diff options
Diffstat (limited to 'tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js')
| -rw-r--r-- | tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js | 441 |
1 files changed, 0 insertions, 441 deletions
diff --git a/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js b/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js deleted file mode 100644 index 56bf83adcc..0000000000 --- a/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js +++ /dev/null @@ -1,441 +0,0 @@ -/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is Mozilla Communicator client code, released - * March 31, 1998. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1998 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ - -gTestfile = '15.1.2.3-1.js'; - -/** - File Name: 15.1.2.3.js - ECMA Section: 15.1.2.3 Function properties of the global object: - parseFloat( string ) - - Description: The parseFloat function produces a number value dictated - by the interpretation of the contents of the string - argument defined as a decimal literal. - - When the parseFloat function is called, the following - steps are taken: - - 1. Call ToString( string ). - 2. Remove leading whitespace Result(1). - 3. If neither Result(2) nor any prefix of Result(2) - satisfies the syntax of a StrDecimalLiteral, - return NaN. - 4. Compute the longest prefix of Result(2) which might - be Resusult(2) itself, that satisfies the syntax of - a StrDecimalLiteral - 5. Return the number value for the MV of Result(4). - - Note that parseFloate may interpret only a leading - portion of the string as a number value; it ignores any - characters that cannot be interpreted as part of the - notation of a decimal literal, and no indication is given - that such characters were ignored. - - StrDecimalLiteral:: - Infinity - DecimalDigits.DecimalDigits opt ExponentPart opt - .DecimalDigits ExponentPart opt - DecimalDigits ExponentPart opt - - Author: christine@netscape.com - Date: 28 october 1997 - -*/ - -var SECTION = "15.1.2.3-1"; -var VERSION = "ECMA_1"; -var TITLE = "parseFloat(string)"; -var BUGNUMBER="none"; - -startTest(); -writeHeaderToLog( SECTION + " "+ TITLE); - -new TestCase( SECTION, "parseFloat.length", 1, parseFloat.length ); - -new TestCase( SECTION, "parseFloat.length = null; parseFloat.length", 1, eval("parseFloat.length = null; parseFloat.length") ); -new TestCase( SECTION, "delete parseFloat.length", false, delete parseFloat.length ); -new TestCase( SECTION, "delete parseFloat.length; parseFloat.length", 1, eval("delete parseFloat.length; parseFloat.length") ); -new TestCase( SECTION, "var MYPROPS=''; for ( var p in parseFloat ) { MYPROPS += p }; MYPROPS", "prototype", eval("var MYPROPS=''; for ( var p in parseFloat ) { MYPROPS += p }; MYPROPS") ); - -new TestCase( SECTION, "parseFloat()", Number.NaN, parseFloat() ); -new TestCase( SECTION, "parseFloat('')", Number.NaN, parseFloat('') ); - -new TestCase( SECTION, "parseFloat(' ')", Number.NaN, parseFloat(' ') ); -new TestCase( SECTION, "parseFloat(true)", Number.NaN, parseFloat(true) ); -new TestCase( SECTION, "parseFloat(false)", Number.NaN, parseFloat(false) ); -new