From 9ff34b3a088867d66daa782a4d5dbed99cd8ede4 Mon Sep 17 00:00:00 2001 From: Giuseppe D'Angelo Date: Tue, 5 Jan 2016 12:44:07 +0100 Subject: PCRE2: remove PCRE1 code Change-Id: I83cf7c22fe95fb6384b751d09867633a72f093db Reviewed-by: Thiago Macieira --- src/3rdparty/pcre/sljit/sljitConfigInternal.h | 724 -------------------------- 1 file changed, 724 deletions(-) delete mode 100644 src/3rdparty/pcre/sljit/sljitConfigInternal.h (limited to 'src/3rdparty/pcre/sljit/sljitConfigInternal.h') diff --git a/src/3rdparty/pcre/sljit/sljitConfigInternal.h b/src/3rdparty/pcre/sljit/sljitConfigInternal.h deleted file mode 100644 index 9275b14992..0000000000 --- a/src/3rdparty/pcre/sljit/sljitConfigInternal.h +++ /dev/null @@ -1,724 +0,0 @@ -/* - * Stack-less Just-In-Time compiler - * - * Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, are - * permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SLJIT_CONFIG_INTERNAL_H_ -#define _SLJIT_CONFIG_INTERNAL_H_ - -/* - SLJIT defines the following architecture dependent types and macros: - - Types: - sljit_s8, sljit_u8 : signed and unsigned 8 bit integer type - sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type - sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type - sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer - sljit_p : unsgined pointer value (usually the same as sljit_uw, but - some 64 bit ABIs may use 32 bit pointers) - sljit_f32 : 32 bit single precision floating point value - sljit_f64 : 64 bit double precision floating point value - - Macros for feature detection (boolean): - SLJIT_32BIT_ARCHITECTURE : 32 bit architecture - SLJIT_64BIT_ARCHITECTURE : 64 bit architecture - SLJIT_LITTLE_ENDIAN : little endian architecture - SLJIT_BIG_ENDIAN : big endian architecture - SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) - SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information - - Constants: - SLJIT_NUMBER_OF_REGISTERS : number of available registers - SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers - SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers - SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers - SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers - SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index - SLJIT_F32_SHIFT : the shift required to apply when accessing - a single precision floating point array by index - SLJIT_F64_SHIFT : the shift required to apply when accessing - a double precision floating point array by index - SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET) - SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address - - Other macros: - SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT - SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) -*/ - -/*****************/ -/* Sanity check. */ -/*****************/ - -#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ - || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ - || (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ - || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ - || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ - || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ - || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ - || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ - || (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ - || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ - || (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ - || (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ - || (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ - || (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) -#error "An architecture must be selected" -#endif - -#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ - + (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ - + (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ - + (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ - + (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ - + (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ - + (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ - + (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ - + (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ - + (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ - + (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ - + (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ - + (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ - + (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 -#error "Multiple architectures are selected" -#endif - -/********************************************************/ -/* Automatic CPU detection (requires compiler support). */ -/********************************************************/ - -#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) - -#ifndef _WIN32 - -#if defined(__i386__) || defined(__i386) -#define SLJIT_CONFIG_X86_32 1 -#elif defined(__x86_64__) -#define SLJIT_CONFIG_X86_64 1 -#elif defined(__arm__) || defined(__ARM__) -#ifdef __thumb2__ -#define SLJIT_CONFIG_ARM_THUMB2 1 -#elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) -#define SLJIT_CONFIG_ARM_V7 1 -#else -#define SLJIT_CONFIG_ARM_V5 1 -#endif -#elif defined (__aarch64__) -#define SLJIT_CONFIG_ARM_64 1 -#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) -#define SLJIT_CONFIG_PPC_64 1 -#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) -#define SLJIT_CONFIG_PPC_32 1 -#elif defined(__mips__) && !defined(_LP64) -#define SLJIT_CONFIG_MIPS_32 1 -#elif defined(__mips64) -#define SLJIT_CONFIG_MIPS_64 1 -#elif defined(__sparc__) || defined(__sparc) -#define SLJIT_CONFIG_SPARC_32 1 -#elif defined(__tilegx__) -#define SLJIT_CONFIG_TILEGX 1 -#else -/* Unsupported architecture */ -#define SLJIT_CONFIG_UNSUPPORTED 1 -#endif - -#else /* !