diff options
Diffstat (limited to 'tests/auto/qitemmodel/tst_qitemmodel.cpp')
| -rw-r--r-- | tests/auto/qitemmodel/tst_qitemmodel.cpp | 1398 |
1 files changed, 1398 insertions, 0 deletions
diff --git a/tests/auto/qitemmodel/tst_qitemmodel.cpp b/tests/auto/qitemmodel/tst_qitemmodel.cpp new file mode 100644 index 0000000000..7e177bae9b --- /dev/null +++ b/tests/auto/qitemmodel/tst_qitemmodel.cpp @@ -0,0 +1,1398 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the test suite of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** If you have questions regarding the use of this file, please contact +** Nokia at qt-info@nokia.com. +** +** +** +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + + +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the test suite of the Qt Toolkit. +** +** $LICENSE$ +** +****************************************************************************/ + +#include <QtTest/QtTest> +#include <QtCore> +#include <qdebug.h> +#include "modelstotest.cpp" +#include <QMetaType> + +Q_DECLARE_METATYPE(QModelIndex) + +//TESTED_CLASS= +//TESTED_FILES=gui/itemviews/qstandarditemmodel.h gui/itemviews/qstandarditemmodel.cpp + +/*! + See modelstotest.cpp for instructions on how to have your model tested with these tests. + + Each test such as rowCount have a _data() function which populate the QTest data with + the tests specified by modelstotest.cpp and any extra data needed for that perticular test. + + setupWithNoTestData() fills the QTest data with just the tests and is used by most tests. + + There are some basic qDebug statements sprikled about that might be helpfull for fixing + your issues. + */ +class tst_QItemModel : public QObject +{ + Q_OBJECT + +public: + tst_QItemModel() {}; + virtual ~tst_QItemModel() {}; + +public slots: + void init(); + void cleanup(); + +private slots: + void nonDestructiveBasicTest_data(); + void nonDestructiveBasicTest(); + + void rowCount_data(); + void rowCount(); + void columnCount_data(); + void columnCount(); + + void hasIndex_data(); + void hasIndex(); + void index_data(); + void index(); + + void parent_data(); + void parent(); + + void data_data(); + void data(); + + void setData_data(); + void setData(); + + void setHeaderData_data(); + void setHeaderData(); + + void remove_data(); + void remove(); + + void insert_data(); + void insert(); + + void sort_data(); + void sort(); + +protected slots: + void slot_rowsAboutToRemove(const QModelIndex &parent); + void slot_rowsRemoved(const QModelIndex &parent); + void slot_columnsAboutToRemove(const QModelIndex &parent); + void slot_columnsRemoved(const QModelIndex &parent); + + void slot_rowsAboutToInserted(const QModelIndex &parent); + void slot_rowsInserted(const QModelIndex &parent); + void slot_columnsAboutToInserted(const QModelIndex &parent); + void slot_columnsInserted(const QModelIndex &parent); +private: + void setupWithNoTestData(); + QAbstractItemModel *currentModel; + ModelsToTest *testModels; + + // used by remove() + QPersistentModelIndex parentOfRemoved; + int afterAboutToRemoveRowCount; + int afterRemoveRowCount; + int afterAboutToRemoveColumnCount; + int afterRemoveColumnCount; + + // remove() recursive + bool removeRecursively; + + // used by insert() + QPersistentModelIndex parentOfInserted; + int afterAboutToInsertRowCount; + int afterInsertRowCount; + int afterAboutToInsertColumnCount; + int afterInsertColumnCount; + + // insert() recursive + bool insertRecursively; +}; + +void tst_QItemModel::init() +{ + testModels = new ModelsToTest(); + removeRecursively = false; + insertRecursively = false; +} + +void tst_QItemModel::cleanup() +{ + testModels->cleanupTestArea(currentModel); + delete testModels; + delete currentModel; + currentModel = 0; +} + +void tst_QItemModel::setupWithNoTestData() +{ + ModelsToTest modelsToTest; + QTest::addColumn<QString>("modelType"); + QTest::addColumn<bool>("readOnly"); + QTest::addColumn<bool>("isEmpty"); + for (int i = 0; i < modelsToTest.tests.size(); ++i) { + ModelsToTest::test t = modelsToTest.tests.at(i); + bool readOnly = (t.read == ModelsToTest::ReadOnly); + bool isEmpty = (t.contains == ModelsToTest::Empty); + QTest::newRow(t.modelType.toLatin1().data()) << t.modelType << readOnly << isEmpty; + } +} + +void tst_QItemModel::nonDestructiveBasicTest_data() +{ + setupWithNoTestData(); +} + +/*! + nonDestructiveBasicTest trys to call a number of the basic functions (not all) + to make sure the model doesn't segfault, testing the functions that makes sense. + */ +void tst_QItemModel::nonDestructiveBasicTest() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + QCOMPARE(currentModel->buddy(QModelIndex()), QModelIndex()); + currentModel->canFetchMore(QModelIndex()); + QVERIFY(currentModel->columnCount(QModelIndex()) >= 0); + QCOMPARE(currentModel->data(QModelIndex()), QVariant()); + currentModel->fetchMore(QModelIndex()); + Qt::ItemFlags flags = currentModel->flags(QModelIndex()); + QVERIFY(flags == Qt::ItemIsDropEnabled || flags == 0); + currentModel->hasChildren(QModelIndex()); + currentModel->hasIndex(0, 0); + currentModel->headerData(0, Qt::Horizontal); + currentModel->index(0,0), QModelIndex(); + currentModel->itemData(QModelIndex()); + QVariant cache; + currentModel->match(QModelIndex(), -1, cache); + currentModel->mimeTypes(); + QCOMPARE(currentModel->parent(QModelIndex()), QModelIndex()); + QVERIFY(currentModel->rowCount() >= 0); + QVariant variant; + currentModel->setData(QModelIndex(), variant, -1); + currentModel->setHeaderData(-1, Qt::Horizontal, QVariant()); + currentModel->setHeaderData(0, Qt::Horizontal, QVariant()); + currentModel->setHeaderData(currentModel->columnCount() + 100, Qt::Horizontal, QVariant()); + QMap<int, QVariant> roles; + currentModel->setItemData(QModelIndex(), roles); + currentModel->sibling(0,0,QModelIndex()); + currentModel->span(QModelIndex()); + currentModel->supportedDropActions(); + currentModel->revert(); + currentModel->submit(); +} + + +void