| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace the existing code in QProcess that dealt with signaling of child
processes exiting with forkfd and spawnfd. The previous code was
convoluted and hard to maintain, having shown its age in the last
year. I've been running it for a year and a half and the new
implementation is definitely an improvement.
This change replaces support for the QNX Neutrino spawn() call with the
POSIX version. We lose the ability to do setsid(), but we gain quite a
few ioctls() that were done to fill in the file descriptor mapping
structure. That's also the only OS for which we have the ability to
thread-safely chdir() before the call to spawnfd().
Another advantage is that forkfd does not require a dedicated thread
running to handle child processes exiting.
Change-Id: I5eb76821dfdb6a8ed2989d7f53b3c31e515c3174
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous implementation required one syscall per child we're waiting
on to see which one exited. That means the algorithm was O(n).
This implementation uses WNOWAIT to find out which child exited and then
goes straight to that one. So it's O(1) on the number of children, but
runs 2 * number_of_children_that_exited + 1 syscalls, assuming there are
no race conditions with other threads. If there are or if a child not
started by forkfd exits, we'll still iterate over each child we're
managing to see which one exited.
It modifies the existing code so that it will do a waitid() with WNOWAIT
to check on the status of the child: if the child has exited, we'll try
to lock the entry so only one thread will do the final wait(). In the
case we read the PID, then the child exited, was reaped by another
thread, the PID got recycled and that child exited again, we'll fail to
lock the ProcessInfo entry so no harm comes. If by an absurd coincidence
this other child was started by forkfd() and its ProcessInfo is exactly
the one we are looking at, then we'll succeed in locking but that's a
benign race: we'll do what the other thread was trying to do and the
other thread will give up.
Future improvements to the algorithm are discussed in the Gerrit change.
Change-Id: Ie74836dbc388cd9b3fa375a41a8d944602a32df1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The most common use case for QTextStream::readLine() is reading
a file line by line in a loop. The existing readLine() method
allocates new memory for each line, that results in a loss of
speed. The introduced overload can use already allocated memory.
Besides it allows you to not think about filesystem specifics.
The current QFile documentation suggests a separate way to read
files from /proc filesystem. With this overload it's possible
to use the same idiom in all cases:
QTextStream in(&file);
QString line;
while (in.readLine(&line)) {
process_line(line);
}
The idea was inspired by the blog post of Ivan Čukić:
http://ivan.fomentgroup.org/blog/2014/10/03/api-design-and-impact-on-the-performance-qt-vs-stl-example/
Change-Id: I0c62b4a52681870589bc099905e83ed69e03dd40
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
|
|
|
|
|
|
|
| |
rawMode only has an effect under X11 in pre-QPA times.
Change-Id: Iaff8fed8f4ae5af5dd0399bb3ebd9d590a39a758
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
|
|
|
|
|
|
|
|
|
| |
[ChangeLog][QtNetwork][QSslSocket] It is now possible to use TLS PSK
ciphersuites in client sockets.
Task-number: QTBUG-39077
Change-Id: I5523a2be33d46230c6f4106c322fab8a5afa37b4
Reviewed-by: Richard J. Moore <rich@kde.org>
|
|
|
|
|
|
|
|
|
|
| |
Equivalent of gluProject and gluUnproject.
[ChangeLog][QtCore][QVector3D] add convenience project and unproject methods
to use like gluProject and gluUnproject
Change-Id: I6e4e3e79ea6e34d1fb0c375e15185c950b699ef0
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
|
|
|
|
|
|
|
| |
Task-number: QTBUG-10153
Change-Id: I0420b9c59a7a437da28675349c14e84bfa4aea54
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
|
|
|
|
|
|
|
|
|
|
| |
This is like value(), but returns an iterator instead of the value().
[ChangeLog][QtCore][QAssociativeIterable] Added find().
Change-Id: I029fc8f91cef78f718d419587a2a50ffd2bf7632
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
|
|\ |
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
src/corelib/global/global.pri
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.h
src/corelib/tools/qdatetime.cpp
src/plugins/platforms/xcb/qxcbscreen.h
src/plugins/platforms/xcb/qxcbwindow.h
src/widgets/dialogs/qcolordialog.cpp
src/widgets/dialogs/qcolordialog_p.h
tools/configure/configureapp.cpp
Change-Id: Ie9d6e9df13e570da0a90a67745a0d05f46c532af
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The text edit that shows which flags we have set should be updated in
PreviewWindow::setWindowFlags() and PreviewWidget::setWindowFlags()
but QWidget::setWindowFlags() isn't virtual so only the base class
one was called.
Change-Id: I5c9d47d003d5701dde1ab63df0d349f641d66f44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The layout for an invalid block is very likely to be null, it
shouldn't be accessed without checking the block's validity first.
