diff options
Diffstat (limited to 'src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc')
-rw-r--r-- | src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc | 1714 |
1 files changed, 0 insertions, 1714 deletions
diff --git a/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc b/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc deleted file mode 100644 index 69980c1e18..0000000000 --- a/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc +++ /dev/null @@ -1,1714 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2015 The Qt Company Ltd. -** Contact: http://www.qt.io/licensing/ -** -** This file is part of the documentation of the Qt Toolkit. -** -** $QT_BEGIN_LICENSE:FDL$ -** Commercial License Usage -** Licensees holding valid commercial Qt licenses may use this file in -** accordance with the commercial license agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and The Qt Company. For licensing terms -** and conditions see http://www.qt.io/terms-conditions. For further -** information use the contact form at http://www.qt.io/contact-us. -** -** GNU Free Documentation License Usage -** Alternatively, this file may be used under the terms of the GNU Free -** Documentation License version 1.3 as published by the Free Software -** Foundation and appearing in the file included in the packaging of -** this file. Please review the following information to ensure -** the GNU Free Documentation License version 1.3 requirements -** will be met: http://www.gnu.org/copyleft/fdl.html. -** $QT_END_LICENSE$ -** -****************************************************************************/ - -/*! - \page 21-0-qdoc-configuration.html - \previouspage Creating DITA Maps - \contentspage QDoc Manual - \nextpage Generic Configuration Variables - - \title The QDoc Configuration File - - Before running QDoc, you must create a QDoc configuration file to - tell QDoc where to find the source files that contain the QDoc - comments. The pathname to your configuration file is passed to - QDoc on the command line: - - \quotation - \c {/current/dir$ ../../bin/qdoc ./config.qdocconf} - \endquotation - - \section1 General Description - - The configuration file is a list of entries of the form \e - {"variable = value"}. Using the configuration variables, you can - define where QDoc should find the various source files, images and - examples, where to put generated documentation etc. The - configuration file can also contain directives like \c - include. For an example, see \l {minimal-qdocconf}{a minimal qdocconf file}. - - You can also use configuration variables to get QDoc to support - \l{Supporting Derived Projects} {derived projects}, i.e QDoc can - generate links in your project's documentation to elements in the - Qt online documentation. See the \l {Supporting Derived projects} - section. - - The value of a configuration variable can be set using either '=' - or '+='. The difference is that '=' overrides the previous value, - while '+=' adds a new value to the current one. - - Some configuration variables accept a list of strings as their - value, for example: - \l {sourcedirs-variable} - {\c{sourcedirs}}, while others accept only a single string. Double - quotes around a value string are optional, but including them allows - you to use special characters like '=' and ' \" ' within the value - string, for example: - - \badcode - HTML.postheader = "<a href=\"index.html\">Home</a>" - \endcode - - If an entry spans many lines, use a backslash at the end of every - line but the last: - - \badcode - sourcedirs = kernel \ - tools \ - widgets - \endcode - - \section1 Configuration Variables - - \section1 Variable List - - \list - \li \l {alias-variable} {alias} - \li \l {Cpp.ignoredirectives-variable} {Cpp.ignoredirectives} - \li \l {Cpp.ignoretokens-variable} {Cpp.ignoretokens} - \li \l {defines-variable} {defines} - \li \l {edition-variable} {edition} - \li \l {exampledirs-variable} {exampledirs} - \li \l {examples-variable} {examples} - \li \l {examples.fileextensions-variable} {examples.fileextensions} - \li \l {excludedirs-variable} {excludedirs} - \li \l {excludefiles-variable} {excludefiles} - \li \l {extraimages-variable} {extraimages} - \li \l {falsehoods-variable} {falsehoods} - \li \l {headerdirs-variable} {headerdirs} - \li \l {headers-variable} {headers} - \li \l {headers.fileextensions-variable} {headers.fileextensions} - \li \l {HTML.footer-variable} {HTML.footer} - \li \l {HTML.postheader-variable} {HTML.postheader} - \li \l {HTML.style-variable} {HTML.style} - \li \l {imagedirs-variable} {imagedirs} - \li \l {images-variable} {images} - \li \l {images.fileextensions-variable} {images.fileextensions} - \li \l {language-variable} {language} - \li \l {macro-variable} {macro} - \li \l {manifestmeta-variable} {manifestmeta} - \li \l {outputdir-variable} {outputdir} - \li \l {outputformats-variable} {outputformats} - \li \l {outputprefixes-variable} {outputprefixes} - \li \l {outputsuffixes-variable} {outputsuffixes} - \li \l {sourcedirs-variable} {sourcedirs} - \li \l {sources-variable} {sources} - \li \l {sources.fileextensions-variable} {sources.fileextensions} - \li \l {spurious-variable} {spurious} - \li \l {tabsize-variable} {tabsize} - \li \l {version-variable} {version} - \li \l {versionsym-variable} {versionsym} - \endlist - - \section1 Categories - - \list - \li \l {Generic Configuration Variables} - \li \l {C++ Specific Configuration Variables} - \li \l {HTML Specific Configuration Variables} - \endlist - - \section1 Configuration File Examples - - \list - \li A minimum configuration file: \l minimum.qdocconf - \li The Qt configuration file: \l qtgui.qdocconf - \endlist -*/ - - -/*! - \page 22-qdoc-configuration-generalvariables.html - \previouspage The QDoc Configuration File - \contentspage QDoc Manual - \nextpage Creating Help Project Files - - \title Generic Configuration Variables - - With the general QDoc configuration variables, you can define - where QDoc will find the various source files it needs to generate - the documentation, as well as the directory to put the generated - documentation. You can also do some minor manipulation of QDoc - itself, controlling its output and processing behavior. - - \target alias-variable - \section1 alias - - The \c alias variable renames a QDoc command. - - The general syntax is \tt {alias.