path: root/src/bluetooth/qbluetoothlocaldevice.cpp

/****************************************************************************
**
** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the QtBluetooth module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia.  For licensing terms and
** conditions see http://qt.digia.com/licensing.  For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights.  These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "qbluetoothlocaldevice.h"
#include "qbluetoothlocaldevice_p.h"
#include "qbluetoothaddress.h"

#include <QtCore/QString>

QT_BEGIN_NAMESPACE

/*!
    \class QBluetoothLocalDevice
    \inmodule QtBluetooth
    \brief The QBluetoothLocalDevice class enables access to the local Bluetooth
    device.

    QBluetoothLocalDevice provides functions for getting and setting the state of local Bluetooth
    devices.
*/

/*!
    \enum QBluetoothLocalDevice::Pairing

    This enum describes the pairing state between the two Bluetooth devices.

    \value Unpaired         The Bluetooth devices are not paired.
    \value Paired           The Bluetooth devices are paired. The system will prompt the user for
                            authorization when the remote device initiates a connection to the
                            local device.
    \value AuthorizedPaired The Bluetooth devices are paired. The system will not prompt the user
                            for authorization when the remote device initiates a connection to the
                            local device.
*/

/*!
  \enum QBluetoothLocalDevice::Error

  This enum describes errors that maybe returned

  \value NoError        No known error
  \value PairingError   Error in pairing
  \value UnknownError   Unknown error

*/

/*!
    \enum QBluetoothLocalDevice::HostMode

    This enum describes the most of the local Bluetooth device.

    \value HostPoweredOff       Power off the device
    \value HostConnectable      Remote Bluetooth devices can connect to the local Bluetooth device
    if they have previously been paired with it or otherwise know its address. This powers up the
    device if it was powered off.
    \value HostDiscoverable     Remote Bluetooth devices can discover the presence of the local
    Bluetooth device. The device will also be connectable, and powered on. On Android, this mode can only be active
    for a maximum of 5 minutes.
    \value HostDiscoverableLimitedInquiry Remote Bluetooth devices can discover the presence of the local
     Bluetooth device when performing a limited inquiry. This should be used for locating services that are
     only made discoverable for a limited period of time. This can speed up discovery between gaming devices,
     as service discovery can be skipped on devices not in LimitedInquiry mode. In this mode, the device will
     be connectable and powered on, if required. This mode is is not supported on Android.

*/

namespace
{
    class LocalDeviceRegisterMetaTypes
    {
    public:
        LocalDeviceRegisterMetaTypes()
        {
            qRegisterMetaType<QBluetoothLocalDevice::HostMode>("QBluetoothLocalDevice::HostMode");
            qRegisterMetaType<QBluetoothLocalDevice::Pairing>("QBluetoothLocalDevice::Pairing");
            qRegisterMetaType<QBluetoothLocalDevice::Error>("QBluetoothLocalDevice::Error");
        }
    } _registerLocalDeviceMetaTypes;
}

/*!
    Destroys the QBluetoothLocalDevice.
*/
QBluetoothLocalDevice::~QBluetoothLocalDevice()
{
    delete d_ptr;
}

/*!
    Returns true if the QBluetoothLocalDevice represents an available local Bluetooth device;
    otherwise return false.
*/
bool QBluetoothLocalDevice::isValid() const
{
    if (d_ptr)
        return d_ptr->isValid();
    return false;
}

/*!
    \fn void QBluetoothLocalDevice::setHostMode(QBluetoothLocalDevice::HostMode mode)

    Sets the host mode of this local Bluetooth device to \a mode.
    NOTE: Due to security policies of platforms, this method may behave different on different platforms. For example
    the system can ask the user for confirmation before turning Bluetooth on or off. Not all host modes may be
    supported on all platforms. Please refer to the platform specific Bluetooth documentation for details.
*/

/*!
    \fn QBluetoothLocalDevice::HostMode QBluetoothLocalDevice::hostMode() const

    Returns the current host mode of this local Bluetooth device.
*/

/*!
    \fn QBluetoothLocalDevice::name() const

    Returns the name assgined by the user to this Bluetooth device.
*/

/*!
    \fn QBluetoothLocalDevice::address() const

    Returns the MAC address of this Bluetooth device.
*/

/*!
    \fn QList<QBluetoothLocalDevice> QBluetoothLocalDevice::allDevices()

    Returns a list of all available local Bluetooth devices.
*/

/*!
  \fn QBluetoothLocalDevice::powerOn()

