/**************************************************************************** ** ** Copyright (C) 2014 Digia Plc ** All rights reserved. ** For any questions to Digia, please use contact form at http://qt.io ** ** This file is part of the Qt Data Visualization module. ** ** Licensees holding valid commercial license for Qt may use this file in ** accordance with the Qt License Agreement provided with the Software ** or, alternatively, in accordance with the terms contained in a written ** agreement between you and Digia. ** ** If you have questions regarding the use of this file, please use ** contact form at http://qt.io ** ****************************************************************************/ /*! \namespace QtDataVisualization \inmodule QtDataVisualization QtDataVisualization namespace holds all the classes and enumerations in the QtDataVisualization module. \generatelist{classesbymodule QtDataVisualization} */ /*! \module QtDataVisualization \title Qt Data Visualization C++ Classes \ingroup modules \brief C++ classes for the Qt Data Visualization API. The Qt Data Visualization functionality can be accessed via these C++ classes. */ /*! \qmlmodule QtDataVisualization 1.2 \title Qt Data Visualization QML Types \ingroup qmlmodules \brief QML types for the Qt Data Visualization API. The Qt Data Visualization functionality can be accessed via these QML types. \section1 QML Types */ /*! \group datavisualization_examples \ingroup all-examples \title Qt Data Visualization Examples \brief Examples for the Qt Data Visualization. For some code examples, see one of the Qt Data Visualization examples: \section1 Examples \annotatedlist qtdatavisualization_examples */ /*! \group qtdatavisualization_getting_started \title Qt Data Visualization Getting Started \section1 Installing the Qt Data Visualization module Use the \c {Package Manager} in \c {Maintenance Tool} or the \c {Online installer} to install the Qt Data Visualization module. The module can be found under \c {Qt Enterprise Add-Ons} in the package manager. After installation Qt Data Visualization documentation and examples are available in Qt Creator. Examples can be found on the examples page of Qt Creator by selecting the Qt Data Visualization component from the drop-down menu. The source code is installed into the QtDataVisualization folder under EnterpriseAddOns. \section1 Building Qt Data Visualization To build the Qt Data Visualization module from source code yourself, set up a command prompt with an environment for building Qt applications, navigate to the directory containing \c {qtdatavisualization.pro}, and configure the project with qmake: \code qmake \endcode After running qmake, build the project with make: \table \header \li OS \li Make command \row \li Linux \li make \row \li Windows (MinGw) \li mingw32-make \row \li Windows (MSVC) \li nmake \row \li OS X \li make \endtable The above generates the default makefiles for your configuration, which is typically the release build if you are using precompiled binary Qt distribution. To build both debug and release, or one specifically, use one of the following qmake lines instead. For debug builds: \code qmake CONFIG+=debug make \endcode or \code qmake CONFIG+=debug_and_release make debug \endcode For release builds: \code qmake CONFIG+=release make \endcode or \code qmake CONFIG+=debug_and_release make release \endcode For both builds (Windows/OS X only): \code qmake CONFIG+="debug_and_release build_all" make \endcode After building, install the module to your Qt directory: \code make install \endcode If you want to uninstall the module: \code make uninstall \endcode To build a statically linked version of the Qt Data Visualization module, give the following commands: \snippet doc_src_qtdatavisualization.cpp 7 \section1 Running examples Qt Data Visualization examples are found under the \c examples subdirectory. To build and run a single example, in this case qmlsurface, navigate to the example directory and enter the following commands: \snippet doc_src_qtdatavisualization.cpp 8 \note On some platforms, such as Windows, the executable can be generated under debug or release folders, depending on your build. \section1 Creating a simple application To create a simple application, start by creating a new Qt Gui Application project in Qt Creator and add this line to the \c .pro file of the project: \snippet doc_src_qtdatavisualization.pro 0 In the \c main.cpp file, include the module headers and declare namespace usage: \snippet doc_src_qtdatavisualization.cpp 0 Then, add the sample code found in one of the following pages, depending on what kind of visualization you are interested in: \l{How to construct a minimal Q3DBars graph}, \l{How to construct a minimal Q3DScatter graph}, or \l{How to construct a minimal Q3DSurface graph}. To use Qt Data Visualization graphs