| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Without TLS (and thus ALPN/NPN negotiation) HTTP/2 requires
a protocol upgrade procedure, as described in RFC 7540, 3.2.
We start as HTTP/1.1 (and thus we create QHttpProtocolHandler first),
augmenting the headers we send with 'Upgrade: h2c'. In case
we receive HTTP/1.1 response with status code 101 ('Switching
Protocols'), we continue as HTTP/2 session, creating QHttp2ProtocolHandler
and pretending the first request we sent was HTTP/2 request
on a real HTTP/2 stream. If the first response is something different
from 101, we continue as HTTP/1.1. This change also required
auto-test update: our toy-server now has to respond to
the initial HTTP/1.1 request on a platform without ALPN/NPN.
As a bonus a subtle flakyness in 'goaway' auto-test went
away (well, it was fixed).
[ChangeLog][QtNetwork][HTTP/2] In case of clear text HTTP/2 we
now initiate a required protocol upgrade procedure instead of
'H2Direct' connection.
Task-number: QTBUG-61397
Change-Id: I573fa304fdaf661490159037dc47775d97c8ea5b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Both SPDY and HTTP/2 work with a single qhttpnetworkchannel (and this means one
socket per qhttpnetworkconnection). Normally, HTTP/1.1 connection is using up to 6
channels/sockets though. At the moment a failure to negotiate SPDY/HTTP/2 leaves us
with a downgraded HTTP/1.1 connection (with only one channel vs. default 6).
Since we initialize channels (and establish connections) in a 'lazy' manner
it's ok to pre-allocate all 6 channels and then either use 1 (if SPDY/HTTP/2
indeed was negotiated) or switch back to 6 in case of failure.
Change-Id: Ia6c3061463c4d634aaed05ce0dde47bfb5e24dd8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/gui/image/qpixmap.cpp
src/widgets/kernel/qformlayout.cpp
Change-Id: I8a8391a202adf7f18464a22ddf0a6c4974eab692
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/network/access/qhttpnetworkconnection.cpp
src/network/access/qhttpnetworkconnection_p.h
Change-Id: I11f8641ef482efa8cee1b79977d19cc3182814b4
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In some cases, when QNetworkReply::encrypted is emitted,
QNetworkReply::sslConfiguration is not yet initialized, in particular
certificate chain is empty, which breaks the documented usage of
'encrypted' to perform additional checks on certificate chain.
It looks to be caused by the fact that QHttpNetworkReply is originally
associated with 0th QHttpNetworkConnectionChannel, and this association
is not updated if HTTP pipelining is not used. Therefore, a reply on
channel >0 might arrive before reply on channel 0, and then using ssl
configuration from channel 0, which not made it through handshake, is
not usable.
Task-number: QTBUG-49554
Change-Id: Ie5d4b5a0c503d5bdc44761ce8581f6ffe4e3bac2
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On Windows, qsslcontext_openssl_p.h pulls in an unsanitized
windows.h, causing the infamous min/max macros to be defined,
requiring a #define NOMINMAX in qhttp2protocolhandler.cpp.
This in turn breaks the MinGW developer build since that has
NOMINMAX globally defined:
access\qhttp2protocolhandler.cpp:40:0: error: "NOMINMAX" redefined [-Werror]
Remove the include, adding missing forward declarations and include
directives to the source files.
Change-Id: Ic1c2c711d87599b15ad6e2d87eae7153a44ace47
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add HTTP2 support in QNAM - QHttp2ProtocolHandler + aux. classes.
[ChangeLog][QtNetwork] Added support for HTTP/2 protocol
Task-number: QTBUG-50956
Change-Id: I3a119cfbb1fb3118d9003225f5e54b46ae2829b6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The new modular configuration system requires one global
header per module, that is included by all other files in
this module.
That header will later on #include the configuration file
for Qt Network. For now it defines the Q_NETWORK_EXPORT
macro for this library.
Change-Id: I9c45d425baf881c431ed71fd457c7feb2c123855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For CoW types, prefer const methods to avoid needless detach()ing.
Mark predictNextRequest() as const, because this method
does not modify the object.
Change-Id: Ic94e2b31445ece46ab1423bf5b5f4e66d9a5b6ca
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
|
|/
|
|
|
| |
Change-Id: I7bea3e03bff6f424b02335476211dd466ce4d720
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
|
|
|
|
|
|
|
|
|
| |
Fixes unnecessary indirect return value and deprecated construction
of QString from QByteArray.
Change-Id: I4b654348285923ac1df39fc03784175ad6acb674
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds support for following HTTP redirect responses on a per
request basis.
This behavior is disabled by default. It can be switched on by
setting the QNetworkRequest::FollowRedirectAttribute to true.
2 new error codes have been added to QNetworkReply:
* TooManyRedirectsError: Set when the number of redirects exceed a
given value set by the user (defaults to 50 if not set)
* UnsecureRedirectError: Set when we are redirecting from a 'https'
to 'http' protocol.
Test cases for the following scenarios:
* Single HTTP redirect using local test server
* Changing max-redirects
* Testing all redirect related error scenarios
The next commit will extend this feature at a QNAM level.
Task-number: QTBUG-8232
Change-Id: If9e28ad12bad08bcdc5bc511b1cd59dc9d8150f0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When sending a second request with implied credentials the connection
used may be cached as a connection without credentials, and thereby
incorrectly reused later for other connections with different implied
credentials.
This patch updates the credentials a cached http-connection is using
before sending a request on it.
