W3C Architecture Domain XML | Member-Confidential!

XML W3C Conformance Test Suite

30 October 2003

This version:
Current Version:
Previous Version:
Test Archive:
W3C XML Core Working Group:
Comments:

Table of Contents

  1. Introduction
  2. Test Matrix
    1. Binary Tests
    2. Output Tests
  3. Test Case Descriptions
    1. Valid Documents
    2. Invalid Documents
    3. Not-WF Documents
    4. Optional Errors
  4. Contributors

1. Introduction

The tests described in this document provide an initial set of metrics to determine how well a particular implementation conforms to the following recommendations: W3C XML 1.0 (Second Edition) Recommendation, Extensible Markup Language (XML) 1.0 (Third Edition), Extensible Markup Language (XML) 1.1 (First Edition), and Namespaces in XML 1.1. The report properly identify the tests associated to each recommendation. All interpretations of these Recommendations are subject to confirmation by the W3C XML Group .

Conformance tests can be used by developers, content creators, and users alike to increase their level of confidence in product quality. In circumstances where interoperability is necessary, these tests can also be used to determine that differing implementations support the same set of features.

The XML Test Suite was transferred from OASIS to W3C and is being augmented to reflect the current work of the W3C XML Core Working Group, This report provides supporting documentation for all the tests included in the test suite. Sources from which these tests have been collected include: James Clark XMLTEST cases, 18-Nov-1998; Fuji Xerox Japanese Text Tests; Sun Microsystems XML Tests; OASIS/NIST TESTS, 1-Nov-1998; IBM XML Tests; Richard Tobin's XML test suite; .

2. Test Matrix

Two basic types of test are presented here. These are respectively Binary Tests and Output Tests .

2.1 Binary Tests

Binary conformance tests are documents which are grouped into one of four categories. Given a document in a given category, each kind of XML parser must treat it consistently and either accept it (a positive test) or reject it (a negative test). It is in that sense that the tests are termed "binary". The XML 1.0 (Second Edition) Recommendation talks in terms of two types of XML processor: validating ones, and nonvalidating ones. There are two differences between these types of processors:

  1. Validating processors check special productions that nonvalidating parsers don't, called validity constraints. (Both must check a basic set of productions, requiring XML documents to be well formed.)
  2. Nonvalidating processors are permitted to not include external entities, such as files with text. Accordingly, they may not report errors which would have been detected had those entities been read.

There are two types of such entity, parameter entities holding definitions which affect validation and other processing; and general entities which hold marked up text. It will be appreciated that there are then five kinds of XML processor: validating processors, and four kinds of nonvalidating processor based on the combinations of external entity which they include.

Basic XML Parsing Test Matrix
Test Document Type v. Parser Type
Nonvalidating Validating
External Entities
Ignored (3 cases)
External Entities
Read
Valid Documents accept accept accept
Invalid Documents accept accept reject
Non-WF Documents reject reject reject
WF Errors tied
to External Entity
accept
(varies)
reject reject
Documents with
Optional Errors
(not specified) (not specified) (not specified)

At this time, the XML community primarily uses parsers which are in the rightmost two columns of this table, calling them Well Formed XML Parsers (or "WF Parsers") and Validating XML Parsers. A second test matrix could be defined to address the variations in the types of of XML processor which do not read all external entities. That additional matrix is not provided here at this time.

2.2 Output Tests

The XML 1.0 (Second Edition) Recommendation places a number of requirements on XML processors, to ensure that they report information to applications as needed. Such requirements are testable. Validating processors are required to report slightly more information than nonvalidating ones, so some tests will require separate output files. Some of the information that must be reported will not be reportable without reading all the external entities in a particular test. Many of the tests for valid documents are paired with an output file as the canonical representation of the input file, to ensure that the XML processor provides the correct information.

3. Test Case Descriptions

This section of this report contains descriptions of test cases, each of which fits into the categories noted above. Each test case includes a document of one of the types in the binary test matrix above (e.g. valid or invalid documents).

In some cases, an output file , as described in Section 2.2, will also be associated with a valid document, which is used for output testing. If such a file exists, it will be noted at the end of the description of the input document.

The description for each test case is presented as a two part table. The right part describes what the test does. This description is intended to have enough detail to evaluate diagnostic messages. The left part includes:

3.1 Valid XML Documents

All conforming XML 1.0 Processors are required to accept valid documents, reporting no errors. In this section of this test report are found descriptions of test cases which fit into this category.

Sections [Rules]:1
Test ID:rmt-ns10-007
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace inequality test: different capitalization

Sections [Rules]:1
Test ID:rmt-ns10-008
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace inequality test: different escaping

Sections [Rules]:2
Test ID:rmt-ns10-001
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace name test: a perfectly good http URI

Sections [Rules]:2
Test ID:rmt-ns10-002
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace name test: a syntactically plausible URI with a fictitious scheme

Sections [Rules]:2
Test ID:rmt-ns10-003
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace name test: a perfectly good http URI with a fragment

Sections [Rules]:2.1
Test ID:ibm-valid-P01-ibm01v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 1

Tests with a xml document consisting of prolog followed by element then Misc

There is an output test associated with this input file.

Sections [Rules]:2.1
Test ID:rmt-ns11-001
RECOMMENDATION:NS1.1
Collection:Richard Tobin's XML Namespaces 1.1 test suite 14 Feb 2003

Namespace name test: a perfectly good http IRI that is not a URI

Sections [Rules]:2.1
Test ID:rmt-ns11-006
RECOMMENDATION:NS1.1
Collection:Richard Tobin's XML Namespaces 1.1 test suite 14 Feb 2003

Test whether non-Latin-1 characters are accepted in IRIs, and whether they are correctly distinguished

Sections [Rules]:2.10
Test ID:valid-sa-084
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that although whitespace can be used to set apart markup for greater readability it is not necessary.

There is an output test associated with this input file.

Sections [Rules]:2.10
Test ID:valid-sa-093
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace is not intended for inclusion in the delivered version of the document.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:valid-sa-116
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that a line break within CDATA will be normalized.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:valid-ext-sa-001
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A combination of carriage return line feed in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:valid-ext-sa-002
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A carriage return (also CRLF) in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:valid-ext-sa-004
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A carriage return (also CRLF) in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:valid-ext-sa-009
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A carriage return (also CRLF) in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The two character sequence #x0D #x85 in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The single character sequence #x85 in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The two character sequence #x0D #x85 in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The single character sequence #x85 in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The two character sequence #x0D #x85 in a document entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The single character sequence #x85 in a document entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v07.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The single character sequence #x2028 in a document entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v08.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The single character sequence #x85 in the XMLDecl must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:ibm-valid-P03-ibm03v09.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 3

The single character sequence #x2028 in the XMLDecl must be normalized to a single newline. (This test is questionable)

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-022
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a NEL character; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-023
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a NEL character; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-024
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an LSEP character; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-025
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an LSEP character; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-026
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has CR-NEL; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-027
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has CR-NEL; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-028
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has CR-LSEP; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1. Note that CR and LSEP are not combined into a single LF

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-029
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has CR-LSEP; legal in both XML 1.0 and 1.1, but different canonical output because of normalization in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-031
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a NEL character in an NMTOKENS attribute; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-033
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an LSEP character in an NMTOKENS attribute; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-047
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a NEL character in element content whitespace; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-049
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

has an LSEP character in element content whitespace; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11, 3.3.3
Test ID:valid-sa-108
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

This tests normalization of end-of-line characters (CRLF) within entities to LF, primarily as an output test.

There is an output test associated with this input file.

Sections [Rules]:2.11, 4.5
Test ID:valid-sa-068
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests definition of an internal entity holding a carriage return character reference, which must not be normalized before reporting to the application. Line break normalization only occurs when parsing external parsed entities.

There is an output test associated with this input file.

Sections [Rules]:2.11 3.2.1 3.2.2 4.2.2 [48] [51] [75]
Test ID:valid-ext-sa-006
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of optional character and content particles within mixed element content. The test also shows the use of an external entity and that a carriage control line feed in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.11 4.2.2 [75]
Test ID:valid-ext-sa-011
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of a public identifier with and external entity. The test also show that a carriage control line feed combination in an external entity must be normalized to a single newline.

There is an output test associated with this input file.

Sections [Rules]:2.12
Test ID:ibm-valid-P33-ibm33v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 33

Tests LanguageID with Langcode - Subcode

There is an output test associated with this input file.

Sections [Rules]:2.12
Test ID:ibm-valid-P34-ibm34v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 34

Duplicate Test as ibm33v01.xml

There is an output test associated with this input file.

Sections [Rules]:2.12
Test ID:ibm-valid-P35-ibm35v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 35

Tests ISO639Code

There is an output test associated with this input file.

Sections [Rules]:2.12
Test ID:ibm-valid-P36-ibm36v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 36

Tests IanaCode

There is an output test associated with this input file.

Sections [Rules]:2.12
Test ID:ibm-valid-P37-ibm37v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 37

Tests UserCode

There is an output test associated with this input file.

Sections [Rules]:2.12
Test ID:ibm-valid-P38-ibm38v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 38

Tests SubCode

There is an output test associated with this input file.

Sections [Rules]:2.12 [35]
Test ID:v-lang01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests a lowercase ISO language code.

There is an output test associated with this input file.

Sections [Rules]:2.12 [35]
Test ID:v-lang02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests a ISO language code with a subcode.

There is an output test associated with this input file.

Sections [Rules]:2.12 [35]
Test ID:v-lang05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests an uppercase ISO language code.

There is an output test associated with this input file.

Sections [Rules]:2.12 [36]
Test ID:v-lang03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests a IANA language code with a subcode.

There is an output test associated with this input file.

Sections [Rules]:2.12 [37]
Test ID:v-lang04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests a user language code with a subcode.

There is an output test associated with this input file.

Sections [Rules]:2.12 [37]
Test ID:v-lang06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests a user language code.

There is an output test associated with this input file.

Sections [Rules]:2.2
Test ID:ibm-valid-P02-ibm02v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

This test case covers legal character ranges plus discrete legal characters for production 02.

Sections [Rules]:2.2
Test ID:ibm-valid-P02-ibm02v01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test case covers legal character ranges plus discrete legal characters for production 02 of the XML1.1 sepcification.

Sections [Rules]:2.2
Test ID:rmt-010
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a C1 control, legal in XML 1.0, illegal in XML 1.1

There is an output test associated with this input file.

Sections [Rules]:2.2
Test ID:rmt-012
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a DEL, legal in XML 1.0, illegal in XML 1.1

There is an output test associated with this input file.

Sections [Rules]:2.2
Test ID:rmt-040
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a C1 control character (partial line up), legal in XML 1.0 but not 1.1

There is an output test associated with this input file.

Sections [Rules]:2.2,4.1
Test ID:ibm-valid-P02-ibm02v02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test case covers control characters x1 to x1F and x7F to x9F which should only appear as character references.

Sections [Rules]:2.2,4.1
Test ID:ibm-valid-P02-ibm02v03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test case covers control characters x1 to x1F and x7F to x9F which appear as character references as an entity's replacement text.

Sections [Rules]:2.2,4.1
Test ID:ibm-valid-P02-ibm02v04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test case contains embeded whitespace characters some form the range 1 - 1F.

Sections [Rules]:2.2,4.1
Test ID:ibm-valid-P02-ibm02v05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test case contains valid char references that match the char production.

Sections [Rules]:2.2,4.1
Test ID:ibm-valid-P02-ibm02v06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test case contains valid char references in the CDATA section, comment and processing instruction of an external entity that match the char production.

Sections [Rules]:2.2 [1]
Test ID:o-p01pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

various Misc items where they can occur

Sections [Rules]:2.2 [2]
Test ID:valid-sa-049
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that characters outside of normal ascii range can be used as element content.

There is an output test associated with this input file.

Sections [Rules]:2.2 [2]
Test ID:valid-sa-050
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that characters outside of normal ascii range can be used as element content.

There is an output test associated with this input file.

Sections [Rules]:2.2 [2]
Test ID:valid-sa-051
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The document is encoded in UTF-16 and uses some name characters well outside of the normal ASCII range.

There is an output test associated with this input file.

Sections [Rules]:2.2 [2]
Test ID:valid-sa-052
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The document is encoded in UTF-8 and the text inside the root element uses two non-ASCII characters, encoded in UTF-8 and each of which expands to a Unicode surrogate pair.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P03-ibm03v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 3

Tests all 4 legal white space characters - #x20 #x9 #xD #xA

Sections [Rules]:2.3
Test ID:ibm-valid-P09-ibm09v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Empty EntityValue is legal

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P09-ibm09v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests a normal EnitityValue

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P09-ibm09v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests EnitityValue referencing a Parameter Entity

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P09-ibm09v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests EnitityValue referencing a General Entity

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P09-ibm09v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests EnitityValue with combination of GE, PE and text, the GE used is declared in the student.dtd

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests empty AttValue with double quotes as the delimiters

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests empty AttValue with single quotes as the delimiters

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Test AttValue with double quotes as the delimiters and single quote inside

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Test AttValue with single quotes as the delimiters and double quote inside

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Test AttValue with a GE reference and double quotes as the delimiters

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Test AttValue with a GE reference and single quotes as the delimiters

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

testing AttValue with mixed references and text content in double quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P10-ibm10v08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

testing AttValue with mixed references and text content in single quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P11-ibm11v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests empty systemliteral using the double quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P11-ibm11v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests empty systemliteral using the single quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P11-ibm11v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests regular systemliteral using the single quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P11-ibm11v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests regular systemliteral using the double quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P12-ibm12v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests empty systemliteral using the double quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P12-ibm12v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests empty systemliteral using the single quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P12-ibm12v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests regular systemliteral using the double quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P12-ibm12v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests regular systemliteral using the single quotes

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P13-ibm13v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 13

Testing PubidChar with all legal PubidChar in a PubidLiteral

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:ibm-valid-P04-ibm04v01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

This test case covers legal NameStartChars character ranges plus discrete legal characters for production 04.

Sections [Rules]:2.3
Test ID:ibm-valid-P04-ibm04av01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

This test case covers legal NameChars character ranges plus discrete legal characters for production 04a.

Sections [Rules]:2.3
Test ID:ibm-valid-P05-ibm05v01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

This test case covers legal Element Names as per production 5.

Sections [Rules]:2.3
Test ID:ibm-valid-P05-ibm05v02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

This test case covers legal PITarget (Names) as per production 5.

Sections [Rules]:2.3
Test ID:ibm-valid-P05-ibm05v03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

This test case covers legal Attribute (Names) as per production 5.

Sections [Rules]:2.3
Test ID:ibm-valid-P05-ibm05v04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

This test case covers legal ID/IDREF (Names) as per production 5.

Sections [Rules]:2.3
Test ID:ibm-valid-P05-ibm05v05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

This test case covers legal ENTITY (Names) as per production 5.

Sections [Rules]:2.3
Test ID:ibm-valid-P047-ibm07v01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 7

This test case covers legal NMTOKEN Name character ranges plus discrete legal characters for production 7.

Sections [Rules]:2.3
Test ID:rmt-ns11-002
RECOMMENDATION:NS1.1
Collection:Richard Tobin's XML Namespaces 1.1 test suite 14 Feb 2003

Namespace inequality test: different escaping of non-ascii letter

Sections [Rules]:2.3
Test ID:rmt-034
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an NMTOKENS attribute containing a CR character that comes from a character reference in an internal entity. Because CR is in the S production, this is valid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-035
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an NMTOKENS attribute containing a CR character that comes from a character reference in an internal entity. Because CR is in the S production, this is valid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-050
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has element content whitespace containing a CR character that comes from a character reference in an internal entity. Because CR is in the S production, this is valid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-051
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has element content whitespace containing a CR character that comes from a character reference in an internal entity. Because CR is in the S production, this is valid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3 [12]
Test ID:valid-sa-100
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Makes sure that PUBLIC identifiers may have some strange characters. NOTE: The XML editors have said that the XML specification errata will specify that parameter entity expansion does not occur in PUBLIC identifiers, so that the '%' character will not flag a malformed parameter entity reference.

There is an output test associated with this input file.

Sections [Rules]:2.3 [12]
Test ID:o-p12pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid public IDs.

Sections [Rules]:2.3 [4]
Test ID:valid-sa-012
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Uses a legal XML 1.0 name consisting of a single colon character (disallowed by the latest XML Namespaces draft).

There is an output test associated with this input file.

Sections [Rules]:2.3 [5]
Test ID:valid-sa-063
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The document is encoded in UTF-8 and the name of the root element type uses non-ASCII characters.

There is an output test associated with this input file.

Sections [Rules]:2.3 [6]
Test ID:o-p06pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

various satisfactions of the Names production in a NAMES attribute

Sections [Rules]:2.3 [7]
Test ID:o-p07pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

various valid Nmtoken 's in an attribute list declaration.

Sections [Rules]:2.3 [8]
Test ID:o-p08pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

various satisfaction of an NMTOKENS attribute value.

Sections [Rules]:2.3 [9]
Test ID:o-p09pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid EntityValue's. Except for entity references, markup is not recognized.

Sections [Rules]:2.3 2.10
Test ID:valid-sa-092
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demostrates that extra whitespace is normalized into a single space character.

There is an output test associated with this input file.

Sections [Rules]:2.3 3.1 [10][40][41]
Test ID:valid-sa-109
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an attribute can have a null value.

There is an output test associated with this input file.

Sections [Rules]:2.3 3.1 [13] [40]
Test ID:valid-sa-013
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that the Attribute in a Start-tag can consist of numerals along with special characters.

There is an output test associated with this input file.

Sections [Rules]:2.3 3.1 [13] [40]
Test ID:valid-sa-014
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that all lower case letters are valid for the Attribute in a Start-tag.

There is an output test associated with this input file.

Sections [Rules]:2.3 3.1 [13] [40]
Test ID:valid-sa-015
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that all upper case letters are valid for the Attribute in a Start-tag.

There is an output test associated with this input file.

Sections [Rules]:2.3 3.1 [43]
Test ID:valid-sa-009
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that PubidChar can be used for element content.

There is an output test associated with this input file.

Sections [Rules]:2.3 4.1 [10] [69]
Test ID:valid-not-sa-023
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of a parameter entity reference within an attribute list declaration.

There is an output test associated with this input file.

Sections [Rules]:2.4
Test ID:ibm-valid-P14-ibm14v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 14

Testing CharData with empty string

There is an output test associated with this input file.

Sections [Rules]:2.4
Test ID:ibm-valid-P14-ibm14v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 14

Testing CharData with white space character

There is an output test associated with this input file.

Sections [Rules]:2.4
Test ID:ibm-valid-P14-ibm14v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 14

Testing CharData with a general text string

There is an output test associated with this input file.

Sections [Rules]:2.4 2.5 2.6 2.7 [15] [16] [18]
Test ID:o-p43pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid use of character data, comments, processing instructions and CDATA sections within the start and end tag.

Sections [Rules]:2.4 3.1 [14] [43]
Test ID:valid-sa-048
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that character data is valid element content.

There is an output test associated with this input file.

Sections [Rules]:2.4 3.1 [43]
Test ID:valid-sa-008
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates character references can be used for element content.

There is an output test associated with this input file.

Sections [Rules]:2.5
Test ID:valid-sa-119
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Comments may contain any legal XML characters; only the string "--" is disallowed.

There is an output test associated with this input file.

Sections [Rules]:2.5
Test ID:ibm-valid-P15-ibm15v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests empty comment

There is an output test associated with this input file.

Sections [Rules]:2.5
Test ID:ibm-valid-P15-ibm15v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment with regular text

There is an output test associated with this input file.

Sections [Rules]:2.5
Test ID:ibm-valid-P15-ibm15v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment with one dash inside

There is an output test associated with this input file.

Sections [Rules]:2.5
Test ID:ibm-valid-P15-ibm15v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment with more comprehensive content

There is an output test associated with this input file.

Sections [Rules]:2.5 [15]
Test ID:dtd01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Comments don't get parameter entity expansion

There is an output test associated with this input file.

Sections [Rules]:2.5 3.1 [15] [43]
Test ID:valid-sa-021
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that comments are valid element content.

There is an output test associated with this input file.

Sections [Rules]:2.5 3.1 [15] [43]
Test ID:valid-sa-022
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that comments are valid element content and that all characters before the double-hypen right angle combination are considered part of thecomment.

There is an output test associated with this input file.

Sections [Rules]:2.6
Test ID:ibm-valid-P16-ibm16v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI definition with only PItarget name and nothing else

There is an output test associated with this input file.

Sections [Rules]:2.6
Test ID:ibm-valid-P16-ibm16v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI definition with only PItarget name and a white space

There is an output test associated with this input file.

Sections [Rules]:2.6
Test ID:ibm-valid-P16-ibm16v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI definition with PItarget name and text that contains question mark and right angle

There is an output test associated with this input file.

Sections [Rules]:2.6
Test ID:ibm-valid-P17-ibm17v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 17

Tests PITarget name

There is an output test associated with this input file.

Sections [Rules]:2.6 [15]
Test ID:valid-sa-037
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid comment and that it may appear anywhere in the document including at the end.

There is an output test associated with this input file.

Sections [Rules]:2.6 [15]
Test ID:valid-sa-038
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid comment and that it may appear anywhere in the document including the beginning.

There is an output test associated with this input file.

Sections [Rules]:2.6 [16]
Test ID:valid-sa-036
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid processing instruction.

There is an output test associated with this input file.

Sections [Rules]:2.6 [16]
Test ID:valid-sa-039
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid processing instruction and that it may appear at the beginning of the document.

There is an output test associated with this input file.

Sections [Rules]:2.6 2.10 [16]
Test ID:valid-sa-055
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace within a processing instruction willnormalized into s single space character.

There is an output test associated with this input file.

Sections [Rules]:2.6 2.10 [16]
Test ID:valid-sa-098
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace within a processing instruction is converted into a single space character.

There is an output test associated with this input file.

Sections [Rules]:2.6 3.1 [16] [43]
Test ID:valid-sa-016
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that Processing Instructions are valid element content.

There is an output test associated with this input file.

Sections [Rules]:2.6 3.1 [16] [43]
Test ID:valid-sa-017
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that Processing Instructions are valid element content and there can be more than one.

There is an output test associated with this input file.

Sections [Rules]:2.7
Test ID:valid-not-sa-031
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Expands a general entity which contains a CDATA section with what looks like a markup declaration (but is just text since it's in a CDATA section).

There is an output test associated with this input file.

Sections [Rules]:2.7
Test ID:ibm-valid-P18-ibm18v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 18

Tests CDSect with CDStart CData CDEnd

There is an output test associated with this input file.

Sections [Rules]:2.7
Test ID:ibm-valid-P19-ibm19v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 19

Tests CDStart

There is an output test associated with this input file.

Sections [Rules]:2.7
Test ID:ibm-valid-P20-ibm20v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 20

Tests CDATA with empty string

There is an output test associated with this input file.

Sections [Rules]:2.7
Test ID:ibm-valid-P20-ibm20v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 20

Tests CDATA with regular content

There is an output test associated with this input file.

Sections [Rules]:2.7
Test ID:ibm-valid-P21-ibm21v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 21

Tests CDEnd

There is an output test associated with this input file.

Sections [Rules]:2.7 [20]
Test ID:valid-sa-114
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that all text within a valid CDATA section is considered text and not recognized as markup.

There is an output test associated with this input file.

Sections [Rules]:2.7 3.1 [18] [43]
Test ID:valid-sa-018
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that CDATA sections are valid element content.

There is an output test associated with this input file.

Sections [Rules]:2.7 3.1 [18] [43]
Test ID:valid-sa-019
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that CDATA sections are valid element content and that ampersands may occur in their literal form.

There is an output test associated with this input file.

Sections [Rules]:2.7 3.1 [18] [43]
Test ID:valid-sa-020
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstractes that CDATA sections are valid element content and that everyting between the CDStart and CDEnd is recognized as character data not markup.

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:valid-sa-094
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute defaults with a DTD have special parsing rules, different from other strings. That means that characters found there may look like an undefined parameter entity reference "within a markup declaration", but they aren't ... so they can't be violating the PEs in Internal Subset WFC.

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:pe01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Parameter entities references are NOT RECOGNIZED in default attribute values.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with XMLDecl and doctypedecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with doctypedecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with Misc doctypedecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with doctypedecl Misc

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with XMLDecl Misc doctypedecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with XMLDecl doctypedecl Misc

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P22-ibm22v07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with XMLDecl Misc doctypedecl Misc

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P23-ibm23v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with VersionInfo only

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P23-ibm23v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with VersionInfo EncodingDecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P23-ibm23v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with VersionInfo SDDecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P23-ibm23v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with VerstionInfo and a trailing whitespace char

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P23-ibm23v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with VersionInfo EncodingDecl SDDecl

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P23-ibm23v06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with VersionInfo EncodingDecl SDDecl and a trailing whitespace

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P24-ibm24v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with single quote

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P24-ibm24v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with double quote

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P25-ibm25v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 25

Tests EQ with =

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P25-ibm25v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 25

Tests EQ with = and spaces on both sides

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P25-ibm25v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 25

Tests EQ with = and space in front of it

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P25-ibm25v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 25

Tests EQ with = and space after it

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P26-ibm26v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 26

Tests VersionNum 1.0

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P27-ibm27v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 27

Tests Misc with comment

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P27-ibm27v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 27

Tests Misc with PI

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P27-ibm27v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 27

Tests Misc with white spaces

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P28-ibm28v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with internal DTD only

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P28-ibm28v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with external subset and combinations of different markup declarations and PEReferences

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P29-ibm29v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests markupdecl with combinations of elementdecl, AttlistDecl,EntityDecl, NotationDecl, PI and comment

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P29-ibm29v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC: PE in internal subset as a positive test

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P30-ibm30v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 30

Tests extSubset with extSubsetDecl only in the dtd file

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P30-ibm30v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 30

Tests extSubset with TextDecl and extSubsetDecl in the dtd file

There is an output test associated with this input file.

