# Propagate common variables via BuildInternals package.
set(QT_BUILD_SHARED_LIBS @BUILD_SHARED_LIBS@)
option(BUILD_SHARED_LIBS "Build Qt statically or dynamically" @BUILD_SHARED_LIBS@)
set(QT_CMAKE_EXPORT_NAMESPACE @QT_CMAKE_EXPORT_NAMESPACE@)
set(INSTALL_CMAKE_NAMESPACE @INSTALL_CMAKE_NAMESPACE@)
set(QT_BUILD_INTERNALS_PATH "${CMAKE_CURRENT_LIST_DIR}")

# The relocatable install prefix is meant to be used to find things like host binaries (syncqt),
# when the CMAKE_INSTALL_PREFIX is overridden to point to a different path (like when building a
# a Qt repo using Conan, which will set a random install prefix instead of installing into the
# original Qt install prefix).
get_filename_component(QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX
                       ${CMAKE_CURRENT_LIST_DIR}/../@qt_path_from_cmake_config_dir_to_prefix@
                       ABSOLUTE)

# If no explicit CMAKE_INSTALL_PREFIX is provided, force set the original Qt installation prefix,
# so that further modules / repositories are  installed into same original location.
# This means by default when configuring qtsvg / qtdeclarative, they will be installed the regular
# Qt installation prefix.
# If an explicit installation prefix is specified,  honor it.
# This is an attempt to support Conan, aka handle installation of modules into a
# different installation prefix than the original one. Also allow to opt out via a special variable.
# In a top-level build, QtSetup.cmake takes care of setting CMAKE_INSTALL_PREFIX.
if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT AND
        NOT QT_BUILD_INTERNALS_NO_FORCE_SET_INSTALL_PREFIX
        AND NOT QT_SUPERBUILD)
    set(qtbi_orig_prefix "@CMAKE_INSTALL_PREFIX@")
    set(qtbi_new_prefix "${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX}")
    set(qtbi_orig_staging_prefix "@CMAKE_STAGING_PREFIX@")
    if(CMAKE_HOST_WIN32)
        # Make sure we use exactly the original prefix if it points to the same directory as the new
        # one. This is needed for the case where the original prefix is passed without drive letter
        # to support installing with DESTDIR set.
        get_filename_component(qtbi_real_orig_prefix "${qtbi_orig_prefix}" REALPATH)
        get_filename_component(qtbi_real_new_prefix "${qtbi_new_prefix}" REALPATH)
        if(qtbi_real_orig_prefix STREQUAL qtbi_real_new_prefix)
            set(qtbi_new_prefix "${qtbi_orig_prefix}")
        endif()
    endif()
    if(NOT qtbi_orig_staging_prefix STREQUAL ""
            AND "${CMAKE_STAGING_PREFIX}" STREQUAL ""
            AND NOT QT_BUILD_INTERNALS_NO_FORCE_SET_STAGING_PREFIX)
        set(CMAKE_STAGING_PREFIX "${qtbi_new_prefix}" CACHE PATH
            "Staging path prefix, prepended onto install directories on the host machine." FORCE)
        set(qtbi_new_prefix "${qtbi_orig_prefix}")
    endif()
    set(CMAKE_INSTALL_PREFIX "${qtbi_new_prefix}" CACHE PATH
        "Install path prefix, prepended onto install directories." FORCE)
    unset(qtbi_orig_prefix)
    unset(qtbi_real_orig_prefix)
    unset(qtbi_new_prefix)
    unset(qtbi_real_new_prefix)
    unset(qtbi_orig_staging_prefix)
endif()

# Propagate developer builds to other modules via BuildInternals package.
if(@FEATURE_developer_build@)
    set(FEATURE_developer_build ON CACHE BOOL "Developer build." FORCE)
endif()

# Propagate non-prefix builds.
set(QT_WILL_INSTALL @QT_WILL_INSTALL@ CACHE BOOL
    "Boolean indicating if doing a Qt prefix build (vs non-prefix build)." FORCE)

set(QT_SOURCE_TREE "@QT_SOURCE_TREE@" CACHE PATH
"A path to the source tree of the previously configured QtBase project." FORCE)

