From c9c435179eddd4f252658b1106b924441168ca56 Mon Sep 17 00:00:00 2001 From: Nico Vertriest Date: Mon, 9 Sep 2013 13:22:12 +0200 Subject: Doc: split up Qdoc-manual MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit qdoc-manual.qdoc is now an overview document Each section is a separate qdoc file Title modification in minimal qdocconf qdoc file Task-number: QTBUG-31801 Change-Id: I9e50eb8c4f1f501e9c0bc768372d4393b73053ed Reviewed-by: Topi Reiniö Reviewed-by: Martin Smith Reviewed-by: Jerome Pasion --- src/tools/qdoc/doc/qdoc-manual-intro.qdoc | 181 ++++++++++++++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 src/tools/qdoc/doc/qdoc-manual-intro.qdoc (limited to 'src/tools/qdoc/doc/qdoc-manual-intro.qdoc') diff --git a/src/tools/qdoc/doc/qdoc-manual-intro.qdoc b/src/tools/qdoc/doc/qdoc-manual-intro.qdoc new file mode 100644 index 0000000000..db34e2a46c --- /dev/null +++ b/src/tools/qdoc/doc/qdoc-manual-intro.qdoc @@ -0,0 +1,181 @@ +/**************************************************************************** +** +** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/legal +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:FDL$ +** Commercial License Usage +** Licensees holding valid commercial Qt licenses may use this file in +** accordance with the commercial license agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. For licensing terms and +** conditions see http://qt.digia.com/licensing. For further information +** use the contact form at http://qt.digia.com/contact-us. +** +** GNU Free Documentation License Usage +** Alternatively, this file may be used under the terms of the GNU Free +** Documentation License version 1.3 as published by the Free Software +** Foundation and appearing in the file included in the packaging of +** this file. Please review the following information to ensure +** the GNU Free Documentation License version 1.3 requirements +** will be met: http://www.gnu.org/copyleft/fdl.html. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \page 01-qdoc-manual.html + \contentspage QDoc Manual + \previouspage QDoc Manual + \nextpage Command Index + + \title Introduction to QDoc + + QDoc is a tool used by Qt Developers to generate documentation for + software projects. It works by extracting \e {QDoc comments} from + project source files and then formatting these comments as HTML + pages or DITA XML documents. QDoc finds QDoc comments in \c + {.cpp} files and in \c {.qdoc} files. QDoc does not look for QDoc + comments in \c {.h} files. A QDoc comment always begins with an + exclamation mark (\b{!})). For example: + + \code + / *! + \class QObject + \brief The QObject class is the base class of all Qt objects. + + \ingroup objectmodel + + \reentrant + + QObject is the heart of the Qt \l{Object Model}. The + central feature in this model is a very powerful mechanism + for seamless object communication called \l{signals and + slots}. You can connect a signal to a slot with connect() + and destroy the connection with disconnect(). To avoid + never ending notification loops you can temporarily block + signals with blockSignals(). The protected functions + connectNotify() and disconnectNotify() make it possible to + track connections. + + QObjects organize themselves in \l {Object Trees & + Ownership} {object trees}. When you create a QObject with + another object as parent, the object will automatically + add itself to the parent's \c children() list. The parent + takes ownership of the object. It will automatically + delete its children in its destructor. You can look for an + object by name and optionally type using findChild() or + findChildren(). + + Every object has an objectName() and its class name can be + found via the corresponding metaObject() (see + QMetaObject::className()). You can determine whether the + object's class inherits another class in the QObject + inheritance hierarchy by using the \c inherits() function. + + .... + * / + \endcode + + From the QDoc comment above, QDoc generates the HTML page + \l {http://qt-project.org/doc/qt-5.0/qtcore/qobject.html#details} + {QObject Class Reference}. + + This manual explains how to use the QDoc commands in QDoc comments + to embed good documentation in your source files. It also explains + how to make a \l {The QDoc Configuration File} {QDoc configuration + file}, which you will pass to QDoc on the command line. + + \section1 Running QDoc + + The current name of the QDoc program is \c {qdoc}. To run qdoc + from the command line, give it the name of a configuration file: + + \quotation + \c {$ ../../bin/qdoc ./config.qdocconf} + \endquotation + + QDoc recognizes the \c {.qdocconf} suffix as a \l{The QDoc + Configuration File} {QDoc configuration file}. The configuration + file is where you tell QDoc where to find the project source + files, header files, and \c {.qdoc} files. It is also where you + tell QDoc what kind of output to generate (HTML, DITA XML,...), + and where to put the generated documentation. The configuration + file also contains other information for QDoc. + + See \l{The QDoc Configuration File} for instructions on how to + set up a QDoc configuration file. + + \section1 How QDoc works + + QDoc begins by reading the configuration file you specified on the + command line. It stores all the variables from the configuration + file for later use. One of the first variables it uses is \c + {outputformats}. This variable tells QDoc which output generators + it will run. The default value is \e {HTML}, so if you don't set + \c {outputformats} in your configuration file, QDoc will generate + HTML output. That's usually what you will want anyway, but you can + also specify \e {DITAXML} to get DITA XML output instead. + + Next, QDoc uses the values of the + \l {22-qdoc-configuration-generalvariables.html#headerdirs-variable} + {headerdirs} variable and/or the \l + {22-qdoc-configuration-generalvariables.html#headers-variable} + {headers} variable to find and parse all the header files for your + project. QDoc does \e not scan header files for QDoc comments. It + parses the header files to build a master tree of all the items + that should be documented, in other words, the items that QDoc should find + QDoc comments for. + + After parsing all the header files and building the master tree of + items to be documented, QDoc uses the value of the \l + {22-qdoc-configuration-generalvariables.html#sourcedirs-variable} + {sourcedirs} variable and/or the value of the \l + {22-qdoc-configuration-generalvariables.html#sources-variable} + {sources} variable to find and parse all the \c {.cpp} and \c + {.qdoc} files for your project. These are the files QDoc scans for + \e {QDoc comments}. Remember that a QDoc comment begins with + an exclamation mark: \b {/*!} . + + For each QDoc comment it finds, it searches the master tree for + the item where the documentation belongs. Then it interprets the + qdoc commands in the comment and stores the interpreted commands + and the comment text in the tree node for the item. + + Finally, QDoc traverses the master tree. For each node, if the + node has stored documentation, QDoc calls the output generator + specified by the \c {outputformats} variable to format and write + the documentation in the directory specified in the configuration + file in the \l + {22-qdoc-configuration-generalvariables.html#outputdir-variable} + {outputdir} variable. + + \section1 Command Types + + QDoc interprets three types of commands: + + \list + \li \l {Topic Commands} + \li \l {Context Commands} + \li \l {Markup Commands} + \endlist + + Topic commands identify the element you are documenting, for example + a C++ class, function, type, or an extra page of text + that doesn't map to an underlying C++ element. + + Context commands tell QDoc how the element being documented + relates to other documented elements, for example, next and previous page + links, inclusion in page groups, or library modules. Context + commands can also provide information about the documented element + that QDoc can't get from the source files, for example, whether the + element is thread-safe, whether it is an overloaded or reimplemented function, + or whether it has been deprecated. + + Markup commands tell QDoc how text and image elements in the + document should be rendered, or about the document's outline + structure. +*/ + -- cgit v1.2.3