summaryrefslogtreecommitdiffstats
path: root/src/gui/text
Commit message (Collapse)AuthorAgeFilesLines
* QTextMarkdownImporter: don't keep heading level on following list itemShawn Rutledge2019-05-242-49/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When reading a document like # heading - list item and then re-writing it, it turned into # heading - # list item because QTextCursor::insertList() simply calls QTextCursor::insertBlock(), thus inheriting block format from the previous block, without an opportunity to explicitly define the block format. So be more consistent: use QTextMarkdownImporter::insertBlock() for blocks inside list items too. Now it fully defines blockFormat first, then inserts the block, and then adds it to the current list only when the "paragraph" is actually the list item's text (but not when it's a continuation paragraph). Also, be prepared for applying and removing block markers to arbitrary blocks, just in case (they might be useful for block quotes, for example). Change-Id: I391820af9b65e75abce12abab45d2477c49c86ac Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* Support clicking to toggle checkboxes in QTextEditShawn Rutledge2019-05-242-0/+32
| | | | | | | | | | | | | | | | | | | Add QAbstractTextDocumentLayout::markerAt(pos) for hit testing. (Qt Quick TextEdit needs it too.) Finds out whether the position corresponds to a marker on a paragraph. I.e. it finds checkboxes in GitHub-flavored markdown. This enables editor classes to toggle checkboxes by clicking them. Use it in QTextEdit to add the checkbox toggling feature. Also show the "pointing finger" cursor when hovering a toggleable checkbox. Change-Id: I036c967ab45e14c836272eac2cc7c7d652543c89 Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* QTextDocumentLayout: Avoid table border drawing artifactsNils Jeisecke2017-09-071-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As borders are always painted for single cells any rounding errors that occur when mapping from fixed point numbers to integers during raster painting will cause ugly drawing artifacts like extra pixels between cells or borders that overlap. To avoid this the following values are being rounded: - table offset - column positions and widths - row positions and cell heights For the column positions and widths the distribution constraints (total table width) are respected. Task-number: QTBUG-43589 Change-Id: I6308c113f8f9be3db8e9267629f26b5d65d2d7c7 Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* Fix gui build without feature.regularexpressionTasuku Suzuki2019-05-222-1/+15
| | | | | | | | | | | Change-Id: Id27fc81af8d2b0355b186540f41d75a9c8d7c7f3 Reviewed-by: David Faure <david.faure@kdab.com>
* Merge remote-tracking branch 'origin/5.13' into devFriedemann Kleint2019-05-271-19/+69
|\ | | | | | | Change-Id: Ia279fc4a8226626041c772902a07b2f90f37b53b
| * Merge remote-tracking branch 'origin/5.12' into 5.13Friedemann Kleint2019-05-271-19/+69
| |\ | | | | | | | | | Change-Id: Iaf6bd52972b562b9c91d9e93a988d26b0eb9d3b4
| | * Write an anchor-type attribute when embedding images in an ODF documentAndrew den Exter2019-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Without this some readers will fail to display the image or position the image at the start of a paragraph rather than inline. Change-Id: I2b9257e3193e5e68eb20112017a0c23be1d06cb0 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
| | * Avoid re-encoding embedded images when writing an ODF fileAndrew den Exter2019-05-131-19/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | If an embedded image is already encodeded as an png or jpg write the data as is instead of decoding to a QImage and re-encoding as a new image. Change-Id: I479ae1fddbf59900a500497dd1bdf7449c21f273 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* | | Add documentation for the QTextBlockFormat::marker propertyShawn Rutledge2019-05-231-0/+44
| | | | | | | | | | | | | | | | | | | | | Amends 65314b6ce88cdbb28a22be0cab9856ec9bc9604b. Change-Id: I8f69030accb948055b0081f8a4f1daafbac824ce Reviewed-by: Paul Wicking <paul.wicking@qt.io>
