| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit extends functionality for QLocale::codeToLanguage()
and QLocale::languageToCode() by adding an additional argument
that allows selection of the ISO 639 code-set to consider for
those operations.
The following ISO 639 codes are supported:
* Part 1
* Part 2 bibliographic
* Part 2 terminological
* Part 3
As a result of this change the codeToLanguage() overload without
the additional argument now returns a Language value if it matches
any know code. Previously a valid language was returned only if
the function argument matched the first code defined for that
language from the above list.
[ChangeLog][QtCore][QLocale] Added overloads for codeToLanguage()
and languageToCode() that support specifying which ISO 639 codes
to consider.
Fixes: QTBUG-98129
Change-Id: I4da8a89e2e68a673cf63a621359cded609873fa2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
Update the locale generation script to support Kaingang and
Nheengatu languages. These are new in CLDR v40. Regenerate
the locale data.
Task-number: QTBUG-94358
Change-Id: I5195d5161d8c4d9f17129bbcfde39dfd3fcf1cd5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update tst_qlocale to take into account "narrow" day representation
change for Russian locales. This version of CLDR changes narrow forms
to one letter. Previously those forms were identical to short forms
(two letter). The new representation is consistent with other languages
and so does not appear to be a bug.
Fixes: QTBUG-94358
Pick-to: 6.2
Change-Id: I9724c281a250685da8232e5c05c9c375a8c79253
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ordering function used to sort the locale data generated for
QLocale attempted to sort the default territory for a given language
and script before other territories, but was too tangled for it to be
obvious this is what it was doing. The result turned out to be
non-transitive. Replace with code that implements the same preference
but only applies it where the result is compatible with transitivity.
This leads to a shuffling of the order of the Serbian-language
locales, which sorts the Cyrillic ones before the Latin ones. This is
consistent with my reading of the CLDR data, which fills in Cyrillic
and Serbia for Serbian; Serbian/Cyrillic/Serbia did previously sort
before all other Serbian variants.
Thanks to Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io> for
discovering the non-transitivity.
Pick-to: 6.2
Change-Id: I0ce9f78e620e714f980f32b85b7100ed0f92ad74
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Routine update with minor changes to locale data, no new languages,
territories or scripts. Various Spanish locales change m_grouping_top
from 1 to 2, reversing a change to a test of Costa Rica's currency
formatting made in commit bb6a73260ec8272647265f42180963604ad0f755.
Includes updates to time-zone IDs.
Fixes: QTBUG-91478
Pick-to: 6.1 6.0 5.15
Change-Id: I78ee161275b3c456c5800a7317a96947c932cf8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The use of "Country" is misleading as some entries in the enumeration
are not countries (eg, HongKong), for all that most are. The Unicode
Consortium's Common Locale Data Repository (CLDR, from which QLocale's
data is taken) calls these territories, so introduce territory-based
names and prepare to deprecate the country-based ones in due course.
[ChangeLog][QtCore][QLocale] QLocale now has Territory as an alias for
its Country enumeration, and associated territory-based names to match
its country-named methods, to better match the usage in relevant
standards. The country-based names shall in due course be deprecated
in favor of the territory-based names.
Fixes: QTBUG-91686
Change-Id: Ia1ae1ad7323867016186fb775c9600cd5113aa42
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were extracting several candidate display names from CLDR for each
currency, joining them with semicolons, storing in a table, then using
only the first entry from the list - where we should probably have
used the first non-empty entry in any case.
So instead extract the first non-empty candidate name from CLDR and
store that simply, saving the need for semicolon-joining or parsing
out the first entry from the thus-joined list. This significantly
reduces the size of the currency name data table.
Change-Id: I201d0528348d5fcb9eceb5df86211b9c77de3485
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Follow through on a comment from 2012: sort the likely subtag array
(in the CLDR update script) and use bsearch to find entries in it.
This simplifies QLocaleXmlReader.likelyMap() slightly, moving the
detection of last entry to LocaleDataWriter.likelySubtags(), but
requires collecting all likely sub-tag mapping pairs (rather than just
passing them through from read to write via generators) in order to
sort them.
