diff options
Diffstat (limited to 'tests/auto/declarative/parserstress/tests/ecma/Expressions/11.2.1-1.js')
| -rw-r--r-- | tests/auto/declarative/parserstress/tests/ecma/Expressions/11.2.1-1.js | 272 |
1 files changed, 0 insertions, 272 deletions
diff --git a/tests/auto/declarative/parserstress/tests/ecma/Expressions/11.2.1-1.js b/tests/auto/declarative/parserstress/tests/ecma/Expressions/11.2.1-1.js deleted file mode 100644 index 91e25b01f1..0000000000 --- a/tests/auto/declarative/parserstress/tests/ecma/Expressions/11.2.1-1.js +++ /dev/null @@ -1,272 +0,0 @@ -/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is Mozilla Communicator client code, released - * March 31, 1998. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1998 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ - -gTestfile = '11.2.1-1.js'; - -/** - File Name: 11.2.1-1.js - ECMA Section: 11.2.1 Property Accessors - Description: - - Properties are accessed by name, using either the dot notation: - MemberExpression . Identifier - CallExpression . Identifier - - or the bracket notation: MemberExpression [ Expression ] - CallExpression [ Expression ] - - The dot notation is explained by the following syntactic conversion: - MemberExpression . Identifier - is identical in its behavior to - MemberExpression [ <identifier-string> ] - and similarly - CallExpression . Identifier - is identical in its behavior to - CallExpression [ <identifier-string> ] - where <identifier-string> is a string literal containing the same sequence - of characters as the Identifier. - - The production MemberExpression : MemberExpression [ Expression ] is - evaluated as follows: - - 1. Evaluate MemberExpression. - 2. Call GetValue(Result(1)). - 3. Evaluate Expression. - 4. Call GetValue(Result(3)). - 5. Call ToObject(Result(2)). - 6. Call ToString(Result(4)). - 7. Return a value of type Reference whose base object is Result(5) and - whose property name is Result(6). - - The production CallExpression : CallExpression [ Expression ] is evaluated - in exactly the same manner, except that the contained CallExpression is - evaluated in step 1. - - Author: christine@netscape.com - Date: 12 november 1997 -*/ -var SECTION = "11.2.1-1"; -var VERSION = "ECMA_1"; -startTest(); -var TITLE = "Property Accessors"; -writeHeaderToLog( SECTION + " "+TITLE ); - -// go through all Native Function objects, methods, and properties and get their typeof. - -var PROPERTY = new Array(); -var p = 0; - -// properties and functions of the global object - -PROPERTY[p++] = new Property( "this", "NaN", "number" ); -PROPERTY[p++] = new Property( "this", "Infinity", "number" ); -PROPERTY[p++] = new Property( "this", "eval", "function" ); -PROPERTY[p++] = new Property( "this", "parseInt", "function" ); -PROPERTY[p++] = new Property( "this", "parseFloat", "function" ); -PROPERTY[p++] = new Property( "this", "escape", "function" ); -PROPERTY[p++] = new Property( "this", "unescape", "function" ); -PROPERTY[p++] = new Property( "this", "isNaN", "function" ); -PROPERTY[p++] = new Property( "this", "isFinite", "function" ); -PROPERTY[p++] = new Property( "this", "Object", "function" ); -PROPERTY[p++] = new Property( "this", "Number", "function" ); -PROPERTY[p++] = new Property( "this", "Function", "function" ); -PROPERTY[p++] = new Property( "this", "Array", "function" ); -PROPERTY[p++] = new Property( "this", "String", "function" ); -PROPERTY[p++] = new Property( "this", "Boolean", "function" ); -PROPERTY[p++] = new Property( "this", "Date", "function" ); -PROPERTY[p++] = new Property( "this", "Math", "object" ); - -// properties and methods of Object objects - -PROPERTY[p++] = new Property( "Object", "prototype", "object" ); -PROPERTY[p++] = new Property( "Object", "toString", "function" ); -PROPERTY[p++] = new Property( "Object", "valueOf", "function" ); -PROPERTY[p++] = new Property( "Object", "constructor", "function" ); - -// properties of the Function object - -PROPERTY[p++] = new Property( "Function", "prototype", "function" ); -PROPERTY[p++] = new Property( "Function.prototype", "toString", "function" ); -PROPERTY[p++] = new Property( "Function.prototype", "length", "number" ); -PROPERTY[p++] = new Property( "Function.prototype", "valueOf", "function" ); - -Function.prototype.myProperty = "hi"; - -PROPERTY[p++] = new Property( "Function.prototype", "myProperty", "string" ); - -// properties of the Array object -PROPERTY[p++] = new Property( "Array", "prototype", "object" ); -PROPERTY[p++] = new Property( "Array", "length", "number" ); -PROPERTY[p++] = new Property( "Array.prototype", "constructor", "function" ); -PROPERTY[p++] = new Property( "Array.prototype", "toString", "function" ); -PROPERTY[p++] = new Property( "Array.prototype", "join", "function" ); -PROPERTY[p++] = new Property( "Array.prototype", "reverse", "function" ); -PROPERTY[p++] = new Property( "Array.prototype", "sort", "function" ); - -// properties of the String object -PROPERTY[p++] = new Property( "String", "prototype", "object" ); -PROPERTY[p++] = new Property( "String", "fromCharCode", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "toString", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "constructor", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "valueOf", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "charAt", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "charCodeAt", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "indexOf", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "lastIndexOf", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "split", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "substring", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "toLowerCase", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "toUpperCase", "function" ); -PROPERTY[p++] = new Property( "String.prototype", "length", "number" ); - -// properties of the Boolean object -PROPERTY[p++] = new