QT_FOR_CONFIG += core-private

# DESTDIR will be empty if not set in the app .pro file; make sure it has a value
isEmpty(DESTDIR): DESTDIR = $$OUT_PWD

exists($$QMAKE_QT_CONFIG) {
## this may be subject to change

    ## qmake puts a space if done otherwise
    !isEmpty(QT_WASM_EXTRA_EXPORTED_METHODS): {
        EXPORTED_METHODS = UTF16ToString,stringToUTF16,JSEvents,specialHTMLTargets,FS,callMain,$$QT_WASM_EXTRA_EXPORTED_METHODS
    } else {
        EXPORTED_METHODS = UTF16ToString,stringToUTF16,JSEvents,specialHTMLTargets,FS,callMain
    }
    EMCC_LFLAGS += -s EXPORTED_RUNTIME_METHODS=$$EXPORTED_METHODS

    !isEmpty(QT_WASM_EXPORT_NAME): {
        EXPORT_NAME = $$QT_WASM_EXPORT_NAME
    } else {
        TARGET_SANITIZED = $$replace(TARGET, [^a-zA-Z0-9_], _)
        EXPORT_NAME = $${TARGET_SANITIZED}_entry
    }

    EMCC_LFLAGS += -s EXPORT_NAME=$$EXPORT_NAME

    qtConfig(thread) {

        EMCC_LFLAGS += -pthread
        EMCC_CFLAGS += -pthread

        # Create worker threads at startup. This is supposed to be an optimization,
        # however exceeding the pool size has been obesverved to hang the application.
        POOL_SIZE = 4
        !isEmpty(QT_WASM_PTHREAD_POOL_SIZE) {
            POOL_SIZE = $$QT_WASM_PTHREAD_POOL_SIZE
        }

        message("Setting PTHREAD_POOL_SIZE to" $$POOL_SIZE)
        EMCC_LFLAGS += -s PTHREAD_POOL_SIZE=$$POOL_SIZE
    }

    # Set memory options
    EMCC_LFLAGS += -sALLOW_MEMORY_GROWTH
    isEmpty(QT_WASM_INITIAL_MEMORY) {
        INITIAL_MEMORY = 50MB # emscripten default is 16MB, we need slightly more
    } else {
        INITIAL_MEMORY = $$QT_WASM_INITIAL_MEMORY
    }
    EMCC_LFLAGS += -s INITIAL_MEMORY=$$INITIAL_MEMORY
    isEmpty(QT_WASM_MAXIMUM_MEMORY) {
        MAXIMUM_MEMORY = 4GB # 32-bit max
    } else {
        MAXIMUM_MEMORY = $$QT_WASM_MAXIMUM_MEMORY
    }
    EMCC_LFLAGS += -s MAXIMUM_MEMORY=$$MAXIMUM_MEMORY

    qtConfig(sse2) {
        QMAKE_CFLAGS += -O2 -msimd128 -msse -msse2
        QMAKE_CXXFLAGS += -O2 -msimd128 -msse -msse2
        QMAKE_LFLAGS       += -msimd128 -msse -msse2
        QMAKE_LFLAGS_DEBUG += -msimd128 -msse -msse2
    }

    qtConfig(shared) {
        contains(TEMPLATE, .*app) {
            EMCC_MODULE_FLAGS = -s MAIN_MODULE=1
        }
        contains(TEMPLATE, .*lib):!static: {
            EMCC_MODULE_FLAGS = -s SIDE_MODULE=1
        }
        EMCC_CFLAGS += $$EMCC_MODULE_FLAGS
        EMCC_LFLAGS += $$EMCC_MODULE_FLAGS
    }

    QMAKE_LFLAGS       += $$EMCC_LFLAGS
    QMAKE_LFLAGS_DEBUG += $$EMCC_LFLAGS
    QMAKE_CFLAGS += $$EMCC_CFLAGS
    QMAKE_CXXFLAGS += $$EMCC_CFLAGS
}

# Create js and wasm files for applications
contains(TEMPLATE, .*app) {
    TARGET_BASE = $${TARGET}
    TARGET_HTML = $${TARGET}.html
    TARGET_JS = $${TARGET}.js

    # Make the emscripten compiler generate a js file
    TARGET = $$TARGET_JS

    QMAKE_INCDIR += $$(HOME)/.emscripten_ports/openssl/include

    CONFIG += static
    js_file.files = $$TARGET_JS
    js_file.path  = $$target.path
    isEmpty(js_file.path): \
        js_file.path += ./
    INSTALLS += js_file