We can make the check a bit more conservative and simply check that
the block isn't empty.
Change-Id: Ic1459a6168b1b8ce36e9c6d019dc28653676efbe
Task-number: QTBUG-43562
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The QPageSize-based refactoring led to casting DevicePixel to a QPageSize::Unit
value of 6 (out of bounds). And then the switch in qt_nameForCustomSize
would leave the string empty, leading to "QString::arg: Argument missing: , 672"
warnings.
Change-Id: I85e97174cc8ead9beccaaa3ded6edfad80f8e360
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Selftests for testlib fail when executed in UTC timezone because local and
UTC are the same, but expected to be different. A custom timezone is used
instead.
Debug output of qCompare does only handle local and non-local timezones, using
new Qt5 features allows to show the correct timezone in format string.
Change-Id: I753884a12370952b7b62a90d62896db4f2d3d1b4
Reviewed-by: Jason McDonald <macadder1@gmail.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Output the current active/modal/popup windows when receiving
FocusAboutToChange or FocusIn events.
Task-number: QTBUG-42731
Change-Id: Ia88e9a9b41f7c80fb7a2a048b06da56d989ff18a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Until now, QSqlQuery::execBatch did not call resetBindCount, which lead
the next call to QSqlQuery::addBindValue to start at non zero index.
This is problematic in case of a prepared query which is called several
times.
Task-number: QTBUG-43874
Change-Id: I1a0f46e39b74d9538009967fd98a269e05aac6f2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This test requires test data to be available and the
testRetainSizeWhenHidden test assumes that a widget will be
sized based on its sizeHint(), which does not work on
platforms where show() implies showMaximized().
Change-Id: I9bf372d8c0ea94845ae08481ec555fe25dcfebc0
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This test needs to have a test environment available on the regular
file system, so we create this when initializing the test. In
addition we QEXPECT_FAIL one of the tests which seems to expose
a legitimate bug. A bug report has been created for this.
Change-Id: I7c90aea78a067815cb647a51db5d91a652a9fc1c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On Android, the HOME and TMPDIR environment variables both point
to the application sandbox, whereas the QSideBar test assumed
they were different. We work around this simply by creating
a new directory and using this as the test dir in place of the
home directory.
Change-Id: I67e01926b901ddf237b05aff116d30b6c7885535
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This requires building a command line tool and running it using
QProcess, which is not a supported deployment option on Android.
Change-Id: I795374bf809a8e4d8634a55f5ebf1699ee9745d1
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The auto-hinter in the FreeType version bundled in Qt gives
slightly different advances on some glyphs. As noted in
the removed code, this was already observed on Windows and QNX,
and recently also on Android.
I'm sure it could also happen on platforms using the system library
if the system library was the same version as the one bundled in Qt.
Instead of expect-failing the test, we simply accept both the
observed results as valid.
Note that we need to accept 9 as a result for the default hinting
preference on all platforms, not just Windows, since the default
hinting preference in FreeType can be a system setting.
Change-Id: I3cc0f33f0f66dd64419770b37c10dee457706b5e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The files for the test have to be included in a qrc to be available on
Android.
Most of the image files are already in a qrc, but a couple were missing.
We add this in a separate qrc to avoid interfering with the tests on
other platforms.
Change-Id: Ibb24f5015a1aba4d5622e14f7aae80bc18611ec4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The algorithm searches for all executables in search path starting with
"tst_". Tests are not named like the folder they are contained in
anymore.
Change-Id: I360f293e43e30292fe0ae6230fd3ec7abf3d632d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | | |
Change-Id: I57fc2f09a4e31e379c256dfe3f5d7546cdcf2b4b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
isnan is C99 and POSIX.1, which the older MSVC do not support. Use the
Qt equivalent.
Change-Id: Ic5d393bfd36e48a193fcffff13b8679cb83d12db
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Some of these tests are verifying things that are not supported
on Android, so we XFAIL these cases when we see the appropriate
error message.
Change-Id: I8245266f061c902515bb12251521159a8e19bfb7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Two serious mistakes:
- we need to call dbus_server_free_data_slot as many times as we call
dbus_server_allocate_data_slot
- we need to delete the d pointer...
The changes to the unit tests are simply to cause the used peer
connections to be removed so they don't show up in valgrind.
Change-Id: I9fd1ada5503db9ba481806c09116874ee81f450d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The window size was too small on high-DPI screens.
Save the default text color instead of setting it to black.
Change-Id: I78b50624110be0cb1d077d3782d421eb323f4fb0
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On e.g. Android, the tabs will be scaled by DPI. This breaks the
logic in the QTextLayout tests for tabs. It's not possible to
just scale the expected sizes either, since the whole text layout
will be affected by font sizes and scaling, and it's difficult to
predict where characters will land on different platforms and
resolutions.