_WIN32 */ - -#if defined(_M_X64) || defined(__x86_64__) -#define SLJIT_CONFIG_X86_64 1 -#elif defined(_ARM_) -#define SLJIT_CONFIG_ARM_V5 1 -#else -#define SLJIT_CONFIG_X86_32 1 -#endif - -#endif /* !WIN32 */ -#endif /* SLJIT_CONFIG_AUTO */ - -#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) -#undef SLJIT_EXECUTABLE_ALLOCATOR -#endif - -/******************************/ -/* CPU family type detection. */ -/******************************/ - -#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ - || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) -#define SLJIT_CONFIG_ARM_32 1 -#endif - -#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) -#define SLJIT_CONFIG_X86 1 -#elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) -#define SLJIT_CONFIG_ARM 1 -#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) -#define SLJIT_CONFIG_PPC 1 -#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) -#define SLJIT_CONFIG_MIPS 1 -#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) -#define SLJIT_CONFIG_SPARC 1 -#endif - -/**********************************/ -/* External function definitions. */ -/**********************************/ - -#if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED) - -/* These libraries are needed for the macros below. */ -#include -#include - -#endif /* SLJIT_STD_MACROS_DEFINED */ - -/* General macros: - Note: SLJIT is designed to be independent from them as possible. - - In release mode (SLJIT_DEBUG is not defined) only the following - external functions are needed: -*/ - -#ifndef SLJIT_MALLOC -#define SLJIT_MALLOC(size, allocator_data) malloc(size) -#endif - -#ifndef SLJIT_FREE -#define SLJIT_FREE(ptr, allocator_data) free(ptr) -#endif - -#ifndef SLJIT_MEMMOVE -#define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len) -#endif - -#ifndef SLJIT_ZEROMEM -#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) -#endif - -/***************************/ -/* Compiler helper macros. */ -/***************************/ - -#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) - -#if defined(__GNUC__) && (__GNUC__ >= 3) -#define SLJIT_LIKELY(x) __builtin_expect((x), 1) -#define SLJIT_UNLIKELY(x) __builtin_expect((x), 0) -#else -#define SLJIT_LIKELY(x) (x) -#define SLJIT_UNLIKELY(x) (x) -#endif - -#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ - -#ifndef SLJIT_INLINE -/* Inline functions. Some old compilers do not support them. */ -#if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 -#define SLJIT_INLINE -#else -#define SLJIT_INLINE __inline -#endif -#endif /* !SLJIT_INLINE */ - -#ifndef SLJIT_NOINLINE -/* Not inline functions. */ -#if defined(__GNUC__) -#define SLJIT_NOINLINE __attribute__ ((noinline)) -#else -#define SLJIT_NOINLINE -#endif -#endif /* !SLJIT_INLINE */ - -#ifndef SLJIT_UNUSED_ARG -/* Unused arguments. */ -#define SLJIT_UNUSED_ARG(arg) (void)arg -#endif - -/*********************************/ -/* Type of public API functions. */ -/*********************************/ - -#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) -/* Static ABI functions. For all-in-one programs. */ - -#if defined(__GNUC__) -/* Disable unused warnings in gcc. */ -#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) -#else -#define SLJIT_API_FUNC_ATTRIBUTE static -#endif - -#else -#define SLJIT_API_FUNC_ATTRIBUTE -#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ - -/****************************/ -/* Instruction cache flush. */ -/****************************/ - -#if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) -#if __has_builtin(__builtin___clear_cache) - -#define SLJIT_CACHE_FLUSH(from, to) \ - __builtin___clear_cache((char*)from, (char*)to) - -#endif /* __has_builtin(__builtin___clear_cache) */ -#endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */ - -#ifndef SLJIT_CACHE_FLUSH - -#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) - -/* Not required to implement on archs with unified caches. */ -#define SLJIT_CACHE_FLUSH(from, to) - -#elif defined __APPLE__ - -/* Supported by all macs since Mac OS 10.5. - However, it does not work on non-jailbroken iOS devices, - although the compilation is successful. */ - -#define SLJIT_CACHE_FLUSH(from, to) \ - sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) - -#elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))) - -#define SLJIT_CACHE_FLUSH(from, to) \ - __builtin___clear_cache((char*)from, (char*)to) - -#elif defined __ANDROID__ - -/* Android lacks __clear_cache; instead, cacheflush should be used. */ - -#define SLJIT_CACHE_FLUSH(from, to) \ - cacheflush((long)(from), (long)(to), 0) - -#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) - -/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ -#define SLJIT_CACHE_FLUSH(from, to) \ - ppc_cache_flush((from), (to)) -#define SLJIT_CACHE_FLUSH_OWN_IMPL 1 - -#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) - -/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ -#define SLJIT_CACHE_FLUSH(from, to) \ - sparc_cache_flush((from), (to)) -#define SLJIT_CACHE_FLUSH_OWN_IMPL 1 - -#else - -/* Calls __ARM_NR_cacheflush on ARM-Linux. */ -#define SLJIT_CACHE_FLUSH(from, to) \ - __clear_cache((char*)(from), (char*)(to)) - -#endif - -#endif /* !SLJIT_CACHE_FLUSH */ - -/******************************************************/ -/* Integer and floating point type definitions. */ -/******************************************************/ - -/* 8 bit byte type. */ -typedef unsigned char sljit_u8; -typedef signed char sljit_s8; - -/* 16 bit half-word type. */ -typedef unsigned short int sljit_u16; -typedef signed short int sljit_s16; - -/* 32 bit integer type. */ -typedef unsigned int sljit_u32; -typedef signed int sljit_s32; - -/* Machine word type. Enough for storing a pointer. - 32 bit for 32 bit machines. - 64 bit for 64 bit machines. */ -#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) -/* Just to have something. */ -#define SLJIT_WORD_SHIFT 0 -typedef unsigned long int sljit_uw; -typedef long int sljit_sw; -#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ - && !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ - && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ - && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ - && !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) -#define SLJIT_32BIT_ARCHITECTURE 1 -#define SLJIT_WORD_SHIFT 2 -typedef unsigned int sljit_uw; -typedef int sljit_sw; -#else -#define SLJIT_64BIT_ARCHITECTURE 1 -#define SLJIT_WORD_SHIFT 3 -#ifdef _WIN32 -typedef unsigned __int64 sljit_uw; -typedef __int64 sljit_sw; -#else -typedef unsigned long int sljit_uw; -typedef long int sljit_sw; -#endif -#endif - -typedef sljit_uw sljit_p; - -/* Floating point types. */ -typedef float sljit_f32; -typedef double sljit_f64; - -/* Shift for pointer sized data. */ -#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT - -/* Shift for double precision sized data. */ -#define SLJIT_F32_SHIFT 2 -#define SLJIT_F64_SHIFT 3 - -#ifndef SLJIT_W - -/* Defining long constants. */ -#if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) -#define SLJIT_W(w) (w##ll) -#else -#define SLJIT_W(w) (w) -#endif - -#endif /* !SLJIT_W */ - -/*************************/ -/* Endianness detection. */ -/*************************/ - -#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) - -/* These macros are mostly useful for the applications. */ -#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ - || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) - -#ifdef __LITTLE_ENDIAN__ -#define SLJIT_LITTLE_ENDIAN 1 -#else -#define SLJIT_BIG_ENDIAN 1 -#endif - -#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ - || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) - -#ifdef __MIPSEL__ -#define SLJIT_LITTLE_ENDIAN 1 -#else -#define SLJIT_BIG_ENDIAN 1 -#endif - -#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) - -#define SLJIT_BIG_ENDIAN 1 - -#else -#define SLJIT_LITTLE_ENDIAN 1 -#endif - -#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ - -/* Sanity check. */ -#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) -#error "Exactly one endianness must be selected" -#endif - -#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) -#error "Exactly one endianness must be selected" -#endif - -#ifndef SLJIT_UNALIGNED - -#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ - || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ - || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ - || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ - || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ - || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ - || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) -#define SLJIT_UNALIGNED 1 -#endif - -#endif /* !SLJIT_UNALIGNED */ - -#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) -/* Auto detect SSE2 support using CPUID. - On 64 bit x86 cpus, sse2 must be present. */ -#define SLJIT_DETECT_SSE2 1 -#endif - -/*****************************************************************************************/ -/* Calling convention of functions generated by SLJIT or called from the generated code. */ -/*****************************************************************************************/ - -#ifndef SLJIT_CALL - -#if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION) - -/* Force cdecl. */ -#define SLJIT_CALL - -#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) - -#if defined(__GNUC__) && !defined(__APPLE__) - -#define SLJIT_CALL __attribute__ ((fastcall)) -#define SLJIT_X86_32_FASTCALL 1 - -#elif defined(_MSC_VER) - -#define SLJIT_CALL __fastcall -#define SLJIT_X86_32_FASTCALL 1 - -#elif defined(__BORLANDC__) - -#define SLJIT_CALL __msfastcall -#define SLJIT_X86_32_FASTCALL 1 - -#else /* Unknown compiler. */ - -/* The cdecl attribute is the default. */ -#define SLJIT_CALL - -#endif - -#else /* Non x86-32 architectures. */ - -#define SLJIT_CALL - -#endif /* SLJIT_CONFIG_X86_32 */ - -#endif /* !SLJIT_CALL */ - -#ifndef SLJIT_INDIRECT_CALL -#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \ - || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) -/* It seems certain ppc compilers use an indirect addressing for functions - which makes things complicated. */ -#define SLJIT_INDIRECT_CALL 1 -#endif -#endif /* SLJIT_INDIRECT_CALL */ - -/* The offset which needs to be substracted from the return address to -determine the next executed instruction after return. */ -#ifndef SLJIT_RETURN_ADDRESS_OFFSET -#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) -#define SLJIT_RETURN_ADDRESS_OFFSET 8 -#else -#define SLJIT_RETURN_ADDRESS_OFFSET 0 -#endif -#endif /* SLJIT_RETURN_ADDRESS_OFFSET */ - -/***************************************************/ -/* Functions of the built-in executable allocator. */ -/***************************************************/ - -#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) -SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); -SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); -SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); -#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) -#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) -#endif - -/**********************************************/ -/* Registers and locals offset determination. */ -/**********************************************/ - -#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) - -#define SLJIT_NUMBER_OF_REGISTERS 10 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 -#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL) -#define SLJIT_LOCALS_OFFSET_BASE ((2 + 4) * sizeof(sljit_sw)) -#else -/* Maximum 3 arguments are passed on the stack, +1 for double alignment. */ -#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1 + 4) * sizeof(sljit_sw)) -#endif /* SLJIT_X86_32_FASTCALL */ - -#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) - -#ifndef _WIN64 -#define SLJIT_NUMBER_OF_REGISTERS 12 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 -#define SLJIT_LOCALS_OFFSET_BASE (sizeof(sljit_sw)) -#else -#define SLJIT_NUMBER_OF_REGISTERS 12 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 -#define SLJIT_LOCALS_OFFSET_BASE ((4 + 2) * sizeof(sljit_sw)) -#endif /* _WIN64 */ - -#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) - -#define SLJIT_NUMBER_OF_REGISTERS 11 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 -#define SLJIT_LOCALS_OFFSET_BASE 0 - -#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) - -#define SLJIT_NUMBER_OF_REGISTERS 11 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 -#define SLJIT_LOCALS_OFFSET_BASE 0 - -#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) - -#define SLJIT_NUMBER_OF_REGISTERS 25 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 -#define SLJIT_LOCALS_OFFSET_BASE (2 * sizeof(sljit_sw)) - -#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) - -#define SLJIT_NUMBER_OF_REGISTERS 22 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 -#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX) -#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw)) -#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) -/* Add +1 for double alignment. */ -#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw)) -#else -#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw)) -#endif /* SLJIT_CONFIG_PPC_64 || _AIX */ - -#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) - -#define SLJIT_NUMBER_OF_REGISTERS 17 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 -#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) -#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw)) -#else -#define SLJIT_LOCALS_OFFSET_BASE 0 -#endif - -#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) - -#define SLJIT_NUMBER_OF_REGISTERS 18 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 -#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) -/* Add +1 for double alignment. */ -#define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw)) -#endif - -#elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) - -#define SLJIT_NUMBER_OF_REGISTERS 10 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 5 -#define SLJIT_LOCALS_OFFSET_BASE 0 - -#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) - -#define SLJIT_NUMBER_OF_REGISTERS 0 -#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 -#define SLJIT_LOCALS_OFFSET_BASE 0 - -#endif - -#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE) - -#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ - (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) - -#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 -#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) -#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 -#else -#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 -#endif - -#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ - (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) - -/*************************************/ -/* Debug and verbose related macros. */ -/*************************************/ - -#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) -#include -#endif - -#if (defined SLJIT_DEBUG && SLJIT_DEBUG) - -#if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP) - -/* SLJIT_HALT_PROCESS must halt the process. */ -#ifndef SLJIT_HALT_PROCESS -#include - -#define SLJIT_HALT_PROCESS() \ - abort(); -#endif /* !SLJIT_HALT_PROCESS */ - -#include - -#endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */ - -/* Feel free to redefine these two macros. */ -#ifndef SLJIT_ASSERT - -#define SLJIT_ASSERT(x) \ - do { \ - if (SLJIT_UNLIKELY(!(x))) { \ - printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ - SLJIT_HALT_PROCESS(); \ - } \ - } while (0) - -#endif /* !SLJIT_ASSERT */ - -#ifndef SLJIT_ASSERT_STOP - -#define SLJIT_ASSERT_STOP() \ - do { \ - printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ - SLJIT_HALT_PROCESS(); \ - } while (0) - -#endif /* !SLJIT_ASSERT_STOP */ - -#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ - -/* Forcing empty, but valid statements. */ -#undef SLJIT_ASSERT -#undef SLJIT_ASSERT_STOP - -#define SLJIT_ASSERT(x) \ - do { } while (0) -#define SLJIT_ASSERT_STOP() \ - do { } while (0) - -#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ - -#ifndef SLJIT_COMPILE_ASSERT - -/* Should be improved eventually. */ -#define SLJIT_COMPILE_ASSERT(x, description) \ - SLJIT_ASSERT(x) - -#endif /* !SLJIT_COMPILE_ASSERT */ - -#endif -- cgit v1.2.3