TestCase( SECTION, "parseFloat('string')", Number.NaN, parseFloat("string") ); - -new TestCase( SECTION, "parseFloat(' Infinity')", Infinity, parseFloat("Infinity") ); -new TestCase( SECTION, "parseFloat(' Infinity ')", Infinity, parseFloat(' Infinity ') ); - -new TestCase( SECTION, "parseFloat('Infinity')", Infinity, parseFloat("Infinity") ); -new TestCase( SECTION, "parseFloat(Infinity)", Infinity, parseFloat(Infinity) ); - - -new TestCase( SECTION, "parseFloat(' +Infinity')", +Infinity, parseFloat("+Infinity") ); -new TestCase( SECTION, "parseFloat(' -Infinity ')", -Infinity, parseFloat(' -Infinity ') ); - -new TestCase( SECTION, "parseFloat('+Infinity')", +Infinity, parseFloat("+Infinity") ); -new TestCase( SECTION, "parseFloat(-Infinity)", -Infinity, parseFloat(-Infinity) ); - -new TestCase( SECTION, "parseFloat('0')", 0, parseFloat("0") ); -new TestCase( SECTION, "parseFloat('-0')", -0, parseFloat("-0") ); -new TestCase( SECTION, "parseFloat('+0')", 0, parseFloat("+0") ); - -new TestCase( SECTION, "parseFloat('1')", 1, parseFloat("1") ); -new TestCase( SECTION, "parseFloat('-1')", -1, parseFloat("-1") ); -new TestCase( SECTION, "parseFloat('+1')", 1, parseFloat("+1") ); - -new TestCase( SECTION, "parseFloat('2')", 2, parseFloat("2") ); -new TestCase( SECTION, "parseFloat('-2')", -2, parseFloat("-2") ); -new TestCase( SECTION, "parseFloat('+2')", 2, parseFloat("+2") ); - -new TestCase( SECTION, "parseFloat('3')", 3, parseFloat("3") ); -new TestCase( SECTION, "parseFloat('-3')", -3, parseFloat("-3") ); -new TestCase( SECTION, "parseFloat('+3')", 3, parseFloat("+3") ); - -new TestCase( SECTION, "parseFloat('4')", 4, parseFloat("4") ); -new TestCase( SECTION, "parseFloat('-4')", -4, parseFloat("-4") ); -new TestCase( SECTION, "parseFloat('+4')", 4, parseFloat("+4") ); - -new TestCase( SECTION, "parseFloat('5')", 5, parseFloat("5") ); -new TestCase( SECTION, "parseFloat('-5')", -5, parseFloat("-5") ); -new TestCase( SECTION, "parseFloat('+5')", 5, parseFloat("+5") ); - -new TestCase( SECTION, "parseFloat('6')", 6, parseFloat("6") ); -new TestCase( SECTION, "parseFloat('-6')", -6, parseFloat("-6") ); -new TestCase( SECTION, "parseFloat('+6')", 6, parseFloat("+6") ); - -new TestCase( SECTION, "parseFloat('7')", 7, parseFloat("7") ); -new TestCase( SECTION, "parseFloat('-7')", -7, parseFloat("-7") ); -new TestCase( SECTION, "parseFloat('+7')", 7, parseFloat("+7") ); - -new TestCase( SECTION, "parseFloat('8')", 8, parseFloat("8") ); -new TestCase( SECTION, "parseFloat('-8')", -8, parseFloat("-8") ); -new TestCase( SECTION, "parseFloat('+8')", 8, parseFloat("+8") ); - -new TestCase( SECTION, "parseFloat('9')", 9, parseFloat("9") ); -new TestCase( SECTION, "parseFloat('-9')", -9, parseFloat("-9") ); -new TestCase( SECTION, "parseFloat('+9')", 9, parseFloat("+9") ); - -new TestCase( SECTION, "parseFloat('3.14159')", 3.14159, parseFloat("3.14159") ); -new TestCase( SECTION, "parseFloat('-3.14159')", -3.14159, parseFloat("-3.14159") ); -new TestCase( SECTION, "parseFloat('+3.14159')", 3.14159, parseFloat("+3.14159") ); - -new TestCase( SECTION, "parseFloat('3.')", 