summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Fix warning about missing enumeration value.Friedemann Kleint2013-01-151-0/+2
| | | | | Change-Id: If97a325d056282a033cdb4c6e5bdc79eb400c525 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
* Fix compilation of Qt Concurrent with gcc 4.3Thiago Macieira2013-01-151-1/+1
| | | | | | | | | | | GCC 4.3 had support for decltype but not the new function syntax (which we call "auto function" for short). That meant the code did not compile. qtconcurrentrun.h:105: error: expected initializer before ‘->’ token Task-number: QTBUG-28984 Change-Id: I792276ec59c4f6e73f6137c517636e70c71ed849 Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
* configure: disable GTK auto-detection on MacJ-P Nurmi2013-01-141-0/+5
| | | | | | | | Task-number: QTBUG-28769 Change-Id: I2f05fdf530cde8ae7ed1470a99acade6267e19e6 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com> Reviewed-by: Andy Shaw <andy.shaw@digia.com>
* Fix malloc errors from legacy realpath on Mac OSX.Jeremy Nicholl2013-01-141-2/+9
| | | | | | | | | | | | | Avoid using realpath(X,0) on Mac OSX at all, since even on versions of OSX where realpath(X,0) is supported, we still get the legacy version due to our compiler flags. If we were to change the -mmacosx-version-min to 10.5 or higher then this patch would be safe but unnecessary. Task-number: QTBUG-28282 Change-Id: Iee21003f3e9616482483a05ceee706b476091914 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
* Fix QtBase cross compilation in debug mode for iMX6 targets.Milian Wolff2013-01-141-3/+6
| | | | | | | | | | The platform specific CFLAGS, most notably -march=armv7-a, were only added to QMake's _RELEASE flags but not to the _DEBUG flags. This then resulted in strange compilation errors such as this one: http://qt-project.org/forums/viewthread/22141 Change-Id: Ib47996c6946b043294437e8543827da270df836d Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* set gtk-entry im-module to none in gtkstyleWeng Xuetian2013-01-141-1/+11
| | | | | | | | | | | | | | | | in qt5, gtkstyle use gtk_widget_send_focus_change, this had a side effect that will trigger real gtk im module, if qt load the same qt and gtk im module for same input method, it will cause conflicts for qt im module. The only gtk widget have im-module property is GtkEntry and GtkTextView, since only GtkEntry is used here, we only need to override im-module for GtkEntry. gtk-im-context-none exists in gtk+ since 2.19.5, and for older version, it will also harmlessly fallback to gtk-im-context-simple. Change-Id: I4ffb93453e77c8d5db3349b084342bdca8e4a571 Reviewed-by: Liang Qi <liang.qi@digia.com> Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
* QMenu: Fix nested popup when keyboard shortcut is usedOrgad Shaneh2013-01-142-1/+18
| | | | | | | | | Task-number: QTBUG-20403 Change-Id: I2a5fe00dd16e9dc1ec0d742a8f48083fc2954996 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com> Reviewed-by: Olivier Goffart <ogoffart@woboq.com> Reviewed-by: Jarek Kobus <jaroslaw.kobus@digia.com>
* Split QQNXLocaleData::readPPSLocale()Rafael Roquetto2013-01-142-6/+26
| | | | | | | | | | | | | | Because this method creates a QSocketNotifier, it needs to be split into a part that is run on initialization, namely QQNXLocaleData::initialize(), and one that is run delayed through event loop invocation, namely QQNXLocaleData::installSocketNotifier(). Task-number: QTBUG-28701 Change-Id: Ib60000902692bbca4820d3d0bc7719212668dfa9 Reviewed-by: Laszlo Papp <lpapp@kde.org> Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com> Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
* QNX: Make QWidget::hide() work immediately.Sergio Martins2013-01-141-2/+8
| | | | | | | Change-Id: I3ea2556769703a8cd4c2931cc2332ab0733fbea6 Reviewed-by: Sean Harmer <sean.harmer@kdab.com> Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com> Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
* Docs: fix the minimum required GTK+ versionJ-P Nurmi2013-01-141-1/+1
| | | | | | | | The minimum GTK+ version was bumped from from 2.10 to 2.18 (sep 2009) in commit 2cce297b58ae50486094a6dcc148484a4a4bace5. Change-Id: I77a48c8a3b0955b00e399f714949d08293abbebd Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
* Fix crash when trying to create paths for color-glyphs (Emoji) on MacTor Arne Vestbø2013-01-143-3/+28
