| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Short-lived benchmarks (benchmarks that complete in a very short period
of measured time) are often more affected by jitter and warm-up effects
than longer running benchmarks. Since QBENCHMARK stores the median
result of all accepted benchmark runs, a larger number of aggregation
runs is preferable for short-lived tests, but not necessarily for longer
running ones. The minimumtotal option, specified in units of the
selected measurement, will make the benchmark repeat a benchmark until
the total measured cost exceeds the specified threshold. The displayed
median result will then tend to be more accurate. This is especially
useful for data-driven benchmarks in case the data tags scale the
benchmarked operation from little to large cost.
Change-Id: Ib857de64aaffc77715a0000d36f0245f31d86b9a
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added support for most hardware and software counters available on
Linux 3.3. The cache-based counters are missing because they need
special handling.
Also added an option that lists available counters. Note that the list
is of counters the library knows about, not the counters that the
hardware can measure.
Change-Id: I9f6fb09b5460bf4ac6082081611c1d6ff806a3fa
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, we only support one event type: counting CPU cycles with
hardware counters. There are no fallbacks if this hardware counter is
not available, and there is currently no way to specify other
counters.
Benchlib only supports reporting one event per benchmark, even though
the event counter interface allows specifying more than one. Still,
the hardware usually has limitations on how many events it can monitor
at a time, and we'd prefer to have the counter running at 100% of the
time, so this will not change.
Change-Id: I79858a3ad1e696dc4b7b72c420e5a04b67cd55de
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
|
|
|
|
|
|
|
| |
Currently, it only prints "perf available" if you use the -perf option
and perf is available. The implementation comes in the next commits.
Change-Id: Ic6cdee70e21df25780799a4bc31ca2c2d923b9f8
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
|
|
|
|
| |
Change-Id: I271a480b79c7768942911a28c84d6bb5a8d840d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/concurrent/doc/qtconcurrent.qdocconf
src/corelib/doc/qtcore.qdocconf
src/corelib/global/qglobal.h
src/dbus/doc/qtdbus.qdocconf
src/dbus/qdbusmessage.h
src/gui/doc/qtgui.qdocconf
src/gui/image/qimagereader.cpp
src/network/doc/qtnetwork.qdocconf
src/opengl/doc/qtopengl.qdocconf
src/opengl/qgl.h
src/plugins/platforms/windows/qwindowswindow.cpp
src/printsupport/doc/qtprintsupport.qdocconf
src/sql/doc/qtsql.qdocconf
src/testlib/doc/qttestlib.qdocconf
src/tools/qdoc/doc/config/qt-cpp-ignore.qdocconf
src/widgets/doc/qtwidgets.qdocconf
src/xml/doc/qtxml.qdocconf
Change-Id: Ie9a1fa2cc44bec22a0b942e817a1095ca3414629
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentation
http://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Change-Id: I491edcae84c149775cf3640626ccff8cbf0d69fe
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
|
|\|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/corelib/io/qsavefile_p.h
src/corelib/tools/qregularexpression.cpp
src/gui/util/qvalidator.cpp
src/gui/util/qvalidator.h
Change-Id: I58fdf0358bd86e2fad5d9ad0556f3d3f1f535825
|
| |
| |
| |
| |
| | |
Change-Id: Ic804938fc352291d011800d21e549c10acac66fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only QStringList was handled before, now any QList is handled.
A specialization for QStringList is still needed though, due to the way
template matching works.
Example with QList<int>. Before:
FAIL! : tst_QTextCodec::threadSafety() Compared values are not the same
Loc: [../tst_qtextcodec.cpp(2057)]
After:
FAIL! : tst_QTextCodec::threadSafety() Compared lists differ at index 0.
Actual (res2.toList()): '0'
Expected (mibList): '3'
Loc: [../tst_qtextcodec.cpp(2057)]
Change-Id: If0fdec3236ddb78a679ee549aba569ef5571c395
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
|
|
|
|
|
| |
Change-Id: I48173186afb874d307010f4f303d0e4f97ec0287
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
|
|
|
|
|
| |
Change-Id: I6fb1167634b0acddfa61b92d104d98ba8a1a15cb
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
|
| |\
| | |
| | |
| | | |
Change-Id: I7e6cee190a341901dfbf8effb54ebccb91bf7a17
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Replace "QTestLib" with "Qt Test". Some style and language edits.
Remove some empty headings.