Change-Id: Ieb6875ccde1ddbd475ae68c0766a666ec32b7005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fresh on the heels of our update to v37, they've released a new version.
No new languages to complicate life, fortunately.
Updated license (year range) and attribution. One test also needed an
update: Catalan's long time format now parenthesizes the zone.
Task-number: QTBUG-87925
Pick-to: 5.15
Change-Id: I54fb9b7f084b5cd019c983c1e3862dc03865a272
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Binary-incompatible change: change the numeric values of QLocale's
Language, Script and Country enums, as encouraged by a comment in the
generator script enumdata.py and clarify documentation around that.
In the process (since I was changing almost every line anyway),
convert the dictionary values from (mutable) lists of length two to
tuples, since they are (and should be) immutable data.
Change-Id: I26222bce45b9f5074b1d81ed70015a75ac34adcd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
Our enumdata.py namings of countries had fallen somewhat out of sync
with CLDR's names. In the process, support including hyphenation in
the unsquashed name, along with spacing. Distinguish, in comments,
between older renamings and those first seen in Qt6.
Change-Id: I91ec444bf35222ab6a9332e389ace19cca0e4fdf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Routine update by running scripts, ignoring clang-format's extensive
grumbles. Added notes to util/locale_database/'s README, on the need
for that, and enumdata.py, on when to add entries. As usual, several
new locales are also added, for existing languages, territories and
scripts.
[ChangeLog][QtCore][QLocale] Updated to new version of CLDR (the
Unicode Consortium's Common Locale Data Repository) v37.
Fixes: QTBUG-84669
Pick-to: 5.15
Change-Id: Ib76848bf4bd1219180faf46820077e8d8049a4e3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d139128013c969a939779536485c1a80be977e with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In particular, this changed the US currency formats for negative
amounts to be parenthesised versions of the positive amount forms,
rather than having a minus sign after the $ sign. Test updated.
[ChangeLog][QtCore][QLocale] Currency formats are now based on CLDR's
accounting formats, where they were previously mostly based (more or
less by accident) on standard formats. In particular, this now means
negative currency formats are specified, where available, where they
(mostly) were not previously.
Task-number: QTBUG-79902
Change-Id: Ie0c07515ece8bd518a74a6956bf97ca85e9894eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When doing XPATH searches, child nodes that have distinguished
attributes that were not asked for should be skipped. This is part of
the LDML spec and matters when resolving locale inheritance. Scan the
LDML DTD (previously only scanned for the CLDR version) to find which
attributes of which tags are ignorable - all others are distinguished
- and take the result into account when performing XPATH searches.
The XPath we were using for currency formats wasn't excluding
currencyFormatLength elements with type="short" and patterns specific
to thousands (and larger multiples); this is fixed by taking
distinguished attributes into account. However, the XPATH also wasn't
specifying the always distinguished attribute type="standard" that
was, in practice, used for nearly all locales that weren't (wrongly)
using short-forms for thousands; so type="standard" is now made
explicit, so as to minimize the diff.
This leaves only twenty-one locales with a negative currency formats.
A later commit shall switch to using accounting by default (it falls
back via an alias to standard, in any case), thereby restoring the two
mentioned below that were using it by accident, but the present change
gives the minimal diff here.
Thousands-specific formats replaced with sensible ones:
* zh_Hant_{HK,MO} (Traditional Mandarin, Hong Kong and Macau)
* eo_001 (Esperanto)
* fr_CA (Canadian French)
* ha_* (Hausa, when not written in Arabic)
* es_{GT,MX,US} (Spanish - Guatemala, Mexico, USA)
* sw_KE (Swahili, Kenya)
* yi_001 (Yiddish)
* mfe_MU (Morisyen, Mauritius)
* lag_TZ (Langi, Tanzania)
* mgh_MZ (Makhuwa Meetto, Mozambique)
* wae_CH (Walser, Switzerland)
* kkj_CM (Kako, Cameroon)
* lkt_US (Lakota, USA)
* pa_Arab_PK (Punjabi, in Arabic script, as used in Pakistan; uses
arabext number system, whose currency falls back to latn's, for
which pa_Arab over-rides the thousands-format).
