From c9c435179eddd4f252658b1106b924441168ca56 Mon Sep 17 00:00:00 2001 From: Nico Vertriest Date: Mon, 9 Sep 2013 13:22:12 +0200 Subject: Doc: split up Qdoc-manual MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit qdoc-manual.qdoc is now an overview document Each section is a separate qdoc file Title modification in minimal qdocconf qdoc file Task-number: QTBUG-31801 Change-Id: I9e50eb8c4f1f501e9c0bc768372d4393b73053ed Reviewed-by: Topi Reiniö Reviewed-by: Martin Smith Reviewed-by: Jerome Pasion --- src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc | 1603 ++++++++++++++++++++++++++ 1 file changed, 1603 insertions(+) create mode 100644 src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc (limited to 'src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc') diff --git a/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc b/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc new file mode 100644 index 0000000000..74f5ad0c7b --- /dev/null +++ b/src/tools/qdoc/doc/qdoc-manual-qdocconf.qdoc @@ -0,0 +1,1603 @@ +/**************************************************************************** +** +** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/legal +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:FDL$ +** Commercial License Usage +** Licensees holding valid commercial Qt licenses may use this file in +** accordance with the commercial license agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. For licensing terms and +** conditions see http://qt.digia.com/licensing. For further information +** use the contact form at http://qt.digia.com/contact-us. +** +** GNU Free Documentation License Usage +** Alternatively, this file may be used under the terms of the GNU Free +** Documentation License version 1.3 as published by the Free Software +** Foundation and appearing in the file included in the packaging of +** this file. Please review the following information to ensure +** the GNU Free Documentation License version 1.3 requirements +** will be met: http://www.gnu.org/copyleft/fdl.html. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \page 21-0-qdoc-configuration.html + \previouspage Creating DITA Maps + \contentspage QDoc Manual + \nextpage Generic Configuration Variables + + \title The QDoc Configuration File + + Before running QDoc, you must create a QDoc configuration file to + tell QDoc where to find the source files that contain the QDoc + comments. The pathname to your configuration file is passed to + QDoc on the command line: + + \quotation + \c {/current/dir$ ../../bin/qdoc ./config.qdocconf} + \endquotation + + \section1 General Description + + The configuration file is a list of entries of the form \e + {"variable = value"}. Using the configuration variables, you can + define where QDoc should find the various source files, images and + examples, where to put generated documentation etc. The + configuration file can also contain directives like \c + include. For an example, see \l {minimal-qdocconf}{a minimal qdocconf file}. + + You can also use configuration variables to get QDoc to support + \l{Supporting Derived Projects} {derived projects}, i.e QDoc can + generate links in your project's documentation to elements in the + Qt online documentation. See the \l {Supporting Derived projects} + section. + + The value of a configuration variable can be set using either '=' + or '+='. The difference is that '=' overrides the previous value, + while '+=' adds a new value to the current one. + + Some configuration variables accept a list of strings as their + value, for example: + \l {22-qdoc-configuration-generalvariables.html#sourcedirs-variable} + {\c{sourcedirs}}, while others accept only a single string. Double + quotes around a value string are optional, but including them allows + you to use special characters like '=' and ' \" ' within the value + string, for example: + + \code + HTML.postheader = "Home" + \endcode + + If an entry spans many lines, use a backslash at the end of every + line but the last: + + \code + sourcedirs = kernel \ + tools \ + widgets + \endcode + + \section1 Configuration Variables + + \section1 Variable List + + \list + \li \l {22-qdoc-configuration-generalvariables.html#alias-variable} {alias} + \li \l {23-qdoc-configuration-cppvariables.html#Cpp.ignoredirectives-variable} {Cpp.ignoredirectives} + \li \l {23-qdoc-configuration-cppvariables.html#Cpp.ignoretokens-variable} {Cpp.ignoretokens} + \li \l {22-qdoc-configuration-generalvariables.html#defines-variable} {defines} + \li \l {22-qdoc-configuration-generalvariables.html#edition-variable} {edition} + \li \l {22-qdoc-configuration-generalvariables.html#exampledirs-variable} {exampledirs} + \li \l {22-qdoc-configuration-generalvariables.html#examples-variable} {examples} + \li \l {22-qdoc-configuration-generalvariables.html#examples.fileextensions-variable} {examples.fileextensions} + \li \l {22-qdoc-configuration-generalvariables.html#excludedirs-variable} {excludedirs} + \li \l {22-qdoc-configuration-generalvariables.html#excludefiles-variable} {excludefiles} + \li \l {22-qdoc-configuration-generalvariables.html#extraimages-variable} {extraimages} + \li \l {22-qdoc-configuration-generalvariables.html#falsehoods-variable} {falsehoods} + \li \l {22-qdoc-configuration-generalvariables.html#headerdirs-variable} {headerdirs} + \li \l {22-qdoc-configuration-generalvariables.html#headers-variable} {headers} + \li \l {22-qdoc-configuration-generalvariables.html#headers.fileextensions-variable} {headers.fileextensions} + \li \l {24-qdoc-configuration-htmlvariables.html#HTML.footer-variable} {HTML.footer} + \li \l {24-qdoc-configuration-htmlvariables.html#HTML.postheader-variable} {HTML.postheader} + \li \l {24-qdoc-configuration-htmlvariables.html#HTML.style-variable} {HTML.style} + \li \l {22-qdoc-configuration-generalvariables.html#imagedirs-variable} {imagedirs} + \li \l {22-qdoc-configuration-generalvariables.html#images-variable} {images} + \li \l {22-qdoc-configuration-generalvariables.html#images.fileextensions-variable} {images.fileextensions} + \li \l {22-qdoc-configuration-generalvariables.html#language-variable} {language} + \li \l {22-qdoc-configuration-generalvariables.html#macro-variable} {macro} + \li \l {22-qdoc-configuration-generalvariables.html#manifestmeta-variable} {manifestmeta} + \li \l {22-qdoc-configuration-generalvariables.html#outputdir-variable} {outputdir} + \li \l {22-qdoc-configuration-generalvariables.html#outputformats-variable} {outputformats} + \li \l {22-qdoc-configuration-generalvariables.html#sourcedirs-variable} {sourcedirs} + \li \l {22-qdoc-configuration-generalvariables.html#sources-variable} {sources} + \li \l {22-qdoc-configuration-generalvariables.html#sources.fileextensions-variable} {sources.fileextensions} + \li \l {22-qdoc-configuration-generalvariables.html#spurious-variable} {spurious} + \li \l {22-qdoc-configuration-generalvariables.html#tabsize-variable} {tabsize} + \li \l {22-qdoc-configuration-generalvariables.html#version-variable} {version} + \li \l {22-qdoc-configuration-generalvariables.html#versionsym-variable} {versionsym} + \endlist + + \section1 Categories + + \list + \li \l {Generic Configuration Variables} + \li \l {C++ Specific Configuration Variables} + \li \l {HTML Specific Configuration Variables} + \endlist + + \section1 Configuration File Examples + + \list + \li A minimum configuration file: \l minimum.qdocconf + \li The Qt configuration file: \l qtgui.qdocconf + \endlist +*/ + + +/*! + \page 22-qdoc-configuration-generalvariables.html + \previouspage The QDoc Configuration File + \contentspage QDoc Manual + \nextpage Creating Help Project Files + + \title Generic Configuration Variables + + With the general QDoc configuration variables, you can define + where QDoc will find the various source files it needs to generate + the documentation, as well as the directory to put the generated + documentation. You can also do some minor manipulation of QDoc + itself, controlling its output and processing behavior. + + \target alias-variable + \section1 alias + + The \c alias variable renames a QDoc command. + + The general syntax is \tt {alias.\e{original-command-name} = \e + temporary-command-name}. + + \code + alias.e = i + \endcode + + This renames the built-in command \\e (italics) to be \\i. The \c + alias variable is often used for compatibility reasons. + + See also \l {macro-variable} {macro}. + + \target codeindent-variable + \section1 codeindent + + The \c codeindent variable specifies the level of indentation that + QDoc uses when writing code snippets. + + QDoc originally used a hard-coded value of four spaces for code + indentation to ensure that code snippets could be easily + distinguished from surrounding text. Since we can use \l{HTML + Specific Configuration Variables#HTML.stylesheets} {stylesheets} + to adjust the appearance of certain types of HTML elements, this + level of indentation is not always required. + + \target defines-variable + \section1 defines + + The \c defines variable specifies the C++ preprocessor symbols + that QDoc will recognize and respond to. + + When a preprocessor symbol is specified using the \c defines + variable, you can also use the \l {if-command} {\\if} command to + enclose documentation that only will be included if the + preprocessor symbol is defined. + + The values of the variable are regular expressions (see QRegExp + for details). By default, no symbol is defined, meaning that code + protected with #ifdef...#endif will be ignored. + + \code + defines = Q_QDOC \ + QT_.*_SUPPORT \ + QT_.*_LIB \ + QT_COMPAT \ + QT3_SUPPORT \ + Q_WS_.* \ + Q_OS_.* \ + Q_BYTE_ORDER \ + __cplusplus + \endcode + + This ensures that QDoc will process the code that requires these + symbols to be defined. For example: + + \code + #ifdef Q_WS_WIN + HDC getDC() const; + void releaseDC(HDC) const; + #endif + \endcode + + Since the Q_WS_.* regular expression (specified using the \c + defines variable) matches Q_WS_WIN, QDoc will process the code + within #ifdef and #endif in our example. + + You can also define preprocessor symbols manually on the command + line using the -D option. For example: + + \code + currentdirectory$ qdoc -Dconsoleedition qtgui.qdocconf + \endcode + + In this case the -D option ensures that the \c consoleedition + preprocessor symbol is defined when QDoc processes the source + files defined in the qtgui.qdocconf file. + + See also \l {falsehoods-variable} {falsehoods} and \l {if-command} {\\if}. + + \target edition-variable + \section1 edition + + The \c edition variable specifies which modules are included in + each edition of a package, and provides QDoc with information to + provide class lists for each edition. + + This feature is mostly used when providing documentation for Qt + packages. + + The \c edition variable is always used with a particular edition + name to define the modules for that edition: + + \code + edition.Console = QtCore QtNetwork QtSql QtXml + edition.Desktop = QtCore QtGui QtNetwork QtOpenGL QtSql QtXml \ + QtDesigner QtAssistant Qt3Support QAxContainer \ + QAxServer + edition.DesktopLight = QtCore QtGui Qt3SupportLight + \endcode + + In the above examples, the \c Console edition only includes the + contents of four modules. Only the classes from these modules will + be used when the \l{Miscellaneous#generatelist-command} + {generatelist} command is used to generate a list of classes for + this edition: + + \code + \generatelist{classesbyedition Console} + \endcode + + \target exampledirs-variable + \section1 exampledirs + + The \c exampledirs variable specifies the directories containing + the source code of the example files. + + The \l {examples-variable} {examples} and \l + {exampledirs-variable} {exampledirs} variables are used by the \l + {quotefromfile-command} {\\quotefromfile}, \l {quotefile-command} + {\\quotefile} and \l {example-command} {\\example} commands. If + both the \l {examples-variable} {examples} and \l + {exampledirs-variable} {exampledirs} variables are defined, QDoc + will search in both, first in \l {examples-variable} {examples} + then in \l {exampledirs-variable} {exampledirs}. + + QDoc will search through the directories in the specified order, + and accept the first matching file it finds. It will only search + in the specified directories, \e not in subdirectories. + + \code + exampledirs = $QTDIR/doc/src \ + $QTDIR/examples \ + $QTDIR \ + $QTDIR/qmake/examples + + examples = $QTDIR/examples/widgets/analogclock/analogclock.cpp + \endcode + + When processing + + \code + \quotefromfile widgets/calculator/calculator.cpp + \endcode + + QDoc will see if there is a file called \c calculator.cpp + listed as a value in the \l {examples-variable} {\c examples} variable. If + there isn't, it will search in the \c exampledirs variable, and + first see if there exists a file called + + \code + $QTDIR/doc/src/widgets/calculator/calculator.cpp + \endcode + + If it doesn't, QDoc will continue looking for a file called + + \code + $QTDIR/examples/widgets/calculator/calculator.cpp + \endcode + + and so forth. + + See also \l {examples-variable}{examples}. + + \target examples-variable + \section1 examples + + The \c examples variable allows you to specify individual example + files in addition to those located in the directories specified by + the \l {exampledirs-variable} {\c exampledirs} variable. + + The \c examples and \l {exampledirs-variable} {\c exampledirs} + variables are used by the \l {quotefromfile-command} + {\\quotefromfile}, \l {quotefile-command} {\\quotefile} and \l + {example-command} {\\example} commands. If both the \c examples and \l + {exampledirs-variable} {\c exampledirs} variables are defined, + QDoc will search in both, first in \c examples then in \l + {exampledirs-variable} {\c exampledirs}. + + QDoc will search through the values listed for the \c examples + variable, in the specified order, and accept the first one it + finds. + + For an extensive example, see the \l {exampledirs-variable} {\c + exampledirs} command. But note that if you know the file is listed + in the \c examples variable, you don't need to specify its path: + + \code + \quotefromfile calculator.cpp + \endcode + + See also \l {exampledirs-variable} {exampledirs}. + + \target examples.fileextensions-variable + \section1 examples.fileextensions + + The \c examples.fileextensions variable specifies the file + extensions that qdoc will look for when collecting example files + for display in the documentation. + + The default extensions are *.cpp, *.h, *.js, *.xq, *.svg, *.xml + and *.ui. + + The extensions are given as standard wildcard expressions. You + can add a file extension to the filter using '+='. For example: + + \code + examples.fileextensions += *.qrc + \endcode + + See also \l{headers.fileextensions}. + + \target excludedirs-variable + \section1 excludedirs + + The \c excludedirs variable is for listing directories that should \e{not} + be processed by qdoc, even if the same directories are included by the + \l {sourcedirs-variable} {sourcedirs} or \l {headerdirs-variable} {headerdirs} + variables. + + For example: + + \code + sourcedirs = src/corelib + excludedirs = src/corelib/tmp + \endcode + + When executed, QDoc will exclude the listed directories from + further consideration. Files in these directories will not be + read by qdoc. + + See also \l {excludefiles-variable} {excludefiles}. + + \target excludefiles-variable + \section1 excludefiles + + The \c excludefiles variable allows you to specify individual files + that should \e{not} be processed by qdoc. + + \code + excludefiles += $QT_CORE_SOURCES/../../src/widgets/kernel/qwidget.h \ + $QT_CORE_SOURCES/../../src/widgets/kernel/qwidget.cpp + \endcode + + If you include the above in your qdocconf file for qtbase, there + will be no qwidget.html generated for html and no qwidget.xml + generated for DITA XML. + + See also \l {excludedirs-variable} {excludedirs}. + + \target extraimages-variable + \section1 extraimages + + The \c extraimages variable tells QDoc to incorporate specific + images in the generated documentation. + + QDoc will not recognize images used within HTML (or any other + markup language). If we want the images to be copied from the + directories specified by \l {imagedirs} {\c imagedirs} (the images + in question must be located in these directories) to the output + directory, we must specify the images using the \c extraimages + variable. + + The general syntax is \tt {extraimages.\e{format} = \e image}. The + file extension is optional. + + For example, in \l qtgui.qdocconf we use a couple of images within + the HTML.postheader variable which value is pure HTML. For that + reason, these images are specified using the \c extraimages + variable: + + \code + extraimages.HTML = qt-logo + \endcode + + See also \l images and \l imagedirs. + + \target falsehoods-variable + \section1 falsehoods + + The \c falsehoods variable defines the truth value of specified + preprocessor symbols as false. + + If this variable is not set for a preprocessor symbol, QDoc + assumes its truth value is true. The exception is '0', which value + always is false. + + QDoc will recognize, and is able to evaluate, the following + preprocessor syntax: + + \code + #ifdef NOTYET + ... + #endif + + #if defined (NOTYET) + ... + #end if + \endcode + + However, faced with unknown syntax like + + \code + #if NOTYET + ... + #endif + \endcode + + QDoc will evaluate it as true by default, \e unless the + preprocessor symbol is specified within the \c falsehoods variable + entry: + + \code + falsehoods = NOTYET + \endcode + + See also \l defines. + + \target generateindex-variable + \section1 generateindex + + The \c generateindex variable contains a boolean value that + specifies whether to generate an index file when HTML + documentation is generated. + + By default, an index file is always generated with HTML + documentation, so this variable is typically only used when + disabling this feature (by setting the value to \c false) or when + enabling index generation for the WebXML output (by setting the + value to \c true). + + \target headerdirs-variable + \section1 headerdirs + + The \c headerdirs variable specifies the directories containing + the header files associated with the \c .cpp source files used in + the documentation. + + \code + headerdirs = $QTDIR/src \ + $QTDIR/extensions/activeqt \ + $QTDIR/extensions/motif \ + $QTDIR/tools/designer/src/lib/extension \ + $QTDIR/tools/designer/src/lib/sdk \ + $QTDIR/tools/designer/src/lib/uilib + \endcode + + When executed, the first thing QDoc will do is to read through the + headers specified in the \l {headers} {\c headers} variable, and + the ones located in the directories specified in the \c headerdir + variable (including all subdirectories), building an internal + structure of the classes and their functions. + + Then it will read through the sources specified in the \l + {sources-variable} {\c sources}, and the ones located in the + directories specified in the \l {sourcedirs-variable} {\c + sourcedirs} varible (including all subdirectories), merging the + documentation with the structure it retrieved from the header + files. + + If both the \c headers and \c headerdirs variables are defined, + QDoc will read through both, first \l {headers} {\c headers} then + \c headerdirs. + + In the specified directories, QDoc will only read the files with + the \c fileextensions specified in the \l {headers.fileextensions} + {\c headers.fileextensions} variable. The