| | | | | | | | | | | | | | CoreText segfaults when creating paths for color-glyphs: 0 0x00007fff8fd41e69 in TFont::FindColourBitmapForGlyph () 1 0x00007fff8fd417ac in TFont::CreatePathForGlyph () 2 0x000000010567d1af in QCoreTextFontEngine::addGlyphsToPath (...) So we shortcut the code-path, since we don't support Emoji yet anyways. Task-number: QTBUG-28615 Change-Id: Ife16ae4959077d9eaaf6ea5cd1f27a4e2e01e7f5 Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
* Fix crash in tst_qtreewidget.Friedemann Kleint2013-01-141-1/+1
| | | | | | | | | | A division by zero occurred since an empty model was used. Task-number: QTBUG-28611 Change-Id: I1f9e869bda9f76a1c97840dff6ba48ab813bce9a Reviewed-by: Janne Anttila <janne.anttila@digia.com> Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
* BlackBerry: change SSL root cert folderPeter Hartmann2013-01-141-1/+1
| | | | | | | | | Currently /etc/openssl/certs is symlinked to /var/certmgr/web/user_trusted, but this will be changed in the future. /etc/openssl/certs is the folder to be used to read the root certs. Change-Id: Ic037e5075ec7ee50c132fe08dc69abbe585e32e4 Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
* Resolve some race conditions on tst_QSharedMemoryThiago Macieira2013-01-142-10/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This test runs fine almost all of the time on systems with 1 processor, which were the norm when the test was written and are still the way that the Qt Continuous Integration system works as of today. But it falls flatly on multi-processor systems. The root of the problem is that QSystemSemaphore recreates the semaphore if it disappears underneath it. However, the recreation process is not thread-safe at all: if two threads race to recreate it, weird things might happen. strace on Linux shows that a thread got stuck trying to acquire the semaphore: <... nanosleep resumed> NULL) = 0 stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0 stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0 semget(0x51001388, 1, IPC_CREAT|IPC_EXCL|0600) = -1 EEXIST (File exists) semget(0x51001388, 1, IPC_CREAT|0600) = 114786308 semop(114786308, {{0, -1, SEM_UNDO}}, 1 <unfinished ...> This problem does not happen if the creation and destruction of the QSharedMemory (which uses QSystemSemaphore) does not race with other threads or processes attaching and detaching. For the threads test it's easy. For the processes, we use stdin and stdout as a communication channel. Change-Id: Ie11b135431d4abfc59234654848b67f622eb03c9 Reviewed-by: Richard J. Moore <rich@kde.org>
* Remove the framework directories from qmake's default include dirsThiago Macieira2013-01-141-0/+1
| | | | | | | | | | | | On Mac, GCC and Clang print "(framework directory)" at the end of the directory listing for includes if that's a framework dir. The directory with "(framework directory)" at the end does not exist, so it doesn't affect anything by being there. But we don't have to keep the list longer just for that. Change-Id: I3d031d3d15c75801ec0d6112b2c913bd63e5def3 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* Remove the QtSql driver headers from the APIThiago Macieira2013-01-149-0/+48
| | | | | | | | | These headers are technically private API, since they include private headers. They should be _p.h actually, but that change I'll leave for 5.1. Change-Id: I2dec222854e147da0fc166de311012472954012e Reviewed-by: Mark Brand <mabrand@mabrand.nl>
* Fix QOpenGLContextGroup object leakJian Liang2013-01-141-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Task-number: QTBUG-29056 QOpenGLContextGroup object is designed to be destroyed by deleteLater(), but this method will not always work due to the fact that in many cases event loop will exit before the deferred deletion of the QOpenGLContextGroup object is queued. Think about the following case: int main(int argc, char *argv[]) { QApplication a(argc, argv); QGLWidget w; w.show(); return a.exec(); } In the above program, the event loop will exit before QGLWidget object's destruction. This will cause the QOpenGLContextGroup object hold by QGLWidget object never been deleted. This patch will delete QOpenGLContextGroup object directly with delete operator if the current thread is the same as the thread which the QOpenGLContextGroup lives in. Change-Id: If835d7482474f4a668763fc7c21b293a27f075fd Reviewed-by: Samuel Rødal <samuel.rodal@digia.com> Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
