/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:FDL$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** GNU Free Documentation License Usage ** Alternatively, this file may be used under the terms of the GNU Free ** Documentation License version 1.3 as published by the Free Software ** Foundation and appearing in the file included in the packaging of ** this file. Please review the following information to ensure ** the GNU Free Documentation License version 1.3 requirements ** will be met: https://www.gnu.org/licenses/fdl-1.3.html. ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \page sql-driver.html \title SQL Database Drivers \brief How to configure and install Qt SQL drivers for supported databases. The Qt SQL module uses driver \l{How to Create Qt Plugins}{plugins} to communicate with the different database APIs. Since Qt's SQL Module API is database-independent, all database-specific code is contained within these drivers. Several drivers are supplied with Qt, and other drivers can be added. The driver source code is supplied and can be used as a model for \l{#development}{writing your own drivers}. \tableofcontents \section1 Supported Databases The table below lists the drivers included with Qt: \table \header \li Driver name \li DBMS \row \li \l{#QDB2}{QDB2} \li IBM DB2 (version 7.1 and above) \row \li \l{#QIBASE}{QIBASE} \li Borland InterBase \row \li \l{#QMYSQL}{QMYSQL / MARIADB} \li MySQL or MariaDB (version 5.0 and above) \row \li \l{#QOCI}{QOCI} \li Oracle Call Interface Driver \row \li \l{#QODBC}{QODBC} \li Open Database Connectivity (ODBC) - Microsoft SQL Server and other ODBC-compliant databases \row \li \l{#QPSQL}{QPSQL} \li PostgreSQL (versions 7.3 and above) \row \li \l{#QSQLITE2}{QSQLITE2} \li SQLite version 2 \note obsolete since Qt 5.14 \row \li \l{#QSQLITE}{QSQLITE} \li SQLite version 3 \row \li \l{#QTDS}{QTDS} \li Sybase Adaptive Server \note obsolete since Qt 4.7 \endtable SQLite is the in-process database system with the best test coverage and support on all platforms. Oracle via OCI, PostgreSQL, and MySQL through either ODBC or a native driver are well-tested on Windows and Linux. The completeness of the support for other systems depends on the availability and quality of client libraries. \b{Note:} To build a driver plugin you need to have the appropriate client library for your Database Management System (DBMS). This provides access to the API exposed by the DBMS, and is typically shipped with it. Most installation programs also allow you to install "development libraries", and these are what you need. These libraries are responsible for the low-level communication with the DBMS. Also make sure to install the correct database libraries for your Qt architecture (32 or 64 bit). \note When using Qt under Open Source terms but with a proprietary database, verify the client library's license compatibility with the LGPL. \target building \section1 Building the Drivers The Qt \c configure script tries to automatically detect the available client libraries on your machine. Run \c{configure -help} to see what drivers can be built. You should get an output similar to this: \snippet code/doc_src_sql-driver.qdoc 0 The \c configure script cannot detect the necessary libraries and include files if they are not in the standard paths, so it may be necessary to specify these paths using the \c *_INCDIR=, \c *_LIBDIR=, or \c *_PREFIX= command-line options. For example, if your MySQL files are installed in \c /usr/local/mysql (or in \c{C:/Program Files/MySQL/MySQL Connector C 6.1} on Windows), then pass the following parameter to configure: \c MYSQL_PREFIX=/usr/local/mysql (or \c{MYSQL_PREFIX="C:/Program Files/MySQL/MySQL Connector C 6.1"} for Windows). The particulars for each driver are explained below. If something goes wrong and you want qmake to recheck your available drivers, you must remove \e{config.cache} in \e{/qtbase/src/plugins/sqldrivers} - otherwise qmake will not search for the available drivers again. If you encounter an error during the qmake stage, open \e{config.log} to see what went wrong. A typical qmake run (in this case to configure for MySQL) looks like this: \snippet code/doc_src_sql-driver.qdoc 41 Due to the practicalities of dealing with external dependencies, only the SQLite3 plugin is shipped with binary builds of Qt. To be able to add additional drivers to the Qt installation without re-building all of Qt, it is possible to configure and build the \c qtbase/src/plugins/sqldrivers directory outside of a full Qt build directory. Note that it is not possible to \e configure each driver separately, only all of them at once. Drivers can