - - \target list-command - \section1 \\list - - The \\list and \\endlist commands delimit a list of items. - - Create each list item with the \l {li-command} {\\li} command. A - list always contains one or more items. Lists can be nested. For - example: - - \code - / *! - \list - \li Qt Reference Documentation: Getting Started - \list - \li How to Learn Qt - \li Installation - \list - \li Qt/X11 - \li Qt/Windows - \li Qt/Mac - \li Qt/Embedded - \endlist - \li Tutorial and Examples - \endlist - \endlist - * / - \endcode - - QDoc renders this as: - - \list - \li Qt Reference Documentation: Getting Started - \list - \li How to Learn Qt - \li Installation - \list - \li Qt/X11 - \li Qt/Windows - \li Qt/Mac - \li Qt/Embedded - \endlist - \li Tutorial and Examples - \endlist - \endlist - - The \\list command takes an optional argument providing - alternative appearances for the list items. - - \code - / *! - \list - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - * / - \endcode - - QDoc renders the list items with bullets (the default): - - \list - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - - \warning There appears to be a bug in qdoc here. If you include - any of the argument types, you get a numeric list. We're looking - into it. - - If you provide 'A' as an argument to the \\list command, the - bullets are replaced with characters in alphabetical order: - - \list A - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - - If you replace 'A' with '1', the list items are numbered in - ascending order: - - \list 1 - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - - \endlist - - If you provide 'i' as the argument, the bullets are replaced with - roman numerals: - - \list i - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - - Finally, you can make the list items appear with roman numbers - following in ascending order if you provide 'I' as the optional - argument: - - \list I - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - - You can also make the listing start at any character or number by - simply provide the number or character you want to start at. For - example: - - \code - / *! - \list G - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - * / - \endcode - - \note This doesn't work in DITA XML, so don't use it because it - produces a DITA XML file that doesn't validate. There probably is - a way to do this in DITA, so if we figure it out, we will put it - in. But this capability is not used anywhere other than right - here, so it probably isn't important. For now, if you use this - option, qdoc will ignore it and produce a list without it. - - QDoc renders this as: - - \list G - \li How to Learn Qt - \li Installation - \li Tutorial and Examples - \endlist - - See also \l {li-command} {\\li}. - - \target li-command - \section1 \\li (table cell, list item) - - The \\li command marks a table cell or a list item. This command - is only used in \l{table-command} {tables} and \l{list-command} - {lists}. - - It considers everything as its argument until the next \\li command, until the - next \l {table-command} {\\endtable}, or \l {list-command} {\\endlist} - command. See \l {table-command} {\\table} and \l {list-command} {\\list} - for examples. - - If the command is used within a table, you can also specify - how many rows or columns the item should span. - - \code - / *! - \table - \header - \li {3,1} This header cell spans three columns - but only one row. - \row - \li {2, 1} This table item spans two columns - but only one row - \li {1, 2} This table item spans only one column, - but two rows. - \row - \li A regular table item - \li A regular table item - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" cellspacing="1" - border="0"> - - <tr valign="top" bgcolor="#a2c511"> - <th colspan="3" rowspan=" 1"> - This header cell spans three columns, but only one row. - </th> - </tr> - - <tr valign="top" bgcolor="#d0d0d0"> - <td colspan="2" rowspan=" 1"> - This table item spans two columns, but only one row. - </td> - <td rowspan=" 2"> - This table item spans only one column, but two rows. - </td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td>A regular table item</td> - <td>A regular table item</td> - </tr> - - </table> - \endraw - - If not specified, the item will span one column and one row. - - See also \l {table-command} {\\table}, \l {header-command} - {\\header}, and \l {list-command} {\\list}. - -*/ - - -/*! - \page 11-qdoc-commands-specialcontent.html - \previouspage Tables and Lists - \contentspage QDoc Manual - \nextpage Miscellaneous - - \title Special Content - - The document contents commands identify parts of the documentation, - parts with a special rendering, conceptual meaning or - function. - - \target