* | | Fix font matching of typographic families on WindowsEskil Abrahamsen Blomfeldt2019-05-233-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 9204b8c31ea1b5f0c05870c5b5d74c33b1a4f622 broke font matching on Windows. This was then attempted fixed by bcd2fa484a4fe93e77743195d7f72cce9e580d43, but this caused an infinite recursion for some cases, so it was reverted again by 9d1905da9c59e9062a157199c81c076efc20eb28. The original issue was that if we populate a specific face of a family, such as "Arial Black", then the typographic/preferred name will be detected as "Arial" and this family will be set as populated=true, even though we have not yet registered any additional subfamilies. In this case, we need to call populateFamily() for the typographic family name to ensure we get Windows to enumerate all the subfamilies in that family before it sets it as populated=true. But this broke for some fonts where the font naming was unconventional. In particular, "Yu Gothic" would have its Japanese name as the typographic name, and there would be no font in the system where the old-style font family name matched the typographic name. In that case we would go into a loop where we would try populating "<Japanese font name>", Windows would translate this to "Yu Gothic", we would translate it back to "<Japanese font name>", ad infinitum. In order to avoid the infinite recursion, we add a recursion guard as well, ensuring that we never call populateFamily() for the main family we are currently populating. [ChangeLog][Windows][Fonts] Fixed a bug where it would be impossible to request different faces of a font family after a specific type face has been in use. Task-number: QTBUG-74748 Task-number: QTBUG-74983 Change-Id: Ibe6239f67c45d67ebf75947c8f231cfa177e347f Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* | | Fix qdoc warnings for Qt 5.14Friedemann Kleint2019-05-212-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | src/corelib/tools/qstring.cpp:9505:clang found diagnostics parsing \fn int QLatin1String::indexOf(QLatin1String l1, int from Qt::CaseSensitivity cs) const error: expected ')' error: out-of-line definition of 'indexOf' does not match any declaration in 'QLatin1String' src/corelib/tools/qstringview.cpp:723:clang found diagnostics parsing \fn qsizetype QStringView::indexOf(QLatin1String l1, qsizetype from Qt::CaseSensitivity cs) const error: expected ')' error: out-of-line definition of 'indexOf' does not match any declaration in 'QStringView' src/corelib/tools/qstringview.cpp:822:Unknown command '\t' src/corelib/tools/qstringview.cpp:825:Unknown command '\t' src/corelib/tools/qstringview.cpp:826:Unknown command '\t' src/corelib/tools/qstringview.cpp:831:Unknown command '\t' src/corelib/global/qnamespace.qdoc:2448:Undocumented enum item 'MarkdownText' in Qt::TextFormat src/corelib/tools/qstringmatcher.cpp:183:No such parameter 'pattern' in QStringMatcher::QStringMatcher() src/network/ssl/qsslerror.cpp:58:Undocumented enum item 'CertificateStatusUnknown' in QSslError::SslError src/gui/kernel/qevent.cpp:5321:Undocumented parameter 'screenOrientation' in QScreenOrientationChangeEvent::QScreenOrientationChangeEvent() src/gui/kernel/qevent.cpp:5321:Undocumented parameter 'screen' in QScreenOrientationChangeEvent::QScreenOrientationChangeEvent() src/gui/kernel/qevent.cpp:5321:No such parameter 'orientation' in QScreenOrientationChangeEvent::QScreenOrientationChangeEvent() src/gui/text/qtextformat.cpp:532:Undocumented enum item 'BlockCodeLanguage' in QTextFormat::Property src/gui/text/qtextformat.cpp:532:Undocumented enum item 'BlockQuoteLevel' in QTextFormat::Property src/gui/text/qtextformat.cpp:532:Undocumented enum item 'BlockMarker' in QTextFormat::Property src/gui/text/qtextdocument.cpp:3294:Undocumented parameter 'features' in QTextDocument::toMarkdown() src/gui/painting/qcolorspace.cpp:659:Undocumented parameter 'colorSpace1' in QColorSpace::operator!=() src/gui/painting/qcolorspace.cpp:659:Undocumented parameter 'colorSpace2' in QColorSpace::operator!=() src/gui/painting/qcolorspace.cpp:659:No such parameter 'colorspace1' in QColorSpace::operator!=() src/gui/painting/qcolorspace.cpp:659:No such parameter 'colorspace2' in QColorSpace::operator!=() examples/widgets/doc/src/icons.qdoc:269:Command '\snippet (//! [43])' failed at end of file 'widgets/icons/iconpreviewarea.cpp' src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogRetryButton' in QStyle::StandardPixmap src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogYesToAllButton' in QStyle::StandardPixmap src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogIgnoreButton' in QStyle::StandardPixmap src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogNoToAllButton' in QStyle::StandardPixmap src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogAbortButton' in QStyle::StandardPixmap src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_RestoreDefaultsButton' in QStyle::StandardPixmap src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogSaveAllButton' in QStyle::StandardPixmap src/testlib/qtestcase.qdoc:439:Undocumented parameter 'TestClass' in QTest::QTEST_HIGHDPI_SCALING_MAIN src/testlib/qtestcase.qdoc:452:Undocumented parameter 'TestClass' in QTest::QTEST_NO_HIGHDPI_SCALING_MAIN Change-Id: Ib0e9bf81c5caaa6b1fc644ac92085af47c600e0e Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io> Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru> Reviewed-by: Paul Wicking <paul.wicking@qt.io>