default extensions are + *.ch, *.h, *.h++, *.hh, *.hpp, and *.hxx". The files specified by + \l {headers} {\c headers} will be read without taking into account + their fileextensions. + + See also \l headers and \l headers.fileextensions. + + \target headers-variable + \section1 headers + + The \c headers variable allows you to specify individual header + files in addition to those located in the directories specified by + the \l {headerdirs} {\c headerdirs} variable. + + \code + headers = $QTDIR/src/gui/widgets/qlineedit.h \ + $QTDIR/src/gui/widgets/qpushbutton.h + \endcode + + When processing the \c headers variable, QDoc behaves in the same + way as it does when processing the \l {headerdirs} {\c headerdirs} + variable. For more information, see the \l {headerdirs} {\c + headerdirs} variable. + + See also \l headerdirs. + + \target headers.fileextensions-variable + \section1 headers.fileextensions + + The \c headers.fileextensions variable specify the extension used + by the headers. + + When processing the header files specified in the \l {headerdirs} + {\c headerdirs} variable, QDoc will only read the files with the + fileextensions specified in the \c headers.fileextensions + variable. In this way QDoc avoids spending time reading irrelevant + files. + + The default extensions are *.ch, *.h, *.h++, *.hh, *.hpp, and + *.hxx. + + The extensions are given as standard wildcard expressions. You + can add a file extension to the filter using '+='. For example: + + \code + header.fileextensions += *.H + \endcode + + \warning The above assignment may not work as described. + + See also \l headerdirs. + + \target imagedirs-variable + \section1 imagedirs + + The \c imagedirs variable specifies the directories containing the + images used in the documentation. + + The \l {images} {\c images} and \c imagedirs variables are used by + the \l {image-command} {\\image} and \l {inlineimage-command} + {\\inlineimage} commands. If both the \l {images} {\c images} and + \c imagedirs variables are defined, QDoc will search in both. First + in \l {images} {\c images}, then in \c imagedirs. + + QDoc will search through the directories in the specified order, + and accept the first matching file it finds. It will only search + in the specified directories, \e not in subdirectories. + + \code + imagedirs = $QTDIR/doc/src/images \ + $QTDIR/examples + + images = $QTDIR/doc/src/images/calculator-example.png + \endcode + + When processing + + \code + \image calculator-example.png + \endcode + + QDoc will then see if there is a file called + calculator-example.png listed as a value in the \c images + variable. If there isn't, it will search in the \c imagedirs + variable for: + + \code + $QTDIR/doc/src/images/calculator-example.png + \endcode + + If the file doesn't exist, QDoc will look for a file called + + \code + $QTDIR/examples/calculator-example.png + \endcode + + You can filter the images in an image directory using the \l + {images.fileextensions} {\c images.fileextensions} variable. The + general idea behind the \l {images.fileextensions} {\c images.fileextensions} + variable is to enable different image format for different output format. + + \warning The \l {images.fileextensions} {\c images.fileextensions} + variable's functionality is preliminary since QDoc at this point + only supports HTML. + + See also \l images and \l images.fileextensions. + + \target images-variable + \section1 images + + The \c images variable allows you to specify individual image + files in addition to those located in the directories specified by + the \l {imagedirs} {\c imagedirs} variable. + + \code + images = $QTDIR/doc/src/images/calculator-example.png + \endcode + + When processing the \c images variable, QDoc behaves in the same + way as it does when processing the \l {imagedirs} {\c imagedirs} + variable. For more information, see the \l {imagedirs} {\c + imagedirs} variable. + + See also \l imagedirs and \l images.fileextensions. + + \target images.fileextensions-variable + \section1 images.fileextensions + + The images.fileextensions variable filters the files within an + image directory. + + The variable's values (the extensions) are given as standard + wildcard expressions. The general syntax is: \tt + {images.fileextensions.\e{format} = *.\e{extension}}. + + The idea is to enable different image format for different output + format. + + \code + images.fileextensions.HTML = *.png + images.fileextensions.LOUT = *.eps + \endcode + + Then, when processing the \l {image-command} {\\image} and \l + {inlineimage-command} {\\inlineimage} commands, QDoc will only + search for files with extensions specified in the variable + containing the list of output formats. + + \warning This is only a preliminary functionality since QDoc at this + point only supports HTML. + + The default extensions for HTML are *.png, *.jpg, *.jpeg, and + *.gif. + + You can add a file extension to the filter using '+='. For + example: + + \code + images.fileextensions.HTML += *.eps + \endcode + + See also \l imagedirs and \l images. + + \target language-variable + \section1 language + + The \c language variable specifies the language of the source code + that is used in the documentation. + + Currently, C++ is the only language that QDoc understands. It is + also the default language, and doesn't really need to be + specified. However, a possible example of a language variable + statement: + + \code + language = Cpp + \endcode + + This identifies C++ as the language of the Qt source code. + + \target macro-variable + \section1 macro + + The \c macro variable is used to create your own simple QDoc + commands. The syntax is \tt {macro.