Format changed from an over-ridden type="accounting" to standard (so
these lost a negative-specific form) in:
* en_SI (English, Slovenia)
* es_DO (Spanish, Dominican Republic; same)
For some locales we were picking up over-rides of narrow or short list
formats, or formats for or-lists or unit-lists rather than and-lists,
in place of the standard list format, that these locales don't
over-ride, provided by a parent locale. This changed list formats for:
* en_CA, en_IN (dropped "Oxford" comma before "and")
* qu_* (Quechua; dropped "utaq", presumably meaning "and")
* ur_IN (Urdu, India; was using unit-list formats)
[ChangeLog][QtCore][QLocale] Data used for currency formats in several
locales and list patterns in some locales have changed due to now
parsing the CLDR data more faithfully.
Fixes: QTBUG-81344
Change-Id: I6b95c6c37db92df167153767c1b103becfb0ac98
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
CLDR's currency formats do have number system variation, so take it
into account. (The old xpathlite code clearly intended to do this, but
failed at it due to looking for the wrong component of an XPATH to
fix.) This changes the currency formats in use for
* all Dutch locales (because nl.xml lists a currency format for arab
before the one for latn, and they differ),
* Punjabi, Urdu - specifically pa_Guru_IN, ur_Arab_PK (both like
Dutch, arabext before latn; which is correct for pa_Arab_PK and
ur_Arab_IN),
* Sindi (whose over-ride of latn currency format we were using, where
we should be using arab's format, supplied by root's default),
* Tatar (which specifies a generic currency format, which we were
using, before one specific to latn, which we now use),
* Tongan (same as Dutch),
* Konkani (like Dutch, deva before latn) and
* several North African Arabic locales (whose default number system is
latn, rather than arab, but previously used arab's formats).
Task-number: QTBUG-79902
Change-Id: I18d8ec16bfd3a516d1bcd2f63bc7f7f15179a3f4
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This saves repetition of temporary-file manipulation code. In the
process, ensure that we tidy away temporary files on failure.
Moved a comment in qlocale.h to *outside* the re-written portion, to
save having to rewrite it every time. Added blank lines to separate
script data from country data in the generated output. Changed 0s in
one comment to zeros, to match another comment.
Isolated use of sys to the __main__ block.
Isolated use of enumdata to the new LocaleHeaderWriter class.
Modernised all the string-formatting I touched.
Task-number: QTBUG-81344
Change-Id: I5768e45d9a8ea23facc303b3dd8af8b3ccbf7ff2
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
|
| |
| |
| |
| |
| |
| | |
Change-Id: I890dd2b52c1b786db1081744c8ca343baba93de4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Extract the character in its proper unicode form and encode it in a
new single_character_data table of locale data. Record each entry as
the range within that table that encodes it. Also added an assertion
in the generator script to check that the digits CLDR gives us are a
contiguous sequence in increasing order, as has been assumed by the
C++ code for some time. Lots of number-formatting code now has to take
account of how wide the digits are.
This leaves nowhere for updateSystemPrivate() to record values read
from sys_locale->query(), so we must always consult that function when
accessing these members of the systemData() object. Various internal
users of these single-character fields need the system-or-CLDR value
rather than the raw CLDR value, so move QLocalePrivate's methods to
supply them down to QLocaleData and ensure they check for system
values, where appropriate first.
This allows us to finally support the Chakma language and script, for
whose number system UTF-16 needs surrogate pairs.
Costs 10.8 kB in added data, much of it due to adding two new locales
that need surrogates to represent digits.
[ChangeLog][QtCore][QLocale] Various QLocale methods that returned
single QChar values now return QString values to accommodate those
locales which need a surrogate pair to represent the (single
character) return value.
Fixes: QTBUG-69324
Fixes: QTBUG-81053
Change-Id: I481722d6f5ee266164f09031679a851dfa6e7839
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This enables us to make the sizes quint8 and benefit from the
resulting packing, making the locale data smaller. The sizes for long
month-name lists (which concatenate twelve names with semicolon as
separator) can overflow an 8-bit member, so use quint16 where needed.