* tst_bic: Add bic data for QtConcurrent and QtPrintSupportSergio Ahumada2013-01-143-8/+20849
| | | | | | | | Task-number: QTQAINFRA-321 Change-Id: I2699a13c3d8a7df9b12049e0337501a4e24d2d64 Reviewed-by: Caroline Chao <caroline.chao@digia.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Janne Anttila <janne.anttila@digia.com>
* Fix compile when verify is already definedAndy Shaw2013-01-141-0/+4
| | | | | | | | | | On Mac if AssertMacros.h has already been included then it defines verify which conflicts with the verify static function. Therefore we just undef this if is already defined. Task-number: QTBUG-27316 Change-Id: I5960e504c4efa4fc4ff65ba66bbd7decb33ffc62 Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* Fix memory leak in windows vista styleJian Liang2013-01-111-3/+21
| | | | | | | | | | | Introduce a function named deleteClonedAnimationStyleOption() in qwindowsvistastyle.cpp to delete style option cloned by clonedAnimationStyleOption() to prevent object leak which is hold by the actual style option object. Change-Id: I1afd95ddab237059ce3460ac0b52a65de102eaa5 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Fix incorrectly disabled autotestShane Kearns2013-01-111-1/+1
| | | | | | | | One of the IPv6 autotests was always disabled instead of being disabled only when the system has no IPv6 support. Change-Id: I34dffbeae6ba85a706bfeb0cc4750a4514b73a65 Reviewed-by: Peter Hartmann <phartmann@rim.com>
* Enable tst_qwidgetsvariant testJędrzej Nowacki2013-01-111-0/+1
| | | | | | | The test for a magic reason was not build by default. Change-Id: I21c7fc959d76d6faac0091495f965f3da6d415b1 Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
* qdoc: Fix problem of missing inherited membersMartin Smith2013-01-112-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was another bug resulting from modularization. qdoc is now run twice for each module in Qt 5. First, qdoc is run with the -prepare flag for each module. The only thing qdoc generates is the .index file for each module. Then qdoc is run with the -generate flag for each module. Here, for each module, qdoc first reads the .index files for the modules on which the current module depends. Then qdoc generates the docs for the module. qdoc was not reading the index files for the prerequisite modules, when it was run in the -prepare phase. This has now been corrected. qdoc now reads the prerequisite .index files in both the -prepare phase and the -generate phase. Note that this requires that the order qdoc runs in the -prepare phase must be the same as the order of building modules when building Qt 5. This change also tells qdoc to ignore nodes, when traversing its main data structure to output docs, if the nodes came from reading a .index file, because the docs for these nodes are generated in the -generate phase for their respective modules. Task-number: QTBUG-28508 Change-Id: Id73652ae1c4022e4c9e4f199caab12a854e5f9b4 Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Doc: corrected typo "the the"Nico Vertriest2013-01-1111-52/+52
| | | | | | | | | | | Task-number: QTBUG-28756 Spurious repetition of the definite article Trailing space issue corrected. Change-Id: I3a051f5dc291e546d8d67d6775e84b388bdc0363 Reviewed-by: Topi Reiniö <topi.reinio@digia.com> Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
* Fix accidental obsolation of Qt::InputMethodQueryPekka Vuorela2013-01-111-1/+1
| | | | | | | \obsolete for one value was marking the whole enum obsolete. Change-Id: If022b4af8365e3448556ca11a538203ab5c63c78 Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Clear backingstore for windows with alpha channel.Friedemann Kleint2013-01-112-5/+13
| | | | | | | | | Fixes painting artifacts in translucent windows. Task-number: QTBUG-28531 Change-Id: I00a7a86f88a40d356fa3e37bd497a288b2118469 Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
* fix linuxfb crash on program startKonrad Rosenbaum2013-01-101-1/+1
| | | | | | | | the KDGETMODE ioctl should use a pointer to int as param, not a pointer to pointer to int, otherwise it may crash Change-Id: Ie255d240f3b6ca1ff5398f972308116135374ae3 Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
* Fix socket binding on mingw buildsShane Kearns2013-01-101-14/+8
