summaryrefslogtreecommitdiffstats
path: root/tests/auto/network
Commit message (Collapse)AuthorAgeFilesLines
...
* tests: use contains(QT_CONFIG,private_tests) consistentlySergio Ahumada2012-01-022-5/+9
| | | | | | | | | | | | | | These tests used requires(contains(QT_CONFIG,private_tests)) in their .pro file, but did not subtract themselves from their parent project SUBDIRS when private_tests weren't enabled. In the best case, this wastes a little time as qmake iterates over these projects which won't be built. In some worse esoteric cases, this may break compilation or packaging. Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Flag udpTest as insignificant, fails on Ubuntu 11.10 x64.Toby Tomkins2011-12-301-0/+3
| | | | | | | | | | This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro file so test is ignored on this platform. Task-number: QTBUG-23380 Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remove mention of Trolltech in QHttp autotest.Jason McDonald2011-12-283-4/+4
| | | | | | | | | | The data file named "trolltech" has nothing specific to Trolltech in its contents. Rename it to "testhtml". The lack of a file extension is intentional. Task-number: QTBUG-19653 Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* network auto tests: add QNetworkReply test for pipeliningPeter Hartmann2011-12-251-0/+39
| | | | | | | | | Reviewed-by: Markus Goetz Task-number: QTBUG-21369 (cherry picked from commit a32bfdef6d6b45c916f143dcf8495a2e102c3eec) Change-Id: Iecde23c56f128008c5172675601928d83180358a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix http authentication to a different realm on the same serverShane Kearns2011-12-221-0/+33
| | | | | | | | | | This is a regression caused by the NTLMv2 authentication patch. I have manually tested NTLMv2 authentication against MS IIS and reverting these two lines does not break it. Task-number: QT-5209 Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38 Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Test case for QTBUG-22875Shane Kearns2011-12-221-1/+188
| | | | | | | | | | | | | Test the authentication cache works properly with "cancelled dialogs" or if the user enters username/password incorrectly. Expected behaviour is based on web browsers: If cancelled, current request fails, and prompt again the next time. If wrong password is given, prompt again and retry the current request. If bad credentials are in the cache, prompt again Task-number: QTBUG-22875 Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25 Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Fix QNetworkReply test cases that use the MiniHttpServer on windowsShane Kearns2011-12-191-1/+1
| | | | | | | | | | | | | The "happy eyeballs" connection code means that IPv4 and IPv6 connections are both attempted for a http request. For a normal http server, this is no problem, but the MiniHttpServer in the test code is very simplistic and cannot cope with more than one client connected at the same time. On windows this causes all these tests to fail with timeouts. Changed the MiniHttpServer to listen on IPv4 only instead of Any address. Change-Id: I81e249997d894d266001da474a351b1f5642599e Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* fix QMutex warning in tst_QLocalSocket::threadedConnectionJoerg Bornemann2011-12-151-0/+1
| | | | | Change-Id: I5728af1944e44bd976e51d4f0c0a923deacbeea0 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
* Remove QtWidgets dependency from QTcpSocket autotestShane Kearns2011-12-093-33/+12
| | | | | | | | | | | | | | QMessageBox was being used to test nested event loops. This has been changed to use QEventLoop directly. Also, there was an unnecessary use of QPushButton to trigger a test case, which has been removed. As a result, 3 test cases can be run on VXWORKS, and one more test case on Windows that were previously skipped. Change-Id: Ic65ed441cd37d242f89df3ef3b8638a1458d9cf3 Reviewed-by: Robin Burchell <robin+qt@viroteck.net> Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
* Fix unstable test caseShane Kearns2011-12-092-2/+1
| | | | | | | | | | | | | tst_QTcpSocket::disconnectWhileLookingUp required the host lookup + connect + disconnect procedure to complete in <50ms, which is not always true. When disconnecting (rather than aborting with close()), wait for the disconnection to complete with a timeout of 5 seconds. Task-number: QTBUG-21043 Change-Id: I3b59abf9a8eb2c6d99416e1a8ec6b528885b656e Reviewed-by: Robin Burchell <robin+qt@viroteck.net> Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