Sections [Rules]:2.8
Test ID:ibm-valid-P31-ibm31v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 31

Tests extSubsetDecl with combinations of markupdecls, conditionalSects, PEReferences and white spaces

There is an output test associated with this input file.

Sections [Rules]:2.8, 4.1 [69]
Test ID:valid-not-sa-024
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Constructs an <!ATTLIST...> declaration from several PEs.

There is an output test associated with this input file.

Sections [Rules]:2.8 [22]
Test ID:o-p22pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

XML decl and doctypedecl

Sections [Rules]:2.8 [22]
Test ID:o-p22pass5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

just doctypedecl

Sections [Rules]:2.8 [22]
Test ID:o-p22pass6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S between decls is not required

Sections [Rules]:2.8 [23]
Test ID:valid-sa-033
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that both a EncodingDecl and SDDecl are valid within the prolog.

There is an output test associated with this input file.

Sections [Rules]:2.8 [24]
Test ID:valid-sa-028
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid prolog that uses double quotes as delimeters around the VersionNum.

There is an output test associated with this input file.

Sections [Rules]:2.8 [24]
Test ID:valid-sa-029
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid prolog that uses single quotes as delimters around the VersionNum.

There is an output test associated with this input file.

Sections [Rules]:2.8 [25]
Test ID:valid-sa-030
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid prolog that contains whitespace on both sides of the equal sign in the VersionInfo.

There is an output test associated with this input file.

Sections [Rules]:2.8 [29]
Test ID:o-p29pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid types of markupdecl.

Sections [Rules]:2.8 [31]
Test ID:o-p31pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

external subset can be empty

Sections [Rules]:2.8 3.4 4.2.2 [31] [62] [63] [75]
Test ID:o-p31pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid doctypedecl with EXternalID as Enternal Entity. The external entity contains a parameter entity reference and condtional sections.

Sections [Rules]:2.8 4.1 [28] [69]
Test ID:o-p28pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid doctypedecl with Parameter entity reference. The declaration of a parameter entity must precede any reference to it.

Sections [Rules]:2.8 4.1 [28] [69]
Test ID:o-p28pass5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid doctypedecl with ExternalID as an External Entity. A parameter entity reference is also used.

Sections [Rules]:2.8 4.2.2 [28] [75]
Test ID:o-p28pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid doctypedecl with ExternalID as an External Entity declaration.

Sections [Rules]:2.8 4.2.2 [30] [75]
Test ID:o-p30pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid doctypedecl with ExternalID as an External Entity. The external entity has an element declaration.

Sections [Rules]:2.8 4.2.2 4.3.1 [30] [75] [77]
Test ID:o-p30pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid doctypedecl with ExternalID as an Enternal Entity. The external entity begins with a Text Declaration.

Sections [Rules]:2.8 4.3.4
Test ID:rmt-006
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Second-level external general entity has later version number than first-level, but not later than document, so not an error.

There is an output test associated with this input file.

Sections [Rules]:2.8 4.3.4
Test ID:rmt-007
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

A vanilla XML 1.1 document

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:not-sa01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A non-standalone document is valid if declared as such.

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:not-sa02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A non-standalone document is valid if declared as such.

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:not-sa03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A non-standalone document is valid if declared as such.

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:not-sa04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A non-standalone document is valid if declared as such.

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:ibm-valid-P32-ibm32v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests VC: Standalone Document Declaration with absent attribute that has default value and standalone is no

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:ibm-valid-P32-ibm32v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests VC: Standalone Document Declaration with external entity reference and standalone is no

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:ibm-valid-P32-ibm32v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests VC: Standalone Document Declaration with attribute values that need to be normalized and standalone is no

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:ibm-valid-P32-ibm32v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests VC: Standalone Document Declaration with whitespace in mixed content and standalone is no

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:valid-sa-032
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid SDDecl within the prolog.

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:sa01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A document may be marked 'standalone' if any optional whitespace is defined within the internal DTD subset.

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:sa02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A document may be marked 'standalone' if any attributes that need normalization are defined within the internal DTD subset.

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:sa03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

A document may be marked 'standalone' if any the defined entities need expanding are internal, and no attributes need defaulting or normalization. On output, requires notations to be correctly reported.

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:sa04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Like sa03 but relies on attribute defaulting defined in the internal subset. On output, requires notations to be correctly reported.

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:sa05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Like sa01 but this document is standalone since it has no optional whitespace. On output, requires notations to be correctly reported.

There is an output test associated with this input file.

Sections [Rules]:3
Test ID:element
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests clauses 1, 3, and 4 of the Element Valid validity constraint.

There is an output test associated with this input file.

Sections [Rules]:3
Test ID:ibm-valid-P39-ibm39v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with EmptyElemTag and STag content Etag, also tests the VC: Element Valid with elements that have children, Mixed and ANY contents

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-valid-P40-ibm40v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 40

Tests STag with possible combinations of its fields, also tests WFC: Unique Att Spec.

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-valid-P41-ibm41v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with Name Eq AttValue and VC: Attribute Value Type

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-valid-P42-ibm42v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 42

Tests ETag with possible combinations of its fields

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-valid-P43-ibm43v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 43

Tests content with all possible constructs: element, CharData, Reference, CDSect, Comment

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-valid-P44-ibm44v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 44

Tests EmptyElemTag with possible combinations of its fields

There is an output test associated with this input file.

Sections [Rules]:3.1 [40]
Test ID:valid-sa-002
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that whitespace is permitted after the tag name in a Start-tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [40]
Test ID:valid-sa-005
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid attribute specification within a Start-tag that contains whitespace on both sides of the equal sign.

There is an output test associated with this input file.

Sections [Rules]:3.1 [40]
Test ID:valid-sa-010
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that whitespace is valid after the Attribute in a Start-tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [40]
Test ID:valid-sa-011
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates mutliple Attibutes within the Start-tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [40]
Test ID:valid-sa-104
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace within an Attribute of a Start-tag is normalized to a single space character.

There is an output test associated with this input file.

Sections [Rules]:3.1 [40] [42]
Test ID:valid-sa-054
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace within Start-tags and End-tags are nomalized into single spaces.

There is an output test associated with this input file.

Sections [Rules]:3.1 [41]
Test ID:valid-sa-004
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid attribute specification within a Start-tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [41]
Test ID:valid-sa-006
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that the AttValue within a Start-tag can use a single quote as a delimter.

There is an output test associated with this input file.

Sections [Rules]:3.1 [42]
Test ID:valid-sa-003
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that whitespace is permitted after the tag name in an End-tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [43]
Test ID:valid-sa-023
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that Entity References are valid element content.

There is an output test associated with this input file.

Sections [Rules]:3.1 [43]
Test ID:valid-sa-047
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace is normalized into single space character.

There is an output test associated with this input file.

Sections [Rules]:3.1 [43] [44]
Test ID:o-p28pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Empty-element tag must be used for element which are declared EMPTY.

Sections [Rules]:3.1 [44]
Test ID:valid-sa-034
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the correct syntax for an Empty element tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [44]
Test ID:valid-sa-035
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that whitespace is permissible after the name in an Empty element tag.

There is an output test associated with this input file.

Sections [Rules]:3.1 [44]
Test ID:valid-sa-044
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that the empty-element tag must be use for an elements that are declared EMPTY.

There is an output test associated with this input file.

Sections [Rules]:3.1 4.1 [43] [66]
Test ID:valid-sa-024
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that Entity References are valid element content and also demonstrates a valid Entity Declaration.

There is an output test associated with this input file.

Sections [Rules]:3.1 4.1 [43] [68]
Test ID:valid-ext-sa-003
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that the content of an element can be empty. In this case the external entity is an empty file.

There is an output test associated with this input file.

Sections [Rules]:3.1 4.6 [43]
Test ID:valid-sa-007
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates numeric character references can be used for element content.

There is an output test associated with this input file.

Sections [Rules]:3.2
Test ID:ibm-valid-P45-ibm45v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests both P45 elementDecl and P46 contentspec with possible combinations of their constructs

There is an output test associated with this input file.

Sections [Rules]:3.2.1
Test ID:ibm-valid-P47-ibm47v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests all possible children,cp,choice,seq patterns in P47,P48,P49,P50

There is an output test associated with this input file.

Sections [Rules]:3.2.1
Test ID:ibm-valid-P49-ibm49v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests VC:Proper Group/PE Nesting with PEs of choices that are properly nested with parenthesized groups in external subsets

There is an output test associated with this input file.

Sections [Rules]:3.2.1
Test ID:ibm-valid-P50-ibm50v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests VC:Proper Group/PE Nesting with PEs of seq that are properly nested with parenthesized groups in external subsets

There is an output test associated with this input file.

Sections [Rules]:3.2.1 [47]
Test ID:valid-sa-057
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an element content model whose element can occur zero or more times.

There is an output test associated with this input file.

Sections [Rules]:3.2.1 [48][49]
Test ID:valid-sa-112
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates shows the use of content particles within the element content.

There is an output test associated with this input file.

Sections [Rules]:3.2.1 [50]
Test ID:valid-sa-081
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the optional character following a name or list to govern the number of times an element or content particles in the list occur.

There is an output test associated with this input file.

Sections [Rules]:3.2.1 4.2.2 [48] [75]
Test ID:valid-ext-sa-005
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of optional character and content particles within an element content. The test also show the use of external entity.

There is an output test associated with this input file.

Sections [Rules]:3.2.2
Test ID:ibm-valid-P51-ibm51v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with possible combinations of its fields amd VC: No Duplicate Types

There is an output test associated with this input file.

Sections [Rules]:3.2.2
Test ID:ibm-valid-P51-ibm51v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests VC:Proper Group/PE Nesting with PEs of Mixed that are properly nested with parenthesized groups in external subsets

There is an output test associated with this input file.

Sections [Rules]:3.2.2 [51]
Test ID:valid-sa-001
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Element Type Declaration with Mixed Content.

There is an output test associated with this input file.

Sections [Rules]:3.2.2 [51]
Test ID:dtd00
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests parsing of alternative forms of text-only mixed content declaration.

There is an output test associated with this input file.

Sections [Rules]:3.2.2 [51]
Test ID:o-p51pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid Mixed contentspec's.

Sections [Rules]:3.2 [45]
Test ID:o-p45pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid element declarations

Sections [Rules]:3.2 [46]
Test ID:valid-sa-025
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Element Type Declaration and that the contentspec can be of mixed content.

There is an output test associated with this input file.

Sections [Rules]:3.2 [46]
Test ID:valid-sa-026
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Element Type Declaration and that EMPTY is a valid contentspec.

There is an output test associated with this input file.

Sections [Rules]:3.2 [46]
Test ID:valid-sa-027
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Element Type Declaration and that ANY is a valid contenspec.

There is an output test associated with this input file.

Sections [Rules]:3.2 3.2.1 [45] [46] [47]
Test ID:o-p48pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid use of contentspec, element content models, choices, sequences and content particles within an element type declaration. The optional character following a name or list governs the number of times the element or content particle may appear.

Sections [Rules]:3.2 3.2.1 [45] [46] [47]
Test ID:o-p49pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid use of contentspec, element content models, choices, and content particles within an element type declaration. The optional character following a name or list governs the number of times the element or content particle may appear. Whitespace is also valid between choices.

Sections [Rules]:3.2 3.2.1 [45] [46] [47]
Test ID:o-p50pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid use of contentspec, element content models, sequences and content particles within an element type declaration. The optional character following a name or list governs the number of times the element or content particle may appear. Whitespace is also valid between sequences.

Sections [Rules]:3.2 3.2.1 [45] [46] [47]
Test ID:o-p47pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid use of contentspec, element content models, choices, sequences and content particles within an element type declaration. The optional character following a name or list governs the number of times the element or content particle may appear.

Sections [Rules]:3.2 3.2.1 3.2.2 [45] [46] [47] [51]
Test ID:o-p46pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid use of contentspec, element content models, and mixed content within an element type declaration.

Sections [Rules]:3.2 3.3 [46] [53]
Test ID:valid-sa-059
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Element Type Declaration that uses the contentspec of EMPTY. The element cannot have any contents and must always appear as an empty element in the document. The test also shows an Attribute-list declaration with multiple AttDef's.

There is an output test associated with this input file.

Sections [Rules]:3.3
Test ID:valid-sa-043
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

An element's attributes may be declared before its content model; and attribute values may contain newlines.

There is an output test associated with this input file.

Sections [Rules]:3.3
Test ID:valid-sa-097
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Basically an output test, this tests whether an externally defined attribute declaration (with a default) takes proper precedence over a subsequent internal declaration.

There is an output test associated with this input file.

Sections [Rules]:3.3
Test ID:ibm-valid-P52-ibm52v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests all AttlistDecl and AttDef Patterns in P52 and P53

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:valid-sa-076
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Verifies that an XML parser will parse a NOTATION attribute; the output phase of this test ensures that both notations are reported to the application.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:valid-sa-090
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Verifies that an XML parser will parse a NOTATION attribute; the output phase of this test ensures that the notation is reported to the application.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:valid-sa-091
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Verifies that an XML parser will parse an ENTITY attribute; the output phase of this test ensures that the notation is reported to the application, and for validating parsers it further tests that the entity is so reported.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P54-ibm54v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 54

Tests all AttTypes : StringType, TokenizedTypes, EnumeratedTypes in P55,P56,P57,P58,P59. Also tests all DefaultDecls in P60.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P54-ibm54v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 54

Tests all AttTypes : StringType, TokenizedType, EnumeratedTypes in P55,P56,P57.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P54-ibm54v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 54

Tests AttTypes with StringType in P55.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P55-ibm55v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 55

Tests StringType for P55. The "CDATA" occurs in the StringType for the attribute "att" for the element "a".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56. The "ID", "IDREF", "IDREFS", "ENTITY", "ENTITIES", "NMTOKEN", and "NMTOKENS" occur in the TokenizedType for the attribute "attr".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: ID Attribute Default. The value "AC1999" is assigned to the ID attribute "attr" with "#REQUIRED" in the DeaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: ID Attribute Default. The value "AC1999" is assigned to the ID attribute "attr" with "#IMPLIED" in the DeaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: ID. The ID attribute "UniqueName" appears only once in the document.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: One ID per element type. The element "a" or "b" has only one ID attribute.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: IDREF. The IDREF value "AC456" matches the value assigned to an ID attribute "UniqueName".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: IDREF. The IDREFS value "AC456 Q123" matches the values assigned to the ID attribute "UniqueName" and "Uname".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: Entity Name. The value "image" of the ENTITY attribute "sun" matches the name of an unparsed entity declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: Name Token. The value of the NMTOKEN attribute "thistoken" matches the Nmtoken production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P56-ibm56v10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType for P56 VC: Name Token. The value of the NMTOKENS attribute "thistoken" matches the Nmtoken production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P57-ibm57v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 57

Tests EnumeratedType in the AttType. The attribute "att" has a type (a|b) with the element "a". the

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P58-ibm58v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType for P58. It shows different patterns fro the NOTATION attribute "attr".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P58-ibm58v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType for P58: Notation Attributes. The value "base64" of the NOTATION attribute "attr" matches one of the notation names declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P59-ibm59v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration in the EnumeratedType for P59. It shows different patterns for the Enumeration attribute "attr".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-valid-P59-ibm59v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration for P59 VC: Enumeration. The value "one" of the Enumeration attribute "attr" matches one of the element names declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1 [54]
Test ID:o-p54pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

the three kinds of attribute types

Sections [Rules]:3.3.1 [55]
Test ID:o-p55pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

StringType = "CDATA"

Sections [Rules]:3.3.1 [56]
Test ID:o-p56pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

the 7 tokenized attribute types

Sections [Rules]:3.3.1 [57]
Test ID:o-p57pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

enumerated types are NMTOKEN or NOTATION lists

Sections [Rules]:3.3.1 [58]
Test ID:o-p58pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

NOTATION enumeration has on or more items

Sections [Rules]:3.3.1 [59]
Test ID:v-sgml01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

XML permits token reuse, while SGML does not.

There is an output test associated with this input file.

Sections [Rules]:3.3.1 [59]
Test ID:o-p59pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

NMTOKEN enumerations haveon or more items

Sections [Rules]:3.3.1 4.1 [54] [66]
Test ID:valid-sa-041
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Attribute List declaration that uses a StringType as the AttType and also expands the CDATA attribute with a character reference.

There is an output test associated with this input file.

Sections [Rules]:3.3.1 4.1 [54] [66]
Test ID:valid-sa-042
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Attribute List declaration that uses a StringType as the AttType and also expands the CDATA attribute with a character reference. The test also shows that the leading zeros in the character reference are ignored.

There is an output test associated with this input file.

Sections [Rules]:3.3.1 4.1 [54] [66]
Test ID:valid-sa-056
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Attribute List declaration that uses a StringType as the AttType and also expands the CDATA attribute with a character reference. The test also shows that the leading zeros in the character reference are ignored.

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-valid-P60-ibm60v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl for P60. It shows different options "#REQUIRED", "#FIXED", "#IMPLIED", and default for the attribute "chapter".

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-valid-P60-ibm60v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl for P60 VC: Required Attribute. In the element "one" and "two" the value of the #REQUIRED attribute "chapter" is given.

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-valid-P60-ibm60v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl for P60 VC: Fixed Attribute Default. The value of the #FIXED attribute "chapter" is exactly the same as the default value.

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-valid-P60-ibm60v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl for P60 VC: Attribute Default Legal. The default value specified for the attribute "attr" meets the lexical constraints of the declared attribute type.

There is an output test associated with this input file.

Sections [Rules]:3.3.2 [60]
Test ID:required00
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the #REQUIRED attribute declaration syntax, and the associated validity constraint.

There is an output test associated with this input file.

Sections [Rules]:3.3.2 [60]
Test ID:o-p60pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

the four types of default values

Sections [Rules]:3.3.3
Test ID:valid-sa-058
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace be normalized into a single space character in an attribute of type NMTOKENS.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-095
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Basically an output test, this requires extra whitespace to be normalized into a single space character in an attribute of type NMTOKENS.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-096
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that extra whitespace is normalized into a single space character in an attribute of type NMTOKENS.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-102
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that a CDATA attribute can pass a double quote as its value.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-103
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an attribute can pass a less than sign as its value.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-105
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Basically an output test, this requires a CDATA attribute with a tab character to be passed through as one space.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-106
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Basically an output test, this requires a CDATA attribute with a newline character to be passed through as one space.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-107
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Basically an output test, this requires a CDATA attribute with a return character to be passed through as one space.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-110
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Basically an output test, this requires that a CDATA attribute with a CRLF be normalized to one space.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-111
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character references expanding to spaces doesn't affect treatment of attributes.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-sa-115
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an entity reference is processed by recursively processing the replacement text of the entity.

There is an output test associated with this input file.

Sections [Rules]:3.3.3
Test ID:valid-ext-sa-013
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that whitespace is handled by adding a single whitespace to the normalized value in the attribute list.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:valid-sa-045
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests whether more than one definition can be provided for the same attribute of a given element type with the first declaration being binding.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:valid-sa-046
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that when more than one AttlistDecl is provided for a given element type, the contents of all those provided are merged.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:valid-not-sa-006
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that when more than one definition is provided for the same attribute of a given element type only the first declaration is binding.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:valid-not-sa-007
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of an Attribute list declaration within an external entity.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:valid-not-sa-010
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that when more that one definition is provided for the same attribute of a given element type only the first declaration is binding.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:valid-not-sa-026
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that when more that one definition is provided for the same attribute of a given element type only the first declaration is binding.

There is an output test associated with this input file.

Sections [Rules]:3.3 [52]
Test ID:o-p52pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid AttlistDecls: No AttDef's are required, and the terminating S is optional, multiple ATTLISTS per element are OK, and multiple declarations of the same attribute are OK.

Sections [Rules]:3.3 [52][53]
Test ID:valid-sa-113
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that it is not an error to have attributes declared for an element not itself declared.

There is an output test associated with this input file.

Sections [Rules]:3.3 [53]
Test ID:o-p53pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a valid AttDef

Sections [Rules]:3.3 3.3.1 [52] [54]
Test ID:valid-sa-040
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an Attribute List declaration that uses a StringType as the AttType.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [54]
Test ID:valid-sa-077
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use an EnumeratedType within the Attribute type. The test also shows that IMPLIED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [54]
Test ID:valid-sa-078
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use an StringType of CDATA within the Attribute type. The test also shows that REQUIRED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [56]
Test ID:valid-sa-071
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use ID as the TokenizedType within the Attribute type. The test also shows that IMPLIED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [56]
Test ID:valid-sa-072
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use IDREF as the TokenizedType within the Attribute type. The test also shows that IMPLIED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [56]
Test ID:valid-sa-073
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use IDREFS as the TokenizedType within the Attribute type. The test also shows that IMPLIED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [56]
Test ID:valid-sa-074
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use ENTITY as the TokenizedType within the Attribute type. The test also shows that IMPLIED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.1 [52] [56]
Test ID:valid-sa-075
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use ENTITIES as the TokenizedType within the Attribute type. The test also shows that IMPLIED is a valid DefaultDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.2 [52] [60]
Test ID:valid-sa-079
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use an StringType of CDATA within the Attribute type. The test also shows that FIXED is a valid DefaultDecl and that a value can be given to the attribute in the Start-tag as well as the AttListDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3 3.3.2 [52] [60]
Test ID:valid-sa-080
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an AttlistDecl can use an StringType of CDATA within the Attribute type. The test also shows that FIXED is a valid DefaultDecl and that an value can be given to the attribute.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P61-ibm61v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 61

Tests conditionalSect for P61. It takes the option "invludeSect" in the file ibm61v01.dtd.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P61-ibm61v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 61

Tests conditionalSect for P61. It takes the option "ignoreSect" in the file ibm61v02.dtd.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P62-ibm62v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect for P62. The white space is not included before the key word "INCLUDE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P62-ibm62v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect for P62. The white space is not included after the key word "INCLUDE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P62-ibm62v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect for P62. The white space is included after the key word "INCLUDE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P62-ibm62v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect for P62. The white space is included before the key word "INCLUDE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P62-ibm62v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect for P62. The extSubsetDecl is not included.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P63-ibm63v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect for P63. The white space is not included before the key word "IGNORE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P63-ibm63v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect for P63. The white space is not included after the key word "IGNORE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P63-ibm63v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect for P63. The white space is included after the key word "IGNORE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P63-ibm63v04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect for P63. The ignireSectContents is included.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P63-ibm63v05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect for P63. The white space is included before and after the key word "IGNORE" in the beginning sequence.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P64-ibm64v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 64

Tests ignoreSectContents for P64. One "ignore" field is included.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P64-ibm64v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 64

Tests ignoreSectContents for P64. Two "ignore" and one "ignoreSectContents" fields are included.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P64-ibm64v03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 64

Tests ignoreSectContents for P64. Four "ignore" and three "ignoreSectContents" fields are included.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P65-ibm65v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 65

Tests Ignore for P65. An empty string occurs in the Ignore filed.

There is an output test associated with this input file.

Sections [Rules]:3.4
Test ID:ibm-valid-P65-ibm65v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 65

Tests Ignore for P65. An string not including the brackets occurs in each of the Ignore filed.

There is an output test associated with this input file.

Sections [Rules]:3.4 [61]
Test ID:o-p61pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid conditional sections are INCLUDE and IGNORE

Sections [Rules]:3.4 [62]
Test ID:valid-not-sa-013
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditional section INCLUDE that will include its contents as part of the DTD.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:valid-not-sa-014
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditional section INCLUDE that will include its contents as part of the DTD. The keyword is a parameter-entity reference.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:valid-not-sa-016
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditional section INCLUDE that will include its contents as part of the DTD. The keyword is a parameter-entity reference.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:valid-not-sa-028
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditional section INCLUDE that will include its contents.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:valid-not-sa-029
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditonal section IGNORE the will ignore its content from being used.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:valid-not-sa-030
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditonal section IGNORE the will ignore its content from being used.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:o-p62pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid INCLUDE sections -- options S before and after keyword, sections can nest

Sections [Rules]:3.4 [63]
Test ID:valid-not-sa-015
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of the conditonal section IGNORE the will ignore its content from being part of the DTD. The keyword is a parameter-entity reference.

There is an output test associated with this input file.

Sections [Rules]:3.4 [63]
Test ID:o-p63pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid IGNORE sections

Sections [Rules]:3.4 [64]
Test ID:o-p64pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

IGNOREd sections ignore everything except section delimiters

Sections [Rules]:3 3.2.1 [47]
Test ID:optional
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests declarations of "children" content models, and the validity constraints associated with them.

There is an output test associated with this input file.

Sections [Rules]:4
Test ID:valid-sa-085
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Parameter and General entities use different namespaces, so there can be an entity of each type with a given name.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-valid-P66-ibm66v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests all legal CharRef's.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-valid-P67-ibm67v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 67

Tests Reference could be EntityRef or CharRef.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-valid-P68-ibm68v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests P68 VC:Entity Declared with Entities in External Subset , standalone is no

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-valid-P68-ibm68v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests P68 VC:Entity Declared with Entities in External Parameter Entities , standalone is no

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-valid-P69-ibm69v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests P68 VC:Entity Declared with Parameter Entities in External Subset , standalone is no

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-valid-P69-ibm69v02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests P68 VC:Entity Declared with Parameter Entities in External Parameter Entities, standalone is no

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:rmt-043
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a character reference to a C0 control character (form-feed), legal in XML 1.1 but not 1.0

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:rmt-044
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a character reference to a C1 control character (partial line up), legal in both XML 1.0 and 1.1 (but for different reasons)

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:rmt-045
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a character reference to a C1 control character (partial line up), legal in both XML 1.0 and 1.1 (but for different reasons)

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-060
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of decimal Character References within element content.