| | | | | | | | | | | | | | | | The mingw headers lack the IPV6_V6ONLY define, depending where you get them from. Currently the headers provided by mingw-builds are more complete than those from mingw.org itself. I have removed the compile time check, defined the macro if it is undefined, and it should be just a runtime check for if you are running on windows XP you get no dual stack binding. Task-number: QTBUG-28787 Task-number: QTBUG-28971 Task-number: QTBUG-28972 Change-Id: Iafadbb55d367c44ba9f812a24115e65591701b54 Reviewed-by: Ilya Sidorov Reviewed-by: Peter Hartmann <phartmann@rim.com>
* Fix QVariant in a static build.Jędrzej Nowacki2013-01-101-0/+4
| | | | | | | | | The patch cases registration of QVariant handler for widgets. Task-number: QTBUG-28528 Change-Id: I645e8054bb96db0b92edf5df36f206ec1965ad40 Reviewed-by: Olivier Goffart <ogoffart@woboq.com> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Ignore WasDeclaredAsMetaType flag during binary check.Jędrzej Nowacki2013-01-101-5/+31
| | | | | | | | | | | | | | | | Nobody should break ODR, but we were living with apps breaking it for at least 8 years. Sure it is an undefined behavior but in many cases it works. I do not think that Qt should enforce usage of a proper C++, it is role of a tool chain. Qt can only indicate that something is going terribly wrong. Make message a bit more verbose. Sometimes the ODR violation is not that easy to fix, therefore a hint is a nice addition. Update documentation of qRegisterMetaType. Change-Id: I61dcccc840eec80a4ed5b8a212a912807d239d8c Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Doc: cleanPath also normalizes separatorsLeena Miettinen2013-01-101-2/+2
| | | | | Change-Id: I0e5c1cd45ad90fceaed931b7014b4542e8aaa9d7 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* Protect Q_UNREACHABLE and Q_ASSUME by Q_ASSERT.Jędrzej Nowacki2013-01-102-12/+29
| | | | | | | | | Both Q_UNREACHABLE and Q_ASSUME with an invalid condition can produce really weird side effects and crashes. Change-Id: I4d808c705ae98388ef5853e6539b70bd5e5ad34b Reviewed-by: Simon Hausmann <simon.hausmann@digia.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Add an autotest for Canadian locale(dateFormat)Mehdi Fekari2013-01-101-0/+4
| | | | | Change-Id: I68a91a418c418e113ecfe66769a7b3bc46de380c Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
* Don't assume QSurfaceFormat's stencil buffer size is >= 0Tor Arne Vestbø2013-01-101-1/+1
| | | | | | | | | | | | | | The value -1 is used to indicate no stencil buffer, so we have to check for sizes <= 0 when deciding whether or not to triangulate the path in QOpenGL2PaintEngineExPrivate::fill(). This fixes an issue where filling a path would end up filling the whole outline of the path, which was very visible with fonts over a certain size (when we go from using the glyph cache to drawing filled paths for each glyph). Change-Id: Iafa96124481936db1e5109bba6166a6038c7ca83 Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
* qmake: Add application icon support for windowsDebao Zhang2013-01-103-11/+21
| | | | | | | | | | | A new qmake's variable RC_ICONS is introduced to specify the icons. The first one will be used as the application's icon. Change-Id: I4218db795837d470087dff8526eb0e4cb81ce5ed Reviewed-by: Orgad Shaneh <orgads@gmail.com> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
* qdoc: Fix some old links and references to NokiaSergio Ahumada2013-01-101-68/+68
| | | | | | Change-Id: I06535a7e301c3986fb104b7092934e8925bacd39 Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com> Reviewed-by: hjk <qthjk@ovi.com>
* Use pos() if the widget is a child of a native windowAndy Shaw2013-01-101-3/+6
| | | | | | | | | | If the widget is embedded in a native window then pos() should be used instead of mapToGlobal() so that the right position is used. This was reproduced with the qtwinmigrate solution as the dialogs were not centered correctly. Change-Id: I2ce7771f8c1a73aa74ab11faf4f9c57b922eefab Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Support MinGW for CTest test casesJonathan Liu2013-01-091-1/+2
| | | | | Change-Id: I581701f0b830292a21bc805da0398cbc96f82918 Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
* Update translucency correctly in QtWidgets.Friedemann Kleint2013-01-091-2/+9
