summaryrefslogtreecommitdiffstats
path: root/src/network/socket/qnativesocketengine_unix.cpp
Commit message (Collapse)AuthorAgeFilesLines
* expand tabs and related whitespace fixes in *.{cpp,h,qdoc}Oswald Buddenhagen2014-01-131-1/+1
| | | | | | | | the diff -w for this commit is empty. Started-by: Thiago Macieira <thiago.macieira@intel.com> Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix unsigned/signed comparison warning in qnativesocketengine_unixEskil Abrahamsen Blomfeldt2013-09-091-1/+1
| | | | | | | | This triggered when building on Android. Make sure we cast the sizeof() to the same type as the variable we compare to. Change-Id: I65d4fe7edc2a39f1a4b68e78f4c19bff6e4aa0f8 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Switch to struct timespec everywhere instead of timevalThiago Macieira2013-01-281-4/+4
| | | | | | | | | | | | This avoids an extra division by 1000 when getting the current time. This can't overflow, under normal circumstances, even on 32-bit: when adding two values less than 1 billion, the result is less than 2 billion, which is less than 2^31. Change-Id: I6f8e1aadfe2fcf6ac8da584eab4c1e61aee51cbb Reviewed-by: David Faure (KDE) <faure@kde.org> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Update copyright year in Digia's license headersSergio Ahumada2013-01-181-1/+1
| | | | | Change-Id: Ic804938fc352291d011800d21e549c10acac66fb Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* If accept fails, stop accepting new connections and emit error signal.Jonas M. Gastal2012-09-261-0/+40
| | | | | | Task-number: QTBUG-24778 Change-Id: I6c5b685b3f861a0fafc1475c41bb35cede17d712 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Centralise handling & ignoring of SIGPIPE in qcore_unix_p.hThiago Macieira2012-09-241-27/+1
| | | | | | | | | | | | | We had two instances of this function in the Qt source code, one clearly a copy of the other, so both had the same thread-safety issue. Instead, let's have one copy and have both write_nosignal() and sendto() call them. Q_NO_POSIX_SIGNALS is also gone. It was only used with Symbian. Change-Id: I0f1354a8e9df8e6b10a02f86a940e3c6d1222087 Reviewed-by: Peter Hartmann <phartmann@rim.com> Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
* Change copyrights from Nokia to DigiaIikka Eklund2012-09-221-24/+24
| | | | | | | | Change copyrights and license headers from Nokia to Digia Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e Reviewed-by: Lars Knoll <lars.knoll@digia.com> Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
* Fix thread-safety of qt_ignore_sigpipeThiago Macieira2012-09-181-1/+5
| | | | | | | | | | | | | The testAndSet operation would mean another thread could see the value of 1 and proceed to write(2)/sendto(2) before SIGPIPE had been ignored. If the pipe or socket were already closed by then, a SIGPIPE would be delivered to the application with its default action: terminate. Change-Id: I62dc8f5fa14c1dd453d13e4053c642bd78fbc468 Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Shane Kearns <shane.kearns@accenture.com> Reviewed-by: Peter Hartmann <phartmann@rim.com>
* Removing duplicate includesSergio Ahumada2012-09-091-3/+0
| | | | | | | Do not include a header more than once Change-Id: Ia2e5d66e72988ad833cf5177a3f8aa988bf510e9 Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
* Fix double error setting, which overrode correct value.Jonas M. Gastal2012-06-151-1/+0
| | | | | Change-Id: I3bc992b8b41f305a01b80bca16346e18ac4d7833 Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
* Fallback to IPv4 when IPv6 is not present.Jonas M. Gastal2012-05-211-1/+15
| | | | | | | In tests when IPv6 is not present QSKIP IPv6 tests. Task-number: QTBUG-23660 Change-Id: I02abc7322d765a93cbf661e53c76257f03dca73e Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
* Fix sending UDP packets to link local addressesShane Kearns2012-05-111-16/+21
| | | | | | | | | | | | When the scope ID is not set, Mac and Windows will not transmit packets to link local addresses. This patch implements setting the scope in the native socket engines and adds a test case. (it was partially implemented already, though UDP specific code paths were missed in the unix engine) Task-number: QTBUG-25634 Change-Id: I23300bdc9856e38458078e913daaa59cd05a74b5 Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
* Fix tst_qtcpserver::serverAddress on Mac OSXShane Kearns2012-04-241-1/+5
| | | | | | | | | | | | | While linux returns the local address of dual mode sockets as "::" i.e. the IPv6 address, OSX returns "::FFFF:0.0.0.0" i.e. the IPv4 address. In the unix socket engine, treat both of these as candidates for being a dual mode socket. This should hopefully cover other unixes which we haven't tested. Task-Number: QTBUG-25445 Change-Id: If1251018d54da98618223ba538c00ba54ac4cb4e Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix QTcpServer::listen() returning true when the port is in use on OS X.Robin Burchell2012-04-021-1/+7
| | | | | | | | | | | | | | | | | | | | Way back in the mists of time, someone added SO_REUSEPORT to socket binding, which was great, because otherwise it meant that multiple UDP sockets couldn't share the same port on OS X (as platforms with SO_REUSEPORT apparently don't support rebinding with SO_REUSEADDR). However: SO_REUSEPORT also means that *any* bind on a port will succeed, which is most definitely not wanted in the case of TCP sockets, so check the socket type before performing the actual bind. Also test that multiple listens don't take effect. Change-Id: I2f8d450bcfb8a7f3abd8918a4e789a850281dd13 Done-with: Thiago Macieira Done-with: Shane Kearns Task-number: QTBUG-6305 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