Change-Id: I568b4bbde981c3ef1899c830931892c16b66b4e2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
1. Remove the code for activate application, due to Qt 5 already
has this feature
2. Update the code for power setting
Task-number: QTBUG-23267
Change-Id: Id257c2e10e8e750a4b68cd2995c2ac4b70f8910c
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
|
|/
|
|
|
|
|
|
| |
List functions matching the command line parameter instead
of dumping all functions.
Change-Id: Ic504587b1036f09702f47579f90406333c4efbeb
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
|
|
|
|
|
|
|
|
|
| |
MinGW-64 defines _CrtSetReportMode, but only as a noop, resulting
in a warning "statement has no effect [-Wunused-value]"
Change-Id: I6e509246134dd5929b23b07abdb6d705db603793
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
qCompare() was both overloaded and specialised, but always as a template.
This lead to the QIcon specialisation actually invoking
qCompare(QFlags<void*>, ...)
when specifically asking for qCompare<void*>() (detected by adding
underlying-type detection to QFlags).
Fix by preferring overloading and not specialising anything.
Change-Id: Ie001ebb9dfb0847c6c33a3f45177a61579fd61ee
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
|
|
|
|
|
|
|
|
| |
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The documentation for QTest::qExec states that command line arguments
are optional and gives the following example:
MyTestObject test1;
QTest::qExec(&test1);
However, running this example leads to crash as argv[0] is accessed
without testing argc. This change fixes this bug.
Change-Id: I2ec016e02869d21b24bc11f1851a760036640191
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
|
|
|
|
|
|
|
| |
The QWindow* overload was introduced for Qt 5.0, but is unused already.
Change-Id: Ic07f19eac87bc93a589017407668760fceb2f632
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Use \b instead of \bold
* widnow -> window typo
* QTest::touchEvent's second parameter is QTouchDevice *, not
QTouchEvent::DeviceType, and autoCommit defaults to true
* QSignalSpy::wait() isn't const
Change-Id: I75a91c1cd98b1c582cd654b2b72ad61e5c0e31d2
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
|
|
|
|
|
| |
Except where using the contents of the variable, in which case
collapse two calls to qgetenv() for the same variable into one
that stores the result in a temporary QByteArray and continues
working with that one instead.
Change-Id: I6c09a20ae946327ccb85e4833a60a373a8a07355
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
| |
Change-Id: I1f3b49e3dee19bf0b1d2933c6e6ad7972186e0d0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
| |
Change-Id: Iad52a5c44b27cb11a47987c9f8890cc67b557fb7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
|
|
| |
Task-Id: QTBUG-24502
Change-Id: I360dee4dc68c165de0631ce4cf34e76fd873080e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
| |
This change moves the snippets to the modularized directories.
Change-Id: I917dd1dae5ee5d4b6bd5a0390783a8b9a99edc06
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
|
|
|
|
|
| |
Change-Id: I2a8f88929f985b1543ec7c223266e8387f0a8a48
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use QMetaMethod::name() instead of parsing the signature.
Use QMetaMethod::returnType() instead of checking the length of
typeName().
Use QMetaMethod::parameterCount() instead of checking the
size of parameterTypes().
Change-Id: I424370b19b5b150865377666dca0fba5f29ad30f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
| |
Change-Id: Ic98faf360a713ac698f9bf1ff8aaad5a4c5c176b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|\
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/corelib/tools/qvector.h
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp
Change-Id: I877256e95f3788e617437f4e9661a88047f38cd6
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
qWaitForWindowShown() should check window->isActive() instead of
window->isExposed() and return false if timeout.
Add two new qWaitForWindowActive() and qWaitForWindowExposed()
functions.
Change-Id: Idd9601805c2e84b0d36ddd5471031b627d289953
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
|
|\|
| |
| |
| |
| |
| |
| | |
Conflicts:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp
Change-Id: I884afc3b6d65c6411733a897a1949e19393573a7
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Previously, verbose (-v2) and XPASS test output showed all QCOMPAREs as
"COMPARE()", making it impossible to see what was compared and difficult
to match the output to the source of a test containing many calls to
QCOMPARE.
This commit changes testlib's internal compare_helper API so that string
representations of the compared expressions are always passed to
QTestResult::compare() when available, and can thus be shown in the
verbose and XPASS output. The XPASS output has also been changed to
state explicitly that the comparison succeeded unexpectedly, bringing it
in line with the XPASS output resulting from a call to QVERIFY.