3, parseFloat("3.") ); -new TestCase( SECTION, "parseFloat('-3.')", -3, parseFloat("-3.") ); -new TestCase( SECTION, "parseFloat('+3.')", 3, parseFloat("+3.") ); - -new TestCase( SECTION, "parseFloat('3.e1')", 30, parseFloat("3.e1") ); -new TestCase( SECTION, "parseFloat('-3.e1')", -30, parseFloat("-3.e1") ); -new TestCase( SECTION, "parseFloat('+3.e1')", 30, parseFloat("+3.e1") ); - -new TestCase( SECTION, "parseFloat('3.e+1')", 30, parseFloat("3.e+1") ); -new TestCase( SECTION, "parseFloat('-3.e+1')", -30, parseFloat("-3.e+1") ); -new TestCase( SECTION, "parseFloat('+3.e+1')", 30, parseFloat("+3.e+1") ); - -new TestCase( SECTION, "parseFloat('3.e-1')", .30, parseFloat("3.e-1") ); -new TestCase( SECTION, "parseFloat('-3.e-1')", -.30, parseFloat("-3.e-1") ); -new TestCase( SECTION, "parseFloat('+3.e-1')", .30, parseFloat("+3.e-1") ); - -// StrDecimalLiteral::: .DecimalDigits ExponentPart opt - -new TestCase( SECTION, "parseFloat('.00001')", 0.00001, parseFloat(".00001") ); -new TestCase( SECTION, "parseFloat('+.00001')", 0.00001, parseFloat("+.00001") ); -new TestCase( SECTION, "parseFloat('-0.0001')", -0.00001, parseFloat("-.00001") ); - -new TestCase( SECTION, "parseFloat('.01e2')", 1, parseFloat(".01e2") ); -new TestCase( SECTION, "parseFloat('+.01e2')", 1, parseFloat("+.01e2") ); -new TestCase( SECTION, "parseFloat('-.01e2')", -1, parseFloat("-.01e2") ); - -new TestCase( SECTION, "parseFloat('.01e+2')", 1, parseFloat(".01e+2") ); -new TestCase( SECTION, "parseFloat('+.01e+2')", 1, parseFloat("+.01e+2") ); -new TestCase( SECTION, "parseFloat('-.01e+2')", -1, parseFloat("-.01e+2") ); - -new TestCase( SECTION, "parseFloat('.01e-2')", 0.0001, parseFloat(".01e-2") ); -new TestCase( SECTION, "parseFloat('+.01e-2')", 0.0001, parseFloat("+.01e-2") ); -new TestCase( SECTION, "parseFloat('-.01e-2')", -0.0001, parseFloat("-.01e-2") ); - -// StrDecimalLiteral::: DecimalDigits ExponentPart opt - -new TestCase( SECTION, "parseFloat('1234e5')", 123400000, parseFloat("1234e5") ); -new TestCase( SECTION, "parseFloat('+1234e5')", 123400000, parseFloat("+1234e5") ); -new TestCase( SECTION, "parseFloat('-1234e5')", -123400000, parseFloat("-1234e5") ); - -new TestCase( SECTION, "parseFloat('1234e+5')", 123400000, parseFloat("1234e+5") ); -new TestCase( SECTION, "parseFloat('+1234e+5')", 123400000, parseFloat("+1234e+5") ); -new TestCase( SECTION, "parseFloat('-1234e+5')", -123400000, parseFloat("-1234e+5") ); - -new TestCase( SECTION, "parseFloat('1234e-5')", 0.01234, parseFloat("1234e-5") ); -new TestCase( SECTION, "parseFloat('+1234e-5')", 0.01234, parseFloat("+1234e-5") ); -new TestCase( SECTION, "parseFloat('-1234e-5')", -0.01234, parseFloat("-1234e-5") ); - - -new TestCase( SECTION, "parseFloat(0)", 0, parseFloat(0) ); -new TestCase( SECTION, "parseFloat(-0)", -0, parseFloat(-0) ); - -new TestCase( SECTION, "parseFloat(1)", 1, parseFloat(1) ); -new TestCase( SECTION, "parseFloat(-1)", -1, parseFloat(-1) ); - -new TestCase( SECTION, "parseFloat(2)", 2, parseFloat(2) ); -new TestCase( SECTION, "parseFloat(-2)", -2, parseFloat(-2) ); - -new TestCase( SECTION, "parseFloat(3)", 