| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
| |
Both Negotiate and NTLM are conditioned on the 'challenge' being empty
when starting the authentication process. So let's reset it when we
start the authentication process.
Fixes: QTBUG-83370
Change-Id: I41af6d5bcfe3dd980ca2bedce10ceff4f61047ff
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Do not call SSL_shutdown on a session that is in handshake state (SSL_in_init(s)
returns 1). Also, do not call SSL_shutdown if a session encountered a fatal
error (SSL_ERROR_SYSCALL or SSL_ERROR_SSL was found before). If SSL_shutdown
was unsuccessful (returned code != 1), we have to clear the error(s) it queued.
Unfortunately, SSL_in_init was a macro in OpenSSL 1.0.x. We have to
resolve SSL_state to implement SSL_in_init.
Fixes: QTBUG-83450
Change-Id: I6326119f4e79605429263045ac20605c30dccca3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit 8907635da59c2ae0e8db01f27b24a841b830e655)
|
|
|
|
|
|
|
|
|
| |
No sanitizer is needed, just looking at the code is enough.
It was wrong.
Change-Id: I9df417c137d6b3361c3161865e099a8be40860de
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
| |
Change-Id: I3047cb24051c7f25d77d5b2b86ff145a52695107
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
| |
Change-Id: I0abe9034874a80423ad1e332404236dc5ff54365
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
What I originally thought NLM_CONNECTIVITY_IPV*_SUBNET meant turns out
to be what NLM_CONNECTIVITY_IPV*_LOCALNETWORK is, leaving me to wonder
when *_SUBNET is actually used. Anyway we now also check *_LOCALNETWORK
to make sure we're not unnecessarily denying certain connections to be
made.
At the same time check for link-local connections where both local and
remote are link-local, in this case even NLM_CONNECTIVITY_IPV*_NOTRAFFIC
is valid. Unfortunately this check cannot be done in
QNetworkStatusMonitor, so QNAM will likely not allow these connections.
Task-number: QTBUG-80947
Change-Id: Ieb96ce9f4a478eef0c3ea47f2471f701c102b4d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In a case where a connection is refused, then it is possible for it to
fail at the time that the QHttpNetworkReply is being created and
therefore after the connections have been made it would have already
emitted the signal to indicate it was finished with an error.
To account for this, then it checks if there is an error code set on
the reply and if there is then it will call the relevant slot right away.
Fixes: QTBUG-57799
Change-Id: I4e73e5c82092c09f825343d18db40b47c3cdb9ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our ALPN-related definitions were conditioned both on OPENSSL_NO_NEXTPROTONEG
and OpenSSL version (since ALPN first was introduced in 1.0.2), but
resolving was only under version check, not OPENSSL_NO_NEXTPROTONEG.
This went unnoticed for many years, and was found only recently with
OpenSSL built with no-nexprotoneg.
Fixes: QTBUG-81762
Change-Id: I7afca0b2034a234a19b5bcdefd3ce26f4202cddb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
| |
Change-Id: I00fcb1c2374e7ca168b6240f9d41c0323fb0867c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As long as we do a multi abi build in one go there is no easy way for us to know
where the ssl libs are located for each ABI. The easiest way is to use libs
prefixed with the ABI.
For configure set we are using "_arm64-v8a" prefix as the configure script will
always use arm64-v8a to run the tests.
Don't show the OPENSSL_LIBS example as it won't work on Android.
Here https://github.com/KDAB/android_openssl/commit/ebb0b68be4 you can find
a script which builds these libs.
