summaryrefslogtreecommitdiffstats
path: root/mkspecs
Commit message (Collapse)AuthorAgeFilesLines
* qmake: skip license check while building qtOswald Buddenhagen2018-07-202-2/+3
| | | | | | | | | | | | | | | | | | configure already does it for qt itself, so it's pointless to ever invoke in default_pre.prf. to make the exclusion work during the makespec reload during early setup, we pull ahead the restoration of CONFIG, hoping it won't cause too many side effects. another change in qt5 will ensure that top-level builds are also covered. finally, configure tests also need an explicit exclusion. that way, attempts to re-configure build trees of commercial builds after the day of the first configuration do not fail anymore. Task-number: QTBUG-63452 Change-Id: I42264f64d7621784d4d67bde885a8e501f5ca413 Reviewed-by: Kai Koehne <kai.koehne@qt.io>
* macOS: Use QMAKE_BUNDLE for the app part of the bundle identifier valueAndy Shaw2018-07-181-1/+4
| | | | | | | | | | | If QMAKE_BUNDLE is set then this should be used for the bundle identifier value instead of the product name. This ensures that when an application provisioning profile is used that it will correctly match against it. This also brings it in line with the documented behavior. Change-Id: I627d212f59d862e7a881941748db5ef98ab4f463 Reviewed-by: Eike Ziller <eike.ziller@qt.io> Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* configure: pull ahead gcc-sysroot processingOswald Buddenhagen2018-07-131-1/+1
| | | | | | | | | | | | | the sysroot flags need to be established even before setting up the spec, because as soon as that happens, toolchain.prf will try to determine the default paths and cache them. this also fixes sysroot use in toolchain flag support tests, which run (somewhat) independently from the toolchain setup. Task-number: QTBUG-63483 Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* Fix QtWayland non-toplevel in-source buildsPaul Olav Tvete2018-06-271-4/+8
| | | | | | | | | | | | Tell qtwaylandscanner to export the symbols when we're building a module. This is done by specifying the include directory on the qtwaylandscanner command line. Task-number: QTBUG-68773 Change-Id: Ib575222261831ab01eb43e6c7caefb07e314492b Reviewed-by: Johan Helsing <johan.helsing@qt.io> Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* configure: permit digits in variable assignments on the cmdlineOswald Buddenhagen2018-06-271-4/+4
| | | | | | Change-Id: I21e4f93b119d28fe30cb2436c76a03b67c78fe7a Reviewed-by: Rainer Keller <Rainer.Keller@qt.io> Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
* wayland-scanner.prf: Remove special-casing for generated headersJohan Klokkhammer Helsing2018-06-261-63/+12
| | | | | | | | Generated headers can now be installed using inject_headers and private_headers instead. Change-Id: I51d98e2e05d12aa9f6ab09f8ccb12b81a0c0cd6f Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Fix moc warnings with no_include_pwd and shadow buildsKai Koehne2018-06-251-1/+1
| | | | | | | | | | | | | | | If CONFIG option no_include_pwd is set, moc does not add the build directory to its include path. The path to the generated moc_predefs.h file is by default relative though, resulting in moc warnings: Warning: Failed to resolve include "debug/moc_predefs.h" for moc file xxx myheader.h Fix this by always making the path to moc_predefs.h absolute. Task-number: QTBUG-69087 Change-Id: I8ef79c8340f9ebd6b0bba15e026d65ef3c088535 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* mkspecs: Allow specifying a CROSS_COMPILE for mac/clang targetsMartin Storsjö2018-06-212-6/+6
| | | | | | | | | | | | | | | | | | | This allows distinguishing between these tools and tools for the host, when cross compiling. While mac tools normally only are available on macOS, there are third party efforts to port them to other platforms. In these cases, it might be useful to use a prefix (either some sort of triplet prefix, or an absolute path) to distinguish between the host build platform compilers/tools and the ones for the cross target. The use of this variable matches the one used in a lot of other mkspecs, and shouldn't cause any issues for those who aren't setting it. Change-Id: Iaeba571d955ea79ed1249989fcc525eb1eaf1f5c Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
