From 25101f0984e86aa30f34773eb5b2025f58086b71 Mon Sep 17 00:00:00 2001 From: Giuseppe D'Angelo Date: Sat, 23 Nov 2019 15:04:47 +0100 Subject: Update PCRE2 to 10.34 Also adjust the import script to handle new files. The RTEMS patch is not upstreamed and had to be-reapplied. Change-Id: Ie3102d56a25674b50c67edd3cce25ffe7040a215 Reviewed-by: Thiago Macieira --- src/3rdparty/pcre2/src/pcre2_internal.h | 105 ++++++++++++++++++-------------- 1 file changed, 60 insertions(+), 45 deletions(-) (limited to 'src/3rdparty/pcre2/src/pcre2_internal.h') diff --git a/src/3rdparty/pcre2/src/pcre2_internal.h b/src/3rdparty/pcre2/src/pcre2_internal.h index 814d91bddb..fe8ffe5c80 100644 --- a/src/3rdparty/pcre2/src/pcre2_internal.h +++ b/src/3rdparty/pcre2/src/pcre2_internal.h @@ -517,6 +517,7 @@ bytes in a code unit in that mode. */ #define PCRE2_HASBKPORX 0x00100000 /* contains \P, \p, or \X */ #define PCRE2_DUPCAPUSED 0x00200000 /* contains (?| */ #define PCRE2_HASBKC 0x00400000 /* contains \C */ +#define PCRE2_HASACCEPT 0x00800000 /* contains (*ACCEPT) */ #define PCRE2_MODE_MASK (PCRE2_MODE8 | PCRE2_MODE16 | PCRE2_MODE32) @@ -535,13 +536,14 @@ enum { PCRE2_MATCHEDBY_INTERPRETER, /* pcre2_match() */ #define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */ /* The maximum remaining length of subject we are prepared to search for a -req_unit match. In 8-bit mode, memchr() is used and is much faster than the -search loop that has to be used in 16-bit and 32-bit modes. */ +req_unit match from an anchored pattern. In 8-bit mode, memchr() is used and is +much faster than the search loop that has to be used in 16-bit and 32-bit +modes. */ #if PCRE2_CODE_UNIT_WIDTH == 8 -#define REQ_CU_MAX 2000 +#define REQ_CU_MAX 5000 #else -#define REQ_CU_MAX 1000 +#define REQ_CU_MAX 2000 #endif /* Offsets for the bitmap tables in the cbits set of tables. Each table @@ -881,12 +883,16 @@ a positive value. */ #define STRING_atomic0 "atomic\0" #define STRING_pla0 "pla\0" #define STRING_plb0 "plb\0" +#define STRING_napla0 "napla\0" +#define STRING_naplb0 "naplb\0" #define STRING_nla0 "nla\0" #define STRING_nlb0 "nlb\0" #define STRING_sr0 "sr\0" #define STRING_asr0 "asr\0" #define STRING_positive_lookahead0 "positive_lookahead\0" #define STRING_positive_lookbehind0 "positive_lookbehind\0" +#define STRING_non_atomic_positive_lookahead0 "non_atomic_positive_lookahead\0" +#define STRING_non_atomic_positive_lookbehind0 "non_atomic_positive_lookbehind\0" #define STRING_negative_lookahead0 "negative_lookahead\0" #define STRING_negative_lookbehind0 "negative_lookbehind\0" #define STRING_script_run0 "script_run\0" @@ -1171,12 +1177,16 @@ only. */ #define STRING_atomic0 STR_a STR_t STR_o STR_m STR_i STR_c "\0" #define STRING_pla0 STR_p STR_l STR_a "\0" #define STRING_plb0 STR_p STR_l STR_b "\0" +#define STRING_napla0 STR_n STR_a STR_p STR_l STR_a "\0" +#define STRING_naplb0 STR_n STR_a STR_p STR_l STR_b "\0" #define STRING_nla0 STR_n STR_l STR_a "\0" #define STRING_nlb0 STR_n STR_l STR_b "\0" #define STRING_sr0 STR_s STR_r "\0" #define STRING_asr0 STR_a STR_s STR_r "\0" #define STRING_positive_lookahead0 STR_p STR_o STR_s STR_i STR_t STR_i STR_v STR_e STR_UNDERSCORE STR_l STR_o STR_o STR_k STR_a STR_h STR_e STR_a STR_d "\0" #define STRING_positive_lookbehind0 STR_p STR_o STR_s STR_i STR_t STR_i STR_v STR_e STR_UNDERSCORE STR_l STR_o STR_o STR_k STR_b STR_e STR_h STR_i STR_n STR_d "\0" +#define STRING_non_atomic_positive_lookahead0 STR_n STR_o STR_n STR_UNDERSCORE STR_a STR_t STR_o STR_m STR_i STR_c STR_UNDERSCORE STR_p STR_o STR_s STR_i STR_t STR_i STR_v STR_e STR_UNDERSCORE STR_l STR_o STR_o STR_k STR_a STR_h STR_e STR_a STR_d "\0" +#define STRING_non_atomic_positive_lookbehind0 STR_n STR_o STR_n STR_UNDERSCORE STR_a STR_t STR_o STR_m STR_i STR_c STR_UNDERSCORE STR_p STR_o STR_s STR_i