\e{original-command-name} = \e - temporary-command-name}. - - \badcode - alias.e = i - \endcode - - This renames the built-in command \\e (italics) to be \\i. The \c - alias variable is often used for compatibility reasons. - - See also \l {macro-variable} {macro}. - - \target codeindent-variable - \section1 codeindent - - The \c codeindent variable specifies the level of indentation that - QDoc uses when writing code snippets. - - QDoc originally used a hard-coded value of four spaces for code - indentation to ensure that code snippets could be easily - distinguished from surrounding text. Since we can use \l{HTML - Specific Configuration Variables#HTML.stylesheets} {stylesheets} - to adjust the appearance of certain types of HTML elements, this - level of indentation is not always required. - - \target codeprefix-variable - \target codesuffix-variable - \section1 codeprefix, codesuffix - - The \c codeprefix and \c codesuffix variables specify a pair of - strings that each code snippet is enclosed in. - - \target defines-variable - \section1 defines - - The \c defines variable specifies the C++ preprocessor symbols - that QDoc will recognize and respond to. - - When a preprocessor symbol is specified using the \c defines - variable, you can also use the \l {if-command} {\\if} command to - enclose documentation that only will be included if the - preprocessor symbol is defined. - - The values of the variable are regular expressions (see QRegExp - for details). By default, no symbol is defined, meaning that code - protected with #ifdef...#endif will be ignored. - - \badcode - defines = Q_QDOC \ - QT_.*_SUPPORT \ - QT_.*_LIB \ - QT_COMPAT \ - QT3_SUPPORT \ - Q_OS_.* \ - Q_BYTE_ORDER \ - __cplusplus - \endcode - - This ensures that QDoc will process the code that requires these - symbols to be defined. For example: - - \code - #ifdef Q_OS_WIN - HDC getDC() const; - void releaseDC(HDC) const; - #endif - \endcode - - Since the Q_OS_.* regular expression (specified using the \c - defines variable) matches Q_OS_WIN, QDoc will process the code - within #ifdef and #endif in our example. - - You can also define preprocessor symbols manually on the command - line using the -D option. For example: - - \badcode - currentdirectory$ qdoc -Dconsoleedition qtgui.qdocconf - \endcode - - In this case the -D option ensures that the \c consoleedition - preprocessor symbol is defined when QDoc processes the source - files defined in the qtgui.qdocconf file. - - See also \l {falsehoods-variable} {falsehoods} and \l {if-command} {\\if}. - - \target edition-variable - \section1 edition - - The \c edition variable specifies which modules are included in - each edition of a package, and provides QDoc with information to - provide class lists for each edition. - - This feature is mostly used when providing documentation for Qt - packages. - - The \c edition variable is always used with a particular edition - name to define the modules for that edition: - - \badcode - edition.Console = QtCore QtNetwork QtSql QtXml - edition.Desktop = QtCore QtGui QtNetwork QtOpenGL QtSql QtXml \ - QtDesigner QtAssistant Qt3Support QAxContainer \ - QAxServer - edition.DesktopLight = QtCore QtGui Qt3SupportLight - \endcode - - In the above examples, the \c Console edition only includes the - contents of four modules. Only the classes from these modules will - be used when the \l{Miscellaneous#generatelist-command} - {generatelist} command is used to generate a list of classes for - this edition: - - \badcode - \generatelist{classesbyedition Console} - \endcode - - \target exampledirs-variable - \section1 exampledirs - - The \c exampledirs variable specifies the directories containing - the source code of the example files. - - The \l {examples-variable} {examples} and \l - {exampledirs-variable} {exampledirs} variables are used by the \l - {quotefromfile-command} {\\quotefromfile}, \l {quotefile-command} - {\\quotefile} and \l {example-command} {\\example} commands. If - both the \l {examples-variable} {examples} and \l - {exampledirs-variable} {exampledirs} variables are defined, QDoc - will search in both, first in \l {examples-variable} {examples} - then in \l {exampledirs-variable} {exampledirs}. - - QDoc will search through the directories in the specified order, - and accept the first matching file it finds. It will only search - in the specified directories, \e not in subdirectories. - - \badcode - exampledirs = $QTDIR/doc/src \ - $QTDIR/examples \ - $QTDIR \ - $QTDIR/qmake/examples - - examples = $QTDIR/examples/widgets/analogclock/analogclock.cpp - \endcode - - When processing - - \badcode - \quotefromfile widgets/calculator/calculator.cpp - \endcode - - QDoc will see if there is a file called \c calculator.cpp - listed as a value in the \l {examples-variable} {\c examples} variable. If - there isn't, it will search in the \c exampledirs variable, and - first see if there exists a file called - - \badcode - $QTDIR/doc/src/widgets/calculator/calculator.cpp - \endcode - - If it doesn't, QDoc will continue looking for a file called - - \badcode - $QTDIR/examples/widgets/calculator/calculator.cpp - \endcode - - and so forth. - - See also \l {examples-variable}{examples}. - - \target examples-variable - \section1 examples - - The \c examples variable allows you to specify individual example - files in addition to those located in the directories specified by - the \l {exampledirs-variable} {\c exampledirs} variable. - - The \c examples and \l {exampledirs-variable} {\c exampledirs} - variables are used by the \l {quotefromfile-command} - {\\quotefromfile}, \l {quotefile-command} {\\quotefile} and \l - {example-command} {\\example} commands. If both the \c examples and \l - {exampledirs-variable} {\c exampledirs} variables are defined, - QDoc will search in both, first in \c examples then in \l - {exampledirs-variable} {\c exampledirs}. - - QDoc will search through the values listed for the \c examples - variable, in the specified order, and accept the first one it - finds. - - For an extensive example, see the \l {exampledirs-variable} {\c - exampledirs} command. But note that if you know the file is listed - in the \c examples variable, you don't need to specify its path: - - \badcode - \quotefromfile calculator.cpp - \endcode - - See also \l {exampledirs-variable} {exampledirs}. - - \target examples.fileextensions-variable - \section1 examples.fileextensions - - The \c examples.fileextensions variable specifies the file - extensions that qdoc will look for when collecting example files - for display in the documentation. - - The default extensions are *.cpp, *.h, *.js, *.xq, *.svg, *.xml - and *.ui. - - The extensions are given as standard wildcard expressions. You - can add a file extension to the filter using '+='. For example: - - \badcode - examples.fileextensions += *.qrc - \endcode - - See also \l{headers.fileextensions}. - - \target excludedirs-variable - \section1 excludedirs - - The \c excludedirs variable is for listing directories that should \e{not} - be processed by qdoc, even if the same directories are included by the - \l {sourcedirs-variable} {sourcedirs} or \l {headerdirs-variable} {headerdirs} - variables. - - For example: - - \badcode - sourcedirs = src/corelib - excludedirs = src/corelib/tmp - \endcode - - When executed, QDoc will exclude the listed directories from - further