be \e built separately, though. If the Qt build is configured with \c{-prefix}, it is necessary to install the plugins after building them, too. For example: \snippet code/doc_src_sql-driver.qdoc 4 \section1 Driver Specifics \target QMYSQL \section2 QMYSQL for MySQL or MariaDB 5 and higher MariaDB is a fork of MySQL intended to remain free and open-source software under the GNU General Public License. MariaDB intended to maintain high compatibility with MySQL, ensuring a drop-in replacement capability with library binary parity and exact matching with MySQL APIs and commands. Therefore the plugin for MySQL and MariaDB are combined into one Qt plugin. \section3 QMYSQL Stored Procedure Support MySQL 5 has stored procedure support at the SQL level, but no API to control IN, OUT, and INOUT parameters. Therefore, parameters have to be set and read using SQL commands instead of QSqlQuery::bindValue(). Example stored procedure: \snippet code/doc_src_sql-driver.qdoc 1 Source code to access the OUT values: \snippet code/doc_src_sql-driver.cpp 2 \b{Note:} \c{@outval1} and \c{@outval2} are variables local to the current connection and will not be affected by queries sent from another host or connection. \section3 Embedded MySQL Server The MySQL embedded server is a drop-in replacement for the normal client library. With the embedded MySQL server, a MySQL server is not required to use MySQL functionality. To use the embedded MySQL server, simply link the Qt plugin to \c libmysqld instead of \c libmysqlclient. This can be done by adding \c MYSQL_LIBS=-lmysqld to the configure command line. Please refer to the MySQL documentation, chapter "libmysqld, the Embedded MySQL Server Library" for more information about the MySQL embedded server. \section3 How to Build the QMYSQL Plugin on Unix and \macos You need the MySQL / MariaDB header files, as well as the shared library \c{libmysqlclient.so} / \c{libmariadb.so}. Depending on your Linux distribution, you may need to install a package which is usually called "mysql-devel" or "mariadb-devel". Tell \l qmake where to find the MySQL / MariaDB header files and shared libraries (here it is assumed that MySQL / MariaDB is installed in \c{/usr/local}) and run \c{make}: \snippet code/doc_src_sql-driver.qdoc 3 \section3 How to Build the QMYSQL Plugin on Windows You need to get the MySQL installation files (e.g. \l {https://dev.mysql.com/downloads/installer/}{mysql-installer-web-community-8.0.18.0.msi}) or \l {https://downloads.mariadb.org/connector-c/3.1.5/}{mariadb-connector-c-3.1.5-win64.msi}. Run the installer, select custom installation and install the MySQL C Connector which matches your Qt installation (x86 or x64). After installation make sure that the needed files are there: \list \li \c {/lib/libmysql.lib} \li \c {/lib/libmysql.dll} \li \c {/include/mysql.h} \endlist and for MariaDB \list \li \c {/lib/libmariadb.lib} \li \c {/lib/libmariadb.dll} \li \c {/include/mysql.h} \endlist Build the plugin as follows (here it is assumed that the MySQL C Connector is installed in \c{C:/Program Files/MySQL/MySQL Connector C 6.1}): \snippet code/doc_src_sql-driver.qdoc 5 If you are not using a Microsoft compiler, replace \c nmake with \c mingw32-make in the line above. When you distribute your application, remember to include libmysql.dll / libmariadb.dll in your installation package. It must be placed in the same folder as the application executable. \e libmysql.dll additionally needs the MSVC runtime libraries which can be installed with vcredist.exe (\l {https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads}{vcredist.exe} \target QOCI \section2 QOCI for the Oracle Call Interface (OCI) The Qt OCI plugin supports Oracle 9i, 10g and higher. After connecting to the Oracle server, the plugin will auto-detect the database version and enable features accordingly. It's possible to connect to a Oracle database without a tnsnames.ora file. This requires that the database SID is passed to the driver as the database name, and that a hostname is given. \section3 OCI User Authentication The Qt OCI plugin supports authentication using external credentials (OCI_CRED_EXT). Usually, this means that the database server will use the user authentication provided by the operating system instead of its own authentication mechanism. Leave the username and password empty when opening a connection with QSqlDatabase to use the external credentials authentication. \section3 OCI BLOB/LOB Support Binary Large Objects (BLOBs) can be read and written, but be aware that this process may require a lot of memory. You should use a forward only query to select LOB fields (see