* Merge "Merge remote-tracking branch 'origin/5.11.1' into 5.11" into ↵Liang Qi2018-06-211-0/+2
|\ | | | | | | refs/staging/5.11
| * Merge remote-tracking branch 'origin/5.11.1' into 5.11Qt Forward Merge Bot2018-06-191-0/+2
| |\ | | | | | | | | | Change-Id: I9a4571ccf826a86e055dfbba23b5e5cbd8ea55e8
| | * Merge 5.11 into 5.11.1Oswald Buddenhagen2018-06-071-2/+3
| | |\ | | | | | | | | | | | | Change-Id: I28f48e980a9e23ddde5251608dd9d1d83df65392
| | * | Opt out of new Xcode build system until we can handle its requirementsTor Arne Vestbø2018-06-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new build system in Xcode 10 requires outputs from shell script to be explicitly declared if they are used by subsequent build phases, otherwise the build system may attempt to search for the file before it has been generated, causing the build to fail. The build phase we use for Qt preprocessing (moc, rcc, etc), does not list these output files, so we need to disable the new build system for now. Change-Id: I7404c19021f57489e985bd1203ad09ce9b83b090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io> Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* | | | Replace commercial preview license with Qt License Agreement 4.0Kai Koehne2018-06-211-1/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do allow people to build from git using the Qt License Agreement 4.0. The license agreement text is the same as in the installers, except that some Unicode characters got normalized to their ASCII variants, and things have been properly wrapped. [ChangeLog][Licensing] The commercial preview license in the git checkout has been replaced by the Qt License Agreement 4.0 text. This makes it explicit that commercial customers of The Qt Company can use the git version under commercial terms. However, support is (still) only provided for builds from released branches of Qt. Task-number: QTBUG-52222 Change-Id: I9e99b68e236a09610b798ba7a841e5a9d1ce6898 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* | | Make sure MODULE is set even when we are not creating a pri fileRobert Griebl2018-06-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wayland-scanner.prf uses it as a trigger, so this is needed to make dynamic non-prefix builds work. amends 427e5d61b7. Task-number: QTBUG-68773 Change-Id: Ia7d3bc39cb2b0f225e827f64eb17d061d594b265 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* | | MSVC: Enable the detection of C++14 and 17 in MSVC 2017 15.7Thiago Macieira2018-06-111-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need -Zc:__cplusplus in order to enable the __cplusplus macro having the correct value. This causes configure to now print: Checking for C++14 support... yes Checking for C++1z support... yes and Using C++ standard ..................... C++1z Change-Id: I5d0ee9389a794d80983efffd152c95a4d9d8adbc Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Add support for building QtWayland on macOSRobert Griebl2018-06-092-9/+23
| |/ |/| | | | | | | | | Change-Id: Ibed63a01abf32e10a31c610996ae93d3bd9ce153 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
* | configure: permit multiple repos to use the same directory namesOswald Buddenhagen2018-06-011-2/+3
|/ | | | | | | | | | | | otherwise, names like "core" are too likely to clash. note that the directories (which contain configure files) still need to have unique names within one repository. that's unlikely to be a problem. Task-number: QTBUG-68385 Change-Id: I01c60479a6a45494ba60e798ceada231d8870556 Reviewed-by: Michal Klocek <michal.klocek@qt.io>
* nuke {tests,examples}_need_tools flagsOswald Buddenhagen2018-05-301-2/+2
| | | | | | | | | | making the dependencies on tools/ optional was meant to maximize build parallelization, but it's just too fragile, as nobody ever remembers (or even knows) about having to add the flags when necessary. Task-number: QTBUG-68478 Change-Id: I85c0b65d5a63109aedc24bc17eaaaf46b777b634 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* remove support for demos/ directoriesOswald Buddenhagen2018-05-301-10/+0