in widget based applications, you can use the QWidget::createWindowContainer() function to wrap the graph into a widget: \snippet doc_src_qtdatavisualization.cpp 9 For further code examples, see one of the Qt Data Visualization examples: \annotatedlist qtdatavisualization_examples */ /*! \page qtdatavisualization_data_handling.html \title Qt Data Visualization Data Handling \section1 Series Series is combination of logically connected set of data items (handled by a data proxy) and visual properties that describe how the data items should be rendered, such as item meshes and colors. Each visualization type has its own series type. For example, bar graphs use QBar3DSeries. All graphs can have multiple series added simultaneously. This code snippet shows how to use QBar3DSeries to render bars as cylinders and with a gradient instead of a uniform color: \snippet doc_src_qtdatavisualization.cpp 11 \section1 Data proxies The data that users wish to visualize comes in many formats, all of which cannot obviously be directly supported. Therefore, Qt Data Visualization implements data proxies into which user can feed their data in a known format. Each visualization type has a basic proxy type, which takes data in a format suitable for that visualization. For example, the basic proxy for QBar3DSeries is QBarDataProxy, which stores rows of QBarDataItem objects. Each QBarDataItem stores a single bar value. Additional typedefs are provided for \c QBarDataArray and \c QBarDataRow containers. This code snippet shows how to use basic proxy when your data is stored in some hypothetical \c myData object: \snippet doc_src_qtdatavisualization.cpp 10 \note Series objects can own only a single proxy at a time. The existing proxy is deleted when another is set to the series. Graphs can contain multiple series, though. If you need to switch back and forth between two different sets of data, it is usually more efficient to store each set in a different series and just change the series, rather than reset the data in one proxy every time you need to switch. \section1 Item models and data mapping For common use cases, Qt Data Visualization offers specialized proxies. One such case is having data in an item model (QAbstractItemModel subclass), which is a common way to store data in Qt applications. Each of the visualization types offers a special proxy class for this purpose, for example, QItemModelBarDataProxy for QBar3DSeries. These proxies are simple to use: just give them a pointer to the item model containing the data and the rules how to map the data into format the basic proxy can digest. Mapping works with item model roles. Each data item in the model can have different values for different roles. For example, with QItemModelBarDataProxy you can specify which role is used to determine which row the item belongs to, which role does the same for columns, and which role specifies the value of the item. When the proxy resolves the data from the model, it uses these mappings to generate the rows and columns of the bar graph. Often the item models will have a single role that contains information you want to map to multiple values. A typical example of this is a timestamp field when generating a bar graph with two time related axes, for example years and months. To enable mapping a single item model role to more than one data field, pattern matching and replacing mechanism is provided by item model proxies. You can also use this mechanism to reformat data even in one-to-one mapping cases. Depending on the visualization type, proxies may support other functionalities as well, such as QItemModelBarDataProxy optionally mapping QAbstractItemModel rows and columns directly into bar graph rows and columns. See individual proxy classes for more information and examples about how to use them: QItemModelBarDataProxy, QItemModelScatterDataProxy, and QItemModelSurfaceDataProxy. \section1 Other custom proxies QHeightMapSurfaceDataProxy is a specialized proxy for generating a surface graph from a heightmap image. See the QHeightMapSurfaceDataProxy documentation for more information. The \l{Custom Proxy Example}{Custom Proxy} example shows how a custom proxy can be created. It defines a custom data set based on variant lists and an extension of the basic proxy to resolve that data with an associated mapper. \section1 Dealing with real-time data When you have a data set that updates rapidly, it is important to handle data properly to ensure good performance. Since memory allocation is a costly operation, always use QList::reserve() and QVector::resize() where possible to avoid unnecessary reallocations when constructing the array to give to the proxy. If you need to change the entire data set for each frame, it is in most cases best to reuse the existing array - especially if the array dimensions do not change. If you