abstract-command - \section1 \\abstract - - The \\abstract and \\endabstract commands delimit a - document's abstract section. - - The abstract section is rendered as an indented italicized - paragraph. - - \warning The \b{\\abstract} and \b{\\endabstract} commands - have not been implemented. The abstract section is rendered as a - regular HTML paragraph. - - \target quotation-command - \section1 \\quotation - - The \\quotation and \\endquotation commands delimit a long quotation. - - The text in the delimited block is surrounded by - \b{<blockquote>} and \b{</blockquote>} in the html output, - e.g.: - - \code - / *! - Although the prospect of a significantly broader market is - good news for Firstlogic, the notion also posed some - challenges. Dave Dobson, director of technology for the La - Crosse, Wisconsin-based company, said: - - \quotation - As our solutions were being adopted into new - environments, we saw an escalating need for easier - integration with a wider range of enterprise - applications. - \endquotation - * / - \endcode - - The text in the \b{\\quotation} block will appear in the generated HTML as: - - \code - <blockquote> - <p>As our solutions were being adopted into new environments, - we saw an escalating need for easier integration with a wider - range of enterprise applications.</p> - </blockquote> - \endcode - - The built-in style sheet for most browsers will render the - contents of the <blockquote> tag with left and right - indentations. The example above would be rendered as: - - \quotation - As our solutions were being adopted into new - environments, we saw an escalating need for easier - integration with a wider range of enterprise - applications. - \endquotation - - But you can redefine the \b{<blockquote>} tag in your style.css file. - - \target footnote-command - \section1 \\footnote - - The \\footnote and \\endfootnote commands delimit a footnote. - - The footnote is rendered at the bottom of the page. - - \warning The \b{\\footnote} and \b{\\endfootnote} commands - have not been implemented. The footnote is rendered as a regular - HTML paragraph. - - \target note-command - \section1 \\note - - The \\note command defines a new paragraph preceded by "Note:" - in bold. - - \target tableofcontents-command - \section1 \\tableofcontents - - The \\tableofcontents command has been disabled because QDoc - now generates a table of contents automatically. - - The automatically generated table of contents appears in the upper - righthand corner of the page. - - \target brief-command - \section1 \\brief - - The \\brief command introduces a one-sentence description of a - class, namespace, header file, property, or variable. - - The brief text is used to introduce the documentation of the - associated object, and in lists generated using the \l - {generatelist-command} {\\generatelist} command and the \l - {annotatedlist-command} {\\annotatedlist} command. - - The \\brief command can be used in two significant different ways: - \l {brief class} {One for classes, namespaces and header files}, - and \l {brief-property} {one for properties and variables}. - - \target brief-property - - When the \\brief command is used to describe a property or a - variable, the brief text must be a sentence fragment starting with - "whether" (for a boolean property or variable) or starting with - "the" (for any other property or variable). - - For example the boolean QWidget::isWindow property: - - \code - / *! - \property QWidget::isActiveWindow - \brief Whether this widget's window is the active window - - The active window is the window that contains the widget that - has keyboard focus. - - When popup windows are visible, this property is \c true - for both the active window \e and the popup. - - \sa activateWindow(), QApplication::activeWindow() - * / - \endcode - - and the QWidget::geometry property - - \code - / *! - \property QWidget::geometry - \brief The geometry of the widget relative to its parent and - excluding the window frame - - When changing the geometry, the widget, if visible, - receives a move event (moveEvent()) and/or a resize - event (resizeEvent()) immediately. - - ... - - \sa frameGeometry(), rect(), ... - * / - \endcode - - QDoc renders this as: - - \quotation - \raw HTML - <h3>geometry : - <a href="http://doc.qt.io/qt-5/qrect.html">QRect</a> - </h3> - \endraw - - This property holds the geometry of the widget relative - to its parent and excluding the window frame. - - ... - - Access functions: - \list - \li \b {const QRect & geometry () const} - \li \b {void setGeometry ( int x, int y, int w, int h )} - \li \b {void setGeometry ( const QRect & )} - \endlist - - See also \l - {QWidget::frameGeometry()} {frameGeometry()}, \l - {QWidget::rect()} {rect()}, ... - \endquotation - - \target brief class - - When the \\brief command is used to describe a class, we recommend - using a complete sentence like this: - - \code - The <classname> class is|provides|contains|specifies... - \endcode - - \warning Do not repeat your detailed description with the same sentence as - the brief statement will be the first paragraph of the detailed - description. - - \code - / *! - \class PreviewWindow - \brief The PreviewWindow class is a custom widget - displaying the names of its currently set - window flags in a read-only text editor. - - The PreviewWindow class inherits QWidget. The widget - displays the names of its window flags set with the - setWindowFlags() function. It is also provided with a - QPushButton that closes the window. - - ... - - \sa QWidget - * / - \endcode - - QDoc renders this as: - - \quotation - \raw HTML - <h1>PreviewWindow Class Reference</h1> - \endraw - - The PreviewWindow class is a custom widget displaying - the names of its currently set window flags in a - read-only text editor. \l {preview window} {More...} - - \raw HTML - <h3>Properties</h3> - \endraw - - \list - \li 52 properties inherited from QWidget - \li 1 property inherited from QObject - \endlist - - \raw HTML - <h3>Public Functions</h3> - \endraw - - \list - \li \l {constructor} {PreviewWindow}(QWidget *parent = 0) - \li void \l {function} {setWindowFlags}(Qt::WindowFlags flags) - \endlist - - \list - \li 183 public functions inherited from QWidget - \li 28 public functions inherited from QObject - \endlist - - \raw HTML - <h3>Public Slots</h3> - \endraw - - \list - \li 17 public slots inherited from QWidget - \li 1 public slot inherited from QObject - \endlist - - \raw HTML - <h3>Additional Inherited Members</h3> - \endraw - - \list - \li 1 signal inherited from QWidget - \li 1 signal inherited from QObject - \li 4 static public members inherited from QWidget - \li 4 static public members inherited from QObject - \li 39 protected functions inherited from QWidget - \li 7 protected functions inherited from QObject - \endlist - - \target preview window - - \raw HTML - <hr /> - <h2>Detailed Description</h2> - \endraw - - The PreviewWindow class is a custom widget displaying - the names of its currently set window flags in a - read-only text editor. - - The PreviewWindow class inherits QWidget. The widget - displays the names of its window flags set with the \l - {function} {setWindowFlags()} function. It is also - provided with a QPushButton that closes the window. - - ... - - See also QWidget. - - \raw HTML - <hr /> - <h2>Member Function Documentation</h2> - \endraw - - \target constructor - \raw HTML - <h3>PreviewWindow(QWidget *parent = 0)</h3> - \endraw - - Constructs a preview window widget with \e parent. - - \target function - \raw HTML - <h3>setWindowFlags(Qt::WindowFlags flags)</h3> - \endraw - - Sets the widgets flags using the - QWidget::setWindowFlags() function. - - Then runs through the available window flags, - creating a text that contains the names of the flags - that matches the flags parameter, displaying - the text in the widgets text editor. - \endquotation - - Using \\brief in a \l{namespace-command}{\\namespace}: - - \code - / *! - \namespace Qt - - \brief The Qt namespace contains miscellaneous identifiers - used throughout the Qt library. - * / - \endcode - - Using \\brief in a \l{headerfile-command}{\\headerfile}: - - \code - / *! - \headerfile <QtGlobal> - \title Global Qt Declarations - - \brief The <QtGlobal> header file provides basic - declarations and is included by all other Qt headers. - - \sa <QtAlgorithms> - * / - \endcode - - See also \l{property-command} {\\property}, \l{class-command} - {\\class}, \l{namespace-command} {\\namespace} and - \l{headerfile-command} {\\headerfile}. - - \target legalese-command - \section1 \\legalese - - The \\legalese and \\endlegalese commands delimit a license agreement. - - In the generated HTML, the delimited text is surrounded by a \b - {<div class="LegaleseLeft">} and \b {</div>} tags. - - An example of a license agreement enclosed in \\legalese - and \\endlegalese: - - \code - / *! - \legalese - Copyright 1996 Daniel Dardailler. - - Permission to use, copy, modify, distribute, and sell this - software for any purpose is hereby granted without fee, - provided that the above copyright notice appear in all - copies and that both that copyright notice and this - permission notice appear in supporting documentation, and - that the name of Daniel Dardailler not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. Daniel - Dardailler makes no representations about the suitability of - this software for any purpose. It is provided "as is" - without express or implied warranty. - - Modifications Copyright 1999 Matt Koss, under the same - license as above. - \endlegalese - * / - \endcode - - It will appear in the generated HTML as: - - \code - <div class="LegaleseLeft"> - <p>Copyright 1996 Daniel Dardailler.