aboutsummaryrefslogtreecommitdiffstats
path: root/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.5-2.js
diff options
context:
space:
mode:
Diffstat (limited to 'tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.5-2.js')
-rw-r--r--tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.5-2.js183
1 files changed, 0 insertions, 183 deletions
diff --git a/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.5-2.js b/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.5-2.js
deleted file mode 100644
index 99b58752b2..0000000000
--- a/tests/auto/declarative/parserstress/tests/ecma/GlobalObject/15.1.2.5-2.js
+++ /dev/null
@@ -1,183 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Communicator client code, released
- * March 31, 1998.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-gTestfile = '15.1.2.5-2.js';
-
-/**
- File Name: 15.1.2.5-2.js
- ECMA Section: 15.1.2.5 Function properties of the global object
- unescape( string )
- Description:
-
- This tests the cases where there are fewer than 4 characters following "%u",
- or fewer than 2 characters following "%" or "%u".
-
- The unescape function computes a new version of a string value in which
- each escape sequences of the sort that might be introduced by the escape
- function is replaced with the character that it represents.
-
- When the unescape function is called with one argument string, the
- following steps are taken:
-
- 1. Call ToString(string).
- 2. Compute the number of characters in Result(1).
- 3. Let R be the empty string.
- 4. Let k be 0.
- 5. If k equals Result(2), return R.
- 6. Let c be the character at position k within Result(1).
- 7. If c is not %, go to step 18.
- 8. If k is greater than Result(2)-6, go to step 14.
- 9. If the character at position k+1 within result(1) is not u, go to step
- 14.
- 10. If the four characters at positions k+2, k+3, k+4, and k+5 within
- Result(1) are not all hexadecimal digits, go to step 14.
- 11. Let c be the character whose Unicode encoding is the integer represented
- by the four hexadecimal digits at positions k+2, k+3, k+4, and k+5
- within Result(1).
- 12. Increase k by 5.
- 13. Go to step 18.
- 14. If k is greater than Result(2)-3, go to step 18.
- 15. If the two characters at positions k+1 and k+2 within Result(1) are not
- both hexadecimal digits, go to step 18.
- 16. Let c be the character whose Unicode encoding is the integer represented
- by two zeroes plus the two hexadecimal digits at positions k+1 and k+2
- within Result(1).
- 17. Increase k by 2.
- 18. Let R be a new string value computed by concatenating the previous value
- of R and c.
- 19. Increase k by 1.
- 20. Go to step 5.
- Author: christine@netscape.com
- Date: 28 october 1997
-*/
-
-var SECTION = "15.1.2.5-2";
-var VERSION = "ECMA_1";
-startTest();
-var TITLE = "unescape(string)";
-
-writeHeaderToLog( SECTION + " "+ TITLE);
-
-// since there is only one character following "%", no conversion should occur.
-
-for ( var CHARCODE = 0; CHARCODE < 256; CHARCODE += 16 ) {
- new TestCase( SECTION,
- "unescape( %"+ (ToHexString(CHARCODE)).substring(0,1) +" )",
- "%"+(ToHexString(CHARCODE)).substring(0,1),
- unescape( "%" + (ToHexString(CHARCODE)).substring(0,1) ) );
-}
-
-// since there is only one character following "%u", no conversion should occur.
-
-for ( var CHARCODE = 0; CHARCODE < 256; CHARCODE +=16 ) {
- new TestCase( SECTION,
- "unescape( %u"+ (ToHexString(CHARCODE)).substring(0,1) +" )",
- "%u"+(ToHexString(CHARCODE)).substring(0,1),
- unescape( "%u" + (ToHexString(CHARCODE)).substring(0,1) ) );
-}
-
-
-// three char unicode string. no conversion should occur
-
-for ( var CHARCODE = 1024; CHARCODE < 65536; CHARCODE+= 1234 ) {
- new TestCase
- ( SECTION,
- "unescape( %u"+ (ToUnicodeString(CHARCODE)).substring(0,3)+ " )",
-
- "%u"+(ToUnicodeString(CHARCODE)).substring(0,3),
- unescape( "%u"+(ToUnicodeString(CHARCODE)).substring(0,3) )
- );
-}
-
-test();
-
-function ToUnicodeString( n ) {
- var string = ToHexString(n);
-
- for ( var PAD = (4 - string.length ); PAD > 0; PAD-- ) {
- string = "0" + string;
- }
-
- return string;
-}
-function ToHexString( n ) {
- var hex = new Array();
-
- for ( var mag = 1; Math.pow(16,mag) <= n ; mag++ ) {
- ;
- }
-
- for ( index = 0, mag -= 1; mag > 0; index++, mag-- ) {
- hex[index] = Math.floor( n / Math.pow(16,mag) );
- n -= Math.pow(16,mag) * Math.floor( n/Math.pow(16,mag) );
- }
-
- hex[hex.length] = n % 16;
-
- var string ="";
-
- for ( var index = 0 ; index < hex.length ; index++ ) {
- switch ( hex[index] ) {
- case 10:
- string += "A";
- break;
- case 11:
- string += "B";
- break;
- case 12:
- string += "C";
- break;
- case 13:
- string += "D";
- break;
- case 14:
- string += "E";
- break;
- case 15:
- string += "F";
- break;
- default:
- string += hex[index];
- }
- }
-
- if ( string.length == 1 ) {
- string = "0" + string;
- }
- return string;
-}