QSqlQuery::setForwardOnly()). Inserting BLOBs should be done using either a prepared query where the BLOBs are bound to placeholders or QSqlTableModel, which uses a prepared query to do this internally. \section3 How to Build the OCI Plugin on Unix and \macos For Oracle 10g, all you need is the "Instant Client Package - Basic" and "Instant Client Package - SDK". For Oracle prior to 10g, you require the standard Oracle client and the SDK packages. Oracle library files required to build the driver: \list \li \c libclntsh.so (all versions) \li \c libwtc9.so (only Oracle 9) \endlist Tell \c qmake where to find the Oracle header files and shared libraries and run make: For Oracle version 9: \snippet code/doc_src_sql-driver.qdoc 6 For Oracle version 10, we assume that you installed the RPM packages of the Instant Client Package SDK (you need to adjust the version number accordingly): \snippet code/doc_src_sql-driver.qdoc 7 \b{Note:} If you are using the Oracle Instant Client package, you will need to set LD_LIBRARY_PATH when building the OCI SQL plugin, and when running an application that uses the OCI SQL plugin. You can avoid this requirement by setting RPATH, and listing all of the libraries to link to. Here is an example: \snippet code/doc_src_sql-driver.qdoc 32 If you wish to build the OCI plugin manually with this method, the procedure looks like this: \snippet code/doc_src_sql-driver.qdoc 33 \section3 How to Build the OCI Plugin on Windows Choosing the option "Programmer" in the Oracle Client Installer from the Oracle Client Installation CD is generally sufficient to build the plugin. For some versions of Oracle Client, you may also need to select the "Call Interface (OCI)" option if it is available. Build the plugin as follows (here it is assumed that Oracle Client is installed in \c{C:\oracle}): \snippet code/doc_src_sql-driver.qdoc 8 If you are not using a Microsoft compiler, replace \c nmake with \c mingw32-make in the line above. When you run your application, you will also need to add the \c oci.dll path to your \c PATH environment variable: \snippet code/doc_src_sql-driver.qdoc 9 \target QODBC \section2 QODBC for Open Database Connectivity (ODBC) ODBC is a general interface that allows you to connect to multiple DBMSs using a common interface. The QODBC driver allows you to connect to an ODBC driver manager and access the available data sources. Note that you also need to install and configure ODBC drivers for the ODBC driver manager that is installed on your system. The QODBC plugin then allows you to use these data sources in your Qt applications. \b{Note:} You should use the native driver, if it is available, instead of the ODBC driver. ODBC support can be used as a fallback for compliant databases if no native driver is available. On Windows, an ODBC driver manager should be installed by default. For Unix systems, there are some implementations which must be installed first. Note that every end user of your application is required to have an ODBC driver manager installed, otherwise the QODBC plugin will not work. When connecting to an ODBC datasource, you should pass the name of the ODBC datasource to the QSqlDatabase::setDatabaseName() function, rather than the actual database name. The QODBC Plugin needs an ODBC compliant driver manager version 2.0 or later. Some ODBC drivers claim to be version-2.0-compliant, but do not offer all the necessary functionality. The QODBC plugin therefore checks whether the data source can be used after a connection has been established, and refuses to work if the check fails. If you do not like this behavior, you can remove the \c{#define ODBC_CHECK_DRIVER} line from the file \c{qsql_odbc.cpp}. Do this at your own risk! By default, Qt instructs the ODBC driver to behave as an ODBC 2.x driver. However, for some \e{driver-manager/ODBC 3.x-driver} combinations (e.g., \e{unixODBC/MaxDB ODBC}), telling the ODBC driver to behave as a 2.x driver can cause the driver plugin to have unexpected behavior. To avoid this problem, instruct the ODBC driver to behave as a 3.x driver by \l{QSqlDatabase::setConnectOptions()} {setting the connect option} \c{"SQL_ATTR_ODBC_VERSION=SQL_OV_ODBC3"} before you \l{QSqlDatabase::open()} {open your database connection}. Note that this will affect multiple aspects of ODBC driver behavior, e.g., the SQLSTATEs. Before setting this connect option, consult your ODBC documentation about behavior differences you can expect. When using the SAP HANA database, the connection has to be established using the option "SCROLLABLERESULT=TRUE", as the HANA ODBC driver does not provide scrollable results by default, e.g.: \snippet code/doc_src_sql-driver.cpp 