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-061
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of decimal Character References within element content.

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-062
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of hexadecimal Character References within element.

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-064
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests in-line handling of two legal character references, which each expand to a Unicode surrogate pair.

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-066
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Expands a CDATA attribute with a character reference.

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-067
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of decimal character references within element content.

There is an output test associated with this input file.

Sections [Rules]:4.1 [66]
Test ID:valid-sa-089
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests entity expansion of three legal character references, which each expand to a Unicode surrogate pair.

There is an output test associated with this input file.

Sections [Rules]:4.1 [68]
Test ID:o-p68pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid entity references. Also ensures that a charref to '&' isn't interpreted as an entity reference open delimiter

Sections [Rules]:4.1 [69]
Test ID:valid-not-sa-003
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the expansion of an external parameter entity that declares an attribute.

There is an output test associated with this input file.

Sections [Rules]:4.1 [69]
Test ID:valid-not-sa-004
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Expands an external parameter entity in two different ways, with one of them declaring an attribute.

There is an output test associated with this input file.

Sections [Rules]:4.1 [69]
Test ID:valid-not-sa-005
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the expansion of an external parameter entity that declares an attribute.

There is an output test associated with this input file.

Sections [Rules]:4.1 [69]
Test ID:valid-not-sa-027
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a parameter entity reference whose value is NULL.

There is an output test associated with this input file.

Sections [Rules]:4.1 [69]
Test ID:o-p69pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid PEReferences.

Sections [Rules]:4.1 4.4.3 [68]
Test ID:valid-ext-sa-014
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates use of characters outside of normal ASCII range.

There is an output test associated with this input file.

Sections [Rules]:4.2
Test ID:valid-sa-086
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests whether entities may be declared more than once, with the first declaration being the binding one.

There is an output test associated with this input file.

Sections [Rules]:4.2
Test ID:valid-not-sa-025
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that when more that one definition is provided for the same entity only the first declaration is binding.

There is an output test associated with this input file.

Sections [Rules]:4.2
Test ID:ibm-valid-P70-ibm70v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 70

Tests all legal GEDecls and PEDecls constructs derived from P70-76

There is an output test associated with this input file.

Sections [Rules]:4.2.1 4.2.2
Test ID:valid-ext-sa-012
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates both internal and external entities and that processing of entity references may be required to produce the correct replacement text.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [75]
Test ID:valid-not-sa-001
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of an ExternalID within a document type definition.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [75]
Test ID:valid-not-sa-002
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of an ExternalID within a document type definition.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [75]
Test ID:valid-not-sa-008
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an external identifier may include a public identifier.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [75]
Test ID:valid-not-sa-009
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that an external identifier may include a public identifier.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [75]
Test ID:valid-not-sa-018
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an EnternalID whose contents contain an parameter entity declaration and a attribute list definition.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [76]
Test ID:o-p76pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid NDataDecls

Sections [Rules]:4.2.2 4.3.3. 4.4.3 [75] [80]
Test ID:valid-ext-sa-008
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of external entity and how replacement text is retrieved and processed. Also tests the use of an EncodingDecl of UTF-16.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 4.4.3 [75]
Test ID:valid-ext-sa-007
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the use of external entity and how replacement text is retrieved and processed.

There is an output test associated with this input file.

Sections [Rules]:4.2 [70]
Test ID:o-p70pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

An EntityDecl is either a GEDecl or a PEDecl

Sections [Rules]:4.2 [71]
Test ID:o-p71pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid GEDecls

Sections [Rules]:4.2 [72]
Test ID:valid-sa-082
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests that an external PE may be defined (but not referenced).

There is an output test associated with this input file.

Sections [Rules]:4.2 [72]
Test ID:valid-sa-083
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests that an external PE may be defined (but not referenced).

There is an output test associated with this input file.

Sections [Rules]:4.2 [72]
Test ID:valid-not-sa-017
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a parameter entity declaration that contains an attribute list declaration.

There is an output test associated with this input file.

Sections [Rules]:4.2 [72]
Test ID:valid-not-sa-021
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a parameter entity declaration that contains a partial attribute list declaration.

There is an output test associated with this input file.

Sections [Rules]:4.2 [72]
Test ID:o-p72pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid PEDecls

Sections [Rules]:4.2 [73]
Test ID:o-p73pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

EntityDef is either Entity value or an external id, with an optional NDataDecl

Sections [Rules]:4.2 4.2.1 [72] [75]
Test ID:valid-not-sa-011
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a parameter entity declaration whose parameter entity definition is an ExternalID.

There is an output test associated with this input file.

Sections [Rules]:4.3.1 [77]
Test ID:valid-not-sa-012
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates an enternal parsed entity that begins with a text declaration.

There is an output test associated with this input file.

Sections [Rules]:4.3.1 4.3.2 [77] [78]
Test ID:ext01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests use of external parsed entities with and without content.

There is an output test associated with this input file.

Sections [Rules]:4.3.2
Test ID:ibm-valid-P78-ibm78v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 78

Tests ExtParsedEnt, also TextDecl in P77 and EncodingDecl in P80

There is an output test associated with this input file.

Sections [Rules]:4.3.2
Test ID:ibm-valid-P79-ibm79v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 79

Tests extPE

Sections [Rules]:4.3.2
Test ID:rmt-054
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a character reference to a C0 control character (form-feed) in an entity value. This will be legal (in XML 1.1) when the entity declaration is parsed, but what about when it is used? According to the grammar in the CR spec, it should be illegal (because the replacement text must match "content"), but this is probably not intended. This will be fixed in the PR version.

There is an output test associated with this input file.

Sections [Rules]:4.3.2 [78]
Test ID:ext02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests use of external parsed entities with different encodings than the base document.

There is an output test associated with this input file.

Sections [Rules]:4.3.3 [4,84]
Test ID:pr-xml-little
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for little-endian UTF-16 text which relies on Japanese characters. (Also requires ability to process a moderately complex DTD.)

Sections [Rules]:4.3.3 [4,84]
Test ID:pr-xml-utf-16
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support UTF-16 text which relies on Japanese characters. (Also requires ability to process a moderately complex DTD.)

Sections [Rules]:4.3.3 [4,84]
Test ID:pr-xml-utf-8
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for UTF-8 text which relies on Japanese characters. (Also requires ability to process a moderately complex DTD.)

Sections [Rules]:4.3.3 [4,84]
Test ID:weekly-little
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for little-endian UTF-16 encoding, and XML names which contain Japanese characters.

Sections [Rules]:4.3.3 [4,84]
Test ID:weekly-utf-16
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for UTF-16 encoding, and XML names which contain Japanese characters.

Sections [Rules]:4.3.3 [4,84]
Test ID:weekly-utf-8
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for UTF-8 encoding and XML names which contain Japanese characters.

Sections [Rules]:4.3.3 [80]
Test ID:valid-sa-031
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates a valid EncodingDecl within the prolog.

There is an output test associated with this input file.

Sections [Rules]:4.3.3 [81]
Test ID:valid-sa-099
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates the name of the encoding can be composed of lowercase characters.

There is an output test associated with this input file.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 whereas the VersionNum of the external DTD is 1.0. The character #xD7 which is a valid XML 1.1 but an invalid XML 1.0 character is present in both documents.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 whereas the VersionNum of the external DTD is 1.0. The character #x1FFF which is a valid XML 1.1 but an invalid XML 1.0 character is present in both documents.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 whereas the VersionNum of the external DTD is 1.0. The character #xF901 which is a valid XML 1.1 but an invalid XML 1.0 character is present in both documents.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 whereas the VersionNum of the external entity is 1.0. The character #xD7 which is a valid XML 1.1 but an invalid XML 1.0 character is present in both documents.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 whereas the VersionNum of the external entity is 1.0. The character #x1FFF which is a valid XML 1.1 but an invalid XML 1.0 character is present in both documents.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 whereas the VersionNum of the external entity is 1.0. The character #xF901 which is a valid XML 1.1 but an invalid XML 1.0 character is present in both documents.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v07.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external dtd is 1.1 and both contain the valid XML1.1 but invalid XML1.0 character #xD7.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v08.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external dtd is 1.1 and both contain the valid XML1.1 but invalid XML1.0 character #x1FFF.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v09.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external dtd is 1.1 and both contain the valid XML1.1 but invalid XML1.0 character #xF901.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v10.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external entity is 1.1 and both contain the valid XML1.1 but invalid XML1.0 character #xD7.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v11.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external entity is 1.1 and both contain the valid XML1.1 but invalid XML1.0 character #x1FFF.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v12.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external entity is 1.1 and both contain the valid XML1.1 but invalid XML1.0 character #xF901.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v13.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 but the external dtd does not contain a textDecl and both contain the valid XML1.1 but invalid XML1.0 character #xD7.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v14.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 but the external dtd does not contain a textDecl and both contain the valid XML1.1 but invalid XML1.0 character #x1FFF.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v15.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 but the external dtd does not contain a textDecl and both contain the valid XML1.1 but invalid XML1.0 character #xF901.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v16.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 but the external entity does not contain a textDecl and both contain the valid XML1.1 but invalid XML1.0 character #xD7.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v17.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 but the external entity does not contain a textDecl and both contain the valid XML1.1 but invalid XML1.0 character #x1FFF.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v18.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 but the external entity does not contain a textDecl and both contain the valid XML1.1 but invalid XML1.0 character #xF901.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v19.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external dtd is 1.1. The replacement text of an entity declared in the external DTD contains a reference to the character #x7F. This entity is not referenced in the document entity.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v20.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external dtd is 1.1. The replacement text of an entity declared in the external DTD contains a reference to the character #x80. This entity is not referenced in the document entity.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v21.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and external dtd is 1.1. The replacement text of an entity declared in the external DTD contains a reference to the character #x9F. This entity is not referenced in the document entity.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v22.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and the external entity is 1.1. The entity contains a reference to the character #x7F.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v23.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and the external entity is 1.1. The entity contains a reference to the character #x80.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v24.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document and the external entity is 1.1. The entity contains a reference to the character #x9F.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v25.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document is 1.1 and the textDecl is missing in the external DTD. The replacement text of an entity declared in the external DTD contains a reference to the character #x7F, #x8F. This entity is not referenced in the document entity.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v26.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document is 1.1 and the textDecl is missing in the external DTD. The replacement text of an entity declared in the external DTD contains a reference to the character #x80, #x90. This entity is not referenced in the document entity.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v27.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document is 1.1 and the textDecl is missing in the external DTD. The replacement text of an entity declared in the external DTD contains a reference to the character #x81, #x9F. This entity is not referenced in the document entity.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v28.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document is 1.1 and the textDecl is missing in the external entity. The replacement text of an entity declared in the external DTD contains a reference to the character #x7F, #x80, #x9F.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v29.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document is 1.1 and the textDecl is missing in the external entity. The replacement text of an entity declared in the external DTD contains a reference to the character #x85, #x8F.

Sections [Rules]:4.3.4
Test ID:ibm-valid-P77-ibm77v30.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document is 1.1 and the textDecl is missing in the external entity. The replacement text of an entity declared in the external DTD contains a reference to the character #x1, #x7F.

Sections [Rules]:4.4.2
Test ID:valid-sa-053
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests inclusion of a well-formed internal entity, which holds an element required by the content model.

There is an output test associated with this input file.

Sections [Rules]:4.4.8
Test ID:valid-sa-070
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Verifies that internal parameter entities are correctly expanded within the internal subset.

There is an output test associated with this input file.

Sections [Rules]:4.4.8
Test ID:valid-not-sa-019
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that a parameter entity will be expanded with spaces on either side.

There is an output test associated with this input file.

Sections [Rules]:4.4.8
Test ID:valid-not-sa-020
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Parameter entities expand with spaces on either side.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:valid-sa-065
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests ability to define an internal entity which can't legally be expanded (contains an unquoted <).

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:valid-sa-087
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests whether character references in internal entities are expanded early enough, by relying on correct handling to make the entity be well formed.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:valid-sa-088
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests whether entity references in internal entities are expanded late enough, by relying on correct handling to make the expanded text be valid. (If it's expanded too early, the entity will parse as an element that's not valid in that context.)

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:valid-sa-101
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

This tests whether entity expansion is (incorrectly) done while processing entity declarations; if it is, the entity value literal will terminate prematurely.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:valid-sa-117
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that entity expansion is done while processing entity declarations.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:valid-sa-118
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test demonstrates that entity expansion is done while processing entity declarations.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:v-pe00
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests construction of internal entity replacement text, using an example in the XML specification.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:v-pe03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests construction of internal entity replacement text, using an example in the XML specification.

There is an output test associated with this input file.

Sections [Rules]:4.5
Test ID:v-pe02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests construction of internal entity replacement text, using a complex example in the XML specification.

There is an output test associated with this input file.

Sections [Rules]:4.7
Test ID:valid-sa-069
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Verifies that an XML parser will parse a NOTATION declaration; the output phase of this test ensures that it's reported to the application.

There is an output test associated with this input file.

Sections [Rules]:4.7
Test ID:ibm-valid-P82-ibm82v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl in P82 and PublicID in P83

There is an output test associated with this input file.

Sections [Rules]:4.7 [82]
Test ID:notation01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

NOTATION declarations don't need SYSTEM IDs; and externally declared notations may be used to declare unparsed entities in the internal DTD subset. The notation must be reported to the application.

There is an output test associated with this input file.

Sections [Rules]:B.
Test ID:ibm-valid-P85-ibm85v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

This test case covers 149 legal character ranges plus 51 single legal characters for BaseChar in P85 using a PI target Name

Sections [Rules]:B.
Test ID:ibm-valid-P86-ibm86v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 86

This test case covers 2 legal character ranges plus 1 single legal characters for IdeoGraphic in P86 using a PI target Name

Sections [Rules]:B.
Test ID:ibm-valid-P87-ibm87v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

This test case covers 65 legal character ranges plus 30 single legal characters for CombiningChar in P87 using a PI target Name

Sections [Rules]:B.
Test ID:ibm-valid-P88-ibm88v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

This test case covers 15 legal character ranges for Digit in P88 using a PI target Name

Sections [Rules]:B.
Test ID:ibm-valid-P89-ibm89v01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

This test case covers 3 legal character ranges plus 8 single legal characters for Extender in P89 using a PI target Name

Sections [Rules]:E15
Test ID:rmt-e2e-15e
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Element content can contain entity reference if replacement text is whitespace

Sections [Rules]:E15
Test ID:rmt-e2e-15f
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Element content can contain entity reference if replacement text is whitespace, even if it came from a character reference in the literal entity value

Sections [Rules]:E15
Test ID:rmt-e2e-15i
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Element content can contain a comment

Sections [Rules]:E15
Test ID:rmt-e2e-15j
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Element content can contain a PI

Sections [Rules]:E15
Test ID:rmt-e2e-15k
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Mixed content can contain a comment

Sections [Rules]:E15
Test ID:rmt-e2e-15l
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Mixed content can contain a PI

Sections [Rules]:E18
Test ID:rmt-e2e-18
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

External entity containing start of entity declaration is base URI for system identifier

There is an output test associated with this input file.

Sections [Rules]:E19
Test ID:rmt-e2e-19
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Parameter entities and character references are included-in-literal, but general entities are bypassed.

There is an output test associated with this input file.

Sections [Rules]:E22
Test ID:rmt-e2e-22
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

UTF-8 entities may start with a BOM

Sections [Rules]:E24
Test ID:rmt-e2e-24
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Either the built-in entity or a character reference can be used to represent greater-than after two close-square-brackets

Sections [Rules]:E29
Test ID:rmt-e2e-29
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Three-letter language codes are allowed

Sections [Rules]:E36
Test ID:rmt-e2e-36
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

An external ATTLIST declaration does not make a document non-standalone if the normalization would have been the same without the declaration

Sections [Rules]:E41
Test ID:rmt-e2e-41
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

An xml:lang attribute may be empty

Sections [Rules]:E48
Test ID:rmt-e2e-48
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

ANY content allows character data

Sections [Rules]:E50
Test ID:rmt-e2e-50
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

All line-ends are normalized, even those not passed to the application. NB this can only be tested effectively in XML 1.1, since CR is in the S production; in 1.1 we can use NEL which isn't.

Sections [Rules]:E60
Test ID:rmt-e2e-60
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Conditional sections are allowed in external parameter entities referred to from the internal subset.

Sections [Rules]:E9
Test ID:rmt-e2e-9a
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

An unused attribute default need only be syntactically correct

3.2 Invalid XML Documents

All conforming XML 1.0 Validating Processors are required to report recoverable errors in the case of documents which are Invalid. Such errors are violations of some validity constraint (VC).

If a validating processor does not report an error when given one of these test cases, or if the error reported is a fatal error, it is not conformant. If the error reported does not correspond to the problem listed in this test description, that could also be a conformance problem; it might instead be a faulty diagnostic.

All conforming XML 1.0 Nonvalidating Processors should accept these documents, reporting no errors.

Sections [Rules]:-
Test ID:rmt-ns10-017
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: no namespaces

Sections [Rules]:2
Test ID:rmt-ns10-027
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: using the xml prefix undeclared

Sections [Rules]:2.1 [1]
Test ID:o-p01pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no prolog

Sections [Rules]:2.1 [1]
Test ID:o-p01pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Misc items after the document

Sections [Rules]:2.11
Test ID:rmt-030
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a NEL character in an NMTOKENS attribute; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-032
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an LSEP character in an NMTOKENS attribute; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-046
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a NEL character in element content whitespace; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.11
Test ID:rmt-048
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an LSEP character in element content whitespace; well-formed in both XML 1.0 and 1.1, but valid only in 1.1

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-015
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a multiply sign in a name, legal in XML 1.1, illegal in XML 1.0

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-017
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a Byzantine Musical Symbol Kratimata in a name, legal in XML 1.1, illegal in XML 1.0

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-018
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has the last legal namechar in XML 1.1, illegal in XML 1.0

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-036
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an NMTOKENS attribute containing a NEL character that comes from a character reference in an internal entity. Because NEL is not in the S production (even though real NELs are converted to LF on input), this is invalid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-037
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has an NMTOKENS attribute containing a NEL character that comes from a character reference in an internal entity. Because NEL is not in the S production (even though real NELs are converted to LF on input), this is invalid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-052
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has element content whitespace containing a NEL character that comes from a character reference in an internal entity. Because NEL is not in the S production (even though real NELs are converted to LF on input), this is invalid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3
Test ID:rmt-053
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has element content whitespace containing a NEL character that comes from a character reference in an internal entity. Because NEL is not in the S production (even though real NELs are converted to LF on input), this is invalid in both XML 1.0 and 1.1.

There is an output test associated with this input file.

Sections [Rules]:2.3 [10]
Test ID:o-p10pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid attribute values

Sections [Rules]:2.3 [3]
Test ID:o-p03pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

all valid S characters

Sections [Rules]:2.3 [4]
Test ID:o-p04pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

names with all valid ASCII characters, and one from each other class in NameChar

Sections [Rules]:2.3 [5]
Test ID:o-p05pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

various valid Name constructions

Sections [Rules]:2.3 [6]
Test ID:o-p06fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Requires at least one name.

Sections [Rules]:2.3 [8]
Test ID:o-p08fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

at least one Nmtoken is required.

Sections [Rules]:2.3 [8]
Test ID:o-p08fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

an invalid Nmtoken character.

Sections [Rules]:2.4 [14]
Test ID:o-p14pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid CharData

Sections [Rules]:2.4 2.7 [18] 3
Test ID:empty
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

CDATA section containing only white space does not match the nonterminal S, and cannot appear in these positions.

Sections [Rules]:2.5 [15]
Test ID:o-p15pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid comments

Sections [Rules]:2.6 [16]
Test ID:o-p16pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid form of Processing Instruction. Shows that whitespace character data is valid before end of processing instruction.

Sections [Rules]:2.6 [16]
Test ID:o-p16pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid form of Processing Instruction. Shows that whitespace character data is valid before end of processing instruction.

Sections [Rules]:2.6 [16] [17]
Test ID:o-p16pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid form of Processing Instruction. Shows that whitespace character data is valid before end of processing instruction.

Sections [Rules]:2.7 [18]
Test ID:o-p18pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid CDSect's. Note that a CDStart in a CDSect is not recognized as such

Sections [Rules]:2.8
Test ID:invalid--005
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the "Proper Declaration/PE Nesting" validity constraint by fragmenting an element declaration between two parameter entities.

Sections [Rules]:2.8
Test ID:invalid--006
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the "Proper Declaration/PE Nesting" validity constraint by fragmenting an element declaration between two parameter entities.

Sections [Rules]:2.8
Test ID:root
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Root Element Type VC

Sections [Rules]:2.8
Test ID:ibm-invalid-P28-ibm28i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

The test violates VC:Root Element Type in P28. The Name in the document type declaration does not match the element type of the root element.

There is an output test associated with this input file.

Sections [Rules]:2.8 [22]
Test ID:o-p22pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

prolog can be empty

Sections [Rules]:2.8 [22]
Test ID:o-p22pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

XML declaration only

Sections [Rules]:2.8 [22]
Test ID:o-p22pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

XML decl and Misc

Sections [Rules]:2.8 [23]
Test ID:o-p23pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows a valid XML declaration along with version info.

Sections [Rules]:2.8 [23]
Test ID:o-p23pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows a valid XML declaration along with encoding declaration.

Sections [Rules]:2.8 [23]
Test ID:o-p23pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows a valid XML declaration along with Standalone Document Declaration.

Sections [Rules]:2.8 [23]
Test ID:o-p23pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows a valid XML declaration, encoding declarationand Standalone Document Declaration.

Sections [Rules]:2.8 [24]
Test ID:o-p24pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows a prolog that has the VersionInfo delimited by double quotes.

Sections [Rules]:2.8 [24]
Test ID:o-p24pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows a prolog that has the VersionInfo delimited by single quotes.

Sections [Rules]:2.8 [24]
Test ID:o-p24pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows whitespace is allowed in prolog before version info.

Sections [Rules]:2.8 [24]
Test ID:o-p24pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows whitespace is allowed in prolog on both sides of equal sign.

Sections [Rules]:2.8 [25]
Test ID:o-p25pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows whitespace is NOT necessary before or after equal sign of versioninfo.

Sections [Rules]:2.8 [25]
Test ID:o-p25pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows whitespace can be used on both sides of equal sign of versioninfo.

Sections [Rules]:2.8 [26]
Test ID:o-p26pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

The valid version number. We cannot test others because a 1.0 processor is allowed to fail them.

Sections [Rules]:2.8 [27]
Test ID:o-p27pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Comments are valid as the Misc part of the prolog.

Sections [Rules]:2.8 [27]
Test ID:o-p27pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Processing Instructions are valid as the Misc part of the prolog.

Sections [Rules]:2.8 [27]
Test ID:o-p27pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace is valid as the Misc part of the prolog.

Sections [Rules]:2.8 [27]
Test ID:o-p27pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

A combination of comments, whitespaces and processing instructions are valid as the Misc part of the prolog.

Sections [Rules]:2.9
Test ID:inv-not-sa01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that optional whitespace causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that attributes needing normalization cause a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that attributes needing defaulting cause a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that a token attribute that needs normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that a NOTATION attribute that needs normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa07
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an NMTOKEN attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa08
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an NMTOKENS attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa09
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an ID attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa10
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an IDREF attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa11
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an IDREFS attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa12
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an ENTITY attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:inv-not-sa13
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Standalone Document Declaration VC, ensuring that an ENTITIES attribute needing normalization causes a validity error.

Sections [Rules]:2.9
Test ID:ibm-invalid-P32-ibm32i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

This test violates VC: Standalone Document Declaration in P32. The standalone document declaration has the value yes, BUT there is an external markup declaration of attributes with default values, and the associated element appears in the document with specified values for those attributes.

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:ibm-invalid-P32-ibm32i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

This test violates VC: Standalone Document Declaration in P32. The standalone document declaration has the value yes, BUT there is an external markup declaration of attributes with values that will change if normalized.

There is an output test associated with this input file.

Sections [Rules]:2.9
Test ID:ibm-invalid-P32-ibm32i04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

This test violates VC: Standalone Document Declaration in P32. The standalone document declaration has the value yes, BUT there is an external markup declaration of element with element content, and white space occurs directly within the mixed content.

There is an output test associated with this input file.

Sections [Rules]:2.9 [32]
Test ID:o-p32pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Double quotes can be used as delimeters for the value of a Standalone Document Declaration.

Sections [Rules]:2.9 [32]
Test ID:o-p32pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Single quotes can be used as delimeters for the value of a Standalone Document Declaration.

Sections [Rules]:3
Test ID:inv-dtd03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Element Valid" VC (clause 2) by omitting a required element.

Sections [Rules]:3
Test ID:el01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 4) by including an undeclared child element.

Sections [Rules]:3
Test ID:el02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 1) by including elements in an EMPTY content model.

Sections [Rules]:3
Test ID:el03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 3) by including a child element not permitted by a mixed content model.

Sections [Rules]:3
Test ID:el06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 1), using one of the predefined internal entities inside an EMPTY content model.

Sections [Rules]:3
Test ID:inv-not-sa14
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

CDATA sections containing only whitespace do not match the nonterminal S, and cannot appear in these positions.