| | | | | | | no module had one for ages. Change-Id: Ifb829140e6c97d43e1c8431cb377af8a12231f95 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* Mark Clang 6 as warning-freeThiago Macieira2018-05-221-2/+2
| | | | | Change-Id: I7f8a97595d874145b160fffd152973700c61a0cb Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* Fix build of applications on iOSChristoph Keller2018-05-132-7/+7
| | | | | | | | | | | | When QMAKE_TARGET_BUNDLE_PREFIX is set in the .pro file then this value should be used instead of the default value for PRODUCT_BUNDLE_IDENTIFIER. Therefore, PRODUCT_BUNDLE_IDENTIFIER should be set inside default_post.prf so that it can take the value of QMAKE_TARGET_BUNDLE_PREFIX after it may have been set. Task-number: QTBUG-66462 Change-Id: Iec1e2a43632efe6021b9d6bfdb78bd941326c456 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Merge remote-tracking branch 'origin/5.11.0' into 5.11Qt Forward Merge Bot2018-05-091-4/+5
|\ | | | | | | Change-Id: Id6e2acd5e31c1ac858ddf1d8873a6f10694141de
| * syncqt: fix CamelCase aliases for injected headersOswald Buddenhagen2018-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | don't put them into GENERATED_HEADER_FILES, as they obviously cannot be found in a pre-synced source dir. instead, let the injection code itself add them to INJECTED_HEADER_FILES. Task-number: QTBUG-67813 Change-Id: Id2a7c565b14fcba8aba9d1dd8b1dd39c586d0d91 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
| * syncqt: don't write INJECTED_*HEADERSOswald Buddenhagen2018-04-251-4/+4
| | | | | | | | | | | | | | | | these are actually redundant with INJECTIONS. Change-Id: I0a71930401e00d30c9898b4d958de5e89c496d18 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* | Do emit CMake declarations for existing private headersUlf Hermann2018-04-271-5/+5
|/ | | | | | | | | | We need to make sure we don't emit CMake declarations for private headers if those headers are absent. However, most of the time we have private headers and should add them. Task-number: QTBUG-37417 Change-Id: I639eb93d008de27928dedac540894af70c1883b9 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* qmake: fix sdk resolution on macosTim Uy2018-04-181-6/+6
| | | | | | | | | the 'info' variable was re-used too early. make a new one 'infoargs' instead. Task-number: QTBUG-67286 Change-Id: I77881ecbfce338d653358c5e5edac84e1c0c7de3 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* iOS: Allow building QML based test casesAndy Shaw2018-04-181-1/+0
| | | | | | | | | | In order to be able to build and test a testcase on an iOS device it needs to be a bundle. So the app_bundle config should only be removed if the testcase_no_bundle is set. This is already done by testcase.prf. Task-number: QTBUG-45211 Change-Id: I4f16ea832ccff2a5db5fed0050fa0344b4ac9ad6 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Use optimize_size instead of duplicating similar logicAllan Sandfeld Jensen2018-04-143-14/+2
| | | | | | | | | The android mkspecs had their own way of doing the same as optimize_size Change-Id: Id05822df6bdeb8b3aafada2901bd61530c490fe9 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: BogDan Vatra <bogdan@kdab.com>
* rework syncqt interaction regarding cross-tree pathsOswald Buddenhagen2018-04-123-10/+22
| | | | | | | | | | | | | | instead of relying on more or less accidental qmake behaviors regarding the base dir for relative paths (esp. if a file does not exist yet), make everything explicit. to that effect, clearly define the base tree (source or build) for every syncqt-generated variable, and write only in-tree relative paths to the variables. on the receiving end, resolve the paths as soon as headers.pri was read. Task-number: QTBUG-67111 Change-Id: I32ae5760fb62ebc650fdb69e46aac786a8141564 Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* configure: cache test output as wellOswald Buddenhagen2018-04-102-5/+39