39 If you experience very slow access of the ODBC datasource, make sure that ODBC call tracing is turned off in the ODBC datasource manager. Some drivers do not support scrollable cursors. In that case, only queries in forwardOnly mode can be used successfully. \section3 ODBC Stored Procedure Support With Microsoft SQL Server the result set returned by a stored procedure that uses the return statement, or returns multiple result sets, will be accessible only if you set the query's forward only mode to \e forward using \l QSqlQuery::setForwardOnly(). \snippet code/doc_src_sql-driver.cpp 10 \b{Note:} The value returned by the stored procedure's return statement is discarded. \section3 ODBC Unicode Support The QODBC Plugin will use the Unicode API if UNICODE is defined. On Windows NT based systems, this is the default. Note that the ODBC driver and the DBMS must also support Unicode. For the Oracle 9 ODBC driver (Windows), it is necessary to check "SQL_WCHAR support" in the ODBC driver manager otherwise Oracle will convert all Unicode strings to local 8-bit. \section3 How to Build the ODBC Plugin on Unix and \macos It is recommended that you use unixODBC. You can find the latest version and ODBC drivers at \l http://www.unixodbc.org. You need the unixODBC header files and shared libraries. Tell \c qmake where to find the unixODBC header files and shared libraries (here it is assumed that unixODBC is installed in \c{/usr/local/unixODBC}) and run \c{make}: \snippet code/doc_src_sql-driver.qdoc 11 \section3 How to Build the ODBC Plugin on Windows The ODBC header and include files should already be installed in the right directories. You just have to build the plugin as follows: \snippet code/doc_src_sql-driver.qdoc 12 If you are not using a Microsoft compiler, replace \c nmake with \c mingw32-make in the line above. \target QPSQL \section2 QPSQL for PostgreSQL (Version 7.3 and Above) The QPSQL driver supports version 7.3 and higher of the PostgreSQL server. For more information about PostgreSQL visit \l http://www.postgresql.org. \section3 QPSQL Unicode Support The QPSQL driver automatically detects whether the PostgreSQL database you are connecting to supports Unicode or not. Unicode is automatically used if the server supports it. Note that the driver only supports the UTF-8 encoding. If your database uses any other encoding, the server must be compiled with Unicode conversion support. Unicode support was introduced in PostgreSQL version 7.1 and it will only work if both the server and the client library have been compiled with multibyte support. More information about how to set up a multibyte enabled PostgreSQL server can be found in the PostgreSQL Administrator Guide, Chapter 5. \section3 QPSQL Case Sensitivity PostgreSQL databases will only respect case sensitivity if the table or field name is quoted when the table is created. So for example, a SQL query such as: \snippet code/doc_src_sql-driver.qdoc 39 will ensure that it can be accessed with the same case that was used. If the table or field name is not quoted when created, the actual table name or field name will be lower-case. When QSqlDatabase::record() or QSqlDatabase::primaryIndex() access a table or field that was unquoted when created, the name passed to the function must be lower-case to ensure it is found. For example: \snippet code/doc_src_sql-driver.qdoc 40 \section3 QPSQL Forward-only query support To use forward-only queries, you must build the QPSQL plugin with PostreSQL client library version 9.2 or later. If the plugin is built with an older version, then forward-only mode will not be available - calling QSqlQuery::setForwardOnly() with \c true will have no effect. \warning If you build the QPSQL plugin with PostgreSQL version 9.2 or later, then you must distribute your application with libpq version 9.2 or later. Otherwise, loading the QPSQL plugin will fail with the following message: \snippet code/doc_src_sql-driver.qdoc 35 While navigating the results in forward-only mode, the handle of QSqlResult may change. Applications that use the low-level handle of SQL result must get a new handle after each call to any of QSqlResult fetch functions. Example: \snippet code/doc_src_sql-driver.cpp 36 While reading the results of a forward-only query with PostgreSQL, the database connection cannot be used to execute other queries. This is a limitation of libpq library. Example: \snippet code/doc_src_sql-driver.cpp 37 This problem will not occur if query1 and query2 use different database connections, or if we execute query2 after the while loop. \note Some methods of QSqlDatabase like tables(), primaryIndex() implicity