Sections [Rules]:3
Test ID:optional01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one is required.

Sections [Rules]:3
Test ID:optional02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing two children where one is required.

Sections [Rules]:3
Test ID:optional03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where two are required.

Sections [Rules]:3
Test ID:optional04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing three children where two are required.

Sections [Rules]:3
Test ID:optional05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or two are required (one construction of that model).

Sections [Rules]:3
Test ID:optional06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or two are required (a second construction of that model).

Sections [Rules]:3
Test ID:optional07
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or two are required (a third construction of that model).

Sections [Rules]:3
Test ID:optional08
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or two are required (a fourth construction of that model).

Sections [Rules]:3
Test ID:optional09
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or two are required (a fifth construction of that model).

Sections [Rules]:3
Test ID:optional10
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing three children where one or two are required (a basic construction of that model).

Sections [Rules]:3
Test ID:optional11
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing three children where one or two are required (a second construction of that model).

Sections [Rules]:3
Test ID:optional12
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing three children where one or two are required (a third construction of that model).

Sections [Rules]:3
Test ID:optional13
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing three children where one or two are required (a fourth construction of that model).

Sections [Rules]:3
Test ID:optional14
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing three children where one or two are required (a fifth construction of that model).

Sections [Rules]:3
Test ID:optional20
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or more are required (a sixth construction of that model).

Sections [Rules]:3
Test ID:optional21
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or more are required (a seventh construction of that model).

Sections [Rules]:3
Test ID:optional22
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or more are required (an eigth construction of that model).

Sections [Rules]:3
Test ID:optional23
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or more are required (a ninth construction of that model).

Sections [Rules]:3
Test ID:optional24
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing no children where one or more are required (a tenth construction of that model).

Sections [Rules]:3
Test ID:optional25
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Element Valid VC (clause 2) for one instance of "children" content model, providing text content where one or more elements are required.

Sections [Rules]:3
Test ID:ibm-invalid-P39-ibm39i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

This test violates VC: Element Valid in P39. Element a is declared empty in DTD, but has content in the document.

There is an output test associated with this input file.

Sections [Rules]:3
Test ID:ibm-invalid-P39-ibm39i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

This test violates VC: Element Valid in P39. root is declared only having element children in DTD, but have text content in the document.

There is an output test associated with this input file.

Sections [Rules]:3
Test ID:ibm-invalid-P39-ibm39i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

This test violates VC: Element Valid in P39. Illegal elements are inserted in b's content of Mixed type.

There is an output test associated with this input file.

Sections [Rules]:3
Test ID:ibm-invalid-P39-ibm39i04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

This test violates VC: Element Valid in P39. Element c has undeclared element as its content of ANY type

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-invalid-P41-ibm41i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

This test violates VC: Attribute Value Type in P41. attr1 for Element b is not declared.

There is an output test associated with this input file.

Sections [Rules]:3.1
Test ID:ibm-invalid-P41-ibm41i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

This test violates VC: Attribute Value Type in P41. attr3 for Element b is given a value that does not match the declaration in the DTD.

There is an output test associated with this input file.

Sections [Rules]:3.1 [40]
Test ID:o-p40pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Elements content can be empty.

Sections [Rules]:3.1 [40]
Test ID:o-p40pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace is valid within a Start-tag.

Sections [Rules]:3.1 [40]
Test ID:o-p40pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace and Multiple Attributes are valid within a Start-tag.

Sections [Rules]:3.1 [40] [41]
Test ID:o-p40pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Attributes are valid within a Start-tag.

Sections [Rules]:3.1 [41]
Test ID:o-p41pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Attributes are valid within a Start-tag.

Sections [Rules]:3.1 [41]
Test ID:o-p41pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace is valid within a Start-tags Attribute.

Sections [Rules]:3.1 [42]
Test ID:o-p42pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Test shows proper syntax for an End-tag.

Sections [Rules]:3.1 [42]
Test ID:o-p42pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace is valid after name in End-tag.

Sections [Rules]:3.1 [44]
Test ID:o-p44pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Valid display of an Empty Element Tag.

Sections [Rules]:3.1 [44]
Test ID:o-p44pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Empty Element Tags can contain an Attribute.

Sections [Rules]:3.1 [44]
Test ID:o-p44pass3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace is valid in an Empty Element Tag following the end of the attribute value.

Sections [Rules]:3.1 [44]
Test ID:o-p44pass4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace is valid after the name in an Empty Element Tag.

Sections [Rules]:3.1 [44]
Test ID:o-p44pass5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace and Multiple Attributes are valid in an Empty Element Tag.

Sections [Rules]:3.1 2.10
Test ID:inv-required01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Attribute Value Type (declared) VC for the xml:space attribute

Sections [Rules]:3.1 2.12
Test ID:inv-required02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Attribute Value Type (declared) VC for the xml:lang attribute

Sections [Rules]:3.2
Test ID:el04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Unique Element Type Declaration VC.

Sections [Rules]:3.2
Test ID:ibm-invalid-P45-ibm45i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

This test violates VC: Unique Element Type Declaration. Element not_unique has been declared 3 time in the DTD.

There is an output test associated with this input file.

Sections [Rules]:3.2.1
Test ID:invalid--002
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the "Proper Group/PE Nesting" validity constraint by fragmenting a content model between two parameter entities.

Sections [Rules]:3.2.1
Test ID:ibm-invalid-P49-ibm49i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Violates VC:Proper Group/PE Nesting in P49. Open and close parenthesis for a choice content model are in different PE replace Texts.

There is an output test associated with this input file.

Sections [Rules]:3.2.1
Test ID:ibm-invalid-P50-ibm50i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Violates VC:Proper Group/PE Nesting in P50. Open and close parenthesis for a seq content model are in different PE replace Texts.

There is an output test associated with this input file.

Sections [Rules]:3.2.1, 2.2
Test ID:ibm-valid-P46-ibm46i01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite

An element with Element-Only content contains a ref to the character #x85 (not a whitespace character).

Sections [Rules]:3.2.1, 2.2
Test ID:ibm-valid-P46-ibm46i02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite

An element with Element-Only content contains a ref to the character #x2028 (not a whitespace character).

Sections [Rules]:3.2.2
Test ID:inv-dtd01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the No Duplicate Types VC

Sections [Rules]:3.2.2
Test ID:el05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the No Duplicate Types VC.

Sections [Rules]:3.2.2
Test ID:ibm-invalid-P51-ibm51i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Violates VC:Proper Group/PE Nesting in P51. Open and close parenthesis for a Mixed content model are in different PE replace Texts.

There is an output test associated with this input file.

Sections [Rules]:3.2.2
Test ID:ibm-invalid-P51-ibm51i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Violates VC:No Duplicate Types in P51. Element a appears twice in the Mixed content model of Element e.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:id01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the ID (is a Name) VC

Sections [Rules]:3.3.1
Test ID:id02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the ID (appears once) VC

Sections [Rules]:3.3.1
Test ID:id03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the One ID per Element Type VC

Sections [Rules]:3.3.1
Test ID:id04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the ID Attribute Default VC

Sections [Rules]:3.3.1
Test ID:id05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the ID Attribute Default VC

Sections [Rules]:3.3.1
Test ID:id06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the IDREF (is a Name) VC

Sections [Rules]:3.3.1
Test ID:id07
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the IDREFS (is a Names) VC

Sections [Rules]:3.3.1
Test ID:id08
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the IDREF (matches an ID) VC

Sections [Rules]:3.3.1
Test ID:id09
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the IDREF (IDREFS matches an ID) VC

Sections [Rules]:3.3.1
Test ID:attr01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Entity Name" VC for the ENTITY attribute type.

Sections [Rules]:3.3.1
Test ID:attr02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Entity Name" VC for the ENTITIES attribute type.

Sections [Rules]:3.3.1
Test ID:attr03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Notation Attributes" VC for the NOTATION attribute type, first clause: value must be one of the ones that's declared.

Sections [Rules]:3.3.1
Test ID:attr04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Notation Attributes" VC for the NOTATION attribute type, second clause: the names in the declaration must all be declared.

Sections [Rules]:3.3.1
Test ID:attr05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Name Token" VC for the NMTOKEN attribute type.

Sections [Rules]:3.3.1
Test ID:attr06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Name Token" VC for the NMTOKENS attribute type.

Sections [Rules]:3.3.1
Test ID:attr07
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Enumeration" VC by providing a value which wasn't one of the choices.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: ID. The value of the ID attribute "UniqueName" is "@999" which does not meet the Name production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: ID. The two ID attributes "attr" and "UniqueName" have the same value "Ac999" for the element "b" and the element "tokenizer".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: ID Attribute Default. The "#FIXED" occurs in the DefaultDecl for the ID attribute "UniqueName".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: ID Attribute Default. The constant string "BOGUS" occurs in the DefaultDecl for the ID attribute "UniqueName".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: One ID per Element Type. The element "a" has two ID attributes "first" and "second".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: IDREF. The value of the IDREF attribute "reference" is "@456" which does not meet the Name production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: IDREF. The value of the IDREF attribute "reference" is "BC456" which does not match the value assigned to any ID attributes.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: IDREFS. The value of the IDREFS attribute "reference" is "AC456 #567" which does not meet the Names production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: IDREFS. The value of the IDREFS attribute "reference" is "EF456 DE355" which does not match the values assigned to two ID attributes.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: Entity Name. The value of the ENTITY attribute "sun" is "ima ge" which does not meet the Name production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: Entity Name. The value of the ENTITY attribute "sun" is "notimage" which does not match the name of any unparsed entity declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: Entity Name. The value of the ENTITY attribute "sun" is "parsedentity" which matches the name of a parsed entity instead of an unparsed entity declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: Entity Name. The value of the ENTITIES attribute "sun" is "#image1 @image" which does not meet the Names production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: ENTITIES. The value of the ENTITIES attribute "sun" is "image3 image4" which does not match the names of two unparsed entities declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i16.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: ENTITIES. The value of the ENTITIES attribute "sun" is "parsedentity1 parsedentity2" which matches the names of two parsed entities instead of two unparsed entities declared.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i17.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: Name Token. The value of the NMTOKEN attribute "thistoken" is "x : image" which does not meet the Nmtoken production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P56-ibm56i18.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests invalid TokenizedType which is against P56 VC: Name Token. The value of the NMTOKENS attribute "thistoken" is "@lang y: #country" which does not meet the Nmtokens production.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P58-ibm58i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests invalid NotationType which is against P58 VC: Notation Attributes. The attribute "content-encoding" with value "raw" is not a value from the list "(base64|uuencode)".

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P58-ibm58i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests invalid NotationType which is against P58 VC: Notation Attributes. The attribute "content-encoding" with value "raw" is a value from the list "(base64|uuencode|raw|ascii)", but "raw" is not a declared notation.

There is an output test associated with this input file.

Sections [Rules]:3.3.1
Test ID:ibm-invalid-P59-ibm59i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests invalid Enumeration which is against P59 VC: Enumeration. The value of the attribute is "ONE" which matches neither "one" nor "two" as declared in the Enumeration in the AttDef in the AttlistDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3.1 [58] [59] Errata [E2]
Test ID:o-e2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Validity Constraint: No duplicate tokens

Sections [Rules]:3.3.2
Test ID:inv-required00
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the Required Attribute VC.

Sections [Rules]:3.3.2
Test ID:attr08
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Fixed Attribute Default" VC by providing the wrong value.

Sections [Rules]:3.3.2
Test ID:attr09
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal IDREF value.

Sections [Rules]:3.3.2
Test ID:attr10
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal IDREFS value.

Sections [Rules]:3.3.2
Test ID:attr11
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal ENTITY value.

Sections [Rules]:3.3.2
Test ID:attr12
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal ENTITIES value.

Sections [Rules]:3.3.2
Test ID:attr13
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal NMTOKEN value.

Sections [Rules]:3.3.2
Test ID:attr14
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal NMTOKENS value.

Sections [Rules]:3.3.2
Test ID:attr15
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal NOTATIONS value.

Sections [Rules]:3.3.2
Test ID:attr16
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Attribute Default Legal" VC by providing an illegal enumeration value.

Sections [Rules]:3.3.2
Test ID:ibm-invalid-P60-ibm60i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests invalid DefaultDecl which is against P60 VC: Required Attribute. The attribute "chapter" for the element "two" is declared as #REQUIRED in the DefaultDecl in the AttlistDecl, but the value of this attribute is not given.

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-invalid-P60-ibm60i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests invalid DefaultDecl which is against P60 VC: Fixed Attribute Default.. The attribute "chapter" for the element "one" is declared as #FIXED with the given value "Introduction" in the DefaultDecl in the AttlistDecl, but the value of a instance of this attribute is assigned to "JavaBeans".

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-invalid-P60-ibm60i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests invalid DefaultDecl which is against P60 VC: Attribute Default Legal. The declared default value "c" is not legal for the type (a|b) in the AttDef in the AttlistDecl.

There is an output test associated with this input file.

Sections [Rules]:3.3.2
Test ID:ibm-invalid-P60-ibm60i04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests invalid DefaultDecl which is against P60 VC: Attribute Default Legal. The declared default value "@#$" is not legal for the type NMTOKEN the AttDef in the AttlistDecl.

There is an output test associated with this input file.

Sections [Rules]:3.4 [62]
Test ID:invalid-not-sa-022
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Test the "Proper Conditional Section/ PE Nesting" validity constraint.

There is an output test associated with this input file.

Sections [Rules]:3 3.1 [39] [43]
Test ID:o-p39pass2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Character data is valid element content.

Sections [Rules]:3 3.1 [39] [44]
Test ID:o-p39pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Empty element tag may be used for any element which has no content.

Sections [Rules]:4
Test ID:rmt-ns10-019
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: prefixed element

Sections [Rules]:4
Test ID:rmt-ns10-020
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: prefixed attribute

Sections [Rules]:4.1 [66]
Test ID:o-p66pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid character references

Sections [Rules]:4.2.2
Test ID:inv-dtd02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests the "Notation Declared" VC by using an undeclared notation name.

Sections [Rules]:4.2.2
Test ID:ibm-invalid-P76-ibm76i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests invalid NDataDecl which is against P76 VC: Notation declared. The Name "JPGformat" in the NDataDecl in the EntityDecl for "ge2" does not match the Name of any declared notation.

There is an output test associated with this input file.

Sections [Rules]:4.2.2 [75]
Test ID:o-p75pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

valid external identifiers

Sections [Rules]:4.2 [74]
Test ID:o-p74pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

PEDef is either an entity value or an external id

Sections [Rules]:4.3.3 2.8
Test ID:utf16b
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests reading an invalid "big endian" UTF-16 document

Sections [Rules]:4.3.3 2.8
Test ID:utf16l
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Tests reading an invalid "little endian" UTF-16 document

Sections [Rules]:5.1
Test ID:rmt-ns10-024
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: prefix rebinding

Sections [Rules]:5.2
Test ID:rmt-ns10-018
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: default namespace

Sections [Rules]:5.2
Test ID:rmt-ns10-021
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: default namespace and unbinding

Sections [Rules]:5.2
Test ID:rmt-ns10-022
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Simple legal case: default namespace and rebinding

Sections [Rules]:5.3
Test ID:rmt-ns10-037
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: different attributes with same local name

Sections [Rules]:5.3
Test ID:rmt-ns10-038
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: prefixed and unprefixed attributes with same local name

Sections [Rules]:5.3
Test ID:rmt-ns10-039
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: prefixed and unprefixed attributes with same local name, with default namespace

Sections [Rules]:5.3
Test ID:rmt-ns10-040
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: prefixed and unprefixed attributes with same local name, with default namespace and element in default namespace

Sections [Rules]:5.3
Test ID:rmt-ns10-041
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: prefixed and unprefixed attributes with same local name, element in same namespace as prefixed attribute

Sections [Rules]:6.1
Test ID:rmt-ns11-003
RECOMMENDATION:NS1.1
Collection:Richard Tobin's XML Namespaces 1.1 test suite 14 Feb 2003

1.1 style prefix unbinding

Sections [Rules]:6.1
Test ID:rmt-ns11-004
RECOMMENDATION:NS1.1
Collection:Richard Tobin's XML Namespaces 1.1 test suite 14 Feb 2003

1.1 style prefix unbinding and rebinding

Sections [Rules]:E14
Test ID:rmt-e2e-14
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Declarations mis-nested wrt parameter entities are just validity errors (but note that some parsers treat some such errors as fatal)

Sections [Rules]:E15
Test ID:rmt-e2e-15a
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Empty content can't contain an entity reference

Sections [Rules]:E15
Test ID:rmt-e2e-15b
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Empty content can't contain a comment

Sections [Rules]:E15
Test ID:rmt-e2e-15c
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Empty content can't contain a PI

Sections [Rules]:E15
Test ID:rmt-e2e-15d
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Empty content can't contain whitespace

Sections [Rules]:E15
Test ID:rmt-e2e-15g
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Element content can't contain character reference to whitespace

Sections [Rules]:E15
Test ID:rmt-e2e-15h
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Element content can't contain entity reference if replacement text is character reference to whitespace

Sections [Rules]:E2
Test ID:rmt-e2e-2a
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Duplicate token in enumerated attribute declaration

Sections [Rules]:E2
Test ID:rmt-e2e-2b
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Duplicate token in NOTATION attribute declaration

Sections [Rules]:E20
Test ID:rmt-e2e-20
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Tokens, after normalization, must be separated by space, not other whitespace characters

Sections [Rules]:E9
Test ID:rmt-e2e-9b
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

An attribute default must be syntactically correct even if unused

Sections [Rules]:NE05
Test ID:rmt-ns10-028
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: declaring the xml prefix correctly

Sections [Rules]:NE05
Test ID:rmt-ns10-034
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: binding a reserved prefix

Sections [Rules]:NE08
Test ID:rmt-ns10-045
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Colon in ID attribute name

Sections [Rules]:NE08
Test ID:rmt-ns10-046
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Colon in ID attribute name

3.3 Documents that are Not Well Formed

All conforming XML 1.0 Processors are required to report fatal errors in the case of documents which are not Well Formed. Such errors are basically of two types: (a) the document violates the XML grammar; or else (b) it violates a well formedness constraint (WFC). There is a single exception to that requirement: nonvalidating processors which do not read certain types of external entities are not required to detect (and hence report) these errors.

If a processor does not report a fatal error when given one of these test cases, it is not conformant. If the error reported does not correspond to the problem listed in this test description, that could also be a conformance problem; it might instead be a faulty diagnostic.

Sections [Rules]:1
Test ID:rmt-ns10-009
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace equality test: plain repetition

Sections [Rules]:1
Test ID:rmt-ns10-010
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace equality test: use of character reference

Sections [Rules]:1
Test ID:rmt-ns10-011
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace equality test: use of entity reference

Sections [Rules]:1
Test ID:rmt-ns10-012
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace inequality test: equal after attribute value normalization

Sections [Rules]:2
Test ID:rmt-ns10-016
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Bad QName syntax: xmlns:

Sections [Rules]:2
Test ID:rmt-ns10-023
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Illegal use of 1.1-style prefix unbinding in 1.0 document

Sections [Rules]:2.1
Test ID:ibm-not-wf-P01-ibm01n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 1

Tests a document with no element. A well-formed document should have at lease one elements.

Sections [Rules]:2.1
Test ID:ibm-not-wf-P01-ibm01n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 1

Tests a document with wrong ordering of its prolog and element. The element occurs before the xml declaration and the DTD.

Sections [Rules]:2.1
Test ID:ibm-not-wf-P01-ibm01n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 1

Tests a document with wrong combination of misc and element. One PI occurs between two elements.

Sections [Rules]:2.1 [1]
Test ID:not-wf-sa-050
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Empty document, with no root element.

Sections [Rules]:2.1 [1]
Test ID:o-p01fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S cannot occur before the prolog

Sections [Rules]:2.1 [1]
Test ID:o-p01fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

comments cannot occur before the prolog

Sections [Rules]:2.1 [1]
Test ID:o-p01fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only one document element

Sections [Rules]:2.1 [1]
Test ID:o-p01fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

document element must be complete.

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x00

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x01

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x02

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x03

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x04

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x05

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x06

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x07

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x08

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x0B

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x0C

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x0E

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x0F

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x10

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x11

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n16.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x12

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n17.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x13

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n18.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x14

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n19.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x15

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n20.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x16

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n21.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x17

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n22.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x18

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n23.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x19

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n24.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x1A

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n25.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x1B

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n26.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x1C

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n27.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x1D

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n28.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x1E

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n29.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #x1F

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n30.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #xD800

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n31.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #xDFFF

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n32.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #xFFFE

Sections [Rules]:2.2
Test ID:ibm-not-wf-P02-ibm02n33.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 2

Tests a comment which contains an illegal Char: #xFFFF

Sections [Rules]:2.2
Test ID:rmt-011
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a C1 control, legal in XML 1.0, illegal in XML 1.1

Sections [Rules]:2.2
Test ID:rmt-013
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a DEL, legal in XML 1.0, illegal in XML 1.1

Sections [Rules]:2.2
Test ID:rmt-038
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a C0 control character (form-feed), illegal in both XML 1.0 and 1.1

Sections [Rules]:2.2
Test ID:rmt-039
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a C0 control character (form-feed), illegal in both XML 1.0 and 1.1

Sections [Rules]:2.2
Test ID:rmt-041
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a C1 control character (partial line up), legal in XML 1.0 but not 1.1

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x2.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x3.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x4.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x5.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x6.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n07.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x7.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n08.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n09.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x0.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n010.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x100.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n011.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x0B.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n012.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x0C.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n013.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x0D.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n014.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x0E.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n015.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x0F.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n016.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x10.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n017.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x11.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n018.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x12.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n019.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x13.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n020.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x14.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n021.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x15.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n022.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x16.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n023.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x17.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n024.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x18.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n025.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x19.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n026.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1A.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n027.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1B.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n028.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1C.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n029.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1D.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n030.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1E.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n031.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x1F.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n032.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x7F.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n033.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x80.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n034.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x81.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n035.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x82.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n036.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x83.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n037.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x84.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n038.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x86.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n039.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x86.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n040.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x87.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n041.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x88.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n042.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x89.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n043.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8A.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n044.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8B.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n045.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8C.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n046.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8D.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n047.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8E.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n048.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x8F.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n049.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x90.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n050.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x91.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n051.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x92.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n052.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x93.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n053.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x94.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n054.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x95.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n055.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x96.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n056.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x97.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n057.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x98.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n058.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x99.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n059.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x9A.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n060.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x9B.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n061.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x9C.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n062.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x9D.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n063.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control character 0x9E.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n064.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control characters present in an external entity.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n065.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control characters present in an external entity.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n066.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded control characters present in an external entity.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n067.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded character 0xD800. (Invalid UTF8 sequence)

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n068.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded character 0xFFFE.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n069.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains embeded character 0xFFFF.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n070.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains a reference to character 0xFFFE.

Sections [Rules]:2.2,4.1
Test ID:ibm-not-wf-P02-ibm02n071.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 2

This test contains a reference to character 0xFFFF.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-030
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A form feed is not a legal XML character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-031
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A form feed is not a legal XML character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-032
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A form feed is not a legal XML character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-033
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

An ESC (octal 033) is not a legal XML character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-034
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A form feed is not a legal XML character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-142
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character #x0000 is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-143
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character #x001F is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-144
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character #xFFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-145
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character #xD800 is not legal anywhere in an XML document. (If it appeared in a UTF-16 surrogate pair, it'd represent half of a UCS-4 character and so wouldn't really be in the document.)

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-146
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character references must also refer to legal XML characters; #x00110000 is one more than the largest legal character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-166
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-167
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFE is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-168
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

An unpaired surrogate (D800) is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-169
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

An unpaired surrogate (DC00) is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-170
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Four byte UTF-8 encodings can encode UCS-4 characters which are beyond the range of legal XML characters (and can't be expressed in Unicode surrogate pairs). This document holds such a character.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-171
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-172
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-173
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-174
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-175
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:not-wf-sa-177
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character FFFF is not legal anywhere in an XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail10
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail11
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail12
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail13
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail14
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail15
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail16
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail17
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail18
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail19
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail20
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail21
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail22
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail23
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail24
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail25
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail26
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail27
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail28
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail29
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail30
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail31
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail7
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail8
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.2 [2]
Test ID:o-p02fail9
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P03-ibm03n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 3

Tests an end tag which contains an illegal space character #x3000 which follows the element name "book".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x21

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x28

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x29

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x2B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x2C

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x2F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x3B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x3C

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x3D

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x3F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x5B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x5C

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x5D

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x5E

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x60

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n16.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x7B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n17.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x7C

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n18.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element name which contains an illegal ASCII NameChar. "IllegalNameChar" is followed by #x7D

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element name which has an illegal first character. An illegal first character "." is followed by "A_name-starts_with.".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element name which has an illegal first character. An illegal first character "-" is followed by "A_name-starts_with-".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element name which has an illegal first character. An illegal first character "5" is followed by "A_name-starts_with_digit".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P09-ibm09n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests an internal general entity with an invalid value. The entity "Fullname" contains "%".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P09-ibm09n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests an internal general entity with an invalid value. The entity "Fullname" contains the ampersand character.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P09-ibm09n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests an internal general entity with an invalid value. The entity "Fullname" contains the double quote character in the middle.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P09-ibm09n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 9

Tests an internal general entity with an invalid value. The closing bracket (double quote) is missing with the value of the entity "FullName".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The value of the attribute "first" contains the character "less than".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The value of the attribute "first" contains the character ampersand.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The value of the attribute "first" contains the double quote character in the middle.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The closing bracket (double quote) is missing with The value of the attribute "first".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The value of the attribute "first" contains the character "less than".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The value of the attribute "first" contains the character ampersand.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The value of the attribute "first" contains the double quote character in the middle.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P10-ibm10n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 10

Tests an attribute with an invalid value. The closing bracket (single quote) is missing with the value of the attribute "first".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P11-ibm11n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests SystemLiteral. The systemLiteral for the element "student" has a double quote character in the middle.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P11-ibm11n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests SystemLiteral. The systemLiteral for the element "student" has a single quote character in the middle.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P11-ibm11n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests SystemLiteral. The closing bracket (double quote) is missing with the systemLiteral for the element "student".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P11-ibm11n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 11

Tests SystemLiteral. The closing bracket (single quote) is missing with the systemLiteral for the element "student".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P12-ibm12n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests PubidLiteral. The closing bracket (double quote) is missing with the value of the PubidLiteral for the entity "info".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P12-ibm12n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests PubidLiteral. The value of the PubidLiteral for the entity "info" has a single quote character in the middle..