consideration. Files in these directories will not be - read by qdoc. - - See also \l {excludefiles-variable} {excludefiles}. - - \target excludefiles-variable - \section1 excludefiles - - The \c excludefiles variable allows you to specify individual files - that should \e{not} be processed by qdoc. - - \badcode - excludefiles += $QT_CORE_SOURCES/../../src/widgets/kernel/qwidget.h \ - $QT_CORE_SOURCES/../../src/widgets/kernel/qwidget.cpp - \endcode - - If you include the above in your qdocconf file for qtbase, there - will be no qwidget.html generated for html and no qwidget.xml - generated for DITA XML. - - See also \l {excludedirs-variable} {excludedirs}. - - \target extraimages-variable - \section1 extraimages - - The \c extraimages variable tells QDoc to incorporate specific - images in the generated documentation. - - QDoc will not recognize images used within HTML (or any other - markup language). If we want the images to be copied from the - directories specified by \l {imagedirs} {\c imagedirs} (the images - in question must be located in these directories) to the output - directory, we must specify the images using the \c extraimages - variable. - - The general syntax is \tt {extraimages.\e{format} = \e image}. The - file extension is optional. - - For example, in \l qtgui.qdocconf we use a couple of images within - the HTML.postheader variable which value is pure HTML. For that - reason, these images are specified using the \c extraimages - variable: - - \badcode - extraimages.HTML = qt-logo - \endcode - - See also \l images and \l imagedirs. - - \target falsehoods-variable - \section1 falsehoods - - The \c falsehoods variable defines the truth value of specified - preprocessor symbols as false. - - If this variable is not set for a preprocessor symbol, QDoc - assumes its truth value is true. The exception is '0', which value - always is false. - - QDoc will recognize, and is able to evaluate, the following - preprocessor syntax: - - \code - #ifdef NOTYET - ... - #endif - - #if defined (NOTYET) - ... - #end if - \endcode - - However, faced with unknown syntax like - - \code - #if NOTYET - ... - #endif - \endcode - - QDoc will evaluate it as true by default, \e unless the - preprocessor symbol is specified within the \c falsehoods variable - entry: - - \badcode - falsehoods = NOTYET - \endcode - - See also \l defines. - - \target generateindex-variable - \section1 generateindex - - The \c generateindex variable contains a boolean value that - specifies whether to generate an index file when HTML - documentation is generated. - - By default, an index file is always generated with HTML - documentation, so this variable is typically only used when - disabling this feature (by setting the value to \c false) or when - enabling index generation for the WebXML output (by setting the - value to \c true). - - \target headerdirs-variable - \section1 headerdirs - - The \c headerdirs variable specifies the directories containing - the header files associated with the \c .cpp source files used in - the documentation. - - \badcode - headerdirs = $QTDIR/src \ - $QTDIR/extensions/activeqt \ - $QTDIR/extensions/motif \ - $QTDIR/tools/designer/src/lib/extension \ - $QTDIR/tools/designer/src/lib/sdk \ - $QTDIR/tools/designer/src/lib/uilib - \endcode - - When executed, the first thing QDoc will do is to read through the - headers specified in the \l {headers} {\c headers} variable, and - the ones located in the directories specified in the \c headerdir - variable (including all subdirectories), building an internal - structure of the classes and their functions. - - Then it will read through the sources specified in the \l - {sources-variable} {\c sources}, and the ones located in the - directories specified in the \l {sourcedirs-variable} {\c - sourcedirs} varible (including all subdirectories), merging the - documentation with the structure it retrieved from the header - files. - - If both the \c headers and \c headerdirs variables are defined, - QDoc will read through both, first \l {headers} {\c headers} then - \c headerdirs. - - In the specified directories, QDoc will only read the files with - the \c fileextensions specified in the \l {headers.fileextensions} - {\c headers.fileextensions} variable. The default extensions are - *.ch, *.h, *.h++, *.hh, *.hpp, and *.hxx". The files specified by - \l {headers} {\c headers} will be read without taking into account - their fileextensions. - - See also \l headers and \l headers.fileextensions. - - \target headers-variable - \section1 headers - - The \c headers variable allows you to specify individual header - files in addition to those located in the directories specified by - the \l {headerdirs} {\c headerdirs} variable. - - \badcode - headers = $QTDIR/src/gui/widgets/qlineedit.h \ - $QTDIR/src/gui/widgets/qpushbutton.h - \endcode - - When processing the \c headers variable, QDoc behaves in the same - way as it does when processing the \l {headerdirs} {\c headerdirs} - variable. For more information, see the \l {headerdirs} {\c - headerdirs} variable. - - See also \l headerdirs. - - \target headers.fileextensions-variable - \section1 headers.fileextensions - - The \c headers.fileextensions variable specify the extension used - by the headers. - - When processing the header files specified in the \l {headerdirs} - {\c headerdirs} variable, QDoc will only read the files with the - fileextensions specified in the \c headers.fileextensions - variable. In this way QDoc avoids spending time reading irrelevant - files. - - The default extensions are *.ch, *.h, *.h++, *.hh, *.hpp, and - *.hxx. - - The extensions are given as standard wildcard expressions. You - can add a file extension to the filter using '+='. For example: - - \badcode - header.fileextensions += *.H - \endcode - - \warning The above assignment may not work as described. - - See also \l headerdirs. - - \target imagedirs-variable - \section1 imagedirs - - The \c imagedirs variable specifies the directories containing the - images used in the documentation. - - The \l {images} {\c images} and \c imagedirs variables are used by - the \l {image-command} {\\image} and \l {inlineimage-command} - {\\inlineimage} commands. If both the \l {images} {\c images} and - \c imagedirs variables are defined, QDoc will search in both. First - in \l {images} {\c images}, then in \c imagedirs. - - QDoc will search through the directories in the specified order, - and accept the first matching file it finds. It will only search - in the specified directories, \e not in subdirectories. - - \badcode - imagedirs = $QTDIR/doc/src/images \ - $QTDIR/examples - - images = $QTDIR/doc/src/images/calculator-example.png - \endcode - - When processing - - \badcode - \image calculator-example.png - \endcode - - QDoc will then see if there is a file called - calculator-example.png listed