diff options
Diffstat (limited to 'tests/auto/declarative/parserstress/tests/ecma/Expressions/11.13.2-2.js')
-rw-r--r-- | tests/auto/declarative/parserstress/tests/ecma/Expressions/11.13.2-2.js | 253 |
1 files changed, 0 insertions, 253 deletions
diff --git a/tests/auto/declarative/parserstress/tests/ecma/Expressions/11.13.2-2.js b/tests/auto/declarative/parserstress/tests/ecma/Expressions/11.13.2-2.js deleted file mode 100644 index 2d3b53630b..0000000000 --- a/tests/auto/declarative/parserstress/tests/ecma/Expressions/11.13.2-2.js +++ /dev/null @@ -1,253 +0,0 @@ -/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is Mozilla Communicator client code, released - * March 31, 1998. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1998 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ - -gTestfile = '11.13.2-2.js'; - -/** - File Name: 11.13.2-2js - ECMA Section: 11.13.2 Compound Assignment: /= - Description: - - *= /= %= += -= <<= >>= >>>= &= ^= |= - - 11.13.2 Compound assignment ( op= ) - - The production AssignmentExpression : - LeftHandSideExpression @ = AssignmentExpression, where @ represents one of - the operators indicated above, is evaluated as follows: - - 1. Evaluate LeftHandSideExpression. - 2. Call GetValue(Result(1)). - 3. Evaluate AssignmentExpression. - 4. Call GetValue(Result(3)). - 5. Apply operator @ to Result(2) and Result(4). - 6. Call PutValue(Result(1), Result(5)). - 7. Return Result(5). - - Author: christine@netscape.com - Date: 12 november 1997 -*/ -var SECTION = "11.13.2-2"; -var VERSION = "ECMA_1"; -startTest(); - -writeHeaderToLog( SECTION + " Compound Assignment: /="); - - -// NaN cases - -new TestCase( SECTION, - "VAR1 = NaN; VAR2=1; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = Number.NaN; VAR2=1; VAR1 /= VAR2") ); - -new TestCase( SECTION, - "VAR1 = NaN; VAR2=1; VAR1 /= VAR2; VAR1", - Number.NaN, - eval("VAR1 = Number.NaN; VAR2=1; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = NaN; VAR2=0; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = Number.NaN; VAR2=0; VAR1 /= VAR2") ); - -new TestCase( SECTION, - "VAR1 = NaN; VAR2=0; VAR1 /= VAR2; VAR1", - Number.NaN, - eval("VAR1 = Number.NaN; VAR2=0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2=NaN; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = 0; VAR2=Number.NaN; VAR1 /= VAR2") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2=NaN; VAR1 /= VAR2; VAR1", - Number.NaN, - eval("VAR1 = 0; VAR2=Number.NaN; VAR1 /= VAR2; VAR1") ); - -// number cases -new TestCase( SECTION, - "VAR1 = 0; VAR2=1; VAR1 /= VAR2", - 0, - eval("VAR1 = 0; VAR2=1; VAR1 /= VAR2") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2=1; VAR1 /= VAR2;VAR1", - 0, - eval("VAR1 = 0; VAR2=1; VAR1 /= VAR2;VAR1") ); - -new TestCase( SECTION, - "VAR1 = 0xFF; VAR2 = 0xA, VAR1 /= VAR2", - 25.5, - eval("VAR1 = 0XFF; VAR2 = 0XA, VAR1 /= VAR2") ); - -// special division cases - -new TestCase( SECTION, - "VAR1 = 0; VAR2= Infinity; VAR1 /= VAR2", - 0, - eval("VAR1 = 0; VAR2 = Number.POSITIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = -0; VAR2= Infinity; VAR1 /= VAR2", - 0, - eval("VAR1 = -0; VAR2 = Number.POSITIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = -0; VAR2= -Infinity; VAR1 /= VAR2", - 0, - eval("VAR1 = -0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2= -Infinity; VAR1 /= VAR2", - 0, - eval("VAR1 = 0; VAR2 = Number.NEGATIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2= Infinity; VAR2 /= VAR1", - Number.POSITIVE_INFINITY, - eval("VAR1 = 0; VAR2 = Number.POSITIVE_INFINITY; VAR2 /= VAR1; VAR2") ); - -new TestCase( SECTION, - "VAR1 = -0; VAR2= Infinity; VAR2 /= VAR1", - Number.NEGATIVE_INFINITY, - eval("VAR1 = -0; VAR2 = Number.POSITIVE_INFINITY; VAR2 /= VAR1; VAR2") ); - -new TestCase( SECTION, - "VAR1 = -0; VAR2= -Infinity; VAR2 /= VAR1", - Number.POSITIVE_INFINITY, - eval("VAR1 = -0; VAR2 = Number.NEGATIVE_INFINITY; VAR2 /= VAR1; VAR2") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2= -Infinity; VAR2 /= VAR1", - Number.NEGATIVE_INFINITY, - eval("VAR1 = 0; VAR2 = Number.NEGATIVE_INFINITY; VAR2 /= VAR1; VAR2") ); - -new TestCase( SECTION, - "VAR1 = Infinity; VAR2= Infinity; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = Infinity; VAR2= -Infinity; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = Number.POSITIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 =-Infinity; VAR2= Infinity; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.POSITIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 =-Infinity; VAR2=-Infinity; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = Number.NEGATIVE_INFINITY; VAR2 = Number.NEGATIVE_INFINITY; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2= 0; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = 0; VAR2 = 0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 0; VAR2= -0; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = 0; VAR2 = -0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = -0; VAR2= 0; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = -0; VAR2 = 0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = -0; VAR2= -0; VAR1 /= VAR2", - Number.NaN, - eval("VAR1 = -0; VAR2 = -0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 1; VAR2= 0; VAR1 /= VAR2", - Number.POSITIVE_INFINITY, - eval("VAR1 = 1; VAR2 = 0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = 1; VAR2= -0; VAR1 /= VAR2", - Number.NEGATIVE_INFINITY, - eval("VAR1 = 1; VAR2 = -0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = -1; VAR2= 0; VAR1 /= VAR2", - Number.NEGATIVE_INFINITY, - eval("VAR1 = -1; VAR2 = 0; VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = -1; VAR2= -0; VAR1 /= VAR2", - Number.POSITIVE_INFINITY, - eval("VAR1 = -1; VAR2 = -0; VAR1 /= VAR2; VAR1") ); - -// string cases -new TestCase( SECTION, - "VAR1 = 1000; VAR2 = '10', VAR1 /= VAR2; VAR1", - 100, - eval("VAR1 = 1000; VAR2 = '10', VAR1 /= VAR2; VAR1") ); - -new TestCase( SECTION, - "VAR1 = '1000'; VAR2 = 10, VAR1 /= VAR2; VAR1", - 100, - eval("VAR1 = '1000'; VAR2 = 10, VAR1 /= VAR2; VAR1") ); -/* - new TestCase( SECTION, "VAR1 = 10; VAR2 = '0XFF', VAR1 /= VAR2", 2550, eval("VAR1 = 10; VAR2 = '0XFF', VAR1 /= VAR2") ); - new TestCase( SECTION, "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 /= VAR2", 2550, eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 /= VAR2") ); - - new TestCase( SECTION, "VAR1 = '10'; VAR2 = '255', VAR1 /= VAR2", 2550, eval("VAR1 = '10'; VAR2 = '255', VAR1 /= VAR2") ); - new TestCase( SECTION, "VAR1 = '10'; VAR2 = '0XFF', VAR1 /= VAR2", 2550, eval("VAR1 = '10'; VAR2 = '0XFF', VAR1 /= VAR2") ); - new TestCase( SECTION, "VAR1 = '0xFF'; VAR2 = 0xA, VAR1 /= VAR2", 2550, eval("VAR1 = '0XFF'; VAR2 = 0XA, VAR1 /= VAR2") ); - - // boolean cases - new TestCase( SECTION, "VAR1 = true; VAR2 = false; VAR1 /= VAR2", 0, eval("VAR1 = true; VAR2 = false; VAR1 /= VAR2") ); - new TestCase( SECTION, "VAR1 = true; VAR2 = true; VAR1 /= VAR2", 1, eval("VAR1 = true; VAR2 = true; VAR1 /= VAR2") ); - - // object cases - new TestCase( SECTION, "VAR1 = new Boolean(true); VAR2 = 10; VAR1 /= VAR2;VAR1", 10, eval("VAR1 = new Boolean(true); VAR2 = 10; VAR1 /= VAR2; VAR1") ); - new TestCase( SECTION, "VAR1 = new Number(11); VAR2 = 10; VAR1 /= VAR2; VAR1", 110, eval("VAR1 = new Number(11); VAR2 = 10; VAR1 /= VAR2; VAR1") ); - new TestCase( SECTION, "VAR1 = new Number(11); VAR2 = new Number(10); VAR1 /= VAR2", 110, eval("VAR1 = new Number(11); VAR2 = new Number(10); VAR1 /= VAR2") ); - new TestCase( SECTION, "VAR1 = new String('15'); VAR2 = new String('0xF'); VAR1 /= VAR2", 255, eval("VAR1 = String('15'); VAR2 = new String('0xF'); VAR1 /= VAR2") ); - -*/ - -test(); - |