\e{command} = \e{definition}}, + where the definition is written using QDoc syntax. + + A macro variable can be restricted for use in one type of output + generation. By appending \c {.HTML} to the macro name, for + example, the macro is only used when generating HTML output. By + appending \c {.DITAXML} to the macro name, the macro is only used + when generating DITA XML. + + \code + macro.gui = "\\b" + macro.raisedaster.HTML = "*" + \endcode + + The first macro defines the \\gui command to render its argument + using a bold font. The second macro defines the \\raisedaster + command to render a superscript asterisk, but only when generating + HTML. + + See also \l {alias-variable} {alias}. + + \target manifestmeta-variable + \section1 manifestmeta + + The \c manifestmeta variable specifies additional meta-content + for the example manifest files generated by QDoc. + + See the \l{Manifest Meta Content} section for more information. + + \target naturallanguage-variable + \section1 naturallanguage + + The \c naturallanguage variable specifies the natural language + used for the documentation generated by qdoc. + + \code + naturallanguage = zh-Hans + \endcode + + By default, the natural language is \c en for compatibility with + legacy documentation. + + qdoc will add the natural language information to the HTML it + generates, using the \c lang and \c xml:lang attributes. + + See also \l {sourceencoding-variable} {sourceencoding}, + \l {outputencoding-variable} {outputencoding}, + \l{http://www.w3.org/TR/xhtml1/#C_7} + {C.7. The lang and xml:lang Attributes} and + \l{http://www.w3.org/TR/i18n-html-tech-lang/#ri20040429.113217290} + {Best Practice 13: Using Hans and Hant codes}. + + \target outputdir-variable + \section1 outputdir + + The \c outputdir variable specifies the directory where QDoc will + put the generated documentation. + + \code + outputdir = $QTDIR/doc/html + \endcode + + locates the generated Qt reference documentation in + $QTDIR/doc/html. For example, the documentation of the QWidget + class is located in + + \code + $QTDIR/doc/html/qwidget.html + \endcode + + The associated images will be put in an \c images subdirectory. + + \warning When running QDoc multiple times using the same output + directory, all files from the previous run will be lost. + + \target outputencoding-variable + \section1 outputencoding + + The \c outputencoding variable specifies the encoding used for the + documentation generated by qdoc. + + \code + outputencoding = UTF-8 + \endcode + + By default, the output encoding is \c ISO-8859-1 (Latin1) for + compatibility with legacy documentation. When generating + documentation for some languages, particularly non-European + languages, this is not sufficient and an encoding such as UTF-8 is + required. + + qdoc will encode HTML using this encoding and generate the correct + declarations to indicate to browsers which encoding is being + used. The \l naturallanguage configuration variable should also be + specified to provide browsers with a complete set of character + encoding and language information. + + See also \l outputencoding and \l naturallanguage. + + \target outputformats-variable + \section1 outputformats + + The \c outputformats variable specifies the format of + the generated documentation. + + Currently, QDoc only supports the HTML format. It is also + the default format, and doesn't need to be specified. + + \target outputprefixes + \section1 outputprefixes + + The \c outputprefixes variable specifies a mapping between types of files + and the prefixes to prepend to the HTML file names in the generated + documentation. + + \code + outputprefixes = QML + outputprefixes.QML = uicomponents- + \endcode + + By default, files containing the API documentation for QML types + are prefixed with "qml-". In the above example, the + prefix \c "uicomponents" is used instead. + + \target qhp-variable + \section1 qhp + + The \c qhp variable is used to define the information to be + written out to Qt Help Project (\c{qhp}) files. + + See the \l{Creating Help Project Files} chapter for information + about this process. + + \target sourcedirs-variable + \section1 sourcedirs + + The \c sourcedirs variable specifies the directories containing + the \c .cpp or \c .qdoc files used in the documentation. + + \code + sourcedirs += .. \ + ../../../examples/gui/doc/src + \endcode + + When executed, the first thing QDoc will do is to read through the + headers specified in the \l {header-command} {\c header} variable, + and the ones located in the directories specified in the \c + headerdir variable (including all subdirectories), building an + internal structure of the classes and their functions. + + Then it will read through the sources specified in the \l + {sources} {\c sources}, and the ones located in the directories + specified in the \l {sourcedirs} {\c sourcedirs} variable + (including all subdirectories), merging the documentation with the + structure it retrieved from the header files. + + If both the \c sources and \c sourcedirs variables are defined, + QDoc will read through both, first \l {sources} {\c sources} then + \c sourcedirs. + + In the specified directories, QDoc will only read the files with + the \c fileextensions specified in the \l {sources.fileextensions} + {\c sources.fileextensions} variable. The default extensions are + *.c++, *.cc, *.cpp and *.cxx. The files specified by \l {sources} + {\c sources} will be read independent of their fileextensions. + + See also \l {sources-variable} {sources} and + \l {sources.fileextensions-variable} {sources.fileextensions}. + + \target sourceencoding-variable + \section1 sourceencoding + + The \c sourceencoding variable specifies the encoding used for the + source code and documentation. + + \code + sourceencoding = UTF-8 + \endcode + + By default, the source encoding is \c ISO-8859-1 (Latin1) for + compatibility with legacy documentation. For some languages, + particularly non-European languages, this is not sufficient and an + encoding such as UTF-8 is required. + + Although qdoc will use the encoding to read source and + documentation files, limitations of C++ compilers may prevent you + from using non-ASCII characters in source code comments. In cases + like these, it is possible to write API documentation completely + in documentation files. + + See also \l {naturallanguage-variable} {naturallanguage} and + \l {outputencoding-variable} {outputencoding}. + + \target sources-variable + \section1 sources + + The \c sources variable allows you to specify individual source + files in addition to those located in the directories specified by + the \l {sourcedirs-variable} {sourcedirs} variable. + + \code + sources = $QTDIR/src/gui/widgets/qlineedit.cpp \ + $QTDIR/src/gui/widgets/qpushbutton.cpp + \endcode + + When processing the \c sources variable, QDoc behaves in the same + way as it does when processing the \l {sourcedirs-variable} + {sourcedirs} variable. For more information, see the \l + {sourcedirs-variable} {sourcedirs} variable. + + See also \l {sourcedirs-variable} {sourcedirs}. + + \target sources.fileextensions-variable + \section1 sources.fileextensions + + The \c sources.fileextensions variable filters the files within a + source directory. + + When processing the source files specified in the \l {sourcedirs} + {\c sourcedirs} variable, QDoc will only read the files with the + fileextensions specified in the \c sources.fileextensions + variable. In this way QDoc avoid spending time reading irrelevant + files. + + The default extensions are *.c++, *.cc, *.cpp and *.cxx. + + The extensions are given as standard wildcard expressions. You + can add a file extension to the filter using '+='. For example: + + \code + sources.fileextensions += *.CC + \endcode + + \warning The above assignment may not work as described. + + See also \l {sourcedirs-variable} {sourcedirs} and \l + (sources-variable} {sources}. + + + \target spurious-variable + \section1 spurious + + The \c spurious variable excludes specified QDoc warnings from the + output. The warnings are specified using standard wildcard + expressions. + + \code + spurious = "Cannot find .