diff options
Diffstat (limited to 'tests/manual/kinectsurface/QtKinectWrapper/OpenNI/Include/Win32/usb100.h')
| -rw-r--r-- | tests/manual/kinectsurface/QtKinectWrapper/OpenNI/Include/Win32/usb100.h | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/tests/manual/kinectsurface/QtKinectWrapper/OpenNI/Include/Win32/usb100.h b/tests/manual/kinectsurface/QtKinectWrapper/OpenNI/Include/Win32/usb100.h new file mode 100644 index 00000000..63c87b58 --- /dev/null +++ b/tests/manual/kinectsurface/QtKinectWrapper/OpenNI/Include/Win32/usb100.h @@ -0,0 +1,270 @@ +#ifndef __USB100_H__ +#define __USB100_H__ + + +#include <PSHPACK1.H> + + +//bmRequest.Dir +#define BMREQUEST_HOST_TO_DEVICE 0 +#define BMREQUEST_DEVICE_TO_HOST 1 + +//bmRequest.Type +#define BMREQUEST_STANDARD 0 +#define BMREQUEST_CLASS 1 +#define BMREQUEST_VENDOR 2 + +//bmRequest.Recipient +#define BMREQUEST_TO_DEVICE 0 +#define BMREQUEST_TO_INTERFACE 1 +#define BMREQUEST_TO_ENDPOINT 2 +#define BMREQUEST_TO_OTHER 3 + + +#define MAXIMUM_USB_STRING_LENGTH 255 + +// values for the bits returned by the USB GET_STATUS command +#define USB_GETSTATUS_SELF_POWERED 0x01 +#define USB_GETSTATUS_REMOTE_WAKEUP_ENABLED 0x02 + + +#define USB_DEVICE_DESCRIPTOR_TYPE 0x01 +#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02 +#define USB_STRING_DESCRIPTOR_TYPE 0x03 +#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04 +#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05 + +// descriptor types defined by DWG documents +#define USB_RESERVED_DESCRIPTOR_TYPE 0x06 +#define USB_CONFIG_POWER_DESCRIPTOR_TYPE 0x07 +#define USB_INTERFACE_POWER_DESCRIPTOR_TYPE 0x08 + +#define USB_DESCRIPTOR_MAKE_TYPE_AND_INDEX(d, i) ((USHORT)((USHORT)d<<8 | i)) + +// +// Values for bmAttributes field of an +// endpoint descriptor +// + +#define USB_ENDPOINT_TYPE_MASK 0x03 + +#define USB_ENDPOINT_TYPE_CONTROL 0x00 +#define USB_ENDPOINT_TYPE_ISOCHRONOUS 0x01 +#define USB_ENDPOINT_TYPE_BULK 0x02 +#define USB_ENDPOINT_TYPE_INTERRUPT 0x03 + + +// +// definitions for bits in the bmAttributes field of a +// configuration descriptor. +// +#define USB_CONFIG_POWERED_MASK 0xc0 + +#define USB_CONFIG_BUS_POWERED 0x80 +#define USB_CONFIG_SELF_POWERED 0x40 +#define USB_CONFIG_REMOTE_WAKEUP 0x20 + +// +// Endpoint direction bit, stored in address +// + +#define USB_ENDPOINT_DIRECTION_MASK 0x80 + +// test direction bit in the bEndpointAddress field of +// an endpoint descriptor. +#define USB_ENDPOINT_DIRECTION_OUT(addr) (!((addr) & USB_ENDPOINT_DIRECTION_MASK)) +#define USB_ENDPOINT_DIRECTION_IN(addr) ((addr) & USB_ENDPOINT_DIRECTION_MASK) + +// +// USB defined request codes +// see chapter 9 of the USB 1.0 specifcation for +// more information. +// + +// These are the correct values based on the USB 1.0 +// specification + +#define USB_REQUEST_GET_STATUS 0x00 +#define USB_REQUEST_CLEAR_FEATURE 0x01 + +#define USB_REQUEST_SET_FEATURE 0x03 + +#define USB_REQUEST_SET_ADDRESS 0x05 +#define USB_REQUEST_GET_DESCRIPTOR 0x06 +#define USB_REQUEST_SET_DESCRIPTOR 0x07 +#define USB_REQUEST_GET_CONFIGURATION 0x08 +#define USB_REQUEST_SET_CONFIGURATION 0x09 +#define USB_REQUEST_GET_INTERFACE 0x0A +#define USB_REQUEST_SET_INTERFACE 0x0B +#define USB_REQUEST_SYNC_FRAME 0x0C + + +// +// defined USB device classes +// + + +#define USB_DEVICE_CLASS_RESERVED 0x00 +#define USB_DEVICE_CLASS_AUDIO 0x01 +#define USB_DEVICE_CLASS_COMMUNICATIONS 0x02 +#define USB_DEVICE_CLASS_HUMAN_INTERFACE 0x03 +#define USB_DEVICE_CLASS_MONITOR 0x04 +#define USB_DEVICE_CLASS_PHYSICAL_INTERFACE 0x05 +#define USB_DEVICE_CLASS_POWER 0x06 +#define USB_DEVICE_CLASS_PRINTER 0x07 +#define USB_DEVICE_CLASS_STORAGE 0x08 +#define USB_DEVICE_CLASS_HUB 0x09 +#define USB_DEVICE_CLASS_VENDOR_SPECIFIC 0xFF + +// +// USB Core defined Feature selectors +// + +#define USB_FEATURE_ENDPOINT_STALL 