| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
| |
If the error occurs during the call to
QHttpNetworkConnectionPrivate::queueRequest coming from the http thread
delegate then we will not yet have connected to the signal! But the http
thread delegate checks if the error code is not NoError, and handles
those situations. To let that work we must update the replies.
Pick-to: 6.0 5.15
Change-Id: I47188e9439920694aaad1765ab28add1e86ccdff
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The requests will remove themselves once they get deleted
but since the deletion is done through a _queued_ invokeMethod
to 'deleteLater' we will call
QHttpNetworkConnection::_q_startNextRequest first which may
end up starting a reconnect of the TCP socket which we had the error on.
In this specific instance it manifested as a race condition where we
either don't get a proxyAuthorizationRequired signal at all (it was
emitted while we didn't have any valid replies), or we get the signal
emitted too late and it gets emitted on whatever the next reply was.
Task-number: QTBUG-88417
Pick-to: 5.15 6.0
Change-Id: If3f8ececc5550f1868c90124559cb8e3029646d8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In general the protocolHandler isn't deleted unless
the channel is being destructed. So instead of reset()ing
the pointer we keep it around.
Also update the http2protocolhandler to mimic the http1
handler a little closer: shutting down the channel in
receiveReply if there's no reply/activeStreams, and not
calling receiveReply at all if there's no activeStreams.
Pick-to: 5.15
Change-Id: I702547f594deb6b0c1384068f7e93e560527e8e2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
| |
And not the ssl configuration we have on the reply since it's missing
e.g. the newly received session ticket.
Change-Id: Idfeb09012a847605a76d1fe4fb881c663d019b4a
Reviewed-by: Peter Hartmann <peter@edelhirsch.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
If we ask for HTTP/2 or 1.1 and the server doesn't list either then we
should still try to connect using HTTP/1(.1) just in case, to keep
compatibility.
Task-number: QTBUG-85902
Change-Id: I6ff2e38ac9d767e482a19ee4c81d101be37d3fab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
| |
This seems to only be happening when we have a single channel because
otherwise it will try IPv4 in one channel and IPv6 in the second.
Change-Id: I0d513e25fefffeabfc733e895827aa12da335ef9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
| |
The user-agent should be propagated to the proxy as well or else we
get our default one.
Change-Id: Id2283a8f2ade1a32f7fcf3d691be8d380d334b50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
| |
In some cases (i.e. with SOCKS) we don't have a HTTP/2 request ready
yet so it would just error out.
Change-Id: I6449de5fb52f5208d5641062c5906c3baff18b77
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
| |
In that case we haven't created the h2 handler yet, so it will
crash when trying to access various members.
Task-number: QTBUG-85902
Change-Id: Id0699ff06ef67748a16622703f731db0b0867771
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
It's required as a response to upgraded protocol and apparently some
servers would wait for it, not sending any frames. Becomes a problem
in case only one request was sent.
Fixes: QTBUG-83312
Change-Id: I90dc5c04095f0b78baa404466625d329dc4c6e21
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
| |
| |
| |
| |
| | |
Change-Id: I2c4fdf598b46daf1b69a65848ebe0fd78ef8be24
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\|
| |
| |
| | |
Change-Id: I469b0501cc65fc5ce4d797a69ae89405cc69c7f8
|
| |
| |
| |
| |
| |
| |
| | |
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
examples/network/bearermonitor/CMakeLists.txt
examples/network/CMakeLists.txt
src/corelib/tools/qlinkedlist.h
src/sql/kernel/qsqldriver_p.h
src/sql/kernel/qsqlresult_p.h
src/widgets/kernel/qwidget.cpp
src/widgets/kernel/qwidget_p.h
tests/auto/network/socket/platformsocketengine/tst_platformsocketengine.cpp
tests/auto/network/socket/qtcpsocket/tst_qtcpsocket.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Change-Id: I21a3c34570ae79ea9d30107fae71759d7eac17d9
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/corelib/tools/qlinkedlist.h
src/plugins/platforms/wasm/qwasmintegration.cpp
src/plugins/platforms/wasm/qwasmscreen.cpp
Change-Id: Iefca7f9f4966bdc20e7052aca736874861055738
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In a case where a connection is refused, then it is possible for it to
fail at the time that the QHttpNetworkReply is being created and
therefore after the connections have been made it would have already
emitted the signal to indicate it was finished with an error.
To account for this, then it checks if there is an error code set on
the reply and if there is then it will call the relevant slot right away.
Fixes: QTBUG-57799
Change-Id: I4e73e5c82092c09f825343d18db40b47c3cdb9ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In Qt6 QNAM will no longer use bearer in any way so we deprecate it now.
Also mark bearermanagement-conditioned sections for removal in Qt6,
the _q_networksession property is part of how QNAM passes the
QNetworkSession around.