* Fix failing setSocketDescriptor test in QTcpSocketShane Kearns2011-12-091-0/+1
| | | | | | | | | | setSocketDescriptor fails because socket is in the wrong state. This is timing dependent, if qt-test-server is still in the DNS cache then the test failed. - clear the DNS cache to avoid the host lookup state being skipped. Change-Id: If159d514b1aa9b62a4834f6352d5e7b0a00a5724 Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Check we're connected before startClientEncryption()Richard Moore2011-12-071-0/+13
| | | | | | | | | The docs say this is required, but we don't check it and instead segfault right now. Change-Id: I825b00a312a481c5383af127333c0c4698188348 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Skip untestable interfaces in QTcpSocket::bind autotestShane Kearns2011-12-061-1/+5
| | | | | | | | | | | | | | | bind() test failed if there is an autoconfigured IPv4 address. e.g. bluetooth adaptor that is not attached to a network. Or WLAN adaptor in peer-peer mode. - solved by skipping the autoconfigured IPv4 addresses in the same way as IPv6 addresses are already skipped bind() test fails for proxy - skipped, QTBUG-22964 created Change-Id: I9a799ae8db421783f474e97cf876d6e265516397 Reviewed-by: Robin Burchell <robin+qt@viroteck.net> Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Remove TESTED_CLASS/TESTED_FILES comments from tests.Jason McDonald2011-12-0613-34/+0
| | | | | | | | | These comments were mostly empty or inaccurate. Appropriate naming of tests and appropriate placement of tests within the directory tree provide more reliable indicators of what is being tested. Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Fix QTcpServer::serverAddress() for dual stack socketsShane Kearns2011-12-012-1/+39
| | | | | | | | | | When listening on QHostAddress::Any, serverAddress() should return QHostAddress::Any too, assuming that setting the socket options was successful. Task-number: QTBUG-22899 Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix QHostAddress::operator==(QHostAddress::SpecialAddress)Shane Kearns2011-11-301-0/+4
| | | | | | | | | QHostAddress(QHostAddress::Any) was not equal to QHostAddress::Any because only one of the operator== overloads was handling this. Task-number: QTBUG-22898 Change-Id: Ifd36947a50e8c36362b4e850fd8d5105ee0925ff Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Make the default ssloptions testable.Richard Moore2011-11-291-0/+5
| | | | | | | | | Centralise the specification of the default ssloptions to make the code clearer and more testable. Change-Id: I4f4bae72736dd063ee4cd64c6375e82d0600a105 Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com> Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
* Fix sanity check of network test serverJason McDonald2011-11-2816-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of Qt's autotests depend on access to a test server. For each test that used the test server, tests/auto/network-settings.h created a global object to verify at startup that host lookups to the test server will succeed (and abort the test otherwise). There are two problems with that approach: First, the sanity check happens before main(), and thus before the test framework has started logging test results. This means that if the sanity check aborts the test, the failure message will not be visible in the test output if logging to a file or will cause the output to be malformed if logging to the console in XML format. Second, since Qt 4.7, the host lookup uses a class that connects to the QCoreApplication instance, which doesn't exist before main(), and this caused all tests that included network-settings.h to output an error message from QObject::connect() at the beginning of the test. Both of these problems are solved by removing the global object from network-settings.h and instead performing the sanity check in the initTestCase() function of each test. Task-number: QTBUG-22876 Change-Id: Id49c1826906327bf571686cc11527f0265e5af44 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* tst_qsslsocket: improve failure messageRohan McGovern2011-11-211-1/+1
| | | | | | | | | Cast enum to int so that we get the actual and expected values in the failure message, rather than merely "Compared values are not the same". Change-Id: Idc20e050c2e8a07d70f839c0a45044b070c0900e Reviewed-by: Richard J. Moore <rich@kde.org> Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
* tst_qsslsocket: don't run SSLv2 tests when SSLv2 has been disabledRohan McGovern2011-11-211-0/+16