Sections [Rules]:2.3
Test ID:ibm-not-wf-P12-ibm12n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 12

Tests PubidLiteral. The closing bracket (single quote) is missing with the value of the PubidLiteral for the entity "info".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P13-ibm13n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 13

Tests PubidChar. The pubidChar of the PubidLiteral for the entity "info" contains the character "{".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P13-ibm13n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 13

Tests PubidChar. The pubidChar of the PubidLiteral for the entity "info" contains the character "~".

Sections [Rules]:2.3
Test ID:ibm-not-wf-P13-ibm13n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 13

Tests PubidChar. The pubidChar of the PubidLiteral for the entity "info" contains the character double quote in the middle.

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #x300

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x333

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x369

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x37E

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2000

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2001

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n07.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2002

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n08.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2005

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n09.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x200B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n10.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x200E

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n11.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x200F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n12.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2069

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n13.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2190

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n14.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x23FF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n15.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x280F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n16.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2A00

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n17.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2EDC

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n18.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2FED

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n19.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x2FFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n20.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0x3000

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n21.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xD800

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n22.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xD801

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n23.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xDAFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n24.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xDFFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n25.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xEFFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n26.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xF1FF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n27.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xF8FF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04-ibm04n28.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4

Tests an element with an illegal NameStartChar: #0xFFFFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #x300

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x333

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x369

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x37E

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2000

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2001

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an07.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2002

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an08.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2005

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an09.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x200B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an10.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x200E

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an11.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x200F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an12.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2069

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an13.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2190

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an14.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x23FF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an15.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x280F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an16.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2A00

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an17.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2EDC

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an18.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2FED

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an19.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x2FFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an20.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0x3000

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an21.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xD800

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an22.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xD801

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an23.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xDAFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an24.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xDFFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an25.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xEFFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an26.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xF1FF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an27.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xF8FF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P04a-ibm04an28.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 4a

Tests an element with an illegal NameChar: #0xFFFFF

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n01.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element with an illegal Name containing #0x0B

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n02.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element with an illegal Name containing #0x300

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n03.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element with an illegal Name containing #0x36F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n04.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element with an illegal Name containing #0x203F

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n05.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element with an illegal Name containing #x2040

Sections [Rules]:2.3
Test ID:ibm-not-wf-P05-ibm05n06.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 5

Tests an element with an illegal Name containing #0xB7

Sections [Rules]:2.3
Test ID:rmt-014
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a multiply sign in a name, legal in XML 1.1, illegal in XML 1.0

Sections [Rules]:2.3
Test ID:rmt-016
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a Byzantine Musical Symbol Kratimata in a name, legal in XML 1.1, illegal in XML 1.0

Sections [Rules]:2.3
Test ID:rmt-019
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has the last legal namechar in XML 1.1, illegal in XML 1.0

Sections [Rules]:2.3
Test ID:rmt-020
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has the first character after the last legal namechar in XML 1.1, illegal in both XML 1.0 and 1.1

Sections [Rules]:2.3
Test ID:rmt-021
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has the first character after the last legal namechar in XML 1.1, illegal in both XML 1.0 and 1.1

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-012
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

SGML-ism: attribute values must be quoted in all cases.

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-013
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The quotes on both ends of an attribute value must match.

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-014
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values may not contain literal '<' characters.

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-020
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values may not contain literal '&' characters except as part of an entity reference.

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-021
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values may not contain literal '&' characters except as part of an entity reference.

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-088
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values are terminated by literal quote characters, and any entity expansion is done afterwards.

Sections [Rules]:2.3 [10]
Test ID:not-wf-sa-090
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attributes may not contain a literal "<" character; this one has one because of reference expansion.

Sections [Rules]:2.3 [10]
Test ID:o-p10fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

attribute values exclude '<'

Sections [Rules]:2.3 [10]
Test ID:o-p10fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

attribute values exclude '&'

Sections [Rules]:2.3 [10]
Test ID:o-p10fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.3 [11]
Test ID:o-p11fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.3 [11]
Test ID:o-p11fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

cannot contain delimiting quotes

Sections [Rules]:2.3 [12]
Test ID:pubid01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal entity ref in public ID

Sections [Rules]:2.3 [12]
Test ID:pubid02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal characters in public ID

Sections [Rules]:2.3 [12]
Test ID:pubid03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal characters in public ID

Sections [Rules]:2.3 [12]
Test ID:pubid04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal characters in public ID

Sections [Rules]:2.3 [12]
Test ID:pubid05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML-ism: public ID without system ID

Sections [Rules]:2.3 [12]
Test ID:o-p12fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

'"' excluded

Sections [Rules]:2.3 [12]
Test ID:o-p12fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

'\' excluded

Sections [Rules]:2.3 [12]
Test ID:o-p12fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

entity references excluded

Sections [Rules]:2.3 [12]
Test ID:o-p12fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

'>' excluded

Sections [Rules]:2.3 [12]
Test ID:o-p12fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

'<' excluded

Sections [Rules]:2.3 [12]
Test ID:o-p12fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

built-in entity refs excluded

Sections [Rules]:2.3 [13]
Test ID:not-wf-sa-085
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Public IDs may not contain "[".

Sections [Rules]:2.3 [13]
Test ID:not-wf-sa-086
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Public IDs may not contain "[".

Sections [Rules]:2.3 [13]
Test ID:not-wf-sa-087
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Public IDs may not contain "[".

Sections [Rules]:2.3 [13]
Test ID:o-p12fail7
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

The public ID has a tab character, which is disallowed

Sections [Rules]:2.3 [3]
Test ID:o-p03fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail10
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail11
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail12
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail13
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail14
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail15
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail16
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail17
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail18
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail19
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail20
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail21
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail22
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail23
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail24
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail25
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail26
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail27
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail28
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail29
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail7
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail8
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [3]
Test ID:o-p03fail9
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Use of illegal character within XML document.

Sections [Rules]:2.3 [4]
Test ID:not-wf-sa-002
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Names may not start with "."; it's not a Letter.

Sections [Rules]:2.3 [4]
Test ID:not-wf-sa-140
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character '&#x309a;' is a CombiningChar, not a Letter, and so may not begin a name.

Sections [Rules]:2.3 [4]
Test ID:o-p04fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Name contains invalid character.

Sections [Rules]:2.3 [4]
Test ID:o-p04fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Name contains invalid character.

Sections [Rules]:2.3 [4]
Test ID:o-p04fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Name contains invalid character.

Sections [Rules]:2.3 [5]
Test ID:not-wf-sa-008
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Entity references must include names, which don't begin with '.' (it's not a Letter or other name start character).

Sections [Rules]:2.3 [5]
Test ID:not-wf-sa-023
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Digits are not valid name start characters.

Sections [Rules]:2.3 [5]
Test ID:not-wf-sa-024
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Digits are not valid name start characters.

Sections [Rules]:2.3 [5]
Test ID:not-wf-sa-141
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character #x0E5C is not legal in XML names.

Sections [Rules]:2.3 [5]
Test ID:o-p05fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a Name cannot start with a digit

Sections [Rules]:2.3 [5]
Test ID:o-p05fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a Name cannot start with a '.'

Sections [Rules]:2.3 [5]
Test ID:o-p05fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a Name cannot start with a "-"

Sections [Rules]:2.3 [5]
Test ID:o-p05fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a Name cannot start with a CombiningChar

Sections [Rules]:2.3 [5]
Test ID:o-p05fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a Name cannot start with an Extender

Sections [Rules]:2.3 [9]
Test ID:not-wf-sa-113
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Parameter entity values must use valid reference syntax; this reference is malformed.

Sections [Rules]:2.3 [9]
Test ID:not-wf-sa-114
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

General entity values must use valid reference syntax; this reference is malformed.

Sections [Rules]:2.3 [9]
Test ID:not-wf-sa-159
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Uses '&' unquoted in an entity declaration, which is illegal syntax for an entity reference.

Sections [Rules]:2.3 [9]
Test ID:o-p09fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

EntityValue excludes '%'

Sections [Rules]:2.3 [9]
Test ID:o-p09fail2
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

EntityValue excludes '&'

Sections [Rules]:2.3 [9]
Test ID:o-p09fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

incomplete character reference

Sections [Rules]:2.3 [9]
Test ID:o-p09fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.3 [9]
Test ID:o-p09fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.4
Test ID:ibm-not-wf-P14-ibm14n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 14

Tests CharData. The content of the element "student" contains the character "[[>".

Sections [Rules]:2.4
Test ID:ibm-not-wf-P14-ibm14n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 14

Tests CharData. The content of the element "student" contains the character "less than".

Sections [Rules]:2.4
Test ID:ibm-not-wf-P14-ibm14n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 14

Tests CharData. The content of the element "student" contains the character ampersand.

Sections [Rules]:2.4 [14]
Test ID:not-wf-sa-025
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Text may not contain a literal ']]>' sequence.

Sections [Rules]:2.4 [14]
Test ID:not-wf-sa-026
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Text may not contain a literal ']]>' sequence.

Sections [Rules]:2.4 [14]
Test ID:not-wf-sa-029
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Text may not contain a literal ']]>' sequence.

Sections [Rules]:2.4 [14]
Test ID:o-p14fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

'<' excluded

Sections [Rules]:2.4 [14]
Test ID:o-p14fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

'&' excluded

Sections [Rules]:2.4 [14]
Test ID:o-p14fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

"]]>" excluded

Sections [Rules]:2.5
Test ID:ibm-not-wf-P15-ibm15n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment. The text of the second comment contains the character "-".

Sections [Rules]:2.5
Test ID:ibm-not-wf-P15-ibm15n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment. The second comment has a wrong closing sequence "-(greater than)".

Sections [Rules]:2.5
Test ID:ibm-not-wf-P15-ibm15n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment. The second comment has a wrong beginning sequence "(less than)!-".

Sections [Rules]:2.5
Test ID:ibm-not-wf-P15-ibm15n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 15

Tests comment. The closing sequence is missing with the second comment.

Sections [Rules]:2.5 [15]
Test ID:not-wf-sa-027
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Comments must be terminated with "-->".

Sections [Rules]:2.5 [15]
Test ID:sgml03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Comments may not contain "--"

Sections [Rules]:2.5 [15]
Test ID:o-p15fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

comments can't end in '-'

Sections [Rules]:2.5 [15]
Test ID:o-p15fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

one comment per comment (contrasted with SGML)

Sections [Rules]:2.5 [15]
Test ID:o-p15fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

can't include 2 or more adjacent '-'s

Sections [Rules]:2.5 [16]
Test ID:not-wf-sa-006
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML comments may not contain "--"

Sections [Rules]:2.5 [16]
Test ID:not-wf-sa-070
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML comments may not contain "--"

Sections [Rules]:2.6
Test ID:ibm-not-wf-P16-ibm16n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI. The content of the PI includes the sequence "(less than)?".

Sections [Rules]:2.6
Test ID:ibm-not-wf-P16-ibm16n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI. The PITarget is missing in the PI.

Sections [Rules]:2.6
Test ID:ibm-not-wf-P16-ibm16n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI. The PI has a wrong closing sequence ">".

Sections [Rules]:2.6
Test ID:ibm-not-wf-P16-ibm16n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 16

Tests PI. The closing sequence is missing in the PI.

Sections [Rules]:2.6
Test ID:ibm-not-wf-P17-ibm17n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 17

Tests PITarget. The PITarget contains the string "XML".

Sections [Rules]:2.6
Test ID:ibm-not-wf-P17-ibm17n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 17

Tests PITarget. The PITarget contains the string "xML".

Sections [Rules]:2.6
Test ID:ibm-not-wf-P17-ibm17n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 17

Tests PITarget. The PITarget contains the string "xml".

Sections [Rules]:2.6
Test ID:ibm-not-wf-P17-ibm17n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 17

Tests PITarget. The PITarget contains the string "xmL".

Sections [Rules]:2.6 [16]
Test ID:not-wf-sa-003
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Processing Instruction target name is required.

Sections [Rules]:2.6 [16]
Test ID:not-wf-sa-004
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

SGML-ism: processing instructions end in '?>' not '>'.

Sections [Rules]:2.6 [16]
Test ID:not-wf-sa-005
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Processing instructions end in '?>' not '?'.

Sections [Rules]:2.6 [16]
Test ID:not-wf-sa-028
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Processing instructions must end with '?>'.

Sections [Rules]:2.6 [16]
Test ID:pi
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

No space between PI target name and data

Sections [Rules]:2.6 [16]
Test ID:o-p16fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

"xml" is an invalid PITarget

Sections [Rules]:2.6 [16]
Test ID:o-p16fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

a PITarget must be present

Sections [Rules]:2.6 [16]
Test ID:o-p16fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S after PITarget is required

Sections [Rules]:2.6 [17]
Test ID:not-wf-sa-157
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

'<?xmL ...?>' is not a legal processing instruction target name.

Sections [Rules]:2.6 [17]
Test ID:not-wf-not-sa-002
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Processing instruction target names may not be "XML" in any combination of cases.

Sections [Rules]:2.6 [17]
Test ID:not-wf-ext-sa-003
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Only one text declaration is permitted; a second one looks like an illegal processing instruction (target names of "xml" in any case are not allowed).

Sections [Rules]:2.7
Test ID:ibm-not-wf-P18-ibm18n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 18

Tests CDSect. The CDStart is missing in the CDSect in the content of element "student".

Sections [Rules]:2.7
Test ID:ibm-not-wf-P18-ibm18n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 18

Tests CDSect. The CDEnd is missing in the CDSect in the content of element "student".

Sections [Rules]:2.7
Test ID:ibm-not-wf-P19-ibm19n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 19

Tests CDStart. The CDStart contains a lower case string "cdata".

Sections [Rules]:2.7
Test ID:ibm-not-wf-P19-ibm19n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 19

Tests CDStart. The CDStart contains an extra character "[".

Sections [Rules]:2.7
Test ID:ibm-not-wf-P19-ibm19n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 19

Tests CDStart. The CDStart contains a wrong character "?".

Sections [Rules]:2.7
Test ID:ibm-not-wf-P20-ibm20n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 20

Tests CDATA with an illegal sequence. The CDATA contains the string "[[>".

Sections [Rules]:2.7
Test ID:ibm-not-wf-P21-ibm21n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 21

Tests CDEnd. One "]" is missing in the CDEnd.

Sections [Rules]:2.7
Test ID:ibm-not-wf-P21-ibm21n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 21

Tests CDEnd. An extra "]" is placed in the CDEnd.

Sections [Rules]:2.7
Test ID:ibm-not-wf-P21-ibm21n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 21

Tests CDEnd. A wrong character ")" is placed in the CDEnd.

Sections [Rules]:2.7
Test ID:not-wf-sa-105
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid placement of CDATA section.

Sections [Rules]:2.7 [18]
Test ID:not-wf-sa-017
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

CDATA sections need a terminating ']]>'.

Sections [Rules]:2.7 [18]
Test ID:not-wf-sa-051
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

CDATA is invalid at top level of document.

Sections [Rules]:2.7 [18]
Test ID:not-wf-sa-128
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid CDATA syntax.

Sections [Rules]:2.7 [18]
Test ID:o-p18fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no space before "CDATA"

Sections [Rules]:2.7 [18]
Test ID:o-p18fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no space after "CDATA"

Sections [Rules]:2.7 [18]
Test ID:o-p18fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

CDSect's can't nest

Sections [Rules]:2.7 [19]
Test ID:not-wf-sa-018
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

CDATA sections begin with a literal '<![CDATA[', no space.

Sections [Rules]:2.7 [19]
Test ID:not-wf-sa-108
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

No space in '<![CDATA['.

Sections [Rules]:2.7 [19]
Test ID:not-wf-sa-112
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

CDATA sections start '<![CDATA[', not '<!cdata['.

Sections [Rules]:2.8
Test ID:not-wf-sa-160
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Violates the PEs in Internal Subset WFC by using a PE reference within a declaration.

Sections [Rules]:2.8
Test ID:not-wf-sa-161
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Violates the PEs in Internal Subset WFC by using a PE reference within a declaration.

Sections [Rules]:2.8
Test ID:not-wf-sa-162
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Violates the PEs in Internal Subset WFC by using a PE reference within a declaration.

Sections [Rules]:2.8
Test ID:not-wf-not-sa-009
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

This test violates WFC:PE Between Declarations in Production 28a. The last character of a markup declaration is not contained in the same parameter-entity text replacement.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P22-ibm22n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with wrong field ordering. The XMLDecl occurs after the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P22-ibm22n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with wrong field ordering. The Misc (comment) occurs before the XMLDecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P22-ibm22n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 22

Tests prolog with wrong field ordering. The XMLDecl occurs after the DTD and a comment. The other comment occurs before the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P23-ibm23n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with a required field missing. The Versioninfo is missing in the XMLDecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P23-ibm23n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with wrong field ordering. The VersionInfo occurs after the EncodingDecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P23-ibm23n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with wrong field ordering. The VersionInfo occurs after the SDDecl and the SDDecl occurs after the VersionInfo.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P23-ibm23n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with wrong key word. An upper case string "XML" is used as the key word in the XMLDecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P23-ibm23n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with a wrong closing sequence ">".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P23-ibm23n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 23

Tests XMLDecl with a wrong opening sequence "(less than)!".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with a required field missing. The VersionNum is missing in the VersionInfo in the XMLDecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with a required field missing. The white space is missing between the key word "xml" and the VersionInfo in the XMLDecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with a required field missing. The "=" (equal sign) is missing between the key word "version" and the VersionNum.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with wrong field ordering. The VersionNum occurs before "=" and "version".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with wrong field ordering. The "=" occurs after "version" and the VersionNum.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with the wrong key word "Version".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with the wrong key word "versioN".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with mismatched quotes around the VersionNum. version = '1.0" is used as the VersionInfo.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P24-ibm24n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 24

Tests VersionInfo with mismatched quotes around the VersionNum. The closing bracket for the VersionNum is missing.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P25-ibm25n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 25

Tests eq with a wrong key word "==".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P25-ibm25n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 25

Tests eq with a wrong key word "eq".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P26-ibm26n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 26

Tests VersionNum with an illegal character "#".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P27-ibm27n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 27

Tests type of Misc. An element declaration is used as a type of Misc After the element "animal".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with a required field missing. The Name "animal" is missing in the doctypedecl.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with wrong field ordering. The Name "animal" occurs after the markup declarations inside the "[]".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with wrong field ordering. The Name "animal" occurs after the markup declarations inside the "[]".

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with general entity reference.The "(ampersand)generalE" occurs in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with wrong key word. A wrong key word "DOCtYPE" occurs on line 2.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with mismatched brackets. The closing bracket "]" of the DTD is missing.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with wrong bracket. The opening bracket "}" occurs in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28-ibm28n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 28

Tests doctypedecl with wrong opening sequence. The opening sequence "(less than)?DOCTYPE" occurs in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P28a-ibm28an01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 28a

This test violates WFC:PE Between Declarations in Production 28a. The last character of a markup declaration is not contained in the same parameter-entity text replacement.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests markupdecl with an illegal markup declaration. A XMLDecl occurs inside the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC "PEs in Internal Subset". A PE reference occurs inside an elementdecl in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC "PEs in Internal Subset". A PE reference occurs inside an ATTlistDecl in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC "PEs in Internal Subset". A PE reference occurs inside an EntityDecl in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC "PEs in Internal Subset". A PE reference occurs inside a PI in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC "PEs in Internal Subset". A PE reference occurs inside a comment in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P29-ibm29n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 29

Tests WFC "PEs in Internal Subset". A PE reference occurs inside a NotationDecl in the DTD.

Sections [Rules]:2.8
Test ID:ibm-not-wf-P30-ibm30n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 30

Tests extSubset with wrong field ordering. In the file "ibm30n01.dtd", the TextDecl occurs after the extSubsetDecl (the element declaration).

Sections [Rules]:2.8
Test ID:ibm-not-wf-P31-ibm31n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 31

Tests extSubsetDecl with an illegal field. A general entity reference occurs in file "ibm31n01.dtd".

Sections [Rules]:2.8
Test ID:sgml02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

XML declaration must be at the very beginning of a document; it"s not a processing instruction

Sections [Rules]:2.8 [22]
Test ID:not-wf-sa-147
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML Declaration may not be preceded by whitespace.

Sections [Rules]:2.8 [22]
Test ID:not-wf-sa-148
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML Declaration may not be preceded by comments or whitespace.

Sections [Rules]:2.8 [22]
Test ID:not-wf-sa-152
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML declarations must include the "version=..." string.

Sections [Rules]:2.8 [22]
Test ID:o-p22fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

prolog must start with XML decl

Sections [Rules]:2.8 [22]
Test ID:o-p22fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

prolog must start with XML decl

Sections [Rules]:2.8 [23]
Test ID:not-wf-sa-095
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

VersionInfo must come before EncodingDecl.

Sections [Rules]:2.8 [23]
Test ID:not-wf-sa-098
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Only one "version=..." string may appear in an XML declaration.

Sections [Rules]:2.8 [23]
Test ID:not-wf-sa-099
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Only three pseudo-attributes are in the XML declaration, and "valid=..." is not one of them.

Sections [Rules]:2.8 [23]
Test ID:o-p23fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

"xml" must be lower-case

Sections [Rules]:2.8 [23]
Test ID:o-p23fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

VersionInfo must be supplied

Sections [Rules]:2.8 [23]
Test ID:o-p23fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

VersionInfo must come first

Sections [Rules]:2.8 [23]
Test ID:o-p23fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

SDDecl must come last

Sections [Rules]:2.8 [23]
Test ID:o-p23fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no SGML-type PIs

Sections [Rules]:2.8 [23]
Test ID:o-p39fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

XML declarations must be correctly terminated

Sections [Rules]:2.8 [23]
Test ID:o-p39fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

XML declarations must be correctly terminated

Sections [Rules]:2.8 [24]
Test ID:not-wf-sa-094
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Prolog VERSION must be lowercase.

Sections [Rules]:2.8 [24]
Test ID:not-wf-sa-097
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Both quotes surrounding VersionNum must be the same.

Sections [Rules]:2.8 [24]
Test ID:o-p24fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.8 [24]
Test ID:o-p24fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.8 [25]
Test ID:o-p25fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Comment is illegal in VersionInfo.

Sections [Rules]:2.8 [26]
Test ID:not-wf-sa-102
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Provides an illegal XML version number; spaces are illegal.

Sections [Rules]:2.8 [26]
Test ID:o-p26fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal character in VersionNum.

Sections [Rules]:2.8 [26]
Test ID:o-p26fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal character in VersionNum.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-036
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Text may not appear after the root element.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-037
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character references may not appear after the root element.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-040
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Provides two document elements.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-041
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Provides two document elements.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-043
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Provides #PCDATA text after the document element.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-044
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Provides two document elements.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-048
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Provides a CDATA section after the roor element.

Sections [Rules]:2.8 [27]
Test ID:not-wf-sa-151
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML declarations may not follow document content.

Sections [Rules]:2.8 [27]
Test ID:o-p27fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

References aren't allowed in Misc, even if they would resolve to valid Misc.

Sections [Rules]:2.8 [28]
Test ID:not-wf-sa-055
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid Document Type Definition format.

Sections [Rules]:2.8 [28]
Test ID:not-wf-sa-056
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid Document Type Definition format - misplaced comment.

Sections [Rules]:2.8 [28]
Test ID:not-wf-sa-107
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid document type declaration. CDATA alone is invalid.

Sections [Rules]:2.8 [28]
Test ID:not-wf-sa-149
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML Declaration may not be within a DTD.

Sections [Rules]:2.8 [28]
Test ID:o-p28fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only declarations in DTD.

Sections [Rules]:2.8 [29]
Test ID:not-wf-sa-063
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Conditional sections may only appear in the external DTD subset.

Sections [Rules]:2.8 [29]
Test ID:o-p29fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

A processor must not pass unknown declaration types.

Sections [Rules]:2.8 [30]
Test ID:o-p30fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

An XML declaration is not the same as a TextDecl

Sections [Rules]:2.8 [31]
Test ID:o-p31fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

external subset excludes doctypedecl

Sections [Rules]:2.8 2.6 [23, 17]
Test ID:not-wf-sa-154
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

'<?XML ...?>' is neither an XML declaration nor a legal processing instruction target name.

Sections [Rules]:2.8 2.6 [23, 17]
Test ID:not-wf-sa-155
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

'<?xmL ...?>' is neither an XML declaration nor a legal processing instruction target name.

Sections [Rules]:2.8 2.6 [23, 17]
Test ID:not-wf-sa-156
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

'<?xMl ...?>' is neither an XML declaration nor a legal processing instruction target name.