Re-ordered the data in QLocaleData and QCalendarLocale. Now all
long-short(-narrow) families arise in that order; and any standalone
is grouped with the one of the same length. (This cost 20 bytes in the
date-format table, which optimises out more duplication if short is
before long, but the saving in the (smaller) time-format table more
than make up for it; and 20 bytes isn't worth the confusion that being
inconsistent in ordering might cause.)
At the same time, drop trailing semicolons from list entries (which
join various names with semicolon) as they're not needed: we know
where the end of the list is, because we know the size of the string
that results from concatenation. The code that parses such lists can
even correctly handle empty entries at the end.
Saves 26 kB of data in the compiled binaries.
Task-number: QTBUG-81053
Change-Id: If6ccc96a6910828817aa605d10fd814f567ae1e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Some entries in tables were sub-strings (e.g. prefixes) of others.
Since we store start-index and length (with no need for terminators),
any entry that appears as a sub-string of an earlier entry can be
recorded without making a separate copy of its content, just by
recording where it appeared as a sub-string of an earlier entry.
(Sadly this doesn't apply to month- or day-names and their
short-forms: for those, we store ';'-joined lists. Thus, although
each short-form is a prefix of its long-form, the short-form is stored
in a list with other short-forms; and this is not a prefix of the list
of matching long-forms.)
The savings are modest (780 bytes at present), but cost us nothing
except when running the python script that generates the data files
(it takes a little longer now), which usually only happens at a CLDR
update.
Change-Id: I05bdaa9283365707bac0190ae983b31f074dd6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Split a long line.
Use pythonic chained comparison to save some repetition.
Comment on a field not currently in actual use.
Say "zeros" rather than "0s" in one comment to match another.
Added a .h suffix to the main locale data tempfile to match the naming
of the tempfiles used for calendar data.
Simplify generation of the blank line between Language and Script; and
include a matching blank between Script and Country.
This adds one blank line to qlocale.h
Removed a stray space that misaligned locale data lines.
This produces a space-only change in the generated *_data_p.h files.
Change-Id: I974a9e8923c3dfd2178855d2cf1d6a5074e130b3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have long (since 4.5.1) coerced it to lower-case, for no readily
apparent, much less documented, reason. CLDR says most locales use an
upper-case E for this - let's actually use what CLDR says we should
use.
The code that matches the exponent separator was doing so
case-insensitively in any case; that needed adaptation now that the
separator's case isn't pre-determined; and, in any case, should have
been done using case-folding rather than upper-casing. In the process,
removed some spurious checks for "'e' or 'E'" in the result, since the
exponent separator is always represented by 'e' (and an 'e' might also
be present for the separate reason of its use as a beyond-decimal
digit representing fourteen).
[ChangeLog][QtCore][QLocale] QLocale::exponential() now preserves the
case of the CLDR source, where previously it was lower-cased.
Change-Id: Ic9ac02136cff79cb9f136d72141b5dbf54d9e0a6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Released on October 4th.
Adds Windows names for two time zones, Qyzylorda and Volgograd.
Added languages Chickasaw (cic), Muscogee (mus) and Silesian (szl).
Norwegian number formatting has flipped back to using colon rather
than dot as time separator; it's flipped back and forth over the last
several CLDR releases. The dot form is present as a variant, the
colon form was long given as the normal pattern, then went away; but
now it's back as a contributed draft and that's what we pick up.
The MS-Win time-zone ID script was iterating a dict, causing random
reshuffling when new entries are added. Fixed that by doing the
critical iteration in sorted order.
Omitted locales ccp_BD and ccp_IN due to QTBUG-69324.
Task-number: QTBUG-79418
Change-Id: I43869ee1810ecc1fe876523947ddcbcddf4e550a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
This includes byte array, string, char, unicode, locale, collation and
regular expressions.
Change-Id: I8b125fa52c8c513eb57a0f1298b91910e5a0d786
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|