# Propagate decision of building tests and examples to other repositories.
set(QT_BUILD_TESTS @QT_BUILD_TESTS@ CACHE BOOL "Build the testing tree.")
set(QT_BUILD_EXAMPLES @QT_BUILD_EXAMPLES@ CACHE BOOL "Build Qt examples")
set(QT_BUILD_BENCHMARKS @QT_BUILD_BENCHMARKS@ CACHE BOOL "Build Qt Benchmarks")
set(QT_BUILD_MANUAL_TESTS @QT_BUILD_MANUAL_TESTS@ CACHE BOOL "Build Qt manual tests")
set(QT_BUILD_MINIMAL_STATIC_TESTS @QT_BUILD_MINIMAL_STATIC_TESTS@ CACHE BOOL
    "Build minimal subset of tests for static Qt builds")

set(QT_BUILD_TESTS_BY_DEFAULT @QT_BUILD_TESTS_BY_DEFAULT@ CACHE BOOL
    "Should tests be built as part of the default 'all' target.")
set(QT_BUILD_EXAMPLES_BY_DEFAULT @QT_BUILD_EXAMPLES_BY_DEFAULT@ CACHE BOOL
    "Should examples be built as part of the default 'all' target.")
set(QT_BUILD_TOOLS_BY_DEFAULT @QT_BUILD_TOOLS_BY_DEFAULT@ CACHE BOOL
    "Should tools be built as part of the default 'all' target.")

set(QT_BUILD_EXAMPLES_AS_EXTERNAL "@QT_BUILD_EXAMPLES_AS_EXTERNAL@" CACHE BOOL
    "Should examples be built as ExternalProjects.")

# Propagate usage of ccache.
set(QT_USE_CCACHE @QT_USE_CCACHE@ CACHE BOOL "Enable the use of ccache")

# Propagate usage of versioned hard link.
set(QT_CREATE_VERSIONED_HARD_LINK "@QT_CREATE_VERSIONED_HARD_LINK@" CACHE BOOL
    "Enable the use of versioned hard link")

# The minimum version required to build Qt.
set(QT_SUPPORTED_MIN_CMAKE_VERSION_FOR_BUILDING_QT "@supported_min_version_for_building_qt@")
set(QT_COMPUTED_MIN_CMAKE_VERSION_FOR_BUILDING_QT "@computed_min_version_for_building_qt@")

# The lower and upper CMake version policy range as computed by qtbase.
# These values are inherited when building other Qt repositories, unless overridden
# in the respective repository .cmake.conf file.
# These are not cache variables, so that they can be overridden in each repo directory scope.
if(NOT DEFINED QT_MIN_NEW_POLICY_CMAKE_VERSION)
    set(QT_MIN_NEW_POLICY_CMAKE_VERSION "@min_new_policy_version@")
endif()
if(NOT DEFINED QT_MAX_NEW_POLICY_CMAKE_VERSION)
    set(QT_MAX_NEW_POLICY_CMAKE_VERSION "@max_new_policy_version@")
endif()

get_property(__qt_internal_extras_is_multi_config GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)

# We want the same build type to be used when configuring all Qt repos or standalone
# tests or single tests.
# To do that, we need to force-set the CMAKE_BUILD_TYPE cache var because CMake itself
# initializes it with the value of CMAKE_BUILD_TYPE_INIT at the start of project
# configuration, so we need to override it.
# Note the value of CMAKE_BUILD_TYPE_INIT is different based on the platform, most
# Linux and macOS platforms will have it empty, but Windows platforms will have a value.
#
# We can't reliably differentiate between a value set on the command line by the user
# and one set by CMake, so we use a few heuristics:
# 1) When using a qt.toolchain.cmake file, we rely on the toolchain file to tell us
#    if a value was set by the user at initial configure time. On a 2nd run there will
#    always be a value in the cache, but at that point we've already set it to whatever it needs
#    to be.
# 2) If a toolchain file is not used, we rely on the value of the CMake internal
#    CMAKE_BUILD_TYPE_INIT variable.
#    This won't work reliably on Windows where CMAKE_BUILD_TYPE_INIT is non-empty.
#
# Both cases won't handle an empty "" config set by the user, but we claim that's an
# unsupported config when building Qt.
#
# Allow an opt out when QT_NO_FORCE_SET_CMAKE_BUILD_TYPE is set.
# Finally, don't set the variable if a multi-config generator is used. This can happen
# when qtbase is built with a single config, but a test is built with a multi-config generator.
function(qt_internal_force_set_cmake_build_type_conditionally value)
    # STREQUAL check needs to be expanded variables because an undefined var is not equal to an
    # empty defined var.
    if("${CMAKE_BUILD_TYPE}" STREQUAL "${CMAKE_BUILD_TYPE_INIT}"
        AND NOT __qt_toolchain_cmake_build_type_before_project_call
        AND NOT QT_NO_FORCE_SET_CMAKE_BUILD_TYPE
        AND NOT __qt_internal_extras_is_multi_config)
        set(CMAKE_BUILD_TYPE "${value}" CACHE STRING "Choose the type of build." FORCE)
    endif()
endfunction()

# Extra set of exported variables
@QT_EXTRA_BUILD_INTERNALS_VARS@