</p> - <p>Permission to use, copy, modify, distribute, and sell - this software for any purpose is hereby granted without fee, - provided that the above copyright notice appear in all - copies and that both that copyright notice and this - permission notice appear in supporting documentation, and - that the name of Daniel Dardailler not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. Daniel - Dardailler makes no representations about the suitability of - this software for any purpose. It is provided "as is" - without express or implied warranty.</p> - - <p>Modifications Copyright 1999 Matt Koss, under the same - license as above.</p> - </div> - \endcode - - If the \\endlegalese command is omitted, QDoc will process the - \\legalese command but considers the rest of the documentation - page as the license agreement. - - Ideally, the license text is located with the licensed code. - - Elsewhere, the documentation identified as \e{\\legalese} command - can be accumulated using \l {generatelist-command} {\\generatelist} - with \c {legalese-command} as the argument. This is useful for - generating an overview of the license agreements associated with - the source code. - - \target warning-command - \section1 \\warning - - The \\warning command prepends "Warning:" to the command's - argument, in bold font. - - \code - / *! - Qt::HANDLE is a platform-specific handle type - for system objects. This is equivalent to - \c{void *} on Windows and OS X, and to - \c{unsigned long} on X11. - - \warning Using this type is not portable. - * / - \endcode - - QDoc renders this as: - - \quotation - Qt::HANDLE is a platform-specific handle type - for system objects. This is equivalent to - \c{void *} on Windows and OS X, and to - \c{unsigned long} on X11. - - \warning Using this type is not portable. - \endquotation - -*/ - - -/*! - \page 12-0-qdoc-commands-miscellaneous.html - \previouspage Special Content - \contentspage QDoc Manual - \nextpage Creating DITA Maps - - \title Miscellaneous - - These commands provide miscellaneous functions connected to the - visual appearance of the documentation, and to the process of - generating the documentation. - - \target annotatedlist-command - \section1 \\annotatedlist - - The \\annotatedlist command expands to a list of the members of a - group, each member listed with its \e {brief} text. Below is an - example from the Qt Reference Documentation: - - \code - / *! - ... - \section1 Drag and Drop Classes - - These classes deal with drag and drop and the necessary mime type - encoding and decoding. - - \annotatedlist draganddrop - - * / - \endcode - - This generates a list of all the C++ classes and/or QML types in - the \e{draganddrop} group. A C++ class or QML type in the - \e{draganddrop} group will have \e{\\ingroup draganddrop} in its - \e{\\class} or \e{\\qmltype} comment. - - - \target generatelist-command - \section1 \\generatelist - - The \\generatelist command expands to a list of links to the - documentation entities in a group. Below is an example from the Qt - Reference Documentation: - - \code - / *! - \page classes.html - \title All Classes - - For a shorter list that only includes the most - frequently used classes, see \l{Qt's Main Classes}. - - \generatelist classes Q - * / - \endcode - - This generates the \e {All Classes} page. The command accepts the - following arguments: - - \target table example - \section2 \c annotatedclasses - - The \c annotatedclasses argument provides a table containing the - names of all the classes, and a description of each class. Each - class name is a link to the class's reference documentation. For - example: - - \table - \row - \li QDial - \li Rounded range control (like a speedometer or potentiometer) - \row - \li QDialog - \li The base class of dialog windows - \row - \li QDir - \li Access to directory structures and their contents - \endtable - - A C++ class is documented with the \l {class-command} {\\class} - command. The annotation for the class is taken from the argument - of the class comment's \l {brief-command} {\\brief} command. - - \target list example - \section2 \c {classes <prefix>} - - The \c classes argument provides a complete alphabetical list of - the classes. The second argument, \c{<prefix>}, is the common - prefix for the class names. The class names will be sorted on the - character that follows the common prefix. e.g. The common prefix - for the Qt classes is \c Q. The common prefix argument is - optional. If