execute SQL queries, so these also cannot be used while navigating the results of forward-only query. \note QPSQL will print the following warning if it detects a loss of query results: \snippet code/doc_src_sql-driver.qdoc 38 \section3 How to Build the QPSQL Plugin on Unix and \macos You need the PostgreSQL client library and headers installed. To make \c qmake find the PostgreSQL header files and shared libraries, run \c qmake the following way (assuming that the PostgreSQL client is installed in \c{/usr}): \snippet code/doc_src_sql-driver.qdoc 13 \section3 How to Build the QPSQL Plugin on Windows Install the appropriate PostgreSQL developer libraries for your compiler. Assuming that PostgreSQL was installed in \c{C:\psql}, build the plugin as follows: \snippet code/doc_src_sql-driver.qdoc 15 Users of MinGW may wish to consult the following online document: \l{http://www.postgresql.org/docs/current/static/installation-platform-notes.html#INSTALLATION-NOTES-MINGW}{PostgreSQL MinGW/Native Windows}. When you distribute your application, remember to include libpq.dll in your installation package. It must be placed in the same folder as the application executable. \target QTDS \section2 QTDS for Sybase Adaptive Server \note TDS is no longer used by MS Sql Server, and is superseded by \l{QODBC}{ODBC}. QTDS is obsolete from Qt 4.7. It is not possible to set the port with QSqlDatabase::setPort() due to limitations in the Sybase client library. Refer to the Sybase documentation for information on how to set up a Sybase client configuration file to enable connections to databases on non-default ports. \section3 How to Build the QTDS Plugin on Unix and \macos Under Unix, two libraries are available which support the TDS protocol: \list \li FreeTDS, a free implementation of the TDS protocol (\l{http://www.freetds.org}). \li Sybase Open Client, available from \l{https://support.sap.com}. \endlist Regardless of which library you use, the shared object file \c{libsybdb.so} is needed. Set the \c SYBASE environment variable to point to the directory where you installed the client library and execute \c{qmake}: \snippet code/doc_src_sql-driver.qdoc 16 \section3 How to Build the QDTS Plugin on Windows You can either use the DB-Library supplied by Microsoft or the Sybase Open Client (\l{https://support.sap.com}). Configure will try to find NTWDBLIB.LIB to build the plugin: \snippet code/doc_src_sql-driver.qdoc 17 By default, the Microsoft library is used on Windows. If you want to force the use of the Sybase Open Client, you must define \c Q_USE_SYBASE in \c{%QTDIR%\qtbase\src\plugins\sqldrivers\tds\qsql_tds.cpp}. If you are not using a Microsoft compiler, replace \c nmake with \c mingw32-make in the line above. \target QDB2 \section2 QDB2 for IBM DB2 (Version 7.1 and Above) The Qt DB2 plugin makes it possible to access IBM DB2 databases. It has been tested with IBM DB2 v7.1 and 7.2. You must install the IBM DB2 development client library, which contains the header and library files necessary for compiling the QDB2 plugin. The QDB2 driver supports prepared queries, reading/writing of Unicode strings and reading/writing of BLOBs. We suggest using a forward-only query when calling stored procedures in DB2 (see QSqlQuery::setForwardOnly()). \section3 How to Build the QDB2 Plugin on Unix and \macos \snippet code/doc_src_sql-driver.qdoc 18 \section3 How to Build the QDB2 Plugin on Windows The DB2 header and include files should already be installed in the right directories. You just have to build the plugin as follows: \snippet code/doc_src_sql-driver.qdoc 20 If you are not using a Microsoft compiler, replace \c nmake with \c mingw32-make in the line above. \target QSQLITE2 \section2 QSQLITE2 for SQLite Version 2 The Qt SQLite 2 plugin is offered for compatibility. Whenever possible, use the \l{#QSQLITE}{version 3 plugin} instead. The build instructions for version 3 apply to version 2 as well. \target QSQLITE \section2 QSQLITE for SQLite (Version 3 and Above) The Qt SQLite plugin makes it possible to access SQLite databases. SQLite is an in-process database, which means that it is not necessary to have a database server. SQLite operates on a single file, which must be set as the database name when opening a connection. If the file does not exist, SQLite will try to create it. SQLite also supports in-memory and temporary databases. Simply pass respectively ":memory:" or an empty string as the database name. SQLite has some restrictions regarding multiple users and multiple transactions. If you try to read/write on a resource from different transactions, your application might freeze until one transaction