tst_QItemModel::rowCount_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::rowCount() and hasChildren() + */ +void tst_QItemModel::rowCount() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + QFETCH(bool, isEmpty); + if (isEmpty) { + QCOMPARE(currentModel->rowCount(), 0); + QCOMPARE(currentModel->hasChildren(), false); + } + else { + QVERIFY(currentModel->rowCount() > 0); + QCOMPARE(currentModel->hasChildren(), true); + } + + // check top row + QModelIndex topIndex = currentModel->index(0, 0, QModelIndex()); + int rows = currentModel->rowCount(topIndex); + QVERIFY(rows >= 0); + if (rows > 0) + QCOMPARE(currentModel->hasChildren(topIndex), true); + else + QCOMPARE(currentModel->hasChildren(topIndex), false); + + QModelIndex secondLevelIndex = currentModel->index(0, 0, topIndex); + if (secondLevelIndex.isValid()) { // not the top level + // check a row count where parent is valid + rows = currentModel->rowCount(secondLevelIndex); + QVERIFY(rows >= 0); + if (rows > 0) + QCOMPARE(currentModel->hasChildren(secondLevelIndex), true); + else + QCOMPARE(currentModel->hasChildren(secondLevelIndex), false); + } + + // rowCount is tested more extensivly more later in checkChildren(), + // but this catches the big mistakes +} + +void tst_QItemModel::columnCount_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::columnCount() and hasChildren() + */ +void tst_QItemModel::columnCount() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + QFETCH(bool, isEmpty); + if (isEmpty) { + QCOMPARE(currentModel->hasChildren(), false); + } + else { + QVERIFY(currentModel->columnCount() > 0); + QCOMPARE(currentModel->hasChildren(), true); + } + + // check top row + QModelIndex topIndex = currentModel->index(0, 0, QModelIndex()); + int columns = currentModel->columnCount(topIndex); + + // check a row count where parent is valid + columns = currentModel->columnCount(currentModel->index(0, 0, topIndex)); + QVERIFY(columns >= 0); + + // columnCount is tested more extensivly more later in checkChildren(), + // but this catches the big mistakes +} + +void tst_QItemModel::hasIndex_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::hasIndex() + */ +void tst_QItemModel::hasIndex() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + // Make sure that invalid values returns an invalid index + QCOMPARE(currentModel->hasIndex(-2, -2), false); + QCOMPARE(currentModel->hasIndex(-2, 0), false); + QCOMPARE(currentModel->hasIndex(0, -2), false); + + int rows = currentModel->rowCount(); + int columns = currentModel->columnCount(); + + QCOMPARE(currentModel->hasIndex(rows, columns), false); + QCOMPARE(currentModel->hasIndex(rows+1, columns+1), false); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + QCOMPARE(currentModel->hasIndex(0,0), true); + + // hasIndex is tested more extensivly more later in checkChildren(), + // but this catches the big mistakes +} + +void tst_QItemModel::index_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::index() + */ +void tst_QItemModel::index() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + // Make sure that invalid values returns an invalid index + QCOMPARE(currentModel->index(-2, -2), QModelIndex()); + QCOMPARE(currentModel->index(-2, 0), QModelIndex()); + QCOMPARE(currentModel->index(0, -2), QModelIndex()); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + int rows = currentModel->rowCount(); + int columns = currentModel->columnCount(); + + // Catch off by one errors + QCOMPARE(currentModel->index(rows,columns), QModelIndex()); + QCOMPARE(currentModel->index(0,0).isValid(), true); + + // Make sure that the same index is always returned + QModelIndex a = currentModel->index(0,0); + QModelIndex b = currentModel->index(0,0); + QVERIFY(a == b); + + // index is tested more extensivly more later in checkChildren(), + // but this catches the big mistakes +} + + +void tst_QItemModel::parent_data() +{ + setupWithNoTestData(); +} + +/*! + A model that returns an index of parent X should also return X when asking + for the parent of the index. + + This recursive function does pretty extensive testing on the whole model in an + effort to catch edge cases. + + This function assumes that rowCount(), columnCount() and index() work. If they have + a bug it will point it out, but the above tests should have already found the basic bugs + because it is easier to figure out the problem in those tests then this one. + */ +void checkChildren(QAbstractItemModel *currentModel, const QModelIndex &parent, int currentDepth=0) +{ + QFETCH(bool, readOnly); + + if (currentModel->canFetchMore(parent)) + currentModel->fetchMore(parent); + + int rows = currentModel->rowCount(parent); + int columns = currentModel->columnCount(parent); + + QCOMPARE(rows > 0, (currentModel->hasChildren(parent))); + + // Some reasuring testing against rows(),columns(), and hasChildren() + QVERIFY(rows >= 0); + QVERIFY(columns >= 0); + if (rows > 0 || columns > 0) + QCOMPARE(currentModel->hasChildren(parent), true); + else + QCOMPARE(currentModel->hasChildren(parent), false); + + //qDebug() << "parent:" << currentModel->data(parent).toString() << "rows:" << rows + // << "columns:" << columns << "parent column:" << parent.column(); + + QCOMPARE(currentModel->hasIndex(rows+1, 0, parent), false); + for (int r = 0; r < rows; ++r) { + if (currentModel->canFetchMore(parent)) + currentModel->fetchMore(parent); + + QCOMPARE(currentModel->hasIndex(r, columns+1, parent), false); + for (int c = 0; c < columns; ++c) { + QCOMPARE(currentModel->hasIndex(r, c, parent), true); + QModelIndex index = currentModel->index(r, c, parent); + QCOMPARE(index.isValid(), true); + + if (!readOnly) + currentModel->setData(index, "I'm a little tea pot short and stout"); + QModelIndex modifiedIndex = currentModel->index(r, c, parent); + QCOMPARE(index, modifiedIndex); + + // Make sure we get the same index if we request it twice in a row + QModelIndex a = currentModel->index(r, c, parent); + QModelIndex