3, parseFloat(3) ); -new TestCase( SECTION, "parseFloat(-3)", -3, parseFloat(-3) ); - -new TestCase( SECTION, "parseFloat(4)", 4, parseFloat(4) ); -new TestCase( SECTION, "parseFloat(-4)", -4, parseFloat(-4) ); - -new TestCase( SECTION, "parseFloat(5)", 5, parseFloat(5) ); -new TestCase( SECTION, "parseFloat(-5)", -5, parseFloat(-5) ); - -new TestCase( SECTION, "parseFloat(6)", 6, parseFloat(6) ); -new TestCase( SECTION, "parseFloat(-6)", -6, parseFloat(-6) ); - -new TestCase( SECTION, "parseFloat(7)", 7, parseFloat(7) ); -new TestCase( SECTION, "parseFloat(-7)", -7, parseFloat(-7) ); - -new TestCase( SECTION, "parseFloat(8)", 8, parseFloat(8) ); -new TestCase( SECTION, "parseFloat(-8)", -8, parseFloat(-8) ); - -new TestCase( SECTION, "parseFloat(9)", 9, parseFloat(9) ); -new TestCase( SECTION, "parseFloat(-9)", -9, parseFloat(-9) ); - -new TestCase( SECTION, "parseFloat(3.14159)", 3.14159, parseFloat(3.14159) ); -new TestCase( SECTION, "parseFloat(-3.14159)", -3.14159, parseFloat(-3.14159) ); - -new TestCase( SECTION, "parseFloat(3.)", 3, parseFloat(3.) ); -new TestCase( SECTION, "parseFloat(-3.)", -3, parseFloat(-3.) ); - -new TestCase( SECTION, "parseFloat(3.e1)", 30, parseFloat(3.e1) ); -new TestCase( SECTION, "parseFloat(-3.e1)", -30, parseFloat(-3.e1) ); - -new TestCase( SECTION, "parseFloat(3.e+1)", 30, parseFloat(3.e+1) ); -new TestCase( SECTION, "parseFloat(-3.e+1)", -30, parseFloat(-3.e+1) ); - -new TestCase( SECTION, "parseFloat(3.e-1)", .30, parseFloat(3.e-1) ); -new TestCase( SECTION, "parseFloat(-3.e-1)", -.30, parseFloat(-3.e-1) ); - - -new TestCase( SECTION, "parseFloat(3.E1)", 30, parseFloat(3.E1) ); -new TestCase( SECTION, "parseFloat(-3.E1)", -30, parseFloat(-3.E1) ); - -new TestCase( SECTION, "parseFloat(3.E+1)", 30, parseFloat(3.E+1) ); -new TestCase( SECTION, "parseFloat(-3.E+1)", -30, parseFloat(-3.E+1) ); - -new TestCase( SECTION, "parseFloat(3.E-1)", .30, parseFloat(3.E-1) ); -new TestCase( SECTION, "parseFloat(-3.E-1)", -.30, parseFloat(-3.E-1) ); - -// StrDecimalLiteral::: .DecimalDigits ExponentPart opt - -new TestCase( SECTION, "parseFloat(.00001)", 0.00001, parseFloat(.00001) ); -new TestCase( SECTION, "parseFloat(-0.0001)", -0.00001, parseFloat(-.00001) ); - -new TestCase( SECTION, "parseFloat(.01e2)", 1, parseFloat(.01e2) ); -new TestCase( SECTION, "parseFloat(-.01e2)", -1, parseFloat(-.01e2) ); - -new TestCase( SECTION, "parseFloat(.01e+2)", 1, parseFloat(.01e+2) ); -new TestCase( SECTION, "parseFloat(-.01e+2)", -1, parseFloat(-.01e+2) ); - -new TestCase( SECTION, "parseFloat(.01e-2)", 0.0001, parseFloat(.01e-2) ); -new TestCase( SECTION, "parseFloat(-.01e-2)", -0.0001, parseFloat(-.01e-2) ); - -// StrDecimalLiteral::: DecimalDigits ExponentPart opt - -new TestCase( SECTION, "parseFloat(1234e5)", 123400000, parseFloat(1234e5) ); -new TestCase( SECTION, "parseFloat(-1234e5)", -123400000, parseFloat(-1234e5) ); - -new TestCase( SECTION, "parseFloat(1234e+5)", 123400000, parseFloat(1234e+5) ); -new TestCase( SECTION, "parseFloat(-1234e+5)", -123400000, parseFloat(-1234e+5) ); - -new TestCase( SECTION, "parseFloat(1234e-5)", 