Usage: configure [options] Installation options: These are optional, but you may specify install directories. -prefix ...... The deployment directory, as seen on the target device. (default /usr/local/Qt-$QT_VERSION, $PWD if -developer-build is active) -extprefix ... The installation directory, as seen on the host machine. (default SYSROOT/PREFIX) -hostprefix [dir] .. The installation directory for build tools running on the host machine. If [dir] is not given, the current build directory will be used. (default EXTPREFIX) You may use these to change the layout of the install. Note that all directories except -sysconfdir should be located under -prefix/-hostprefix: -bindir ......... User executables will be installed to (default PREFIX/bin) -headerdir ...... Headers will be installed to (default PREFIX/include) -libdir ......... Libraries will be installed to (default PREFIX/lib) -archdatadir .... Arch-dependent data used by Qt will be installed to (default PREFIX) -plugindir ...... Plugins will be installed to (default ARCHDATADIR/plugins) -libexecdir ..... Program executables will be installed to (default ARCHDATADIR/libexec, ARCHDATADIR/bin for MinGW) -importdir ...... Imports for QML1 will be installed to (default ARCHDATADIR/imports) -qmldir ......... Imports for QML2 will be installed to (default ARCHDATADIR/qml) -datadir ........ Arch-independent data used by Qt will be installed to (default PREFIX) -docdir ......... Documentation will be installed to (default DATADIR/doc) -translationdir . Translations of Qt programs will be installed to (default DATADIR/translations) -sysconfdir ..... Settings used by Qt programs will be looked for in (default PREFIX/etc/xdg) -examplesdir .... Examples will be installed to (default PREFIX/examples) -testsdir ....... Tests will be installed to (default PREFIX/tests) -hostbindir ..... Host executables will be installed to (default HOSTPREFIX/bin) -hostlibdir ..... Host libraries will be installed to (default HOSTPREFIX/lib) -hostdatadir .... Data used by qmake will be installed to (default HOSTPREFIX) Configure options: The defaults (*) are usually acceptable. A plus (+) denotes a default value that needs to be evaluated. If the evaluation succeeds, the feature is included. Here is a short explanation of each option: * -release ............. Compile and link Qt with debugging turned off. -debug ............... Compile and link Qt with debugging turned on. -debug-and-release ... Compile and link two versions of Qt, with and without debugging turned on (Apple platforms only). -force-debug-info .... Create symbol files for release builds. -developer-build ..... Compile and link Qt with Qt developer options (including auto-tests exporting) * -no-optimized-tools .. Do not build optimized host tools even in debug build. -optimized-tools ..... Build optimized host tools even in debug build. -opensource .......... Compile and link the Open-Source Edition of Qt. -commercial .......... Compile and link the Commercial Edition of Qt. -confirm-license ..... Automatically acknowledge the license (use with either -opensource or -commercial) -c++std .... Compile Qt with C++ standard edition (c++11, c++14, c++1z) Default: highest supported * -shared .............. Create and use shared Qt libraries. -static .............. Create and use static Qt libraries. -no-accessibility .... Do not compile Accessibility support. Disabling accessibility is not recommended, as it will break QStyle and may break other internal parts of Qt. With this switch you create a source incompatible version of Qt, which is unsupported. + -accessibility ....... Compile Accessibility support. -no-sql- ..... Disable SQL . -sql- Enable SQL plugin. Possible values for : [db2, ibase, mysql, oci, odbc, psql, sqlite, sqlite2, tds] -system-sqlite ....... Use sqlite from the operating system. -no-qml-debug ........ Do not build the in-process QML debugging support. + -qml-debug ........... Build the QML debugging support. -platform target ..... The operating system and compiler you are building on (default detected from host system). See the README file for a list of supported operating systems and compilers. -no-sse2 ............. Do not compile with use of SSE2 instructions. -no-sse3 ............. Do not compile with use of SSE3 instructions. -no-ssse3 ............ Do not compile with use of SSSE3 instructions. -no-sse4.1 ........... Do not compile with use of SSE4.1 instructions. -no-sse4.2 ........... Do not compile with use of SSE4.2 instructions. -no-avx .............. Do not compile with use of AVX instructions. -no-avx2 ............. Do not compile with use of AVX2 instructions. -no-avx512 ........... Do not compile with use of AVX512 instructions. -no-mips_dsp ......... Do not compile with use of MIPS DSP instructions. -no-mips_dspr2 ....... Do not compile with use of MIPS DSP rev2 instructions. -qtnamespace .. Wraps all Qt library code in 'namespace {...}'. -qtlibinfix .. Renames all libQt*.so to libQt*.so. -testcocoon .......... Instrument Qt with the TestCocoon code coverage tool. -gcov ................ Instrument Qt with the GCov code coverage tool. -D .......... Add an explicit define to the preprocessor. -I .......... Add an explicit include path. -L .......... Add an explicit library path. + -pkg-config .......... Use pkg-config to detect include and library paths. By default, configure determines whether to use pkg-config or not with some heuristics such as checking the environment variables. -no-pkg-config ....... Disable use of pkg-config. -force-pkg-config .... Force usage of pkg-config (skips pkg-config usability detection heuristic). -help, -h ............ Display this information. Third Party Libraries: -qt-zlib ............. Use the zlib bundled with Qt. + -system-zlib ......... Use zlib from the operating system. See http://www.gzip.org/zlib -no-mtdev ............ Do not compile mtdev support. + -mtdev ............... Enable mtdev support. + -no-journald ......... Do not send logging output to journald. -journald ............ Send logging output to journald. + -no-syslog ........... Do not send logging output to syslog. -syslog .............. Send logging output to syslog. -no-gif .............. Do not compile GIF reading support. -no-libpng ........... Do not compile PNG support. -qt-libpng ........... Use the libpng bundled with Qt. + -system-libpng ....... Use libpng from the operating system. See http://www.libpng.org/pub/png -no-libjpeg .......... Do not compile JPEG support. -qt-libjpeg .......... Use the libjpeg bundled with Qt. + -system-libjpeg ...... Use libjpeg from the operating system. See http://www.ijg.org -no-doubleconversion ..... Use sscanf_l and snprintf_l for (imprecise) double conversion. -qt-doubleconversion ..... Use the libdouble-conversion bundled with Qt. + -system-doubleconversion . Use the libdouble-conversion provided by the system. See https://github.com/google/double-conversion -no-freetype ......... Do not compile in Freetype2 support. -qt-freetype ......... Use the libfreetype bundled with Qt. + -system-freetype...... Use the libfreetype provided by the system (enabled if -fontconfig is active). See http://www.freetype.org -no-harfbuzz ......... Do not compile HarfBuzz-NG support. -qt-harfbuzz ......... Use HarfBuzz-NG bundled with Qt to do text shaping. It can still be disabled by setting the QT_HARFBUZZ environment variable to "old". + -system-harfbuzz ..... Use HarfBuzz-NG from the operating system to do text shaping. It can still be disabled by setting the QT_HARFBUZZ environment variable to "old". See http://www.harfbuzz.org -no-openssl .......... Do not compile support for OpenSSL. + -openssl ............. Enable run-time OpenSSL support. -openssl-linked ...... Enabled linked OpenSSL support. * -no-libproxy ......... Do not compile support for libproxy -libproxy ............ Use libproxy from the operating system. -qt-pcre ............. Use the PCRE library bundled with Qt. + -system-pcre ......... Use the PCRE library from the operating system. -qt-xcb .............. Use xcb- libraries bundled with Qt. (libxcb.so will still be used from operating system). + -system-xcb .......... Use xcb- libraries from the operating system. -xkb-config-root ..... Set default XKB config root. This option is used only together with -qt-xkbcommon-x11. -qt-xkbcommon-x11 .... Use the xkbcommon library bundled with Qt in combination with xcb. + -system-xkbcommon-x11 Use the xkbcommon library from the operating system in combination with xcb. -no-xkbcommon-evdev .. Do not use X-less xkbcommon when compiling libinput support. * -xkbcommon-evdev ..... Use X-less xkbcommon when compiling libinput support. -no-xinput2 .......... Do not compile XInput2 support. * -xinput2 ............. Compile XInput2 support. -no-xcb-xlib.......... Do not compile Xcb-Xlib support. * -xcb-xlib............. Compile Xcb-Xlib support. -no-glib ............. Do not compile Glib support. + -glib ................ Compile Glib support. -no-pulseaudio ....... Do not compile PulseAudio support. + -pulseaudio .......... Compile PulseAudio support. -no-alsa ............. Do not compile ALSA support. + -alsa ................ Compile ALSA support. -no-gtk .............. Do not compile GTK platform theme support. + -gtk ................. Compile GTK platform theme support. Additional options: -make ......... Add part to the list of parts to be built at make time. (defaults to: libs tools examples) -nomake ....... Exclude part from the list of parts to be built. -skip ....... Exclude an entire module from the build. -no-compile-examples . Install only the sources of examples. -no-gui .............. Don't build the Qt GUI module and dependencies. + -gui ................. Build the Qt GUI module and dependencies. -no-widgets .......... Don't build the Qt Widgets module and dependencies. + -widgets ............. Build the Qt Widgets module and dependencies. -R .......... Add an explicit runtime library path to the Qt libraries. -no-rpath ............ Do not use the library install path as a runtime library path. On Apple platforms, this implies using absolute install names (based in -libdir) for dynamic libraries and frameworks. + -rpath ............... Link Qt libraries and executables using the library install path as a runtime library path. Equivalent to -R install_libpath -continue ............ Continue as far as possible if an error occurs. -verbose, -v ......... Print verbose information about each step of the configure process. -silent .............. Reduce the build output so that warnings and errors can be seen more easily. -no-cups ............. Do not compile CUPS support. * -cups ................ Compile CUPS support. Requires cups/cups.h and libcups.so.2. -no-iconv ............ Do not compile support for iconv(3). * -iconv ............... Compile support for iconv(3). -no-evdev ............ Do not compile support for evdev. * -evdev ............... Compile support for evdev. -no-tslib ............ Do not compile support for tslib. * -tslib ............... Compile support for tslib. -no-icu .............. Do not compile support for ICU libraries. + -icu ................. Compile support for ICU libraries. -no-fontconfig ....... Do not compile FontConfig support. + -fontconfig .......... Compile FontConfig support. -no-strip ............ Do not strip binaries and libraries of unneeded symbols. * -strip ............... Strip binaries and libraries of unneeded symbols when installing. * -no-pch .............. Do not use precompiled header support. -pch ................. Use precompiled header support. * -no-ltcg Do not use Link Time Code Generation -ltcg Use Link Time Code Generation. -no-dbus ............. Do not compile the Qt D-Bus module. + -dbus-linked ......... Compile the Qt D-Bus module and link to libdbus-1. -dbus-runtime ........ Compile the Qt D-Bus module and dynamically load libdbus-1. -reduce-relocations .. Reduce relocations in the libraries through extra linker optimizations (Qt/X11 and Qt for Embedded Linux only; experimental; needs GNU ld >= 2.18). -no-use-gold-linker .. Do not link using the GNU gold linker. + -use-gold-linker ..... Link using the GNU gold linker if available. -force-asserts ....... Force Q_ASSERT to be enabled even in release builds. -sanitize [address|thread|memory|undefined] Enables the specified compiler sanitizer. -device ............... Cross-compile for device (experimental) -device-option ... Add device specific options for the device mkspec (experimental) -host-option ..... Add host specific options for the host mkspec * -no-separate-debug-info ...... Do not store debug information in a separate file. -separate-debug-info ......... Strip debug information into a separate file. -no-xcb .............. Do not compile Xcb (X protocol C-language Binding) support. * -xcb ................. Compile Xcb support. -no-eglfs ............ Do not compile EGLFS (EGL Full Screen/Single Surface) support. * -eglfs ............... Compile EGLFS support. -no-kms .............. Do not compile backends for KMS. * -kms ................. Compile backends for KMS. -no-gbm .............. Do not compile backends for GBM. * -gbm ................. Compile backends for GBM. * -no-directfb ......... Do not compile DirectFB support. -directfb ............ Compile DirectFB support. -no-linuxfb .......... Do not compile Linux Framebuffer support. * -linuxfb ............. Compile Linux Framebuffer support. * -no-mirclient......... Do not compile Mir client support. -mirclient............ Compile Mir client support. -qpa .......... Sets the default QPA platform (e.g xcb, cocoa, windows). -xplatform target .... The target platform when cross-compiling. -sysroot ....... Sets as the target compiler's and qmake's sysroot and also sets pkg-config paths. -no-gcc-sysroot ...... When using -sysroot, it disables the passing of --sysroot to the compiler -external-hostbindir .. Path to Qt tools built for this machine. Use this when -platform does not match the current system, i.e., to make a Canadian Cross Build. -no-feature- Do not compile in . -feature- ... Compile in . The available features are described in src/corelib/global/qfeatures.txt -qreal [double|float] typedef qreal to the specified type. The default is double. Note that changing this flag affects binary compatibility. -no-opengl ........... Do not support OpenGL. -opengl ........ Enable OpenGL support With no parameter, this will attempt to auto-detect OpenGL ES 2.0 and higher, or regular desktop OpenGL. Use es2 for to override auto-detection. -no-libinput ......... Do not support libinput. * -libinput ............ Enable libinput support. -no-gstreamer ........ Do not support GStreamer. + -gstreamer . Enable GStreamer support With no parameter, this will attempt to auto-detect GStreamer 0.10 and 1.0. GStreamer 1.0 is used by default when available. Use 0.10 or 1.0 for to override auto-detection. -no-system-proxies ... Do not use system network proxies by default. * -system-proxies ...... Use system network proxies by default. * -no-sctp ............. Do not compile SCTP network protocol support. -sctp ................ Compile SCTP support. -no-warnings-are-errors Make warnings be treated normally -warnings-are-errors Make warnings be treated as errors (enabled if -developer-build is active) QNX options: -no-slog2 ........... Do not compile with slog2 support. -slog2 .............. Compile with slog2 support. -no-pps ............. Do not compile with pps support. -pps ................ Compile with pps support. -no-imf ............. Do not compile with imf support. -imf ................ Compile with imf support. -no-lgmon ........... Do not compile with lgmon support. -lgmon .............. Compile with lgmon support. Apple platform options: -Fstring ............ Add an explicit framework path. * -framework .......... Build Qt as a series of frameworks and link tools against those frameworks. -no-framework ....... Do not build Qt as a series of frameworks. * -securetransport .... Use SecureTransport instead of OpenSSL -no-securetransport . Do not use SecureTransport, either use OpenSSL or do not use any SSL backend at all (if combined with -no-openssl). -sdk .......... Build Qt using Apple provided SDK . The argument should be one of the available SDKs as listed by 'xcodebuild -showsdks'. Note that the argument applies only to Qt libraries and applications built using the target mkspec - not host tools such as qmake, moc, rcc, etc. Android options: -android-sdk path .............. The Android SDK root path. (default $ANDROID_SDK_ROOT) -android-ndk path .............. The Android NDK root path. (default $ANDROID_NDK_ROOT) -android-ndk-platform .......... Sets the android platform -android-ndk-host .............. Sets the android NDK host (linux-x86, linux-x86_64, etc.) (default $ANDROID_NDK_HOST) -android-arch .................. Sets the android architecture (armeabi, armeabi-v7a, x86, mips, arm64-v8a, x86_64, mips64) -android-toolchain-version ..... Sets the android toolchain version -no-android-style-assets ....... Do not compile in the code which automatically extracts style assets from the run-time device. Setting this will make the Android style behave incorrectly, but will enable compatibility with the LGPL2.1 license. * -android-style-assets .......... Compile the code which automatically extracts style assets from the run-time device. This option will make the Android platform plugin incompatible with the LGPL2.1.