STR_t STR_i STR_v STR_e STR_UNDERSCORE STR_l STR_o STR_o STR_k STR_b STR_e STR_h STR_i STR_n STR_d "\0" #define STRING_negative_lookahead0 STR_n STR_e STR_g STR_a STR_t STR_i STR_v STR_e STR_UNDERSCORE STR_l STR_o STR_o STR_k STR_a STR_h STR_e STR_a STR_d "\0" #define STRING_negative_lookbehind0 STR_n STR_e STR_g STR_a STR_t STR_i STR_v STR_e STR_UNDERSCORE STR_l STR_o STR_o STR_k STR_b STR_e STR_h STR_i STR_n STR_d "\0" #define STRING_script_run0 STR_s STR_c STR_r STR_i STR_p STR_t STR_UNDERSCORE STR_r STR_u STR_n "\0" @@ -1301,7 +1311,7 @@ enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, Starting from 1 (i.e. after OP_END), the values up to OP_EOD must correspond in order to the list of escapes immediately above. Furthermore, values up to OP_DOLLM must not be changed without adjusting the table called autoposstab in -pcre2_auto_possess.c +pcre2_auto_possess.c. Whenever this list is updated, the two macro definitions that follow must be updated to match. The possessification table called "opcode_possessify" in @@ -1499,80 +1509,81 @@ enum { OP_KETRMIN, /* 123 order. They are for groups the repeat for ever. */ OP_KETRPOS, /* 124 Possessive unlimited repeat. */ - /* The assertions must come before BRA, CBRA, ONCE, and COND, and the four - asserts must remain in order. */ + /* The assertions must come before BRA, CBRA, ONCE, and COND. */ OP_REVERSE, /* 125 Move pointer back - used in lookbehind assertions */ OP_ASSERT, /* 126 Positive lookahead */ OP_ASSERT_NOT, /* 127 Negative lookahead */ OP_ASSERTBACK, /* 128 Positive lookbehind */ OP_ASSERTBACK_NOT, /* 129 Negative lookbehind */ + OP_ASSERT_NA, /* 130 Positive non-atomic lookahead */ + OP_ASSERTBACK_NA, /* 131 Positive non-atomic lookbehind */ /* ONCE, SCRIPT_RUN, BRA, BRAPOS, CBRA, CBRAPOS, and COND must come immediately after the assertions, with ONCE first, as there's a test for >= ONCE for a subpattern that isn't an assertion. The POS versions must immediately follow the non-POS versions in each case. */ - OP_ONCE, /* 130 Atomic group, contains captures */ - OP_SCRIPT_RUN, /* 131 Non-capture, but check characters' scripts */ - OP_BRA, /* 132 Start of non-capturing bracket */ - OP_BRAPOS, /* 133 Ditto, with unlimited, possessive repeat */ - OP_CBRA, /* 134 Start of capturing bracket */ - OP_CBRAPOS, /* 135 Ditto, with unlimited, possessive repeat */ - OP_COND, /* 136 Conditional group */ + OP_ONCE, /* 132 Atomic group, contains captures */ + OP_SCRIPT_RUN, /* 133 Non-capture, but check characters' scripts */ + OP_BRA, /* 134 Start of non-capturing bracket */ + OP_BRAPOS, /* 135 Ditto, with unlimited, possessive repeat */ + OP_CBRA, /* 136 Start of capturing bracket */ + OP_CBRAPOS, /* 137 Ditto, with unlimited, possessive repeat */ + OP_COND, /* 138 Conditional group */ /* These five must follow the previous five, in the same order. There's a check for >= SBRA to distinguish the two sets. */ - OP_SBRA, /* 137 Start of non-capturing bracket, check empty */ - OP_SBRAPOS, /* 138 Ditto, with unlimited, possessive repeat */ - OP_SCBRA, /* 139 Start of capturing bracket, check empty */ - OP_SCBRAPOS, /* 140 Ditto, with unlimited, possessive repeat */ - OP_SCOND, /* 141 Conditional group, check empty */ + OP_SBRA, /* 139 Start of non-capturing bracket, check empty */ + OP_SBRAPOS, /* 149 Ditto, with unlimited, possessive repeat */ + OP_SCBRA, /* 141 Start of capturing bracket, check empty */ + OP_SCBRAPOS, /* 142 Ditto, with unlimited, possessive repeat */ + OP_SCOND, /* 143 Conditional group, check empty */ /* The next two pairs must (respectively) be kept together. */ - OP_CREF, /* 142 Used to hold a capture number as condition */ - OP_DNCREF, /* 143 Used to point to duplicate names as a condition */ - OP_RREF, /* 144 Used to hold a recursion number as condition */ - OP_DNRREF, /* 