0.01234, parseFloat(1234e-5) ); -new TestCase( SECTION, "parseFloat(-1234e-5)", -0.01234, parseFloat(-1234e-5) ); - -// hex cases should all return 0 (0 is the longest string that satisfies a StringDecimalLiteral) - -new TestCase( SECTION, "parseFloat('0x0')", 0, parseFloat("0x0")); -new TestCase( SECTION, "parseFloat('0x1')", 0, parseFloat("0x1")); -new TestCase( SECTION, "parseFloat('0x2')", 0, parseFloat("0x2")); -new TestCase( SECTION, "parseFloat('0x3')", 0, parseFloat("0x3")); -new TestCase( SECTION, "parseFloat('0x4')", 0, parseFloat("0x4")); -new TestCase( SECTION, "parseFloat('0x5')", 0, parseFloat("0x5")); -new TestCase( SECTION, "parseFloat('0x6')", 0, parseFloat("0x6")); -new TestCase( SECTION, "parseFloat('0x7')", 0, parseFloat("0x7")); -new TestCase( SECTION, "parseFloat('0x8')", 0, parseFloat("0x8")); -new TestCase( SECTION, "parseFloat('0x9')", 0, parseFloat("0x9")); -new TestCase( SECTION, "parseFloat('0xa')", 0, parseFloat("0xa")); -new TestCase( SECTION, "parseFloat('0xb')", 0, parseFloat("0xb")); -new TestCase( SECTION, "parseFloat('0xc')", 0, parseFloat("0xc")); -new TestCase( SECTION, "parseFloat('0xd')", 0, parseFloat("0xd")); -new TestCase( SECTION, "parseFloat('0xe')", 0, parseFloat("0xe")); -new TestCase( SECTION, "parseFloat('0xf')", 0, parseFloat("0xf")); -new TestCase( SECTION, "parseFloat('0xA')", 0, parseFloat("0xA")); -new TestCase( SECTION, "parseFloat('0xB')", 0, parseFloat("0xB")); -new TestCase( SECTION, "parseFloat('0xC')", 0, parseFloat("0xC")); -new TestCase( SECTION, "parseFloat('0xD')", 0, parseFloat("0xD")); -new TestCase( SECTION, "parseFloat('0xE')", 0, parseFloat("0xE")); -new TestCase( SECTION, "parseFloat('0xF')", 0, parseFloat("0xF")); - -new TestCase( SECTION, "parseFloat('0X0')", 0, parseFloat("0X0")); -new TestCase( SECTION, "parseFloat('0X1')", 0, parseFloat("0X1")); -new TestCase( SECTION, "parseFloat('0X2')", 0, parseFloat("0X2")); -new TestCase( SECTION, "parseFloat('0X3')", 0, parseFloat("0X3")); -new TestCase( SECTION, "parseFloat('0X4')", 0, parseFloat("0X4")); -new TestCase( SECTION, "parseFloat('0X5')", 0, parseFloat("0X5")); -new TestCase( SECTION, "parseFloat('0X6')", 0, parseFloat("0X6")); -new TestCase( SECTION, "parseFloat('0X7')", 0, parseFloat("0X7")); -new TestCase( SECTION, "parseFloat('0X8')", 0, parseFloat("0X8")); -new TestCase( SECTION, "parseFloat('0X9')", 0, parseFloat("0X9")); -new TestCase( SECTION, "parseFloat('0Xa')", 0, parseFloat("0Xa")); -new TestCase( SECTION, "parseFloat('0Xb')", 0, parseFloat("0Xb")); -new TestCase( SECTION, "parseFloat('0Xc')", 0, parseFloat("0Xc")); -new TestCase( SECTION, "parseFloat('0Xd')", 0, parseFloat("0Xd")); -new TestCase( SECTION, "parseFloat('0Xe')", 0, parseFloat("0Xe")); -new TestCase( SECTION, "parseFloat('0Xf')", 0, parseFloat("0Xf")); -new TestCase( SECTION, "parseFloat('0XA')", 0, parseFloat("0XA")); -new TestCase( SECTION, "parseFloat('0XB')", 0, parseFloat("0XB")); -new TestCase( SECTION, "parseFloat('0XC')", 0, parseFloat("0XC")); -new TestCase( SECTION, "parseFloat('0XD')", 0, parseFloat("0XD")); -new TestCase( SECTION, "parseFloat('0XE')", 