b = currentModel->index(r, c, parent); + QVERIFY(a == b); + + // Some basic checking on the index that is returned + QVERIFY(index.model() == currentModel); + QCOMPARE(index.row(), r); + QCOMPARE(index.column(), c); + QCOMPARE(currentModel->data(index, Qt::DisplayRole).isValid(), true); + + // If the next test fails here is some somewhat useful debug you play with. + /* + if (currentModel->parent(index) != parent) { + qDebug() << r << c << currentDepth << currentModel->data(index).toString() + << currentModel->data(parent).toString(); + qDebug() << index << parent << currentModel->parent(index); + QTreeView view; + view.setModel(currentModel); + view.show(); + QTest::qWait(9000); + }*/ + QCOMPARE(currentModel->parent(index), parent); + + // recursivly go down + if (currentModel->hasChildren(index) && currentDepth < 5) { + //qDebug() << r << c << "has children" << currentModel->rowCount(index); + checkChildren(currentModel, index, ++currentDepth); + // Because this is recursive we will return at the first failure rather then + // reporting it over and over + if (QTest::currentTestFailed()) + return; + } + + // make sure that after testing the children that the index pointer doesn't change. + QModelIndex newerIndex = currentModel->index(r, c, parent); + QCOMPARE(index, newerIndex); + } + } +} + +/*! + Tests model's implimentation of QAbstractItemModel::parent() + */ +void tst_QItemModel::parent() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + // Make sure the model wont crash and will return an invalid QModelIndex + // when asked for the parent of an invalid index. + QCOMPARE(currentModel->parent(QModelIndex()), QModelIndex()); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + // Common error test #1, make sure that a top level index has a parent + // that is a invalid QModelIndex. You model + QModelIndex topIndex = currentModel->index(0, 0, QModelIndex()); + QCOMPARE(currentModel->parent(topIndex), QModelIndex()); + + // Common error test #2, make sure that a second level index has a parent + // that is the top level index. + if (currentModel->rowCount(topIndex) > 0) { + QModelIndex childIndex = currentModel->index(0, 0, topIndex); + QCOMPARE(currentModel->parent(childIndex), topIndex); + } + + // Common error test #3, the second colum has the same children + // as the first column in a row. + QModelIndex topIndex1 = currentModel->index(0, 1, QModelIndex()); + if (currentModel->rowCount(topIndex1) > 0) { + QModelIndex childIndex = currentModel->index(0, 0, topIndex); + QModelIndex childIndex1 = currentModel->index(0, 0, topIndex1); + QVERIFY(childIndex != childIndex1); + } + + // Full test, walk 10 levels deap through the model making sure that all + // parents's children correctly specify their parent + QModelIndex top = QModelIndex(); + checkChildren(currentModel, top); +} + + +void tst_QItemModel::data_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::data() + */ +void tst_QItemModel::data() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + // Invalid index should return an invalid qvariant + QVERIFY(!currentModel->data(QModelIndex()).isValid()); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + // A valid index should have a valid qvariant data + QVERIFY(currentModel->index(0,0).isValid()); + + // shouldn't be able to set data on an invalid index + QCOMPARE(currentModel->setData(QModelIndex(), "foo", Qt::DisplayRole), false); + + // General Purpose roles + QVariant variant = currentModel->data(currentModel->index(0,0), Qt::ToolTipRole); + if (variant.isValid()) { + QVERIFY(qVariantCanConvert<QString>(variant)); + } + variant = currentModel->data(currentModel->index(0,0), Qt::StatusTipRole); + if (variant.isValid()) { + QVERIFY(qVariantCanConvert<QString>(variant)); + } + variant = currentModel->data(currentModel->index(0,0), Qt::WhatsThisRole); + if (variant.isValid()) { + QVERIFY(qVariantCanConvert<QString>(variant)); + } + + variant = currentModel->data(currentModel->index(0,0), Qt::SizeHintRole); + if (variant.isValid()) { + QVERIFY(qVariantCanConvert<QSize>(variant)); + } + + + // Appearance roles + QVariant fontVariant = currentModel->data(currentModel->index(0,0), Qt::FontRole); + if (fontVariant.isValid()) { + QVERIFY(qVariantCanConvert<QFont>(fontVariant)); + } + + QVariant textAlignmentVariant = currentModel->data(currentModel->index(0,0), Qt::TextAlignmentRole); + if (textAlignmentVariant.isValid()) { + int alignment = textAlignmentVariant.toInt(); + QVERIFY(alignment == Qt::AlignLeft || + alignment == Qt::AlignRight || + alignment == Qt::AlignHCenter || + alignment == Qt::AlignJustify); + } + + QVariant colorVariant = currentModel->data(currentModel->index(0,0), Qt::BackgroundColorRole); + if (colorVariant.isValid()) { + QVERIFY(qVariantCanConvert<QColor>(colorVariant)); + } + + colorVariant = currentModel->data(currentModel->index(0,0), Qt::TextColorRole); + if (colorVariant.isValid()) { + QVERIFY(qVariantCanConvert<QColor>(colorVariant)); + } + + QVariant checkStateVariant = currentModel->data(currentModel->index(0,0), Qt::CheckStateRole); + if (checkStateVariant.isValid()) { + int state = checkStateVariant.toInt(); + QVERIFY(state == Qt::Unchecked || + state == Qt::PartiallyChecked || + state == Qt::Checked); + } +} + +void tst_QItemModel::setData_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::setData() + */ +void tst_QItemModel::setData() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + qRegisterMetaType<QModelIndex>("QModelIndex"); + QSignalSpy spy(currentModel, SIGNAL(dataChanged(const QModelIndex &, const QModelIndex &))); + QCOMPARE(currentModel->setData(QModelIndex(), QVariant()), false); + QCOMPARE(spy.count(), 0); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + QFETCH(bool, readOnly); + if (readOnly) + return; + + // Populate the test area so we can chage stuff. See: cleanup() + QModelIndex topIndex = testModels->populateTestArea(currentModel); + QVERIFY(currentModel->hasChildren(topIndex)); + QModelIndex