*" \ + "Missing .*" + \endcode + + makes sure that warnings matching either of these expressions, + will not be part of the output when running QDoc. For example + would the following warning be omitted from the output: + + \code + qt-4.0/src/opengl/qgl_mac.cpp:156: Missing parameter name + \endcode + + \target syntaxhighlighting + \section1 syntaxhighlighting + + The \c syntaxhighlighting variable specifies whether QDoc should + perform syntax highlighting on source code quoted in the + documentation it generates. + + \code + syntaxhighlighting = true + \endcode + + will enable syntax highlighting for all supported programming + languages. + + \target tabsize-variable + \section1 tabsize + + The \c tabsize variable defines the size of a tab character. + + \code + tabsize = 4 + \endcode + + will give the tab character the size of 4 spaces. The default + value of the variable is 8, and doesn't need to be specified. + + \target tagfile-variable + \section1 tagfile + + The \c tagfile variable specifies the Doxygen tag file to be + written when HTML is generated. + + \target version-variable + \section1 version + + The \c version variable specifies the version number of the + documented software. + + \code + version = 4.0.1 + \endcode + + When a version number is specified (using the \tt{\l version} or + \tt {\l versionsym} variables in a \c .qdocconf file), it is + accessible through the corresponding \\version command for use in + the documentation. + + \warning The \\version command's functionality is not fully + implemented; currently it only works within raw HTML code. + + See also \l versionsym. + + \target versionsym-variable + \section1 versionsym + + The \c versionsym variable specifies a C++ preprocessor symbol + that defines the version number of the documented software. + + \code + versionsym = QT_VERSION_STR + \endcode + + QT_VERSION_STR is defined in qglobal.h as follows + + \code + #define QT_VERSION_STR "4.0.1" + \endcode + + When a version number is specified (using the \tt{\l version} or + \tt {\l versionsym} variables in a \c .qdocconf file), it is + accessible through the corresponding \\version command for use in + the documentation. + + \warning The \\version command's functionality is not fully + implemented. Currently, it only works within raw HTML code. + + See also \l {version} {\\version}. +*/ + +/*! + \page 22-creating-help-project-files.html + \previouspage Generic Configuration Variables + \contentspage QDoc Manual + \nextpage C++ Specific Configuration Variables + + \title Creating Help Project Files + + \section1 Overview + + Starting with Qt 4.4, Qt Assistant uses a different system for managing + Qt documentation that requires QDoc to generate inventories of files in a + format that is similar to the old style DCF format, but with additional + features. + + Instead of hard-coding information about the documentation sets for Qt, + QDoc allows configuration variables to be used to specify which pages are + to be used in each documentation set it generates. These are specified as + subvariables of the \c qch variable with each set declared using a unique + identifier as a subvariable. + + For example, the configuration file for the Qt documentation defines a + \c Qt documentation set by specifying information about the set as + subvariables with the \c{qhp.Qt} prefix: + + \code + qhp.Qt.file = qt.qhp + qhp.Qt.namespace = com.trolltech.qt.440 + qhp.Qt.virtualFolder = qdoc + qhp.Qt.indexTitle = Qt Reference Documentation + qhp.Qt.indexRoot = + qhp.Qt.extraFiles = classic.css images/qt-logo.png + qhp.Qt.filterAttributes = qt 4.4.0 qtrefdoc + qhp.Qt.customFilters.Qt.name = Qt 4.4.0 + qhp.Qt.customFilters.Qt.filterAttributes = qt 4.4.0 + qhp.Qt.subprojects = classes overviews examples + qhp.Qt.subprojects.classes.title = Classes + qhp.Qt.subprojects.classes.indexTitle = Qt's Classes + qhp.Qt.subprojects.classes.selectors = class + qhp.Qt.subprojects.overviews.title = Overviews + qhp.Qt.subprojects.overviews.indexTitle = All Overviews and HOWTOs + qhp.Qt.subprojects.overviews.selectors = fake:page,group,module + qhp.Qt.subprojects.examples.title = Tutorials and Examples + qhp.Qt.subprojects.examples.indexTitle = Qt Examples + qhp.Qt.subprojects.examples.selectors = fake:example + \endcode + + To create a table of contents for a manual, create a subproject with + a \c{type} property and set it to \c{manual}. The page in the documentation + referred to by the \c{indexTitle} property must contain a list of links + that acts as a table of contents for the whole manual. QDoc will take the + information in this list and create a table of contents for the subproject. + + For example, the configuration file for Qt Creator defines only one + subproject for its documentation, including all the documentation in a + single manual: + + \code + qhp.QtCreator.subprojects = manual + qhp.QtCreator.subprojects.manual.title = Qt Creator Manual + qhp.QtCreator.subprojects.manual.indexTitle = Qt Creator Manual + qhp.QtCreator.subprojects.manual.type = manual + \endcode + + In this example, the page entitled "Qt Creator Manual" contains a nested + list of links to pages in the documentation which is duplicated in + Qt Assistant's Contents tab. +*/ + +/*! + \page 23-qdoc-configuration-cppvariables.html + \previouspage Creating Help Project Files + \contentspage QDoc Manual + \nextpage HTML Specific Configuration Variables + + \title C++ Specific Configuration Variables + + The C++ specific configuration variables are provided to avoid + erroneous documentation due to non-standard C++ constructs. + + \target Cpp.ignoredirectives-variable + \section1 Cpp.ignoredirectives + The \c Cpp.ignoredirectives variable makes