0, parseFloat("0XE")); -new TestCase( SECTION, "parseFloat('0XF')", 0, parseFloat("0XF")); -new TestCase( SECTION, "parseFloat(' 0XF ')", 0, parseFloat(" 0XF ")); - -// hex literals should still succeed - -new TestCase( SECTION, "parseFloat(0x0)", 0, parseFloat(0x0)); -new TestCase( SECTION, "parseFloat(0x1)", 1, parseFloat(0x1)); -new TestCase( SECTION, "parseFloat(0x2)", 2, parseFloat(0x2)); -new TestCase( SECTION, "parseFloat(0x3)", 3, parseFloat(0x3)); -new TestCase( SECTION, "parseFloat(0x4)", 4, parseFloat(0x4)); -new TestCase( SECTION, "parseFloat(0x5)", 5, parseFloat(0x5)); -new TestCase( SECTION, "parseFloat(0x6)", 6, parseFloat(0x6)); -new TestCase( SECTION, "parseFloat(0x7)", 7, parseFloat(0x7)); -new TestCase( SECTION, "parseFloat(0x8)", 8, parseFloat(0x8)); -new TestCase( SECTION, "parseFloat(0x9)", 9, parseFloat(0x9)); -new TestCase( SECTION, "parseFloat(0xa)", 10, parseFloat(0xa)); -new TestCase( SECTION, "parseFloat(0xb)", 11, parseFloat(0xb)); -new TestCase( SECTION, "parseFloat(0xc)", 12, parseFloat(0xc)); -new TestCase( SECTION, "parseFloat(0xd)", 13, parseFloat(0xd)); -new TestCase( SECTION, "parseFloat(0xe)", 14, parseFloat(0xe)); -new TestCase( SECTION, "parseFloat(0xf)", 15, parseFloat(0xf)); -new TestCase( SECTION, "parseFloat(0xA)", 10, parseFloat(0xA)); -new TestCase( SECTION, "parseFloat(0xB)", 11, parseFloat(0xB)); -new TestCase( SECTION, "parseFloat(0xC)", 12, parseFloat(0xC)); -new TestCase( SECTION, "parseFloat(0xD)", 13, parseFloat(0xD)); -new TestCase( SECTION, "parseFloat(0xE)", 14, parseFloat(0xE)); -new TestCase( SECTION, "parseFloat(0xF)", 15, parseFloat(0xF)); - -new TestCase( SECTION, "parseFloat(0X0)", 0, parseFloat(0X0)); -new TestCase( SECTION, "parseFloat(0X1)", 1, parseFloat(0X1)); -new TestCase( SECTION, "parseFloat(0X2)", 2, parseFloat(0X2)); -new TestCase( SECTION, "parseFloat(0X3)", 3, parseFloat(0X3)); -new TestCase( SECTION, "parseFloat(0X4)", 4, parseFloat(0X4)); -new TestCase( SECTION, "parseFloat(0X5)", 5, parseFloat(0X5)); -new TestCase( SECTION, "parseFloat(0X6)", 6, parseFloat(0X6)); -new TestCase( SECTION, "parseFloat(0X7)", 7, parseFloat(0X7)); -new TestCase( SECTION, "parseFloat(0X8)", 8, parseFloat(0X8)); -new TestCase( SECTION, "parseFloat(0X9)", 9, parseFloat(0X9)); -new TestCase( SECTION, "parseFloat(0Xa)", 10, parseFloat(0Xa)); -new TestCase( SECTION, "parseFloat(0Xb)", 11, parseFloat(0Xb)); -new TestCase( SECTION, "parseFloat(0Xc)", 12, parseFloat(0Xc)); -new TestCase( SECTION, "parseFloat(0Xd)", 13, parseFloat(0Xd)); -new TestCase( SECTION, "parseFloat(0Xe)", 14, parseFloat(0Xe)); -new TestCase( SECTION, "parseFloat(0Xf)", 15, parseFloat(0Xf)); -new TestCase( SECTION, "parseFloat(0XA)", 10, parseFloat(0XA)); -new TestCase( SECTION, "parseFloat(0XB)", 11, parseFloat(0XB)); -new TestCase( SECTION, "parseFloat(0XC)", 12, parseFloat(0XC)); -new TestCase( SECTION, "parseFloat(0XD)", 13, parseFloat(0XD)); -new TestCase( SECTION, "parseFloat(0XE)", 14, parseFloat(0XE)); -new TestCase( SECTION, "parseFloat(0XF)", 15, parseFloat(0XF)); - - -// A StringNumericLiteral may not use octal notation - -new