no common prefix is provided, the class names will - be sorted on their first character. - - Each class name becomes a link to the class's reference - documentation. This command is used to generate the - \e {All Classes} page this way: - - \code - / *! - \page classes.html - \title All Classes - \ingroup classlists - - \brief Alphabetical list of classes. - - This is a list of all Qt classes. For a list of the classes - provided for compatibility with Qt3, see \l{Qt3 Support - Classes}. For classes that have been deprecated, see the - \l{Obsolete Classes} list. - - \generatelist classes Q - * / - \endcode - - A C++ class is documented with the \l {class-command} {\\class} - command. - - \section2 \c classesbymodule - - When this argument is used, a second argument is required, which - specifies the module whose classes are to be listed. QDoc - generates a table containing those classes. Each class is listed - with the text of its \l{brief-command} {\\brief} command. - - For example, this command can be used on a module page as follows: - - \code - / *! - \page phonon-module.html - \module Phonon - \title Phonon Module - \ingroup modules - - \brief Contains namespaces and classes for multimedia functionality. - - \generatelist{classesbymodule Phonon} - - ... - - * / - \endcode - - Each class that is a member of the specified module must be marked - with the \l {inmodule-command} {\\inmodule} command in its \\class - comment. - - \section2 \c compatclasses - - The \c compatclasses argument generates a list in alphabetical - order of the support classes. It is normally used only to - generate the Qt3 Support Classes page this way: - - \code - / *! - \page compatclasses.html - \title Qt3 Support Classes - \ingroup classlists - - \brief Enable porting of code from Qt 3 to Qt 4. - - These are the classes that Qt provides for compatibility with Qt - 3. Most of these are provided by the Qt3Support module. - - \generatelist compatclasses - * / - \endcode - - A support class is identified in the \\class comment with the \l - {compat-command} {\\compat} command. - - \section2 \c functionindex - - The \c functionindex argument provides a complete alphabetical - list of all the documented member functions. It is normally used - only to generate the \e {Qt function index} page - this way: - - \code - / *! - \page functions.html - \title All Functions - \ingroup funclists - - \brief All documented Qt functions listed alphabetically with a - link to where each one is declared. - - This is the list of all documented member functions and global - functions in the Qt API. Each function has a link to the - class or header file where it is declared and documented. - - \generatelist functionindex - * / - \endcode - - \section2 \c legalese - - The \c legalese argument tells QDoc to generate a complete list of - licenses in the documentation. Each license is identified using - the \l {legalese-command} {\\legalese} command. This command is - used to generate the \e {Qt license information} - page this way: - - \code - / *! - \page licenses.html - \title Other Licenses Used in Qt - \ingroup licensing - \brief Information about other licenses used for Qt components and third-party code. - - Qt contains some code that is not provided under the - \l{GNU General Public License (GPL)}, - \l{GNU Lesser General Public License (LGPL)} or the - \l{Qt Commercial Edition}{Qt Commercial License Agreement}, but rather under - specific licenses from the original authors. Some pieces of code were developed - by The Qt Company and others originated from third parties. - This page lists the licenses used, names the authors, and links - to the places where it is used. - - The Qt Company gratefully acknowledges these and other contributions - to Qt. We recommend that programs that use Qt also acknowledge - these contributions, and quote these license statements in an - appendix to the documentation. - - See also: \l{Licenses for Fonts Used in Qt for Embedded Linux} - - \generatelist legalese - * / - \endcode - - \section2 \c overviews - - The \c overviews argument is used to tell QDoc to generate a list - by concatenating the contents of all the \l {group-command} - {\\group} pages. Qt uses it to generate the \e {overviews} page - this way: - - \code - / *! - \page overviews.html - - \title All Overviews and HOWTOs - - \generatelist overviews - * / - \endcode - - \section2 \c related - - The \c related argument is used in combination with the \l - {group-command} {\\group} and \l {ingroup-command} {\\ingroup} - commands to list all the overviews related to a specified - group. For example, the page for the \e {Programming with Qt} - page is generated this way: - - \code - / *! - \group qt-basic-concepts - \title Programming with Qt - - \brief The basic architecture of the Qt cross-platform application and UI framework. - - Qt is a cross-platform application and UI framework for - writing web-enabled applications for desktop, mobile, and - embedded operating systems. This page contains links to - articles and overviews explaining key components and - techniuqes used in Qt development. - - \generatelist {related} - * / - \endcode - - Each page listed on this group page contains the command: - - \code - \ingroup qt-basic-concepts - \endcode - - \target if-command - \section1 \\if - - The \\if command and the corresponding \\endif command - enclose parts of a QDoc comment that only will be included if - the condition specified by the command's argument is true. - - The command reads the rest of the line and parses it as an C++ #if - statement. - - \code - / *! - \if defined(opensourceedition) - - \b{Note:} This edition is for the development of - \l{Qt Open Source Edition} {Free and Open Source} - software only; see \l{Qt Commercial Editions}. - - \endif - * / - \endcode - - This QDoc comment will only be rendered if the \c - opensourceedition preprocessor symbol is defined, and specified in - the \l {defines-variable} {defines} variable in the configuration - file to make QDoc process the code within #ifdef and #endif: - - \code - defines = opensourceedition - \endcode - - You can also define the preprocessor symbol manually on the - command line. For more information see the documentation of the \l - {defines-variable} {defines} variable. - - See also \l{endif-command} {\\endif}, \l{else-command} {\\else}, - \l {defines-variable} {defines} and \l {falsehoods-variable} - {falsehoods}. - - \target endif-command - \section1 \\endif - - The \\endif command and the corresponding \\if command - enclose parts of a QDoc comment that will be included if - the condition specified by the \l {if-command} {\\if} command's - argument is true. - - For more information, see the documentation of the \l {if-command} - {\\if} command. - - See also \l{if-command} {\\if}, \l{else-command} {\\else}, \l - {defines-variable} {defines} and \l {falsehoods-variable} - {falsehoods}. - - \target else-command - \section1 \\else - - The \\else command specifies an alternative if the - condition in the \l {if-command} {\\if} command is false. - - The \\else command can only be used within \l {if-command} - {\\if...\\endif} commands, but is useful when there is only two - alternatives. - - \code - / *! - The Qt 3 support library is provided to keep old - source code working. - - In addition to the \c Qt3Support classes, Qt 4 provides - compatibility functions when it's possible for an old - API to cohabit with the new one. - - \if !defined(QT3_SUPPORT) - \if defined(QT3_SUPPORTWARNINGS) - The compiler emits a warning when a - compatibility function is called. (This works - only with GCC 3.2+ and MSVC 7.) - \else - To use the Qt 3 support library, you need to - have the line QT += qt3support in your .pro - file (qmake automatically define the - QT3_SUPPORT symbol, turning on compatibility - function support). - - You can also define the symbol manually (for example, - if you don't want to link against the \c - Qt3Support library), or you can define \c - QT3_SUPPORT_WARNINGS instead, telling the - compiler to emit a warning when a compatibility - function is called. (This works only with GCC - 3.2+ and MSVC 7.) - \endif - \endif - * / - \endcode - - If the \c QT3_SUPPORT is defined, the comment will be rendered - like this: - - \quotation - The Qt 3 support library is provided to keep old source - code working. - - In addition to the Qt3Support classes, Qt 4 provides - compatibility functions when it's possible for an old - API to cohabit with the new one. - \endquotation - - If \c QT3_SUPPORT is not defined but \c QT3_SUPPORT_WARNINGS is - defined, the comment will be rendered like this: - - \quotation - The Qt 3 support library is provided to keep old source - code working. - - In addition to the Qt3Support classes, Qt 4 provides - compatibility functions when it's possible for an old - API to cohabit with the new one. - - The compiler emits a warning when a compatibility - function is called. (This works only with GCC 3.2+ and - MSVC 7.) - \endquotation - - If none of the symbols are defined, the comment will be - rendered as - - \quotation - The Qt 3 support library is provided to keep old - source code working. - - In addition to the \c Qt3Support classes, Qt 4 provides - compatibility functions when it's possible for an old - API to cohabit with the new one. - - To use the Qt 3 support library, you need to have the - line QT += qt3support in your .pro file (qmake - automatically define