commits or rolls back. The Qt SQLite driver will retry to write to a locked resource until it runs into a timeout (see \c{QSQLITE_BUSY_TIMEOUT} at QSqlDatabase::setConnectOptions()). In SQLite any column, with the exception of an INTEGER PRIMARY KEY column, may be used to store any type of value. For instance, a column declared as INTEGER may contain an integer value in one row and a text value in the next. This is due to SQLite associating the type of a value with the value itself rather than with the column it is stored in. A consequence of this is that the type returned by QSqlField::type() only indicates the field's recommended type. No assumption of the actual type should be made from this and the type of the individual values should be checked. The driver is locked for updates while a select is executed. This may cause problems when using QSqlTableModel because Qt's item views fetch data as needed (with QSqlQuery::fetchMore() in the case of QSqlTableModel). You can find information about SQLite on \l{http://www.sqlite.org}. \section3 How to Build the QSQLITE Plugin SQLite version 3 is included as a third-party library within Qt. It can be built by passing the \c{-qt-sqlite} parameter to the configure script. If you do not want to use the SQLite library included with Qt, you can pass \c{-system-sqlite} to the configure script to use the SQLite libraries of the operating system. This is recommended whenever possible, as it reduces the installation size and removes one component for which you need to track security advisories. On Unix and \macos (replace \c $SQLITE with the directory where SQLite resides): \snippet code/doc_src_sql-driver.qdoc 21 On Windows: \snippet code/doc_src_sql-driver.qdoc 23 \section3 Enable REGEXP operator SQLite comes with a REGEXP operation. However the needed implementation must be provided by the user. For convenience a default implementation can be enabled by \l{QSqlDatabase::setConnectOptions()} {setting the connect option} \c{QSQLITE_ENABLE_REGEXP} before \l{QSqlDatabase::open()} {the database connection is opened}. Then a SQL statement like "column REGEXP 'pattern'" basically expands to the Qt code \snippet code/doc_src_sql-driver.cpp 34 For better performance the regular expressions are cached internally. By default the cache size is 25, but it can be changed through the option's value. For example passing "\c{QSQLITE_ENABLE_REGEXP=10}" reduces the cache size to 10. \section3 QSQLITE File Format Compatibility SQLite minor releases sometimes break file format forward compatibility. For example, SQLite 3.3 can read database files created with SQLite 3.2, but databases created with SQLite 3.3 cannot be read by SQLite 3.2. Please refer to the SQLite documentation and change logs for information about file format compatibility between versions. Qt minor releases usually follow the SQLite minor releases, while Qt patch releases follow SQLite patch releases. Patch releases are therefore both backward and forward compatible. To force SQLite to use a specific file format, it is necessary to build and ship your own database plugin with your own SQLite library as illustrated above. Some versions of SQLite can be forced to write a specific file format by setting the \c{SQLITE_DEFAULT_FILE_FORMAT} define when building SQLite. \target QIBASE \section2 QIBASE for Borland InterBase The Qt InterBase plugin makes it possible to access the InterBase and Firebird databases. InterBase can either be used as a client/server or without a server in which case it operates on local files. The database file must exist before a connection can be established. Firebird must be used with a server configuration. Note that InterBase requires you to specify the full path to the database file, no matter whether it is stored locally or on another server. \snippet code/doc_src_sql-driver.cpp 24 You need the InterBase/Firebird development headers and libraries to build this plugin. Due to license incompatibilities with the GPL, users of the Qt Open Source Edition are not allowed to link this plugin to the commercial editions of InterBase. Please use Firebird or the free edition of InterBase. \section3 QIBASE Unicode Support and Text Encoding By default the driver connects to the database using UNICODE_FSS. This can be overridden by setting the ISC_DPB_LC_CTYPE parameter with QSqlDatabase::setConnectOptions() before opening the connection. \snippet code/doc_src_sql-driver.cpp 25 If Qt does not support the given text encoding the driver will issue a warning message and connect to the database using UNICODE_FSS. Note that if the text encoding set when connecting to the database is not the same