| | | | | | | | that way we can create a config.log which is consistent with the end state even if (some) tests are not executed this time around. Change-Id: Ia953ede62d6640aab912559f435ceb1f9ec6d9dc Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* don't call qmake's exists() with an empty argumentOswald Buddenhagen2018-04-101-1/+3
| | | | | Change-Id: I73330bd1c2de1734c5ac5c668ff9af7e85fc902a Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* macx-clang: Update informal documentation for xcb buildGabriel de Dietrich2018-04-091-2/+5
| | | | | | | | | Remove references to XKB and explain what to do if pkg-config is missing or unwanted. Change-Id: I099bf01ff49e1b8f6e822a50f0fe4904965a7a9f Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Fix debug_and_release builds with CONFIG += qtquickcompilerSimon Hausmann2018-03-292-2/+3
| | | | | | | | | | | | For correct debug/ and release/ suffix substitution and thus avoid concurrent access to generated files, we have to declare the output directory variable used by qtquickcompiler.prf in qtdeclarative here and enable it for substitution. Change-Id: Id8483daffdf1b9990396c55f7bc0d08a2f65cafd Task-number: QTBUG-66675 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Revert "Detect C standard and try using the most recent"Friedemann Kleint2018-03-267-37/+2
| | | | | | | | | | | | | | The change causes a crash when compiling the xkbcommon 3rdparty library and compile failures (qtimageformats on Android). This reverts commit a47cb146809e32f43449dcfe9932833c2f0ab987. Task-number: QTBUG-67326 Task-number: QTBUG-67327 Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io> Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* Remove CMake code for CMake < 3.1Kevin Funk2018-03-242-17/+6
| | | | | | | | | This removes the following functions from Qt5CoreMacros: - qt5_use_modules(...) Task-number: QTBUG-63519 Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70 Reviewed-by: David Faure <david.faure@kdab.com>
* Detect C standard and try using the most recentAllan Sandfeld Jensen2018-03-217-2/+37
| | | | | | | Fixes the default C version used with gcc < 5 Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Fix CONFIG+=qtquickcompiler and immediate resources with shadow buildsSimon Hausmann2018-03-201-2/+2
| | | | | | | | | Generated files should be added to RESOURCES with an absolute path. Task-number: QTBUG-67011 Change-Id: Ief82b576824df9abd0901970f076e30dfe57b7d0 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Apple: resolve SDK version of QMAKE_LINK_C and QMAKE_LINK_C_SHLIBMarcus Calhoun-Lopez2018-03-071-1/+1
| | | | | | | | | | | On Apple OSes, both compilers and linkers are given an absolute path. For consistency, the same should be done with the C linkers. The change is also a convenience to the MacPorts project, which actively discourages ambiguous compiler names. (https://trac.macports.org/wiki/UsingTheRightCompiler). Change-Id: Ic1885aed825340696e9fde766788eebf51de3ff6 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Android: add option `-mstackrealign` to clang-x86 mkspecVyacheslav Koscheev2018-03-061-1/+1
| | | | | | | Task-number: QTBUG-66770 Change-Id: I5e8ced0fa60c67d7908f21e5c486fea0d7a50004 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: BogDan Vatra <bogdan@kdab.com>
* Add WFD_DEVICE_CLIENT_TYPE attribute for INTEGRITY S820Am ADPKimmo Ollila2018-03-051-1/+1
| | | | | | | | | | | | | This is needed to be compatible with latest Qualcomm BSP releases. This patch also makes it possible to select HW layer via QT_OPENWFD_CLIENT_ID and QT_OPENWFD_PIPELINE_ID environment variables. Change-Id: Ie795b21afc61a1de7c1d0b52cdb30a754e3f8266 Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io> Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io> Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io> (cherry picked from commit 00f693d3e5046999270c92731e34a3e7fcd01c6b) Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* configure: introduce 'subarch' term to expression evaluatorOswald Buddenhagen2018-02-221-0/+6