Task-number: QTBUG-81609
Change-Id: I04aad9dd96482c6822dffba1b9af7aa58961149c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\| |
| | |
| | |
| | | |
Change-Id: Ia24cc8b86def0d9d9c17d6775cc519e491b860b1
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Move away from using 0 as pointer literal.
Done using clang-tidy. This is not complete as
run-clang-tidy can't handle all of qtbase in one go.
Change-Id: I1076a21f32aac0dab078af6f175f7508145eece0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As it was superseded by HTTP/2. Bye, Speedy. Since it's Qt 6,
we also fix the attribute's enumerator to fit our coding
convention with HTTP2AllowedAttribute becoming Http2AllowedAttribute,
and the same for HTTP2WasUsedAttribute.
tst_qnetworkreply in 'benchmark' directory of qtbase/tests
was updated - we have the logic they tested in preConnectEncrypted
in tst_http2 now.
Manual qnetworkreply test was updated (instead of SPDY in NPN failure
we can use H2, the second test was deleted - again, auto-tested in
tst_http2).
Change-Id: I559c140c333ddf72664911c6e275b1d0d2b980a9
Task-number: QTBUG-78255
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|\
| |
| |
| | |
Change-Id: Idcf8fc1d79bcd84b494d7f43308e6fe82d60e1a4
|
| |
| |
| |
| |
| |
| |
| |
| | |
Found while preparing SPDY retirement.
Change-Id: I30f923fdeb0f6f0b5e808a3e7b7d81ddb9c4ef12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|\|
| |
| |
| |
| |
| |
| | |
Conflicts:
tests/auto/gui/text/qtextlayout/tst_qtextlayout.cpp
Change-Id: Idd3ca5cb9a2b95a4c3513b2a4c8966e6f56193f1
|
| |\
| | |
| | |
| | | |
Change-Id: I371c5ae1af6f58e32e579671f485b92b586e0b76
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
While working with HTTP/2, we are not re-sending failed requests.
In case we receive a GOAWAY frame, we properly handle it by
processing some active streams if possible, and aborting streams
that will not proceed further with ContentResendError. But it's
possible that some server failed to send us GOAWAY (for example,
it died) or closed the connection not finishing the streams that
were still active and valid (ID <= value from GOAWAY frame).
Now that we will not re-connect, there is no reason to be quiet
about us not progressing - emit RemoteHostClosedError on any
remaining active stream/request we cannot process further.
Fixes: QTBUG-77852
Change-Id: I4cd68a1c8c103b1fbe36c20a1cc406ab2e20dd12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 543769666f18f79bd6ebd6119a39834aafc2b0df)
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The _q_error slot has a special case for RemoteHostClosedError,
where the current channel's state is 'idle' and no request/reply
is in progress. The comment states that:
"Not actually an error, it is normal for Keep-Alive connections
to close after some time if no request is sent on them. No need
to error the other replies below. Just bail out here. The _q_disconnected
will handle the possibly pipelined replies."
_q_disconnected, indeed, takes care about pipelined replies ... calling
'ensureConnected' even if we have 0 replies in pipeline, which makes
zero sense to me and results in QNAM endlessly trying to re-connect
to the server.
Fixes: QTBUG-77852
Change-Id: I6dcb43b36a6d432bc940246a08f65e1ee903fd24
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
While working with HTTP/2, we are not re-sending failed requests.
In case we receive a GOAWAY frame, we properly handle it by
processing some active streams if possible, and aborting streams
that will not proceed further with ContentResendError. But it's
possible that some server failed to send us GOAWAY (for example,
it died) or closed the connection not finishing the streams that
were still active and valid (ID <= value from GOAWAY frame).
Now that we will not re-connect, there is no reason to be quiet
about us not progressing - emit RemoteHostClosedError on any
remaining active stream/request we cannot process further.
Fixes: QTBUG-77852
Change-Id: I4cd68a1c8c103b1fbe36c20a1cc406ab2e20dd12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Similar to TLS configuration that we can use on QNetworkRequest,
we can configure different options in our HTTP/2 handling by
providing QNetworkAccessManager with h2 configuration. Previously,
it was only possible internally in our auto-test - a hack with
QObject's properties and a private class. Now it's time to provide
a public API for this.
[ChangeLog][QtNetwork][QNetworkRequest] Add an ability to configure HTTP/2 protocol
Change-Id: I80266a74f6dcdfabb7fc05ed1dce17897bcda886
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/network/ssl/qsslsocket_openssl.cpp
src/platformsupport/vkconvenience/qvkconvenience.cpp
Change-Id: I97ce6ed185f7fdad8102cc58d3cfec0119fd7bb4
|
| |\|
| | |
| | |
| | | |
Change-Id: I912bd8851c390302414d3dfb3c8220df5a0d5630
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When using a http proxy (and presumably other proxies) we might have
failed/aborted (aka "finished") the request and _then_ receive a
"proxy authentication required" message from the proxy. In this case
there is no spdy/http2 reply in the queue, so asserting is wrong.