145 Used to point to duplicate names as a condition */ - OP_FALSE, /* 146 Always false (used by DEFINE and VERSION) */ - OP_TRUE, /* 147 Always true (used by VERSION) */ + OP_CREF, /* 144 Used to hold a capture number as condition */ + OP_DNCREF, /* 145 Used to point to duplicate names as a condition */ + OP_RREF, /* 146 Used to hold a recursion number as condition */ + OP_DNRREF, /* 147 Used to point to duplicate names as a condition */ + OP_FALSE, /* 148 Always false (used by DEFINE and VERSION) */ + OP_TRUE, /* 149 Always true (used by VERSION) */ - OP_BRAZERO, /* 148 These two must remain together and in this */ - OP_BRAMINZERO, /* 149 order. */ - OP_BRAPOSZERO, /* 150 */ + OP_BRAZERO, /* 150 These two must remain together and in this */ + OP_BRAMINZERO, /* 151 order. */ + OP_BRAPOSZERO, /* 152 */ /* These are backtracking control verbs */ - OP_MARK, /* 151 always has an argument */ - OP_PRUNE, /* 152 */ - OP_PRUNE_ARG, /* 153 same, but with argument */ - OP_SKIP, /* 154 */ - OP_SKIP_ARG, /* 155 same, but with argument */ - OP_THEN, /* 156 */ - OP_THEN_ARG, /* 157 same, but with argument */ - OP_COMMIT, /* 158 */ - OP_COMMIT_ARG, /* 159 same, but with argument */ + OP_MARK, /* 153 always has an argument */ + OP_PRUNE, /* 154 */ + OP_PRUNE_ARG, /* 155 same, but with argument */ + OP_SKIP, /* 156 */ + OP_SKIP_ARG, /* 157 same, but with argument */ + OP_THEN, /* 158 */ + OP_THEN_ARG, /* 159 same, but with argument */ + OP_COMMIT, /* 160 */ + OP_COMMIT_ARG, /* 161 same, but with argument */ /* These are forced failure and success verbs. FAIL and ACCEPT do accept an argument, but these cases can be compiled as, for example, (*MARK:X)(*FAIL) without the need for a special opcode. */ - OP_FAIL, /* 160 */ - OP_ACCEPT, /* 161 */ - OP_ASSERT_ACCEPT, /* 162 Used inside assertions */ - OP_CLOSE, /* 163 Used before OP_ACCEPT to close open captures */ + OP_FAIL, /* 162 */ + OP_ACCEPT, /* 163 */ + OP_ASSERT_ACCEPT, /* 164 Used inside assertions */ + OP_CLOSE, /* 165 Used before OP_ACCEPT to close open captures */ /* This is used to skip a subpattern with a {0} quantifier */ - OP_SKIPZERO, /* 164 */ + OP_SKIPZERO, /* 166 */ /* This is used to identify a DEFINE group during compilation so that it can be checked for having only one branch. It is changed to OP_FALSE before compilation finishes. */ - OP_DEFINE, /* 165 */ + OP_DEFINE, /* 167 */ /* This is not an opcode, but is used to check that tables indexed by opcode are the correct length, in order to catch updating errors - there have been @@ -1585,7 +1596,7 @@ enum { /* *** NOTE NOTE NOTE *** Whenever the list above is updated, the two macro definitions that follow must also be updated to match. There are also tables called "opcode_possessify" in pcre2_compile.c and "coptable" and "poptable" in -pcre2_dfa_exec.c that must be updated. */ +pcre2_dfa_match.c that must be updated. */ /* This macro defines textual names for all the opcodes. These are used only @@ -1618,7 +1629,9 @@ some cases doesn't actually use these names at all). */ "class", "nclass", "xclass", "Ref", "Refi", "DnRef", "DnRefi", \ "Recurse", "Callout", "CalloutStr", \ "Alt", "Ket", "KetRmax", "KetRmin", "KetRpos", \ - "Reverse", "Assert", "Assert not", "AssertB", "AssertB not", \ + "Reverse", "Assert", "Assert not", \ + "Assert back", "Assert back not", \ + "Non-atomic assert", "Non-atomic assert back", \ "Once", \ "Script run", \ "Bra", "BraPos", "CBra", "CBraPos", \ @@ -1703,6 +1716,8 @@ in UTF-8 mode. The code that uses this table must know about such things. */ 1+LINK_SIZE, /* Assert not */ \ 1+LINK_SIZE, /* Assert behind */ \ 1+LINK_SIZE, /* Assert behind not */ \ + 1+LINK_SIZE, /* NA Assert */ \ + 1+LINK_SIZE, /* NA Assert behind */ \ 1+LINK_SIZE, /* ONCE */ \ 1+LINK_SIZE, /* SCRIPT_RUN */ \ 1+LINK_SIZE, /* BRA */ \ -- cgit v1.2.3