as in the database, problems with transliteration might arise. \section3 QIBASE Stored procedures InterBase/Firebird return OUT values as result set, so when calling stored procedure, only IN values need to be bound via QSqlQuery::bindValue(). The RETURN/OUT values can be retrieved via QSqlQuery::value(). Example: \snippet code/doc_src_sql-driver.cpp 26 \section3 How to Build the QIBASE Plugin on Unix and \macos The following assumes InterBase or Firebird is installed in \c{/opt/interbase}: If you are using InterBase: \snippet code/doc_src_sql-driver.qdoc 27 If you are using Firebird, the Firebird library has to be set explicitly: \snippet code/doc_src_sql-driver.qdoc 28 \section3 How to Build the QIBASE Plugin on Windows The following assumes InterBase or Firebird is installed in \c{C:\interbase}: If you are using InterBase: \snippet code/doc_src_sql-driver.qdoc 29 If you are using Firebird, the Firebird library has to be set explicitly: \snippet code/doc_src_sql-driver.qdoc 30 If you are not using a Microsoft compiler, replace \c nmake with \c mingw32-make in the line above. Note that \c{C:\interbase\bin} must be in the \c PATH. \target troubleshooting \section1 Troubleshooting You should always use client libraries that have been compiled with the same compiler as you are using for your project. If you cannot get a source distibution to compile the client libraries yourself, you must make sure that the pre-compiled library is compatible with your compiler, otherwise you will get a lot of "undefined symbols" errors. Some compilers have tools to convert libraries, e.g. Borland ships the tool \c{COFF2OMF.EXE} to convert libraries that have been generated with Microsoft Visual C++. If the compilation of a plugin succeeds but it cannot be loaded, make sure that the following requirements are met: \list \li Ensure that the plugin is in the correct directory. You can use QApplication::libraryPaths() to determine where Qt looks for plugins. \li Ensure that the client libraries of the DBMS are available on the system. On Unix, run the command \c{ldd} and pass the name of the plugin as parameter, for example \c{ldd libqsqlmysql.so}. You will get a warning if any of the client libraries could not be found. On Windows, you can use Visual Studio's dependency walker. With Qt Creator, you can update the \c PATH environment variable in the \gui Run section of the \gui Project panel to include the path to the folder containing the client libraries. \li Compile Qt with \c{QT_DEBUG_COMPONENT} defined to get very verbose debug output when loading plugins. \endlist Make sure you have followed the guide to \l{Deploying Plugins}. \target development \section1 How to Write Your Own Database Driver QSqlDatabase is responsible for loading and managing database driver plugins. When a database is added (see QSqlDatabase::addDatabase()), the appropriate driver plugin is loaded (using QSqlDriverPlugin). QSqlDatabase relies on the driver plugin to provide interfaces for QSqlDriver and QSqlResult. QSqlDriver is an abstract base class which defines the functionality of a SQL database driver. This includes functions such as QSqlDriver::open() and QSqlDriver::close(). QSqlDriver is responsible for connecting to a database, establish the proper environment, etc. In addition, QSqlDriver can create QSqlQuery objects appropriate for the particular database API. QSqlDatabase forwards many of its function calls directly to QSqlDriver which provides the concrete implementation. QSqlResult is an abstract base class which defines the functionality of a SQL database query. This includes statements such as \c{SELECT}, \c{UPDATE}, and \c{ALTER} \c{TABLE}. QSqlResult contains functions such as QSqlResult::next() and QSqlResult::value(). QSqlResult is responsible for sending queries to the database, returning result data, etc. QSqlQuery forwards many of its function calls directly to QSqlResult which provides the concrete implementation. QSqlDriver and QSqlResult are closely connected. When implementing a Qt SQL driver, both of these classes must to be subclassed and the abstract virtual methods in each class must be implemented. To implement a Qt SQL driver as a plugin (so that it is recognized and loaded by the Qt library at runtime), the driver must use the Q_PLUGIN_METADATA() macro. Read \l{How to Create Qt Plugins} for more information on this. You can also check out how this is done in the SQL plugins that are provided with Qt in \c{QTDIR/qtbase/src/plugins/sqldrivers}. The following code can be used as a skeleton for a SQL driver: \snippet sqldatabase/sqldatabase.cpp 47 \codeline \snippet sqldatabase/sqldatabase.cpp 48 */