| | | | | | | | | | | ... and make use of it. it's a logical continuation of the 'arch' term, and will be used also in qt3d's configure. Started-by: Thiago Macieira <thiago.macieira@intel.com> Change-Id: I940917d6763842499b18fffd1514c96889a0cc63 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* unify windows mkspecs: define c++ flags explicitlyAlexander Shevchenko2018-02-224-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | with 40e87491 merged, 'QMAKE_CXXFLAGS' variable in 'win32-g++' toolchain became defined via 'QMAKE_CFLAGS'. the similar can be found in 'win32-clang-msvc' and 'win32-icc' toolchains too. this works for now, because such definitions just duplicates code from includes, like 'gcc-base.conf', 'msvc-desktop.conf', etc. but it would became broken, if changes would be applied to 'QMAKE_CXXFLAGS' definitions in that includes, prior to the redefinitions in 'win32-*/qmake.conf' toolchains. thus 'QMAKE_CXXFLAGS' definitions in 'win32-*/qmake.conf' toolchains should not depend on 'QMAKE_CFLAGS' and be done explicitly. in order to apply this change correctly to 'win32-icc' toolchain, its 'QMAKE_CFLAGS' variable should become dependent on definitions in the includes, similar to 'win32-clang-msvc' and 'win32-msvc' toolchains. Change-Id: I5e820e44a769a590ba63f70dcb3a115311093311 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* mkspecs: Factorize common parts of win32-g++ and win32-clang-g++Martin Storsjö2018-02-213-133/+88
| | | | | Change-Id: I49dc036aedb4290889bce8ef616b4f7291e79d4f Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* fix installation of resources for example sourcesAlexander Volkov2018-02-211-1/+1
| | | | | | | | | contains() interprets the regexp as being implicitly anchored, so the leading part of the path needs to be explicitly matched. Change-Id: I1efa07dc99bb2db1717d2a66621899e23c144164 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* qmake: fix immediate RESOURCES with absolute RCC_DIROswald Buddenhagen2018-02-201-1/+1
| | | | | | | | $$RCC_DIR can be absolute, so simple concatenation with $$OUT_PWD is bound to fail. Change-Id: Ibd80c49656c0e03b8a86ebca851af106cced08fb Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* mkspecs: Add a win32-clang-g++ mkspec, for clang targeting mingw, like g++Martin Storsjö2018-02-162-0/+130
| | | | | Change-Id: I427e46e6c34c2beeb2a815f1af512e4e8bd213c2 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Merge "Merge remote-tracking branch 'origin/5.10' into 5.11" into ↵Liang Qi2018-02-154-10/+10
|\ | | | | | | refs/staging/5.11
| * Merge remote-tracking branch 'origin/5.10' into 5.11Liang Qi2018-02-154-10/+10
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: src/corelib/corelib.pro src/corelib/global/qrandom.cpp src/network/access/qhttpnetworkrequest_p.h src/plugins/platforms/cocoa/qcocoamenu.mm src/plugins/platforms/cocoa/qcocoansmenu.mm src/plugins/platforms/cocoa/qcocoawindow.mm src/plugins/platforms/cocoa/qnsview.mm src/plugins/platforms/offscreen/qoffscreenintegration.h src/widgets/kernel/qaction.cpp src/widgets/widgets.pro Done-with: Andy Shaw <andy.shaw@qt.io> Change-Id: Ib01547cf4184023f19858ccf0ce7fb824fed2a8d
| | * unify windows mkspecs: move angle/vulkan includesAlexander Shevchenko2018-01-272-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'win32-icc' toolchain: - remove duplicated angle/vulkan includes. 'win32-g++' toolchain: - place angle/vulkan includes before the unrelated compiler-related variable re-definitions, similarly to the 'win32-clang-msvc', 'win32-icc', and 'win32-msvc' mkspecs. Change-Id: Ie04bc9fb1d51ec0366b42713439f680e51214bbc Reviewed-by: Oliver Wolff <oliver.wolff@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
| | * Fix build of applications on iOSJake Petroules2018-01-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PRODUCT_BUNDLE_IDENTIFIER property was not defined in the Xcode project file and therefore the build would fail. This fixes a regression introduced by 0749ba2c5e. Task-number: QTBUG-65673 Change-Id: I8089b36d86588223ec34859af7388c99a3574d8b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-04 07:42:34 +0000