need to add, insert, remove, or change several rows or items for each frame, it is always more efficient to do it with one method call instead of multiple calls affecting a single row or item each. For example, adding ten rows with a single QBarDataProxy::addRows() call is much more efficient than ten separate QBarDataProxy::addRow() calls. Bars renderer is optimized to access only data that is within the data window and thus should not suffer noticeable slowdown even if more data is continually added to the proxy. Due to the unsorted nature of the scatter data, any change in the data window ranges requires all data points to be checked for visibility, which can cause increasing slowdown if data is continually added to the proxy. For the best performance with the scatter graphs, only keep the data you need in the proxy. Surface data, while on item level similar to scatter data, is already assigned into rows and columns, so the surface renderer can optimize drawing by making the assumption that the data in the rows and columns is sorted along their respective axes. It is not quite as efficient as in the bars case, but nearly so. */ /*! \page qtdatavisualization_interacting_with_data.html \title Qt Data Visualization Interacting with Data \section1 Interacting with data You can interact with the rendered graph with either mouse or touch to rotate, zoom, or select data. For the default mouse controls, see Q3DInputHandler documentation, and for the default touch controls, see QTouch3DInputHandler documentation. \section1 Data selection modes All visualization types support selecting a single data item - a bar, a scatter item, or a surface vertex - using mouse, touch, and programmatically via the series APIs. The selected item is highlighted in the rendered graph, and selecting causes emission of a series specific signal for this purpose, for example, QBar3DSeries::selectedBarChanged(), which the application can handle. Bar and surface graphs support slice selection modes, where the selected row or column is drawn in a separate viewport as a pseudo-2D graph. This makes it easier to see the actual values of a single row or column. Bar graph additionally supports simply highlighting the whole row and/or column of the selected bar without opening the slice view. Bar graph also supports selecting/slicing a whole row and/or column by clicking the axis label, based on selection mode. When multiple series are added to a graph, selecting an item in one of them will clear the selection on other series. */ /*! \page qtdatavisualization_known_issues.html \title Qt Data Visualization Known Issues \list \li Some platforms like Android and WinRT cannot handle multiple native windows properly, so only the Qt Quick 2 graphs are available in practice for those platforms. \li Shadows are not supported with OpenGL ES2 (including Angle builds in Windows). \li Anti-aliasing doesn't work with OpenGL ES2 (including Angle builds in Windows). \li QCustom3DVolume items are not supported with OpenGL ES2 (including Angle builds in Windows). \li Surfaces with non-straight rows and columns do not always render properly. \li Q3DLight class (and Light3D QML item) are currently not usable for anything. \li Changing most of Q3DScene properties affecting subviewports currently has no effect. \li Widget based examples layout incorrectly in iOS. \li Reparenting a graph to an item in another QQuickWindow is not supported. \li Android builds of QML applications importing QtDataVisualization also require "QT += datavisualization" in the pro file. This is because Qt Data Visualization QML plugin has a dependency to Qt Data Visualization C++ library, which Qt Creator doesn't automatically add to the deployment package. \li Only OpenGL ES2 emulation is available for software renderer (that is, when using QCoreApplication::setAttribute(Qt::AA_UseSoftwareOpenGL)) \endlist */ /*! * \fn QSurfaceFormat QtDataVisualization::qDefaultSurfaceFormat(bool antialias = true) * \relates QAbstract3DGraph * * This convenience function can be used to create a custom surface format suitable for use by * Qt Data Visualization graphs. * * The \a antialias parameter specifies whether or not antialiasing is activated. * * Give the surface format returned by this function to the graph constructor (C++) or set * it as the window format for QQuickView (QML) before calling show on it. * * For example, disable antialiasing on C++ application: * * \code * #include * * // ... * * Q3DBars *graph = new Q3DBars(QtDataVisualization::qDefaultSurfaceFormat(false)); * \endcode * * For example, enable antialiasing for direct rendering modes on QML application: * * \code * #include * * // ... * * QQuickView viewer; * viewer.setFormat(QtDataVisualization::qDefaultSurfaceFormat()); * \endcode * * \note Antialiasing is not supported in OpenGL ES2 environments. */