| | | | | | | | | SSLv2 may be disabled in openssl at compile time. If so, do not attempt to test it. Change-Id: I189c8fde5b5dc8e739d54cc1adde1d3e3e217391 Reviewed-by: Richard J. Moore <rich@kde.org> Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
* Don't depend on moc to disable test functions.Jason McDonald2011-11-184-45/+40
| | | | | | | | | | | | | | | | | | | | | The moc tool is not aware of all defines (particularly those that are compiler builtins) and does not correctly evaluate others that depend on compiler builtins, such as Q_OS_FOO. This commit reverts parts of the following commits, but is not a complete fix as there were many instances of this problem in the tests prior to those commits: 924d810dbdcd5b5b0fa860922b2487ea9062d002 8aaff6751038b88d17e23be6fcee945771297c5b 338d3f11973412047c2c9cd41cbd0c961d738ef3 a55034062ba2bf73a9f1ed3d9cf31745b38149e3 253497b7446c7d723aa3bdd7152e25d6852f2604 7cfad460c56319ba89c4a3a0bbcb2e54ab1cdbc6 9d2ff58f3642828e494e7e9b2df7dbb8e2cd408f 0cf6baa2d61ebaad2a2a0530c37f27e719b68f4b Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Improve the testability of QSslOptions.Richard Moore2011-11-171-0/+43
| | | | | | | | | | The handling of QSslOptions is complicated not only by the subject, but also by the fact that some of the openssl directives are negatives. This commit tries to separate the inherent complexity from the complexity of the api by allowing us to test them independently. Change-Id: Ieb9386c69dd9b0b49dc42e26b2878a301f26ded1 Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* SSL namespace: rename TlsV1 to TlsV1_0Peter Hartmann2011-11-161-17/+17
| | | | | | | | | | | | This is a source-incompatible change. TlsV1 is ambiguous; what is actually meant is TLS version 1.0. There are also TLS versions 1.1 and 1.2; we might want to add options for these once OpenSSL supports them (apparently they will be with OpenSSL version 1.0.1). Change-Id: I940d020b181b5fa528788ef0c3c47e8ef873796a Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
* Always use the hex format for certificate serial numbers.Richard Moore2011-11-151-1/+1
| | | | | | | | | In Qt 4.x the serial number is reported by a mixture of the hex value and the number, The hex is what is used by other tools, and we should do the same. Change-Id: Ia0361d43fb5b920d053c95e932e0c8a012436e5e Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* Deprecate QSslCertificate::isValid() replace with isBlacklisted()Richard Moore2011-11-141-4/+4
| | | | | | | | | | | Currently isValid wrongly gives the impression it checks a certificate for validity - it doesn't. It merely checks if the certificate dates are valid and if the certificate is blacklisted. Since it's already easy for users to check the dates, let's just give them access to the ability to check for blacklisting. Change-Id: I25be3bde6a01063034702a9574b28469bf4882cd Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* QNAM: Fix authentication cache when the password is in the URLOlivier Goffart2011-11-081-5/+83
| | | | | | | | | | | | | | | Two problems: - The signal cacheCredidentials was not connected in the synchronous case while it must be connected. (Regression when the threaded http was merged) - We cannot cache the credidentials when we proceed the url because at that point, we do not know the realm (this basically reverts 9bc5a32b875b812c3a706034c8c27614f86bd138) Task-number: QTBUG-18411 Change-Id: I8ea11fa23db4314c3f17ed06d2d7f9ee934ccdba Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
* SSL certificate extensions: add unit testsRichard Moore2011-11-061-0/+89
| | | | | | | | Added tests for each of the supported extensions, and also for the handling of unknown ones. Change-Id: I29e0a5c1a411f41c2a554293662a33b56f205c00 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Moved tests into network/ssl/Jo Asplin2011-11-025-2/+513
| | | | | | | | | | This commit moves qsslsocket_onDemandCertificates_member and qsslsocket_onDemandCertificates_static from tests/auto/ to tests/auto/network/ssl/. Change-Id: I1593e113016ce7bb7dffbee82f1196275784d0ac Reviewed-by: Holger Ihrig <holger.ihrig@nokia.com> Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
* Remove remains of qpa in tests.Friedemann Kleint2011-11-011-1/+1
| | | | | | | Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com> Change-Id: I41aed5290df5aebeb30ebf5d2796aca6c65980d1 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
* Move support for socket binding from QUdpSocket upstream to QAbstractSocket.Robin Burchell2011-10-311-0/+61