Task-number: QTBUG-39456
Change-Id: I1609234136a89c32e00432a67720cd62a73a488a
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
|
|
|
|
|
|
|
|
|
| |
- Renamed LICENSE.LGPL to LICENSE.LGPLv21
- Added LICENSE.LGPLv3
- Removed LICENSE.GPL
Change-Id: Iec3406e3eb3f133be549092015cefe33d259a3f2
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
|
|
|
|
|
|
|
|
|
|
| |
The change creates a stub implementation for WinRT, adding the needed
files and classes to build SSL support on that platform.
Task-number: QTBUG-37497
Change-Id: Idc3e8aa91c5eb8a938705f2385d1074fe6c1d83e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to prepare the addition of WinRT and iOS (SecureTransport)
implementations of SSL the structure of some SSL files has to be
redone. Parts of certificate that probably can be reused by other
ports stayed in qsslcertificate.cpp while other parts were moved
to qsslcertificate_openssl.cpp. qsslcontext, qsslkey and qsslsocket
were suffixed by _openssl to show that these are pure openssl
implementations.
Change-Id: I7b022dec49759f882274999c0991bf95788f2a3a
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
| |
Re-order the constructor parameters for QHttpNetworkConnection to be consistent with the #ifndef version.
Change-Id: Icd8be4406ff549d468e06d635fac2ddc34826b1c
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
|
|
|
| |
... to defer the decision which protocol will be used on a specific
channel. This is to allow using the SPDY protocol instead of HTTP (to
be implemented in a later commit); which protocol will be used can
only be decided after the SSL handshake.
Change-Id: I6b538320668fe4994438f0095ecdc445677cf0a6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit f30641a7 is has been possible to issue more than one host
lookup request per HttpNetworkConnection. If the result was both an
IPv4 and IPv6 address, and we get a second similar DNS reply, we
end up triggering the assert in startNetworkLayerStateLookup().
This patch splits the InProgress state to HostLookupPending and the state
of trying both IPv4 and IPv6. This makes it possible to ignore any new DNS
replies received after the first succesfull one.
Change-Id: I0b8d6b1582fdaed69dde5926019b60bb0cbd580d
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Each pair of (normal request, preconnect request) requires only one
socket. E.g. if there is 1 preconnect request in-flight and 2 normal
requests, we need only 2 sockets in total, and not 3.
Therefore, we need to keep track of whether a request is
preconnecting or a normal one.
Task-number: QTBUG-31594
Change-Id: If92ccc35abadfa6090d64ee92bd466615909c94c
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
|
| |
This improves performance since a network round trip can be avoided.
Change-Id: I1aaff7e48ef9638cb137de0f43942c3a4dd2884a
Initial-patch-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
| |
Change-Id: Ic804938fc352291d011800d21e549c10acac66fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
|
|
|
|
|
|
|
|
| |
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
|
|
|
|
|
|
|
|
|
| |
Make C++ class constructors that can be used with only one
required argument 'explicit' to minimize wrong use of the class.
Change-Id: I12ad5b6eb1794108c6b7464a2573e84068733b03
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With Happy Eyeballs we will connect one IPv4 and one IPv6 channel and
pick the network layer depending on which connects first. When the
first channel is connected we can close the other one.
Before this we let the other connection finish connecting and then
closed it. This will close the other one as soon as the first one
is connected.
Change-Id: Ib2ab3f949704fd39dc0584bd31b9bcaf75ce35f7
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
|
|
|
|
|
|
|
|
| |
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
|
|
|
| |
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
|
|
| |
Replace Nokia contact email address with Qt Project website.
Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
| |
Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of always delaying IPv4 when we have both Ipv4 and IPv6 we
should use the order we get from getaddrinfo to descide which one
that should be delayed.
Task-number: QTBUG-23066
Change-Id: Ibe8c4d7000abd6e57fe8c6afac8a4a843e17ff27
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
|
|
|
|
|
|
|
|
|
| |
Incase we have both IPv4 and IPv6 available after the host lookup
we should delay the connection attempt to IPv4.
Task-number: QTBUG-23066
Change-Id: I8c0177cf125c9daae314ada73cacef790a39b856
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
|
|
|
|
|
|
|
| |
Change-Id: I6b6d86097074a12c9c4e3d22fe61a6b962ffa21e
Reviewed-on: http://codereview.qt-project.org/5627
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This eliminates some code (header parsing) that can be done by
zlib already.
Add support for 'deflate' encoding.
Also do less memory copying while uncompressing.
Change-Id: I94de21e3c58b904dd91d004c375ed8cbea56cb0b
Task-Number: QTBUG-13191
Reviewed-on: http://codereview.qt.nokia.com/1314
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Markus Goetz
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the cases where a DNS lookup will give you both an IPv4 and IPv6
address, this will start two connection channels at the same time.
One trying to connect using IPv4 and one on IPv6. This is done so
that we can use the fastest one for the connection. To do this we
have to do the hostlookup in the connection. The result is then
in the cache for the individual socket so it will not need to do
another lookup.
Task-number: QTBUG-16458
Change-Id: I806c20168d9c5edc2831b80f82a2bd570b36d5fa
Reviewed-on: http://codereview.qt.nokia.com/1003
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
|
|
|
|
|
|
|
| |
Updated version of LGPL and FDL licenseheaders.
Apply release phase licenseheaders for all source files.
Reviewed-by: Trust Me
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In Qt 4.7, http network requests are assigned to http connection
channels before connecting the channel.
In Qt 4.8, channels are connected "blind" as this gives a performance
improvement in certain circumstances.
On the assumption that User-Agent should be the same for all the
requests being sent to the server in a given burst, we use the first
queued request to set the user agent for a http proxy.
Task-number: QTBUG-17223
Reviewed-by: Markus Goetz
Reviewed-by: Martin Petersson
|
|
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
|