the QT3_SUPPORT symbol, turning on - compatibility function support). - - You can also define the symbol manually (e.g., if you - don't want to link against the \c Qt3Support library), - or you can define \c QT3_SUPPORT_WARNINGS instead, - telling the compiler to emit a warning when a - compatibility function is called. (This works only with - GCC 3.2+ and MSVC 7.) - \endquotation - - See also \l{if-command} {\\if}, \l{endif-command} {\\endif}, \l - {defines-variable} {defines} and \l {falsehoods-variable} - {falsehoods}. - - \target include-command - \section1 \\include - - The \\include command sends all or part of the file specified by - its first argument to the QDoc input stream to be processed as a - QDoc comment snippet. This command is often assigned the alias, - \e {input}, in the QDoc configuration file, for example \e {alias.include - = input}. - - The command is useful when some snippet of commands and text is to - be used in multiple places in the documentation. In that case, - move the snippet into a separate file and use the \\include - command wherever you want to insert the snippet into the - documentation. To prevent QDoc from reading the file as a - stand-alone page of documentation, we recommend that you use the - \c .qdocinc extension for these \e {include} files. - - The command can have either one or two arguments. The first - argument is always a file name. The contents of the file must be - QDoc input, in other words, a sequence of QDoc commands and text, but - without the enclosing QDoc comment \c{/}\c{*!} ... \c{*}\c{/} delimiters. - If you want to include the entire named file, don't use the second - argument. If you want to include only part of the file, see the - \l{2-argument-form}{two argument form} below. Here is an example - of the one argument form: - - \code - / *! - \page corefeatures.html - \title Core Features - - \include examples/signalandslots.qdocinc - \include examples/objectmodel.qdocinc - \include examples/layoutmanagement.qdocinc - * / - \endcode - - QDoc renders this page \l{corefeatures.html} {as shown here}. - - \target 2-argument-form} - \section2 \\include filename snippet-identifier - - It is a waste of time to make a separate \c .qdocinc file for every - QDoc include snippet you want to use in multiple places in the - documentation, especially given that you probably have to put the - copyright/license notice in every one of these files. So if you - have a large number of snippets to be included, you can put them all in a - single file if you want, and surround each one with: - \code - //! [snippet-id1] - - QDoc commands and text... - - //! [snippet-id1] - - //! [snippet-id2] - - More QDoc commands and text... - - //! [snippet-id2] - \endcode - - Then you can use the two-argument form of the command: - - \code - \input examples/signalandslots.qdocinc snippet-id2 - \input examples/objectmodel.qdocinc another-snippet-id - \endcode - - It works as expected. The sequence of QDoc commands and text found - between the two tags with the same name as the second argument is - sent to the QDoc input stream. You can even nest these snippets, - although it's not clear why you would want to do that. - - \target meta-command - \section1 \\meta - - The \\meta command is mainly used for including metadata in DITA - XML files. It is also used when generating HTML output for specifying - the \e maintainer(s) of a C++ class. - - The command has two arguments: the first argument is the name of the - metadata attribute, and the second argument is the - value for the attribute. Each argument should be enclosed in curly - brackets, as shown in this example: - - \code - / *! - \class QWidget - \brief The QWidget class is the base class of all user interface objects. - - \ingroup basicwidgets - - \meta {technology} {User Interface} - \meta {platform} {OS X 10.6} - \meta {platform} {Symbian} - \meta {platform} {MeeGo} - \meta {audience} {user} - \meta {audience} {programmer} - \meta {audience} {designer} - * / - \endcode - - When running QDoc to generate HTML, the example above will have no - effect on the generated output, but if you run QDoc to generate - DITA XML, the example will generate the following: - - \code - <?xml version="1.0" encoding="UTF-8"?> - <!DOCTYPE cxxClass PUBLIC "-//NOKIA//DTD DITA C++ API Class Reference Type v0.6.0//EN" "dtd/cxxClass.dtd"> - <!--qwidget.cpp--> - <cxxClass id="id-9a14268e-6b09-4eee-b940-21a00a0961df"> - <apiName>QWidget</apiName> - <shortdesc>the QWidget class is the base class of all user interface objects.