diff options
Diffstat (limited to 'src/widgets/doc/snippets/reading-selections')
6 files changed, 560 insertions, 0 deletions
diff --git a/src/widgets/doc/snippets/reading-selections/main.cpp b/src/widgets/doc/snippets/reading-selections/main.cpp new file mode 100644 index 0000000000..3356ffc8ab --- /dev/null +++ b/src/widgets/doc/snippets/reading-selections/main.cpp @@ -0,0 +1,59 @@ +/**************************************************************************** +** +** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/ +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/* + main.cpp + + A simple example that shows how selections can be used directly on a model. + It shows the result of some selections made using a table view. +*/ + +#include <QApplication> + +#include "window.h" + +int main(int argc, char *argv[]) +{ + QApplication app(argc, argv); + QMainWindow *window = new MainWindow; + window->show(); + window->resize(640, 480); + return app.exec(); +} diff --git a/src/widgets/doc/snippets/reading-selections/model.cpp b/src/widgets/doc/snippets/reading-selections/model.cpp new file mode 100644 index 0000000000..ca4b9f84dd --- /dev/null +++ b/src/widgets/doc/snippets/reading-selections/model.cpp @@ -0,0 +1,238 @@ +/**************************************************************************** +** +** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/ +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/* + model.cpp + + Provides a table model for use in various examples. +*/ + +#include <QtGui> + +#include "model.h" + +/*! + Constructs a table model with at least one row and one column. +*/ + +TableModel::TableModel(int rows, int columns, QObject *parent) + : QAbstractTableModel(parent) +{ + QStringList newList; + + for (int column = 0; column < qMax(1, columns); ++column) { + newList.append(""); + } + + for (int row = 0; row < qMax(1, rows); ++row) { + rowList.append(newList); + } +} + + +/*! + Returns the number of items in the row list as the number of rows + in the model. +*/ + +int TableModel::rowCount(const QModelIndex &/*parent*/) const +{ + return rowList.size(); +} + +/*! + Returns the number of items in the first list item as the number of + columns in the model. All rows should have the same number of columns. +*/ + +int TableModel::columnCount(const QModelIndex &/*parent*/) const +{ + return rowList[0].size(); +} + +/*! + Returns an appropriate value for the requested data. + If the view requests an invalid index, an invalid variant is returned. + Any valid index that corresponds to a string in the list causes that + string to be returned for the display role; otherwise an invalid variant + is returned. +*/ + +QVariant TableModel::data(const QModelIndex &index, int role) const +{ + if (!index.isValid()) + return QVariant(); + + if (role == Qt::DisplayRole) + return rowList[index.row()][index.column()]; + else + return QVariant(); +} + +/*! + Returns the appropriate header string depending on the orientation of + the header and the section. If anything other than the display role is + requested, we return an invalid variant. +*/ + +QVariant TableModel::headerData(int section, Qt::Orientation orientation, + int role) const +{ + if (role != Qt::DisplayRole) + return QVariant(); + + if (orientation == Qt::Horizontal) + return QString("Column %1").arg(section); + else + return QString("Row %1").arg(section); +} + +/*! + Returns an appropriate value for the item's flags. Valid items are + enabled, selectable, and editable. +*/ + +Qt::ItemFlags TableModel::flags(const QModelIndex &index) const +{ + if (!index.isValid()) + return Qt::ItemIsEnabled; + + return Qt::ItemIsEnabled | Qt::ItemIsSelectable; +} + +/*! + Changes an item in the model, but only if the following conditions + are met: + + * The index supplied is valid. + * The role associated with editing text is specified. + + The dataChanged() signal is emitted if the item is changed. +*/ + +bool TableModel::setData(const QModelIndex &index, + const QVariant &value, int role) +{ + if (!index.isValid() || role != Qt::EditRole) + return false; + + rowList[index.row()][index.column()] = value.toString(); + emit dataChanged(index, index); + return true; +} + +/*! + Inserts a number of rows into the model at the specified position. +*/ + +bool TableModel::insertRows(int position, int rows, const QModelIndex &parent) +{ + int columns = columnCount(); + beginInsertRows(parent, position, position + rows - 1); + + for (int row = 0; row < rows; ++row) { + QStringList items; + for (int column = 0; column < columns; ++column) + items.append(""); + rowList.insert(position, items); + } + + endInsertRows(); + return true; +} + +/*! + Inserts a number of columns into the model at the specified position. + Each entry in the list is extended in turn with the required number of + empty strings. +*/ + +bool TableModel::insertColumns(int position, int columns, + const QModelIndex &parent) +{ + int rows = rowCount(); + beginInsertColumns(parent, position, position + columns - 1); + + for (int row = 0; row < rows; ++row) { + for (int column = position; column < columns; ++column) { + rowList[row].insert(position, ""); + } + } + + endInsertColumns(); + return true; +} + +/*! + Removes a number of rows from the model at the specified position. +*/ + +bool TableModel::removeRows(int position, int rows, const QModelIndex &parent) +{ + beginRemoveRows(parent, position, position + rows - 1); + + for (int row = 0; row < rows; ++row) { + rowList.removeAt(position); + } + + endRemoveRows(); + return true; +} + +/*! + Removes a number of columns from the model at the specified position. + Each row is shortened by the number of columns specified. +*/ + +bool