Fixes: QTBUG-80862
Change-Id: I019c2a208ae48a7356b8f3933d0f4aad5ac156a3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
src/corelib/tools/qhash.cpp:2596: (qdoc) warning: clang found diagnostics parsing \fn template <class Key, class T> template <class InputIterator> QMultiHash::QMultiHash(InputIterator begin, InputIterator end)
error: 'QMultiHash' is not a class, namespace, or enumeration
src/corelib/kernel/qobject.cpp:4593: (qdoc) warning: Undocumented parameter 'EXPORT_MACRO' in QObject::Q_NAMESPACE_EXPORT
src/corelib/global/qfloat16.cpp:129: (qdoc) warning: Cannot tie this documentation to anything
src/corelib/text/qlocale.qdoc:1204: (qdoc) warning: Overrides a previous doc
src/corelib/text/qlocale.qdoc:1187: (qdoc) warning: (The previous doc is here)
src/network/kernel/qhostinfo.cpp:597: (qdoc) warning: clang found diagnostics parsing \fn QHostInfo(QHostInfo &&other)
src/printsupport/dialogs/qabstractprintdialog.cpp:346: (qdoc) warning: clang found diagnostics parsing \fn int QAbstractPrintDialog::exec(): error: out-of-line definition of 'exec' does not match any declaration in 'QAbstractPrintDialog'
src/testlib/qsignalspy.qdoc:101: (qdoc) warning: clang found diagnostics parsing \fn QSignalSpy(const QObject *obj, const QMetaMethod &signal): error: expected unqualified-id
src/testlib/doc/src/qttest-best-practices.qdoc:28: (qdoc) warning: Can't link to 'Q_VERIFY2()'
src/widgets/kernel/qactiongroup.cpp:291: (qdoc) warning: Undocumented parameter 'b' in QActionGroup::setExclusive()
src/widgets/kernel/qactiongroup.cpp:305: (qdoc) warning: Undocumented return value (hint: use 'return' or 'returns' in the text
src/widgets/kernel/qshortcut.cpp:542: (qdoc) warning: No such parameter 'context' in QShortcut::QShortcut()
src/widgets/widgets/qdatetimeedit.cpp:632: (qdoc) warning: No such parameter 'minimumTime' in QDateTimeEdit::setTimeRange()
src/widgets/widgets/qdatetimeedit.cpp:632: (qdoc) warning: No such parameter 'maximumTime' in QDateTimeEdit::setTimeRange()
src/widgets/widgets/qdatetimeedit.cpp:632: (qdoc) warning: No such parameter 'less' in QDateTimeEdit::setTimeRange()
Change-Id: I9799b5135e84c4d811674b2d114ef27315bc12df
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
|
|
|
|
|
|
| |
Task-number: QTBUG-79824
Change-Id: I6557de598de1931fc30556951d35783d02b83abe
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
|
|
|
|
|
|
|
|
|
| |
Introduced by fe6e54fb1f5cda652b9489f740763f8d735621dd. The probability -> 0,
meaning malloc must fail to trigger it, but it is still a leak. We now use
std::unique_ptr which improves the code in general a bit and fixes a leak.
Change-Id: I6c0fa36953196d3235fb60354dc9ad2396d8dfcb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
.qmake.conf
mkspecs/features/mac/default_post.prf
src/corelib/tools/qsimd_p.h
src/platformsupport/fontdatabases/mac/qcoretextfontdatabase.mm
util/qfloat16-tables/gen_qfloat16_tables.cpp
Change-Id: If48fa8a3bc3c983706b609a6d3822cb67c1352a4
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Make it clear that the functions will return false if the socket was already
disconnected.
Fix the QLocalSocket example snippet to handle that case correctly by checking
state() before attempting to wait.
Fixes: QTBUG-50711
Change-Id: I4ab4062446a0041a35a3a1d65a19202ffa103298
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| | |
And add a test for it so it can no longer happen in any current or
future implementation.
Change-Id: I3214aa90595e291b1e1c66befe185cfe1ea7bc6b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Use QT_CONFIG consistently and enclose
sslConfigurationImplementation(), setSslConfigurationImplementation()
and ignoreSslErrorsImplementation() within QT_CONFIG as well.
This enables a build of Qt for Python with -no-feature-ssl.
Change-Id: Ia699293ab73a5dc86d8dcf95aa5f6369334d36a2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| | |
This avoids error prone manual mappings when having to persist such values,
as eg. done in https://cgit.kde.org/kio.git/tree/src/kssld/kssld.cpp#n49.
Change-Id: Ib279c116a10ce8edc0b686b8b80cbd848b4b410e
Reviewed-by: David Faure <david.faure@kdab.com>
|
| |
| |
| |
| |
| |
| |
| | |
that was accidentally introduced this week.
Change-Id: I0731c7c64e51b40f230b42694603056d89a05712
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
since declarations in gssapi.h are marked as deprecated.
Fixes: QTBUG-78810
Change-Id: I241ae4913f362f6e9219438e9bfe7a63dfc91b7c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| | |
Increases readability
Change-Id: I81ea915517fd2cd6bc2780f37ba8d8097c63f44b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This way we can actually filter out times in sitatuations where it
proved to not be available and as a library we can simply "use" it.
Added in the pkgConfig source as well to make sure we can pick it up
on systems where it has a different name.