* | | QtGui: get rid of the last Java-style iteratorMarc Mutz2019-05-211-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial. Java-style iterators are going to be deprecated. Change-Id: Ie94658be988cc095fb3b05d0d4ef6e7e3bf9a2af Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
* | | QFontMetricsF: add noexceptGiuseppe D'Angelo2019-05-151-2/+2
| | | | | | | | | | | | | | | | | | Change-Id: I0b32ff72f22c4014441a86c135927e52ddc999cd Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* | | QFontEngine: replace QLinkedList with std::listMarc Mutz2019-05-142-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object is never copied, so there's no point in using a cow'ed list implementation. Also port two explicit-iterator loops to ranged-for, as one is necessary (because of constBegin()) and the other is for consistency. Change-Id: Ia7f080060d6b675a76b55d197af08161389082a9 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* | | Merge remote-tracking branch 'origin/5.13' into devLiang Qi2019-05-133-35/+24
|\| | | | | | | | | | | | | | | | | | | | Conflicts: src/corelib/tools/qstring.cpp Change-Id: I81dbf90fc936c9bf08197baefa071117bddb1c63
| * | Merge remote-tracking branch 'origin/5.12' into 5.13Qt Forward Merge Bot2019-05-092-33/+22
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: src/corelib/tools/qlocale_data_p.h (Regenerated by running the scripts in util/local_database/) src/gui/opengl/qopengltextureuploader.cpp Done-With: Edward Welbourne <edward.welbourne@qt.io> Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io> Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
| | * Fix QTextEngine::shapeText casing of surrogate pairsJüri Valdmann2019-05-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The high part was not copied to output. Fixes: QTBUG-75559 Change-Id: I9350e52d256510f52b3fcc0015bf879d2c609532 Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
| | * Use "monospace" as fallback system FixedFont in KDE theme; loggingShawn Rutledge2019-05-071-32/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also de-duplicate the "monospace" string in qgenericunixthemes.cpp, and add tst_QFontDatabase::systemFixedFont() to verify that QFontDatabase::systemFont(QFontDatabase::FixedFont) really returns a monospace font across platforms. Replace commented-out qDebug()s with qt.text.font.match and qt.text.font.db logging categories to troubleshoot when the test fails (among other uses). Add qt.qpa.fonts logging category to unix themes to show default system and fixed fonts (font engines on other platforms are already using this category). Fixes: QTBUG-54623 Change-Id: I2aa62b8c783d9ddb591a5e06e8df85c4af5bcb0c Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
| * | Doc: replace even more null/0/nullptr with \nullptr macroChristian Ehrlicher2019-05-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Try to replace all wordings like '.. to 0' with '.. to \nullptr'. Also checked for 'null pointer' and similar. Change-Id: I73341f59ba51e0798e816a8b1a532c7c7374b74a Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* | | Markdown: blockquotes, code blocks, and generalized nestingShawn Rutledge2019-05-086-42/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Can now detect nested quotes and code blocks inside quotes, and can rewrite the markdown too. QTextHtmlParser sets hard-coded left and right margins, so we need to do the same to be able to read HTML and write markdown, or vice-versa, and to ensure that all views (QTextEdit, QTextBrowser, QML Text etc.) will render it with margins. But now we add a semantic memory too: BlockQuoteLevel is similar to HeadingLevel, which was added in 310daae53926628f80c08e4415b94b90ad525c8f to preserve H1..H6 heading levels, because detecting it via font size didn't make sense in