Sections [Rules]:2.8 4.3.4
Test ID:rmt-001
RECOMMENDATION:XML1.1
Entities:parameter
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

External subset has later version number

Sections [Rules]:2.8 4.3.4
Test ID:rmt-002
RECOMMENDATION:XML1.1
Entities:parameter
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

External PE has later version number

Sections [Rules]:2.8 4.3.4
Test ID:rmt-003
RECOMMENDATION:XML1.1
Entities:general
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

External general entity has later version number

Sections [Rules]:2.8 4.3.4
Test ID:rmt-004
RECOMMENDATION:XML1.1
Entities:general
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

External general entity has later version number (no decl means 1.0)

Sections [Rules]:2.8 4.3.4
Test ID:rmt-005
RECOMMENDATION:XML1.1
Entities:general
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Indirect external general entity has later version number

Sections [Rules]:2.9
Test ID:not-wf-sa03
RECOMMENDATION:XML1.0
Entities:parameter
Collection:Sun Microsystems XML Tests

Tests the Entity Declared WFC, ensuring that a reference to externally defined entity causes a well-formedness error.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with a required field missing. The leading white space is missing with the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with a required field missing. The "=" sign is missing in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with wrong key word. The word "Standalone" occurs in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with wrong key word. The word "Yes" occurs in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with wrong key word. The word "YES" occurs in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with wrong key word. The word "No" occurs in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with wrong key word. The word "NO" occurs in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 32

Tests SDDecl with wrong field ordering. The "=" sign occurs after the key word "yes" in the SDDecl in the XMLDecl.

Sections [Rules]:2.9
Test ID:ibm-not-wf-P32-ibm32n09.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 32

This is test violates WFC: Entity Declared in P68. The standalone document declaration has the value yes, BUT there is an external markup declaration of an entity (other than amp, lt, gt, apos, quot), and references to this entity appear in the document.

Sections [Rules]:2.9 [32]
Test ID:not-wf-sa-096
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required before the standalone declaration.

Sections [Rules]:2.9 [32]
Test ID:not-wf-sa-100
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Only "yes" and "no" are permitted as values of "standalone".

Sections [Rules]:2.9 [32]
Test ID:o-p32fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.9 [32]
Test ID:o-p32fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quote types must match

Sections [Rules]:2.9 [32]
Test ID:o-p32fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

initial S is required

Sections [Rules]:2.9 [32]
Test ID:o-p32fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quotes are required

Sections [Rules]:2.9 [32]
Test ID:o-p32fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

yes or no must be lower case

Sections [Rules]:3
Test ID:not-wf-sa-039
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the Element Type Match WFC - end tag name must match start tag name.

Sections [Rules]:3
Test ID:ibm-not-wf-P39-ibm39n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with a required field missing. The ETag is missing for the element "root".

Sections [Rules]:3
Test ID:ibm-not-wf-P39-ibm39n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with a required field missing. The STag is missing for the element "root".

Sections [Rules]:3
Test ID:ibm-not-wf-P39-ibm39n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with required fields missing. Both the content and the ETag are missing in the element "root".

Sections [Rules]:3
Test ID:ibm-not-wf-P39-ibm39n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with required fields missing. Both the content and the STag are missing in the element "root".

Sections [Rules]:3
Test ID:ibm-not-wf-P39-ibm39n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with wrong field ordering. The STag and the ETag are swapped in the element "root".

Sections [Rules]:3
Test ID:ibm-not-wf-P39-ibm39n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 39

Tests element with wrong field ordering. The content occurs after the ETag of the element "root".

Sections [Rules]:3
Test ID:rmt-ns10-013
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Bad QName syntax: multiple colons

Sections [Rules]:3
Test ID:rmt-ns10-014
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Bad QName syntax: colon at end

Sections [Rules]:3
Test ID:rmt-ns10-015
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Bad QName syntax: colon at start

Sections [Rules]:3.1
Test ID:not-wf-sa-038
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the "Unique Att Spec" WF constraint by providing multiple values for an attribute.

Sections [Rules]:3.1
Test ID:not-wf-sa-081
RECOMMENDATION:XML1.0
Entities:general
Collection:James Clark XMLTEST cases, 18-Nov-1998

This tests the No External Entity References WFC, since the entity is referred to within an attribute.

Sections [Rules]:3.1
Test ID:not-wf-sa-082
RECOMMENDATION:XML1.0
Entities:general
Collection:James Clark XMLTEST cases, 18-Nov-1998

This tests the No External Entity References WFC, since the entity is referred to within an attribute.

Sections [Rules]:3.1
Test ID:ibm-not-wf-P40-ibm40n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 40

Tests STag with a required field missing. The Name "root" is in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P40-ibm40n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 40

Tests STag with a required field missing. The white space between the Name "root" and the attribute "attr1" is missing in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P40-ibm40n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 40

Tests STag with wrong field ordering. The Name "root" occurs after the attribute "attr1" in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P40-ibm40n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 40

Tests STag with a wrong opening sequence. The string "(less than)!" is used as the opening sequence for the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P40-ibm40n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 40

Tests STag with duplicate attribute names. The attribute name "attr1" occurs twice in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with a required field missing. The attribute name is missing in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with a required field missing. The "=" is missing between the attribute name and the attribute value in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with a required field missing. The AttValue is missing in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with a required field missing. The Name and the "=" are missing in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with a required field missing. The "=" and the AttValue are missing in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with a required field missing. The Name and the AttValue are missing in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with wrong field ordering. The "=" occurs after the Name and the AttValue in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with wrong field ordering. The Name and the AttValue are swapped in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute with wrong field ordering. The "=" occurs before the Name and the AttValue in the Attribute in the STag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute against WFC "no external entity references". A direct references to the external entity "aExternal" is contained in the value of the attribute "attr1".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute against WFC "no external entity references". A indirect references to the external entity "aExternal" is contained in the value of the attribute "attr1".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute against WFC "no external entity references". A direct references to the external unparsed entity "aImage" is contained in the value of the attribute "attr1".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute against WFC "No (less that) character in Attribute Values". The character "less than" is contained in the value of the attribute "attr1".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P41-ibm41n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 41

Tests Attribute against WFC "No (less than) in Attribute Values". The character "less than" is contained in the value of the attribute "attr1" through indirect internal entity reference.

Sections [Rules]:3.1
Test ID:ibm-not-wf-P42-ibm42n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 42

Tests ETag with a required field missing. The Name is missing in the ETag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P42-ibm42n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 42

Tests ETag with a wrong beginning sequence. The string "(less than)\" is used as a beginning sequence of the ETag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P42-ibm42n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 42

Tests ETag with a wrong beginning sequence. The string "less than" is used as a beginning sequence of the ETag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P42-ibm42n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 42

Tests ETag with a wrong structure. An white space occurs between The beginning sequence and the Name of the ETag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P42-ibm42n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 42

Tests ETag with a wrong structure. The ETag of the element "root" contains an Attribute (attr1="any").

Sections [Rules]:3.1
Test ID:ibm-not-wf-P43-ibm43n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 43

Tests element content with a wrong option. A NotationDecl is used as the content of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P43-ibm43n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 43

Tests element content with a wrong option. A elementdecl is used as the content of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P43-ibm43n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 43

Tests element content with a wrong option. An elementdecl is used as the content of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P43-ibm43n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 43

Tests element content with a wrong option. An AttlistDecl is used as the content of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P44-ibm44n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 44

Tests EmptyElemTag with a required field missing. The Name "root" is missing in the EmptyElemTag.

Sections [Rules]:3.1
Test ID:ibm-not-wf-P44-ibm44n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 44

Tests EmptyElemTag with wrong field ordering. The Attribute (attri1 = "any") occurs before the name of the element "root" in the EmptyElemTag.

Sections [Rules]:3.1
Test ID:ibm-not-wf-P44-ibm44n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 44

Tests EmptyElemTag with wrong closing sequence. The string "\>" is used as the closing sequence in the EmptyElemtag of the element "root".

Sections [Rules]:3.1
Test ID:ibm-not-wf-P44-ibm44n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 44

Tests EmptyElemTag which against the WFC "Unique Att Spec". The attribute name "attr1" occurs twice in the EmptyElemTag of the element "root".

Sections [Rules]:3.1 [40]
Test ID:not-wf-sa-046
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

This start (or empty element) tag was not terminated correctly.

Sections [Rules]:3.1 [40]
Test ID:not-wf-sa-049
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Missing start tag

Sections [Rules]:3.1 [40]
Test ID:attlist10
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Whitespace required between attributes

Sections [Rules]:3.1 [40]
Test ID:o-p40fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required between attributes

Sections [Rules]:3.1 [40]
Test ID:o-p40fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

tags start with names, not nmtokens

Sections [Rules]:3.1 [40]
Test ID:o-p40fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

tags start with names, not nmtokens

Sections [Rules]:3.1 [40]
Test ID:o-p40fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no space before name

Sections [Rules]:3.1 [41]
Test ID:not-wf-sa-001
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values must start with attribute names, not "?".

Sections [Rules]:3.1 [41]
Test ID:not-wf-sa-011
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

SGML-ism: attribute values must be explicitly assigned a value, it can't act as a boolean toggle.

Sections [Rules]:3.1 [41]
Test ID:not-wf-sa-015
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values need a value, not just an equals sign.

Sections [Rules]:3.1 [41]
Test ID:not-wf-sa-016
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Attribute values need an associated name.

Sections [Rules]:3.1 [41]
Test ID:not-wf-sa-178
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax matching double quote is missing.

Sections [Rules]:3.1 [41]
Test ID:o-p41fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

quotes are required (contrast with SGML)

Sections [Rules]:3.1 [41]
Test ID:o-p41fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

attribute name is required (contrast with SGML)

Sections [Rules]:3.1 [41]
Test ID:o-p41fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Eq required

Sections [Rules]:3.1 [42]
Test ID:not-wf-sa-019
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

End tags may not be abbreviated as '</>'.

Sections [Rules]:3.1 [42]
Test ID:not-wf-sa-042
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid End Tag

Sections [Rules]:3.1 [42]
Test ID:not-wf-sa-053
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

End tag does not match start tag.

Sections [Rules]:3.1 [42]
Test ID:element00
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

EOF in middle of incomplete ETAG

Sections [Rules]:3.1 [42]
Test ID:element01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

EOF in middle of incomplete ETAG

Sections [Rules]:3.1 [42]
Test ID:o-p42fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no space before name

Sections [Rules]:3.1 [42]
Test ID:o-p42fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

cannot end with "/>"

Sections [Rules]:3.1 [42]
Test ID:o-p42fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no NET (contrast with SGML)

Sections [Rules]:3.1 [43]
Test ID:not-wf-sa-035
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The '<' character is a markup delimiter and must start an element, CDATA section, PI, or comment.

Sections [Rules]:3.1 [43]
Test ID:not-wf-sa-111
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Entiry reference must be in content of element not Start-tag.

Sections [Rules]:3.1 [43]
Test ID:not-wf-sa-150
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

XML declarations may not be within element content.

Sections [Rules]:3.1 [43]
Test ID:element02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal markup (<%@ ... %>)

Sections [Rules]:3.1 [43]
Test ID:element03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal markup (<% ... %>)

Sections [Rules]:3.1 [43]
Test ID:element04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal markup (<!ELEMENT ... >)

Sections [Rules]:3.1 [43]
Test ID:o-p43fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no non-comment declarations

Sections [Rules]:3.1 [43]
Test ID:o-p43fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no conditional sections

Sections [Rules]:3.1 [43]
Test ID:o-p43fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no conditional sections

Sections [Rules]:3.1 [44]
Test ID:not-wf-sa-045
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid Empty Element Tag

Sections [Rules]:3.1 [44]
Test ID:not-wf-sa-047
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid empty element tag invalid whitespace

Sections [Rules]:3.1 [44]
Test ID:not-wf-sa-186
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Whitespace is required between attribute/value pairs.

Sections [Rules]:3.1 [44]
Test ID:attlist11
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Whitespace required between attributes

Sections [Rules]:3.1 [44]
Test ID:o-p44fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal space before Empty element tag.

Sections [Rules]:3.1 [44]
Test ID:o-p44fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal space after Empty element tag.

Sections [Rules]:3.1 [44]
Test ID:o-p44fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal comment in Empty element tag.

Sections [Rules]:3.1 [44]
Test ID:o-p44fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Whitespace required between attributes.

Sections [Rules]:3.1 [44]
Test ID:o-p44fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Duplicate attribute name is illegal.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with a required field missing. The Name is missing in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with a required field missing. The white space is missing between "aEle" and "(#PCDATA)" in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with a required field missing. The contentspec is missing in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with a required field missing. The contentspec and the white space is missing in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with a required field missing. The Name, the white space, and the contentspec are missing in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with wrong field ordering. The Name occurs after the contentspec in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with wrong beginning sequence. The string "(less than)ELEMENT" is used as the beginning sequence in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with wrong key word. The string "Element" is used as the key word in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P45-ibm45n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 45

Tests elementdecl with wrong key word. The string "element" is used as the key word in the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P46-ibm46n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 46

Tests contentspec with wrong key word. the string "empty" is used as the key word in the contentspec of the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P46-ibm46n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 46

Tests contentspec with wrong key word. the string "Empty" is used as the key word in the contentspec of the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P46-ibm46n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 46

Tests contentspec with wrong key word. the string "Any" is used as the key word in the contentspec of the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P46-ibm46n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 46

Tests contentspec with wrong key word. the string "any" is used as the key word in the contentspec of the second elementdecl in the DTD.

Sections [Rules]:3.2
Test ID:ibm-not-wf-P46-ibm46n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 46

Tests contentspec with a wrong option. The string "#CDATA" is used as the contentspec in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:not-wf-sa-133
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Illegal whitespace before optional character causes syntax error.

Sections [Rules]:3.2.1
Test ID:not-wf-sa-134
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Illegal whitespace before optional character causes syntax error.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P47-ibm47n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests children with a required field missing. The "+" is used as the choice or seq field in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P47-ibm47n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests children with a required field missing. The "*" is used as the choice or seq field in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P47-ibm47n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests children with a required field missing. The "?" is used as the choice or seq field in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P47-ibm47n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests children with wrong field ordering. The "*" occurs before the seq field (a,a) in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P47-ibm47n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests children with wrong field ordering. The "+" occurs before the choice field (a|a) in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P47-ibm47n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 47

Tests children with wrong key word. The "^" occurs after the seq field in the second elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with a required fields missing. The field Name|choice|seq is missing in the second cp in the choice field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with a required fields missing. The field Name|choice|seq is missing in the cp in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with a required fields missing. The field Name|choice|seq is missing in the first cp in the choice field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with wrong field ordering. The "+" occurs before the seq (a,a) in the first cp in the choice field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with wrong field ordering. The "*" occurs before the choice (a|b) in the first cp in the seq field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with wrong field ordering. The "?" occurs before the Name "a" in the second cp in the seq field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P48-ibm48n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 48

Tests cp with wrong key word. The "^" occurs after the Name "a" in the first cp in the choice field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P49-ibm49n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests choice with a required field missing. The two cps are missing in the choice field in the third elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P49-ibm49n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests choice with a required field missing. The third cp is missing in the choice field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P49-ibm49n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests choice with a wrong separator. The "!" is used as the separator in the choice field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P49-ibm49n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests choice with a required field missing. The separator "|" is missing in the choice field (a b)+ in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P49-ibm49n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests choice with an extra separator. An extra "|" occurs between a and b in the choice field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P49-ibm49n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 49

Tests choice with a required field missing. The closing bracket ")" is missing in the choice field (a |b * in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with a required field missing. The two cps are missing in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with a required field missing. The third cp is missing in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with a wrong separator. The "|" is used as the separator between a and b in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with a wrong separator. The "." is used as the separator between a and b in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with an extra separator. An extra "," occurs between (a|b) and a in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with a required field missing. The separator between (a|b) and (b|a) is missing in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1
Test ID:ibm-not-wf-P50-ibm50n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 50

Tests seq with wrong closing bracket. The "]" is used as the closing bracket in the seq field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.1 [46]
Test ID:not-wf-sa-139
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The element-content model should not be empty.

Sections [Rules]:3.2.1 [47]
Test ID:not-wf-sa-122
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax mixed connectors are used.

Sections [Rules]:3.2.1 [47]
Test ID:not-wf-sa-135
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid character used as connector.

Sections [Rules]:3.2.1 [47]
Test ID:sgml13
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML Unordered content models not allowed

Sections [Rules]:3.2.1 [47]
Test ID:o-p47fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Invalid operator '|' must match previous operator ','

Sections [Rules]:3.2.1 [47]
Test ID:o-p47fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal character '-' in Element-content model

Sections [Rules]:3.2.1 [47]
Test ID:o-p47fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Optional character must follow a name or list

Sections [Rules]:3.2.1 [47]
Test ID:o-p47fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal space before optional character

Sections [Rules]:3.2.1 [48]
Test ID:not-wf-sa-123
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax mismatched parenthesis.

Sections [Rules]:3.2.1 [48]
Test ID:not-wf-sa-138
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax for content particle.

Sections [Rules]:3.2.1 [48]
Test ID:content01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

No whitespace before "?" in content model

Sections [Rules]:3.2.1 [48]
Test ID:content02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

No whitespace before "*" in content model

Sections [Rules]:3.2.1 [48]
Test ID:content03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

No whitespace before "+" in content model

Sections [Rules]:3.2.1 [48]
Test ID:o-p48fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal space before optional character

Sections [Rules]:3.2.1 [48]
Test ID:o-p48fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Illegal space before optional character

Sections [Rules]:3.2.1 [49]
Test ID:o-p49fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

connectors must match

Sections [Rules]:3.2.1 [50]
Test ID:not-wf-sa-132
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax mixed connectors used.

Sections [Rules]:3.2.1 [50]
Test ID:o-p50fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

connectors must match

Sections [Rules]:3.2.1 [55]
Test ID:nwf-dtd00
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Comma mandatory in content model

Sections [Rules]:3.2.1 [55]
Test ID:nwf-dtd01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Can't mix comma and vertical bar in content models

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with a wrong key word. The string "#pcdata" is used as the key word in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with wrong field ordering. The field #PCDATA does not occur as the first component in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with a separator missing. The separator "|" is missing in between #PCDATA and a in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with a wrong key word. The string "#CDATA" is used as the key word in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with a required field missing. The "*" is missing after the ")" in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with wrong closing bracket. The "]" is used as the closing bracket in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2
Test ID:ibm-not-wf-P51-ibm51n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 51

Tests Mixed with a required field missing. The closing bracket ")" is missing after (#PCDATA in the Mixed field in the fourth elementdecl in the DTD.

Sections [Rules]:3.2.2 [51]
Test ID:not-wf-sa-124
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid format of Mixed-content declaration.

Sections [Rules]:3.2.2 [51]
Test ID:not-wf-sa-125
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax extra set of parenthesis not necessary.

Sections [Rules]:3.2.2 [51]
Test ID:not-wf-sa-126
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax Mixed-content must be defined as zero or more.

Sections [Rules]:3.2.2 [51]
Test ID:not-wf-sa-127
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax Mixed-content must be defined as zero or more.

Sections [Rules]:3.2.2 [51]
Test ID:not-wf-sa-183
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Mixed content declarations may not include content particles.

Sections [Rules]:3.2.2 [51]
Test ID:not-wf-sa-184
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

In mixed content models, element names must not be parenthesized.

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

occurrence on #PCDATA group must be *

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

occurrence on #PCDATA group must be *

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

#PCDATA must come first

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

occurrence on #PCDATA group must be *

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only '|' connectors

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Only '|' connectors and occurrence on #PCDATA group must be *

Sections [Rules]:3.2.2 [51]
Test ID:o-p51fail7
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no nested groups

Sections [Rules]:3.2 [45]
Test ID:not-wf-sa-057
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

This isn't SGML; comments can't exist in declarations.

Sections [Rules]:3.2 [45]
Test ID:not-wf-sa-129
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax for Element Type Declaration.

Sections [Rules]:3.2 [45]
Test ID:not-wf-sa-130
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax for Element Type Declaration.

Sections [Rules]:3.2 [45]
Test ID:not-wf-sa-131
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax for Element Type Declaration.

Sections [Rules]:3.2 [45]
Test ID:not-wf-sa-136
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tag omission is invalid in XML.

Sections [Rules]:3.2 [45]
Test ID:not-wf-sa-137
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required before a content model.

Sections [Rules]:3.2 [45]
Test ID:sgml05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

ELEMENT declarations apply to only one element, unlike SGML

Sections [Rules]:3.2 [45]
Test ID:sgml07
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML Tag minimization specifications are not allowed

Sections [Rules]:3.2 [45]
Test ID:sgml08
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML Tag minimization specifications are not allowed

Sections [Rules]:3.2 [45]
Test ID:sgml09
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML Content model exception specifications are not allowed

Sections [Rules]:3.2 [45]
Test ID:sgml10
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML Content model exception specifications are not allowed

Sections [Rules]:3.2 [45]
Test ID:o-p45fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

ELEMENT must be upper case.

Sections [Rules]:3.2 [45]
Test ID:o-p45fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S before contentspec is required.

Sections [Rules]:3.2 [45]
Test ID:o-p45fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only one content spec

Sections [Rules]:3.2 [45]
Test ID:o-p45fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no comments in declarations (contrast with SGML)

Sections [Rules]:3.2 [46]
Test ID:sgml11
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

CDATA is not a valid content model spec

Sections [Rules]:3.2 [46]
Test ID:sgml12
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

RCDATA is not a valid content model spec

Sections [Rules]:3.2 [46]
Test ID:o-p46fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no parens on declared content

Sections [Rules]:3.2 [46]
Test ID:o-p46fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no inclusions (contrast with SGML)

Sections [Rules]:3.2 [46]
Test ID:o-p46fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no exclusions (contrast with SGML)

Sections [Rules]:3.2 [46]
Test ID:o-p46fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no space before occurrence

Sections [Rules]:3.2 [46]
Test ID:o-p46fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

single group

Sections [Rules]:3.2 [46]
Test ID:o-p46fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

can't be both declared and modeled

Sections [Rules]:3.3
Test ID:ibm-not-wf-P52-ibm52n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests AttlistDecl with a required field missing. The Name is missing in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P52-ibm52n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests AttlistDecl with a required field missing. The white space is missing between the beginning sequence and the name in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P52-ibm52n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests AttlistDecl with wrong field ordering. The Name "a" occurs after the first AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P52-ibm52n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests AttlistDecl with wrong key word. The string "Attlist" is used as the key word in the beginning sequence in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P52-ibm52n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests AttlistDecl with a required field missing. The closing bracket "greater than" is missing in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P52-ibm52n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 52

Tests AttlistDecl with wrong beginning sequence. The string "(less than)ATTLIST" is used as the beginning sequence in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with a required field missing. The DefaultDecl is missing in the AttDef for the name "attr1" in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with a required field missing. The white space is missing between (abc|def) and "def" in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with a required field missing. The AttType is missing for "attr1" in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with a required field missing. The white space is missing between "attr1" and (abc|def) in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with a required field missing. The Name is missing in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with a required field missing. The white space before the name "attr2" is missing in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with wrong field ordering. The Name "attr1" occurs after the AttType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3
Test ID:ibm-not-wf-P53-ibm53n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 53

Tests AttDef with wrong field ordering. The Name "attr1" occurs after the AttType and "default" occurs before the AttType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P54-ibm54n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 54

Tests AttType with a wrong option. The string "BOGUSATTR" is used as the AttType in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P54-ibm54n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 54

Tests AttType with a wrong option. The string "PCDATA" is used as the AttType in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P55-ibm55n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 55

Tests StringType with a wrong key word. The lower case string "cdata" is used as the StringType in the AttType in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P55-ibm55n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 55

Tests StringType with a wrong key word. The string "#CDATA" is used as the StringType in the AttType in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P55-ibm55n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 55

Tests StringType with a wrong key word. The string "CData" is used as the StringType in the AttType in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "id" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "Idref" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "Idrefs" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "EntitY" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "nmTOKEN" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "NMtokens" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P56-ibm56n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 56

Tests TokenizedType with wrong key word. The "#ID" is used in the TokenizedType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P57-ibm57n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 57

Tests EnumeratedType with an illegal option. The "NMTOKEN (a|b)" is used in the EnumeratedType in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with wrong key word. The lower case "notation" is used as the key word in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with a required field missing. The beginning bracket "(" is missing in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with a required field missing. The Name is missing in the "()" in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with a required field missing. The closing bracket is missing in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with wrong field ordering. The key word "NOTATION" occurs after "(this)" in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with wrong separator. The "," is used as a separator between "this" and "that" in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with a required field missing. The white space is missing between "NOTATION" and "(this)" in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P58-ibm58n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 58

Tests NotationType with extra wrong characters. The double quote character occurs after "(" and before ")" in the NotationType in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P59-ibm59n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration with required fields missing. The Nmtokens and "|"s are missing in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P59-ibm59n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration with a required field missing. The closing bracket ")" is missing in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P59-ibm59n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration with wrong separator. The "," is used as the separator in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P59-ibm59n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration with illegal presence. The double quotes occur around the Enumeration value in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P59-ibm59n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration with a required field missing. The white space is missing between in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1
Test ID:ibm-not-wf-P59-ibm59n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 59

Tests Enumeration with a required field missing. The beginning bracket "(" is missing in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.1 [54]
Test ID:not-wf-sa-058
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid character , in ATTLIST enumeration

Sections [Rules]:3.3.1 [54]
Test ID:o-p54fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

don't pass unknown attribute types

Sections [Rules]:3.3.1 [55]
Test ID:o-p55fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

must be upper case

Sections [Rules]:3.3.1 [56]
Test ID:not-wf-sa-060
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid type NAME defined in ATTLIST.