To avoid breaking this test on other platforms, we just skip them
when we know they will break. Since the code tested is
cross-platform, this will hopefully not have any significant
impact on our coverage.
Change-Id: I65d6c33c9c6724665983a17f99eadcf1baedcc20
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Include test data on Android.
Change-Id: Ic0890495c0bf8d2e38595585226a03073b043d57
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Include test data on Android.
Change-Id: I35c17618d84822df126fe3462a00d3d49b1377c8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add all test data to resources.
Change-Id: I31b0dbb7546a15151f64523c86bf8eb687ff9ec0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We must add all test data to resources.
Change-Id: I1b18415cd53a27bd23e51ac6b738d3ed94162ac9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This adds the testdata to a qrc to make them available on Android.
There are still some failures which might be actual errors, and which
will be addressed separately.
Change-Id: I1bdcfb2c6676134ca52388d49a1b2d25cf2813f9
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
QWidget is polished when show() is called, so unless you do this
first, QWidget::font() will return a default constructed QFont,
and not necessarily the default specified in the platform theme.
Comparing this to QPainter::font() later, which has been resolved
against the platform theme font, and not the default constructed
font, you can get a mismatch and a false test failure. This
happened on Android.
Change-Id: I41ef5b10879bbd4bb8ef8d52ecaccf5e8e894075
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fixed a few instances of files that should be deployed to the
file system. The way we do this on Android is via qrc. We also
need a special case for the resources/test.txt, because
QFINDTESTDATA will find this in qrc, but that's not the one
we are looking for.
Change-Id: I7097e8b7795b3a8fd483adad090208f295478412
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The testdata needs to be in a qrc to be available on Android.
Note that a single test will still fail. Since this requires
a platform-independent fix, it will be committed separately.
Change-Id: Ib2438a3298d81d77b7f4f240ef045aa0500d8382
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We must add all test data to resources. Write output data into a writable location.
Change-Id: I5a1c212f6108abf2a82288a2c84cfb31eda5e101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
QVersionNumber will gain a small-version-number optimization, which
stores sequences of less than 4 (32bit) or 8 (64bit) 8-bit signed
segments inside the class instead of a QVector. Make sure the tests
cover those cases, too.
Change-Id: If1d875c75d284908756b305f767a7218cab5226f
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| | |
| | |
| | |
| | |
| | | |
Change-Id: I87e31945052233cee17460ee6f59c02ec416b27b
Reviewed-by: Richard J. Moore <rich@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The change 35bc3dc45aacaf36a8bdfccc7627136cc2e5b185 moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There's a change in Qt 5.4.0 that makes Qt compile with its own set of
D-Bus headers, which means QT_CFLAGS_DBUS may be empty. Thus, we can't
compile or link if we're using the actual libdbus-1 API to build the
test.
This commit makes these unit tests use the same dynamic loading
mechanism.
Change-Id: I56b2a7320086ef88793f6552cb54ca6224010451
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
|
| | |
| | |
| | |
| | |
| | |
| | | |
Change-Id: I1086e6cd6534dc96311e981cc9c73f501c1128ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The error of "Not connected".
This incidentally solves a crash when QDBusServer().lastError() is
called but libdbus-1 couldn't be found.
Change-Id: Id93f447d00c0aa6660d4528c4bbce5998d9186a8
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On the unit test side, everything is sequential: we first ask for the
connection, verify that it is connected, then ask the remote side via
the session bus if it is connected. Unfortunately, the remote site may
handle things in a different order: it may handle the incoming function
call to "isConnected" before doing accept(2) on the listening socket.
So, instead, make the local side block until the connection is received
on the other side. On the remote, we don't block, instead we use the
feature of delayed replies.
Change-Id: Ie386938b8b39dd94a9d7e5913668125fb4a3c7da
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Include test data in qrc when building on Android.
Change-Id: I611ca24fe8764eb709b6ce27e814840ea919d4f1
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Skip the tests that require building and deploying an external
command line application, since that's not how we do things on
Android, and it's really not very relevant for that platform.
Change-Id: I2c1985687e25fb0cf124b1d57c8ba60e37d2ff96
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On Android the POSIX implementation of QCollator is used, and
this does not support setting other locales than the default.
Change-Id: I25d23949341fc555e8be4f6836ae68cc8813cc46
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Include test data in qrc when building on Android.
Change-Id: Id80623324788dac21bd5ddbeef8108f54d6bc8f7
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Include test data in qrc so it can be found on Android.
Change-Id: Iaca8422120f1ef842aafeb0cc209cb9fdd70f05f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
|