QTextMarkdownWriter. Likewise detecting quote level by its margins didn't make sense; markdown supports nesting quotes; and indenting nested quotes via 40 pixels may be a bit too much, so we should consider it subject to change (and perhaps be able to change it via CSS later on). Since we're adding BlockQuoteLevel and depending on it in QTextMarkdownWriter, it's necessary to set it in QTextHtmlParser to enable HTML->markdown conversion. (But so far, nested blockquotes in HTML are not supported.) Quotes (and nested quotes) can contain indented code blocks, but it seems the reverse is not true (according to https://spec.commonmark.org/0.29/#example-201 ) Quotes can contain fenced code blocks. Quotes can contain lists. Nested lists can be interrupted with nested code blocks and nested quotes. So far the writer assumes all code blocks are the indented type. It will be necessary to add another attribute to remember whether the code block is indented or fenced (assuming that's necessary). Fenced code blocks would work better for writing inside block quotes and list items because the fence is less ambiguous than the indent. Postponing cursor->insertBlock() as long as possible helps with nesting. cursor->insertBlock() needs to be done "just in time" before inserting text that will go in the block. The block and char formats aren't necessarily known until that time. When a nested block (such as a nested quote) ends, the context reverts to the previous block format, which then needs to be re-determined and set before we insert text into the outer block; but if no text will be inserted, no new block is necessary. But we can't use QTextBlockFormat itself as storage, because for some reason bullets become very "sticky" and it becomes impossible to have plain continuation paragraphs inside list items: they all get bullets. Somehow QTextBlockFormat remembers, if we copy it. But we can create a new one each time and it's OK. Change-Id: Icd0529eb90d2b6a3cb57f0104bf78a7be81ede52 Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Change QTextMarkdownWriter to pass by const pointer and QAIMShawn Rutledge2019-05-084-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | - QObjects are always passed by pointer not by reference, by convention - writeTable() takes QAIM rather than QATM to make testing via QStandardItemModel possible in the future Change-Id: I5bc6b8cd9709da4fb5d57d98fa22e0cb34360944 Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Markdown: deal with horizontal rules (thematic breaks)Shawn Rutledge2019-05-082-1/+5
| | | | | | | | | | | | | | | Change-Id: I14d4bcfe1a6c3bd87d1328f0abb81b2138545e4e Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Markdown: fix several issues with lists and continuationsShawn Rutledge2019-05-084-27/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Importer fixes: - the first list item after a heading doesn't keep the heading font - the first text fragment after a bullet is the bullet text, not a separate paragraph - detect continuation lines and append to the list item text - detect continuation paragraphs and indent them properly - indent nested list items properly - add a test for QTextMarkdownImporter Writer fixes: - after bullet items, continuation lines and paragraphs are indented - indentation of continuations isn't affected by checkboxes - add extra newlines between list items in "loose" lists - avoid writing triple newlines - enhance the test for QTextMarkdownWriter Change-Id: Ib1dda514832f6dc0cdad177aa9a423a7038ac8c6 Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Remove 3rdparty include from QTextMarkdownImporter header fileShawn Rutledge2019-05-082-47/+47
| | | | | | | | | | | | | | | | | | | | | | | | It's a private header; but to be able to use it in a test, it has to be as clean as a public header. Change-Id: I868372406e62acc24051a6523fee89bb911a61f9 Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Deprecate conversion functions between QList and QSetLars Knoll2019-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Users should use range constructors instead to do the conversion. Keep conversion methods between QList and QVector as these will turn into a no-op in Qt 6, whereas forcing people to use range constructors would lead to deep copies of the data. Change-Id: Id9fc9e4d007044e019826da523e8418857c91283 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* | | Merge remote-tracking branch 'origin/5.13' into devLiang Qi2019-05-073-3/+6