Sections [Rules]:3.3.1 [56]
Test ID:attlist01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's NUTOKEN is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's NUTOKENS attribute type is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's NUMBER attribute type is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's NUMBERS attribute type is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's NAME attribute type is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist07
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's NAMES attribute type is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist08
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's #CURRENT is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:attlist09
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML's #CONREF is not allowed.

Sections [Rules]:3.3.1 [56]
Test ID:o-p56fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no IDS type

Sections [Rules]:3.3.1 [56]
Test ID:o-p56fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no NUMBER type

Sections [Rules]:3.3.1 [56]
Test ID:o-p56fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no NAME type

Sections [Rules]:3.3.1 [56]
Test ID:o-p56fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no ENTITYS type - types must be upper case

Sections [Rules]:3.3.1 [56]
Test ID:o-p56fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

types must be upper case

Sections [Rules]:3.3.1 [57]
Test ID:o-p57fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no keyword for NMTOKEN enumeration

Sections [Rules]:3.3.1 [58]
Test ID:not-wf-sa-068
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required between NOTATION keyword and list of enumerated choices in <!ATTLIST...> declarations.

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

at least one value required

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

separator must be '|'

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

notations are NAMEs, not NMTOKENs -- note: Leaving the invalid notation undeclared would cause a validating parser to fail without checking the name syntax, so the notation is declared with an invalid name. A parser that reports error positions should report an error at the AttlistDecl on line 6, before reaching the notation declaration.

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

NOTATION must be upper case

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S after keyword is required

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

parentheses are require

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail7
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

values are unquoted

Sections [Rules]:3.3.1 [58]
Test ID:o-p58fail8
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

values are unquoted

Sections [Rules]:3.3.1 [59]
Test ID:not-wf-sa-059
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

String literal must be in quotes.

Sections [Rules]:3.3.1 [59]
Test ID:attlist03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Comma doesn't separate enumerations, unlike in SGML.

Sections [Rules]:3.3.1 [59]
Test ID:o-p59fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

at least one required

Sections [Rules]:3.3.1 [59]
Test ID:o-p59fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

separator must be ","

Sections [Rules]:3.3.1 [59]
Test ID:o-p59fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

values are unquoted

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with wrong key word. The string "#required" is used as the key word in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with wrong key word. The string "Implied" is used as the key word in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with wrong key word. The string "!IMPLIED" is used as the key word in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with a required field missing. There is no attribute value specified after the key word "#FIXED" in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with a required field missing. The white space is missing between the key word "#FIXED" and the attribute value in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with wrong field ordering. The key word "#FIXED" occurs after the attribute value "introduction" in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl against WFC of P60. The text replacement of the entity "avalue" contains the "less than" character in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2
Test ID:ibm-not-wf-P60-ibm60n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 60

Tests DefaultDecl with more than one key word. The "#REQUIRED" and the "#IMPLIED" are used as the key words in the DefaultDecl in the AttDef in the AttlistDecl in the DTD.

Sections [Rules]:3.3.2 [60]
Test ID:o-p60fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

keywords must be upper case

Sections [Rules]:3.3.2 [60]
Test ID:o-p60fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required after #FIXED

Sections [Rules]:3.3.2 [60]
Test ID:o-p60fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only #FIXED has both keyword and value

Sections [Rules]:3.3.2 [60]
Test ID:o-p60fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

#FIXED required value

Sections [Rules]:3.3.2 [60]
Test ID:o-p60fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only one default type

Sections [Rules]:3.3 [52]
Test ID:not-wf-sa-066
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Required whitespace is missing.

Sections [Rules]:3.3 [52]
Test ID:not-wf-sa-158
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

SGML-ism: "#NOTATION gif" can't have attributes.

Sections [Rules]:3.3 [52]
Test ID:sgml04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

ATTLIST declarations apply to only one element, unlike SGML

Sections [Rules]:3.3 [52]
Test ID:sgml06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

ATTLIST declarations are never global, unlike in SGML

Sections [Rules]:3.3 [52]
Test ID:o-p52fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

A name is required

Sections [Rules]:3.3 [52]
Test ID:o-p52fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

A name is required

Sections [Rules]:3.3 [53]
Test ID:not-wf-sa-064
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required between attribute type and default values in <!ATTLIST...> declarations.

Sections [Rules]:3.3 [53]
Test ID:not-wf-sa-065
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required between attribute name and type in <!ATTLIST...> declarations.

Sections [Rules]:3.3 [53]
Test ID:not-wf-sa-067
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required between attribute type and default values in <!ATTLIST...> declarations.

Sections [Rules]:3.3 [53]
Test ID:o-p53fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required before default

Sections [Rules]:3.3 [53]
Test ID:o-p53fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required before type

Sections [Rules]:3.3 [53]
Test ID:o-p53fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

type is required

Sections [Rules]:3.3 [53]
Test ID:o-p53fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

default is required

Sections [Rules]:3.3 [53]
Test ID:o-p53fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

name is requried

Sections [Rules]:3.4
Test ID:ibm-not-wf-P61-ibm61n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 61

Tests conditionalSect with a wrong option. The word "NOTINCLUDE" is used as part of an option which is wrong in the coditionalSect.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with wrong key word. The string "include" is used as a key word in the beginning sequence in the includeSect in the file ibm62n01.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n02.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with wrong beginning sequence. An extra "[" occurs in the beginning sequence in the includeSect in the file ibm62n02.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n03.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with wrong beginning sequence. A wrong character "?" occurs in the beginning sequence in the includeSect in the file ibm62n03.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n04.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with a required field missing. The key word "INCLUDE" is missing in the includeSect in the file ibm62n04.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n05.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with a required field missing. The "]" is missing after the key word "INCLUDE" in the includeSect in the file ibm62n05.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n06.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with wrong field ordering. The two external subset declarations occur before the key word "INCLUDE" in the includeSect in the file ibm62n06.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n07.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with a required field missing. The closing sequence "]](greater than)" is missing in the includeSect in the file ibm62n07.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P62-ibm62n08.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 62

Tests includeSect with a required field missing. One "]" is missing in the closing sequence in the includeSect in the file ibm62n08.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect with wrong key word. The string "ignore" is used as a key word in the beginning sequence in the ignoreSect in the file ibm63n01.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n02.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect with wrong beginning sequence. An extra "[" occurs in the beginning sequence in the ignoreSect in the file ibm63n02.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n03.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect with wrong beginning sequence. A wrong character "?" occurs in the beginning sequence in the ignoreSect in the file ibm63n03.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n04.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect with a required field missing. The key word "IGNORE" is missing in the ignoreSect in the file ibm63n04.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n05.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect with a required field missing. The "]" is missing after the key word "IGNORE" in the ignoreSect in the file ibm63n05.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n06.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests includeSect with wrong field ordering. The two external subset declarations occur before the key word "IGNORE" in the ignoreSect in the file ibm63n06.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P63-ibm63n07.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 63

Tests ignoreSect with a required field missing. The closing sequence "]](greater than)" is missing in the ignoreSect in the file ibm63n07.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P64-ibm64n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 64

Tests ignoreSectContents with wrong beginning sequence. The "?" occurs in beginning sequence the ignoreSectContents in the file ibm64n01.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P64-ibm64n02.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 64

Tests ignoreSectContents with a required field missing.The closing sequence is missing in the ignoreSectContents in the file ibm64n02.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P64-ibm64n03.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 64

Tests ignoreSectContents with a required field missing.The beginning sequence is missing in the ignoreSectContents in the file ibm64n03.dtd.

Sections [Rules]:3.4
Test ID:ibm-not-wf-P65-ibm65n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 65

Tests Ignore with illegal string included. The string "]](greater than)" is contained before "this" in the Ignore in the ignoreSectContents in the file ibm65n01.dtd

Sections [Rules]:3.4
Test ID:ibm-not-wf-P65-ibm65n02.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 65

Tests Ignore with illegal string included. The string "(less than)![" is contained before "this" in the Ignore in the ignoreSectContents in the file ibm65n02.dtd

Sections [Rules]:3.4 [61]
Test ID:cond01
RECOMMENDATION:XML1.0
Entities:parameter
Collection:Sun Microsystems XML Tests

Only INCLUDE and IGNORE are conditional section keywords

Sections [Rules]:3.4 [61]
Test ID:cond02
RECOMMENDATION:XML1.0
Entities:parameter
Collection:Sun Microsystems XML Tests

Must have keyword in conditional sections

Sections [Rules]:3.4 [61]
Test ID:o-p61fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

no other types, including TEMP, which is valid in SGML

Sections [Rules]:3.4 [62]
Test ID:not-wf-not-sa-001
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Conditional sections must be properly terminated ("]>" used instead of "]]>").

Sections [Rules]:3.4 [62]
Test ID:not-wf-not-sa-003
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Conditional sections must be properly terminated ("]]>" omitted).

Sections [Rules]:3.4 [62]
Test ID:not-wf-not-sa-004
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Conditional sections must be properly terminated ("]]>" omitted).

Sections [Rules]:3.4 [62]
Test ID:not-wf-not-sa-006
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Conditional sections need a '[' after the INCLUDE or IGNORE.

Sections [Rules]:3.4 [62]
Test ID:o-p62fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

INCLUDE must be upper case

Sections [Rules]:3.4 [62]
Test ID:o-p62fail2
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

no spaces in terminating delimiter

Sections [Rules]:3.4 [63]
Test ID:o-p63fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

IGNORE must be upper case

Sections [Rules]:3.4 [63]
Test ID:o-p63fail2
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

delimiters must be balanced

Sections [Rules]:3.4 [64]
Test ID:o-p64fail1
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

section delimiters must balance

Sections [Rules]:3.4 [64]
Test ID:o-p64fail2
RECOMMENDATION:XML1.0
Entities:parameter
Collection:OASIS/NIST TESTS, 1-Nov-1998

section delimiters must balance

Sections [Rules]:3 [39]
Test ID:not-wf-sa-176
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Start tags must have matching end tags.

Sections [Rules]:3 [39]
Test ID:sgml01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SGML-ism: omitted end tag for EMPTY content

Sections [Rules]:3 [39]
Test ID:o-p39fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

start-tag requires end-tag

Sections [Rules]:3 [39]
Test ID:o-p39fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

end-tag requires start-tag

Sections [Rules]:3 [39]
Test ID:o-p39fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

XML documents contain one or more elements

Sections [Rules]:4
Test ID:rmt-ns10-025
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Unbound element prefix

Sections [Rules]:4
Test ID:rmt-ns10-026
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Unbound attribute prefix

Sections [Rules]:4.1
Test ID:not-wf-sa-084
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the Parsed Entity WFC by referring to an unparsed entity. (This precedes the error of not declaring that entity's notation, which may be detected any time before the DTD parsing is completed.)

Sections [Rules]:4.1
Test ID:not-wf-sa-180
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The Entity Declared WFC requires entities to be declared before they are used in an attribute list declaration.

Sections [Rules]:4.1
Test ID:not-wf-sa-185
RECOMMENDATION:XML1.0
Entities:parameter
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the Entity Declared WFC. Note: a nonvalidating parser is permitted not to report this WFC violation, since it would need to read an external parameter entity to distinguish it from a violation of the Standalone Declaration VC.

Sections [Rules]:4.1
Test ID:not-wf-ext-sa-001
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the No Recursion WFC by having an external general entity be self-recursive.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#002f" is used as the referred character in the CharRef in the EntityDecl in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with the semicolon character missing. The semicolon character is missing at the end of the CharRef in the attribute value in the STag of element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "49" is used as the referred character in the CharRef in the EntityDecl in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#5~0" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#x002g" is used as the referred character in the CharRef in the EntityDecl in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#x006G" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#0=2f" is used as the referred character in the CharRef in the EntityDecl in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#56.0" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#x00/2f" is used as the referred character in the CharRef in the EntityDecl in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#51)" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#00 2f" is used as the referred character in the CharRef in the EntityDecl in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#x0000" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#x001f" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#xfffe" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P66-ibm66n15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 66

Tests CharRef with an illegal character referred to. The "#xffff" is used as the referred character in the attribute value in the EmptyElemTag of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef with a required field missing. The Name is missing in the EntityRef in the content of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef with a required field missing. The semicolon is missing in the EntityRef in the attribute value in the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef with an extra white space. A white space occurs after the ampersand in the EntityRef in the content of the element "root".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: Entity Declared. The name "aAa" in the EntityRef in the AttValue in the STage of the element "root" does not match the Name of any declared entity in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: Entity Declared. The entity with the name "aaa" in the EntityRef in the AttValue in the STag of the element "root" is not declared.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n06.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: Entity Declared. The entity with the name "aaa" in the EntityRef in the AttValue in the STag of the element "root" is externally declared, but standalone is "yes".

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: Entity Declared. The entity with the name "aaa" in the EntityRef in the AttValue in the STag of the element "root" is referred before declared.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: Parsed Entity. The EntityRef in the AttValue in the STag of the element "root" contains the name "aImage" of an unparsed entity.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: No Recursion. The recursive entity reference occurs with the entity declarations for "aaa" and "bbb" in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P68-ibm68n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests EntityRef which is against P68 WFC: No Recursion. The indirect recursive entity reference occurs with the entity declarations for "aaa", "bbb", "ccc", "ddd", and "eee" in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests PEReference with a required field missing. The Name "paaa" is missing in the PEReference in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests PEReference with a required field missing. The semicolon is missing in the PEReference "%paaa" in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests PEReference with an extra white space. There is an extra white space occurs before ";" in the PEReference in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests PEReference with an extra white space. There is an extra white space occurs after "%" in the PEReference in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests PEReference which is against P69 WFC: No Recursion. The recursive PE reference occurs with the entity declarations for "paaa" and "bbb" in the DTD.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests PEReference which is against P69 WFC: No Recursion. The indirect recursive PE reference occurs with the entity declarations for "paaa", "bbb", "ccc", "ddd", and "eee" in the DTD.

Sections [Rules]:4.1
Test ID:rmt-042
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Contains a character reference to a C0 control character (form-feed), legal in XML 1.1 but not 1.0

Sections [Rules]:4.1 [66]
Test ID:not-wf-sa-009
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character references may have only decimal or numeric strings.

Sections [Rules]:4.1 [66]
Test ID:not-wf-sa-022
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character references end with semicolons, always!

Sections [Rules]:4.1 [66]
Test ID:not-wf-sa-052
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid character reference.

Sections [Rules]:4.1 [66]
Test ID:not-wf-sa-093
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Hexadecimal character references may not use the uppercase 'X'.

Sections [Rules]:4.1 [66]
Test ID:not-wf-sa-179
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid syntax matching double quote is missing.

Sections [Rules]:4.1 [66]
Test ID:o-p66fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

terminating ';' is required

Sections [Rules]:4.1 [66]
Test ID:o-p66fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no S after '&#'

Sections [Rules]:4.1 [66]
Test ID:o-p66fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no hex digits in numeric reference

Sections [Rules]:4.1 [66]
Test ID:o-p66fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only hex digits in hex references

Sections [Rules]:4.1 [66]
Test ID:o-p66fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no references to non-characters

Sections [Rules]:4.1 [66]
Test ID:o-p66fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no references to non-characters

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-007
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

General entity references have no whitespace after the entity name and before the semicolon.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-010
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Ampersand may only appear as part of a general entity reference.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-071
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

ENTITY can't reference itself directly or indirectly.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-072
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Undefined ENTITY foo.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-073
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Undefined ENTITY f.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-075
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

ENTITY can't reference itself directly or indirectly.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-076
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Undefined ENTITY foo.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-078
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Undefined ENTITY foo.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-079
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

ENTITY can't reference itself directly or indirectly.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-080
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

ENTITY can't reference itself directly or indirectly.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-110
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Entity reference must be in content of element.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-118
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Entity reference expansion is not recursive.

Sections [Rules]:4.1 [68]
Test ID:not-wf-sa-121
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

A name of an ENTITY was started with an invalid character.

Sections [Rules]:4.1 [68]
Test ID:o-p68fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

terminating ';' is required

Sections [Rules]:4.1 [68]
Test ID:o-p68fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no S after '&'

Sections [Rules]:4.1 [68]
Test ID:o-p68fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no S before ';'

Sections [Rules]:4.1 [69]
Test ID:not-wf-sa-163
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid placement of Parameter entity reference.

Sections [Rules]:4.1 [69]
Test ID:not-wf-sa-164
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid placement of Parameter entity reference.

Sections [Rules]:4.1 [69]
Test ID:not-wf-not-sa-008
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

In DTDs, the '%' character must be part of a parameter entity reference.

Sections [Rules]:4.1 [69]
Test ID:dtd02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

PE name immediately after "%"

Sections [Rules]:4.1 [69]
Test ID:dtd03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

PE name immediately followed by ";"

Sections [Rules]:4.1 [69]
Test ID:o-p69fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

terminating ';' is required

Sections [Rules]:4.1 [69]
Test ID:o-p69fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no S after '%'

Sections [Rules]:4.1 [69]
Test ID:o-p69fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no S before ';'

Sections [Rules]:4.2
Test ID:not-wf-sa-106
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Invalid placement of entity declaration.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm70n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with a required field missing. The white space is missing between the beginning sequence and the Name "aaa" in the EntityDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with a required field missing. The white space is missing between the Name "aaa" and the EntityDef "aString" in the EntityDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with a required field missing. The EntityDef is missing in the EntityDecl with the Name "aaa" in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with a required field missing. The Name is missing in the EntityDecl with the EntityDef "aString" in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with wrong ordering. The Name "aaa" occurs after the EntityDef in the EntityDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with wrong key word. The string "entity" is used as the key word in the beginning sequence in the EntityDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with a required field missing. The closing bracket (greater than) is missing in the EntityDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P71-ibm71n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 71

Tests EntityDecl with a required field missing. The exclamation mark is missing in the beginning sequence in the EntityDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with a required field missing. The white space is missing between the beginning sequence and the "%" in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with a required field missing. The Name is missing in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with a required field missing. The white space is missing between the Name and the PEDef in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with a required field missing. The PEDef is missing after the Name "paaa" in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with wrong field ordering. The Name "paaa" occurs after the PEDef in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with wrong field ordering. The "%" and the Name "paaa" occurs after the PEDef in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with wrong key word. The string "entity" is used as the key word in the beginning sequence in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with a required field missing. The closing bracket (greater than) is missing in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P72-ibm72n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 72

Tests PEdecl with wrong closing sequence. The string "!(greater than)" is used as the closing sequence in the PEDecl in the DTD.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P73-ibm73n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 73

Tests EntityDef with wrong field ordering. The NDataDecl "NDATA JPGformat" occurs before the ExternalID in the EntityDef in the EntityDecl.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P73-ibm73n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 73

Tests EntityDef with a required field missing. The ExternalID is missing before the NDataDecl in the EntityDef in the EntityDecl.

Sections [Rules]:4.2
Test ID:ibm-not-wf-P74-ibm74n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 74

Tests PEDef with extra fields. The NDataDecl occurs after the ExternalID in the PEDef in the PEDecl in the DTD.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with wrong key word. The string "system" is used as the key word in the ExternalID in the EntityDef in the EntityDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with wrong key word. The string "public" is used as the key word in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with wrong key word. The string "Public" is used as the key word in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with wrong field ordering. The key word "PUBLIC" occurs after the PublicLiteral and the SystemLiteral in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The white space between "SYSTEM" and the Systemliteral is missing in the ExternalID in the EntityDef in the EntityDecl in the DTD.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The Systemliteral is missing after "SYSTEM" in the ExternalID in the EntityDef in the EntityDecl in the DTD.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The white space between the PublicLiteral and the Systemliteral is missing in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The key word "PUBLIC" is missing in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The white space between "PUBLIC" and the PublicLiteral is missing in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The PublicLiteral is missing in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The PublicLiteral is missing in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with a required field missing. The SystemLiteral is missing in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P75-ibm75n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 75

Tests ExternalID with wrong field ordering. The key word "PUBLIC" occurs after the PublicLiteral in the ExternalID in the doctypedecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with wrong key word. The string "ndata" is used as the key word in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with wrong key word. The string "NData" is used as the key word in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with a required field missing. The leading white space is missing in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with a required field missing. The key word "NDATA" is missing in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with a required field missing. The Name after the key word "NDATA" is missing in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with a required field missing. The white space between "NDATA" and the Name is missing in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2
Test ID:ibm-not-wf-P76-ibm76n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 76

Tests NDataDecl with wrong field ordering. The key word "NDATA" occurs after the Name in the NDataDecl in the EntityDef in the GEDecl.

Sections [Rules]:4.2.2 [75]
Test ID:not-wf-sa-054
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

PUBLIC requires two literals.

Sections [Rules]:4.2.2 [75]
Test ID:not-wf-sa-061
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

External entity declarations require whitespace between public and system IDs.

Sections [Rules]:4.2.2 [75]
Test ID:dtd04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

PUBLIC literal must be quoted

Sections [Rules]:4.2.2 [75]
Test ID:dtd05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SYSTEM identifier must be quoted

Sections [Rules]:4.2.2 [75]
Test ID:o-p75fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S required after "PUBLIC"

Sections [Rules]:4.2.2 [75]
Test ID:o-p75fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S required after "SYSTEM"

Sections [Rules]:4.2.2 [75]
Test ID:o-p75fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S required between literals

Sections [Rules]:4.2.2 [75]
Test ID:o-p75fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

"SYSTEM" implies only one literal

Sections [Rules]:4.2.2 [75]
Test ID:o-p75fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only one keyword

Sections [Rules]:4.2.2 [75]
Test ID:o-p75fail6
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

"PUBLIC" requires two literals (contrast with SGML)

Sections [Rules]:4.2.2 [76]
Test ID:not-wf-sa-069
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is required before an NDATA entity annotation.

Sections [Rules]:4.2.2 [76]
Test ID:not-wf-sa-083
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Undefined NOTATION n.

Sections [Rules]:4.2.2 [76]
Test ID:o-p76fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required before "NDATA"

Sections [Rules]:4.2.2 [76]
Test ID:o-p76fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

"NDATA" is upper-case

Sections [Rules]:4.2.2 [76]
Test ID:o-p76fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

notation name is required

Sections [Rules]:4.2.2 [76]
Test ID:o-p76fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

notation names are Names

Sections [Rules]:4.2 [70]
Test ID:not-wf-sa-109
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tags invalid within EntityDecl.

Sections [Rules]:4.2 [70]
Test ID:o-p70fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

This is neither

Sections [Rules]:4.2 [71]
Test ID:not-wf-sa-062
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Entity declarations need space after the entity name.

Sections [Rules]:4.2 [71]
Test ID:o-p71fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required before EntityDef

Sections [Rules]:4.2 [71]
Test ID:o-p71fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Entity name is a Name, not an NMToken

Sections [Rules]:4.2 [71]
Test ID:o-p71fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no S after "<!"

Sections [Rules]:4.2 [71]
Test ID:o-p71fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required after "<!ENTITY"

Sections [Rules]:4.2 [72]
Test ID:not-wf-sa-165
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Parameter entity declarations must have a space before the '%'.

Sections [Rules]:4.2 [72]
Test ID:o-p72fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required after "<!ENTITY"

Sections [Rules]:4.2 [72]
Test ID:o-p72fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required after '%'

Sections [Rules]:4.2 [72]
Test ID:o-p72fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

S is required after name

Sections [Rules]:4.2 [72]
Test ID:o-p72fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Entity name is a name, not an NMToken

Sections [Rules]:4.2 [73]
Test ID:o-p73fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

No typed replacement text

Sections [Rules]:4.2 [73]
Test ID:o-p73fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Only one replacement value

Sections [Rules]:4.2 [73]
Test ID:o-p73fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

No NDataDecl on replacement text

Sections [Rules]:4.2 [73]
Test ID:o-p73fail4
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

Value is required

Sections [Rules]:4.2 [73]
Test ID:o-p73fail5
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

No NDataDecl without value

Sections [Rules]:4.2 [74]
Test ID:not-wf-sa-089
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Parameter entities "are" always parsed; NDATA annotations are not permitted.

Sections [Rules]:4.2 [74]
Test ID:not-wf-sa-091
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Parameter entities "are" always parsed; NDATA annotations are not permitted.

Sections [Rules]:4.2 [74]
Test ID:o-p74fail1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

no NDataDecls on parameter entities

Sections [Rules]:4.2 [74]
Test ID:o-p74fail2
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

value is required

Sections [Rules]:4.2 [74]
Test ID:o-p74fail3
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

only one value

Sections [Rules]:4.3.1
Test ID:ibm-not-wf-P77-ibm77n01.xml
RECOMMENDATION:XML1.0
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

Tests TextDecl with wrong field ordering. The VersionInfo occurs after the EncodingDecl in the TextDecl in the file "ibm77n01.ent".

Sections [Rules]:4.3.1
Test ID:ibm-not-wf-P77-ibm77n02.xml
RECOMMENDATION:XML1.0
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

Tests TextDecl with wrong key word. The string "XML" is used in the beginning sequence in the TextDecl in the file "ibm77n02.ent".

Sections [Rules]:4.3.1
Test ID:ibm-not-wf-P77-ibm77n03.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 77

Tests TextDecl with wrong closing sequence. The character "greater than" is used as the closing sequence in the TextDecl in the file "ibm77n03.ent".

Sections [Rules]:4.3.1
Test ID:ibm-not-wf-P77-ibm77n04.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 77

Tests TextDecl with a required field missing. The closing sequence is missing in the TextDecl in the file "ibm77n04.ent".

Sections [Rules]:4.3.1 [77]
Test ID:decl01
RECOMMENDATION:XML1.0
Entities:parameter
Collection:Sun Microsystems XML Tests

External entities may not have standalone decls.