QDoc ignore the + specified non-standard constructs, within C++ source code. + + If not specified by the \tt {\l Cpp.ignoretokens} or \tt {\l + Cpp.ignoredirectives} variables, non-standard constructs + (typically macros) can result in erroneous documentation. + + \code + Cpp.ignoredirectives = Q_DECLARE_INTERFACE \ + Q_DECLARE_OPERATORS_FOR_FLAGS \ + Q_DECLARE_PRIVATE \ + Q_DECLARE_PUBLIC \ + Q_DISABLE_COPY \ + Q_DUMMY_COMPARISON_OPERATOR \ + Q_ENUMS \ + Q_FLAGS \ + Q_INTERFACES \ + __attribute__ + \endcode + + makes sure that when processing the code below, for example, QDoc + will simply ignore the 'Q_ENUMS' and 'Q_FLAGS' expressions: + + \code + class Q_CORE_EXPORT Qt { + Q_OBJECT + Q_ENUMS(Orientation TextFormat BackgroundMode + DateFormat ScrollBarPolicy FocusPolicy + ContextMenuPolicy CaseSensitivity + LayoutDirection ArrowType) + Q_ENUMS(ToolButtonStyle) + Q_FLAGS(Alignment) + Q_FLAGS(Orientations) + Q_FLAGS(DockWidgetAreas) + + public: + ... + }; + \endcode + + The Q_OBJECT macro, however, is an exception: QDoc recognizes this + particular non-standard construct, so there is no need specifying + it using the \tt {\l Cpp.ignoredirectives} variable. + + Regarding the Q_CORE_EXPORT macro; see the documentation of the + \tt {\l Cpp.ignoretokens} variable. + + See also \l Cpp.ignoretokens. + + \target Cpp.ignoretokens-variable + \section1 Cpp.ignoretokens + + The \c Cpp.ignoretokens variable makes QDoc ignore the specified + non-standard constructs, within C++ source code. + + If not specified by the \tt {\l Cpp.ignoretokens} or \tt {\l + Cpp.ignoredirectives} variables, non-standard constructs + (typically macros) can result in erroneous documentation. + + In \l qtgui.qdocconf: + + \code + Cpp.ignoretokens = QAXFACTORY_EXPORT \ + QM_EXPORT_CANVAS \ + ... + Q_COMPAT_EXPORT \ + Q_CORE_EXPORT \ + Q_EXPLICIT \ + Q_EXPORT \ + ... + Q_XML_EXPORT + \endcode + + makes sure that when processing the code below, for example, QDoc + will simply ignore the 'Q_CORE_EXPORT' expression: + + \code + class Q_CORE_EXPORT Qt { + Q_OBJECT + Q_ENUMS(Orientation TextFormat BackgroundMode + DateFormat ScrollBarPolicy FocusPolicy + ContextMenuPolicy CaseSensitivity + LayoutDirection ArrowType) + Q_ENUMS(ToolButtonStyle) + Q_FLAGS(Alignment) + Q_FLAGS(Orientations) + Q_FLAGS(DockWidgetAreas) + public: + ... + }; + \endcode + + Regarding the Q_OBJECT, Q_ENUMS and Q_FLAGS macros; see the + documentation of the \tt {\l Cpp.ignoredirectives} variable. + + See also \l Cpp.ignoredirectives. +*/ + +/*! + \page 24-qdoc-configuration-htmlvariables.html + \previouspage C++ Specific Configuration Variables + \contentspage QDoc Manual + \nextpage Supporting Derived Projects + + \title HTML Specific Configuration Variables + + The HTML specific configuration variables define the generated + documentation's style, or define the contents of the + documentation's footer or postheader. The format of the variable + values are raw HTML. + + \target HTML.footer-variable + \section1 HTML.footer + + The \c HTML.footer variable defines the content of the generated + HTML documentation's footer. + + The footer is rendered at the bottom of the generated + documentation page. + + The variable's value is given as raw HTML code enclosed by + quotation marks. Note that if the value spans several lines, each + line needs to be enclosed by quotation marks. + + \code + HTML.footer = "

\n" \ + ... + "
" + \endcode + + The complete variable entry provides the standard footer of the + \l {http://doc.qt.digia.com/4.0/index.html} {Qt Reference Documentation}. + + \target HTML.postheader-variable + \section1 HTML.postheader + + The \c HTML.postheader variable defines the content of the + generated HTML documentation's postheader. + + The header is rendered at the top of the generated documentation + page. + + The variable's value is given as raw HTML enclosed by quotation + marks. Note that if the value spans several lines, each line needs + to be enclosed by quotation marks. + + \code + HTML.postheader = "" \ + "" \ + "
" + \endcode + + The complete variable entry in \l qtgui.qdocconf provides the + standard header of the \l {http://doc.qt.digia.com/} + {Qt Reference Documentation}. + + \target HTML.style-variable + \section1 HTML.style + + The HTML.style variable defines the style for + the generated HTML documentation. + + The variable's value is given as raw HTML enclosed by quotation + marks. Note that if the value spans several lines, each line needs + to be enclosed by quotation marks. + + \code + HTML.style = "h3.fn,span.fn" \ + "{ margin-left: 1cm; text-indent: -1cm; }\n" \ + "a:link { color: #004faf; text-decoration: none }\n" \ + "a:visited" \ + "{ color: #672967; text-decoration: none }\n" \ + "td.postheader { font-family: sans-serif }\n" \ + "tr.address { font-family: sans-serif }\n" \ + "body { background: #ffffff; color: black; }" + \endcode + + provides the HTML style for the \l + {http://doc.qt.digia.com/4.0/index.html} {Qt Reference + Documentation}. + + \target HTML.stylesheets-variable + \section1 HTML.stylesheets + + The HTML.stylesheets variable defines a list of stylesheets + to use for the generated HTML documentation. + + Using separate stylesheets for the documentation makes it easier + to customize and experiment with the style used once the contents + has been generated. Typically, it is only necessary to define a + single stylesheet for any set of documentation; for example: + + \code + HTML.stylesheets = classic.css + \endcode + + QDoc expects to find stylesheets in the directory containing the + \l qtgui.qdocconf file, and it will copy those specified to the output + directory alongside the HTML pages. + +*/ + +/*! + \page 25-qdoc-configuration-derivedprojects.html + \previouspage HTML Specific Configuration Variables + \contentspage QDoc Manual + \nextpage Example Manifest Files + + \title Supporting Derived Projects + + Some configuration variables allow you to use QDoc to support + Qt-based projects. They allow your project to contain links to the + online Qt documentation, which means that QDoc will be able to + create links to the class reference documentation, without any + explicit linking command. + + \target description-variable + \section1 description + + The description variable holds a short description of the + associated project. + + See also \l project. + + \target indexes-variable + \section1 indexes + + The \c indexes variable lists the index files that will be used to + generate references. + + For example. to make a