Fixes: QTBUG-78765
Change-Id: I4754923ddafd9274105e4f93d66a4039872e310c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: André Klitzing <aklitzing@gmail.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Android 5 doesn't extract the files from libs folder unless they are prefixed with "lib".
This patch sets a proper name for the plugin which will make gdb happy and it will also
avoid any name clashes.
If we rename the plugins when we copy them, gdb won't find them, therefore it can't load their
symbols.
On Android all the libs are in a single folder, so to make sure we don't have any name clashes,
we are prefixing the plugin name with it's relative path to qt folder (we replace / with _).
Fixes: QTBUG-78616
Change-Id: I7e0e67d65448532769d69f46b1856c029e2cf5cb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
|
|\|
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
qmake/generators/makefile.cpp
qmake/generators/makefile.h
Change-Id: I4c2deac4f6376c85f5e4fe7fb0ccc9ab9a013cd7
|
| |
| |
| |
| |
| |
| | |
Fixes: QTBUG-61771
Change-Id: Ideafe6f8f81c156e941f0548c152021b01b606a1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
After these two classes were no longer marked final clang started
complaining because their dtor is not marked virtual.
Amends 9dc594b2bf3572aa5df3ec3ad2b9842c96e8290d
Change-Id: I42b78c0b444935d3e0cb4d476d3881fd5fb5c3cb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
|
|\|
| |
| |
| | |
Change-Id: Idcf8fc1d79bcd84b494d7f43308e6fe82d60e1a4
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Found while cleaning up SPDY remains: I've noticed that for H2 case
I never check if incomingSslConfiguration is nullptr or not, but
the code several lines below - does it, which looks kind of moronic.
This configuration is initialized when the delegate is created, so
no need to have this if-statement. Instead, assert, making this
behavior a requirement.
Change-Id: I90fb84337be925a3288252aa2491b4c23d6c6cbb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| | |
Found while preparing SPDY retirement.
Change-Id: I30f923fdeb0f6f0b5e808a3e7b7d81ddb9c4ef12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| | |
It's not a failure state, we just need more data. It is handled properly
in other functions.
Change-Id: I9450a78c71a3f4fe9506a7a79de6efa2db08697c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The reason it wasn't working before was a couple of things:
1. Due to an extra 'else' it would not process the SEC_I_RENEGOTIATE
or SEC_I_CONTEXT_EXPIRED branch.
2. The peerCertVerified boolean was not only wrong, but also
broke renegotiation even if the 'else' wasn't there.
My previous attempt to fix it ended up being a noop, so:
Reverts e21fa577dde32849fdaa744f30ad3b23d63b7214
Change-Id: Ifbad55d4bb066b7566bb88cead48e329cbd574f9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
src/corelib/global/qnamespace.qdoc:3279: (qdoc) warning: Can't link to 'QGuiApplication::setHighDdpiScaleFactorRoundingPolicy()'
src/corelib/time/qislamiccivilcalendar.cpp:49: (qdoc) warning: Can't link to 'QJijriCalendar'
src/network/ssl/qsslsocket.cpp:1510: (qdoc) warning: Can't link to 'QSslConfiguration::defaultCaCertificates()'
src/network/access/qhttp2configuration.cpp:49: (qdoc) warning: '\brief' statement does not end with a full stop.
src/gui/text/qtextformat.cpp:532: (qdoc) warning: Undocumented enum item 'TableBorderCollapse' in QTextFormat::Property
src/gui/text/qtextdocument.cpp:2066: (qdoc) warning: Undocumented enum item 'UnknownResource' in QTextDocument::ResourceType
src/gui/kernel/qguiapplication.cpp:3500: (qdoc) warning: Undocumented parameter 'policy' in QGuiApplication::setHighDpiScaleFactorRoundingPolicy()
Change-Id: I3573ef98cf9b58d16525c356270fe009fdffcf45
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
|
|\|
| |
| |
| |
| |
| |
| | |
Conflicts:
tests/auto/gui/text/qtextlayout/tst_qtextlayout.cpp
Change-Id: Idd3ca5cb9a2b95a4c3513b2a4c8966e6f56193f1
|
| |\
| | |
| | |
| | | |
Change-Id: I371c5ae1af6f58e32e579671f485b92b586e0b76
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
While working with HTTP/2, we are not re-sending failed requests.
In case we receive a GOAWAY frame, we properly handle it by
processing some active streams if possible, and aborting streams
that will not proceed further with ContentResendError. But it's
possible that some server failed to send us GOAWAY (for example,
it died) or closed the connection not finishing the streams that
were still active and valid (ID <= value from GOAWAY frame).