    # Copy hosting html and javascript to the application build directory.
    exists($$[QT_INSTALL_PLUGINS]/platforms/wasm_shell.html) {
        # don't pass this until it's installed somewhere
        # otherwise makespec test fails during qt configure
        WASM_PLUGIN_PATH = $$[QT_INSTALL_PLUGINS]/platforms
    } else {
        ## internal build. not installed
        WASM_PLUGIN_PATH = $$PWD/../../../src/plugins/platforms/wasm
    }

    PRELOAD = ""
    shared {
        PRELOAD = "preload:\ ['qt_plugins.json',\ 'qt_qml_imports.json'],"
    }

    # Copy/Generate main .html file (e.g. myapp.html) from the webassembly_shell.html by
    # replacing the app name placeholder with the actual app name.
    apphtml.name = application main html file
    apphtml.output = $$DESTDIR/$$TARGET_HTML
    apphtml.commands = $$QMAKE_STREAM_EDITOR -e s/@APPNAME@/$$TARGET_BASE/g -e s/@APPEXPORTNAME@/$$EXPORT_NAME/g -e s/@PRELOAD@/$$PRELOAD/g $$WASM_PLUGIN_PATH/wasm_shell.html > $$DESTDIR/$$TARGET_HTML
    apphtml.input = $$WASM_PLUGIN_PATH/wasm_shell.html
    apphtml.depends = $$apphtml.input
    QMAKE_EXTRA_COMPILERS += apphtml

    appjs.name = application qtloader.js
    appjs.output = $$DESTDIR/qtloader.js
    appjs.commands = $$QMAKE_COPY $$shell_path($$WASM_PLUGIN_PATH/qtloader.js) $$shell_path($$DESTDIR)
    appjs.input = $$WASM_PLUGIN_PATH/qtloader.js
    appjs.depends = $$appjs.input
    QMAKE_EXTRA_COMPILERS += appjs

    appsvg.name = application qtlogo.svg
    appsvg.output = $$DESTDIR/qtlogo.svg
    appsvg.commands = $$QMAKE_COPY $$shell_path($$WASM_PLUGIN_PATH/qtlogo.svg) $$shell_path($$DESTDIR)
    appsvg.input = $$WASM_PLUGIN_PATH/qtlogo.svg
    appsvg.depends = $$appsvg.input
    QMAKE_EXTRA_COMPILERS += appsvg

    QMAKE_EXTRA_TARGETS += apphtml appjs appsvg
    POST_TARGETDEPS += apphtml appjs appsvg

    # Add manual target to make "make -B shellfiles" work.
    shellfiles.target = shellfiles
    shellfiles.depends = apphtml appjs appsvg
    QMAKE_EXTRA_TARGETS += shellfiles

    # emscripten ports are linked into the main module (this app), not the Qt
    # libs which reference them
    qt {
        qt_depends = $$resolve_depends(QT, "QT.")
        contains(qt_depends, core(-private)?): QMAKE_LFLAGS += \
            $$QMAKE_LIBS_THREAD $$QMAKE_LIBS_ZLIB
        contains(qt_depends, gui(-private)?): QMAKE_LFLAGS += \
            $$QMAKE_LIBS_FREETYPE $$QMAKE_LIBS_LIBPNG
    }
}

qtConfTest_emccVersion()

CONFIG(debug):!isEmpty(QT_WASM_SOURCE_MAP) {

    EMCC_VERSION = $$qtSystemEmccVersion()

    QMAKE_LFLAGS += -gsource-map
    # Pass --source-map-base on the linker line. This informs the
    # browser where to find the source files when debugging.
    WASM_SOURCE_MAP_BASE = http://localhost:8000/
    !isEmpty(QT_WASM_SOURCE_MAP_BASE):\
        WASM_SOURCE_MAP_BASE = $$QT_WASM_SOURCE_MAP_BASE
    QMAKE_LFLAGS += --source-map-base $$WASM_SOURCE_MAP_BASE
}


# Creates the stand-alone version of the library from bitcode
!static:contains(TEMPLATE, .*lib): {
    load(resolve_target)
    QMAKE_POST_LINK += $$QMAKE_LINK_SHLIB $$QMAKE_RESOLVED_TARGET -o $${QMAKE_RESOLVED_TARGET}.js

    QMAKE_INCDIR += $$(HOME)/.emscripten_ports/openssl/include
}