| | | | | | | | | This should be API-compatible with Qt 4, but is not ABI-compatible, due to removing the enum from QUdpSocket. Task-number: QTBUG-121 Change-Id: I967968c6cb6f96d3ab1d6300eadd5bde6154b300 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remove debug code from QLocalSocket autotest.Jason McDonald2011-10-311-7/+1
| | | | | | | | | Any test diagnostics that are useful should be part of the regular test output, as the CI system cannot switch on commented-out code when there is a test failure. Change-Id: Ie44b6ea8dd496857ea264f730148d3dc4f5c8324 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Doc: Fixing typoSergio Ahumada2011-10-261-2/+2
| | | | | | | Fix typos I was able to find in `tests/auto' directory. Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
* Re-enabled testsJo Asplin2011-10-263-6/+0
| | | | | | | | | | | | This commit re-enables tests that are assumed to be ok by now, since they: - Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829). - Did not have any known issues associated with them. Note that not all of these tests were disabled as a result of QTBUG-21402. Task-number: QTBUG-21402 Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Re-enabled tst_qhttpnetworkconnectionJo Asplin2011-10-261-2/+0
| | | | | | | | tst_qhttpnetworkconnection is fixed by 13df02ad044cca3c0414f5e34c57fe04b69b414c Task-number: QTBUG-20981 Change-Id: I5666dbafe09113a7ecc3680f7608f874d66e2c19 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* QNetworkReply autotest no longer needs private_testsShane Kearns2011-10-252-4/+1
| | | | | | | | | Due to clearAccessCache being made part of the public API in Qt5, this autotest can be run on normal Qt builds again Task-number: QTBUG-17312 Change-Id: I3b70237a28ed141ffb49762cc40c8a528f9be6a8 Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
* all remaining tests: eliminated usage of qttest_p4.prfRohan McGovern2011-10-2535-70/+94
| | | | | | | | | qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4. It enables various crufty undocumented magic, of dubious value. Stop using it, and explicitly enable the things from it which we want. Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12 Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
* Improve qhostinfo autotest on HPUX 11iJason McDonald2011-10-251-13/+9
| | | | | | | | | | | | | Several test functions use IPv6 reverse lookups, which evidently don't work on HPUX 11i, but only one of these tests was skipped on that platform and the others presumably fail. This commit also removes the commented-out test data and makes it easier to put some useful test data back. QTBUG-22287 records the fact that no real IPv6 hostnames are currently used in the reverseLookup test. Change-Id: Iff1ed1b725492bcc28ca4cb5f8e2dc106887c0b4 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Network - Add QHostAddress::isLoopback API.Shane Kearns2011-10-241-0/+40
| | | | | | | | | | | | The standard IPv4 loopback address is 127.0.0.1, however anything in the 127.0.0.0/8 range is also a loopback address. isLoopback returns true for any address that is in the IPv4 loopback address range, or is the single IPv6 loopback address ::1 Task-number: QTBUG-22246 Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3 Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
* Remove SkipMode parameter from QSKIP calls.Jason McDonald2011-10-2112-97/+77
| | | | | | | | | The previous commit removed SkipMode from the testlib APi. This commit removes the parameter from all calls to QSKIP. Task-number: QTBUG-21851, QTBUG-21652 Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Remove DEPENDS_ON from qtestlib API.Jason McDonald2011-10-191-12/+0
| | | | | | | | | | The DEPENDS_ON macro didn't do anything and has misled many users to think that they can write test functions that depend on other test functions. Task-number: QTBUG-21851 Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Move QTRY_VERIFY/QTRY_COMPARE into testlib.Jason McDonald2011-10-195-6/+0
| | | | | | | | These functions have lived in tests/shared/util.h for a long time, but they really belong in qtestlib. Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* fix tst_QNetworkReply::headFromHttp failureShane Kearns2011-10-121-3/+3
| | | | | | | | | The reference file has suffered whitespace changes during the cherry pick from 4.8. Refetched from the test server. Change-Id: I03a0b7a66cf6743de3391905422b2f4cdcd86dcf Reviewed-on: http://codereview.qt-project.org/6454 Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