  Powers on the device after returning it to the hostMode() state, if it was powered off.
  NOTE: Due to security policies of platforms, this method may behave different on different platforms. For example
  the system can ask the user for confirmation before turning Bluetooth on or off.
  Please refer to the platform specific Bluetooth documentation for details.
*/

/*!
  \fn QBluetoothLocalDevice::QBluetoothLocalDevice(QObject *parent)
    Constructs a QBluetoothLocalDevice with \a parent.
*/

/*!
  \fn QBluetoothLocalDevice::hostModeStateChanged(QBluetoothLocalDevice::HostMode state)
  The \a state of the host has transitioned to a different HostMode.
*/

/*!
  \fn QBluetoothLocalDevice::deviceConnected(const QBluetoothAddress &address)
  \since 5.3

  This signal is emitted when the local device establishes a connection to a remote device
  with \a address.

  \sa deviceDisconnected(), connectedDevices()
*/

/*!
  \fn QBluetoothLocalDevice::deviceDisconnected(const QBluetoothAddress &address)
  \since 5.3

  This signal is emitted when the local device disconnects from a remote Bluetooth device
  with \a address.

  \sa deviceConnected(), connectedDevices()
*/

/*!
  \fn QList<QBluetoothAddress> QBluetoothLocalDevice::connectedDevices() const
  \since 5.3

  Returns the list of connected devices. This list is different from the list of currently
  paired devices.

  On Android it is not possible to retrieve a list of connected devices. It is only possible to
  listen to (dis)connect changes. For convenience, this class monitors all connect
  and disconnect events since its instanciation and returns the current list when calling this function.
  Therefore it is possible that this function returns an empty list shortly after creating an
  instance.

  \sa deviceConnected(), deviceDisconnected()
*/

/*!
  \fn QBluetoothLocalDevice::pairingStatus(const QBluetoothAddress &address) const

  Returns the current bluetooth pairing status of \a address, if it's unpaired, paired, or paired and authorized.
*/


/*!
  \fn QBluetoothLocalDevice::pairingDisplayConfirmation(const QBluetoothAddress &address, QString pin)

  Signal by some platforms to display a pairing confirmation dialog for \a address.  The user
  is asked to confirm the \a pin is the same on both devices.  The \l pairingConfirmation() function
  must be called to indicate if the user accepts or rejects the displayed pin.

  This signal is only emitted for pairing requests issues by calling \l requestPairing().

  \sa pairingConfirmation()
*/

/*!
  \fn QBluetoothLocalDevice::pairingConfirmation(bool accept)

  To be called after getting a pairingDisplayConfirmation().  The \a accept parameter either
  accepts the pairing or rejects it.

  Accepting a pairing always refers to the last pairing request issued via \l requestPairing().
*/

/*!
  \fn QBluetoothLocalDevice::pairingDisplayPinCode(const QBluetoothAddress &address, QString pin)

  Signal by some platforms to display the \a pin to the user for \a address.  The pin is automatically
  generated, and does not need to be confirmed.

  This signal is only emitted for pairing requests issues by calling \l requestPairing().
*/

/*!
  \fn QBluetoothLocalDevice::requestPairing(const QBluetoothAddress &address, Pairing pairing)

  Set the \a pairing status with \a address.  The results are returned by the signal, pairingFinished().
  On BlackBerry AuthorizedPaired is not possible and will have the same behavior as Paired.
  Caution: creating a pairing may take minutes, and may require the user to acknowledge.
*/

/*!
  \fn QBluetoothLocalDevice::pairingFinished(const QBluetoothAddress &address, QBluetoothLocalDevice::Pairing pairing)

  Pairing or unpairing has completed with \a address. Current pairing status is in \a pairing.
  If the pairing request was not successful, this signal will not be emitted. The error() signal
  is emitted if the pairing request failed. The signal is only ever emitted for pairing requests
  which have previously requested by calling \l requestPairing() of the current object instance.
*/

/*!
  \fn QBluetoothLocalDevice::error(QBluetoothLocalDevice::Error error)
  Signal emitted if there's an exceptional \a error while pairing.
*/


/*!
  \fn QBluetoothLocalDevice::QBluetoothLocalDevice(const QBluetoothAddress &address, QObject *parent = 0)

  Construct new QBluetoothLocalDevice for \a address. If \a address is default constructed
  the resulting local device selects the local default device.
*/

#include "moc_qbluetoothlocaldevice.cpp"

QT_END_NAMESPACE