| | | | | | | | | | | Fixes breakage introduced by cdc436ebe625153c626784a15cb224556fca3728 . Top level widgets with translucent backgrounds were invisible since opacity was set to 0. Task-number: QTBUG-28531 Change-Id: I97058ac1b971422f3bda3a5ffed479ec55bfe5d4 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
* The executables always go into QT_HOST_BINS.Stephen Kelly2013-01-091-1/+1
| | | | | | | | Task-number: QTBUG-28922 Change-Id: I7afaee292a0026d67866e4f1f711296adee8f8de Reviewed-by: Andy Nichols <andy.nichols@digia.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* Compile in 32-bit mode.Morten Johan Sørvig2013-01-091-2/+2
| | | | | | | CGRect == NSRect only in 64-bit mode. Change-Id: I069b5b050ccf02654a65375c3ab0f58f7d5cc659 Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
* Don't scale 0-region or region without rectsTor Arne Vestbø2013-01-091-0/+3
| | | | | Change-Id: Ieb523dadc5d726e26645b3a90652be95c2707ea8 Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
* More explicit QCocoaAccessibleElement memory mngmtMorten Johan Sorvig2013-01-094-8/+16
| | | | | | | | | | Don't autorelease in the elementWithInterface function, rename it to createElementWithInterface. The element can then be released immediately or autoreleased ("delete later"). Change-Id: I155a85404c34d756c1752eb7c24a7fb0f3cf2e77 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
* tst_bic: Remove 'timex' class from linux-gcc-{amd64,ia32}Sergio Ahumada2013-01-0916-80/+0
| | | | | | | 'timex' is not a Qt class, so there is no need to check it. Change-Id: Ic77b3518e5a7eaf2c2bc7dcd98d1f9aebf4b655d Reviewed-by: Caroline Chao <caroline.chao@digia.com>
* Removed hardcoded values from tst_qgraphicsview::scrollBarRangesOliver Wolff2013-01-094-1197/+731
| | | | | | | | | | | | | | | | | | | Instead of testing the "windows" and "motif" styles, that test should actually test the scrollBarRanges for all available styles. To be able to do that, the magic numbers 16 (width/height of scrollbars) and 4 (spacing for the faux motif style) were replaced and instead of setting the explicit values in the data the "number of scrollbars/spacings to add/remove" is saved in a struct and the value of these (depending on the style) is obtained in the test run. This change does not also cause the fusion style to also be tested but also fixes this test for Windows 7 and 8 (Aero) where the scrollbar width/height is not 16 but 17. Task-number: QTBUG-28611 Task-number: QTBUG-29002 Change-Id: I5d103018fde81cee6e6e89cd414426768b2dc8e7 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Rename qt_mips_asm_dsp.h to a "_p.h" headerThiago Macieira2013-01-095-3/+25
| | | | | | | | | | | It mustn't be installed and it mustn't be available in the master include. It's an assembler header anyway. Also, take the opportunity to add the "We mean it". Change-Id: Id4233e5bda458714a0d329549afe499d861acc56 Reviewed-by: Adrian Perez de Castro <aperez@igalia.com> Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
* Define Q_COMPILER_AUTO_FUNCTION for MVSCThiago Macieira2013-01-081-0/+1
| | | | | | | | | This definition was missing. It's clear MSVC supports this feature because it has been in use in qtconcurrentrun.h under an #ifdef Q_COMPILER_DECLTYPE, which is defined for MSVC. Change-Id: Id76198b2be8bba13fd00c65d6d4f73d3ef601449 Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
* test: Add bic data for linux-gcc-ia32Sergio Ahumada2013-01-088-0/+59020
| | | | | | Task-number: QTQAINFRA-321 Change-Id: I990f0c525fbd0b0b3818b0f7d86ed99438821baa Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix compile when QT_EVAL is definedAndy Shaw2013-01-081-3/+3
| | | | | | | Change-Id: Id1acae0c5941e5409ca540017c0c0139e1cc4d2f Reviewed-by: Samuli Piippo <samuli.piippo@digia.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
* Fix QNX QPA plugin clipboard implRafael Roquetto2013-01-081-2/+7
| | | | | | | | | | | | QQnxCliboard::setMimeData was not cleaning the system clipboard aproppriately when m_mimeData != 0 but m_mimeData->userMimeData == 0, as it would return early before the empty_clipboard() statement. Also, we need to emit the dataChanged() signal after the clipboard has been cleared as well. Change-Id: Ie06609e6e3a0a0135f1cdb6cf4c90b490ef2fc28 Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com> Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 23:30:36 +0000