0x0000 +#define USB_FEATURE_REMOTE_WAKEUP 0x0001 + +// +// USB DWG defined Feature selectors +// + +#define USB_FEATURE_INTERFACE_POWER_D0 0x0002 +#define USB_FEATURE_INTERFACE_POWER_D1 0x0003 +#define USB_FEATURE_INTERFACE_POWER_D2 0x0004 +#define USB_FEATURE_INTERFACE_POWER_D3 0x0005 + +typedef struct _USB_DEVICE_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + USHORT bcdUSB; + UCHAR bDeviceClass; + UCHAR bDeviceSubClass; + UCHAR bDeviceProtocol; + UCHAR bMaxPacketSize0; + USHORT idVendor; + USHORT idProduct; + USHORT bcdDevice; + UCHAR iManufacturer; + UCHAR iProduct; + UCHAR iSerialNumber; + UCHAR bNumConfigurations; +} USB_DEVICE_DESCRIPTOR, *PUSB_DEVICE_DESCRIPTOR; + +typedef struct _USB_ENDPOINT_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + UCHAR bEndpointAddress; + UCHAR bmAttributes; + USHORT wMaxPacketSize; + UCHAR bInterval; +} USB_ENDPOINT_DESCRIPTOR, *PUSB_ENDPOINT_DESCRIPTOR; + +typedef struct _USB_CONFIGURATION_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + USHORT wTotalLength; + UCHAR bNumInterfaces; + UCHAR bConfigurationValue; + UCHAR iConfiguration; + UCHAR bmAttributes; + UCHAR MaxPower; +} USB_CONFIGURATION_DESCRIPTOR, *PUSB_CONFIGURATION_DESCRIPTOR; + +typedef struct _USB_INTERFACE_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + UCHAR bInterfaceNumber; + UCHAR bAlternateSetting; + UCHAR bNumEndpoints; + UCHAR bInterfaceClass; + UCHAR bInterfaceSubClass; + UCHAR bInterfaceProtocol; + UCHAR iInterface; +} USB_INTERFACE_DESCRIPTOR, *PUSB_INTERFACE_DESCRIPTOR; + +typedef struct _USB_STRING_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + WCHAR bString[1]; +} USB_STRING_DESCRIPTOR, *PUSB_STRING_DESCRIPTOR; + +typedef struct _USB_COMMON_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; +} USB_COMMON_DESCRIPTOR, *PUSB_COMMON_DESCRIPTOR; + + +// +// Standard USB HUB definitions +// +// See Chapter 11 USB core specification +// + +typedef struct _USB_HUB_DESCRIPTOR { + UCHAR bDescriptorLength; // Length of this descriptor + UCHAR bDescriptorType; // Hub configuration type + UCHAR bNumberOfPorts; // number of ports on this hub + USHORT wHubCharacteristics; // Hub Charateristics + UCHAR bPowerOnToPowerGood; // port power on till power good in 2ms + UCHAR bHubControlCurrent; // max current in mA + // + // room for 255 ports power control and removable bitmask + UCHAR bRemoveAndPowerMask[64]; +} USB_HUB_DESCRIPTOR, *PUSB_HUB_DESCRIPTOR; + + +// +// Structures defined by various DWG feature documents +// + + +// +// See DWG USB Feature Specification: Interface Power Management +// + +#define USB_SUPPORT_D0_COMMAND 0x01 +#define USB_SUPPORT_D1_COMMAND 0x02 +#define USB_SUPPORT_D2_COMMAND 0x04 +#define USB_SUPPORT_D3_COMMAND 0x08 + +#define USB_SUPPORT_D1_WAKEUP 0x10 +#define USB_SUPPORT_D2_WAKEUP 0x20 + + +typedef struct _USB_CONFIGURATION_POWER_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + UCHAR SelfPowerConsumedD0[3]; + UCHAR bPowerSummaryId; + UCHAR bBusPowerSavingD1; + UCHAR bSelfPowerSavingD1; + UCHAR bBusPowerSavingD2; + UCHAR bSelfPowerSavingD2; + UCHAR bBusPowerSavingD3; + UCHAR bSelfPowerSavingD3; + USHORT TransitionTimeFromD1; + USHORT TransitionTimeFromD2; + USHORT TransitionTimeFromD3; +} USB_CONFIGURATION_POWER_DESCRIPTOR, *PUSB_CONFIGURATION_POWER_DESCRIPTOR; + + +typedef struct _USB_INTERFACE_POWER_DESCRIPTOR { + UCHAR bLength; + UCHAR bDescriptorType; + UCHAR bmCapabilitiesFlags; + UCHAR bBusPowerSavingD1; + UCHAR bSelfPowerSavingD1; + UCHAR bBusPowerSavingD2; + UCHAR bSelfPowerSavingD2; + UCHAR bBusPowerSavingD3; + UCHAR bSelfPowerSavingD3; + USHORT TransitionTimeFromD1; + USHORT TransitionTimeFromD2; + USHORT TransitionTimeFromD3; +} USB_INTERFACE_POWER_DESCRIPTOR, *PUSB_INTERFACE_POWER_DESCRIPTOR; + + +#include <POPPACK.H> + + +#endif /* __USB100_H__ */ + |