index = currentModel->index(0, 0, topIndex); + QVERIFY(index.isValid()); + + spy.clear(); + QString text = "Index private pointers should always be the same"; + QCOMPARE(currentModel->setData(index, text, Qt::EditRole), true); + QCOMPARE(index.data(Qt::EditRole).toString(), text); + + // Changing the text shouldn't change the layout, parent, pointer etc. + QModelIndex changedIndex = currentModel->index(0, 0, topIndex); + QCOMPARE(changedIndex, index); + QCOMPARE(spy.count(), 1); +} + +void tst_QItemModel::setHeaderData_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::setHeaderData() + */ +void tst_QItemModel::setHeaderData() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + QCOMPARE(currentModel->setHeaderData(-1, Qt::Horizontal, QVariant()), false); + QCOMPARE(currentModel->setHeaderData(-1, Qt::Vertical, QVariant()), false); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + QFETCH(bool, readOnly); + if (readOnly) + return; + + // Populate the test area so we can change stuff. See: cleanup() + QModelIndex topIndex = testModels->populateTestArea(currentModel); + QVERIFY(currentModel->hasChildren(topIndex)); + QModelIndex index = currentModel->index(0, 0, topIndex); + QVERIFY(index.isValid()); + + qRegisterMetaType<Qt::Orientation>("Qt::Orientation"); + QSignalSpy spy(currentModel, SIGNAL(headerDataChanged( Qt::Orientation, int , int ))); + + QString text = "Index private pointers should always be the same"; + int signalCount = 0; + for (int i = 0; i < 4; ++i){ + if(currentModel->setHeaderData(i, Qt::Horizontal, text)) { + QCOMPARE(currentModel->headerData(i, Qt::Horizontal).toString(), text); + ++signalCount; + } + if(currentModel->setHeaderData(i, Qt::Vertical, text)) { + QCOMPARE(currentModel->headerData(i, Qt::Vertical).toString(), text); + ++signalCount; + } + } + QCOMPARE(spy.count(), signalCount); +} + +void tst_QItemModel::sort_data() +{ + setupWithNoTestData(); +} + +/*! + Tests model's implimentation of QAbstractItemModel::sort() + */ +void tst_QItemModel::sort() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + QFETCH(bool, isEmpty); + if (isEmpty) + return; + + // Populate the test area so we can chage stuff. See: cleanup() + QPersistentModelIndex topIndex = testModels->populateTestArea(currentModel); + QVERIFY(currentModel->hasChildren(topIndex)); + QModelIndex index = currentModel->index(0, 0, topIndex); + QVERIFY(index.isValid()); + QSignalSpy spy(currentModel, SIGNAL(layoutChanged())); + for (int i=-1; i < 10; ++i){ + currentModel->sort(i); + if (index != currentModel->index(0, 0, topIndex)){ + QVERIFY(spy.count() > 0); + index = currentModel->index(0, 0, topIndex); + spy.clear(); + } + } + currentModel->sort(99999); +} + +/*! + Tests model's implimentation of QAbstractItemModel::removeRow() and QAbstractItemModel::removeColumn() + */ +#define START 0 +#define MIDDLE 6 +#define END -1 +#define MANY 9 +#define ALL -1 +#define NOSIGNALS 0 +#define DEFAULTCOUNT 1 +#define DNS 1 // DefaultNumberOfSignals +#define RECURSIVE true +#define SUCCESS true +#define FAIL false +void tst_QItemModel::remove_data() +{ + ModelsToTest modelsToTest; + QTest::addColumn<QString>("modelType"); + QTest::addColumn<bool>("readOnly"); + QTest::addColumn<bool>("isEmpty"); + + QTest::addColumn<int>("start"); + QTest::addColumn<int>("count"); + + QTest::addColumn<int>("numberOfRowsAboutToBeRemovedSignals"); + QTest::addColumn<int>("numberOfColumnsAboutToBeRemovedSignals"); + QTest::addColumn<int>("numberOfRowsRemovedSignals"); + QTest::addColumn<int>("numberOfColumnsRemovedSignals"); + + QTest::addColumn<bool>("recursive"); + QTest::addColumn<int>("recursiveRow"); + QTest::addColumn<int>("recursiveCount"); + + QTest::addColumn<bool>("shouldSucceed"); + +#define makeTestRow(testName, start, count, sar, srr, sac, src, r, rr, rc, s) \ + QTest::newRow((t.modelType + testName).toLatin1().data()) << t.modelType << readOnly << isEmpty << \ + start << count << \ + sar << srr << sac << src << \ + r << rr << rc << \ + s; + + for (int i = 0; i < modelsToTest.tests.size(); ++i) { + ModelsToTest::test t = modelsToTest.tests.at(i); + QString name = t.modelType; + bool readOnly = (t.read == ModelsToTest::ReadOnly); + bool isEmpty = (t.contains == ModelsToTest::Empty); + + // half these + makeTestRow(":one at the start", START, DEFAULTCOUNT, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":one at the middle", MIDDLE, DEFAULTCOUNT, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":one at the end", END, DEFAULTCOUNT, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + + makeTestRow(":many at the start", START, MANY, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":many at the middle", MIDDLE, MANY, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":many at the end", END, MANY, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + + makeTestRow(":remove all", START, ALL, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + + makeTestRow(":none at the start", START, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":none at the middle", MIDDLE, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":none at the end", END, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + + makeTestRow(":invalid start, valid count", -99, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", 9999, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", -99, 1, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", 9999, 1, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", -99, MANY, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", 9999, MANY, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + + makeTestRow(":valid start, invalid count", START, -2, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", MIDDLE, -2, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", END, -2, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", START, 9999, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", MIDDLE, 