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: src/corelib/kernel/qobject.cpp src/corelib/kernel/qvariant.h src/corelib/tools/qlist.h Done-With: Milian Wolff <milian.wolff@kdab.com> Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io> Change-Id: I6803f7239aa137a51a7467fab7cc7a01302a848d
| * | Merge remote-tracking branch 'origin/5.12' into 5.13Qt Forward Merge Bot2019-05-062-3/+5
| |\| | | | | | | | | | Change-Id: Iaad9509712c848ed42ada2c25065162a6fc5a930
| | * fix compilation with various -no-feature-* optionsNick Shaforostov2019-05-052-3/+5
| | | | | | | | | | | | | | | Change-Id: Ic1975db497613e3efe50be4246c167efe10d8e31 Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
| * | Fix -Wdeprecated-copy warningsAllan Sandfeld Jensen2019-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implicit copy constructors or methods are considered deprecated for classes that has one of the two or a destructor. The warning is enabled with -Wextra in gcc 9 Change-Id: Ic9be654f2a142fb186a4d5a7d6b4f7d6f4e611d8 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Prefix QTextStream operators with Qt::Lars Knoll2019-05-031-3/+3
| | | | | | | | | | | | | | | Change-Id: I128769cb78abb8168f0bf29cef8c693073793ced Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* | | QTextMarkdownImporter: Fix deprecation warningFriedemann Kleint2019-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use QTextCharFormat::setAnchorNames(), fixing: text/qtextmarkdownimporter.cpp:322:36: warning: 'void QTextCharFormat::setAnchorName(const QString&)' is deprecated: Use setAnchorNames() instead [-Wdeprecated-declarations] Amends 65314b6ce88cdbb28a22be0cab9856ec9bc9604b. Task-number: QTBUG-72349 Change-Id: I7f909d1fcc5c4045c738b5a5c491b2ac1de6eac5 Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* | | Prefix textstream operators with Qt::Lars Knoll2019-05-023-8/+8
| | | | | | | | | | | | | | | | | | | | | As the non prefixed variants are deprecated Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* | | Add QTextMarkdownWriter::writeTable(QAbstractTableModel)Shawn Rutledge2019-05-022-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides the ability to write live data from a table to Markdown, which can be useful to load it into a text document or a wiki. But so far QTextMarkdownWriter is still a private class, intended to be used experimentally from QtQuick and perhaps later exposed in other ways. Change-Id: I0de4673987e4172178604e49b5a024a05d4486ba Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
* | | Render markdown task lists (checkboxes instead of bullets) in QTextEditShawn Rutledge2019-05-021-6/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Checkboxes are right-aligned with any bullets that are in the same QTextList so that there is enough space to make them larger than bullets. But hopefully mixing bullets and checkboxes will be a rarely-used feature. Change-Id: I28e274d1f7883aa093df29eb4988e99641e87a71 Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Remove handling of missing Q_COMPILER_RVALUE_REFSAllan Sandfeld Jensen2019-05-016-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove remaining handling of missing support for rvalue refs. Change-Id: I78bab8bccfeeb9c76f464f345874364a37e4840a Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Add QTextMarkdownWriter, QTextEdit::markdown property etc.Shawn Rutledge2019-05-016-3/+506
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A QTextDocument can now be written out in Markdown format. - Add the QTextMarkdownWriter as a private class for now - Add QTextDocument::toMarkdown() - QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown") is called or if the file suffix is .md or .mkd - Add QTextEdit::toMarkdown() and the markdown property [ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now a supported format for reading into and writing from QTextDocument. Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Merge remote-tracking branch 'origin/5.13' into devQt Forward Merge Bot2019-04-291-1/+4
|\| | | | | | | | | | | Change-Id: Ic712e8a84b01b212bb1121d7a2c9b85e0d2da9da
| * | Merge remote-tracking branch 'origin/5.12' into 5.13Qt Forward Merge Bot2019-04-281-1/+4
| |\| | | | | | | | | | Change-Id: Ibce9bfef928ce39070183c488ce86ae32e5ea705