as a value in the \c images - variable. If there isn't, it will search in the \c imagedirs - variable for: - - \badcode - $QTDIR/doc/src/images/calculator-example.png - \endcode - - If the file doesn't exist, QDoc will look for a file called - - \badcode - $QTDIR/examples/calculator-example.png - \endcode - - You can filter the images in an image directory using the \l - {images.fileextensions} {\c images.fileextensions} variable. The - general idea behind the \l {images.fileextensions} {\c images.fileextensions} - variable is to enable different image format for different output format. - - \warning The \l {images.fileextensions} {\c images.fileextensions} - variable's functionality is preliminary since QDoc at this point - only supports HTML. - - See also \l images and \l images.fileextensions. - - \target images-variable - \section1 images - - The \c images variable allows you to specify individual image - files in addition to those located in the directories specified by - the \l {imagedirs} {\c imagedirs} variable. - - \badcode - images = $QTDIR/doc/src/images/calculator-example.png - \endcode - - When processing the \c images variable, QDoc behaves in the same - way as it does when processing the \l {imagedirs} {\c imagedirs} - variable. For more information, see the \l {imagedirs} {\c - imagedirs} variable. - - See also \l imagedirs and \l images.fileextensions. - - \target images.fileextensions-variable - \section1 images.fileextensions - - The images.fileextensions variable filters the files within an - image directory. - - The variable's values (the extensions) are given as standard - wildcard expressions. The general syntax is: \tt - {images.fileextensions.\e{format} = *.\e{extension}}. - - The idea is to enable different image format for different output - format. - - \badcode - images.fileextensions.HTML = *.png - images.fileextensions.LOUT = *.eps - \endcode - - Then, when processing the \l {image-command} {\\image} and \l - {inlineimage-command} {\\inlineimage} commands, QDoc will only - search for files with extensions specified in the variable - containing the list of output formats. - - \warning This is only a preliminary functionality since QDoc at this - point only supports HTML. - - The default extensions for HTML are *.png, *.jpg, *.jpeg, and - *.gif. - - You can add a file extension to the filter using '+='. For - example: - - \badcode - images.fileextensions.HTML += *.eps - \endcode - - See also \l imagedirs and \l images. - - \target language-variable - \section1 language - - The \c language variable specifies the language of the source code - that is used in the documentation. - - Currently, C++ is the only language that QDoc understands. It is - also the default language, and doesn't really need to be - specified. However, a possible example of a language variable - statement: - - \badcode - language = Cpp - \endcode - - This identifies C++ as the language of the Qt source code. - - \target macro-variable - \section1 macro - - The \c macro variable is used to create your own simple QDoc - commands. The syntax is \tt {macro.\e{command} = \e{definition}}, - where the definition is written using QDoc syntax. - - A macro variable can be restricted for use in one type of output - generation. By appending \c {.HTML} to the macro name, for - example, the macro is only used when generating HTML output. By - appending \c {.DITAXML} to the macro name, the macro is only used - when generating DITA XML. - - \badcode - macro.gui = "\\b" - macro.raisedaster.HTML = "<sup>*</sup>" - \endcode - - The first macro defines the \\gui command to render its argument - using a bold font. The second macro defines the \\raisedaster - command to render a superscript asterisk, but only when generating - HTML. - - A macro can also take up to seven parameters: - - \badcode - macro.hello = "Hello \1!" - \endcode - - Parameters are passed to macros the same way as to other commands: - - \badcode - \hello World - \endcode - - See also \l {alias-variable} {alias}. - - \target manifestmeta-variable - \section1 manifestmeta - - The \c manifestmeta variable specifies additional meta-content - for the example manifest files generated by QDoc. - - See the \l{Manifest Meta Content} section for more information. - - \target naturallanguage-variable - \section1 naturallanguage - - The \c naturallanguage variable specifies the natural language - used for the documentation generated by qdoc. - - \badcode - naturallanguage = zh-Hans - \endcode - - By default, the natural language is \c en for compatibility with - legacy documentation. - - qdoc will add the natural language information to the HTML it - generates, using the \c lang and \c xml:lang attributes. - - See also \l {sourceencoding-variable} {sourceencoding}, - \l {outputencoding-variable} {outputencoding}, - \l{http://www.w3.org/TR/xhtml1/#C_7} - {C.7. The lang and xml:lang Attributes} and - \l{http://www.w3.org/TR/i18n-html-tech-lang/#ri20040429.113217290} - {Best Practice 13: Using Hans and Hant codes}. - - \target outputdir-variable - \section1 outputdir - - The \c outputdir variable specifies the directory where QDoc will - put the generated documentation. - - \badcode - outputdir = $QTDIR/doc/html - \endcode - - locates the generated Qt reference documentation in - $QTDIR/doc/html. For example, the documentation of the QWidget - class is located in - - \badcode - $QTDIR/doc/html/qwidget.html - \endcode - - The associated images will be put in an \c images subdirectory. - - \warning When running QDoc multiple times using the same output - directory, all files from the previous run will be lost. - - \target outputencoding-variable - \section1 outputencoding - - The \c outputencoding variable specifies the encoding used for the - documentation generated by qdoc. - - \badcode - outputencoding = UTF-8 - \endcode - - By default, the output encoding is \c ISO-8859-1 (Latin1) for - compatibility with legacy documentation. When generating - documentation for some languages, particularly non-European - languages, this is not sufficient and an encoding such as UTF-8 is - required. - - qdoc will encode HTML using this encoding and generate the correct - declarations to indicate to browsers which encoding is being - used. The \l naturallanguage configuration variable should also be - specified to provide browsers with a complete set of character - encoding and language information. - - See also \l outputencoding and \l naturallanguage. - - \target outputformats-variable - \section1 outputformats - - The \c outputformats variable specifies the format of - the generated documentation. - - Currently, QDoc only supports the HTML format. It is also - the default format, and doesn't need to be specified. - - \target outputprefixes-variable - \section1 outputprefixes - - The \c outputprefixes variable specifies a mapping