9999, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", END, 9999, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + + // Recursive remove's might assert, havn't decided yet... + //makeTestRow(":one at the start recursivly", START, DEFAULTCOUNT, 2, DNS, 2, DNS, RECURSIVE, START, DEFAULTCOUNT, FAIL); + //makeTestRow(":one at the middle recursivly", MIDDLE, DEFAULTCOUNT, 2, DNS, 2, DNS, RECURSIVE, START, DEFAULTCOUNT, SUCCESS); + //makeTestRow(":one at the end recursivly", END, DEFAULTCOUNT, 2, DNS, 2, DNS, RECURSIVE, START, DEFAULTCOUNT, SUCCESS); + } +} + +void tst_QItemModel::remove() +{ + QFETCH(QString, modelType); + + currentModel = testModels->createModel(modelType); + + QFETCH(bool, readOnly); + if (readOnly) + return; + + QFETCH(int, start); + QFETCH(int, count); + + QFETCH(bool, recursive); + removeRecursively = recursive; + +/*! + Removes count number of rows starting at start + if count is -1 it removes all rows + if start is -1 then it starts at the last row - count + */ + QFETCH(bool, shouldSucceed); + + // Populate the test area so we can remove something. See: cleanup() + // parentOfRemoved is stored so that the slots can make sure parentOfRemoved is the index that is emited. + parentOfRemoved = testModels->populateTestArea(currentModel); + + if (count == -1) + count = currentModel->rowCount(parentOfRemoved); + if (start == -1) + start = currentModel->rowCount(parentOfRemoved)-count; + + if (currentModel->rowCount(parentOfRemoved) == 0 || + currentModel->columnCount(parentOfRemoved) == 0) { + qWarning() << "model test area doesn't have any rows or columns, can't fully test remove(). Skipping"; + return; + } + + //qDebug() << "remove start:" << start << "count:" << count << "rowCount:" << currentModel->rowCount(parentOfRemoved); + + // When a row or column is removed there should be two signals. + // Watch to make sure they are emited and get the row/column count when they do get emited by connecting them to a slot + qRegisterMetaType<QModelIndex>("QModelIndex"); + QSignalSpy columnsAboutToBeRemovedSpy(currentModel, SIGNAL(columnsAboutToBeRemoved( const QModelIndex &, int , int ))); + QSignalSpy rowsAboutToBeRemovedSpy(currentModel, SIGNAL(rowsAboutToBeRemoved( const QModelIndex &, int , int ))); + QSignalSpy columnsRemovedSpy(currentModel, SIGNAL(columnsRemoved( const QModelIndex &, int, int ))); + QSignalSpy rowsRemovedSpy(currentModel, SIGNAL(rowsRemoved( const QModelIndex &, int, int ))); + QSignalSpy modelResetSpy(currentModel, SIGNAL(modelReset())); + QSignalSpy modelLayoutChangedSpy(currentModel, SIGNAL(layoutChanged())); + + QFETCH(int, numberOfRowsAboutToBeRemovedSignals); + QFETCH(int, numberOfColumnsAboutToBeRemovedSignals); + QFETCH(int, numberOfRowsRemovedSignals); + QFETCH(int, numberOfColumnsRemovedSignals); + + // + // test removeRow() + // + connect(currentModel, SIGNAL(rowsAboutToBeRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_rowsAboutToRemove(const QModelIndex &))); + connect(currentModel, SIGNAL(rowsRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_rowsRemoved(const QModelIndex &))); + int beforeRemoveRowCount = currentModel->rowCount(parentOfRemoved); + QPersistentModelIndex dyingIndex = currentModel->index(start + count + 1, 0, parentOfRemoved); + QCOMPARE(currentModel->removeRows(start, count, parentOfRemoved), shouldSucceed); + currentModel->submit(); + if (shouldSucceed && dyingIndex.isValid()) + QCOMPARE(dyingIndex.row(), start + 1); + + if (rowsAboutToBeRemovedSpy.count() > 0){ + QList<QVariant> arguments = rowsAboutToBeRemovedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfRemoved == parent); + } + + if (rowsRemovedSpy.count() > 0){ + QList<QVariant> arguments = rowsRemovedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfRemoved == parent); + } + + // Only the row signals should have been emited + if (modelResetSpy.count() >= 1 || modelLayoutChangedSpy.count() >=1 ){ + QCOMPARE(columnsAboutToBeRemovedSpy.count(), 0); + QCOMPARE(rowsAboutToBeRemovedSpy.count(), 0); + QCOMPARE(columnsRemovedSpy.count(), 0); + QCOMPARE(rowsRemovedSpy.count(), 0); + } + else { + QCOMPARE(columnsAboutToBeRemovedSpy.count(), 0); + QCOMPARE(rowsAboutToBeRemovedSpy.count(), numberOfRowsAboutToBeRemovedSignals); + QCOMPARE(columnsRemovedSpy.count(), 0); + QCOMPARE(rowsRemovedSpy.count(), numberOfRowsRemovedSignals); + } + + // The row count should only change *after* rowsAboutToBeRemoved has been emited + //qDebug() << beforeRemoveRowCount << afterAboutToRemoveRowCount << afterRemoveRowCount << currentModel->rowCount(parentOfRemoved); + if (shouldSucceed) { + if (modelResetSpy.count() == 0 && modelLayoutChangedSpy.count() == 0){ + QCOMPARE(afterAboutToRemoveRowCount, beforeRemoveRowCount); + QCOMPARE(afterRemoveRowCount, beforeRemoveRowCount-count-(numberOfRowsRemovedSignals-1)); + } + if (modelResetSpy.count() == 0 ) + QCOMPARE(currentModel->rowCount(parentOfRemoved), beforeRemoveRowCount-count-(numberOfRowsRemovedSignals-1)); + } + else { + if (recursive) + QCOMPARE(currentModel->rowCount(parentOfRemoved), beforeRemoveRowCount-1); + else + QCOMPARE(currentModel->rowCount(parentOfRemoved), beforeRemoveRowCount); + + } + disconnect(currentModel, SIGNAL(rowsAboutToBeRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_rowsAboutToRemove(const QModelIndex &))); + disconnect(currentModel, SIGNAL(rowsRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_rowsRemoved(const QModelIndex &))); + modelResetSpy.clear(); + QCOMPARE(modelResetSpy.count(), 0); + + // + // Test remove column + // + connect(currentModel, SIGNAL(columnsAboutToBeRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_columnsAboutToRemove(const QModelIndex &))); + connect(currentModel, SIGNAL(columnsRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_columnsRemoved(const QModelIndex &))); + int beforeRemoveColumnCount = currentModel->columnCount(parentOfRemoved); + + // Some models don't let you remove the column, only row + if (currentModel->removeColumns(start, count, parentOfRemoved)) { + currentModel->submit(); + // Didn't reset the rows, so they should still be at the same value + if (modelResetSpy.count() >= 1 || modelLayoutChangedSpy.count() >= 1){ + QCOMPARE(columnsAboutToBeRemovedSpy.count(), 0); + //QCOMPARE(rowsAboutToBeRemovedSpy.count(), numberOfRowsAboutToBeRemovedSignals); + QCOMPARE(columnsRemovedSpy.count(), 0); + //QCOMPARE(rowsRemovedSpy.count(), numberOfRowsRemovedSignals); + } + else { + QCOMPARE(columnsAboutToBeRemovedSpy.count(), numberOfColumnsAboutToBeRemovedSignals); + QCOMPARE(rowsAboutToBeRemovedSpy.count(), numberOfRowsAboutToBeRemovedSignals); + QCOMPARE(columnsRemovedSpy.count(), numberOfColumnsRemovedSignals); + QCOMPARE(rowsRemovedSpy.count(), numberOfRowsRemovedSignals); + } + + // The column count should only change *after* rowsAboutToBeRemoved has been emited + if (shouldSucceed) { + if (modelResetSpy.count() == 0 && modelLayoutChangedSpy.count() == 0){ + QCOMPARE(afterAboutToRemoveColumnCount, beforeRemoveColumnCount); + QCOMPARE(afterRemoveColumnCount, beforeRemoveColumnCount-count-(numberOfColumnsRemovedSignals-1)); + } + if (modelResetSpy.count() == 0) + QCOMPARE(currentModel->columnCount(parentOfRemoved), beforeRemoveColumnCount-count-(numberOfColumnsRemovedSignals-1)); + } + else + QCOMPARE(currentModel->rowCount(parentOfRemoved), beforeRemoveRowCount); + } + disconnect(currentModel, SIGNAL(columnsAboutToBeRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_columnsAboutToRemove(const QModelIndex &))); + disconnect(currentModel, SIGNAL(columnsRemoved( const QModelIndex &, int , int )), + this, SLOT(slot_columnsRemoved(const QModelIndex &))); + + if (columnsAboutToBeRemovedSpy.count() > 0){ + QList<QVariant> arguments = columnsAboutToBeRemovedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfRemoved == parent); + } + + if (columnsRemovedSpy.count() > 0){ + QList<QVariant> arguments = columnsRemovedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfRemoved == parent); + } + + // Cleanup the test area because remove::() is called multiple times in a test + testModels->cleanupTestArea(currentModel); +} + +/*! + Developers like to use the slots to then *do* something on the model so it needs to be + in a working state. + */ +void verifyState(QAbstractItemModel *currentModel) { + // Make sure the model isn't confused right now and still knows what is root + if (currentModel->hasChildren()) { + QCOMPARE(currentModel->hasIndex(0, 0), true); + QModelIndex index = currentModel->index(0,0); + QCOMPARE(index.isValid(), true); + QCOMPARE(currentModel->parent(index).isValid(), false); + } else { + QModelIndex index = currentModel->index(0,0); + QCOMPARE(index.isValid(), false); + } +} + +void tst_QItemModel::slot_rowsAboutToRemove(const QModelIndex &parent) +{ + QVERIFY(parentOfRemoved == parent); + //qDebug() << "slot_rowsAboutToRemove" << currentModel->rowCount(parent); + afterAboutToRemoveRowCount = currentModel->rowCount(parent); + // hasChildren() should still work + if (afterAboutToRemoveRowCount > 0) + QCOMPARE(currentModel->hasChildren(parent), true); + else + QCOMPARE(currentModel->hasChildren(parent), false); + + verifyState(currentModel); + + // This does happen + if (removeRecursively) { + QFETCH(int, recursiveRow); + QFETCH(int, recursiveCount); + //qDebug() << recursiveRow << recursiveCount; + removeRecursively = false; + QCOMPARE(currentModel->removeRows(recursiveRow, recursiveCount, parent), true); + } +} + +void tst_QItemModel::slot_rowsRemoved(const QModelIndex &parent) +{ + QVERIFY(parentOfRemoved == parent); + //qDebug() << "slot_rowsRemoved" << currentModel->rowCount(parent); + afterRemoveRowCount = currentModel->rowCount(parent); + if (afterRemoveRowCount > 0) + QCOMPARE(currentModel->hasChildren(parent), true); + else + QCOMPARE(currentModel->hasChildren(parent), false); + + verifyState(currentModel); +} + +void tst_QItemModel::slot_columnsAboutToRemove(const QModelIndex &parent) +{ + QVERIFY(parentOfRemoved == parent); + afterAboutToRemoveColumnCount = currentModel->columnCount(parent); + // hasChildren() should still work + if (afterAboutToRemoveColumnCount > 0 && currentModel->rowCount(parent) > 0) + QCOMPARE(currentModel->hasChildren(parent), true); + else + QCOMPARE(currentModel->hasChildren(parent), false); + + verifyState(currentModel); +} + +void tst_QItemModel::slot_columnsRemoved(const QModelIndex &parent) +{ + QVERIFY(parentOfRemoved == parent); + afterRemoveColumnCount = currentModel->columnCount(parent); + if (afterRemoveColumnCount > 0) + QCOMPARE(currentModel->hasChildren(parent), true); + else + QCOMPARE(currentModel->hasChildren(parent), false); + + verifyState(currentModel); +} + +/*! + Tests the model's insertRow/Column() + */ +void tst_QItemModel::insert_data() +{ + ModelsToTest modelsToTest; + QTest::addColumn<QString>("modelType"); + QTest::addColumn<bool>("readOnly"); + QTest::addColumn<bool>("isEmpty"); + + QTest::addColumn<int>("start"); + QTest::addColumn<int>("count"); + + QTest::addColumn<int>("numberOfRowsAboutToBeInsertedSignals"); + QTest::addColumn<int>("numberOfColumnsAboutToBeInsertedSignals"); + QTest::addColumn<int>("numberOfRowsInsertedSignals"); + QTest::addColumn<int>("numberOfColumnsInsertedSignals"); + + QTest::addColumn<bool>("recursive"); + QTest::addColumn<int>("recursiveRow"); + QTest::addColumn<int>("recursiveCount"); + + QTest::addColumn<bool>("shouldSucceed"); + +#define makeTestRow(testName, start, count, sar, srr, sac, src, r, rr, rc, s) \ + QTest::newRow((t.modelType + testName).toLatin1().data()) << t.modelType << readOnly << isEmpty << \ + start << count << \ + sar << srr << sac << src << \ + r << rr << rc << \ + s; + + for (int i = 0; i < modelsToTest.tests.size(); ++i) { + ModelsToTest::test t = modelsToTest.tests.at(i); + QString name = t.modelType; + bool readOnly = (t.read == ModelsToTest::ReadOnly); + bool isEmpty = (t.contains == ModelsToTest::Empty); + + // half