| | * Fix page breaking with large imagesLars Knoll2019-04-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't go into an infinite loop breaking pages, when an image is about as large as the page. Correctly take top and bottom margins into account when calculating whether the image could fit on one page. Amends change 416b4cf685030114837bd375664fd12047895a62. Fixes: QTBUG-73730 Change-Id: Id311ddf05510be3b1d131702f4e17025a9861e58 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* | | QTextMarkdownImporter: insert list items into the correct listShawn Rutledge2019-04-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a bug when handling situations like 1. first 1) subfirst 2. second It was always inserting items into the list where the cursor already was, but it needs to insert the "second" list item into the list which is currently the top of m_listStack. Change-Id: Id0899032efafb2e2b9e7c45a6fb9f2c5221fc4df Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Fix -Wc++11-narrowing error in qtextmarkdownimporterMårten Nordheim2019-04-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | error: non-constant-expression cannot be narrowed from type 'qt::QFlags::Int' (aka 'int') to 'unsigned int' in initializer list [-Wc++11-narrowing] Change-Id: Ic634a98d29a108741d41955da1fbf2c986e4a943 Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* | | Add QTextMarkdownImporterShawn Rutledge2019-04-176-2/+629
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides the ability to read from a Markdown string or file into a QTextDocument, such that the formatting will be recognized and can be rendered. - Add QTextDocument::setMarkdown(QString) - Add QTextEdit::setMarkdown(QString) - Add TextFormat::MarkdownText - QWidgetTextControl::setContent() calls QTextDocument::setMarkdown() if that's the format Fixes: QTBUG-72349 Change-Id: Ief2ad71bf840666c64145d58e9ca71d05fad5659 Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com> Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* | | Revert "Fix font matching of typographic families on Windows"Eskil Abrahamsen Blomfeldt2019-04-093-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit bcd2fa484a4fe93e77743195d7f72cce9e580d43. There was a report that this caused infinite recursion on some systems, so we revert it for now and re-add it later when the issue has been resolved. Task-number: QTBUG-74983 Change-Id: I747e0437232d72d7a87eb602b10fa09c7130ce8f Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* | | Replace Q_DECL_NOEXCEPT with noexcept in QtGuiAllan Sandfeld Jensen2019-04-0515-38/+38
| | | | | | | | | | | | | | | Change-Id: I43803b88fea8083782d73ce157c466b022208740 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Merge "Merge remote-tracking branch 'origin/5.13' into dev" into ↵Qt Forward Merge Bot2019-04-046-58/+75
|\ \ \ | | | | | | | | | | | | refs/staging/dev
| * | | Merge remote-tracking branch 'origin/5.13' into devQt Forward Merge Bot2019-04-051-0/+23
| |\| | | | | | | | | | | | | | Change-Id: If4974bbf0a166de244dd57cb71b05fa28bcc34ce
| | * | Merge remote-tracking branch 'origin/5.12' into 5.13Qt Forward Merge Bot2019-04-041-0/+23
| | |\| | | | | | | | | | | | | Change-Id: Ia7328524f2cd9d5995ac8705f0fe0bf570b2e831
| | | * Add a clarification about "characters" to QTextCursor docsEskil Abrahamsen Blomfeldt2019-04-021-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function name QTextCursor::positionInBlock() may give users the idea that it can be displayed to the user as the visual position of the cursor in the current block. This becomes confusing with some writing systems, since e.g. a surrogate pair will count as two characters while only representing a single visual grapheme. Since it is an side effect of the encoding that will be unexpected to many, and since it also touches on some linguistic complexities, we add a note to the documentation to make users aware of the consideration needed. Task-number: QTBUG-74725 Change-Id: Iba28ba8a6ad07ee38dbb7e6a5a4b68c93d4da76a Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com> Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com> Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
| * | | Merge remote-tracking branch 'origin/5.13' into devLiang Qi2019-03-311-1/+1
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: src/corelib/configure.json Change-Id: I93ac67f3bf4844bc7c691183e94bceb922b7b919
| | * | Merge remote-tracking branch 'origin/5.12' into 5.13Friedemann Kleint2019-03-261-1/+1
| | |\| | | | | | | | | | | | | Change-Id: I71cc71881fb638e207d83a8733bad8f267701c0f
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-10 05:55:42 +0000