| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At the Daylight Tme to Standard Time transition, the local time repeats
itself, i.e. 2am occurs twice. Qt's behavior when setting this using
the local time is ambiguous, as it depends on the system implementation
of mktime, which behaves differently on different platforms. Currently
this behavior remains undefined. When setting using an msecs or time_t
value however we can determine the correct instance to use and cache it
to ensure that any conversion back from local time to msecs is performed
consistantly on all platforms.
Note that caching this value will result in any calculations being wrong
should the system time zone change, or its rules change. This will be
fixed in Qt 5.3 when the system time zone change signal is implemented
and QDateTime switches to using QTimeZone instead of mktime to provide
consistnt behavior across platforms.
The QTimeZone spec does not require this fix as it already caches the
correct offset in setMSecsFromEpoch().
Change-Id: I799588db474e744a6d81e80f6a0442920569ebd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Add support to QDateTime for time zones using the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Add support for a new Qt::TimeZone
spec to be used with QTimeZone to define times in a specific
time zone.
Change-Id: I21bfa52a8ba8989b55bb74e025d1f2b2b623b2a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When Daylight Time transtion goes from Standard Time to Daylight Time
there is a "missing" hour, i.e. at 2am CET the clock goes forward to
3am. Currently QDateTime ignores this gap and considers the time to be
valid and able to be manipulated. This change respects the transition,
so any time set in the missing hour is considered invalid, and any date
maths returns valid results.
The validity in the current time zone needs to be checked every time
isValid() is called in case the system time zone has changed since the
last time it was checked. This is done by calling mktime to check the
returned result matches the expected result. This could be very
inefficient, but the returned offset value is cached each time so
mktime is not required to be called again within each method call,
effectively meaning mktime is called the same number of times by
each method. Note that this means any new methods added must be
careful to ensure either isValid() or refreshLocalTime() is called
first by any method needing to use the UTC value.
[ChangeLog][QtCore][QDateTime] The Standard Time to Daylight Time
transition for Qt::LocalTime is now handled correctly. Any date set
in the "missing" hour is now considered invalid. All date math results
that fall into the missing hour will be automatically adjusted to a
valid time in the following hour.
Change-Id: Ia652c8511b45df15f4917acf12403ec01a7f08e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change from storing the date and time as QDate and QTime to a serialised
msecs format. This format is a direct translation of the QDate and
QTime values, it is not the actual msecs since the Unix epoch. This
msecs format ensures we are always able to recreate the original QDate
and QTime values, but should still simplify the code and improve
performance.
Because we no longer store the explicit date and time we need to store
their isNull()/isValid() status separately.
The changes in storage results in the same memory footprint as before.
Note that this change does not optimize the code nor set out to fix the
known bugs, it only seeks to maintain the current behavior, although
some bugs are fixed implicitly. More bug fixes and optimizations will
follow.
[ChangeLog][Important Behavior Changes] The supported date range in
QDateTime has been reduced to about +/- 292 million years, the range
supported by the number of msecs since the Unix epoch of 1 Jan 1970
as stored in a qint64, and as able to be used in the
setMSecsSinceEpoch() and toMSecsSinceEpoch() methods.
Change-Id: I98804d8781909555d3313a3a7080eb8e70cb46ad
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change storing the spec from QDateTimePrivate::Spec to Qt::TimeSpec.
Remove the storage and use of the Daylight Status as it is almost
never set or used, and would be inaccurate if the tz were to change.
It will be replaced later with proper daylight transition support.
This simplifies the code and makes the msecs storage change easier.
Change-Id: I78a70905025d7eddf1c2dc6001f6b490e5a2b3b8
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A number of QDateTime functions directly use or modify the data stored
in the private, but future changes to store msecs and status make this
maintenance more complicated. Where possible simplify this code to use
the standard msecs functions, standard constructors, or public api
instead. This greatly simplifies the functions and the following msecs
storage code changes.
This is an intermim step towards storing the time in msecs. Some
functions will be slower as a result of this change, optimization
will take place after all the msecs changes are completed.
Note this also removes a test that used valid QDates outside the range
of msecs, this change in behavior will be documented in the final
mscs change.
Change-Id: I6ef710f24babc7024091010064082e9be0b5bbfe
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Not strictly needed yet, but helps to reduce the size of QDateTime and
make it easier to read a major re-write. Imposes separation of parser
which will be needed if we make QLocale always use the system backends,
after which only QDateTimeEdit widget will need the parser and it can
be moved there.
Change-Id: I6a5e9a3edf6fe8ff2340af6afecd8ba4bfde9dd4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
|
| |
|
|
|
|
|
|
| |
Currently, using QDate::maxJd() in tests will fail. This patch changes
some ints to qint64s to prevent overflows where necessary.
Change-Id: I61ebf8f233411a7544689fd5bfa9c3abee54e933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
|
|
|
| |
Change-Id: Ic804938fc352291d011800d21e549c10acac66fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
|
| |
|
|
|
|
|
|
| |
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
When 2 (February) is entered as the month for (e.g.) 31/Jan/2000 (which
is following the format: "dd/MMM/yyyy"), the day is corrected to 29 but
displayed as its numerical value instead of its short (or long) name.
Task-number: QTBUG-27036 QTBUG-19091
Change-Id: I558ee13b224707d22b26c2ec2c045f96118bd5a1
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a QDateEdit has its display format set to "yyyy/MM/dd", its day
set to 31 and its month set to 2, it will display 291 as the day until
the cursor is moved or the focus changed. This is because
QDateTimeParser::parse calls sectionSize() for the day section, which
will sometimes return an incorrect size. There are also other display
formats affected by this bug (e.g. long day names).
For example, (in the context of sectionSize()) when text is
"2000/01/31" and displayText() is "2000/2/31", there is a difference
between displayText() and text - text is the previous value and
displayText() is the new value. The size difference is always due to
leading zeroes.
This patch makes QDateTimeParser keep track of the quantity of zeroes
added to each section and then factors this value into the result of
sectionSize() if there is a size difference between text and
displayText().
Task-number: QTBUG-26847
Change-Id: I3823cc41167ec920f742cb6a20d39fc5f433c915
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
|
| |
|
|
|
|
|
|
|
| |
It's useful to know what this member variable is used for, since there
is very little documentation for QDateTimeParser, which makes
maintenance yucky.
Change-Id: I9ecf5aa5ef0b5d778ceb858c323e3bab1ebaa7dc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
|
| |
|
|
|
|
|
|
|
|
| |
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
| |
|
|
|
| |
Change-Id: I9abdc674bcfa7bb38ce27c5213c5a672f59e63d5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
|
| |
|
|
|
|
|
| |
Replace Nokia contact email address with Qt Project website.
Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
| |
|
|
|
| |
Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
| |
|
|
|
|
|
|
|
|
| |
It is better to use QSharedData which is a common interface for ref
counting.
Change-Id: I990476d6763901bf383f241bce16fe26665b021c
Reviewed-on: http://codereview.qt.nokia.com/1439
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
|
| |
|
|
|
|
|
| |
Updated version of LGPL and FDL licenseheaders.
Apply release phase licenseheaders for all source files.
Reviewed-by: Trust Me
|
|
|
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
|