these + makeTestRow(":one at the start", START, DEFAULTCOUNT, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":one at the middle", MIDDLE, DEFAULTCOUNT, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":one at the end", END, DEFAULTCOUNT, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + + makeTestRow(":many at the start", START, MANY, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":many at the middle", MIDDLE, MANY, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + makeTestRow(":many at the end", END, MANY, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + + makeTestRow(":add row count", START, ALL, DNS, DNS, DNS, DNS, !RECURSIVE, 0, 0, SUCCESS); + + makeTestRow(":none at the start", START, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":none at the middle", MIDDLE, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":none at the end", END, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + + makeTestRow(":invalid start, valid count", -99, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", 9999, 0, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", -99, 1, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", 9999, 1, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", -99, MANY, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":invalid start, valid count", 9999, MANY, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + + makeTestRow(":valid start, invalid count", START, -2, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", MIDDLE, -2, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + makeTestRow(":valid start, invalid count", END, -2, NOSIGNALS, NOSIGNALS, NOSIGNALS, NOSIGNALS, !RECURSIVE, 0, 0, FAIL); + + // Recursive insert's might assert, havn't decided yet... + //makeTestRow(":one at the start recursivly", START, DEFAULTCOUNT, 2, DNS, 2, DNS, RECURSIVE, START, DEFAULTCOUNT, FAIL); + //makeTestRow(":one at the middle recursivly", MIDDLE, DEFAULTCOUNT, 2, DNS, 2, DNS, RECURSIVE, START, DEFAULTCOUNT, SUCCESS); + //makeTestRow(":one at the end recursivly", END, DEFAULTCOUNT, 2, DNS, 2, DNS, RECURSIVE, START, DEFAULTCOUNT, SUCCESS); + } +} + +void tst_QItemModel::insert() +{ + QFETCH(QString, modelType); + currentModel = testModels->createModel(modelType); + + QFETCH(bool, readOnly); + if (readOnly) + return; + + QFETCH(int, start); + QFETCH(int, count); + + QFETCH(bool, recursive); + insertRecursively = recursive; + +/*! + Inserts count number of rows starting at start + if count is -1 it inserts all rows + if start is -1 then it starts at the last row - count + */ + QFETCH(bool, shouldSucceed); + + // Populate the test area so we can insert something. See: cleanup() + // parentOfInserted is stored so that the slots can make sure parentOfInserted is the index that is emited. + parentOfInserted = testModels->populateTestArea(currentModel); + + if (count == -1) + count = currentModel->rowCount(parentOfInserted); + if (start == -1) + start = currentModel->rowCount(parentOfInserted)-count; + + if (currentModel->rowCount(parentOfInserted) == 0 || + currentModel->columnCount(parentOfInserted) == 0) { + qWarning() << "model test area doesn't have any rows, can't fully test insert(). Skipping"; + return; + } + + //qDebug() << "insert start:" << start << "count:" << count << "rowCount:" << currentModel->rowCount(parentOfInserted); + + // When a row or column is inserted there should be two signals. + // Watch to make sure they are emited and get the row/column count when they do get emited by connecting them to a slot + qRegisterMetaType<QModelIndex>("QModelIndex"); + QSignalSpy columnsAboutToBeInsertedSpy(currentModel, SIGNAL(columnsAboutToBeInserted( const QModelIndex &, int , int ))); + QSignalSpy rowsAboutToBeInsertedSpy(currentModel, SIGNAL(rowsAboutToBeInserted( const QModelIndex &, int , int ))); + QSignalSpy columnsInsertedSpy(currentModel, SIGNAL(columnsInserted( const QModelIndex &, int, int ))); + QSignalSpy rowsInsertedSpy(currentModel, SIGNAL(rowsInserted( const QModelIndex &, int, int ))); + QSignalSpy modelResetSpy(currentModel, SIGNAL(modelReset())); + QSignalSpy modelLayoutChangedSpy(currentModel, SIGNAL(layoutChanged())); + + QFETCH(int, numberOfRowsAboutToBeInsertedSignals); + QFETCH(int, numberOfColumnsAboutToBeInsertedSignals); + QFETCH(int, numberOfRowsInsertedSignals); + QFETCH(int, numberOfColumnsInsertedSignals); + + // + // test insertRow() + // + connect(currentModel, SIGNAL(rowsAboutToBeInserted( const QModelIndex &, int , int )), + this, SLOT(slot_rowsAboutToInserted(const QModelIndex &))); + connect(currentModel, SIGNAL(rowsInserted( const QModelIndex &, int , int )), + this, SLOT(slot_rowsInserted(const QModelIndex &))); + int beforeInsertRowCount = currentModel->rowCount(parentOfInserted); + QCOMPARE(currentModel->insertRows(start, count, parentOfInserted), shouldSucceed); + currentModel->submit(); + + if (rowsAboutToBeInsertedSpy.count() > 0){ + QList<QVariant> arguments = rowsAboutToBeInsertedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfInserted == parent); + } + + if (rowsInsertedSpy.count() > 0){ + QList<QVariant> arguments = rowsInsertedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfInserted == parent); + } + + // Only the row signals should have been emited + if (modelResetSpy.count() >= 1 || modelLayoutChangedSpy.count() >= 1) { + QCOMPARE(columnsAboutToBeInsertedSpy.count(), 0); + QCOMPARE(rowsAboutToBeInsertedSpy.count(), 0); + QCOMPARE(columnsInsertedSpy.count(), 0); + QCOMPARE(rowsInsertedSpy.count(), 0); + } + else { + QCOMPARE(columnsAboutToBeInsertedSpy.count(), 0); + QCOMPARE(rowsAboutToBeInsertedSpy.count(), numberOfRowsAboutToBeInsertedSignals); + QCOMPARE(columnsInsertedSpy.count(), 0); + QCOMPARE(rowsInsertedSpy.count(), numberOfRowsInsertedSignals); + } + // The row count should only change *after* rowsAboutToBeInserted has been emited + //qDebug() << beforeInsertRowCount << afterAboutToInsertRowCount << afterInsertRowCount << currentModel->rowCount(parentOfInserted); + if (shouldSucceed) { + if (modelResetSpy.count() == 0 && modelLayoutChangedSpy.count() == 0) { + QCOMPARE(afterAboutToInsertRowCount, beforeInsertRowCount); + QCOMPARE(afterInsertRowCount, beforeInsertRowCount+count+(numberOfRowsInsertedSignals-1)); + } + if (modelResetSpy.count() == 0) + QCOMPARE(currentModel->rowCount(parentOfInserted), beforeInsertRowCount+count+(numberOfRowsInsertedSignals-1)); + } + else { + if (recursive) + QCOMPARE(currentModel->rowCount(parentOfInserted), beforeInsertRowCount+1); + else + QCOMPARE(currentModel->rowCount(parentOfInserted), beforeInsertRowCount); + + } + disconnect(currentModel, SIGNAL(rowsAboutToBeInserted( const QModelIndex &, int , int )), + this, SLOT(slot_rowsAboutToInserted(const QModelIndex &))); + disconnect(currentModel, SIGNAL(rowsInserted( const QModelIndex &, int , int )), + this, SLOT(slot_rowsInserted(const QModelIndex &))); + modelResetSpy.clear(); + + // + // Test insertColumn() + // + connect(currentModel, SIGNAL(columnsAboutToBeInserted( const QModelIndex &, int , int )), + this, SLOT(slot_columnsAboutToInserted(const QModelIndex &))); + connect(currentModel, SIGNAL(columnsInserted( const QModelIndex &, int , int )), + this, SLOT(slot_columnsInserted(const QModelIndex &))); + int beforeInsertColumnCount = currentModel->columnCount(parentOfInserted); + + // Some models don't let you insert the column, only row + if (currentModel->insertColumns(start, count, parentOfInserted)) { + currentModel->submit(); + if (modelResetSpy.count() >= 1 || modelLayoutChangedSpy.count() >= 1) { + // Didn't reset the rows, so they should still be at the same value + QCOMPARE(columnsAboutToBeInsertedSpy.count(), 0); + //QCOMPARE(rowsAboutToBeInsertedSpy.count(), numberOfRowsAboutToBeInsertedSignals); + QCOMPARE(columnsInsertedSpy.count(), 0); + //QCOMPARE(rowsInsertedSpy.count(), numberOfRowsInsertedSignals); + } + else { + // Didn't reset the rows, so they should still be at the same value + QCOMPARE(columnsAboutToBeInsertedSpy.count(), numberOfColumnsAboutToBeInsertedSignals); + QCOMPARE(rowsAboutToBeInsertedSpy.count(), numberOfRowsAboutToBeInsertedSignals); + QCOMPARE(columnsInsertedSpy.count(), numberOfColumnsInsertedSignals); + QCOMPARE(rowsInsertedSpy.count(), numberOfRowsInsertedSignals); + } + // The column count should only change *after* rowsAboutToBeInserted has been emited + if (shouldSucceed) { + if (modelResetSpy.count() == 0 && modelLayoutChangedSpy.count() == 0) { + QCOMPARE(afterAboutToInsertColumnCount, beforeInsertColumnCount); + QCOMPARE(afterInsertColumnCount, beforeInsertColumnCount+count+(numberOfColumnsInsertedSignals-1)); + } + if (modelResetSpy.count() == 0) + QCOMPARE(currentModel->columnCount(parentOfInserted), beforeInsertColumnCount+count+(numberOfColumnsInsertedSignals-1)); + } + else + QCOMPARE(currentModel->rowCount(parentOfInserted), beforeInsertRowCount); + } + disconnect(currentModel, SIGNAL(columnsAboutToBeInserted( const QModelIndex &, int , int )), + this, SLOT(slot_columnsAboutToInserted(const QModelIndex &))); + disconnect(currentModel, SIGNAL(columnsInserted( const QModelIndex &, int , int )), + this, SLOT(slot_columnsInserted(const QModelIndex &))); + + if (columnsAboutToBeInsertedSpy.count() > 0){ + QList<QVariant> arguments = columnsAboutToBeInsertedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfInserted == parent); + } + + if (columnsInsertedSpy.count() > 0){ + QList<QVariant> arguments = columnsInsertedSpy.at(0); + QModelIndex parent = (qvariant_cast<QModelIndex>(arguments.at(0))); + int first = arguments.at(1).toInt(); + int last = arguments.at(2).toInt(); + QCOMPARE(first, start); + QCOMPARE(last, start + count - 1); + QVERIFY(parentOfInserted == parent); + } + + // Cleanup the test area because insert::() is called multiple times in a test + testModels->cleanupTestArea(currentModel); +} + +void tst_QItemModel::slot_rowsAboutToInserted(const QModelIndex &parent) +{ + QVERIFY(parentOfInserted == parent); + //qDebug() << "slot_rowsAboutToInsert" << currentModel->rowCount(parent); + afterAboutToInsertRowCount = currentModel->rowCount(parent); + bool hasChildren = currentModel->hasChildren(parent); + bool hasDimensions = currentModel->columnCount(parent) > 0 && currentModel->rowCount(parent) > 0; + QCOMPARE(hasChildren, hasDimensions); + verifyState(currentModel); + + // This does happen + if (insertRecursively) { + QFETCH(int, recursiveRow); + QFETCH(int, recursiveCount); + //qDebug() << recursiveRow << recursiveCount; + insertRecursively = false; + QCOMPARE(currentModel->insertRows(recursiveRow, recursiveCount, parent), true); + } +} + +void tst_QItemModel::slot_rowsInserted(const QModelIndex &parent) +{ + QVERIFY(parentOfInserted == parent); + afterInsertRowCount = currentModel->rowCount(parent); + bool hasChildren = currentModel->hasChildren(parent); + bool hasDimensions = currentModel->columnCount(parent) > 0 && currentModel->rowCount(parent) > 0; + QCOMPARE(hasChildren, hasDimensions); + verifyState(currentModel); +} + +void tst_QItemModel::slot_columnsAboutToInserted(const QModelIndex &parent) +{ + QVERIFY(parentOfInserted == parent); + afterAboutToInsertColumnCount = currentModel->columnCount(parent); + bool hasChildren = currentModel->hasChildren(parent); + bool hasDimensions = currentModel->columnCount(parent) > 0 && currentModel->rowCount(parent) > 0; + QCOMPARE(hasChildren, hasDimensions); + verifyState(currentModel); +} + +void tst_QItemModel::slot_columnsInserted(const QModelIndex &parent) +{ + QVERIFY(parentOfInserted == parent); + afterInsertColumnCount = currentModel->columnCount(parent); + bool hasChildren = currentModel->hasChildren(parent); + bool hasDimensions = currentModel->columnCount(parent) > 0 && currentModel->rowCount(parent) > 0; + QCOMPARE(hasChildren, hasDimensions); + verifyState(currentModel); +} + +QTEST_MAIN(tst_QItemModel) +#include "tst_qitemmodel.moc" |