between types of files - and the prefixes to prepend to the HTML file names in the generated - documentation. - - \badcode - outputprefixes = QML JS - outputprefixes.QML = uicomponents- - outputprefixes.JS = uicomponents- - \endcode - - By default, files containing the API documentation for QML types - are prefixed with "qml-", and javaScript types with "js-". In the - above example, the prefix \c "uicomponents" is used instead for - both. - - The output prefix is applied to file names for documentation on - QML and JS types. - - \target outputsuffixes-variable - \section1 outputsuffixes - - The \c outputsuffixes variable specifies a mapping between types of - files and module name suffixes to append to the HTML file names. - - \badcode - outputsuffixes = QML - outputsuffixes.QML = -tp - \endcode - - Given a QML module name \e FooBar and the default - \l {outputprefixes-variable}{output prefix} ("qml-"), the file name of - the generated HTML page for a QML type \e FooWidget would be - \c qml-foobar-tp-foowidget.html. - - By default, no suffix is used. The output suffix, if defined, is applied - to file names for documentation on QML and JS types, and their respective - module pages. - - The \c outputsuffixes variable was introduced in QDoc 5.6. - - \target qhp-variable - \section1 qhp - - The \c qhp variable is used to define the information to be - written out to Qt Help Project (\c{qhp}) files. - - See the \l{Creating Help Project Files} chapter for information - about this process. - - \target sourcedirs-variable - \section1 sourcedirs - - The \c sourcedirs variable specifies the directories containing - the \c .cpp or \c .qdoc files used in the documentation. - - \badcode - sourcedirs += .. \ - ../../../examples/gui/doc/src - \endcode - - When executed, the first thing QDoc will do is to read through the - headers specified in the \l {header-command} {\c header} variable, - and the ones located in the directories specified in the \c - headerdir variable (including all subdirectories), building an - internal structure of the classes and their functions. - - Then it will read through the sources specified in the \l - {sources} {\c sources}, and the ones located in the directories - specified in the \l {sourcedirs} {\c sourcedirs} variable - (including all subdirectories), merging the documentation with the - structure it retrieved from the header files. - - If both the \c sources and \c sourcedirs variables are defined, - QDoc will read through both, first \l {sources} {\c sources} then - \c sourcedirs. - - In the specified directories, QDoc will only read the files with - the \c fileextensions specified in the \l {sources.fileextensions} - {\c sources.fileextensions} variable. The default extensions are - *.c++, *.cc, *.cpp and *.cxx. The files specified by \l {sources} - {\c sources} will be read independent of their fileextensions. - - See also \l {sources-variable} {sources} and - \l {sources.fileextensions-variable} {sources.fileextensions}. - - \target sourceencoding-variable - \section1 sourceencoding - - The \c sourceencoding variable specifies the encoding used for the - source code and documentation. - - \badcode - sourceencoding = UTF-8 - \endcode - - By default, the source encoding is \c ISO-8859-1 (Latin1) for - compatibility with legacy documentation. For some languages, - particularly non-European languages, this is not sufficient and an - encoding such as UTF-8 is required. - - Although qdoc will use the encoding to read source and - documentation files, limitations of C++ compilers may prevent you - from using non-ASCII characters in source code comments. In cases - like these, it is possible to write API documentation completely - in documentation files. - - See also \l {naturallanguage-variable} {naturallanguage} and - \l {outputencoding-variable} {outputencoding}. - - \target sources-variable - \section1 sources - - The \c sources variable allows you to specify individual source - files in addition to those located in the directories specified by - the \l {sourcedirs-variable} {sourcedirs} variable. - - \badcode - sources = $QTDIR/src/gui/widgets/qlineedit.cpp \ - $QTDIR/src/gui/widgets/qpushbutton.cpp - \endcode - - When processing the \c sources variable, QDoc behaves in the same - way as it does when processing the \l {sourcedirs-variable} - {sourcedirs} variable. For more information, see the \l - {sourcedirs-variable} {sourcedirs} variable. - - See also \l {sourcedirs-variable} {sourcedirs}. - - \target sources.fileextensions-variable - \section1 sources.fileextensions - - The \c sources.fileextensions variable filters the files within a - source directory. - - When processing the source files specified in the \l {sourcedirs} - {\c sourcedirs} variable, QDoc will only read the files with the - fileextensions specified in the \c sources.fileextensions - variable. In this way QDoc avoid spending time reading irrelevant - files. - - The default extensions are *.c++, *.cc, *.cpp and *.cxx. - - The extensions are given as standard wildcard expressions. You - can add a file extension to the filter using '+='. For example: - - \badcode - sources.fileextensions += *.CC - \endcode - - \warning The above assignment may not work as described. - - See also \l {sourcedirs-variable} {sourcedirs} and \l - (sources-variable} {sources}. - - - \target spurious-variable - \section1 spurious - - The \c spurious variable excludes specified QDoc warnings from the - output. The warnings are specified using standard wildcard - expressions. - - \badcode - spurious = "Cannot find .*" \ - "Missing .*" - \endcode - - makes sure that warnings matching either of these expressions, - will not be part of the output when running QDoc. For example - would the following warning be omitted from the output: - - \badcode - src/opengl/qgl_mac.cpp:156: Missing parameter name - \endcode - - \target syntaxhighlighting - \section1 syntaxhighlighting - - The \c syntaxhighlighting variable specifies whether QDoc should - perform syntax highlighting on source code quoted in the - documentation it generates. - - \badcode - syntaxhighlighting = true - \endcode - - will enable syntax highlighting for all supported programming - languages. - - \target tabsize-variable - \section1 tabsize - - The \c tabsize variable defines the size of a tab character. - - \badcode - tabsize = 4 - \endcode - - will give the tab character the size of 4 spaces. The default - value of the variable is 8, and doesn't need to be specified. - - \target tagfile-variable - \section1 tagfile - - The \c tagfile variable specifies the Doxygen tag file to be - written when HTML is generated. - - \target version-variable - \section1 version - - The \c version variable specifies the version number of the - documented software. - - \badcode - version = 5.6.0 - \endcode - - When a version number is specified (using the \tt{\l version} or - \tt {\l versionsym} variables in a \c .qdocconf file), it is - accessible through the corresponding \\version command for use in - the documentation. - - \warning The \\version command's functionality is not fully - implemented; currently it only works within raw HTML code. - - See also \l versionsym. - - \target versionsym-variable - \section1 versionsym - - The \c versionsym variable specifies a C++ preprocessor symbol - that defines the version number of the documented software. - - \badcode - versionsym = QT_VERSION_STR - \endcode - - QT_VERSION_STR is defined in qglobal.h as follows - - \badcode - #define QT_VERSION_STR "4.0.1" - \endcode - - When a version number is specified (using the \tt{\l version} or - \tt {\l versionsym} variables in a \c .qdocconf file), it is - accessible through the corresponding \\version command for use in - the documentation. - - \warning The \\version command's functionality is not fully - implemented. Currently, it only works within raw HTML code. - - See also \l {version} {\\version}. -*/ - -/*! - \page 22-creating-help-project-files.html - \previouspage Generic Configuration Variables - \contentspage QDoc Manual - \nextpage C++ Specific Configuration Variables - - \title Creating Help Project Files - - \section1 Overview - - Qt Assistant uses a system for managing Qt documentation that requires - QDoc to generate inventories of files in a format that is similar to the - old style DCF format, but with additional features. - - QDoc allows configuration variables to be used to specify which pages are - to be used in each documentation set it generates. These are specified as - subvariables of the \c qhp variable with each set declared using a unique - identifier as a subvariable. - - For example, the configuration file for the Qt Quick documentation set - specifies information about the set as subvariables with the - \c{qhp.QtQuick} prefix: - - \badcode - qhp.projects = QtQuick - - qhp.QtQuick.file = qtquick.qhp - qhp.QtQuick.namespace = org.qt-project.qtquick.$QT_VERSION_TAG - qhp.QtQuick.virtualFolder = qtquick - qhp.QtQuick.indexTitle = Qt Quick - qhp.QtQuick.indexRoot = - - qhp.QtQuick.filterAttributes = qtquick $QT_VERSION qtrefdoc - qhp.QtQuick.customFilters.Qt.name = QtQuick $QT_VERSION - qhp.QtQuick.customFilters.Qt.filterAttributes = qtquick $QT_VERSION - - qhp.QtQuick.subprojects = qmltypes classes examples - - qhp.QtQuick.subprojects.qmltypes.title = QML Types - qhp.QtQuick.subprojects.qmltypes.indexTitle = Qt Quick QML Types - qhp.QtQuick.subprojects.qmltypes.selectors = qmlclass - qhp.QtQuick.subprojects.qmltypes.sortPages = true - - qhp.QtQuick.subprojects.classes.title = Classes - qhp.QtQuick.subprojects.classes.title = C++ Classes - qhp.QtQuick.subprojects.classes.indexTitle = Qt Quick C++ Classes - qhp.QtQuick.subprojects.classes.selectors = class fake:headerfile - qhp.QtQuick.subprojects.classes.sortPages = true - - qhp.QtQuick.subprojects.examples.title = Examples - qhp.QtQuick.subprojects.examples.indexTitle = Qt Quick Examples and Tutorials - qhp.QtQuick.subprojects.examples.selectors = fake:example - \endcode - - The documentation set may include one or more subprojects, which are added - to the table of contents under the name specified by \c title. The page - in the documentation referred to by the \c indexTitle acts as the index page - for the subproject. The page types to list under the subproject are specified - by \c selectors. The entries are alphabetically sorted if \c sortPages is set - to \c true. - - \section2 Using Selectors - - The \c selectors property specifies which page types are listed under the - table of contents entry for a subproject. Multiple selectors can be listed, - separated by whitespace. - - \table - \header \li Selector \li Description - \row \li \c namespace \li Namespaces - \row \li \c class \li Classes - \row \li \c qmltype \li QML Types - \row \li \c qmlclass \li Alias for \c qmltype. - \row \li \c module \li C++ Modules - \row \li \c qmlmodule \li QML Modules - \row \li \c doc[:subtype] \li Documentation pages with a specified - \c subtype. Multiple subtypes can be - listed as a comma-separated list. - \row \li \c fake \li Alias for \c doc. - \row \li \c group[:groupname] \li Documentation pages for members of a - specified group, as added using the - \l {ingroup-command} - {\\ingroup} groupname command. - Multiple group names can be listed as - a comma-separated list. - (Introduced in QDoc 5.6). - \endtable - - Available subtypes for the \c doc selector: - - \table - \header \li Subtype \li Description - \row \li \c example \li Examples - \row \li \c headerfile \li Header files - \row \li \c page \li Documentation pages defined with the - \l {page-command} {\\page} command. - \endtable - - For example, the following configuration would select example pages and - pages that include the \c {\ingroup tutorials} command: - - \badcode - qhp.QtQuickControls.subprojects = examples - qhp.QtQuickControls.subprojects.examples.title = Examples and Tutorials - qhp.QtQuickControls.subprojects.examples.indexTitle = Qt Quick Controls Examples - qhp.QtQuickControls.subprojects.examples.selectors = doc:example group:tutorials - qhp.QtQuickControls.subprojects.examples.sortPages = true - \endcode - - \section2 Adding Table of Contents - - To create a table of contents for a manual, create a subproject with - a \c{type} property and set it to \c{manual}. The page in the documentation - referred to by the \c{indexTitle} property must contain a list of links - that acts as a table of contents for the whole manual. QDoc will take the - information in this list and create a table of contents for the subproject. - - For example, the configuration file for Qt Creator defines only one - subproject for its documentation, including all the documentation in a - single manual: - - \badcode - qhp.QtCreator.subprojects = manual - qhp.QtCreator.subprojects.manual.title = Qt Creator Manual - qhp.QtCreator.subprojects.manual.indexTitle = Qt Creator Manual - qhp.QtCreator.subprojects.manual.type = manual - \endcode - - In this example, the page entitled "Qt Creator Manual" contains a nested - list of links to pages in the documentation which is duplicated in - Qt Assistant's Contents tab. -*/ - -/*! - \page 23-qdoc-configuration-cppvariables.html - \previouspage Creating Help Project Files - \contentspage QDoc Manual - \nextpage HTML Specific Configuration Variables - - \title C++ Specific Configuration Variables - - The C++ specific configuration variables are provided to avoid - erroneous documentation due to non-standard C++ constructs. - - \target Cpp.ignoredirectives-variable - \section1 Cpp.ignoredirectives - The \c Cpp.ignoredirectives variable makes QDoc ignore the - specified non-standard constructs, within C++ source code. - - If not specified by the \tt {\l Cpp.ignoretokens} or \tt {\l - Cpp.ignoredirectives} variables, non-standard constructs - (typically macros) can result in erroneous documentation. - - \badcode - Cpp.ignoredirectives = Q_DECLARE_INTERFACE \ - Q_DECLARE_OPERATORS_FOR_FLAGS \ - Q_DECLARE_PRIVATE \ - Q_DECLARE_PUBLIC \ - Q_DISABLE_COPY \ - Q_DUMMY_COMPARISON_OPERATOR \ - Q_ENUMS \ - Q_FLAGS \ - Q_INTERFACES \ - __attribute__ - \endcode - - makes sure that when processing the code below, for example, QDoc - will simply ignore the 'Q_ENUMS' and 'Q_FLAGS' expressions: - - \code - class Q_CORE_EXPORT Qt { - Q_OBJECT - Q_ENUMS(Orientation TextFormat BackgroundMode - DateFormat ScrollBarPolicy FocusPolicy - ContextMenuPolicy CaseSensitivity - LayoutDirection ArrowType) - Q_ENUMS(ToolButtonStyle) - Q_FLAGS(Alignment) - Q_FLAGS(Orientations) - Q_FLAGS(DockWidgetAreas) - - public: - ... - }; - \endcode - - The Q_OBJECT macro, however, is an exception: QDoc recognizes this - particular non-standard construct, so there is no need specifying - it using the \tt {\l Cpp.ignoredirectives} variable. - - Regarding the Q_CORE_EXPORT macro; see the documentation of the - \tt {\l Cpp.ignoretokens} variable. - - See also \l Cpp.ignoretokens. - - \target Cpp.ignoretokens-variable - \section1 Cpp.ignoretokens - - The \c Cpp.ignoretokens variable makes QDoc ignore the specified - non-standard constructs, within C++ source code. - - If not specified by the \tt {\l Cpp.ignoretokens} or \tt {\l - Cpp.ignoredirectives} variables, non-standard constructs - (typically macros) can result in erroneous documentation. - - In \l qtgui.qdocconf: - - \badcode - Cpp.ignoretokens = QAXFACTORY_EXPORT \ - QM_EXPORT_CANVAS \ - ... - Q_COMPAT_EXPORT \ - Q_CORE_EXPORT \ - Q_EXPLICIT \ - Q_EXPORT \ - ... - Q_XML_EXPORT - \endcode - - makes sure that when processing the code below, for example, QDoc - will simply ignore the 'Q_CORE_EXPORT' expression: - - \code - class Q_CORE_EXPORT Qt { - Q_OBJECT - Q_ENUMS(Orientation TextFormat BackgroundMode - DateFormat ScrollBarPolicy FocusPolicy - ContextMenuPolicy CaseSensitivity - LayoutDirection ArrowType) - Q_ENUMS(ToolButtonStyle) - Q_FLAGS(Alignment) - Q_FLAGS(Orientations) - Q_FLAGS(DockWidgetAreas) - public: - ... - }; - \endcode - - Regarding the Q_OBJECT, Q_ENUMS and Q_FLAGS macros; see the - documentation of the \tt {\l Cpp.ignoredirectives} variable. - - See also \l Cpp.ignoredirectives. -*/ - -/*! - \page 24-qdoc-configuration-htmlvariables.html - \previouspage C++ Specific Configuration Variables - \contentspage QDoc Manual - \nextpage Supporting Derived Projects - - \title HTML Specific Configuration Variables - - The HTML specific configuration variables define the generated - documentation's style, or define the contents of the - documentation's footer or postheader. The format of the variable - values are raw HTML. - - \target HTML.footer-variable - \section1 HTML.footer - - The \c HTML.footer variable defines the content of the generated - HTML documentation's footer. - - The footer is rendered at the bottom of the generated - documentation page. - - The variable's value is given as raw HTML code enclosed by - quotation marks. Note that if the value spans several lines, each - line needs to be enclosed by quotation marks. - - \badcode - HTML.footer = "<p /><address><hr /><div align=\"center\">\n" \ - ... - "</tr></table></div></address>" - \endcode - - \target HTML.postheader-variable - \section1 HTML.postheader - - The \c HTML.postheader variable defines the content of the - generated HTML documentation's postheader. - - The header is rendered at the top of the generated documentation - page. - - The variable's value is given as raw HTML enclosed by quotation - marks. Note that if the value spans several lines, each line needs - to be enclosed by quotation marks. - - \badcode - HTML.postheader = "<table border=\"0\"..." \ - ... - "<img src=\"images/qt-logo.png\" \ - "align=\"right\" width=\"203\" height=\"32\""\ - "border=\"0\" />" \ - "</td></tr>" \ - "</table>" - \endcode - - The complete variable entry in \l qtgui.qdocconf provides the - standard header of the \l {http://doc.qt.io/qt-5/qtgui-index.html} - {Qt GUI Documentation}. - - \target HTML.style-variable - \section1 HTML.style - - The HTML.style variable defines the style for - the generated HTML documentation. - - The variable's value is given as raw HTML enclosed by quotation - marks. Note that if the value spans several lines, each line needs - to be enclosed by quotation marks. - - \badcode - HTML.style = "h3.fn,span.fn" \ - "{ margin-left: 1cm; text-indent: -1cm; }\n" \ - "a:link { color: #004faf; text-decoration: none }\n" \ - "a:visited" \ - "{ color: #672967; text-decoration: none }\n" \ - "td.postheader { font-family: sans-serif }\n" \ - "tr.address { font-family: sans-serif }\n" \ - "body { background: #ffffff; color: black; }" - \endcode - - \target HTML.stylesheets-variable - \section1 HTML.stylesheets - - The HTML.stylesheets variable defines a list of stylesheets - to use for the generated HTML documentation. - - Using separate stylesheets for the documentation makes it easier - to customize and experiment with the style used once the contents - has been generated. Typically, it is only necessary to define a - single stylesheet for any set of documentation; for example: - - \badcode - HTML.stylesheets = classic.css - \endcode - - QDoc expects to find stylesheets in the directory containing the - \l qtgui.qdocconf file, and it will copy those specified to the output - directory alongside the HTML pages. - - \target HTML.tocdepth - \section1 HTML.tocdepth - - The HTML.tocdepth variable defines how many document sections are printed in - the table of contents. Setting tocdepth to \c 0 disables the table of - contents while not setting the variable prints all document sections. - -*/ - -/*! - \page 25-qdoc-configuration-derivedprojects.html - \previouspage HTML Specific Configuration Variables - \contentspage QDoc Manual - \nextpage Example Manifest Files - - \title Supporting Derived Projects - - Some configuration variables allow you to use QDoc to support - Qt-based projects. They allow your project to contain links to the - online Qt documentation, which means that QDoc will be able to - create links to the class reference documentation, without any - explicit linking command. - - \target description-variable - \section1 description - - The description variable holds a short description of the - associated project. - - See also \l project. - - \target indexes-variable - \section1 indexes - - The \c indexes variable lists the index files that will be used to - generate references. - - For example. to make a derived Qt project contain links to the Qt - Reference documentation, you need to specify the associated index - file: - - \badcode - indexes = $QTDIR/doc/html/qt.index - \endcode - - See also \l project and \l url. - - \target project-variable - \section1 project - - The \c project variable provides a name for the project associated - with the \c .qdocconf file. - - The project's name is used to form a file name for the associated - project's \e index file. - - \badcode - project = QtCreator - \endcode - - This will cause an index file called \c qtcreator.index to be - created. - - See also \l description and \l indexes. - - \target url-variable - \section1 url - - The \c url variable holds the base URL for the reference - documentation associated with the current project. - - The URL is stored in the generated index file for the - project. When we use the index on its own, QDoc will use this as - the base URL when constructing links to classes, functions, and - other things listed in the index. - - \badcode - project = Qt - description = Qt Reference Documentation - url = http://doc.qt.io/qt-4.8/ - - ... - \endcode - - This makes sure that whenever \c qt.index is used to generate - references to for example Qt classes, the base URL is \c - http://doc.qt.io/qt-4.8/. - - See also \l indexes. - - \target howto - \section1 How to Support Derived Projects - - This feature makes use of the comprehensive indexes generated by - QDoc when it creates the Qt reference documentation. - - For example, \l qtgui.qdocconf (the configuration file for Qt) - contains the following variable definitions: - - \badcode - project = Qt - description = Qt Reference Documentation - url = http://doc.qt.io/qt-4.8/ - - ... - \endcode - - The \l project variable name is used to form a file name for the - index file; in this case the \c qt.index file is created. The \l - url is stored in the index file. Afterwards, QDoc will use this - as the base URL when constructing links to classes, functions, - and other things listed in the index. - -*/ - -/*! - \page 26-qdoc-configuration-example-manifest-files.html - \previouspage Supporting Derived Projects - \contentspage QDoc Manual - - \title Example Manifest Files - - QDoc generates XML files that contain information about all documented - examples and demos. These files, named \c {examples-manifest.xml} and - \c {demos-manifest.xml}, are used by Qt Creator to present a list of - examples in its welcome screen and to link to their documentation. - - \section1 Manifest XML Structure - - A manifest file has the following structure: - - \badcode - <?xml version="1.0" encoding="UTF-8"?> - <instructionals module="QtGui"> - <examples> - <example - name="Analog Clock Window Example" - docUrl="qthelp://org.qt-project.qtgui.502/qtgui/analogclock.html" - projectPath="gui/analogclock/analogclock.pro" - imageUrl="qthelp://org.qt-project.qtgui.502/qtgui/images/analogclock-window-example.png"> - <description><![CDATA[The Analog Clock Window example shows how - to draw the contents of a custom window.]]></description> - <tags>analog,clock,window</tags> - <fileToOpen>gui/analogclock/main.cpp</fileToOpen> - </example> - ... - </examples> - </instructionals> - \endcode - - Each \c {<example>} element contains information about a name, - description, the location of the project file and documentation, - as well as a list of tags associated with the example. - - \target metacontent - \section1 Manifest Meta Content - - It is possible to augment the manifest files with additional - meta-content - that is, extra attributes and tags for selected - examples, using the \c manifestmeta configuration command. - - One use case for meta-content is highlighting a number of prominent - examples. Another is improving search functionality by adding - relevant keywords as tags for a certain category of examples. - - The examples for which meta-content is applied to is specified using - one or more filters. Matching examples to filters is done based on - names, with each example name prefixed with a module name and a - slash. Simple wildcard matching is supported; by using \c {*} at the - end it's possible to match multiple examples with a single string. - - Example: - - \badcode - manifestmeta.filters = highlighted sql webkit global - - manifestmeta.highlighted.names = "QtGui/Analog Clock Window Example" \ - "QtWidgets/Analog Clock Example" - manifestmeta.highlighted.attributes = isHighlighted:true - - manifestmeta.sql.names = "QtSql/*" - manifestmeta.sql.tags = database,sql - - manifestmeta.webkit.names = "QtWebKitExamples/*" - manifestmeta.webkit.tags = webkit - - manifestmeta.global.names = * - manifestmeta.global.tags = qt5 - \endcode - - Above, an \c isHighlighted attribute is added to two examples. If - the attribute value is omitted, QDoc uses the string \c {true} by - default. Extra tags are added for Qt WebKit and Qt SQL examples, and - another tag is applied to all examples by using just \c {*} as the - match string. -*/ -/*! - \page 21-3-qt-dita-xml-output.html - \previouspage minimum.qdocconf - \contentspage QDoc Manual - \nextpage QA Pages - - \title Generating DITA XML Output - - QDoc can generate \l {http://dita.xml.org} {DITA XML output}. - - In your configuration file, set your \c {outputformats} variable - to \c {DITAXML}, and send the output to an appropriate directory: - - \badcode - outputdir = $QTDIR/doc/ditaxml - outputformats = DITAXML - \endcode - - And include these macros in your configuration file to prevent - QDoc from doing some escaping that doesn't validate in XML: - - \badcode - macro.aacute.DITAXML = "á" - macro.Aring.DITAXML = "Å" - macro.aring.DITAXML = "å" - macro.Auml.DITAXML = "Ä" - macro.br.DITAXML = " " - macro.BR.DITAXML = " " - macro.copyright.DITAXML = "©" - macro.eacute.DITAXML = "é" - macro.hr.DITAXML = " " - macro.iacute.DITAXML = "í" - macro.oslash.DITAXML = "ø" - macro.ouml.DITAXML = "ö" - macro.raisedaster.DITAXML = "<sup>*</sup>" - macro.rarrow.DITAXML = "→" - macro.reg.DITAXML = "<sup>®</sup>" - macro.uuml.DITAXML = "ü" - macro.mdash.DITAXML = "—" - macro.emptyspan.DITAXML = " " - \endcode - - You can also set default values for some of the tags in the DITA - \c {<prolog>} and \c {<metadata>} elements: - - \badcode - dita.metadata.default.author = Qt Development Frameworks - dita.metadata.default.permissions = all - dita.metadata.default.publisher = Qt Project - dita.metadata.default.copyryear = 2015 - dita.metadata.default.copyrholder = Qt Project - dita.metadata.default.audience = programmer - \endcode - - See the \l {meta-command} - {\\meta} command for more details on DITA metadata. - -*/ - - -/*! - \page 21-1-minimum-qdocconf.html - \previouspage qtgui.qdocconf - \contentspage QDoc Manual - \nextpage Generating DITA XML Output - - \title minimum.qdocconf - - \quotefile examples/minimum.qdocconf -*/ - -/*! - \page 21-2-qtgui-qdocconf.html - \previouspage Supporting Derived Projects - \contentspage QDoc Manual - \nextpage minimum.qdocconf - - \title qtgui.qdocconf - - \quotefile files/qtgui.qdocconf -*/ |