Now that we will not re-connect, there is no reason to be quiet
about us not progressing - emit RemoteHostClosedError on any
remaining active stream/request we cannot process further.
Fixes: QTBUG-77852
Change-Id: I4cd68a1c8c103b1fbe36c20a1cc406ab2e20dd12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 543769666f18f79bd6ebd6119a39834aafc2b0df)
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The _q_error slot has a special case for RemoteHostClosedError,
where the current channel's state is 'idle' and no request/reply
is in progress. The comment states that:
"Not actually an error, it is normal for Keep-Alive connections
to close after some time if no request is sent on them. No need
to error the other replies below. Just bail out here. The _q_disconnected
will handle the possibly pipelined replies."
_q_disconnected, indeed, takes care about pipelined replies ... calling
'ensureConnected' even if we have 0 replies in pipeline, which makes
zero sense to me and results in QNAM endlessly trying to re-connect
to the server.
Fixes: QTBUG-77852
Change-Id: I6dcb43b36a6d432bc940246a08f65e1ee903fd24
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
I realized this is a potential scenario where we will have leftover
data, but it wasn't covered.
Change-Id: Ibaf1015bf2aee120e4a4d98888925b88ecb6ddfd
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
While working with HTTP/2, we are not re-sending failed requests.
In case we receive a GOAWAY frame, we properly handle it by
processing some active streams if possible, and aborting streams
that will not proceed further with ContentResendError. But it's
possible that some server failed to send us GOAWAY (for example,
it died) or closed the connection not finishing the streams that
were still active and valid (ID <= value from GOAWAY frame).
Now that we will not re-connect, there is no reason to be quiet
about us not progressing - emit RemoteHostClosedError on any
remaining active stream/request we cannot process further.
Fixes: QTBUG-77852
Change-Id: I4cd68a1c8c103b1fbe36c20a1cc406ab2e20dd12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335853f283c47ffb0f5611d14e6dbe84b and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/corelib/codecs/qicucodec.cpp
src/dbus/qdbusserver.cpp
src/gui/painting/qbezier.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms/qeglfskmsgbmscreen.cpp
src/plugins/printsupport/cups/qppdprintdevice.cpp
Change-Id: I2703128bb64baf5580fbc2c2061b55b0f0611d2a
|
| |\|
| | |
| | |
| | | |
Change-Id: I9823da32168e99bbece2f8337d0bd4d33e6d634c
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When the end range of a byte range in a HTTP request is skipped the download
manager adds 0 it its place when resuming that download.
When there is no end range given the value is skipped.
Task-number: QTBUG-77867
Change-Id: I52358c94cf56c88217fcc91abb102ed393ac7242
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* initialize the structure used as argument to ioctl SIOCGIFMEDIA
The ioctl in ifType(...) returned -1 and set errno to EFAULT, thus
the code to determine the interface type was not executed.
Task-number: QTBUG-76408
Change-Id: Ib69c2c0cd4dda3604d568adf9746e0c9a280e9a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This should help when things are moving fast, and downloads and
network object are destroyed before the callbacks finishes.
Change-Id: I1f65965bd61efc2e641d03eb071f23e684dd5c44
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
| |\ \ |
|
| | |\|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Conflicts:
src/gui/configure.json
src/gui/util/qtexturefilereader.cpp
src/gui/util/util.pri
tests/auto/gui/util/qtexturefilereader/tst_qtexturefilereader.cpp
Change-Id: I2bc4f84705b66099e97330cda68e0b816aceb9cc
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
As is said in RFC7301 in section 3.1 [1]:
Protocols are named by IANA-registered, opaque, non-empty byte strings
[...]. Empty strings MUST NOT be included and byte strings MUST NOT be
truncated.
[1]: https://tools.ietf.org/html/rfc7301#section-3.1
Change-Id: I2c41fa99984a53cc58803e5a264d06edac964cc6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | | |
The source code is still only using the old negative define check.
Change-Id: I7e2775d6d4664cb5b802b0a40fb3f1711c8f6915
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
As is said in RFC7301 in section 3.1 [1]:
Protocols are named by IANA-registered, opaque, non-empty byte strings
[...]. Empty strings MUST NOT be included and byte strings MUST NOT be
truncated.
[1]: https://tools.ietf.org/html/rfc7301#section-3.1
Change-Id: I38168ac570a433807e16121d5dec46d4ac73c4bf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|