* Fix platformsocketengine test failuresShane Kearns2011-10-121-4/+17
| | | | | | | | | | | | The platformsocketengine autotest uses the native socket engine directly rather than through QAbstractSocket. The bind tests were failing because the autotest was creating a socket with IPv4 (AF_INET) and then binding with QHostAddress::Any (AF_INET6). A linux kernel update caused this to start failing on the test machines. Change-Id: Iea62f3d56dbfb35fcb952dcf00313578eb2bd764 Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com> Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
* Avoid using QSKIP in lieu of compile-time checksJason McDonald2011-10-071-6/+3
| | | | | | | | | | | | | | | | QSKIP is intended to be used to skip test functions that are found at run-time to be inapplicable or unsafe. If a test function can be determined to be inapplicable at compile-time, the entire test function should be omitted instead of replacing the body of the test function with a QSKIP, which only serves to slow down test runs and to inflate test run-rates with empty, inapplicable tests. Task-number: QTQAINFRA-278 Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e Reviewed-on: http://codereview.qt-project.org/6128 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Create auto test for http HEAD requestShane Kearns2011-10-063-0/+65
| | | | | | | | | | | | This is in order to have a regression test for QT-5304. However the test is also checking basic functionality of head requests too. Task-Number: QT-5304 Change-Id: I0d98bd1f1125ffd49d9f3c859a51b2aaee95379a Reviewed-By: Martin Petersson Reviewed-on: http://codereview.qt-project.org/6033 Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
* Remove code to selectively run test functions.Jason McDonald2011-10-061-42/+3
| | | | | | | | | | | | | QTestLib already makes a superior version of this functionality available to all tests, without the need to recompile. Each qtestlib test program can be passed, via the command line, a list of test functions and test data tags to be executed instead of executing all test functions. Change-Id: I1b54fc70a0c58a17209817afabfb953b5748dac4 Reviewed-on: http://codereview.qt-project.org/6015 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Avoid using QSKIP in lieu of compile-time checksJason McDonald2011-10-048-70/+70
| | | | | | | | | | | | | | | | QSKIP is intended to be used to skip test functions that are found at run-time to be inapplicable or unsafe. If a test function can be determined to be inapplicable at compile-time, the entire test function should be omitted instead of replacing the body of the test function with a QSKIP, which only serves to slow down test runs and to inflate test run-rates with empty, inapplicable tests. Task-number: QTQAINFRA-278 Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a Reviewed-on: http://codereview.qt-project.org/5941 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Tests: Fix compilation on Windows.Friedemann Kleint2011-10-031-1/+1
| | | | | | | | | Replace Q_WS_... by Q_OS_... in corelib tests. Change-Id: I14c41dca1ec490b3c49ba2c24e60def14c6de9da Reviewed-on: http://codereview.qt-project.org/5778 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Remove Symbian-specific code from tests.Jason McDonald2011-09-2967-926/+71
| | | | | | | | | Symbian is not a supported platform for Qt5, so this code is no longer required. Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa Reviewed-on: http://codereview.qt-project.org/5657 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Disabled tests for refactor->master integrationJo Asplin2011-09-133-2/+5
| | | | | | | | | | | | | | | | | | | | | | | This change disables failing tests to increase the likelihood that 'make check' terminates with a zero exit status. This is done to prevent the CI system from blocking further commits once qtbase#refactor is merged into qtbase#master. Failing tests are marked as insignificant (by putting 'CONFIG += insignificant_test' in the .pro file). Note: This is a temporary measure that needs to be cleaned up once the refactor->master integration is complete. Ideally all disabled tests need to be enabled and passing. All changes will be marked by the string QTBUG-21402 in a comment for easy location. Task-number: QTBUG-21402 Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d Reviewed-on: http://codereview.qt-project.org/4678 Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com> Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-18 01:50:36 +0000