TestCase( SECTION, "parseFloat('00')", 0, parseFloat("00")); -new TestCase( SECTION, "parseFloat('01')", 1, parseFloat("01")); -new TestCase( SECTION, "parseFloat('02')", 2, parseFloat("02")); -new TestCase( SECTION, "parseFloat('03')", 3, parseFloat("03")); -new TestCase( SECTION, "parseFloat('04')", 4, parseFloat("04")); -new TestCase( SECTION, "parseFloat('05')", 5, parseFloat("05")); -new TestCase( SECTION, "parseFloat('06')", 6, parseFloat("06")); -new TestCase( SECTION, "parseFloat('07')", 7, parseFloat("07")); -new TestCase( SECTION, "parseFloat('010')", 10, parseFloat("010")); -new TestCase( SECTION, "parseFloat('011')", 11, parseFloat("011")); - -// A StringNumericLIteral may have any number of leading 0 digits - -new TestCase( SECTION, "parseFloat('001')", 1, parseFloat("001")); -new TestCase( SECTION, "parseFloat('0001')", 1, parseFloat("0001")); -new TestCase( SECTION, "parseFloat(' 0001 ')", 1, parseFloat(" 0001 ")); - -// an octal numeric literal should be treated as an octal - -new TestCase( SECTION, "parseFloat(00)", 0, parseFloat(00)); -new TestCase( SECTION, "parseFloat(01)", 1, parseFloat(01)); -new TestCase( SECTION, "parseFloat(02)", 2, parseFloat(02)); -new TestCase( SECTION, "parseFloat(03)", 3, parseFloat(03)); -new TestCase( SECTION, "parseFloat(04)", 4, parseFloat(04)); -new TestCase( SECTION, "parseFloat(05)", 5, parseFloat(05)); -new TestCase( SECTION, "parseFloat(06)", 6, parseFloat(06)); -new TestCase( SECTION, "parseFloat(07)", 7, parseFloat(07)); -new TestCase( SECTION, "parseFloat(010)", 8, parseFloat(010)); -new TestCase( SECTION, "parseFloat(011)", 9, parseFloat(011)); - -// A StringNumericLIteral may have any number of leading 0 digits - -new TestCase( SECTION, "parseFloat(001)", 1, parseFloat(001)); -new TestCase( SECTION, "parseFloat(0001)", 1, parseFloat(0001)); - -// make sure it's reflexive -new TestCase( SECTION, "parseFloat(Math.PI)", Math.PI, parseFloat(Math.PI)); -new TestCase( SECTION, "parseFloat(Math.LN2)", Math.LN2, parseFloat(Math.LN2)); -new TestCase( SECTION, "parseFloat(Math.LN10)", Math.LN10, parseFloat(Math.LN10)); -new TestCase( SECTION, "parseFloat(Math.LOG2E)", Math.LOG2E, parseFloat(Math.LOG2E)); -new TestCase( SECTION, "parseFloat(Math.LOG10E)", Math.LOG10E, parseFloat(Math.LOG10E)); -new TestCase( SECTION, "parseFloat(Math.SQRT2)", Math.SQRT2, parseFloat(Math.SQRT2)); -new TestCase( SECTION, "parseFloat(Math.SQRT1_2)", Math.SQRT1_2, parseFloat(Math.SQRT1_2)); - -new TestCase( SECTION, "parseFloat(Math.PI+'')", Math.PI, parseFloat(Math.PI+'')); -new TestCase( SECTION, "parseFloat(Math.LN2+'')", Math.LN2, parseFloat(Math.LN2+'')); -new TestCase( SECTION, "parseFloat(Math.LN10+'')", Math.LN10, parseFloat(Math.LN10+'')); -new TestCase( SECTION, "parseFloat(Math.LOG2E+'')", Math.LOG2E, parseFloat(Math.LOG2E+'')); -new TestCase( SECTION, "parseFloat(Math.LOG10E+'')", Math.LOG10E, parseFloat(Math.LOG10E+'')); -new TestCase( SECTION, "parseFloat(Math.SQRT2+'')", Math.SQRT2, parseFloat(Math.SQRT2+'')); -new TestCase( SECTION, "parseFloat(Math.SQRT1_2+'')", Math.SQRT1_2, parseFloat(Math.SQRT1_2+'')); - -test(); |