Property( "Boolean", "prototype", "object" ); -PROPERTY[p++] = new Property( "Boolean", "constructor", "function" ); -PROPERTY[p++] = new Property( "Boolean.prototype", "valueOf", "function" ); -PROPERTY[p++] = new Property( "Boolean.prototype", "toString", "function" ); - -// properties of the Number object - -PROPERTY[p++] = new Property( "Number", "MAX_VALUE", "number" ); -PROPERTY[p++] = new Property( "Number", "MIN_VALUE", "number" ); -PROPERTY[p++] = new Property( "Number", "NaN", "number" ); -PROPERTY[p++] = new Property( "Number", "NEGATIVE_INFINITY", "number" ); -PROPERTY[p++] = new Property( "Number", "POSITIVE_INFINITY", "number" ); -PROPERTY[p++] = new Property( "Number.prototype", "toString", "function" ); -PROPERTY[p++] = new Property( "Number.prototype", "constructor", "function" ); -PROPERTY[p++] = new Property( "Number.prototype", "valueOf", "function" ); - -// properties of the Math Object. -PROPERTY[p++] = new Property( "Math", "E", "number" ); -PROPERTY[p++] = new Property( "Math", "LN10", "number" ); -PROPERTY[p++] = new Property( "Math", "LN2", "number" ); -PROPERTY[p++] = new Property( "Math", "LOG2E", "number" ); -PROPERTY[p++] = new Property( "Math", "LOG10E", "number" ); -PROPERTY[p++] = new Property( "Math", "PI", "number" ); -PROPERTY[p++] = new Property( "Math", "SQRT1_2", "number" ); -PROPERTY[p++] = new Property( "Math", "SQRT2", "number" ); -PROPERTY[p++] = new Property( "Math", "abs", "function" ); -PROPERTY[p++] = new Property( "Math", "acos", "function" ); -PROPERTY[p++] = new Property( "Math", "asin", "function" ); -PROPERTY[p++] = new Property( "Math", "atan", "function" ); -PROPERTY[p++] = new Property( "Math", "atan2", "function" ); -PROPERTY[p++] = new Property( "Math", "ceil", "function" ); -PROPERTY[p++] = new Property( "Math", "cos", "function" ); -PROPERTY[p++] = new Property( "Math", "exp", "function" ); -PROPERTY[p++] = new Property( "Math", "floor", "function" ); -PROPERTY[p++] = new Property( "Math", "log", "function" ); -PROPERTY[p++] = new Property( "Math", "max", "function" ); -PROPERTY[p++] = new Property( "Math", "min", "function" ); -PROPERTY[p++] = new Property( "Math", "pow", "function" ); -PROPERTY[p++] = new Property( "Math", "random", "function" ); -PROPERTY[p++] = new Property( "Math", "round", "function" ); -PROPERTY[p++] = new Property( "Math", "sin", "function" ); -PROPERTY[p++] = new Property( "Math", "sqrt", "function" ); -PROPERTY[p++] = new Property( "Math", "tan", "function" ); - -// properties of the Date object -PROPERTY[p++] = new Property( "Date", "parse", "function" ); -PROPERTY[p++] = new Property( "Date", "prototype", "object" ); -PROPERTY[p++] = new Property( "Date", "UTC", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "constructor", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "toString", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "valueOf", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getTime", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getYear", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getFullYear", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCFullYear", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getMonth", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCMonth", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getDate", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCDate", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getDay", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCDay", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getHours", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCHours", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getMinutes", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCMinutes", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getSeconds", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCSeconds", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getMilliseconds","function" ); -PROPERTY[p++] = new Property( "Date.prototype", "getUTCMilliseconds", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setTime", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setMilliseconds","function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCMilliseconds", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setSeconds", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCSeconds", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setMinutes", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCMinutes", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setHours", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCHours", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setDate", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCDate", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setMonth", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCMonth", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setFullYear", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setUTCFullYear", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "setYear", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "toLocaleString", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "toUTCString", "function" ); -PROPERTY[p++] = new Property( "Date.prototype", "toGMTString", "function" ); - -for ( var i = 0, RESULT; i < PROPERTY.length; i++ ) { - RESULT = eval("typeof " + PROPERTY[i].object + "." + PROPERTY[i].name ); - - new TestCase( SECTION, - "typeof " + PROPERTY[i].object + "." + PROPERTY[i].name, - PROPERTY[i].type, - RESULT ); - - RESULT = eval("typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']"); - - new TestCase( SECTION, - "typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']", - PROPERTY[i].type, - RESULT ); -} - -test(); - -function MyObject( arg0, arg1, arg2, arg3, arg4 ) { - this.name = arg0; -} -function Property( object, name, type ) { - this.object = object; - this.name = name; - this.type = type; -} |