TableModel::removeColumns(int position, int columns, + const QModelIndex &parent) +{ + int rows = rowCount(); + beginRemoveColumns(parent, position, position + columns - 1); + + for (int row = 0; row < rows; ++row) { + for (int column = 0; column < columns; ++column) { + rowList[row].removeAt(position); + } + } + + endRemoveColumns(); + return true; +} diff --git a/src/widgets/doc/snippets/reading-selections/model.h b/src/widgets/doc/snippets/reading-selections/model.h new file mode 100644 index 0000000000..ef63e45ce0 --- /dev/null +++ b/src/widgets/doc/snippets/reading-selections/model.h @@ -0,0 +1,74 @@ +/**************************************************************************** +** +** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/ +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#ifndef MODEL_H +#define MODEL_H + +#include <QAbstractTableModel> +#include <QStringList> +#include <QVariant> + +class TableModel : public QAbstractTableModel +{ + Q_OBJECT + +public: + TableModel(int rows = 1, int columns = 1, QObject *parent = 0); + + int rowCount(const QModelIndex &parent = QModelIndex()) const; + int columnCount(const QModelIndex &parent = QModelIndex()) const; + QVariant data(const QModelIndex &index, int role) const; + QVariant headerData(int section, Qt::Orientation orientation, + int role = Qt::DisplayRole) const; + + Qt::ItemFlags flags(const QModelIndex &index) const; + bool setData(const QModelIndex &index, const QVariant &value, + int role = Qt::EditRole); + + bool insertRows(int position, int rows, const QModelIndex &parent = QModelIndex()); + bool insertColumns(int position, int columns, const QModelIndex &parent = QModelIndex()); + bool removeRows(int position, int rows, const QModelIndex &parent = QModelIndex()); + bool removeColumns(int position, int columns, const QModelIndex &parent = QModelIndex()); + +private: + QList<QStringList> rowList; +}; + +#endif diff --git a/src/widgets/doc/snippets/reading-selections/reading-selections.pro b/src/widgets/doc/snippets/reading-selections/reading-selections.pro new file mode 100644 index 0000000000..91ebd3e84f --- /dev/null +++ b/src/widgets/doc/snippets/reading-selections/reading-selections.pro @@ -0,0 +1,2 @@ +HEADERS += model.h window.h +SOURCES += main.cpp model.cpp window.cpp diff --git a/src/widgets/doc/snippets/reading-selections/window.cpp b/src/widgets/doc/snippets/reading-selections/window.cpp new file mode 100644 index 0000000000..dd9970374f --- /dev/null +++ b/src/widgets/doc/snippets/reading-selections/window.cpp @@ -0,0 +1,120 @@ +/**************************************************************************** +** +** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/ +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/* + window.cpp + + A minimal subclass of QTableView with slots to allow the selection model + to be monitored. +*/ + +#include <QAbstractItemModel> +#include <QItemSelection> +#include <QItemSelectionModel> +#include <QMenu> +#include <QMenuBar> +#include <QStatusBar> + +#include "model.h" +#include "window.h" + +MainWindow::MainWindow(QWidget *parent) + : QMainWindow(parent) +{ + setWindowTitle("Selected Items in a Table Model"); + + model = new TableModel(8, 4, this); + + table = new QTableView(this); + table->setModel(model); + + QMenu *actionMenu = new QMenu(tr("&Actions"), this); + QAction *fillAction = actionMenu->addAction(tr("&Fill Selection")); + QAction *clearAction = actionMenu->addAction(tr("&Clear Selection")); + QAction *selectAllAction = actionMenu->addAction(tr("&Select All")); + menuBar()->addMenu(actionMenu); + + connect(fillAction, SIGNAL(triggered()), this, SLOT(fillSelection())); + connect(clearAction, SIGNAL(triggered()), this, SLOT(clearSelection())); + connect(selectAllAction, SIGNAL(triggered()), this, SLOT(selectAll())); + + selectionModel = table->selectionModel(); + + statusBar(); + setCentralWidget(table); +} + +void MainWindow::fillSelection() +{ +//! [0] + QModelIndexList indexes = selectionModel->selectedIndexes(); + QModelIndex index; + + foreach(index, indexes) { + QString text = QString("(%1,%2)").arg(index.row()).arg(index.column()); + model->setData(index, text); + } +//! [0] +} + +void MainWindow::clearSelection() +{ + QModelIndexList indexes = selectionModel->selectedIndexes(); + QModelIndex index; + + foreach(index, indexes) + model->setData(index, ""); +} + +void MainWindow::selectAll() +{ +//! [1] + QModelIndex parent = QModelIndex(); +//! [1] //! [2] + QModelIndex topLeft = model->index(0, 0, parent); + QModelIndex bottomRight = model->index(model->rowCount(parent)-1, + model->columnCount(parent)-1, parent); +//! [2] + +//! [3] + QItemSelection selection(topLeft, bottomRight); + selectionModel->select(selection, QItemSelectionModel::Select); +//! [3] +} diff --git a/src/widgets/doc/snippets/reading-selections/window.h b/src/widgets/doc/snippets/reading-selections/window.h new file mode 100644 index 0000000000..6d2537c22d --- /dev/null +++ b/src/widgets/doc/snippets/reading-selections/window.h @@ -0,0 +1,67 @@ +/**************************************************************************** +** +** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/ +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#ifndef WINDOW_H +#define WINDOW_H + +#include <QItemSelection> +#include <QMainWindow> +#include <QAbstractItemModel> +#include <QWidget> +#include <QTableView> + +class MainWindow : public QMainWindow +{ + Q_OBJECT +public: + MainWindow(QWidget *parent = 0); + +private slots: + void fillSelection(); + void clearSelection(); + void selectAll(); + +private: + QAbstractItemModel *model; + QItemSelectionModel *selectionModel; + QTableView *table; +}; + +#endif |