Sections [Rules]:4.3.1 [77]
Test ID:dtd07
RECOMMENDATION:XML1.0
Entities:parameter
Collection:Sun Microsystems XML Tests

Text declarations (which optionally begin any external entity) are required to have "encoding=...".

Sections [Rules]:4.3.1 [77]
Test ID:encoding07
RECOMMENDATION:XML1.0
Entities:parameter
Collection:Sun Microsystems XML Tests

Text declarations (which optionally begin any external entity) are required to have "encoding=...".

Sections [Rules]:4.3.1 4.3.2 [77, 78]
Test ID:not-wf-ext-sa-002
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

External entities have "text declarations", which do not permit the "standalone=..." attribute that's allowed in XML declarations.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-074
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal general parsed entities are only well formed if they match the "content" production.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-103
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

End-tag required for element foo.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-104
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal general parsed entities are only well formed if they match the "content" production.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-116
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal general parsed entities are only well formed if they match the "content" production. This is a partial character reference, not a full one.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-117
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal general parsed entities are only well formed if they match the "content" production. This is a partial character reference, not a full one.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-119
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal general parsed entities are only well formed if they match the "content" production. This is a partial character reference, not a full one.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-153
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Text declarations may not begin internal parsed entities; they may only appear at the beginning of external parsed (parameter or general) entities.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-181
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal parsed entities must match the content production to be well formed.

Sections [Rules]:4.3.2
Test ID:not-wf-sa-182
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Internal parsed entities must match the content production to be well formed.

Sections [Rules]:4.3.2
Test ID:ibm-not-wf-P78-ibm78n01.xml
RECOMMENDATION:XML1.0
Entities:general
Collection:IBM XML Conformance Test Suite - Production 78

Tests extParsedEnt with wrong field ordering. The TextDecl occurs after the content in the file ibm78n01.ent.

Sections [Rules]:4.3.2
Test ID:ibm-not-wf-P78-ibm78n02.xml
RECOMMENDATION:XML1.0
Entities:general
Collection:IBM XML Conformance Test Suite - Production 78

Tests extParsedEnt with extra field. A blank line occurs before the TextDecl in the file ibm78n02.ent.

Sections [Rules]:4.3.2
Test ID:ibm-not-wf-P79-ibm79n01.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 79

Tests extPE with wrong field ordering. The TextDecl occurs after the extSubsetDecl (the white space and the comment) in the file ibm79n01.ent.

Sections [Rules]:4.3.2
Test ID:ibm-not-wf-P79-ibm79n02.xml
RECOMMENDATION:XML1.0
Entities:parameter
Collection:IBM XML Conformance Test Suite - Production 79

Tests extPE with extra field. A blank line occurs before the TextDecl in the file ibm78n02.ent.

Sections [Rules]:4.3.2 [79]
Test ID:not-wf-not-sa-007
RECOMMENDATION:XML1.0
Entities:both
Collection:James Clark XMLTEST cases, 18-Nov-1998

A <!DOCTYPE ...> declaration may not begin any external entity; it's only found once, in the document entity.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P80-ibm80n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 80

Tests EncodingDecl with a required field missing. The leading white space is missing in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P80-ibm80n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 80

Tests EncodingDecl with a required field missing. The "=" sign is missing in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P80-ibm80n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 80

Tests EncodingDecl with a required field missing. The double quoted EncName are missing in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P80-ibm80n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 80

Tests EncodingDecl with wrong field ordering. The string "encoding=" occurs after the double quoted EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P80-ibm80n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 80

Tests EncodingDecl with wrong field ordering. The "encoding" occurs after the double quoted EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P80-ibm80n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 80

Tests EncodingDecl with wrong key word. The string "Encoding" is used as the key word in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The "_" is used as the first character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The "-" is used as the first character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The "." is used as the first character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with illegal characters. The "8-" is used as the initial characters in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The "~" is used as one character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The "#" is used as one character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The ":" is used as one character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The "/" is used as one character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3
Test ID:ibm-not-wf-P81-ibm81n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 81

Tests EncName with an illegal character. The ";" is used as one character in the EncName in the EncodingDecl in the XMLDecl.

Sections [Rules]:4.3.3 [81]
Test ID:not-wf-sa-101
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Space is not permitted in an encoding name.

Sections [Rules]:4.3.3 [81]
Test ID:encoding01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal character " " in encoding name

Sections [Rules]:4.3.3 [81]
Test ID:encoding02
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal character "/" in encoding name

Sections [Rules]:4.3.3 [81]
Test ID:encoding03
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal character reference in encoding name

Sections [Rules]:4.3.3 [81]
Test ID:encoding04
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal character ":" in encoding name

Sections [Rules]:4.3.3 [81]
Test ID:encoding05
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal character "@" in encoding name

Sections [Rules]:4.3.3 [81]
Test ID:encoding06
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

Illegal character "+" in encoding name

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n01.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and that of the external dtd 1.0. The external dtd contains the invalid XML1.1 but valid XML 1.0 character #x7F.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n02.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and that of the external dtd 1.0. The external dtd contains a comment with the invalid XML1.1 but valid XML 1.0 character #x80.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n03.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and that of the external dtd 1.0. The external dtd contains a PI with the invalid XML1.1 but valid XML 1.0 character #x9F.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n04.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and that of the external entity 1.0. The external entity the contains invalid XML1.1 but valid XML 1.0 character #x89.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n05.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and that of the external entity 1.0. The external entity contains the invalid XML1.1 but valid XML 1.0 character #x94.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n06.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and that of the external entity 1.0. The external entity contains the invalid XML1.1 but valid XML 1.0 character #x9F.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n07.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and the external dtd does not contain a textDecl. The external entity contains the invalid XML1.1 but valid XML 1.0 character #x7F.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n08.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and the external dtd does not contain a VersionNum in the textDecl. The external entity contains the invalid XML1.1 but valid XML 1.0 character #x9B.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n09.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and the external dtd does not contain a textDecl. The external entity contains the invalid XML1.1 but valid XML 1.0 character #x8D.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n10.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and the external dtd does not contain a VersionNum in the textDecl. The external entity contains the invalid XML 1.1 but valid XML 1.0 character #x84.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n11.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and the external dtd does not contain a textDecl. The external entity contains the invalid XML 1.1 but valid XML 1.0 character #x88.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n12.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the document entity is 1.1 and the external dtd does not contain a textDecl. The external entity contains the invalid XML 1.1 but valid XML 1.0 character #x8E.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n13.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.1 and that of the external dtd is 1.0. The external dtd contains an external entity whose VersionNum is 1.1 containing a valid XML1.0 but an invalid XML 1.1 character.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n14.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.1 and that of the external dtd is 1.0. The external dtd contains an element declaration with an invalid XML 1.1 and 1.0 name.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n15.xml
RECOMMENDATION:XML1.1
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.1 and testDecl of the external dtd is absent. The external dtd contains an external entity whose VersionNum is 1.1 containing a valid XML1.0 but an invalid XML 1.1 character #x7F.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n16.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.0 and VersioNum of the external entity is absent. The replacement text of the entity contains an element followed by the valid XML 1.1 of line character NEL #x85 in its empty elem tag.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n17.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is absent and that of the external entity is 1.0. The textDecl in the external entity contains an invalid XML1.0 but valid XML 1.1 enf of line character NEL #x85.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n18.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is absent and that of the external entity is 1.0. The textDecl in the external entity contains an invalid XML1.0 but valid XML 1.1 of line character Unicode line separator #x2028.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n19.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.1 and that of the external dtd is absent. The external dtd contains an external entity whose VersionNum is absent and it contains a valid XML 1.0 but an invalid XML 1.1 character #x94.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n20.xml
RECOMMENDATION:XML1.1
Entities:general
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.1 and that of the external dtd is 1.1. The external dtd contains an external entity whose VersionNum is absent and it contains a valid XML 1.0 but an invalid XML 1.1 character #x8F.

Sections [Rules]:4.3.4
Test ID:ibm-not-wf-P77-ibm77n21.xml
RECOMMENDATION:XML1.1
Entities:both
Collection:IBM XML Conformance Test Suite - Production 77

The VersionNum of the primary document entity is 1.1 and the texlDecl of the external dtd is absent. The external dtd contains a reference to an external parameter entity whose VersionNum is absent from the textDecl and it contains an invalid XML 1.1 character #x8F.

Sections [Rules]:4.5
Test ID:not-wf-sa-092
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The replacement text of this entity has an illegal reference, because the character reference is expanded immediately.

Sections [Rules]:4.5
Test ID:not-wf-sa-115
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

The replacement text of this entity is an illegal character reference, which must be rejected when it is parsed in the context of an attribute value.

Sections [Rules]:4.5
Test ID:not-wf-sa-120
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Character references are expanded in the replacement text of an internal entity, which is then parsed as usual. Accordingly, & must be doubly quoted - encoded either as &amp; or as &#38;#38;.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with a required field missing. The white space after the beginning sequence of the NotationDecl is missing in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with a required field missing. The Name in the NotationDecl is missing in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with a required field missing. The externalID or the PublicID is missing in the NotationDecl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with wrong field ordering. The Name occurs after the "SYSTEM" and the externalID in the NotationDecl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with wrong key word. The string "notation" is used as a key word in the NotationDecl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with a required field missing. The closing bracket (the greater than character) is missing in the NotationDecl.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with wrong beginning sequence. The "!" is missing in the beginning sequence in the NotationDecl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P82-ibm82n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 82

Tests NotationDecl with wrong closing sequence. The extra "!" occurs in the closing sequence in the NotationDecl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P83-ibm83n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 83

Tests PublicID with wrong key word. The string "public" is used as the key word in the PublicID in the NotationDcl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P83-ibm83n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 83

Tests PublicID with wrong key word. The string "Public" is used as the key word in the PublicID in the NotationDcl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P83-ibm83n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 83

Tests PublicID with a required field missing. The key word "PUBLIC" is missing in the PublicID in the NotationDcl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P83-ibm83n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 83

Tests PublicID with a required field missing. The white space between the "PUBLIC" and the PubidLiteral is missing in the PublicID in the NotationDcl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P83-ibm83n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 83

Tests PublicID with a required field missing. The PubidLiteral is missing in the PublicID in the NotationDcl in the DTD.

Sections [Rules]:4.7
Test ID:ibm-not-wf-P83-ibm83n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 83

Tests PublicID with wrong field ordering. The key word "PUBLIC" occurs after the PubidLiteral in the PublicID in the NotationDcl.

Sections [Rules]:41. [68]
Test ID:not-wf-sa-077
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Undefined ENTITY bar.

Sections [Rules]:5
Test ID:rmt-ns11-005
RECOMMENDATION:NS1.1
Collection:Richard Tobin's XML Namespaces 1.1 test suite 14 Feb 2003

Illegal use of prefix that has been unbound

Sections [Rules]:5.3
Test ID:rmt-ns10-035
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: repeated identical attribute

Sections [Rules]:5.3
Test ID:rmt-ns10-036
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Attribute uniqueness: repeated attribute with different prefixes

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x00D7 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x00F7 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0132 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0133 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x013F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0140 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0149 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x017F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01c4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01CC occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n100.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0BB6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n101.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0BBA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n102.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C0D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n103.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C11 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n104.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C29 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n105.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C34 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n106.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C5F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n107.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C62 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n108.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C8D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n109.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0C91 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01F1 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n110.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0CA9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n111.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0CB4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n112.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0CBA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n113.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0CDF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n114.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0CE2 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n115.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0D0D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n116.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0D11 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n117.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0D29 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n118.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0D3A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n119.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0D62 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01F3 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n120.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E2F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n121.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E31 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n122.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E34 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n123.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E46 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n124.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E83 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n125.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E85 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n126.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E89 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n127.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E8B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n128.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E8E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n129.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0E98 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01F6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n130.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EA0 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n131.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EA4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n132.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EA6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n133.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EA8 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n134.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EAC occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n135.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EAF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n136.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EB1 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n137.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EB4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n138.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EBE occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n139.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0EC5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01F9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n140.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0F48 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n141.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0F6A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n142.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x10C6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n143.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x10F7 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n144.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1011 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n145.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1104 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n146.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1108 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n147.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x110A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n148.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x110D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n149.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x113B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x01F9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n150.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x113F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n151.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1141 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n152.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x114D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n153.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x114f occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n154.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1151 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n155.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1156 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n156.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x115A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n157.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1162 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n158.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1164 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n159.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1166 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n16.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0230 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n160.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x116B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n161.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x116F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n162.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1174 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n163.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x119F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n164.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11AC occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n165.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11B6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n166.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11B9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n167.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11BB occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n168.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11C3 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n169.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11F1 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n17.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x02AF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n170.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x11FA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n171.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1E9C occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n172.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1EFA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n173.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F16 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n174.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F1E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n175.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F46 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n176.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F4F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n177.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F58 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n178.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F5A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n179.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F5C occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n18.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x02CF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n180.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1F5E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n181.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #xF17E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n182.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FB5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n183.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FBD occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n184.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FBF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n185.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FC5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n186.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FCD occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n187.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FD5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n188.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FDC occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n189.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FED occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n19.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0387 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n190.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FF5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n191.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x1FFD occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n192.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x2127 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n193.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x212F occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n194.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x2183 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n195.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x3095 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n196.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x30FB occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n197.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x312D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n198.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #xD7A4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n20.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x038B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n21.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x03A2 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n22.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x03CF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n23.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x03D7 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n24.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x03DD occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n25.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x03E1 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n26.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x03F4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n27.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x040D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n28.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0450 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n29.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x045D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n30.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0482 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n31.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04C5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n32.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04C6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n33.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04C9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n34.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04EC occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n35.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04ED occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n36.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04F6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n37.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x04FA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n38.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0557 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n39.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0558 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n40.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0587 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n41.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x05EB occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n42.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x05F3 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n43.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0620 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n44.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x063B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n45.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x064B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n46.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x06B8 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n47.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x06BF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n48.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x06CF occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n49.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x06D4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n50.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x06D6 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n51.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x06E7 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n52.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x093A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n53.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x093E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n54.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0962 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n55.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x098D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n56.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0991 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n57.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0992 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n58.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09A9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n59.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09B1 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n60.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09B5 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n61.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09BA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n62.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09DE occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n63.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09E2 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n64.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x09F2 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n65.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A0B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n66.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A11 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n67.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A29 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n68.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A31 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n69.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A34 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n70.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A37 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n71.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A3A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n72.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A5B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n73.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A70 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n74.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A75 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n75.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n76.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0ABC occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n77.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0A92 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n78.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0AA9 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n79.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0AB1 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n80.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0AB4 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n81.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0ABA occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n82.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B04 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n83.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B0D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n84.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B11 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n85.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B29 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n86.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B31 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n87.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B34 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n88.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B3A occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n89.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B3E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n90.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B5E occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n91.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B62 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n92.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B8B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n93.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B91 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n94.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B98 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n95.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B9B occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n96.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0B9D occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n97.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0BA0 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n98.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0BA7 occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P85-ibm85n99.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 85

Tests BaseChar with an illegal character. The character #x0BAB occurs as the first character of the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P86-ibm86n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 86

Tests Ideographic with an illegal character. The character #x4CFF occurs as the first character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P86-ibm86n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 86

Tests Ideographic with an illegal character. The character #x9FA6 occurs as the first character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P86-ibm86n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 86

Tests Ideographic with an illegal character. The character #x3008 occurs as the first character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P86-ibm86n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 86

Tests Ideographic with an illegal character. The character #x302A occurs as the first character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x02FF occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0346 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0362 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0487 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x05A2 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x05BA occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x05BE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x05C0 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x05C3 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0653 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x06B8 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x06B9 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x06E9 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x06EE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0904 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n16.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x093B occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n17.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x094E occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n18.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0955 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n19.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0964 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n20.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0984 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n21.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x09C5 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n22.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x09C9 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n23.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x09CE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n24.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x09D8 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n25.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x09E4 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n26.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A03 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n27.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A3D occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n28.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A46 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n29.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A49 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n30.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A4E occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n31.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A80 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n32.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0A84 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n33.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0ABB occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n34.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0AC6 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n35.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0ACA occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n36.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0ACE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n37.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B04 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n38.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B3B occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n39.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B44 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n40.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B4A occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n41.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B4E occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n42.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B58 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n43.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0B84 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n44.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0BC3 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n45.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0BC9 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n46.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0BD6 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n47.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0C0D occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n48.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0C45 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n49.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0C49 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n50.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0C54 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n51.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0C81 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n52.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0C84 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n53.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0CC5 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n54.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0CC9 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n55.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0CD4 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n56.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0CD7 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n57.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0D04 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n58.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0D45 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n59.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0D49 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n60.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0D4E occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n61.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0D58 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n62.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0E3F occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n63.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0E3B occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n64.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0E4F occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n66.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0EBA occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n67.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0EBE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n68.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0ECE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n69.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F1A occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n70.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F36 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n71.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F38 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n72.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F3B occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n73.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F3A occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n74.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F70 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n75.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F85 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n76.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F8C occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n77.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F96 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n78.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0F98 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n79.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0FB0 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n80.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0FB8 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n81.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x0FBA occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n82.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x20DD occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n83.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x20E2 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n84.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x3030 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P87-ibm87n85.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 87

Tests CombiningChar with an illegal character. The character #x309B occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0029 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x003B occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x066A occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x06FA occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0970 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x09F2 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0AF0 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0B70 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0C65 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0CE5 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0CF0 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n13.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0D70 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n14.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0E5A occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n15.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0EDA occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P88-ibm88n16.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 88

Tests Digit with an illegal character. The character #x0F2A occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x00B6 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x00B8 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x02D2 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x03FE occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x065F occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n06.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x0EC7 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n07.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x3006 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n08.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x3030 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n09.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x3036 occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n10.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x309C occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n11.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x309F occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:B.
Test ID:ibm-not-wf-P89-ibm89n12.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 89

Tests Extender with an illegal character. The character #x30FF occurs as the second character in the PITarget in the PI in the DTD.

Sections [Rules]:E27
Test ID:rmt-e2e-27
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

Contains an irregular UTF-8 sequence (i.e. a surrogate pair)

Sections [Rules]:E38
Test ID:rmt-e2e-38
RECOMMENDATION:XML1.0-errata2e
Entities:general
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

XML 1.0 document refers to 1.1 entity

Sections [Rules]:E61
Test ID:rmt-e2e-61
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

An encoding declaration using an encoding other than UTF-8. It should generate a fatal error.

Sections [Rules]:NE05
Test ID:rmt-ns10-029
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: declaring the xml prefix incorrectly

Sections [Rules]:NE05
Test ID:rmt-ns10-030
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: binding another prefix to the xml namespace

Sections [Rules]:NE05
Test ID:rmt-ns10-031
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: declaring the xmlns prefix with its correct URI (illegal)

Sections [Rules]:NE05
Test ID:rmt-ns10-032
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: declaring the xmlns prefix with an incorrect URI

Sections [Rules]:NE05
Test ID:rmt-ns10-033
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Reserved prefixes and namespaces: binding another prefix to the xmlns namespace

Sections [Rules]:NE08
Test ID:rmt-ns10-042
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Colon in PI name

Sections [Rules]:NE08
Test ID:rmt-ns10-043
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Colon in entity name

Sections [Rules]:NE08
Test ID:rmt-ns10-044
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Colon in entity name

3.4 XML Documents with Optional Errors

Conforming XML 1.0 Processors are permitted to ignore certain errors, or to report them at user option. In this section of this test report are found descriptions of test cases which fit into this category.

Processor behavior on such test cases does not affect conformance to the XML 1.0 (Second Edition) Recommendation, except as noted.

Sections [Rules]:2
Test ID:rmt-ns10-004
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace name test: a relative URI (deprecated)

Sections [Rules]:2
Test ID:rmt-ns10-005
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace name test: a same-document relative URI (deprecated)

Sections [Rules]:2
Test ID:rmt-ns10-006
RECOMMENDATION:XML1.0
Collection:Richard Tobin's XML Namespaces 1.0 test suite 14 Feb 2003

Namespace name test: an http IRI that is not a URI

Sections [Rules]:2.11
Test ID:rmt-055
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a Latin-1 NEL in the XML declaration (to be made an error in PR)

Sections [Rules]:2.11
Test ID:rmt-056
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a UTF-8 NEL in the XML declaration (to be made an error in PR)

Sections [Rules]:2.11
Test ID:rmt-057
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

Has a UTF-8 LSEP in the XML declaration (to be made an error in PR)

Sections [Rules]:2.3, 4.2.2 [11]
Test ID:o-p11pass1
RECOMMENDATION:XML1.0
Collection:OASIS/NIST TESTS, 1-Nov-1998

system literals may not contain URI fragments

Sections [Rules]:2.8 4.3.4
Test ID:rmt-008
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

an implausibly-versioned document

Sections [Rules]:2.8 4.3.4
Test ID:rmt-009
RECOMMENDATION:XML1.1
Collection:Richard Tobin's XML 1.1 test suite 13 Feb 2003

External general entity has implausible version number

Sections [Rules]:4.1
Test ID:not-wf-not-sa-005
RECOMMENDATION:XML1.0
Collection:James Clark XMLTEST cases, 18-Nov-1998

Tests the Entity Declared VC by referring to an undefined parameter entity within an external entity.

Sections [Rules]:4.1
Test ID:ibm-invalid-P68-ibm68i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests invalid EntityRef which is against P68 VC: Entity Declared. The GE with the name "ge2" is referred in the file ibm68i01.dtd", but not declared.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P68-ibm68i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests invalid EntityRef which is against P68 VC: Entity Declared. The GE with the name "ge1" is referred before declared in the file ibm68i01.dtd".

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P68-ibm68i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests invalid EntityRef which is against P68 VC: Entity Declared. The GE with the name "ge2" is referred in the file ibm68i03.ent", but not declared.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P68-ibm68i04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 68

Tests invalid EntityRef which is against P68 VC: Entity Declared. The GE with the name "ge1" is referred before declared in the file ibm68i04.ent".

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P69-ibm69i01.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests invalid PEReference which is against P69 VC: Entity Declared. The Name "pe2" in the PEReference in the file ibm69i01.dtd does not match the Name of any declared PE.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P69-ibm69i02.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests invalid PEReference which is against P69 VC: Entity Declared. The PE with the name "pe1" is referred before declared in the file ibm69i02.dtd

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P69-ibm69i03.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests invalid PEReference which is against P69 VC: Entity Declared. The Name "pe3" in the PEReference in the file ibm69i03.ent does not match the Name of any declared PE.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-invalid-P69-ibm69i04.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Tests invalid PEReference which is against P69 VC: Entity Declared. The PE with the name "pe2" is referred before declared in the file ibm69i04.ent.

There is an output test associated with this input file.

Sections [Rules]:4.1
Test ID:ibm-not-wf-P69-ibm69n05.xml
RECOMMENDATION:XML1.0
Collection:IBM XML Conformance Test Suite - Production 69

Based on E29 substantial source: minutes XML-Syntax 1999-02-24 E38 in XML 1.0 Errata, this WFC does not apply to P69, but the VC Entity declared still apply. Tests PEReference which is against P69 WFC: Entity Declared. The PE with the name "paaa" is referred before declared in the DTD.

Sections [Rules]:4.2.2 [75]
Test ID:uri01
RECOMMENDATION:XML1.0
Collection:Sun Microsystems XML Tests

SYSTEM ids may not have URI fragments

Sections [Rules]:4.3.3 [4,84]
Test ID:pr-xml-euc-jp
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for the EUC-JP encoding, and for text which relies on Japanese characters. If a processor does not support this encoding, it must report a fatal error. (Also requires ability to process a moderately complex DTD.)

Sections [Rules]:4.3.3 [4,84]
Test ID:pr-xml-iso-2022-jp
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for the ISO-2022-JP encoding, and for text which relies on Japanese characters. If a processor does not support this encoding, it must report a fatal error. (Also requires ability to process a moderately complex DTD.)

Sections [Rules]:4.3.3 [4,84]
Test ID:pr-xml-shift_jis
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for the Shift_JIS encoding, and for text which relies on Japanese characters. If a processor does not support this encoding, it must report a fatal error. (Also requires ability to process a moderately complex DTD.)

Sections [Rules]:4.3.3 [4,84]
Test ID:weekly-euc-jp
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for EUC-JP encoding, and XML names which contain Japanese characters. If a processor does not support this encoding, it must report a fatal error.

Sections [Rules]:4.3.3 [4,84]
Test ID:weekly-iso-2022-jp
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for ISO-2022-JP encoding, and XML names which contain Japanese characters. If a processor does not support this encoding, it must report a fatal error.

Sections [Rules]:4.3.3 [4,84]
Test ID:weekly-shift_jis
RECOMMENDATION:XML1.0
Collection:Fuji Xerox Japanese Text Tests

Test support for Shift_JIS encoding, and XML names which contain Japanese characters. If a processor does not support this encoding, it must report a fatal error.

Sections [Rules]:E34
Test ID:rmt-e2e-34
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

A non-deterministic content model is an error even if the element type is not used.

Sections [Rules]:E55
Test ID:rmt-e2e-55
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

A reference to an unparsed entity in an entity value is an error rather than forbidden (unless the entity is referenced, of course)

Sections [Rules]:E57
Test ID:rmt-e2e-57
RECOMMENDATION:XML1.0-errata2e
Collection:Richard Tobin's XML 1.0 2nd edition errata test suite 21 Jul 2003

A value other than preserve or default for xml:space is an error

4. Contributors (Non-normative)

A team of volunteer members have participated in the development of this work. Contributions have come from:

End