Change-Id: Id9b76b580299f6a6cd6efad62d6aaf63183816fb
Fixes: QTBUG-76426
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In some scenarios with QNAM we call socket->close, leading to a flush,
leading to an error, leading to another error emission... To work
around this scenario we stop trying to close the socket if the network
channel is already closing.
Change-Id: Id15504f476484ce61f11ba83a5755ceb5f581f9b
Fixes: QTBUG-76567
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Private classes to replace broken or even not working at all 'session management'
and 'bearer manager' (on at least two major platforms we support). This
implementation is macOS/iOS-specific and uses SystemConfiguration framework,
or more precisely SCNetworkReachability's part of it.
Task-number: QTBUG-40332
Change-Id: Iac5f44c4063c4092b93b8cf2bde3fb2c524855b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|\|
| |
| |
| | |
Change-Id: Ica3f89ace33585ad7854417a328156f5a68e2a00
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
As explained in the inline comment we don't actually have a
protocol handler until we're done encrypting when we use SSL, but we
would still retry the connection if an error occurred between
"connected" and "encrypted". This would then lead us to fail an assert
that checked if a protocol handler had been set
Fixes: QTBUG-47822
Change-Id: If7f4ef4f70e72b764f492e7ced5a9349b3a421d2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|/
|
|
|
|
|
|
|
|
| |
This adds functions to QNetworkRequest to be able to set the
peerVerifyName. An overload of connectToHostEncrypted is also added to
have an extra argument to allow setting it directly in this manner too.
Fixes: QTBUG-73125
Change-Id: I371e90035b53a74c9eb3cef64f367e307dce073e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\
| |
| |
| | |
refs/staging/dev
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/corelib/global/minimum-linux.S
src/network/access/qhttpthreaddelegate.cpp
src/widgets/kernel/qwidgetwindow.cpp
Change-Id: Id2e817e85f85c68f5482c9a12912d35590f9d5f8
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|/ /
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Exclude QHttp(Multi)Part from being built if http is disabled, and
replace the exclusion macros. Use the qmake project files to exclude
source files, and QT_REQUIRE_CONFIG(http) in headers.
Change-Id: I432fa3c78aa97b5ed2eb1027ac1dc3bdb134f9ba
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
|
|\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/plugins/platforms/windows/qwindowsmousehandler.cpp
src/plugins/platforms/xcb/qxcbimage.cpp
tests/auto/network/access/qnetworkreply/tst_qnetworkreply.cpp
tests/manual/qtabletevent/regular_widgets/main.cpp
Done-with: Friedemann Kleint<Friedemann.Kleint@qt.io>
Done-with: Mårten Nordheim<marten.nordheim@qt.io>
Change-Id: I5b2499513a92c590ed0756f7d2e93c35a64b7f30
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/plugins/platforms/direct2d/direct2d.pro
src/plugins/platforms/ios/qiosclipboard.mm
src/plugins/platforms/windows/windows.pro
Change-Id: Idffa03b3990bd642784f528821c5446b2e1008ef
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
| |\|
| | |
| | |
| | | |
Change-Id: I3cf73c53cf131d0babfb558c2507bed0e0fc5f08
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Now that we have a proper ALPN/NPN + Protocol Upgrade, we can also
add H2Direct - this can be useful for our users that have to work
with either Secure Transport or a TLS implementation not supporting
ALPN/NPN and with 'h2direct' servers in case they have prior knowledge
of HTTP/2 support. The difference with RFC 7540 is the fact we also
allow this 'direct' in case of 'https' scheme (it appears existing
HTTP/2 server implementations support such mode too).
[ChangeLog][QtNetwork] Add Http2DirectAttribute to enable 'direct' HTTP/2
protocol without ALPN/NPN and without protocol upgrade negotiations.
Task-number: QTBUG-61397
Change-Id: I0499d33ec45dede765890059fd9542dab236bd5d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Without TLS (and thus ALPN/NPN negotiation) HTTP/2 requires
a protocol upgrade procedure, as described in RFC 7540, 3.2.
We start as HTTP/1.1 (and thus we create QHttpProtocolHandler first),
augmenting the headers we send with 'Upgrade: h2c'. In case
we receive HTTP/1.1 response with status code 101 ('Switching
Protocols'), we continue as HTTP/2 session, creating QHttp2ProtocolHandler
and pretending the first request we sent was HTTP/2 request
on a real HTTP/2 stream. If the first response is something different
from 101, we continue as HTTP/1.1. This change also required
auto-test update: our toy-server now has to respond to
the initial HTTP/1.1 request on a platform without ALPN/NPN.
As a bonus a subtle flakyness in 'goaway' auto-test went
away (well, it was fixed).
[ChangeLog][QtNetwork][HTTP/2] In case of clear text HTTP/2 we
now initiate a required protocol upgrade procedure instead of
'H2Direct' connection.
Task-number: QTBUG-61397
Change-Id: I573fa304fdaf661490159037dc47775d97c8ea5b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|