* Allow autobound UDP sockets to send to IPv4 and IPv6Shane Kearns2012-03-221-1/+2
| | | | | | | | | | | | | | | | When writeDatagram is called without first binding the UDP socket, then bind it as QHostAddress::Any. This allows the same socket to be used to sent to both IPv4 and IPv6 destination addresses. Allowing the OS to autobind the socket inside sendTo() may result in a single protocol socket. Task-number: QTBUG-5275 Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930 Reviewed-by: Richard J. Moore <rich@kde.org> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
* Remove "All rights reserved" line from license headers.Jason McDonald2012-01-301-1/+1
| | | | | | | | | | As in the past, to avoid rewriting various autotests that contain line-number information, an extra blank line has been inserted at the end of the license text to ensure that this commit does not change the total number of lines in the license header. Change-Id: I311e001373776812699d6efc045b5f742890c689 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Update contact information in license headers.Jason McDonald2012-01-231-1/+1
| | | | | | | Replace Nokia contact email address with Qt Project website. Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Update copyright year in license headers.Jason McDonald2012-01-051-1/+1
| | | | | Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Add ToS option to sockets.Jonas M. Gastal2011-12-221-0/+12
| | | | | | | | | | | | | | Creates a new SocketOption called called TypeOfServiceOption that can be used with the existing setSocketOption method to set the ToS byte in a socket socket. This is done only for unix systems because windows doesn't support directly setting the ToS/DSCP byte: http://support.microsoft.com/kb/248611 http://blogs.msdn.com/b/wndp/archive/2006/07/05/657196.aspx Change-Id: Idf9da2dd8307ac7057982fbfdf9e4e9ebe366780 Task-number: QTBUG-6221 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Fix QTcpServer::serverAddress() for dual stack socketsShane Kearns2011-12-011-0/+15
| | | | | | | | | | When listening on QHostAddress::Any, serverAddress() should return QHostAddress::Any too, assuming that setting the socket options was successful. Task-number: QTBUG-22899 Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Set localAddress and localPort on socket binding.Robin Burchell2011-10-311-0/+3
| | | | | | | | | This should have always been the case, as it simply makes sense, but the upcoming moving of binding to QAbstractSocket will require this for autotesting. Change-Id: Ieef70196616227e7914c76fff5388a4068c36efb Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Always assume IPv6 supportMarkus Goetz2011-07-041-40/+3
| | | | | | | | | | | It's 2011 baby! And until Qt5 is released probably 2012 :-) Change-Id: I397aabf25e93c8afb5f562636710985cf0c7acfa Reviewed-on: http://codereview.qt.nokia.com/1008 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Shane Kearns <shane.kearns@accenture.com> Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com> Reviewed-by: Markus Goetz
* IPv4 + IPv6 dual stack socketsShane Kearns2011-06-221-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for binding "dual stack" sockets (via QUdpSocket or QTcpServer). A dual stack socket will accept incoming connections on either IPv4 or IPv6 interfaces. QHostAddress::Any - use this to bind a dual stack socket QHostAddress::AnyIPv6 - use this to bind a socket for IPv6 only QHostAddress::AnyIPv4 - use this to bind a socket for IPv4 only Binding to a specific address rather than one of the "any" addresses is restricting you to a protocol anyway so no behaviour change there. IPv6 sockets were previously dual stack on some OS and v6 only on others Any previously meant IPv4 only This commit implemented & tested on Windows 7, Linux (Ubuntu 10.04) and Mac OS 10.6.7. Windows XP and server 2003 do not support dual stack sockets, even though they can support IPv6. On those versions, QHostAddress::Any will still bind to IPv4 0.0.0.0 (which is also the behaviour anywhere QT_NO_IPV6 is defined) Autotests run: qudpsocket (includes a new test case) qtcpserver (includes a new test case) qtcpsocket qnetworkreply qhostaddress Task-number: QTBUG-17080 Change-Id: Id486677c4f832e18dc0ff1a86c5f5fc422c9eb4f Reviewed-on: http://codereview.qt.nokia.com/421 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com> Reviewed-by: Markus Goetz
* Update licenseheader text in source files for qtbase Qt moduleJyri Tahtela2011-05-241-17/+17
| | | | | | | Updated version of LGPL and FDL licenseheaders. Apply release phase licenseheaders for all source files. Reviewed-by: Trust Me
* Initial import from the monolithic Qt.Qt by Nokia2011-04-271-0/+1125
This is the beginning of revision history for this module. If you want to look at revision history older than this, please refer to the Qt Git wiki for how to use Git history grafting. At the time of writing, this wiki is located here: http://qt.gitorious.org/qt/pages/GitIntroductionWithQt If you have already performed the grafting and you don't see any history beyond this commit, try running "git log" with the "--follow" argument. Branched from the monolithic repo, Qt master branch, at commit 896db169ea224deb96c59ce8af800d019de63f12
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-01 10:59:41 +0000