derived Qt project contain links to the Qt + Reference documentation, you need to specify the associated index + file: + + \code + indexes = $QTDIR/doc/html/qt.index + \endcode + + See also \l project and \l url. + + \target project-variable + \section1 project + + The \c project variable provides a name for the project associated + with the \c .qdocconf file. + + The project's name is used to form a file name for the associated + project's \e index file. + + \code + project = QtCreator + \endcode + + This will cause an index file called \c qtcreator.index to be + created. + + See also \l description and \l indexes. + + \target url-variable + \section1 url + + The \c url variable holds the base URL for the reference + documentation associated with the current project. + + The URL is stored in the generated index file for the + project. When we use the index on its own, QDoc will use this as + the base URL when constructing links to classes, functions, and + other things listed in the index. + + \code + project = Qt + description = Qt Reference Documentation + url = http://qt-project.org/doc/qt-4.8/ + + ... + \endcode + + This makes sure that whenever \c qt.index is used to generate + references to for example Qt classes, the base URL is \c + http://doc.qt.digia.com/4.7. + + See also \l indexes. + + \target howto + \section1 How to Support Derived Projects + + This feature makes use of the comprehensive indexes generated by + QDoc when it creates the Qt reference documentation. + + For example, \l qtgui.qdocconf (the configuration file for Qt) + contains the following variable definitions: + + \code + project = Qt + description = Qt Reference Documentation + url = http://qt-project.org/doc/qt-4.8/ + + ... + \endcode + + The \l project variable name is used to form a file name for the + index file; in this case the \c qt.index file is created. The \l + url is stored in the index file. Afterwards, QDoc will use this + as the base URL when constructing links to classes, functions, + and other things listed in the index. + +*/ + +/*! + \page 26-qdoc-configuration-example-manifest-files.html + \previouspage Supporting Derived Projects + \contentspage QDoc Manual + + \title Example Manifest Files + + QDoc generates XML files that contain information about all documented + examples and demos. These files, named \c {examples-manifest.xml} and + \c {demos-manifest.xml}, are used by Qt Creator to present a list of + examples in its welcome screen and to link to their documentation. + + \section1 Manifest XML Structure + + A manifest file has the following structure: + + \code + + + + + + analog,clock,window + gui/analogclock/main.cpp + + ... + + + \endcode + + Each \c {} element contains information about a name, + description, the location of the project file and documentation, + as well as a list of tags associated with the example. + + \target metacontent + \section1 Manifest Meta Content + + It is possible to augment the manifest files with additional + meta-content - that is, extra attributes and tags for selected + examples, using the \c manifestmeta configuration command. + + One use case for meta-content is highlighting a number of prominent + examples. Another is improving search functionality by adding + relevant keywords as tags for a certain category of examples. + + The examples for which meta-content is applied to is specified using + one or more filters. Matching examples to filters is done based on + names, with each example name prefixed with a module name and a + slash. Simple wildcard matching is supported; by using \c {*} at the + end it's possible to match multiple examples with a single string. + + Example: + + \code + manifestmeta.filters = highlighted sql webkit global + + manifestmeta.highlighted.names = "QtGui/Analog Clock Window Example" \ + "QtWidgets/Analog Clock Example" + manifestmeta.highlighted.attributes = isHighlighted:true + + manifestmeta.sql.names = "QtSql/*" + manifestmeta.sql.tags = database,sql + + manifestmeta.webkit.names = "QtWebKitExamples/*" + manifestmeta.webkit.tags = webkit + + manifestmeta.global.names = * + manifestmeta.global.tags = qt5 + \endcode + + Above, an \c isHighlighted attribute is added to two examples. If + the attribute value is omitted, QDoc uses the string \c {true} by + default. Extra tags are added for Qt WebKit and Qt SQL examples, and + another tag is applied to all examples by using just \c {*} as the + match string. +*/ +/*! + \page 21-3-qt-dita-xml-output.html + \previouspage minimum.qdocconf + \contentspage QDoc Manual + \nextpage QDoc Manual + + \title Generating DITA XML Output + + QDoc can generate \l {http://dita.xml.org} {DITA XML output}. + + In your configuration file, set your \c {outputformats} variable + to \c {DITAXML}, and send the output to an appropriate directory: + + \code + outputdir = $QTDIR/doc/ditaxml + outputformats = DITAXML + \endcode + + And include these macros in your configuration file to prevent + QDoc from doing some escaping that doesn't validate in XML: + + \code + macro.aacute.DITAXML = "á" + macro.Aring.DITAXML = "Å" + macro.aring.DITAXML = "å" + macro.Auml.DITAXML = "Ä" + macro.br.DITAXML = " " + macro.BR.DITAXML = " " + macro.copyright.DITAXML = "©" + macro.eacute.DITAXML = "é" + macro.hr.DITAXML = " " + macro.iacute.DITAXML = "í" + macro.oslash.DITAXML = "ø" + macro.ouml.DITAXML = "ö" + macro.raisedaster.DITAXML = "*" + macro.rarrow.DITAXML = "→" + macro.reg.DITAXML = "®" + macro.uuml.DITAXML = "ü" + macro.mdash.DITAXML = "—" + macro.emptyspan.DITAXML = " " + \endcode + + You can also set default values for some of the tags in the DITA + \c {} and \c {} elements: + + \code + dita.metadata.default.author = Qt Development Frameworks + dita.metadata.default.permissions = all + dita.metadata.default.publisher = Qt Project + dita.metadata.default.copyryear = 2013 + dita.metadata.default.copyrholder = Qt Project + dita.metadata.default.audience = programmer + \endcode + + See the \l {12-0-qdoc-commands-miscellaneous.html#meta-command} + {\\meta} command for more details on DITA metadata. + +*/ + + +/*! + \page 21-1-minimum-qdocconf.html + \previouspage qtgui.qdocconf + \contentspage QDoc Manual + \nextpage Generating DITA XML Output + + \title minimum.qdocconf + + \quotefile examples/minimum.qdocconf +*/ + +/*! + \page 21-2-qtgui-qdocconf.html + \previouspage Supporting Derived Projects + \contentspage QDoc Manual + \nextpage minimum.qdocconf + + \title qtgui.qdocconf + + \quotefile files/qtgui.qdocconf +*/ -- cgit v1.2.3