This commit also changes all calls to compare_helper() to call the
eight-argument version of the function, which simplifies much of the
calling code. The now obsolete four-argument version of
compare_helper() has been changed to output a warning that it is
obsolete. It will be removed once other modules have had some time to
catch up.
The improved XPASS and verbose output is demonstrated by the expectfail
and verbose2 selftests.
Change-Id: I8baa46d5dd30e6c43b26f366c34dc5b64aab5f7c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
| |
| |
| |
| |
| | |
Change-Id: I72740e394bfe2a95f5b48566b29c9ef9200a8035
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|\|
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/corelib/kernel/qmetaobject.cpp
src/corelib/kernel/qvariant.cpp
src/tools/moc/moc.h
Change-Id: I2cd3d95b41d2636738c6b98064864941e3b0b4e6
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
QDoc now has support for Doxygen style commands for italics, bold
and list items. This change applies that change in QDoc to the
actual documentation.
Task-number: QTBUG-24578
Change-Id: I519bf9c29b14092e3ab6067612f42bf749eeedf5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
|
| |
| |
| |
| |
| |
| |
| |
| | |
Change the help output to show which options only work for plain text
logging.
Change-Id: I39eb7cd0793cdbe553c230334c6cd532b4929f61
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the silent logging mode suppressed passes, skips and internal
testlib info messages, but did not suppress debugging output, making it
hard to see the fails in a noisy test. This commit changes silent mode
so that it suppresses all output except test failures and fatal errors,
making silent mode truly useful for seeing just the important test
output.
This commit also adds a selftest to verify the behaviour of silent mode.
Change-Id: I75420aead03682306210746a87e2a3b608b58fc6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
| |
Change-Id: I8f7060c41df1e0bf1a8c35930400a31a4239a3d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Call it from qtest_qParseArgs() instead of qExec(). This will allow to
remove the code coverage calls from quicktest.
Both the installation and the saving of code coverage data are now
gathered in testlib.
Change-Id: If3baedb0cff9d894e6f232b947af7e3158703d9d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
|
|
|
|
|
|
|
|
|
| |
as QChar is actually an ushort and there is no point in taking its
address.
Merge-request: 69
Change-Id: Idcc9d621e5627514ade006aa12a789a88929d48b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Prior to this commit, a benchmark test could report 0..n passes and 0..m
fails or skips, where n is the number of accumulation iterations used to
collect benchmark data and m is the number of times the test function
was invoked. Depending on the type of benchmark measurer being used,
this could result in a very large volume of test output and inconsistent
pass, fail and skip counts between test runs.
This commit changes the behaviour so that each benchmark test reports
one pass, fail or skip, regardless of the number of iterations used to
collect benchmark data.
This commit also prevents benchmark data being reported in the test
output if the benchmark test failed or skipped, as any benchmark data is
of dubious value in such cases.
The latter change in behaviour requires a minor modification to the
badxml selftest, which now tests quoting of literal strings in xml test
output for both passing and failing benchmarks.
Finally, this commit also adds a new selftest specifically for verifying
correct behaviour for benchmarks that fail or skip.
Task-number: QTBUG-24313
Change-Id: I3426dc659a7511b62fd183a031c7235bc753f497
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Prior to this commit, the following statement in the qtestlib
documentation was untrue: "If init() fails, the following testfunction
will not be executed, the test will proceed to the next testfunction."
If init() called QSKIP, the test function would be skipped, but if
init() reported a failure, the test function would still be executed
(even though doing so could be unsafe).
This commit makes testlib skip a test function if init() reports a
failure and enhances the selftests to cover skips and fails in both
init() and cleanup().
Task-number: QTBUG-20371
Change-Id: Id1cc8464ae0b8c257ae1b74dbe9189a501f5366b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
|
|
|
| |
Testlib no longer does anything with the test location, and neither do
any of Qt's tests, so the code is no longer needed.
Change-Id: I1a464116179f3e26efadad6901f00f3c33e0ce84
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some headers and constants are available in MinGW-w64 that are not
available in the official MinGW. STATE_SYSTEM_HASPOPUP and
STATE_SYSTEM_PROTECTED constants are defined if they are not already
defined by including oleacc.h. _CrtSetReportMode is not used and
crtdbg.h is not included when using official MinGW as crtdbg.h is
missing from official MinGW.
Change-Id: Ie7f3f3726a1663d0fdeb6ee17b86873ae3f61860
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
|