</shortdesc> - <prolog> - <author>Qt Development Frameworks</author> - <publisher>Qt Project</publisher> - <copyright> - <copyryear year="2015"/> - <copyrholder>Qt Project</copyrholder> - </copyright> - <permissions view="all"/> - <metadata> - <audience type="designer"/> - <audience type="programmer"/> - <audience type="user"/> - <category>Class reference</category> - <prodinfo> - <prodname>Qt Reference Documentation</prodname> - <vrmlist> - <vrm version="4" release="7" modification="3"/> - </vrmlist> - <component>QtGui</component> - </prodinfo> - <othermeta name="platform" content="MeeGo"/> - <othermeta name="platform" content="Symbian"/> - <othermeta name="platform" content="OS X 10.6"/> - <othermeta name="technology" content="User Interface"/> - </metadata> - </prolog> - \endcode - - In the example output, several values have been set using default - values obtained from the QDoc configuration file. See \l - {Generating DITA XML Output} for details. - - \target omit-command - \section1 \\omit - - The \\omit command and the corresponding \\endomit command - delimit parts of the documentation that you want QDoc to skip. For - example: - - \code - / *! - \table - \row - \li Basic Widgets - \li Basic GUI widgets such as buttons, comboboxes - and scrollbars. - - \omit - \row - \li Component Model - \li Interfaces and helper classes for the Qt - Component Model. - \endomit - - \row - \li Database Classes - \li Database related classes, e.g. for SQL databases. - \endtable - * / - \endcode - - QDoc renders this as: - - \raw HTML - <table align="center" cellpadding="2" - cellspacing="1" border="0"> - - <tr valign="top" bgcolor="#d0d0d0"> - <td>Basic Widgets</td> - <td>Basic GUI widgets such as buttons, comboboxes - and scrollbars.</td> - </tr> - - <tr valign="top" bgcolor="#c0c0c0"> - <td>Database Classes</td> - <td>Database related classes, e.g. for SQL databases.</td> - </tr> - </table> - \endraw - - \target raw-command - \section1 \\raw \span {class="newStuff"} {(avoid)} - - The \\raw command and the corresponding - \\endraw command delimit a block of raw mark-up language code. - - \note Avoid using this command if possible, because it generates - DITA XML code that causes problems. If you are trying to generate - special table or list behavior, try to get the behavior you want - using the \l {span-command} {\\span} and \l {div-command} {\\div} - commands in your \l {table-command} {\\table} or \l {list-command} - {\\list}. - - The command takes an argument specifying the code's format. - Currently, the only supported format is HTML. - - The \\raw command is useful if you want some special HTML effects - in your documentation. - - \code - / *! - Qt has some predefined QColor objects. - - \raw HTML - <style type="text/css" id="colorstyles"> - #color-blue { background-color: #0000ff; color: #ffffff } - #color-darkBlue { background-color: #000080; color: #ffffff } - #color-cyan { background-color: #00ffff; color: #000000 } - </style> - - <p> - <tt id="color-blue">Blue(#0000ff)</tt>, - <tt id="color-darkBlue">dark blue(#000080)</tt> and - <tt id="color-cyan">cyan(#00ffff)</tt>. - </p> - \endraw - * / - \endcode - - QDoc renders this as: - - \quotation - Qt has some predefined QColor objects. - - \raw HTML - <style type="text/css" id="colorstyles"> - #color-blue { background-color: #0000ff; color: #ffffff } - #color-darkBlue { background-color: #000080; color: #ffffff } - #color-cyan { background-color: #00ffff; color: #000000 } - </style> - - <p> - <tt id="color-blue">Blue(#0000ff)</tt>, - <tt id="color-darkBlue">dark blue(#000080)</tt> and - <tt id="color-cyan">cyan(#00ffff)</tt>. - </p> - \endraw - \endquotation - - \note But you can achieve the exact same thing using qdoc - commands. In this case, all you have to do is include the color - styles in your style.css file. Then you can write: - - \code - \tt {\span {id="color-blue"} {Blue(#0000ff)}}, - \tt {\span {id="color-darkBlue"} {dark blue(#000080)}} and - \tt {\span {id="color-cyan"} {cyan(#00ffff)}}. - \endcode - - ...which is rendered as: - - \tt {\span {id="color-blue"} {Blue(#0000ff)}}, - \tt {\span {id="color-darkBlue"} {dark blue(#000080)}} and - \tt {\span {id="color-cyan"} {cyan(#00ffff)}}. - - \target unicode-command - \section1 \\unicode - - The \\unicode command allows you to insert an arbitrary Unicode - character in the document. - - The command takes an argument specifying the character as an - integer. By default, base 10 is assumed, unless a '0x' or '0' - prefix is specified (for base 16 and 8, respectively). For - example: - - \code - O G\unicode{0xEA}nio e as Rosas - - \unicode 0xC0 table en famille avec 15 \unicode 0x20AC par jour - - \unicode 0x3A3 \e{a}\sub{\e{i}} - \endcode - - QDoc renders this as: - - \quotation - O G\unicode{0xEA}nio e as Rosas - - \unicode 0xC0 table en famille avec 15 \unicode 0x20AC par jour - - \unicode 0x3A3 \e{a}\sub{\e{i}} - \endquotation -*/ - |